127-P10-H-KF-8A - E-T-A - Electronics Finder

Description

Circuit Breaker Thermal 1Pole 8A 250VAC/28VDC

Part Number

127-P10-H-KF-8A

Price

Request Quote

Manufacturer

E-T-A

Lead Time

Request Quote

Category

Circuit Protection » Circuit Breaker

Specifications

Manufacturer

E-T-A

Manufacturers Part #

127-P10-H-KF-8A

Sub-Category

Circuit Breakers

Factory Pack Quantity

Datasheet

D_127_e_060206.pdf

110 KiB

Download

Extracted Text

Thermal Overcurrent Circuit Breaker 127-... Description Single pole thermal circuit breaker with push-to-reset, tease-free, trip- free, snap action mechanism (R-type TO CBE to EN 60934; M-type when fitted with optional manual release feature). Available in versions for plug-in or integral mounting, track mounting, or with a frame for snap-in panel mounting. The optional -KF housing is particularly suited to high humidity and other damp conditions. Approved to CBE standard EN 60934 (IEC 60934). 1 Typical applications Motors, transformers, solenoids, battery chargers, extra low voltage systems. 127-F-... 127-T11-... Ordering information Technical data Type No. For further details please see chapter: Technical Information 127 Voltage rating AC 250 V; DC 28 V Mounting options (UL: AC 250 V; DC 50 V) leave blank for integral/plug-in option Current ratings 0.05...25 A F for snap-in mounting T11 track mounting with captive stud terminals M4 Typical life 0.05...16 A 5,000 operations at 2 x I , inductive N T12 track mounting with screw terminals M4 17...25 A 5,000 operations at 2 x I , resistive N Terminal design (for use with and without flange -F) Ambient temperature -20...+60 °C (-4...+140 °F) P10 blade terminals A6.3-0.8 (QC .250) Insulation co-ordination rated impulse pollution K10 screw terminals M4x6 (IEC 60664 and 60664 A) withstand voltage degree Manual release (optional) 2.5 kV 2 H manual release facility reinforced insulation in operating area Special housing (optional) KF for tropical and high humidity conditions Dielectric strength (not for -T11 and -T12) (IEC 60664 and 60664A) test voltage Current ratings operating area AC 3,000 V 0.05...25 A Insulation resistance > 100 MΩ (DC 500 V) Interrupting capacity I type -F: 0.05 ...2.5 A 8 x I 127 - F - P10 -H - .. - 10 A = ordering example cn N 3...5 A 20 x I N 6...12 A 200 A The exact part number required can be built up from the table of choices shown above. Ordering references for optional features should be omitted if not required. 13...25 A 400 A type -T: 0.05...2.5 A 8 x I N 3...5 A 20 x I N 6...25 A 400 A Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Vibration 8 g (57-500 Hz) ±0.61 mm (10-57 Hz) to IEC 60068-2-6, test Fc, 10 frequency cycles/axis Standard current ratings and typical internal resistance values Shock 25 g (11 ms), to IEC 60068-2-27, test Ea Corrosion 96 hours at 5 % salt mist, Current Internal Current Internal to IEC 60068-2-11, test Ka rating (A) resistance (Ω) rating (A) resistance (Ω) Humidity 240 hours at 95 % RH 0.05 280 1.5 0.6 to IEC 60068-2-3, test Db 0.08 100 1.8 0.4 Mass 127-F-..: approx. 24 g 0.1 110 2 0.3 127-T..-: approx. 35 g 0.15 56 2.5 0.2 0.2 29 3 0.1 0.25 18 3.5 0.06 0.3 14 4 0.06 0.35 9.8 4.5 0.05 0.4 7 5 0.05 0.45 5.9 6 0.02 Approvals 0.5 4.9 7 0.02 0.6 3.4 8 0.02 Authority Voltage ratings Current ratings 0.7 2.5 10 < 0.02 VDE (EN 60934) AC 250 V; DC 28 V 0.05...25 A 0.8 1.8 15 < 0.02 CSA, UL AC 250 V 0.1...20 A 0.9 1.5 16 < 0.02 DC 50 V 0.1...25 A 1 1.2 20 < 0.02 CCC AC 250 V 0.05...25 A 1.2 0.8 25 < 0.02 Type 127-T..