COSEL TUNS700F12

COSEL TUNS700 SERIES 700 Watt Power Supply Measures: 4.62 x 2.42 x 0.50” Ordering information AC-DC Power Supplies Power Module type TUN S 700 F 48 -O TUNS700F 1 2 3 4 5 6 1Series name R 2Single output 3Output wattage 4Universal Input 5Output voltage 6Optional T : with Mounting hole (f3.4 thru) Y1: Outputvoltage adjustment range ±20% (Only 48V) R1: with Remote ON/OFF R2: with Remote ON/OFF (Low standby power) P : Parallel operation *Avoid short circuit between +BC/R and -BC. It may cause the failure of inside components. *Keep TRM open, if output voltage adjustment is not necessary. *If remote sensing is not necessary, connect between +Vout & +S and between -Vout & -S. MODEL TUNS700F12 TUNS700F28 TUNS700F48 MAX OUTPUT WATTAGE[W] 700.8 700.0 700.8 DC OUTPUT 12V 58.4A 28V 25A 48V 14.6A SPECIFICATIONS MODEL TUNS700F12 TUNS700F28 TUNS700F48 VOLTAGE[V] AC85 - 264 1f ACIN 100V 8.6typ (Io=100%) CURRENT[A] ACIN 200V 4.1typ (Io=100%) FREQUENCY[Hz] 50/60 (47 - 63) ACIN 100V 83typ 86typ 87typ INPUT EFFICIENCY[%] ACIN 200V 86typ 89typ 90typ POWER FACTOR ACIN 100V 0.96typ (Io=100%) ACIN 200V 0.93typ INRUSH CURRENT Limited by external resistance 0.75max (ACIN 240V 60Hz, Io=100%, According to IEC60950-1) LEAKAGE CURRENT[mA] VOLTAGE[V] 12 28 48 CURRENT[A] 58.4 25 14.6 LINE REGULATION[mV] 24max 56max 96max LOAD REGULATION[mV] 24max 56max 96max *1 120max 180max 250max 0 to +100C RIPPLE[mVp-p] -40 to 0C*1 150max 200max 300max *1 150max 200max 300max 0 to +100C OUTPUT RIPPLE NOISE[mVp-p] *1 -40 to 0C 200max 300max 450max 0 to +65C 120max 280max 480max TEMPERATURE REGULATION[mV] -40 to +100C 240max 560max 960max *2 DRIFT[mV] 40max 90max 180max OUTPUT VOLTAGE ADJUSTMENT Fixed (TRM pin open), adjustable by external resistor or external signal RANGE[V] 9.60 - 14.40 22.40 - 33.60 38.40 - 52.80 (-Y1 Option : 38.4 - 57.6) OUTPUT VOLTAGE SETTING[V] 11.91 - 12.29 27.56 - 28.44 47.24 - 48.76 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically TUNS PROTECTION OVERVOLTAGE PROTECTION[V] 15.00 - 16.80 35.00 - 39.20 55.20 - 64.80 (-Y1 Option : 60.0 - 67.2) CIRCUIT AND REMOTE SENSING Provided OTHERS REMOTE ON/OFF Optional (External power supply is required) MODEL TUNS700F12-P TUNS700F28-P TUNS700F48-P MAX OUTPUT WATTAGE[W] 700.8 700.0 700.8 DC OUTPUT 12V 58.4A 28V 25A 48V 14.6A SPECIFICATIONS MODEL TUNS700F12-P TUNS700F28-P TUNS700F48-P VOLTAGE[V] AC85 - 264 1f ACIN 100V 8.6typ (Io=100%) CURRENT[A] ACIN 200V 4.1typ (Io=100%) FREQUENCY[Hz] 50/60 (47 - 63) ACIN 100V 83typ 86typ 87typ INPUT EFFICIENCY[%] ACIN 200V 86typ 89typ 90typ POWER FACTOR ACIN 100V 0.96typ (Io=100%) ACIN 200V 0.93typ INRUSH CURRENT Limited by external resistance LEAKAGE CURRENT[mA] 0.75max (ACIN 240V 60Hz, Io=100%, According to IEC60950-1) VOLTAGE[V] 12 28 48 CURRENT[A] 58.4 25 14.6 VOLTAGE ACCURACY[%] +5, -3 +5, -3 +5, -3 *1 0 to +100C 240max 360max 600max OUTPUT RIPPLE[mVp-p] -40 to 0C *1 300max 400max 700max *1 360max 540max 900max 0 to +30% Load 0 to +100C *1 300max 400max 700max RIPPLE NOISE[mVp-p] *1 400max 600max 1000max -40 to 0C *1 0 to +30% Load 450max 600max 1000max PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION[V] 15.00 - 16.80 35.00 - 39.20 55.20 - 64.80 CIRCUIT AND OTHERS REMOTE ON/OFF Optional (External power supply is required) TUNS-10 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 metunsindd TUNS-10 2015/05/19 10:49:57 power@sager .com http://power.sager.com/cosel-tuns700-power-supply.html http://power.sager.com COSEL TUNS700 SERIES 700 Watt Power Supply Measures: 4.62 x 2.42 x 0.50” TUNS700F GENERAL SPECIFICATIONS *4 INPUT-OUTPUT-RC AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) INPUT-FG AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C) ISOLATION OUTPUT-RC-FG *4 AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C) *4 OUTPUT-RC AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (20±15C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max ENVIRONMENT 2 VIBRATION 10 - 55Hz, 49.0m/s (5G), 3minutes period, 60minutes each along X, Y and Z axis 2 IMPACT 196.1m/s (20G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL (CSA60950-1), EN60950-1 SAFETY AND NOISE REGULATIONS HARMONIC ATTENUATOR *3 Complies with IEC61000-3-2 (Class A) CASE SIZE/WEIGHT 117.3X12.7X61.5mm [4.62X0.5X2.42 inches] (WXHXD) / 190g max OTHERS COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) *1 Refer to instruction manual for measuring method of electric characteristics. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. *3 Please contact us about another class. *4 ”RC” is applicable when remote control (optional) is added. External view Base Plate (Aluminum) Recommending size for processing PCB Lot No. (TOP VIEW) 11- 1.5 15 15 44.05 4- 3.5 [0.59] [0.59] [1.73] Case (PBT) 117.3 max [4.62] 106.7 ±0.5 [4.2] (5.3) 2- 2 ±0.2 [0.21] 2- 2.5 4 [0.16] 106.7 [4.2] mm Dimensions in : [inch] 4 Div. : 0.5inch [0.16] 15 15 44.05 Name Plate 11- 1 ±0.1 TUNS Tolerance : 0.3 [ 0.012] 4-M3 [0.59] [0.59] [1.73] Weight : 190g max Mounting Hole Control pin for Remote Dimensions in mm, [ ]=inches ON/OFF (Option) Mounting hole screwing torque : 0.49N m (5.0kgf cm) max AC1 -VOUT AC2 +VOUT -S, -M (Option : P) +S, +M (Option : P) TRM, NC (Option : P) IOG 4-FG R +BC -BC RC2 (Option : R1/R2) RC1 (Option : R1/R2) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/cosel-tuns700-power-supply.html http://power.sager.com TUNS-11 metunsindd TUNS-11 2015/05/19 10:50:02 10 10.2 [0.39] [0.4] (5.35) ±0.5 50.8 5.0 ±0.5 12.7 ±0.5 [0.21] [2.0] [0.2] [0.5] 61.5 max [2.42] 3×4=12 9 10 10.2 [0.47] [0.35] [0.39] [0.4] 10.2 10 9 3×4=12 [0.4] [0.39] [0.35] [0.47] 50.8 [2.0]