2-6200-L10-H-SI-3A - E-T-A - Electronics Finder

Description

Circuit Breaker Thermal 1Pole 3A 250VAC/28VDC
2-6200-L10-H-SI-3A

Part Number

2-6200-L10-H-SI-3A

Price

Request Quote

Manufacturer

E-T-A

Lead Time

Request Quote

Category

Circuit Protection » Circuit Breaker

Specifications

Manufacturer

E-T-A

Manufacturers Part #

2-6200-L10-H-SI-3A

Sub-Category

Circuit Breakers

Factory Pack Quantity

Datasheet

D_2-6200_2-6400_e_060206.pdf

125 KiB

Download

Extracted Text

Thermal Overcurrent Circuit Breakers 2-6200/2-6400-... Description Single pole thermal circuit breakers with push-to-reset, tease-free, trip- free, snap action mechanism (R type TO CBE to EN 60934; M-type when fitted with manual release features/type 2-6200 only). Featuring auxiliary contacts (1 x N/C; 1 x N/O) as standard. Options include manual release (type 2-6200 only), an additional unprotected circuit tap (-A3) and a centre reset position in which all contacts are open (-ZR: type 2-6200-H only). Approved to CBE standard EN 60934 (IEC 60934). 1 Typical applications Motors, transformers, solenoids, controls for oil and gas boilers. 2-6200-... 2-6400-... Ordering information Technical data Type No. For further details please see chapter: Technical Information 2-6200 flange mounting, with auxiliary contacts Voltage rating AC 250 V; DC 28 V 2-6400 threadneck panel mounting, with auxiliary contacts Current rating range 0.05...16 A mounting hardware bulk shipped Mounting (type 2-6400 only) Auxiliary circuit 1 A, AC 250 V/DC 28 V iG1 moulded threadneck 3/8-27UNS-2A Typical life AC 250 V / DC 28 V: iG2 moulded threadneck M12 x 1 0.05...16 A 5,000 operations at 2 x I , inductive N Terminal design - main circuit Ambient temperature -20...+60 °C (-4...+140 °F) L10 solder terminals P10 blade terminals A6.3-0.8 mm (QC .250) Insulation co-ordination rated impulse pollution Shunt terminal (optional) (IEC 60664 and 60664A) withstand voltage degree A3 shunt terminal same as main terminal (up to 7/5 A 2.5 kV 2 max. load; up to 16 A/10 A max. load) reinforced insulation in operating area Manual release (optional) Dielectric strength H manual release facility (type 2-6200 only) (IEC 60664 and 60664A) test voltage Intermediate position (optional) operating area AC 3,000 V ZR intermediate position (type 2-6200-H only) main circuit Auxiliary contacts (standard) to aux. circuit AC 1,500 V Si N/O and N/C contacts, solder terminals aux. circuit 4-5 to 6-7 AC 840 V Current ratings Insulation resistance > 100 MΩ (DC 500 V) 0.05...16 A Interrupting capacity I 10 x I cn N 2-6200 - .. - P10 - .. - .. - .. - Si -8 A ordering example Interrupting capacity (UL 1077) I U N N The exact part number required can be built up from the table of choices shown 0.05...4.5 A AC 250 V 200 A above. Ordering references for optional features should be omitted if not required. 5...7 A AC 250 V 1,000 A 8...15 A AC 250 V 2,000 A 16 A AC 250 V 3,500 A Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Vibration 10 g (57-500 Hz) ±0.76 mm (10-57 Hz), to IEC 60068-2-6, test Fc, 10 frequency cycles/axis Standard current ratings and typical internal resistance values Shock 40 g (11 ms) to IEC 60068-2-27, test Ea Current Internal Current Internal Corrosion 96 hours at 5 % salt mist, rating (A) resistance (Ω) rating (A) resistance (Ω) to IEC 60068-2-11, test Ka 0.05 257 2 0.30 Humidity 240 hours at 95 % RH to IEC 60068-2-3, test Ca 0.08 138 2.5 0.20 Mass approx. 