® Bussmann ® TRON In-Line Fuseholders HEX & HEY Double-Pole for Class CC and ��‰£“• ¯ 1�‰“• Fuses Series Catalog and Specification Data Conductor Terminals Conductor Data Catalog Terminal Type Size Symbol Copper Crimp #12 to #8 1 • • A HEX Series #12 2 • • (1) (2) Catalog Symbol: HEX-AA , HEX-AB, HEX-AC, HEX-AD, #10 2 • • #6 1 • • B HEX-AE, HEX-AY, HEX-BB, HEX-CC, HEX-JJ, HEX-JK, and #4 1 • • HEX-KK. #8 2 • • C In-Line Fuseholders, Double Pole #4 1 — • Water-Resistant #6 2 • • D For breakaway holders, see page 2 #2 1 — • #4 2 • • E Agency Information: Copper Set-Screw (1) UL Recognized, Guide IZLT2, File E14853 (2) CSA Certified, Class 6225-01, File 47235 #12 to #3 1 • • J HEX — For any ��‰£“• ¯ 1�‰“• fuse. Fuseholder rated 30A, 600V (CSA Listed 15A max.). Typical fuse types: BAF, FNM, FNQ, and KTK (�‰`… - 30A). #12 to #3 2 • • K Aluminum Set-Screw #12 to #2 1 • • L #12 to #2 2 • • Y HEY Series Catalog Symbol: HEY-AA, HEY-AB, Catalog Data — Insulating Boots HEY-AC, HEY-AD, HEY-AE, HEY-AL, HEY-BB, and HEY-JJ. Catalog Numbers Type In-Line Fuseholders, Double-Pole 2A0660 Single Conductor Water-Resistant 2A0661 Two Conductor For breakaway holders, see page 2 HEY — Optional breakaway receptacle, water-resistant, polarized, and accepting Class CC branch circuit fuses (Buss General Information: Type KTK-R, FNQ-R, & LP-CC; 600V or less, 200,000A inter- • Insulating boots are not included with non-breakaway rupting rating.) Particularly applicable in street lighting circuits. parts and must be ordered separately. They come standard Example: with the breakaway series. The HEX-AW does not have the A double-pole, in-line holder for Class CC fuses. A single #12 boots. This catalog item does not have a breakaway receptacle. stranded copper wire, copper crimp, on the load side. A sin- • When boots are utilized, extra heat retention requires that gle #4 stranded, copper wire, copper crimp on the line side. fuses are sized at a minimum of 200% of the RMS load Insulating boots are required. current. 1. Choose HEY- Series. 2. Choose “A” for load side. 3. Choose “C” for line side. Ordering Information: 4. Choose 2A0660 insulating boots from page 2. HEX Complete Catalog Number: HEY-AC, 2A0660; HEY 4 insulating boots required Load Line per holder Terminal Terminal Recommended Torque on Coupling Nut: 10-20 in-lb. Form No. HEX & HEY Series Page 1 of 2 7-16-03 N03082 Data Sheet: 2126 No. Per Terminal Solid Stranded ® Bussmann ® TRON In-Line Fuseholders HEX & HEY Double-Pole for Class CC and ��‰£“• ¯ 1�‰“• Fuses Series Catalog and Specification Data Breakaway Holders Breakaway Receptacles HEX Series Catalog Symbol: HEX-AW, Conductor Data Catalog HEX-AW-DRLC-A, HEX-AW-DRYC, and HEX-JW-DRYC. Size Symbol HEY Series Catalog Symbol: HEY-AW-DRLC-A, Terminal Type HEY-AW-DRYC, and HEY-AW-DRLC-B. *Double Pole In-Line Fuseholders, Double Pole Copper Crimp #12 to #8 1 • • -DRLC-A Example: #6 1 • • -DRLC-B A double-pole, in-line, breakaway holder for ��‰£“• ¯ 1�‰“• fuses, a single #12 solid copper wire, copper crimp, on the Copper Set-Screw load side. A single #10 stranded copper wire, copper crimp on the line side. Insulating boots are required. #12 to #3 1 • • -DRLC-J 1. Choose HEY- Series. 2. Choose “A” from 1st page for load side. 3. Choose “W” for breakaway requirement. #12 to #3 2 • • -DRYC 4. Choose “DRLC-A” for two-pole breakaway receptacle on line side. *Terminal illustration shows the end views of single-pole Complete Catalog Number: HEY-AW-DRLC-A receptacle and one pole only of the double pole recepta- cles. Thus, for example, in the case of a double-pole, Insulating boots come with this catalog number. set-screw type receptacle with terminals that accept two conductors, a total of four conductors could be connected to the receptacle. Ordering Information: HEX W HEY Load Line Terminal Terminal Recommended Torque on Coupling Nut: 10-20 in-lb. The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con- tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. HEX & HEY Series Page 2 of 2 7-16-03 Data Sheet: 2126 N03082 *No. Per Terminal Solid Stranded