1410-G110-P2F1-B04-1A - E-T-A - Electronics Finder

Description

Circuit Breaker Thermal 1Pole 1A 240VAC/28VDC
1410-G110-P2F1-B04-1A

Part Number

1410-G110-P2F1-B04-1A

Price

Request Quote

Manufacturer

E-T-A

Lead Time

Request Quote

Category

Circuit Protection » Circuit Breaker

Specifications

Manufacturer

E-T-A

Manufacturers Part #

1410-G110-P2F1-B04-1A

Sub-Category

Circuit Breakers

Factory Pack Quantity

Datasheet

D_1410-L2-G1_e_060206.pdf

92 KiB

Download

Extracted Text

Thermal Overcurrent Circuit Breaker 1410-L2/G1 Description Single pole press-to-reset thermal circuit breaker with extremely fast overload switching performance (R-type TO CBE to EN 60934). Single hole threadneck, PCB or integral mounting with a choice of designs. Miniaturised construction minimises PCB real estate required. Type 1410-L2 and 1410-G1 versions feature changeover contacts suitable for providing status output signals. Largely temperature-insensitive. 1 Typical applications Motors, transformers, solenoids, PCBs, hand-held machines, appliances, instrumentation. 1410-L2... 1410-G1... Ordering information Technical data Type No. For further details please see chapter: Technical Information 1410 single pole circuit breaker Voltage rating AC 240 V; DC 28 V Configuration (UL: AC 250 V; DC 50 V) L PCB mounting or integral mounting Current rating range 1-2 0.63...10 A G threadneck panel mounting or PCB mounting Mounting Auxiliary circuit 1-3 0.2 x I max. 1 A, AC 250 V N 1 threadneck 3/8-27UNS-2A (1410-G) Typical life 2 PCB 10.15x7.62 (1410-L) AC 240 V: 0.63...2.25 A 500 operations at 2 x I , inductive N 3 PCB 10.15without shunt terminal (1410-L) 2.5...10 A 500 operations at 2 x I , resistive N Number of poles DC 50 V: 0.63...2.25 A 500 operations at 2 x I , inductive N 1 1-pole, thermally protected DC 28 V: 2.5...10 A 500 operations at 2 x I , inductive N Hardware Ambient temperature -20...+100 °C (-4...+212 °F) 0 without 1 with hexnut and knurled nut (only1410-G) Insulation co-ordination rated impulse pollution > 5 pcs hexnut and knurled nut bulk shipped (IEC 60664 and 60664 A) withstand voltage degree 2 without hexnut and knurled nut and without shunt 2.5 kV 2 terminal (only 1410-G) reinforced insulation in operating area 4 with hexnut and knurled nut, Dielectric strength without shunt terminal (only 1410-G) (IEC 60664 and 60664A) test voltage 8 with actuator guard and marking CB.. operating area AC 1,500 V (only 1410-G) Insulation resistance > 100 MΩ (DC 500 V) Terminal design L2 solder pins 1x0.8 silver-plated Interrupting capacity I 0.63...2 A 12 x I cn N P2 blade terminals DIN 46244-A2.8-0.8 silver-plated (only -G) (o-o-o) 2.5...8 A 8 x I , AC max. 50 A N P3 blade terminals DIN 46244-A4.8-0.5 silver-plated (only -G) 10 A 6 x I , AC N Characteristic curve 3.15...10 A 10 x I , DC N F1 fast acting Interrupting capacity 0.63...10 A 2,000 A AC 250 V Actuator (UL 1077) 0.63...10 A 200 A DC 50 V B flat reset-slide (only 1410-G) Degree of protection operating area IP40 S reset slide/button (IEC 60529/DIN 40050) terminal area IP00 Actuator colour 01 black (for -G1..) Vibration 8 g (57-500 Hz) ±0.61 mm (10-57 Hz), 02 white (for -L2..) to IEC 60068-2-6, test Fc, 04 red (for 1410-G..-...B) 10 frequency cycles/axis Current ratings Shock 20 g (11 ms) 0.63...10 A to IEC 60068-2-27, test Ea Corrosion 48 hours at 5 % salt mist, 1410 - L 2 1 0 - L2 F1 - S 02 - 0.8 A ordering example to IEC 60068-2-11, test Ka Humidity 96 hours at 95 % RH *mounting hardware bulk shipped to IEC 60068-2-3, test Ca Mass approx. 5 g Standard current ratings and typical internal resistance values Current Internal Current Internal rating (A) resistance (Ω) rating (A) resistance (Ω) 0.63 1.8 3.15 < 0.12 Approvals 0.8 1.7 4 < 0.1 1 1.3 5 < 0.1 Authority Voltage rating Current ratings 1.5 < 1 6.3 < 0.1 VDE AC 240 V 0.63...10 A 1.8 < 1 8 < 0.1 DC 50 V 0.63...2 A 2 < 1 10 < 0.1 DC 28 V 2.5...10 A 2.5 < 0.15 UL, CSA AC 250 V; DC 50 V 0.63...10 A 06/07 www.e-t-a.com 1 - 49 Thermal Overcurrent Circuit Breaker 1410-L2/G1 Dimensions Internal connection diagram 1410-L210-L2F1-S02 32 33 1.30 30 1.18 28 9 1.10 .354 1 32 1 1 1 0.8 .039 .031 6.4 10.15 .252 Typical time/current characteristics at +23°C/+73.4°F mounting holes .400 7.6 .299 32 1 6.4±0.2 10000 +0.1 ±.008 10.15 .252 - 0.2 +.004 7.6 ±0.1 .400 - .008 ±.004 .299 1410-G111-P2F1-S01 1000 tightening torque max. 0.8 Nm 3/8-27UNS-2A ø7 100 .276 10 32 1 2.8 0.8 9 .110 .031 1 .354 10.15 6.4 blade terminal .252 .400 7.6 DIN 46244-A2.8-0.8 (QC .110) .299 mounting hole 28 0.1 1.10 15.7 .618 0.01 12 46810 20 40 ø9.6 - 0.1 … times rated current SW14 .378 - .004 .551 13 .512 ø4.6 1410-G114-P3F1-B04-... Installation drawings ø4.6 3/8-27UNS-2A ø.181 1410-L2.. Installation behind a cover which can only be removed by means of a tool 2 9 28 .354 1.10 blade terminals DIN 46244-A4.8-0.5 ø15,7 ø.618 mounting hole 13 +0 .512 ø9.6 -0.1 1410-G... +0 operating area wall ø.378 -.004 1410-G118-L2F1-B04-... ø11 ø.433 1 0.8 9 mounting area .039 .020 28 .354 1.10 ø15.7 ø.618 mm This is a metric design and millimeter dimensions take precedence ( ) inch All dimensions without tolerances are for reference only. In the interest of improved design, 13 performance and cost effectiveness the right to make changes in these specifications .512 without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 1 - 50 www.e-t-a.com 06/07 ~20° 11.3 1.2 9.6 .445 .047 .378 11 8 0.8 7 .433 3.3 1.2 11.3 .315 .031 12.5 .276 11 .047 .445 8.8 0.7 3.5 .130 1.4 .492 11 .433 0.7 3.3 .346 .028 .138 .055 1.2 8.8 .433 .028 .130 0.7 .047 .346 .028 14.7 14.2 .579 7.5 8.9 7 .559 .350 .276 .295 1.2 11 .047 .433 8.9 - 0.1 3 .350 - .004 .118 I x 45° 3 +0 ø8.9 -0.1 3 .118 +0 .118 ø.350 -.004 3.5 .138 Trip time in seconds

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products