- approvals N/A 06/07 www.e-t-a.com 1 - 19 Thermal Overcurrent Circuit Breaker 127-... Dimensions Installation drawings 127-F-P10-H 127-F operating area ø4 .157 1 19.8 .780 mounting area 31 11.5 blade terminal 1.22 .453 DIN 46244-A6.3-0.8 (QC .250) 127-T11 operating area 41.5 1.63 a III 1 mm inch mm inch ±0.1 ± ±0.1 ± .039 a 38 1.50 .004 38.4 1.51 .004 b 1-2.5 .039-.098 2.6-4 .102-.157 127-T11 31 1.22 ø4 11.5 .157 .453 mounting area 127-T12 operating area 13 .512 M4 1 .039 spacing 14 44 tightening torque .551 1.73 for M4 max. 1.2 Nm 54 G profile 2.13 EN 50035-G... 127-T12 31 1.22 ø4 11.5 .157 .453 mounting area 13 Terminal design 127-F-K10 .512 M4 spacing 14 44 tightening torque .551 1.73 for M4 max. 1.2 Nm flat head screw M4x6 ISO 1580 54 G profile tightening torque max. 1.2 Nm 2.13 EN 50035-G... mm This is a metric design and millimeter dimensions take precedence ( ) inch 1 - 20 www.e-t-a.com 06/07 OFF 63 63 16 11.5 2.48 2.48 .630 .453 52 52 6.5 ON 2.05 2.05 .256 6 ON 6 ON .236 .236 9.4 2 OFF OFF 12 12 .370 .079 45 .472 .472 1.77 47 47 1.85 1.85 7 7 .276 .276 ±0.2 b 14.5 ± .571 .008 53 53 max. 2 2.09 2.09 max .079 34 34 1.34 1.34 9.4 .370 max. 2 max .079 26 26 1.02 1.02 max. 2 34 34 max .079 1.34 1.34 53 53 2.09 2.09 max. 2 max. 2 34 max .079 34 max .079 1.34 1.34 Thermal Overcurrent Circuit Breaker 127-... Internal connection diagram Accessories Mounting sockets 1 10F-P10 (up to 16 A max. load) 1 8 2 .315 blade terminals DIN 46244-A6.3-0.8 (QC .250) 10F-K10 (up to 20 A max. load) wire cross sectional areas 2 2 x max. 2.5 mm (AWG14) stranded Typical time/current characteristics at +23°C/+73.4°F 2 2 x max. 4 mm (AWG12) solid 1 1 12 30 .039 1.18 .039 .472 10000 0.05 - 2.7 A 6 2.8 - 23 A .236 75 25 A 15 7 7.5 1000 .591 .296 .276 13 45 1.77 .512 75 2.95 10F-A10 (up to 16 A max. load) 100 blade terminals DIN 46244-A6.3-0.8 (QC .250) 8 .315 10 7 .276 1 wire cross sectional areas 2 2 x max. 2.5 mm (AWG14) stranded 2 2 x max. 4 mm (AWG12) solid Accessories for sockets (up to 20 A max. load) 2-way bus bar Y 301 166 02 4-way bus bar Y 301 166 01 0.1 12 46810 20 40 7.9 ... times rated current .311 4.2 .165 The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also 15 15 15 15 section 9 – Technical information. thickness = 0.8 mm .591 .591 .591 .591 .031 in. Ambient temperature °F -4 +14 +32 +73.4 +104 +122 +140 22.9 52.9 °C -20 -10 0 +23 +40 +50 +60 .902 2.08 Derating factor 0.76 0.84 0.92 1 1.08 1.16 1.24 Connector bus links -K10 2 X 210 589 01/ 2.5 mm (AWG 14), black (up to 20 A max. load) 2 X 210 589 02/ 1.5 mm (AWG 16), brown (up to 13 A max. load) ø2.5 .099 50 pin lugs to DIN 46230 tinned copper Connector bus links -P10 2 X 210 588 01/ 1.5 mm (AWG 16), brown (up to 13 A max. load) 2 X 210 588 02/ 2.5 mm (AWG 14), black (up to 20 A max. load) 2 X 210 588 03/ 2.5 mm (AWG 14), red (up to 20 A max. load) 2 X 210 588 04/ 2.5 mm (AWG 14), blue (up to 20 A max. load) 100 quick-connect tabs 6.3 (.250) DIN 46247 tinned brass, insulated All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.Product markings may not be exactly as the ordering codes. mm This is a metric design and millimeter dimensions take precedence ( ) Errors and omissions excepted. inch 06/07 www.e-t-a.com 1 - 21 Trip time in seconds 12.5 ~70 ~70 50 .492 ~2.76 ~2.76 1.97 9.5 59 68 .374 5.6 2.32 2.68 .220 11 12 11 12 11 12 2.9 .114 21 22 21 22 22 21 8.5 .335 12 .472

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products