Cosel Ordering information AC-DC Power Supplies Medical Type GHA500-SNF SERIES 500 Watt Enclosed with Fan Power Supply GH A 500 F -OO -SNFO GHA500F-SNF Measures: 6.50 x 3.35 x 1.61” 1 2 3 4 5 6 1Series name Recommended EMI/EMC Filter R 2Single output EAC-10-472 3Output wattage 4Universal input 5Output voltage 6Optional *6 J1 : CN501 VH(J.S.T.)connector type P : Pallarel Operation High voltage pulse noise type : EAP series Low leakage current type : EAM series Refer to the instruction manual * The EMI/EMC Filter is recommended to 5.1. connect with several devices. MODEL GHA500F-12-SNF GHA500F-15-SNF GHA500F-24-SNF GHA500F-30-SNF GHA500F-48-SNF GHA500F-56-SNF MAX OUTPUT WATTAGE[W] 450 501 504 501 504 504 Forced air DC OUTPUT +50C 12V 37.5A 15V 33.4A 24V 21.0A 30V 16.7A 48V 10.5A 56V 9.0A SPECIFICATIONS MODEL GHA500F-12-SNF GHA500F-15-SNF GHA500F-24-SNF GHA500F-30-SNF GHA500F-48-SNF GHA500F-56-SNF VOLTAGE[V] AC90 - 264 1f (output derating is required at AC90V -115V *3) ACIN 120V 4.8typ 5.4typ CURRENT[A] ACIN 230V 2.6typ 2.9typ FREQUENCY[Hz] 50 / 60 (47 - 63) ACIN 120V 87typ 89typ 89typ 89typ 89typ 89typ EFFICIENCY[%] ACIN 230V INPUT 89typ 91typ 91typ 91typ 91typ 91typ ACIN 120V 0.95typ POWER FACTOR (Io=100%) ACIN 230V 0.90typ ACIN 120V 20typ (Io=100%) (At cold start) (Ta=25C) INRUSH CURRENT[A] ACIN 230V 40typ (Io=100%) (At cold start) (Ta=25C) LEAKAGE CURRENT[mA] 0.125/0.250max (ACIN 120V/240V 60Hz,Io=100%, According to IEC60601-1) VOLTAGE[V] 12 15 24 30 48 56 CURRENT[A] Forced air 37.5 33.4 21.0 16.7 10.5 9.0 *4 LINE REGULATION[mV] 48max 60max 96max 120max 192max 192max LOAD REGULATION[mV] *4 100max 120max 150max 180max 240max 240max 0 to +50C 240max 240max 240max 300max 300max 400max RIPPLE[mVp-p] *1 -20 - 0C 320max 320max 320max 400max 400max 500max 0 to +50C 300max 300max 300max 480max 480max 500max *1 RIPPLE NOISE[mVp-p] OUTPUT -20 - 0C 360max 360max 360max 500max 500max 580max 0 to +50C 120max 150max 240max 300max 480max 480max TEMPERATURE REGULATION[mV] -20 to +50C 150max 180max 290max 360max 600max 600max *2 DRIFT[mV] 48max 60max 96max 120max 192max 192max START-UP TIME[ms] 500typ (ACIN 120V, Io=100%) HOLD-UP TIME[ms] 16typ (ACIN 120V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 13.50 to 16.50 21.60 to 26.40 27.00 to 31.50 43.20 to 52.80 52.00 to 56.00 10.80 to 13.20 OUTPUT VOLTAGE SETTING[V] 12.00 to 12.48 15.00 to 15.30 24.00 to 24.96 30.00 to 31.20 48.00 to 49.92 55.00 to 56.00 OVERCURRENT PROTECTION *7 Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION[V] 13.80 to 16.80 17.25 to 21.00 27.60 to 33.60 34.50 to 42.00 55.20 to 67.20 60.00 to 69.00 PROTECTION AUX1 12V 0.5A CIRCUIT AND AUX2 5V 1A OTHERS REMOTE ON/OFF Possible, AUX2 is available PowerGood Open corrector INPUT-OUTPUT-RC-AUX AC4,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) ISOLATION OUTPUT-RC-AUX-FG AC500V 1minute, Cutoff current = 25mA, DC500V 50MW min (At Room Temperature) OUTPUT-RC-AUX AC500V 1minute, Cutoff current = 25mA, DC500V 50MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +70C, 20 - 90%RH (Non condensing), 3,000m (10,000feet) max *3 STORAGE TEMP.,HUMID.AND ALTITUDE -30 to +80C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT 2 VIBRATION 10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis 2 IMPACT 196.1m/s (20G), 11ms, once each X, Y and Z axis AGENCY APPROVALS UL60950-1, ANSI/AAMI ES60601-1, C-UL(CSA60950-1, CAN/CSA60601-1), EN60950-1, EN60601-1 3rd SAFETY AND CONDUCTED NOISE NOISE Complies with FCC-B, VCCI-B, CISPR11-B, CISPR22-B, EN55011-B, EN55022-B REGULATIONS HARMONIC ATTENUATOR *5 Complies with IEC61000-3-2 (class A) CASE SIZE/WEIGHT 85.2X41X165.3mm [3.35X1.61X6.5 inches] (WXHXD) / 660g max GHA OTHERS COOLING METHOD Forced air *1 This is the value that measured on measuring board with capacitor of 22mF at 150mm from *6 Specifi cation is changed at option, refer to Instruction Manual. output terminal. *7 When output current more than rated, output will shut down after 5 seconds or more. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM103). Recycle input after 3 minutes to reset the protection. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25 C, with * To meet the specifi cations. Do not operate over-loaded condition. the input voltage held constant at the rated input/output. * Sound noise may be generated by power supply in case of pulse load. *3 Derating is required. * Parallel operation is available with -P option. Refer to 5.1on the instruction manual. *4 Please contact us about dynamic load and input response. *5 Please contact us about another class. GHA-6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/cosel-GHA500-power-supply.html h t t p: / / pow e r. sa ge r. c om me ghaindd GHA-6 2015/09/18 13:12:14 GHA Cosel GHA500-SNF SERIES GHA500F-SNF 500 Watt Enclosed with Fan Power Supply Measures: 6.50 x 3.35 x 1.61” Features -Full packaged desin united with GHA's features and addtional robastness.. -High efficiency 91% typ (Input voltage 230V,Output voltage 24V) -50% minimized size compare with privious products. -Optical for 1U applications -Medical and Industrial safety approvals -Low leakage current -Conformal coating -Single remote ON/OFF control for DC output, AUX1 and Fan. -Isolated dual AUX (AUX1 12V 0.5A, AUX2 5V 1A) Block diagram BOOSTER CURRENT FUSE INDUCTOR SENSING INRUSH 250V10A 2 NOISE AC IN 90 - 264V RECTIFIER CURRENT FILTER LIMIT INVERTER FG RECTIFIER AND FILTER CONTROL TRANSFORMER RECTIFIER INVERTER AND AUX1(12V 0.5A) FILTER RECTIFIER CURRENT AND DC OUT SENSING FILTER INTERNAL CONTROL REGULATOR Photocoupler OVER VOLTAGE PROTECTION Photocoupler PG(POWER GOOD) CONTROL RC(REMOTE ON/OFF) TRANSFORMER RECTIFIER AUX2(5V 1A) AND FILTER External view M4 2-M4 23.3 Name plate (AC,FG) 21.6 Mounting Holes [0.92] [0.85] FG Output voltage adjust (Bottom side) Cover AC(N) CN501 AC(L) Output(-) Output(+) Point A 22.8 6 [0.24] 134.5±0.5 [0.90] [5.30±0.02] 18max 15max 165.3 [0.60max] [6.50] [0.70max] 15 115.6 ±0.5 [0.60] [4.55±0.02] Mating I/OConnector Terminal connector CN501 087833-6320 51110-0851 50394-8051 AIR FLOW (Mfr : Molex) M4 2-M4 (Output(+),Output(-)) Mounting Holes Tolerance ±1 [±0.04] Pin No. Function Weight : 660g max 1 AUX1 : AUX1 (12V0.5A) GHA Upper PCB Material/thickness : FR-4/1.6mm Lower PCB Material/thickness : AL/1.5mm 2 AUX1G : AUX1 (GND) Chassis Material/thickness : Aluminum/1.5mm 3 RC : REMOTE ON/OFF Cover Material/thickness : Aluminum/1.2mm 4 RCG : REMOTE ON/OFF (GND) Fan cover Material : PBT Mounting torque : 1.5N m (14.7kgf cm) max 5 PG : Power good Screw tightening torque M4 : 1.6N m (16.9kgf cm) max 6 PGG : Power good (GND） Dimensions in mm, [ ]=inches CN501 7 AUX2 : AUX2 (5V1A) 8 AUX2G: AUX2 (GND) GHA-7 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/cosel-GHA500-power-supply.html meghaindd GHA-7 2015/09/18 13:12:16 h t t p: / / pow e r. sa ge r. c om 62.5 [2.46] [3.35] 41 ±0.5 85.2 [1.61±0.02] 50.8 [2.00] 9.5 [0.37] 25.5 17 [1.00] [0.67] 8.6 [0.34] 10.5 10.5 [0.41] [0.41] 53 [2.10] CAUTION DOUBLE POLE/NEUTRAL FUSING 78 12 78 1 2