CORNELL DUBILIER TCX142U030J2C
Specifications
Manufacturer
Cornell Dubilier
Manufacturers Part #
TCX142U030J2C
Lead Time
26 Week Lead Time
Sub-Category
Aluminum Capacitors
Factory Pack Quantity
1
Datasheet
Extracted Text
Type TCX 105 ºC, Axial Leaded Aluminum Electrolytic Capacitors Extended Life Computer Grade Capacitor Type TCX is an axial leaded, 105 ºC, 2000 h extended life industrial and computer grade quality aluminum electrolytic capacitor with low DCL and ESR and is suitable for computer applications. Highlights • 105 ºC rated • Computer grade • Low DCL and ESR Specifications Capacitance Range: 27 to 12,000 µF Voltage Range: 10 to 150 WVdc Capacitance Tolerance: 10 to 75 WVdc, –10 +75% 100 to 150 WVdc, –10 +50% Operating Temperature Range: –55 ºC to 105 ºC DC Leakage Current: I= 2 √CV after 5 minutes Not to exceed 2 mA @ 25 ºC I = leakage current in µA C = Capacitance in µF V = Rated voltage I = Leakage current in µA Ripple Current Multipliers: Rated Ripple Multipliers WVdc 60 Hz 400 Hz 1000 Hz 2400 Hz 0 to 150 0.8 1.05 1.10 1.14 Ambient Temp. +45 ºC +55 ºC +65 ºC +75 ºC +85 ºC +95 ºC Ripple Multiplier 1.7 1.58 1.4 1.2 1.0 0.7 Apply WVdc for 2,000 h at 105 ºC QA Stability Test: • Capacitance change ±15% from initial limits • DC leakage current meets initial limits • ESR ≤150% of initial measured value Outline Drawing 1/32 Approx + - d Molded Parts are supplied with PVC insulating sleeve. Plastic Seal D Add .010" to diameter and .125" max ±.015 Vent to length to allow for insulation. 2.500 2.500 L ±.250 ±.031 ±.250 (Inches) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type TCX 105 ºC, Axial Leaded Aluminum Electrolytic Capacitors Ratings Size Size Max ESR Max Ripple Max ESR Max Ripple 120 Hz 120 Hz Diameter Length Lead 120 Hz 120 Hz Diameter Length Lead Catalog Cap Catalog 25 ºC 85 ºC D L Wire Cap 25 ºC 85 ºC D L Wire Part Number (µF) Part Number (Ω) (A) (Inches) (Inches) (d) (µF) (Ω) (A) (Inches) (Inches) (d) 10 WVdc ( 12 Vdc Surge ) 40 WVdc ( 50 Vdc Surge ) 10,000 TCX103U010L3C 0.053 5.952 0.875 3.125 0.040 4,200 TCX422U040N3L 0.047 6.361 1.000 3.625 0.040 15 WVdc ( 20 Vdc Surge ) 50 WVdc ( 65 Vdc Surge ) 1,000 TCX102U015J1C 0.295 1.394 0.750 1.125 0.040 250 TCX251U050G1G 0.39 0.947 0.625 1.375 0.032 2,100 TCX212U015J1L 0.136 2.337 0.750 1.625 0.040 370 TCX371U050L1C 0.326 1.250 0.875 1.125 0.040 8,200 TCX822U015N2L 0.042 5.796 1.000 2.625 0.040 500 TCX501U050G2C 0.663 1.624 0.625 2.125 0.032 12,000 TCX123U015N3L 0.025 7.589 1.000 3.625 0.040 710 TCX711U050N1G 0.224 1.989 1.000 1.375 0.040 25 WVdc ( 30 Vdc Surge ) 950 TCX951U050N1L 0.111 2.456 1.000 1.625 0.040 1,200 TCX122U025N1C 0.18 1.899 1.000 1.125 0.040 1,400 TCX142U050L2L 0.15 3.436 0.875 2.625 0.040 1,800 TCX182U025L1L 0.076 2.557 0.875 1.625 0.040 1,900 TCX192U050N2L 0.084 4.170 1.000 2.625 0.040 2,400 TCX242U025N1L 0.125 3.081 1.000 1.625 0.040 2,800 TCX282U050N3L 0.046 5.655 1.000 3.625 0.040 3,700 TCX372U025L2L 0.065 4.370 0.875 2.625 0.040 75 WVdc ( 95 Vdc Surge ) 7,200 TCX722U025N3L 0.031 6.882 1.000 3.625 0.040 