Thermal-Magnetic Circuit Breakers 3600/3900 Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Designed for plug-in mounting with E-T-A sockets 17-P10-Si, 23-P10-Si, 63-P10-Si; or panel mounting using E-T-A clips. Featuring an unprotected shunt tap terminal and optional auxiliary contacts. Type 3900 offers lower internal resistance values and is fitted as standard with auxiliary contacts and an intermediate reset position in which all contacts are isolated. Approved to CBE standard EN 60934 (IEC 60934). Typical applications 1 3600 3900 Process control systems, instrumentation, communications systems, standard type low-resistance type rail vehicles. Technical data Ordering information For further details please see chapter: Technical Information Type No. Voltage rating AC 240 V, 50/60 Hz; DC 65 V 3600 standard version with shunt tap terminal -3 (UL: AC 250 V; DC 65 V) 3900 low-resistance version Current rating range 3600: 0.05...16 A Terminal design 3900: 0.05...10 A P10 blade terminals 6.3-0.8 (QC .250) Auxiliary contacts (3900: intermediate position as standard) Auxiliary circuit 1 A, AC 240 V / DC 65 V Si with blade terminals 6.3-08,one each NO/NC, min. 10 V/10 mA Current ratings Typical life 5,000 operations at 1 x I , inductive N 0.05...16 A (type 3600) 5,000 operations at 2 x I , resistive N 0.05...10 A (type 3900) Ambient temperature -30...+60 °C (-22...+140 °F) 3600 - P10 - Si - 10 A ordering example Insulation co-ordination rated impulse pollution (IEC 60664 and 60664 A) withstand voltage degree The exact part number required can be built up from the table of choices shown 2.5 kV 2 above. Ordering references for optional features should be omitted if not required. reinforced insulation in operating area Dielectric strength (IEC 60664 and 60664A) test voltage Preferred types operating area AC 3,000 V main/aux. circuit AC 1,500 V Preferred types Standard current ratings (A) aux. circuit 4-5/6-7 AC 840 V Insulation resistance >100 MΩ (DC 500 V) 0.5 1 2 4 8 10 16 x x x x x x x Interrupting capacity I 3600 3900 3600-P10-Si- cn 0.05...0.8 A 0.05...0.2 A self-limiting x x x x 3900-P10-Si- 1...2 A 0.3...2 A 200 A 2.5...16 A 2.5...10 A 400 A Interrupting capacity I U N N Standard current ratings and typical internal resistance values (UL 1077) 0.05...16 A AC 250 V 1,000 A type 3600: 0.05...16 A DC 80 V 1,000 A Current Current Internal resistance Internal resistance Degree of protection operating area IP40 ratings ratings (Ω) (Ω) (IEC 60529/DIN 40050) terminal area IP00 (A) (A) Vibration 5 g (57-500 Hz), ± 0.38 mm (10-57 Hz) 3600 3900 3600 3900 to IEC 60068-2-6, test Fc 0.05 447 211 3 0.19 0.054 10 frequency cycles/axis 0.1 131 48 4 0.090 0.035 Shock 25 g (11 ms) to IEC 60068-2-27, test Ea 0.2 40 12.4 5 0.061 0.025 Corrosion 96 hours at 5 % salt mist to IEC 60068-2-11, test Ka 0.3 19.3 5.4 6 0.041 ≤ 0.02 0.4 10.4 3.1 7 0.034 ≤ 0.02 Humidity 240 hours at 95 % RH to IEC 60068-2-78, test Cab 0.5 7.1 2.0 8 ≤ 0.02 ≤ 0.02 Mass approx. 45 g 0.6 4.3 1.32 10 ≤ 0.02 ≤ 0.02 0.8 2.5 0.76 12 ≤ 0.02 1 1.67 0.49 14 ≤ 0.02 1.5 0.61 0.21 15 ≤ 0.02 2 0.38 0.101 16 ≤ 0.02 2.5 0.24 0.078 1719 www.e-t-a.de 1 Thermal-Magnetic Circuit Breakers 3600/3900 Dimensions Internal connection diagrams ø11.5 -P10-Si with shunt terminal (standard) .453 ø8.5 ø6.5 and auxiliary contacts (-Si) only 3600 .256 .335 line 1 line 1 5 7 ø4 .157 3 3 4 6 I > I > 3 (from I =8 A) 3 (from I =8 A) N N 2 2 14 63 75 2 1 Installation drawing 6.8 .268 blade terminals 6 x 6.8 = 40.8 DIN 46244-A6.3-0.8 (QC .250) 6 x .268 = 1.61 operating area (reinforced insulation) 43 current rating in A 1.69 13 20 .512 .787 50 1.97 Terminal design -P10 14 63 75 2 12 3 12.5 mounting area .492 Typical time/current characteristics 1) 1) 2) 3600 0.05…7 A AC 3600 8…16 A AC 3900 0.05…10 A DC 10000 10000 10000 1000 1000 1000 100 100 100 10 10 10 1 1 1 0.1 0.1 0.1 0.01 0.01 0.01 0.001 0.001 0.001 12 46 8102040 60 80100 12 46 8102040 60 80100 12 46 8102040 60 80100 … times rated current … times rated current … times rated current +60 °C +23 °C -30 °C The time/current characteristic curve depends on the ambient temperature +140 °F +73.4 °F -22 °F prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also 1) Magnetic tripping currents are increased by 20 % on DC supplies. section Technical information. 2) Magnetic tripping currents are decreased by 20 % on AC supplies. -22 -4 +14 +32 +73.4 +104 +122 +140 Ambient temp. °F -30 -20 -10 0 +23 +40 +50 +60 °C 0.76 0.79 0.83 0.88 1 1.08 1.16 1.24 Derating factor mm This is a metric design and millimeter dimensions take precedence ( ) inch 2 www.e-t-a.de 1719 Trip time in seconds 11 OFF .433 5 ON .197 10 51 8.5 .335 .394 2.01 2 19 2 11.5 .748 .079 .453 Trip time in seconds Trip time in seconds 20 2 .079 .787 38 1.50 Thermal-Magnetic Circuit Breakers 3600/3900 Thermal-Magnetic Circuit Breakers 3600/3900 Accessories Sockets Power-D-Box with sockets pre-wired 19BGT2 2U 17-P10-Si 17-P10-Si-20025 for 18, 24 or 30 circuits. (up to 16 A max. load) mounted with adapter For technical data see product group Power Distribution Retaining clip Y 300 581 11 to special order. Systems. polarized blade terminal slot fitting labels from DIN 46244-A6.3-0.8 (QC .250) -P10 Phoenix, Weidmüller retaining clip 6.3 depth .248 10 mm 10 (.394 in.) .394 1 2(k) 2(k) 1 1 12 12 11 11 24 24 23 23 2(i) 2(i) 80 12.5 3.15 .492 symmetrical rail EN 50022-35x7.5 G-profile EN 50035-G32 polarization recess adapter X20040901 Module 17plus For technical data see section Power Distribution Systems Sockets 17-P70-Si 17-P70-Si-20025 slot for fitting labels from Phoenix, Weidmüller, Wieland (up to 16 A max. load) mounted with adapter Retaining clip Y 300 581 11 to special order. blade terminal DIN 46244 part 2 slot fitting labels from C profile (2xA2.8-0.8) (QC 2x.110) -P70 Phoenix, Weidmüller retaining clip 2.8 depth .110 10 mm 10 (.394 in.) .394 2(k) 2(k) 1 1 12 12 11 11 17 plus 24 24 23 23 2(i) 2(i) 80 12.5 3.15 .492 G-profile 6 25 25 symmetrical rail 63 EN 50022-35x7.5 EN 50035-G32 G-profile 115 max. 38 polarization recess adapter X20040901 EN 50035-G32 symmetrical rail EN 50022-35x7,5 slot for busbar Sockets 23-P10-Si 63-P10-Si right-side terminal block (up to 16 A max. load) Retaining clip Y 300 581 03 to special order. test socket polarized blade terminals left-side terminal block retaining DIN 46244-A6.3-0.8 (QC .250) 22.2 clip module .874 7.4 7.4 21 .291 .291 .827 6.25 4.4 12.5 10 .173 .492 .246 .394 Approvals Authority Standard Voltage ratings Current ratings 12.5 3600: 50 2 .492 1.97 .079 12.5 4.4 6 25 VDE AC 240 V 0.05...16 A IEC/EN 60934 .984 .492 .173 .236 DC 65 V 0.05...16 A polarized 75 max. 30 recess 2.95 max. 1.18 UL AC 250 V 0.05...16 A C22.2 No. 235 DC 80 V 0.05...16 A CSA UL 1077 AC 250 V 0.05...16 A DC 80 V 0.05...16 A 3900: VDE AC 240 V 0.05...10 A IEC/EN 60934 DC 65 V 0.05...10 A 1719 www.e-t-a.de 3 47 42,5 51 11,5 1.1 1.2 Line Line 11 11 14 14 2.1 2.2 12.1 12.2 57 64 25.8 25.8 6.5 8.5 6.5 8.5 50 57.4 64 33.3 33.3 1.4 1.4 5 10 5 10 50 57.4 41.3 41.3 6 x 6.8 = 40.8 3.5 6 x .268 = 1.61 6.8 45.8 45.8 2.52 .256 1.02 .335 .256 1.02 .335 1.97 2.26 2.52 1.31 1.31 .055 .055 .197 .197 .394 .394 1.97 2.26 1.63 1.63 .138 .268 1.80 1.80 Thermal-Magnetic Circuit Breakers 3600/3900 Accessories Bus bar (10-way) (supplied as a complete package) for socket 17 (for max. 100 A continuous load ) X 211 157 01 with terminal X 211 157 02 without terminal (more positions available on request) Phoenix terminal AKG 35 cylinder head screw washer 2 max.cross section 35 mm (AWG 2) M4x4 ISO1207 A 4.3 DIN 125 nickel plated nickel plated female 1 connector M4 Cu rail, tin-plated 7 12.8 .276 pressure-relief joint .504 (1.1 mm (.043 in.) 154.8 thick constriction) 6.09 Insulate sleeving for bus bar Y 303 824 01 9 .354 5.4 125 .213 4.92 Connector bus links -P10 2 X 210 588 01/ 1.5 mm (AWG 16), brown up to 13 A max. load 2 X 210 588 02/ 2.5 mm (AWG 14), black up to 20 A max. load 2 X 210 588 03/ 2.5 mm (AWG 14), red up to 20 A max. load 2 X 210 588 04/ 2.5 mm (AWG 14), blue up to 20 A max. load 100 quick-connect tabs 6.3 (.250) DIN 46247 tinned brass, insulated Extraction tool Y 301 398 02 56 2.21 Mounting clip Installation drawing with Y 300 504 02 mounting clips Y 300 504 02 (2 pcs needed per unit) 1 .039 0.5 .020 8.5 12.5 .335 .492 60.4 7.3 2.38 .287 50 1.97 mm This is a metric design and millimeter dimensions take precedence ( ) inch M4 16.5 20 All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications .650 .787 without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 4 www.e-t-a.de 1719 17 46 ~70 8 .669 1.9 1.81 ~2.76 .315 .075 7.5 2 .079 .295 2 .079 10 .394 2 .079