E-T-A 583-G411-K1M1-A1S0TN-2A

High Performance Thermal Circuit Breaker 583-... Description Three pole, miniaturised, aircraft style thermal circuit breaker with tease-free, trip-free, snap action mechanism and push/pull on/off manual actuation (M-type TO CBE to EN 60934). An indicator band on the push button clearly shows the tripped/off position. Threadneck panel mounted, available in metric and US (AS 14154) configurations. Advanced two-chamber design minimises contact contamination to provide fail-safe operation. Temperature compensated with optional auxiliary contacts, and fully approved for use on a wide range of aircraft and equipment. Various dummies are available without protective function, allowing connection of pre-installed wiring without loads. 1 583-... without auxiliary contact with auxiliary contact Typical applications Aircraft systems and equipment (fixed wing and helicopters); other extra low voltage wiring applications; defence equipment; communications Technical data systems. Voltage rating 3 AC 200 V (300 Hz to 800 Hz); DC 28 V Current rating range 1...30 A Standard current ratings and typical volt drop values Auxiliary circuit 0.5 A, DC 28 V Typical life 20,000 operations mechanical Current Volt drop per Current Volt drop per 10,000 operations at I (≤ 25 A) N rating (A) pole (mV) rating (A) pole (mV) 4,000 operations at I (30 A) N 1 750 7.5 230 Ambient temperature -55...+125 °C (-67...+257 °F) ≤ 15 A -55...+90 °C (-67...+194 °F) > 15 A 2 520 10 190 Insulation co-ordination rated impulse pollution 2.5 400 15 190 (IEC 60664 and 60664A) withstand voltage degree 1.5 kV 3 3 360 20 200 Dielectric strength 4 350 25 170 (IEC 60664 and 60664A) test voltage operating area AC 1,500 V 5 260 30 160 pole/pole AC 1,500 V main to aux. circuit AC 1,500 V Insulation resistance > 100 MΩ (DC 500 V) Approvals Interrupting capacity I cn 3 AC 200 V (400 Hz): ≤ 4 A 1,000 A 5 A 2,000 A Authority Standard Voltage ratings Current 7.5...25 A 2,500 A ratings 30 A 1,500 A Bw VG AC 115/200 V, 400 Hz 1 A…25 A DC 28 V: 1...25 A 6,000 A 95345, DC 28 V 1 A…25 A 30 A 4,000 A part 11 Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Bw LN 29887 AC 115/200 V, 400 Hz 5 A…25 A Vibration 10 g (57-2000 Hz), ± 0.76 mm (5-57 Hz) Dep. of the Navy AS14154 AC 115/200 V, 400 Hz 1 A…20 A (sinusoidal) to VG 95210, sheet 19, IEC 60068-2-6, test Fc, ISO 7137 QPL Canada VG AC 115/200 V, 400 Hz 1 A…25 A 2 Dep. of National 95345, DC 28 V 1 A…25 A Vibration (random) 16.4 g rms, 0.2 g Hz ± 1.5 dB, Defence part 11 to VG 95210, sheet 29, IEC 60068-2-6, test Fc, ISO 7137 QPL Sweden LN 29887 AC 115/200 V, 400 Hz 1 A…25 A Acceleration 17 g, to ISO 2669 Defence Material MS 14154 DC 28 V 1 A…25 A Admin. Shock 50 g (11 ms), to VG 95210, sheet 28, IEC 60068-2-27, test Ea, ISO 7137 QPL UK LN 29887 AC 115/200 V, 400 Hz 5 A…25 A Corrosion 96 hours at 5 % salt mist Ministery of 48 hours at 20 % salt mist Defence to VG 95210, sheet 2, Airbus EN AC 115/200 V, 400 Hz 1 A…25 A IEC 60068-2-11, test Ka, ISO 7137 2996-004 Humidity 240 hours at 95 % RH, to VG 95210, sheet 7, Airbus EN AC 115/200 V, 400 Hz 1 A…25 A IEC 60068-2-3, test C/ISO 7137 2996-005 Explosion to VG 95210, sheet 10, MIL-STD-202, meth. 109 Altitude ≤ 25,000 m above sea level Mass max. 67 g with auxiliary contact max. 63 g without auxiliary contact Mass reduction through aluminium threadneck approx. 