Cosel KLNA120F SERIES 120 Watt DIN Rail Mount Power Supply Measures: 4.88 x 4.77 x 1.50” Ordering information AC-DC Power Supplies DIN Rail Type KLO A 120 F -OO -O KLEA/KLNA120F 1 2 3 4 5 6 1Series name Recommended EMI/EMC Filter R KLE : Euro Style I/O Terminals NAC-04-472-D KLN : Barrier Blocks Style I/O Terminals 2Single output 3Output wattage 4Universal input 5Output voltage 6Option High voltage pulse noise type : NAP series C : with Coating Low leakage current type : NAM series N2 : Screw mounting * The EMI/EMC Filter is recommended to connect with several devices. MODEL KLEA/KLNA120F-24 KLEA/KLNA120F-48 MAX OUTPUT WATTAGE[W] 120 120 DC OUTPUT 24V 5A 48V 2.5A SPECIFICATIONS MODEL KLEA/KLNA120F-24 KLEA/KLNA120F-48 VOLTAGE[V] *9 AC85 - 264 1f (Output derating is required) ACIN 115V 1.2typ CURRENT[A] ACIN 230V 0.6typ FREQUENCY[Hz] 50 / 60 (47 - 63) ACIN 115V 86.5typ EFFICIENCY[%] ACIN 230V 88.0typ INPUT ACIN 115V 0.98typ POWER FACTOR ACIN 230V 0.90typ INRUSH CURRENT[A] ACIN 115V 20typ (Io=100%)(at cold start Ta=25C) *1 ACIN 230V 40typ (Io=100%)(at cold start Ta=25C) LEAKAGE CURRENT[mA] 0.45 / 0.75max (ACIN 100V / 240V 60Hz, Io=100%, According to IEC60950-1 and DEN-AN) VOLTAGE[V] 24 48 CURRENT[A]5 2.5 *2 *8 *8 LINE REGULATION[mV] 96max (Io=30-100%) 192max (Io=30-100%) *2 *8 *8 LOAD REGULATION[mV] 150max (Io=30-100%) 300max (Io=30-100%) 0 to +70C 150max 150max RIPPLE[mVp-p] *3 -20 - 0C 240max 240max Io=0 - 30%500max 650max 0 to +70C 180max 180max OUTPUT *3 -20 - 0C 300max 300max RIPPLE NOISE[mVp-p] Io=0 - 30%500max 650max 0 to +70C240max 480max TEMPERATURE REGULATION[mV] -20 to +70C290max 600max DRIFT[mV] *4 96max 192max START-UP TIME[ms] 500typ (ACIN 115V, Io=100%) HOLD-UP TIME[ms] 20typ (ACIN 115V, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 21.60 to 26.40 43.20 to 52.80 OUTPUT VOLTAGE SETTING[V] 24.00 to 24.96 48.00 to 49.92 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically PROTECTION CIRCUIT AND OVERVOLTAGE PROTECTION[V] 27.60 to 33.60 54.00 to 67.20 OTHERS DC_OK LAMP LED (Green) INPUT-OUTPUT AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min （At Room Temperature） ISOLATION INPUT-PE AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min （At Room Temperature） OUTPUT-PE AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min （At Room Temperature） OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +70C (Required to Derating), 20 - 90%RH (Non condensing) STORAGE TEMP.,HUMID.AND ALTITUDE -30 to +85C, 20 - 90%RH (Non condensing) ENVIRONMENT 2 *7 VIBRATION 10 - 55Hz, 19.6m/s (2G), 3minutes period, 60 minutes along Z axis (Non operating, mounted on DIN Rail) 2 IMPACT 196.1m/s (20G), 11ms, once each X, Y and Z axis (Packing state) KL AGENCY APPROVALS UL60950-1, C-UL (CSA60950-1), EN60950-1, UL508, Complies with DEN-AN SAFETY AND NOISE CONDUCTED NOISE Complies with FCC-B, VCCI-B, CISPR22-B, EN55011-B, EN55022-B REGULATIONS *5 HARMONIC ATTENUATOR Complies with IEC61000-3-2 （Class A) CASE SIZE *6 38X124X117mm (WXHXD) [1.5X4.88X4.61 inches] OTHERS