Circuit Protection Solutions CAMASTER and SAFELOC BS88 Fuseholders Product Guide CAMASTER & SAFELOC BS88 Fuseholders product guide Safeloc HRC Fuseholder - 660V ac: 32A - 63A NNS, ENS Features & Benefits Specification Description: - Unique slide/snap action carrier which eliminates Fuseholder to use with BS88 Fuse links the need for fuse carrier contacts for bolted panel mounting or DIN rail. - Low power loss and increased reliability due to the design Dimensions: See Dimensions illustra- of the carrier that provides positive stress free fitting of fuse tions and locates position of the fuse. Ratings: - Protection against electrical shock. Base contacts are fully Volts: -550Vac, 415V (63A) shrouded Amps: -32, 63A - Easy and fast access to the contact terminal screw due to Agency information: CE, Compliance simple sliding retained shrouds to BS88, EN IEC 60269 and CSA - Flexible mounting: simple screw or DIN Rail C22.2. NO .106 standards Typical applications - Lighting equipment and circuit protection - Heating equipment and circuit protection - Motor protection Catalogue Part Numbers - Control equipment circuit protection Catalogue request Available Variants NNS ENS Front connected/Front 32NNSF 63ENSF connected Back Stud/Back/Stud 32NNSBS 63ENSBS Front connected/Back 32NNSFBS 63ENSFBS Stud Neutral Links 32NNL 63ENL Dimensions Dimensions (mm) Max Rec. Ratin Part Cable Fuse g (A) No 2 mm Link A B C D E F G H J K 32 NNS 16 NSD 25.4 80.3 48.5 2.3 16.0 39.2 57.7 17.0 9.7 M6 63 ENS 35 ESD 29.1 90.0 55.0 3.3 17.7 75.0 67.9 39.2 11.0 M8 For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp CAMASTER & SAFELOC BS88 Fuseholders product guide Camaster HRC Fuseholder - 660V ac: 20A-32A-63A-100A-200A*-400A* Features and Benefits CM -Easy to remove the carrier from the fuse base due to the cam Specification Description: Fully action system (*excluding 200A & 400A) shrouded fuse bases with unique cam - Enhanced electrical performance level due to special design action system for BS88 Fuse link of cam system that increase the pressure between fuse base applications and fuse carrier contact Dimensions: See Dimensions -Easy and fast connection; conversion capability, retro fit on illustrations site Ratings: -Safer maintenance operations thanks to lockable safety carri- Volts - 660 Vac ers Amps : 20, 32 (Compact)32, 63, and - Flexible mounting capability both DIN rail and panel bolted 100A without accesories Agency information: CE, Compliance to - Reduce downtime operations installing a neon clip-in indica- BS88, EN IEC 60269 tor, easy to identify operated fuse location * Please note that the 200A & 400A do not have the CAM action -Flexible use of multiple configurations needed due to the 2 or 3 poles ganging accessories Dimensions Accessory Rating (A) Catalogue No Carton Qty 32 32BSC 10 Dimensions (mm) Max Rec. Rating Back Stud 32 32BS 10 cable Cat. No Fuse (A) 63/100 63/100BS 5 2 Link mm A B C D E F G H J K Ganging Links GLP 1 set Neon Indicator 90-415V ac NI 3 20 CM20F 16 NITD 25.4 93.7 60 3.2 17.5 66.0 58.0 28.6 11.9 M6 32LSCC 3 Lockable Safety 32LSC 3 Carriers 32 CM32FC 16 NITD 25.4 93.7 60 3.2 17.5 66.0 58.0 28.6 11.9 M6 63/100LSC 3 32 32CMLC 32 CM32F 16 AAO 31.8 117.5 60 3.2 17.5 66.0 74.0 28.6 11.9 M6 Neutral Links 32 32CML 1 63/100 63/100CML 63 CM63F 70 BAO 35.6 125 60 4.75 16.4 86.5 81.0 28.6 11.9 M8 Security Clip CMSC 20 100 CM100F 70 OSD 35.6 125 60 4.75 16.4 86.5 81.0 28.6 11.9 M8 200 200DF 95 DD 70 193 149 17.5 35.6 8 138 30 24 M12 192.1 400 400EF 240 ED 98.4 254 31.8 36.5 - - - - - For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp CAMASTER & SAFELOC BS88 Fuseholders product guide SAFELOC HRC Fuseholder - 660V: 32A-63A Features Benefits No need to acquire separate mounting DIN Rail and screw mounting as Cost Saving accessories standard Time Reduce installing time, no need to remove Sliding retained shrouds screws to access the fuse base terminal saving Increased Protection to electrical shock for Base contacts fully shrouded accidental touch of live parts safety Reduce power loss by perfect alignments of contacts and direct contacts between Superior Slide/snap action for fuse fuse tags and fuse holder contacts extractions performance No tools required to install or replace fuselinks SAFELOC Cross Reference Cooper Bussmann Bill GE Lawson 32NNSF V32FF SC32H LCF32FC/FCBK 32NNSFBS V32FB - LCF32FC/BCBK 32NNSBS - SC32P LCF32BC/BCBK 63ENSF V63FF SC63H LCF63FC/FCBK 63ENSFBS V63FB - LCF63FC/BCBK 63ENSBS - SC63P LCF63BC/BCBK Fusebanks