™ OPTIMA OPM-1038 Overcurrent Protection Module - Fuseholder and Switch Series 13 1 Disconnect Switch for ⁄32˝ x 1 ⁄2˝ (10mm x 38mm) Fuses Physical Characteristics: • Small size matches 45mm IEC starter width. • Fits #8-18 AWG stranded wire, #10-18 AWG solid wire. • 3-pole version. • Handle and shaft required for through-the-door operation. (See ordering information on page 2). Product Features: • “Open” fuse indication lights. • Finger-safe terminals. (Qualified as IP2O per IEC529) • Cam action handle for easy module removal. 1 Catalog Symbol: • 35mm DIN-rail or screw panel mounting (#8 screw, 1 ⁄4˝ long). • Dead front construction. No exposed contacts for added safety. Series Fuse Type Communication • Option for remote “open fuse” status indication feature available O P M - 1 0 3 8 S W (reduces downtime). • Offered with Class CC rejection clips or European 10mm x Blank - 10 x 38mm C - Communication 38mm clips to meet global needs. or 13/32” x 1-1/2” Feature • Wire ready: Saves time as terminals are ready to accept R - Class CC wires. Materials: Grey Thermoplastic UL Flammability: UL 94VO Horsepower Rating of Switch: Agency Information: UL (see table below) V 240 480 600 3PH CSA Certified, C22.2 No. 39, Class 6225-01, File 47235 HP 5 10 15 IEC (see table below) Shipping Weight: Approx. 335g (.74 lb.) Carton Quantity: 1 Catalog SC Remote Open UL Information Number Electrical Rating Rating Clips Fuse Indication Std. File Guide IEC OPM-1038SW 30A, 600Vac UL/CSA * Non-rejection No Recognized (Max. 3 Watts per fuse) 10x 38mm or 32A, 660Vac IEC 13/32” x 1-1/2” UL 508 E161278 NLRV2 IEC 947-3 OPM-1038RSW 30A, 600Vac UL/CSA 100kA Rejection No Listed UL 508 E161278 NLRV OPM-1038SWC 30A, 600V UL/CSA * Non-rejection Yes Recognized (Max. 3 Watts per fuse) 10x 38mm or 32A, 660Vac IEC 13/32” x 1-1/2” UL 508 E161278 NLRV2 IEC 947-3 OPM-1038RSWC 30A, 600Vac UL/CSA 100kA Rejection Yes Listed Class CC UL 508 E161278 NLRV *Rating varies depending on fuse used in module, 100kA maximum.. CE logo denotes compliance with European Union Low Voltage Directive (50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Recommended Fuse Types: Bussmann Application Engineering at 636-527-1270 for more information. Class CC Midget (non-rejection) Applies to OPM-1038SW and OPM-1038RSW. LP-CC KTK KTK-R FNM FNQ-R FNQ Spare Fuseholder: Part No. 5TPH 0210 BU-SB10138 Page 1 of 3 Data Sheet 1103 BUSS 5.72∑ (± 0.045) (145.3mm) (± 1.14) Dimensional Data 4.25∑ (± 0.03) (108.0mm) (± 0.76) Communication 0.43∑ (± .03) Port 2T1 1L1 (10.9mm) (± .76) 1.38∑ 4T 2 1.76∑ (35.0mm) (6.9mm) 3L2 0.27∑ (44.7mm) 6T3 5L3 (18.8mm) 0.74∑ 0.31∑ (7.9mm) 0.57∑ (± 0.03) (14.5mm) (± 0.76) 3.74∑ (± 0.03) (95.0mm) (± 0.76) Communication 3.17∑ Port (80.5mm) 0.23∑ (5.8mm) 0.50∑ (12.7mm) 0.44∑ (11.2mm) 1.86∑ 0.224∑ 1.312∑ (47.2mm) (5.6mm) (± 0.01) Panel Mounting (33.3mm) Hole Pattern (± 0.25) 3.60∑ Panel Mounting (91.4mm) Hole Pattern Selector Handles - for use with shafts � 0.24˝ x 0.24˝ (� 6x6mm) NEMA IEC Weight Catalog Color Defeatable Padlockable type type (lbs) number All marked both O/l & Off/On 1 IP54 Black — — 0.09 CBDH1S 1 IP54 Red/Yel — — 0.09 CBDH2S 1 IP54 Black — Yes 0.12 CBDH15S 1 IP54 Red/Yel — Yes 0.12 CBDH16S 1,3R,12 IP65 Black — Yes 0.16 CBDH3S 1,3R,12 IP65 Red/Yel — Yes 0.16 CBDH4S 1,3R,12 IP65 Black Yes Yes 0.16 CBDH5S 1,3R,12 IP65 Red/Yel Yes Yes 0.16 CBDH6S Pistol Handles - for use with shafts � 0.24˝ x 0.24˝ (� 6x6mm) NEMA IEC Length Weight Catalog Color Marking Defeatable Padlockable type type inches/mm (lbs) number All marked both O/l & Off/On 1,3R,12 IP65 Black O/l & Off/On 1.8/45 Yes Yes 0.28 BDH56 1,3R,12 IP65 Red/Yel O/l & Off/On 1.8/45 Yes Yes 0.28 BDH57 1,3R,12 IP65 Black O/l & