EATON BUSSMANN 2778
Specifications
Manufacturer
Eaton Bussmann
Manufacturers Part #
2778
Industry Aliases
2778BS, 2778
Sub-Category
Fuse Accessories
Factory Pack Quantity
1
Datasheet
Extracted Text
BUSSMANN Effective December 2015 Technical Data 2021 Supersedes April 2014 SERIES KAZ and MIS 13⁄32˝ x 2˝ 600Vac KAZ actuator and MIS non time-delay pin indicating supplemental fuses Catalog symbol / color code: Dimensions - in (mm): • KAZ 2.0 ±0.031 0.25 Min. (Blown Position) (50.8±0.79) (6.35) 0.406 • 0.063 Black (600Vac max actuator - not a fuse) Max. (Unblown Position) (10.31) (1.60) • MIS • Black (600Vac max 1 to 12A) Description: Features: KAZ is a non-fuse actuator (not a fuse) for use KAZ (not a fuse) in parallel with a 50 amp or greater fuse to • Connects in parallel with fuses having a provide indication a fuse has opened by rating of 50 amps or more opening at 10 or more amps. The KAZ can also be applied in a 1-, 2- or 3-pole block with • Opens at 10A or more miniature signaling switches to provide remote • Use with Bussmann series signal blocks to status indication. actuate a miniature switch that closes a MIS fuses are non time-delay pin indicating signal circuit when the KAZ pin indicator supplemental fuses used to provide a visual ejects upon opening KAZ indication of an open fuse condition. • Gives a direct visual indication of an open Acutator Specification: fuse by the ejected, spring actuated pin • UL Listed as “fuse accessory” Ratings • Mounts in Bussman series signal blocks 2778 Interrutping rating Agency Fuse (1-pole), 2837 (2-pole) and 2838 (3-pole) at rated voltage information amp ® ® range 600Vac UL CSA MIS (non time-delay fuse) MIS 1 to 12 200kA – – • Gives a direct visual indication of an open KAZ* N/A 200kA X – fuse by the ejected, spring actuated pin * KAZ is not a fuse. • Can be used in circuits of 600Vac or less KAZ Agency information • 200kA Interrupting rating • CE Typical applications • UL Listed, Guide JDVS, File E58836 KAZ KAZ Catalog number (not a fuse) • Large shunt-trip fused switches KAZ • Fuse-protected circuits rated 50 amps or more with shunt-trip devices MIS Catalog numbers (amps) MIS Fuse MIS MIS-1 MIS-3 MIS-5 MIS-10 600Vac 1 to 12A MIS-2 MIS-4 MIS-8 MIS-12 • 480V Control circuits • PLC Circuits MIS Electrical characteristics Recommended fuse blocks / Fuse amps % of amp rating Opening time fuseclips: All 110% 4 kours minimum Catalog No. Description Data sheet No. 1-5A 150% 6 minutes max 2778 1-pole block (KAZ Only) * 6-12A 150% 12 minutes max 2837** 2-pole block (KAZ Only) * 2838** 3-pole block (KAZ Only) * 1A3400, 5956 PCB fuseclips 2132 and 5960 * See next page for details. **Includes fuseclips to hold spare KAZ. Technical Data 2047 KAZ and MIS Effective December 2015 600Vac Acutator (KAZ) and Non time-delay pin indicating supplemental fuses (MIS) Fuse block with miniature signaling switches for KAZ only Voltage • 600V Agency information • UL Recognized, Guide QEUY2, File E61918 Dimensions ± 1/31” (0.8mm) Inches/(mm’s) Mounting data Cat. No. Poles A B C Hole C’Bore Screw 1.75 2.5 2778 1 — 1.73 0.328 #8 (44.5) (63.5) 5.31 4.81 3 2837* 2 (134.9) (122.2) (76.2) 0.250 — #12 6.63 6.125 3 2838* 3 (168.3) (155.6) (76.2) * Includes fuseclips to hold spare KAZ. C 0.250" 3.75" (6.4) (95.3) B 0.36" (9.1) A 1.94" (49.2) The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Eaton 1000 Eaton Boulevard For Eaton’s Bussmann series Cleveland, OH 44122 product information, United States Eaton.com call 1-855-287-7626 or visit: Eaton.com/bussmannseries Bussmann Division Eaton, Bussmann and Low-Peak are 114 Old State Road valuable trademarks of Eaton in the US Ellisville, MO 63021 and other countries. You are not permitted United States to use the Eaton trademarks without prior Eaton.com/bussmannseries written consent of Eaton. © 2015 Eaton Follow us on social media to get the CSA is a registered trademark of the All Rights Reserved latest product and support information. Printed in USA Canadian Standards Group. Publication No. 2011 – BU-SB14290 UL is a registered trademark of the December 2015 Underwriters Laboratories, Inc.
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the 2778?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods