Thermal Overcurrent Circuit Breaker 3130 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting. Available either with protection on one/both/all poles or, in the case of the double pole version, protection on one pole only. Illumination is optional and there is a choice of rocker colours. Approved to CBE standard EN 60934 (IEC 60934). 1 Typical applications Motors, transformers, solenoids, household and office machines, electrical tools, mobile homes, boating, construction vehicles, medical equipment 3130 to EN 60601. 1-pole 3-pole Standard current ratings and typical internal resistance values Technical data Current Internal resistance Current Internal resistance For further details please see chapter: Technical Information rating (A) per pole (Ω) rating (A) per pole (Ω) Voltage rating AC 240 V; 3 AC 415 V; DC 50 V 0.1 94 4 0.0435 (UL: AC 250 V; 3 AC 250 V; DC 50 V) 0.2 24 5 0.0325 Current ratings 0.1...20 A 1-pole 0.1...16 A 2- and 3-pole 0.3 12 6 0.0215 Typical life 1-pole 0.4 5.30 7 0.0165 AC 240 V: 0.1...20 A 30,000 operations at 1 x I , inductive N 0.5 4.20 8 0.0165 DC 50 V: 0.1...4 A 30,000 operations at 1 x I , inductive N 0.8 1.50 10 < 0.02 4.5...16 A 30,000 operations at 1 x I , resistive N DC 28 V: 4.5...20 A 30,000 operations at 1 x I , inductive 1 0.9 12 < 0.02 N 2-pole 1.2 0.80 14 < 0.02 AC 240 V: 0.1...16 A 50,000 operations at 1 x I , inductive N 1.5 0.45 15 < 0.02 DC 50 V: 0.1...16 A 50,000 operations at 1 x I , inductive N 3-pole 2 0.27 16 < 0.02 3 AC 415 V: 0.1...16 A 30,000 operations at 1 x I , inductive N 2.5 0.0785 18 < 0.02 Ambient temperature -30...+60 °C (-22...+140 °F) 3 0.0595 20 < 0.02 Insulation co-ordination rated impulse pollution 3.5 0.0565 (IEC 60664 and 60664 A) withstand voltage degree 2.5 kV 2 reinforced insulation in operating area Dielectric strength Illumination voltage/power consumption (IEC 60664 and 60664A) test voltage operating area AC 3,000 V operating voltage power consumption current path/current path AC 1,500 V filament/neon (B) LED (G, R, Y) Insulation resistance > 100 MΩ (DC 500 V) 6 V 60 mA 9 mA Interrupting capacity I 0.1...2 A 10 x I cn N 12 V 20 mA 9 mA 2.5...20 A 150 A 1-pole 2.5...16 A 250 A 2-pole 24 V 20 mA 9 mA 2.5...12 A 150 A 3-pole 48 V 20 mA 1.5 mA 14 + 16 A 130 A 3-pole 115 V < 1.5 mA < 1 mA* Interrupting capacity I 0.1...12 A 14...16 A N 230 V < 1.5 mA < 1 mA* (UL 1077) 1- + 2-pole AC 250V/3500A AC 250V/3500A 3-pole 3AC 250V/5000A 415 V < 1 mA not available 1- + 2-pole DC 50V/2000A DC 50V/2000A * single pole version only Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Vibration 5 g (57-500 Hz), ±0.38 mm (10-57 Hz) Approvals to IEC 60068-2-6, test Fc 10 frequency cycles/axis Authority Voltage rating Current rating Shock 1-pole: 25 g (11 ms) 2 + 3-pole: 20 g (11 ms) VDE (EN 60934) AC 240/415 V 0.1...20 A single pole to IEC 60068-2-27, test Ea 0.1...16 A multipole Corrosion 96 hours at 5 % salt mist, DC 50 V 0.1...8 A single pole to IEC 60068-2-11, test Ka 0.1...16 A multipole Humidity 240 hours at 95 % RH, DC 28 V 0.1...20 A single pole to IEC 60068-2-3, test Ca UL, CSA AC 250 V; DC 50 V 0.1...16 A 1- and 2- pole Mass approx. 45 g (three pole) 3 AC 250 V 0.1...12 A 3-pole approx. 31 g (double pole) approx. 17 g (single pole) All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 06/07 www.e-t-a.com 1 - 75 Thermal Overcurrent Circuit Breaker 3130 Ordering information - 1-pole Ordering information - multipole Type No. Type No. 3130 rocker switch/circuit breaker 3130 rocker switch/circuit breaker multipole Mounting Mounting F snap in frame F snap in frame Frame Frame 1 standard 1 standard 3 special single pole version Number of poles Number of poles 2 2-pole, thermally protected 1 1 single pole, thermally protected 3 3-pole, thermally protected A 1-pole, unprotected** 5 2-pole, thermally protected on one pole only Frame mounting 6 3-pole, thermally protected on two poles only 0 panel thickness 1-2.5 mm (.039-.099 in) (only 3130-F1..-...) B 2-pole, unprotected** 1 panel thickness 1.5-3.2 mm (.059-.126 in)(only 3130-F3.1-...) C 3-pole, unprotected** Terminal design Frame mounting P7 blade terminals DIN 46244-C-Ms-S (QC 2x.110) 0 panel thickness 1-2.5 mm (.039-.099 in) (only 3130-F1..-...) H7 for terminals 1.1, 2.1 3.1 terminal screws M 3.5 Terminal design for terminals 1.2, 2.2, 3.1 blade terminals (QC 2x.110) P7 blade terminals DIN 46244-C-Ms-S (QC 2x.110) N7 blade terminals (QC 2x.110), with shunt terminal H7 for terminals 1.1, 2.1 3.1 terminal screws M 3.5; Characteristic curve for terminals 1.2, 2.2, 3.1 blade terminals T1 thermal, 1.05-1.4 I (QC 2x.110) N Q1 switch, only with terminal design -N7 N7 blade terminals DIN 46244-C-Ms-S (QC 2x.110), Switch style with shunt terminal W rocker Characteristic curve U momentary switch function T1 thermal, 1.05-1.4 I N Switch colour designation Q1 switch, only with terminal design -N7 opaque translucent Switch style 01 black 12 white W rocker 02 white 14 red U momentary switch function 04 red 19 green Switch colour designation 09 green 29 black, rocker with green dot opaque translucent Rocker markings 01 black 12 white A dot (ON position, only with switch 02 white 14 red colour designation 29) 04 red 19 green Q "I" and "O" moulded in 09 green Rocker illumination (optional) Rocker markings .12Q Y white rocker, yellow LED, AC/DC Q "I" and "O" moulded in . 14 Q R red rocker, red LED, AC/DC Rocker illumination (optional) . 19 Q Y green rocker, yellow LED, AC/DC B filament (≤ AC/DC 48 V), . 29 A G black rocker with dot, green LED neon (≥ AC 115 V) Illumination voltage range* G green LED, DC (optional) R red LED, DC 1 4 - 7 V (G,R,Y) Y yellow LED, DC 2 10 - 14 V (G,R,Y) Illumination voltage range* 3 20 - 28 V (G,R,Y) (optional) 4 42 - 54 V (R,Y) 1 4 - 7 V (B,G,R,Y) 6 90 - 140 V (R,Y) 2 10 - 14 V (B,G,R,Y) 7 185 - 275 V (R,Y) 3 20 - 28 V (B,G,R,Y X LED, DC 8 - 10 mA *** 4 42 - 54 V (B,R,Y Current ratings 6 90 - 140 V (B) 0.1...20 A 7 185 - 275 V (B) 8 320 - 450 V (B) 3130 - F 1 1 0 - P7 T1 - W 12 Q Y 7 - 5 A ordering example Current ratings 0.1...16 A * N/A for non-illuminated version ** unprotected poles have to ordered with terminal design N7 3130 - F 1 3 0 - P7 T1 - W 12 Q B 7 - 5 A ordering example *** without series resistor and diode, to be selected by customer. Recommendation: * N/A for non-illuminated version 4-7 V Rv 0.43 kΩ ** unprotected poles have to ordered with terminal design N7 10-14 V Rv 1.1 kΩ 20-28 V RV 2.7 kΩ diode 1N4007 1 - 76 www.e-t-a.com 06/07 R3 .118 R1.5 .059 R3 .118 R3 .118 Thermal Overcurrent Circuit Breaker 3130 Dimensions 3130-F110-… 3130-F130-… 37.5 14.5 1.48 .571 OFF ON 32.5 OFF ON 9.5 1.28 .374 terminal for illumination conductor size 2 0.14 mm (AWG26), length 180 mm 1 (7.09 in.) LINE LINE I.3 I.2 I.I I.3 I.2 I.I 3 2 I unit 2 2 blade terminals DIN 46244-C-Ms-S blade terminals DIN 46244-C-Ms-S .079 .079 (QC 2x.110 P7 or N7) (QC 2x.110 P7 or N7) 20 20 .787 .787 Side view Side view 34 34 1.34 1.34 switch only LINE LINE I.I I.I flat head screw M3.5x5 -MS ISO 1580 (H7) Panel cut-out flat head screw M3.5x5 -MS ISO 1580 (H7) -0.4 tightening torque max. 0.8 Nm tightening torque max. 0.8 Nm min. 1.5 Panel cut-out -0.2 -.016 min .059 -0.4 min. 1.5 -.008 -0.2 -.016 min .059 ±0.1 -.008 ±.004 ±0.1 panel thickness ±.004 +0.2 1-2.5 mm 34 panel thickness (.039-.098 in.) +.008 1.34 +0.2 36 1-2.5 mm 34 1.42 (.039-.098 in.) +.008 1.34 +0.3 +.012 illuminated dot (-.29AG.-) +0.3 36 +.012 1.42 optional illumination Edges of working parts: DIN 6784 3130-F120-… 26 3130-F311-… 17.8 1.02 OFF ON 21 .701 OFF ON 9.5 .827 .374 terminal for illumination conductor size 2 0.14 mm (AWG26), length 180 mm (7.09 in.) LINE LINE I.3 I.2 I.I I.3 I.2 I.I 2 unit I 2 2 blade terminals DIN 46244-C-Ms-S blade terminals DIN 46244-C-Ms-S .079 .079 (QC 2x.110 P7 or N7) (QC 2x.110 P7 or N7) 20 20 .787 .787 Side view Side view 34 34 1.34 1.34 LINE LINE I.I I.I flat head screw M3.5x5 -MS ISO 1580 (H7) flat head screw M3.5x5 -MS ISO 1580 (H7) tightening torque max. 0.8 Nm tightening torque max. 0.8 Nm Panel cut-out Panel cut-out optional illumination min. 1.5 -0.4 min. 1.5 -0.2 min .059 min .059 -.016 -.008 ±0.1 ±0.1 ±.004 ±.004 panel thickness +0.2 1-2.5 mm 34 39.5 B (.039-.098 in.) +.008 1.56 1.34 36 A B +0.3 +0.3 1.42 mm inch mm inch +.012 +.012 +0.15 +.006 optional illumination 1.50 .059 35 1.38 +0.15 +.006 2.35 .093 36 1.42 +0.15 +.006 3.20 .126 37 1.46 Edges of working parts: DIN 6784 Edges of working parts: DIN 6784 mm This is a metric design and millimeter dimensions take precedence ( ) inch 06/07 www.e-t-a.com 1 - 77 < R0.5 < .020 < R0.5 < .020 < R0.5 < .020 < R0.5 < .020 5.85 5.85 .230 .230 10 33 2 10 33 2 18 29.5 1.30 .079 1.30 .079 .394 .394 1.16 .709 +0.2 +0.2 26.1 14.6 +.008 +.008 1.03 .575 5.85 5.85 .230 .230 10 33 2 10 33 2 19.5 41 .079 .079 .394 1.30 .394 1.30 .768 1.61 A +0.2 +0.2 18 37.6 +.008 +.008 .709 1.48 Thermal Overcurrent Circuit Breaker 3130 Installation drawing 3130-F1... Internal connection diagrams 1-pole 1-pole switch When installing the circuit breaker apply pressure on bezel only. line I.I line I.I operating area 1 LINE I.3 I.2 I.I I.3 lamp I.2 lamp load load 2-pole 1-pole momentary switch line I.I 2.I line I.I 5 7 7 8 .315 .197 .276 .276 20 mounting area .787 I.2 2.2 I.3 lamp load load load Typical time/current characteristics 3-pole 2-pole momentary switch line I.I 2.I line I.I 2.I 3.I Multipole types: all poles symmetrically loaded. With single pole overload, thermal tripping will be at approx. 1.54 x I N with 2-pole devices and at approx. 1.68 x I with 3-pole devices. N 0.1 2 A +60 ¡C 10000 +140 ¡F I.3 2.3 +23 ¡C load load +73.4 ¡F I.2 3.2 2.2 -30 ¡C 1000 load load load -22 ¡F Accessories 3130-F130-... 100 Splash cover, transparent, for 3-pole version X 221 258 01 (IP54), comprising bezel Y 306 109 01 10 and transparent cover Y 306 108 01 1 0.1 12 46810 20 40 36.5 times rated current 1.44 2.5 20 A 1-pole 50 2.5 16 A 2- and 3-pole 1.97 +60 ¡C 10000 +140 ¡F +23 ¡C +73.4 ¡F -30 ¡C 1000 -22 ¡F 100 50 10 1.97 mm This is a metric design and millimeter dimensions take precedence ( ) inch 1 The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 – Technical information. 0.1 12 46810 20 40 Ambient temperature °F -22 -4 +14 +32 +73.4 +104 +122 +140 times rated current °C -30 -20 -10 0 +23 +40 +50 +60 Derating factor 0.8 0.76 0.84 0.92 1 1.08 1.16 1.24 1 - 78 www.e-t-a.com 06/07 32 10 1.26 .394 Trip time in seconds Trip time in seconds 25 .984 ø8 .315 ø4.4 5 41.5 .173 .197 1.63 ø11 12 .433 .472 55 2.17 Thermal Overcurrent Circuit Breaker 3130 Description Single pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting. Available either with protection on one/both/all poles or, in the case of the double pole version, protection on one pole only. Illumination is optional and there is a choice of rocker colours. Approved to CBE standard EN 60934 (IEC 60934). 1 Typical applications Motors, transformers, solenoids, household and office machines, electrical tools, mobile homes, boating, construction vehicles, medical 3130 equipment to EN 60601. water splash protected (IP 66) Standard current ratings and typical internal resistance values Technical data Current Internal resistance Current Internal resistance For further details please see chapter: Technical Information rating (A) per pole (Ω) rating (A) per pole (Ω) Voltage rating AC 240 V; DC 50 V 0.1 94 4 0.0435 (UL: AC 250 V; DC 50 V) 0.2 24 5 0.0325 Current ratings 0.1...20 A 0.3 12 6 0.0215 Typical life AC 240 V: 0.1...20 A 30,000 operations at 1 x I , inductive 0.4 5.30 7 0.0165 N DC 50 V: 0.1...4 A 30,000 operations at 1 x I , inductive N 0.5 4.20 8 0.0165 4.5...16 A 30,000 operations at 1 x I , resistive N 0.8 1.50 10 < 0.02 DC 28 V: 4.5...20 A 30,000 operations at 1 x I , inductive N 1 0.9 12 < 0.02 Ambient temperature -30...+60 °C (-22...