Cosel Ordering information AC-DC Power Supplies Medical type GHA500 SERIES 500 Watt Open Frame Power Supply GH A 500 F -OO -O GHA500F Measures: 5.00 x 3.00 x 1.40” 1 2 3 4 5 6 1 Series name Recommended EMI/EMC Filter R 2 Single output EAC-10-472 3 Output wattage 4 Universal input 5 Output voltage 6 Optional *6 T3 : mounting hole M3 J1 : VH(J.S.T.)connector type R3 : with Subfeatures High voltage pulse noise type : EAP series ( 5VAUX,12VAUX,Remote, Low leakage current type : EAM series Power good) Photo is an image of the appearance. * The EMI/EMC Filter is recommended to P : Pallarel Operation Information the Home page is the latest. May differ from the actual product. connect with several devices. Specification is changed at 【Cautions】 option, refer to Instruction 　・Forced air cooling is required for the maximum output power. Please see instruction manual. manual. 　・Avoid applying stress to surface mount components. 　・De-rating is required if the applied input voltage is 90-115VAC. 　・The electrolytic capacitor has limited life span which is very much dependent on the actual operating conditions. 　・Operating in the presense of chemical vapors or harsh environmnet can affect the power supply life expectnacy. 　・Please make sure to read the instruction manual carefully before using this product. 　It should be in the "Instruction Manual" not spec sheet. MODEL GHA500F-12 GHA500F-15 GHA500F-24 GHA500F-48 MAX OUTPUT WATTAGE[W] 500.8 501 504 504 Forced air at 50C 12V 41.7A 15V 33.4A 24V 21.0A 48V 10.5A at 40C 12V 12.5A 15V 10.0A 24V 6.3A 48V 3.2A Convection DC OUTPUT at 50C 12V 9.2A 15V 7.4A 24V 4.6A 48V 2.3A conduction at 0C 12V 30.0A 15V 24.0A 24V 15.0A 48V 7.5A cooling at 50C 12V 16.7A 15V 13.4A 24V 8.4A 48V 4.2A SPECIFICATIONS MODEL GHA500F-12 GHA500F-15 GHA500F-24 GHA500F-48 VOLTAGE[V] AC90 - 264 1f (output derating is required at AC90V -115V *3) ACIN 120V 5.4typ CURRENT[A] ACIN 230V 2.9typ FREQUENCY[Hz] 50 / 60 (47 - 63) ACIN 120V 88typ 90typ 90typ 90typ EFFICIENCY[%] INPUT ACIN 230V 90typ 92typ 92typ 92typ POWER FACTOR ACIN 120V 0.95typ (Io=100%) ACIN 230V 0.90typ ACIN 120V 20typ (Io=100%) (At cold start) (Ta=25C) INRUSH CURRENT[A] ACIN 230V 40typ (Io=100%) (At cold start) (Ta=25C) LEAKAGE CURRENT[mA] 0.125/0.250max (ACIN 120V/240V 60Hz,Io=100%, According to IEC60601-1) VOLTAGE[V] 12 15 24 48 Forced air 41.7 33.4 21.0 10.5 CURRENT[A] Convection 9.2 7.4 4.6 2.3 conduction cooling 16.7 13.4 8.4 4.2 *4 48max 60max 96max 192max LINE REGULATION[mV] *4 LOAD REGULATION[mV] 100max 120max 150max 240max 0 to +50C 240max 240max 240max 300max *1 RIPPLE[mVp-p] -20 - 0C 320max 320max 320max 400max OUTPUT 0 to +50C 300max 300max 300max 480max *1 RIPPLE NOISE[mVp-p] -20 - 0C 360max 360max 360max 500max 0 to +50C 120max 120max 240max 480max TEMPERATURE REGULATION[mV] -20 to +50C 150max 150max 290max 600max DRIFT[mV] *2 48max 60max 96max 192max START-UP TIME[ms] 500typ (ACIN 120V, Io=100%) HOLD-UP TIME[ms] 16typ (ACIN 120V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 10.80 to 13.20 13.50 to 16.50 21.60 to 26.40 43.20 to 52.80 OUTPUT VOLTAGE SETTING[V] 12.00 to 12.48 15.00 to 15.30 24.00 to 24.96 48.00 to 49.92 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION[V] 13.80 to 16.80 17.25 to 21.00 27.60 to 33.60 55.20 to 67.20 PROTECTION AUX1 (12V1A) Optional CIRCUIT AND AUX2 (5V1A) Optional OTHERS REMOTE ON/OFF Optional PowerGood Optional INPUT-OUTPUT-RC-AUX *7 AC4,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) ISOLATION OUTPUT-RC-AUX-FG *7 AC500V 1minute, Cutoff current = 25mA, DC500V 50MW min (At Room Temperature) *7 AC500V 1minute, Cutoff current = 25mA, DC500V 50MW min (At Room Temperature) OUTPUT-RC-AUX OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +80C, 20 - 90%RH (Non condensing) STORAGE TEMP.,HUMID.AND ALTITUDE -30 to +80C, 20 - 90%RH (Non condensing) ENVIRONMENT 2 VIBRATION 10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis GHA 2 IMPACT 196.1m/s (20G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, ANSI/AMII ES60601-1, C-UL, EN60950-1, EN60601-1 NOISE CONDUCTED NOISE Complies with FCC-B, VCCI-B, CISPR11-B, CISPR22-B, EN55011-B, EN55022-B *5 REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 (class A) CASE SIZE/WEIGHT 76.2X35X127mm [3.0X1.4X5.0 inches] (WXHXD) / 420g max OTHERS COOLING METHOD Convection, Forced air (Require external fan), Conduction cooling *1 This is the value that measured on measuring board with capacitor of 22mF at 150mm from *5 Please contact us about another class. output terminal. *6 Specification is changed at option, refer to Instruction Manual. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM103). *7 Applicable when AUX and remote control (optional) is added. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with * To meet the specifications. Do not operate over-loaded condition. the input voltage held constant at the rated input/output. * Sound noise may be generated by power supply in case of pulse load. *3 Derating is required. * Parallel operation is not possible. *4 Please contact us about dynamic load and input response. GHA-4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/cosel-GHA500-power-supply.html h t t p: / / pow e r. sa ge r. c om me ghaindd GHA-4 2014/01/09 17:05:53 Cosel GHA500 SERIES GHA500F 500 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.40” Features -Wattage 500W max 3 -High Power density:24.1W/inch -High efficiency 92％ typ (Input Voltage 230V,Output Voltage 24V) -Conduction cooling -３"X５"standard footprint -Fits 1U applications -Industrial and Medical safety approvals -Low leakage current -With Remote On/Off (Optional) -With AUX1 (5V), AUX2 (12V) (Optional) -No minimum load is required Block diagram BOOSTER CURRENT INDUCTER SENSING FUSE INRUSH 250V10A X2 NOISE AC IN 90 - 264V RECTIFIER CURRENT FILTER LIMIT INVERTER FG RECTIFIER AND FILTER CONTROL TRANSFORMER RECTIFIER AUX1(12V 1A) INVERTER AND FILTER RECTIFIER CURRENT AND DC OUT SENSING FILTER INTERNAL CONTROL REGULATOR Photocoupler OVER VOLTAGE PROTECTION Photocoupler PG(POWER GOOD) CONTROL RC(REMOTE ON/OFF) TRANSFORMER RECTIFIER AUX2(5V 1A) AND FILTER External view 4-f3.4(with Mounting Holes M3) 5.7 115.6 ±0.5 Mating I/OConnector Terminal Mfr connector [4.55] Mounting Holes [0.22] 08-50-0105 CN101 A-41671-A03A197-2 09-50-8031 08-65-0114 TB501 MOLEX CN501 OUTPUT(+) 087831-0820 51110-0851 50394-8051 （Optional） CN101 TB502 B2P3-VH VHR-3N SVH-21T-P1.1 OUTPUT(-) （Optional） J.S.T. CN101 CN501 2 1 B8B-PHDSS PHDR-08VS SPHD-002T-P0.5 3 AC(N) CN501 （Optional） 8 7 1 AC(L) FG FG Mating connector Terminal Mfr - 250 Series - 170603-2 Tyco Electronics 119.7 with Subfeatures(Optional) [4.71] 124.1 Voltage adjust [4.89] Pin No. Input 127.0 1 AC(L) [5.00] 2 Name plate 3 AC(N) GHA 2 1 Pin No. Function 1 AUX1 : AUX1 （12V1A) 2 AUX1G : AUX1 （GND) 3 RC1 : REMOTE ON/OFF 8 7 ¶ Tolerance ±1 [±0.04] 4 ¶ Weight : 420g max RCG : REMOTE ON/OFF（GND) ¶ There is a total of four attachment holes. CN501 5 PG : Power good ¶ Base Plate : Aluminum 6 PGG : Power good（GND） ¶ Dimensions in mm, [ ]=inches ¶ Screw tightening torque : (TB501, 502) : 1.5N-m max 7 AUX2 : AUX2 （5V1A) ¶ Mounting toque : 0.6N-m max 8 AUX2G: AUX2 （GND) ¶ Avoid contact between TB501 and 502 wiring with mounting parts. ¶ Option : -J1 : (J.S.T) connector type. Refer to Instruction Manual 5. GHA-5 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/cosel-GHA500-power-supply.html meghaindd GHA-5 2014/01/09 17:05:58 h t t p: / / pow e r. sa ge r. c om 76.2 [3.00] 5.7 ±0.5 64.8 35 [0.22] [2.55] [1.38] 16.5 [0.65] 17.0 24.5 [0.67] [0.96] 38.0 18.0 [1.50] [0.71]