3 g 1646 www.e-t-a.de 1 max. 1.5 max. .059 max. 1.5 max. .059 45° 45° High Performance Thermal Circuit Breaker 583-... Dimensions 583-G411-K1M1-A1S0TN (VG 95345 T11) Ordering information Type No. 583 three pole, with temperature compensation Mounting tightening torque max. 4 Nm M12x1 G threadneck panel mounting ø10 Threadneck design ø8.4 .394 1 M12x1x6.4x8.8 dia. with mounting plate (aux. contact version) .331 black 3 MJ12x1x6.4x8.8 dia. (only without aux. contact) white 4 M12x1x6.4x8.8 dia. (only without aux. contact) lock washer 5 7/16-32UNx6.4x7.8 (only without aux. contact) 7 7/16-32 UNx6.4x7.8 dia. with mounting plate (aux.contact version) 8 M12x1x6.4xø8.8 with mounting plate, aluminium threadneck C1 B1 A1 9 M12x1x6.4xø8.8, aluminium threadneck Hardware for threadneck (washers) 1 0 without hardware 8.5 2.5 .335 .098 1 corrugated washer 12/15, fitted terminals: 12.8 5 2 serrated lock washer 12.1/17.2, fitted A1, B1, C1 - input .197 .504 A2, B2, C2 - output 3 toothed washer 11.3/14.9, fitted 15 15 25.5 .591 .591 5 serrated lock washer 12.1/17.2, bulk shipped 1.00 teminal screw ISO 7045-M4x6 Hardware for threadneck (nuts) with lock washer DIN 137 B4 0 without hardware tightening torque max. 1.2 Nm mounting holes 1 hex nut M12x1 +0.15 max. 19.8 ø3.2 3 hex nut 7/16-32UN +.006 .126 max .780 current rating in A 5 hex nut MJ12x1 (only with threadneck design 3) min. 50 7 hex nut M12x1, aluminium, bulk shipped min. 1.97 Terminal design (main terminals) K screw terminals with metric thread 1 K14 (M4, MJ4) J screw terminals with inch thread +0.2 1 J14 (8-32UNC-2B) ø12.5 +.008 .492 Characteristic curve 0.8 M1 thermal, 1.15-1.38 I .031 N location pin 9.5 Terminal screws .374 A Phillips screw M4x6 B Phillips screw 8-32UNC-2Ax6 (MS 51957-41) thickness 1.5 - 3 mm .059 - .118 in. K hex screw with Phillips head 8-32UNC-3Ax7.6 L Phillips screw MJ4x6 Z without accessories Terminal washers Dimensions 583-G533-J1M1-B2S0XN (AS14154) 0 without lock washer 1 lock washer B4 2 lock washer 4.3 (MS 35338-137) 5 lock washer 4.3/9 tightening torque max. 3 Nm Auxiliary contact 7/16-32-UN-2A THD S0 without auxiliary contact ø10 ø8.4 S1 with auxiliary contact (N/C) (connector .394 .331 to EN 3155-016M2018, size 20) black white S5 with polarized auxiliary contact (N/C) lock washer Barrier T barrier 25.5 mm wide, 37.7 mm long (-S0 only) C1 B1 A1 U barrier 19.5 mm wide, 37.7 mm long X barrier 19.5 mm wide, 34.1 mm long Colour of the push button 8.5 2.5 (blank) black (standard) (e.g. 7.5) .335 .098 G green to EN (e.g. 7 1/2) 12.8 terminals: 5 A1, B1, C1 - input N black to EN (e.g. 7 1/2) .504 .197 A2, B2, C2 - output 15 15 Current ratings .591 .591 teminal screw MS 51957-41 (8-32 UNC-2A) 1...30 A with lock washer MS 35338-137 tightening torque max. 1.2 Nm mounting holes 583 - G 4 1 1 - K 1 M1 - A 1 S0 T . - 5 A ordering example +0.15 max. 19.8 ø3.2 +.006 max .780 .126 current rating in A min. 50 min. 1.97 Ordering information for approved devices 583-G411-K1M1-A1S0TN (583-96-TC-K14) Metric threadneck M12x1 and terminal design -K14 (M4x6), listed +0.2 ø11.5 by the German Materialamt der Bundeswehr to VG 95345 T11. +.008 .453 0.8 .031 583-G533-J1M1-B2S0XN (AS 14154) 9.5 Threadneck size 7/16-32UNSx6.4 and terminal design -J14 (inch .374 location pin thread 8-32), approved to AS 14154. thickness 1.5 - 3 mm .059 - .118 in. mm This is a metric design and millimeter dimensions take precedence ( ) inch 2 www.e-t-a.de 1646 45° 45° min. .181 min. .181 min. 4.6 min. 4.6 max. 46.7 max. 47 6.35 6.35 max. 1.84 max. 1.85 .250 .250 2 2 1.5 1.5 .079 .079 .059 .059 5 5 31 6.5 ON min. 11.9 ON max. 31 SW14 SW14 .256 1.22 min .469 max. 1.22 .551 12.5 OFF .551 36.5 max. 35.1 max. 19 OFF 1.44 .492 min. 30 min. 30 max. 1.38 max .748 38 min. 1.18 min. 1.18 1.50 3.5 min. 3 .138 min .118 ±0.2 ±0.2 9.5 9.5 ±.008 ±.008 .374 .374 5 max. 1.5 max. .059 45° High Performance Thermal Circuit Breaker 583-... High Performance Thermal Circuit Breaker 583-... Dimensions 583-G111-K1M1-A1S1UN (VG 95345 T11) Typical time/current characteristics tightening torque max. 4 Nm 10000 +90 °C M12x1 +194 °F ø10 ø8.4 + 23 °C .394 1000 .331 + 73.4 °F black -55 °C white -67 °F lock washer 100 10 A2 B2 C2 1 1 8.5 2.5 .335 .098 12.8 terminals: 5 0.1 A1, B1, C1 - input .504 .197 A2, B2, C2 - output 15 15 .591 .591 teminal screw ISO 7045-M4x6 0.01 with lock washer DIN 137 B4 tightening torque max. 1.2 Nm mounting holes +0.15 ø3.2 max. 6.5 19.5 0.001 current rating in A +.006 .126 12 46 810 20 40 6080100 max .256 .768 min. 50 … times rated current min. 1.97 +0.2 ø12.5 +.008 .492 9.5 .374 location pin aux. contact thickness 1.5 - 3 mm (connector to EN 3155-016 M2018) .059 - .118 in. Internal connection diagrams with auxiliary contact EN 2996-004 line A2 B2 C2 line A1 B1 C1 3 A2 B2 C2 4 A1 B1 C1 with auxiliary contact with polarized auxiliay contact VG 95345 T11 EN 2996-005 line A1 B1 C1 11 line A1 B1 C1 3 A2 B2 C2 5 A2 B2 C2 12 1646 www.e-t-a.de 3 45° 22° 45 1.77 14.2 16.2 12.5 OFF .492 .559 .638 max. 10.5 6.5 ON max .413 .256 1.5 SW14 31 .059 1.22 .551 38 6.35 1.50 .250 min. 30 min. 1.18 3.5 .138 ±0.2 9.5 ±.008 .374 Trip time in seconds High Performance Thermal Circuit Breaker 583-... Accessories Splash cover/hex nut assembly with O ring (IP66 and IP67) (approved to VG 95345, part 23) X 200 801 08 nickel plated nut, transparent cover X 200 801 03 matt black finish nut, black cover X 200 801 09 matt black finish nut 7/16-32, black cover X 200 801 12 with blackened nut and transparent cover 1 M12x1 or 7/16-32 Splash cover black/hex nut assembly with O ring (IP54) only for threadneck nut M12 (to VG 95345, sheet 23) X 200 802 01 nickel plated nut X 200 802 02 matt black finish nut M12x1 Actuator extension (black) to be fitted on the push button (approved to VG 95345, T23) X 200 803 01 ø20 ø.787 Identification collar to be snapped on the push button Y 307 004 01 black Y 307 004 02 white Y 307 004 03 red Y 307 004 04 green ø14 Y 307 004 05 blue .551 ø6.85 .270 ø12.35 .486 0.65 .026 Lock out ring to block the push button in OFF position Y 307 005 01 red Y 307 005 02 black ø14.6 .575 ø10.9 .429 mm This is a metric design and millimeter dimensions take precedence ( ) inch 0.8 All dimensions without tolerances are for reference only. In the interest of improved design, .031 performance and cost effectiveness the right to make changes in these specifications without notice is reserved. Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 4 www.e-t-a.de 1646 1.8 6.4 .071 .252 7.7 17 .303 .669