WEIGHT 580g max COOLING METHOD Convection / Forced air *1 The value is primar y surge. The current of input surge to a built-in EMI/EMC *4 Drift is the change in DC output for an eight hour period after a half-hour *8 Burst operation at 30% load or less. Filter(0.2ms or less)is excluded. warm-up at 25C, with the input voltage held constant at the rated input/ *9 Please contact us about DC input voltage. *2 Please contact us about dynamic load and input response. output. * To meet the specifi cations. Do not operate over-loaded condition. *3 This is the value that measured on measuring board with capacitor of 22mF *5 Please contact us about another class. * A sound may occur from power supply at light or peak loading. and 0.1mF at 150mm from output terminal. *6 Case size contains neither the umbo. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to *7 Only as standard mounting orientation (A). Refer to the instruction manual 4.1. KEISOKU-GIKEN: RM103). If install other than standard mounting orientation (A), please fi x the power Please refer to the instruction manual 2.5. supply for withstand the vibration and impact. KL-2 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/cosel-KlNA120F-power-supply.html h t t p: / / pow e r. sa ge r. c om meklindd KL-2 2015/07/28 9:29:20 Cosel KLNA120F SERIES 120 Watt DIN Rail Mount Power Supply KL series Measures: 4.88 x 4.77 x 1.50” Block diagram FUSE 250V 4A INRUSH NOISE CURRENT AC IN 85 264V RECTIFIER FILTER LIMIT PE BOOSTER CURRENT INDUCTOR SENSING TRANSFORMER RECTIFIER RECTIFIER AND INVERTER AND DC OUT FILTER FILTER INVERTER CURRENT SENSING Photocoupler CONTROL Photocoupler OVER VOLTAGE CONTROL PROTECTION External view 9 10 9.5 6.4 2 111.2 111.2 6-M4 [0.37] [0.25] [4.38] [0.35] [0.39] [0.08] [4.38] TB2 TB2 +VOUT +VOUT -VOUT -VOUT LED (DC_OK) LED(DC_OK) Name plate Name plate Output voltage Output voltage adjustable potentiometer adjustable potentiometer AC(L) AC(L) AC(N) AC(N) PE PE TB1 TB1 11.2 117 11.2 117 [0.44] [4.61] [0.44] [4.61] 9.5 9.5 121.2 9 10 121.2 [0.37] [0.37] [4.77] [0.39] [0.35] [4.77] 38 38 [1.5] [1.5] Tolerance : ±1.5 [±0.06] Tolerance : ±1.5 [±0.06] Weight : 580g max Weight : 580g max PCB Material/thickness : FR-4 / 1.6mm [0.06] PCB Material/thickness : FR-4 / 1.6mm [0.06] KL Chassis material : Aluminum Chassis material : Aluminum Case material : Stainless steel Case material : Stainless steel Din rail attachment material : Aluminum, Nylon Din rail attachment material : Aluminum, Nylon Dimensions in mm, [ ] = inches Dimensions in mm, [ ] = inches Screw tightening torque : 1N m max Screw tightening torque : 1.6N m max Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/cosel-KlNA120F-power-supply.html h t t p: / / pow e r. sa ge r. c om KL-3 me klindd KL-3 2015/07/28 9:29:31 69 [2.72] 7.5 109 [0.3] [4.29] 124 [4.88] 113.2 6.6 [4.46] [0.26] 4.2 6.6 [0.17] [0.26] (65.7) [2.59] 133.5 [5.26] 69 [2.72] 9.3 105.4 [0.37] [4.15] 124 [4.88] 108.9 14.6 [4.29] [0.57] 0.5 14.6 [0.02] [0.57] (65.7) [2.59] 133.5 [5.26]