65 TCX650U075G1C 2.961 0.419 0.625 1.125 0.032 30 WVdc ( 40 Vdc Surge ) 100 TCX101U075J1C 1.932 0.574 0.750 1.125 0.040 310 TCX311U030G1C 0.642 0.852 0.625 1.125 0.032 560 TCX561U075L2L 0.284 2.491 0.875 2.625 0.040 470 TCX471U030J1C 0.423 1.149 0.750 1.125 0.040 740 TCX741U075N2L 0.269 3.033 1.000 2.625 0.040 1,400 TCX142U030J2C 0.142 2.583 0.750 2.125 0.040 1,100 TCX112U075N3L 0.145 3.633 1.000 3.625 0.040 2,700 TCX272U030L2L 0.098 4.091 0.875 2.625 0.040 100 WVdc ( 125 Vdc Surge ) 3,000 TCX302U030L3C 0.088 4.643 0.875 3.125 0.040 110 TCX111T100L1G .404 0.996 0.875 1.375 0.040 40 WVdc ( 50 Vdc Surge ) 150 TCX151T100L1L 0.297 1.248 0.875 1.625 0.040 360 TCX361U040J1C 0.737 1.107 0.750 1.125 0.040 150 WVdc ( 175 Vdc Surge ) 1,000 TCX102U040L1L 0.463 2.290 0.875 1.625 0.040 27 TCX270T150G1C 5.720 0.322 0.625 1.125 0.032 1,400 TCX142U040J2L 0.189 3.107 0.750 2.625 0.040 150 TCX151T150J2L 0.404 1.224 0.750 2.625 0.040 2,100 TCX212U040L2L 0.126 3.975 0.875 2.625 0.040 Case Code Format for Type TCX Case Code Chart Case Code Chart Case Inches Millimeters d Case Inches Millimeters d Code D L D L Inches AWG Code D L D L Inches AWG E1G 0.500 1.375 12.7 34.9 0.032 #20 J3L 0.750 3.625 19.1 92.1 0.040 #18 E2C 0.500 2.125 12.7 53.9 0.032 #20 L1C 0.875 1.125 22.2 28.6 0.040 #18 G1C 0.625 1.125 15.9 28.6 0.032 #20 L1G 0.875 1.375 22.2 34.9 0.040 #18 G1G 0.625 1.375 15.9 34.9 0.032 #20 L1L 0.875 1.625 22.2 41.3 0.040 #18 G1L 0.625 1.625 15.9 41.3 0.032 #20 L2C 0.875 2.125 22.2 53.9 0.040 #18 G2C 0.625 2.125 15.9 53.9 0.032 #20 L2L 0.875 2.625 22.2 66.7 0.040 #18 G2L 0.625 2.625 15.9 66.7 0.032 #20 L3C 0.875 3.125 22.2 79.4 0.040 #18 G3C 0.625 3.125 15.9 79.4 0.032 #20 L3L 0.875 3.625 22.2 92.1 0.040 #18 G3L 0.625 3.625 15.9 92.1 0.032 #20 N1C 1.000 1.125 25.4 28.6 0.040 #18 J1C 0.750 1.125 19.1 28.6 0.040 #18 N1G 1.000 1.375 25.4 34.9 0.040 #18 J1G 0.750 1.375 19.1 34.9 0.040 #18 N1L 1.000 1.625 25.4 41.3 0.040 #18 J1L 0.750 1.625 19.1 41.3 0.040 #18 N2C 1.000 2.125 25.4 53.9 0.040 #18 J2C 0.750 2.125 19.1 53.9 0.040 #18 N2L 1.000 2.625 25.4 66.7 0.040 #18 J2L 0.750 2.625 19.1 66.7 0.040 #18 N3C 1.000 3.125 25.4 79.4 0.040 #18 J3C 0.750 3.125 19.1 79.4 0.040 #18 N3L 1.000 3.625 25.4 92.1 0.040 #18 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type TCX 105 ºC, Axial Leaded Aluminum Electrolytic Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the TCX142U030J2C?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Cap Aluminum Lytic 0.1F 40V -10% to 75% (63.5 X 117.48mm) Screw Terminal 0.005 Ohm 40600mA 5000h 105...
Cap Aluminum Lytic 1200uF 250V -10% to 50% (34.93 X 92.08mm) Screw Terminal 0.1326 Ohm 5000mA 5000h ...
Cap Aluminum Lytic 1900uF 250V -10% to 50% (34.93 X 130.18mm) Screw Terminal 0.091 Ohm 6900mA 5000h ...
Cap Aluminum Lytic 2300uF 250V -10% to 50% (44.45 X 104.78mm) Screw Terminal 0.069 Ohm 8400mA 5000h ...
Cap Aluminum Lytic 59000uF 63V -10% to 75% (76.2 X 92.08mm) Screw Terminal 0.008 Ohm 33800mA 5000h 1...
Manufacturers


What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods