E-T-A E-1048-8D5-C0A0-4U3-10A

Smart Power Relay E-1048-8D... Description The Smart Power Relay E-1048-8D is a remotely controllable electronic load disconnecting relay with two functions in a single unit: l electronic relay l electronic overcurrent protection The 4 pin DICE version is designed for use with standard automotive relay sockets. A choice of current ratings is available from 1 A through 30 A. An operating voltage range of DC 9...32 V allows the connection of DC 12 V and DC 24 V loads. In order to switch and protect loads remotely, it has until now been necessary to connect several discreet components together: - an electro-mechanic relay, control cable and integral contact to close the load circuit - an additional protective element (circuit breaker or fuse) for E-1048-8D DICE version cable or equipment protection Now type E-1048-8D combines these two functions in a single Technical Data (T = 25 °C at U ) unit, thus minimising the number of connections in the circuit A N and thereby reducing the risk of failures. Power supply LINE + Type DC power supply with small R i Applications battery and generator etc. Voltage ratings U DC 12 V/DC 24 V N Type E-1048-8D is suited to all applications with DC 12 V or DC 24 V Operating voltage U DC 9...32 V S circuits, where magnetic valves, motors or lamp loads have to be Closed-circuit current switched and protected: 1) I in the OFF condition 50 µA 0 - road vehicles (utility vehicles, buses, special vehicles) Load circuit LOAD - construction and agricultural machinery Load output Power MOSFET, High Side Switch - rail vehicles (HSS) - marine industry (ships, boats, yachts etc.) Current rating range I 1 A ... 30 A (fixed ratings) without load N The Power Relay is also suitable for industrial use (process control, reduction up to 85° C (1 A ... 25 A), machine-building, engineering) as an electronic coupling relay between 30 A up to 60 °C ambient temp. PLC and DC 12 V or DC 24 V load Types of loads resistive, inductive, capacitive, lamp loads, motors (depending on duration of inrush current) Features ENTRY version Load output with short circuit protection ENTRYprotect version Load output with short circuit and l Integral power electronics provide a wear-resistant switching overload protection (typically 200 ms function, insensitive to shock, vibration and dust. at I typically 1.3 x I ) Load N l Compared to electro-mechanical relays, only a fraction of the I = 1 A...10 A: see trip curve 1 N closed-circuit current or switching current is needed. This is I = 15 A...30 A: see trip curve 2 N 1) important for battery buffered load circuits which have to remain Typical voltage drop U at rated current I ON N controlled even with the generator off line. I U I U N ON N ON l The extremely low induced current consumption of less than 50 µA is 1 A 50 mV 10 A 110 mV absolutely necessary for battery buffered applications. 5 2 A 55 mV 15 A 70 mV l The load circuit is disconnected in the event of a short circuit 3 A 60 mV 20 A 90 mV (ENTRY version) or overload/short circuit (ENTRYprotect version). l 5 A 80 mV 25 A 120 mV For switching and monitoring loads of 30 A plus it is possible to 7.5 A 90 mV 30 A 140 mV connect several units in parallel. Uniform power distribution between units must be ensured by symmetrical design of the supply cables only ENTRYprotect (length and cross section). 1) Switching point typically 1.3 x I l N Coloured label, for the identification the rated current (e. g. red = 10 A). (-40 °C...+85 °C: 1.1...1.5 x I ) N 1) Trip time (standard curve) typically 200 ms with switch-on onto overload and/or load increase on duty Approvals Max. overload I = 1 A...10 A: 60 A (at L/R = 3 ms) N I = 15 A...30 A: 200 A (at L/R = 3 ms) N Authority Approval mark Regulation Parallel connection of channels for loads of 30 A plus, several units of identical current ratings may be KBA E1 ECE R 10 connected in parallel. To ensure equal distribution of current between units, symmetrical design of the supply feed is necessary (length and cross section). 1) typically 1646 www.e-t-a.de 1 Smart Power Relay E-1048-8D... Technical Data (T = 25 °C at U ) Technical Data (T = 25 °C at U ) A N A N Free-wheeling diode integral Housing for connected load I = 1 A...10 A: max. 40 A N dimensions 30 x 30 x 30 mm when plugged in I = 15 A...30 A: max. 100 A N 30 x 30 x 41.6 mm including terminals 1) Delay time t 0.5 ms, t 1.5 ms on off Materials housing PA66-GF30 Short circuit, overload - disconnection of load base plate PA6-GF30 in load circuit - no automatic re-start Mass approx. 20 g (25 A and - after remedy of the fault unit has to 30 A approx. 50 g) be reset via control input IN+ Control input IN+ Ordering Information Control voltage IN+ 0...5 V = “OFF”, 8.5...32 V = “ON” Control current I typically 1 mA at 12 V / Type E typically 5 mA at 24 V E-1048-8D Smart Power Relay DC 12 V/24 V, 1 A...30 A Reset in the event of a failure - via external control signal in DICE version Housing / temperature range (low-high) at control input IN+ 4 with housing -40 °C...85 °C (for rated current up to 20 A) - via reset of supply voltage 5 with housing -40 °C ... 85 °C (60 °C at IN = 30 A) Control input IN- improved ambient req. (IP protection class etc.) Control input Control voltage IN- relay energised when IN- connected to C 0 with control input (IN+ control 8.5...32 V) ground; tolerance range 12 V system: C 1 with control input (IN- control by connecting to ground) 0...6 V = “ON” 8.5...12 V “OFF” C2 IN+ with increased control current (12.5 mA) tolerance range 24 V system: Options 0...18 V = “ON” 20.5...24 V “OFF” A0 without options Reset in the event of a failure - resettable via external control signal Characteristic curve (High-Low) at control input IN- 0 ENTRY, short circuit protected - via reset of supply voltage 4 ENTRYprotect, 200 ms standard switch-off delay with overload, short circuit Control input IN+ / IN- protected Switching frequency Voltage rating at resistive or inductive load max. 60 Hz U3 DC 12/24 V Current ratings / colour of label Edge of IN < 5 ms 1 A / black General data 2 A / grey 3 A / purple Reverse polarity protection 5 A / light-brown Control circuit yes 7.5 A / brown Load circuit no (due to integral free-wheeling diode) 10 A / red Temperature range 1 ...25 A: -40 ... +85 °C 15 A / blue ambient temperature 30 A: -40 ... + 60 °C without derating 20 A / yellow 25 A / white Temperature shutdown power transistor > 150 °C 30 A / green Tests Humid heat combined test, 9 cycles with E-1048-8D 4 - C 0 A0 - 0 U3 - 10 A ordering example: functional test ENTRY version 4 pin test to DIN EN 60068-2-30, Z/AD Temperature change min. temperature -40 °C, max. temperature +90 °C Dimensions DICE version (4 pin version) test to DIN IEC 60068-2-14, Nb 5 Vibration (random) in operation, with temperature change 6 g eff. (10 Hz...2,000 Hz) test to DIN EN 60068-2-64 2 2, 4, 6 and 8 - blade terminals 6.3 x 0.8 Vibration was tested with standard sockets for PCB mounting. 6 4 Behaviour at vibrations depends on 8 design, quality and age (number of footprint to ISO 7588 push-in cycles) of the socket particularly regarding duration of the vibration and the mounting position. Shock 25 g/11 ms, 10 shocks test to DIN EN 60068-2-27 Corrosion test to DIN EN 60068-2-52, severity 3 Protection class housing -8D4 IP30 to DIN 40050 housing -8D5 IP54 to DIN 40050, higher protection class upon request EMC requirements EMC directive: 30 emitted interference EN 50081-1 1.18 noise immunity EN 61000-6-2 Automotive directive: emitted interference, noise immunity: 72/245/EWG and 2006/28/EG Terminals 4 blade terminals 6.3 mm x 0.8 mm contact material CuZn37F44 Mounting: on automotive relay socket 4-pole 1) typically mm This is a metric design and millimeter dimensions take precedence ( ) inch 2 www.e-t-a.de 1646 30 30 1.18 1.18 41,6 1.64 Smart Power Relay E-1048-8D... Smart Power Relay E-1048-8D... Typical time/current characteristics (T = 25 °C) Connection diagrams DICE version A Trip curve 1 “ENTRYprotect” 1 A, 2 A, 3 A, 5 A, 7,5 A and 10 A (standard 200 ms) C0 Control Input IN+ 1000 LINE (+) + DC 12 V/24 V control input 100 IN+ 1…10 mA 10 1 LOAD (+) GND max. overload 0.1 0 1 2 I (A) (typically 60 A) typ. 1.3 x I N C1 (Control Input IN-) ... times rated current I N LINE (+) DC 12 V/24 V Trip curve 2 “ENTRYprotect” 15 A, 20 A, 25 and 30 A (standard 200 ms) 1000 control input IN- 1…10 mA 100 10 LOAD (+)GND 5 1 max. overload 0.1 Pin selection DICE version (4 pin) 0 1 2 (typically 200 A) I (A)) typ. 1.3 x I N E-1048-8D DICE version ...times rated current I N 1 (30) 2 LINE +U (DC 12 V/24 V) 2 S (30) 3 Preferred types (86) 4 6 4 IN control input (31) (86) 5 Preferred types Standard current ratings (A) (88a) 8 (31) 6 GND ground U S 1 2 3 5 7.5 10 15 20 (88a) 8 LOAD load output E-1048-8D4-C0A0-4U3- x x x x x x x x All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved. Product markings may not be exactly as the ordering codes. Errors and omissions excepted. 1646 www.e-t-a.de 3 Trip time in ms Trip time in ms 5 7 - 4 www.e-t-a.de 1646