Two ranges of fuse banks are available, utitlising the CAMASTER and SAFELOC fuseholders. The fuse banks consist of single phase assemblies of busbar connected fuseholders mounted on a back strap, for incorporation in distribution fuse boards to facilitate compliance with BS5486 parts 1&2. The banks are available in 4 to 12 ways (4 to 8 ways at 100A) and a compatible range of neutral bars and earth ter- minal busbars are also available. For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp CAMASTER & SAFELOC BS88 Fuseholders product guide SAFELOC IT’S EASY TO CHANGE! IT’S EASY TO... IT’S EASY TO... insert fuses into install on DIN carrier without rail or bolted on the use of tools panel without with the accessories slide/lock system IT’S EASY TO... IT’S EASY TO... get lower power access cable losses with direct terminals with contact between sliding retained fuselink and base shrouds terminals For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp CAMASTER & SAFELOC BS88 Fuseholders product guide CAMASTER IT’S EASY TO CHANGE! IT’S EASY TO... insert fuses, IT’S EASY TO... using captive install on DIN hinged screws Rail or bolted on on carrier panel without accessories IT’S EASY TO... IT’S EASY TO... assembly identify operated mutiple poles fuselink with a with ganging clip clip neon accessories indicator accessory IT’S EASY TO... IT’S EASY TO... access cable remove carrier terminals with from fuse base hinged shroud using unique patented CAM action For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp CAMASTER & SAFELOC BS88 Fuseholders product guide CAMASTER Features & Benefits Features Benefits DIN rail and screw mounting as Reduce inventory with less configurations standard Cost Saving of stock required Retro-fit back stud connections Fuse carrier with captive, hinged Reduce downtime and installation time screws and avoid losing screws during fuse replacement Time Neon indicator Reduce downtime by immediate location saving of operated fuse link Hinged cable terminal shrouds Reduce installing time, no need to remove screws to access the fuse base terminal Increased Protection to electrical shock for Base contacts fully shrouded accidental contact with live parts safety With patented CAM action the carrier Superior Easily extracted carrier needs up to 93% less extraction to performance remove carrier CAMASTER Cross Reference Cooper Bussmann MEM Lawson GE “Red Spot” Fuse & Neutral Links CM32FC 20MFB LBI20FC/FCBK RS20H Fuselink: CM32FCW 20MFBW LBI20FC/FCWH RS20HWH NITD2-32A CM32FC + 32BSC 20MFC LBI20BC/BCBK RS20P/G Neutral Link: CM32FCW + 32BSC 20MFCW LBI20FC/BCBK RS20P/GWH 32CMLC CM32FC + 32BSC 20MFD LBI32FC/FCBK RS20PH/G CM32F 32MFB LBI32FC/FCWH RS32H Fuselink: CM32FW 32MFBW LBI32BC/BCBK RS32HWH AAO 2 - 32 CM32F + 32BS 32MFC LBI32BC/BCWH RS32P Neutral Link: CM32FW + 32BS 32MFD LBI32FC/BCBK RS32PWH 32CML CM32F + 32BS 63MFB LBI63FC/FCBK RS32PH CM63F 63MFBW LBI63FC/FCWH RS63H Fuselink: CM63FW 63MFC LBI63BC/BCBK RS63HWH BAO35-63A CM63F + 63/100BS 63MFCW LBI63BC/BCWH RS63P Neutral Link: CM63FW + 63/100BS 63MFD LBI63FC/BCBK RS63PH 63/100CML CM63FW + 63/100BS - LBI63FC/BCWH RS63PHWH CM100F 100MFB LBI100FC/FCBK RS100H Fuselink: CM100FW 100MFBW LBI100FC/FCWH RS100HWH OSD80 - 100A CM100F + 63/100BS 100MFC LBI100BC/BCBK RS100P Neutral Link: CM100FW + 63/100BS 100MFCW LBI100BC/BCWH RS100PWH 63/100CML CM100F + 63/100BS 100MFD LBI100FC/BCBK RS100PH For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp Web services Contact Us: www.cooperbussmann.com EUROPEAN HEADQUARTERS Cooper Bussmann (UK) Ltd Cooper Bussmann website make available free Burton-on-the-Wolds information and other resources that include: LE12 5TH United Kingdom - Product data sheets for complete technical informa- www.cooperbussmann.com tion on Cooper Bussmann products - Online catalogues for the latest United States and Tel: 00 44 (0) 1509 882 737 European products Fax: 00 44 (0) 1509 882 786 TM - Safety BasICs for the essentials of electrical safety - Training modules for increasing skill levels of cus- WORLD HEADQUARTERS tomers and end-users Cooper Bussmann Inc. St Louis, Missouri 63178 - Cross referencing to find the correct Cooper USA Bussmann replacement for a competitor’s fuse 636-394-2877 www.cooperbussmann.com Your authorised Cooper Bussmann Distributor ©2005 Cooper Bussmann(UK) Ltd • Burton-on-the-Wolds, LE12 5TH United Kingdom Tel: +44 (0) 1509 882 737 - Fax: +44 (0) 1509 882 786 REORDER:FUSEHOLDERBRO sales@cooperbussmann.co.uk - www.cooperbussmann.com