+140 °F) 1.2 0.80 14 < 0.02 Insulation co-ordination rated impulse pollution (IEC 60664 and 60664 A) withstand voltage degree 1.5 0.45 15 < 0.02 2.5 kV 2 2 0.27 16 < 0.02 reinforced insulation in operating area 2.5 0.0785 18 < 0.02 Dielectric strength 3 0.0595 20 < 0.02 (IEC 60664 and 60664A) test voltage operating area AC 3,000 V 3.5 0.0565 current path/current path AC 1,500 V Insulation resistance > 100 MΩ (DC 500 V) Interrupting capacity I 0.1...2 A 10 x I cn N 2.5...20 A 150 A Illumination voltage/power consumption Interrupting capacity 0.1...12 A 14...16 A operating voltage power consumption (UL 1077) AC 250V/3,500A AC 250V/3,500A DC 50V/2,000A DC 50V/2,000A filament/neon (B) LED (G, R, Y) Degree of protection operating area IP66 6 V 60 mA 9 mA (IEC 60529/DIN 40050) terminal area IP00 12 V 20 mA 9 mA Vibration 5 g (57-500 Hz), ±0.38 mm (10-57 Hz) 24 V 20 mA 9 mA to IEC 60068-2-6, test Fc 48 V 20 mA 1.5 mA 10 frequency cycles/axis 115 V < 1.5 mA < 1 mA Shock 25 g (11 ms) to IEC 60068-2-27, test Ea 230 V < 1.5 mA < 1 mA Corrosion 96 hours at 5 % salt mist, 415 V < 1 mA not available to IEC 60068-2-11, test Ka Humidity 240 hours at 95 % RH, to IEC 60068-2-3, test Ca Mass approx. 17 g Approvals Authority Voltage rating Current rating VDE (EN 60934) AC 240/415 V 0.1...20 A DC 50 V 0.1...8 A DC 28 V 0.1...20 A UL, CSA AC 250 V, DC 50 V 0.1...16 A 06/07 www.e-t-a.com 1 - 79 Thermal Overcurrent Circuit Breaker 3130 Ordering information - IP66 Dimensions 3130-F212-... Type No. 3130 rocker switch/circuit breaker OFF ON Mounting terminal for F snap in frame illumination Frame flying lead conductor size 2 splash water protected 2 0.14 mm , Number of poles length 180 mm (7.09 in.) 1 single pole, thermally protected GERMANY 1 A 1-pole, unprotected ** LINE I.3 I.2 I.I Frame mounting 2 panel thickness 2-3.5 mm Terminal design 2 P7 blade terminals DIN 46244-C-Ms-S (QC 2x.110) blade terminals DIN 46244-C-Ms-S .079 (QC 2x .110 P7 or N7) 20 H7 for terminals 1.1 terminal screws M 3.5 .787 for terminals 1.2 2 x .110 blade terminals 34 N7 blade terminals DIN 46244-C-Ms-S (QC 2x.110), 1.34 Side view with shunt terminal or for switch only Characteristic curve LINE T1 thermal, 1.05-1.4 I N I.I Q1 switch, only with terminal design -N7 Switch style S 00 without actuator rocker X 222 420 .. flat head screw M3.5x5 -MS ISO 1580 (H7) must be ordered separately. tightening torque max. 0.8 Nm Available symbols see following pages. S rocker Panel cut-out P momentary switch -0.4 -0.2 sharp edged min. 1.5 Switch colour designation (not S00) -.016 min .059 -.008 opaque translucent ±0.1 01 black 12 white ±.004 02 white 14 red panel thickness 44 2 - 3.5 mm 04 red 19 green +0.2 1.73 (.079-.138 in.) 38 09 green +.008 illuminated trip indication (optional) 1.50 Switch markings 0 without actuator Q "I" and "O" moulded in Switch illumination .12Q Y white rocker, yellow LED, AC/DC . 14 Q R red rocker, red LED, AC/DC Edges of working parts: DIN 6784 . 19 Q Y green rocker, yellow LED, AC/DC S00 0 Y without rocker, LED yellow, AC/DC Illumination voltage range* Installation drawing 3130-F212-... 