25 g 0.1 90 3 0.12 0.2 32.2 3,5 0.10 0.3 14.6 4 0.07 0.4 8.4 4.5 0.056 0.5 5.15 5 0.046 0.6 3.82 6 0.035 0.7 2.80 7 0.03 0.8 2.15 8 < 0.02 Approvals 1 1.42 10 < 0.02 1.2 0.96 12 < 0.02 Authority Voltage ratings Current ratings 1.5 0.51 15 < 0.02 VDE (EN 60934) AC 250 V; DC 28 V 0.05...16 A 1.8 0.40 16 < 0.02 CSA/ UL AC 250 V; DC 28 V 0.05...16 A 06/07 www.e-t-a.com 1 - 97 Thermal Overcurrent Circuit Breakers 2-6200/2-6400-... Internal connection diagrams Dimensions 2-6200-... 0.05 ... 7 A 8 ... 16 A 157 157 31 1.22 ø8.5 16.5 .650 .335 (3) (2) 46 46 1 2 3 (-A3) (-A3) 2-6200-...-ZR (Z) (Z) (Z) 157 157 157 0 I 0 I 0 I (3) (3) (3) 46 46 46 -P10 0.05 - 7A 11.5 2 2 2 50 .453 blade terminal 1.97 OFF position intermediate position ON position DIN 46244-A6.3-0.8 40 (QC .250) 1.57 5 21 current rating in A .197 .827 Typical time/current characteristics at +23°C/+73.4°F 5 10000 2-6400-... 3 iG1= / -27UNS-2A tightening torque max. 1 Nm 8 1000 tightening torque max. 1.5 Nm iG2=M12x1 iG1=8.8 (moulded ø6.4 iG2=11.3 threadneck) .252 iG1=.346 iG2=.445 100 10 14.5 .571 1 -P10 11.5 0.05 - 7A .453 blade terminal 0.1 31 DIN 46244-A6.3-0.8 12 46810 20 40 (QC .250) 1.22 mounting hole … times rated current 16.5 .650 The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit 5 breaker current ratings by the derating factor shown below. See also section 9 – Technical information. SW14 Ambient temperature °F -4 +14 +32 +73.4 +104 +122 +140 iG1=ø9.6 -0.1 °C -20 -10 0 +23 +40 +50 +60 .551 iG2=ø12.2-0.1 current rating in A Derating factor 0.76 0.84 0.92 1 1.08 1.16 1.24 iG1=.378 -.004 iG2=.480 -.004 mm This is a metric design and millimeter dimensions take precedence ( ) inch 1 - 98 www.e-t-a.com 06/07 Trip time in seconds 7 .276 3 .118 7 5 .197 .276 7 10.5 .413 .276 ø3.5 11 39 12.5 ON 11 46 16.5 ON .138 .433 1.54 .492 OFF .433 1.81 .650 18.5 22.5 OFF .728 .886 iG1=8.9 -0.1 iG2=11.5 -0.1 iG1=.350 -.004 iG2=.453 -.004 Thermal Overcurrent Circuit Breakers 2-6200/2-6400-... Installation drawings Terminal design 2-6200-... -P10 0.05…7 A See dimension diagram. operating area -P10 8…16 A 1 1.5 .059 -P10-A3 0.05…16 A 4 4 mounting area .157 .157 -L10 0.05…7 A 2-6400-... operating area 7 .276 -L10 8…16 A 1.5 .059 4 4 mounting area -L10-A3 0.05…16 A .157 .157 mm This is a metric design and millimeter dimensions take precedence ( ) inch 06/07 www.e-t-a.com 1 - 99 42.5 38 1.50 1.50 22.5 18 .886 .709 43.5 39 1.71 1.54 5 .197 Thermal Overcurrent Circuit Breakers 2-6200/2-6400-... Accessories for type 2-6400-... With 3/8" threadneck (-iG1) Water splash cover, transparent Y 300 538 01 and knurled nut Y 300 628 01 X 200 799 01 (IP64) 1 3 / -27 UNS-2B 8 Water splash cover, Hex nut with splash transparent with cover black without O ring special knurled nut X 210 739 01 (IP64) X 200 798 02 (IP64) transparent splash cover X 201 296 03 (IP64) 3 3 / -27 UNS-2B / -27 UNS-2B 8 8 Separate hardware Hex nut Knurled nut Y 300 192 01 Y 307 117 02 3/8-27 UNS-2B 3/8-27 UNS-2B ø15 SW14 2.5 3 .098 .591 .551 .118 With M12 threadneck (-iG2) Hex nut with splash cover, black Water splash cover, X 201 296 01 without O ring (IP64) transparent with knurled nut X 200 801 03 with O ring (IP66) and O ring Hex nut with splash cover, X 210 663 01 (IP64) transparent X 200 801 08 with O ring (IP66) M12x1 M12x1 Hex nut Knurled nut Y 300 116 02 Y 302 065 01 M12x1 M12x1 3.2 .126 2.5 SW14 ø17 0.5 x 45° .551 .098 .020 x 45° .669 mm This is a metric design and millimeter dimensions take precedence ( ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 1 - 100 www.e-t-a.com 06/07

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products