1 4 - 7 V (R,Y) 2 10 - 14 V (R,Y) 3 20 - 28 V (R,Y) 4 42 - 54 V (R,Y) operating area 6 90 - 140 V (R,Y) 7 185 - 275 V (R,Y) X LED, DC 8-10 mA *** Current ratings 0.1...20 A LINE I.3 I.2 I.I 3130 F 2 1 2 - P7 T1 - S 12 Q Y 7 - 5 A ordering example * N/A for non-illuminated version ** unprotected poles have to ordered with terminal design N7 *** without series resistor and diode, to be selected by customer. Recommendation: 4-7 V Rv 0,43 kΩ 10-14 V Rv 1,1 kΩ 20-28 V RV 2,7 kΩ 8 5 7 7 .315 .197 diode 1N4007 .276 .276 20 mounting area .787 mm This is a metric design and millimeter dimensions take precedence ( ) inch 1 - 80 www.e-t-a.com 06/07 < R0.5 < .020 R1 .039 14.3 .563 32 10 .394 1.26 28 10 1.7 22.5 .394 1.10 .067 .886 +0.2 16.6 25 +.008 .654 .984 Thermal Overcurrent Circuit Breaker 3130 Internal connection diagrams Typical time/current characteristics 1-pole 0.1 … 2 A line I.I 10000 +60 °C +140 °F +23 °C +73.4 °F -30 °C 1000 -22 °F 1 I.2 lamp load 100 1-pole switch 1-pole momentary switch line I.I line I.I 10 1 I.3 lamp I.3 lamp load load 0.1 12 46810 20 40 … times rated current 2.5 … 20 A 10000 +60 °C +140 °F +23 °C +73.4 °F -30 °C 1000 -22 °F 100 10 1 0.1 12 46810 20 40 … times rated current The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 – Technical information. Ambient temperature °F -22 -4 +14 +32 +73.4 +104 +122 +140 °C -30 -20 -10 0 +23 +40 +50 +60 Derating factor 0.8 0.76 0.84 0.92 1 1.08 1.16 1.24 mm This is a metric design and millimeter dimensions take precedence ( ) inch 06/07 www.e-t-a.com 1 - 81 Trip time in seconds Trip time in seconds Thermal Overcurrent Circuit Breaker 3130 Accessories Rocker How to exchange rockers Symbols/legends available X 222 420 .. NAV Navigation instruments X 222 420 14 Music X 222 420 15 Heating X 222 420 16 1 symbol Caution! X 222 420 12 Use care not to damage the seal. Shower pump X 222 420 17 GERMANY LINE X 222 420 18 I.3 I.2 I.I Icebox X 222 420 19 Ice Symbols/legends available Water for windshield wiper X 222 420 20 Interior light X 222 420 01 Weigh anchor X 222 420 21 UP Anchor light X 222 420 02 Drop anchor X 222 420 22 DOWN Cockpit light X 222 420 03 Search light X 222 420 23 Navigation light X 222 420 04 Autopilot X 222 420 24 AUTO VHF radio X 222 420 05 Trim flaps X 222 420 25 Refrigerator X 222 420 06 Mast lift X 222 420 26 Anchor X 222 420 07 Navigation lights X 222 420 27 (sailing ship) Windshield wiper X 222 420 08 Cockpit light X 222 420 28 (sailing ship) Bilge pump X 222 420 09 Deck light X 222 420 29 (sailing ship) Potable water X 222 420 10 Anchor light X 222 420 30 (sailing ship) Horn X 222 420 11 Further symbols upon request. Ventilation fan X 222 420 12 Panel light S00 switch style: X 222 420 13 white translucent rocker coated with black lacquer with laser marked symbols that appear in white translucent. Blanking piece (black) 3130-387012 ON OFF GERMANY LINE I.3 I.2 I.I 34 Panel cut-out 1.34 -0.4 -0.2 sharp edged min. 1.5 -.016 min .059 -.008 ±0.1 ±.004 panel thickness 2 - 3.5 mm +0.2 (.079-.138 in.) 38 44 +.008 1.50 1.73 mm This is a metric design and millimeter dimensions take precedence ( ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications Edges of working parts: DIN 6784 without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 1 - 82 www.e-t-a.com 06/07 < R0.5 < .020 14.3 .563 28 1.7 22.5 1.10 .067 .886 +0.2 16.6 +.008 .654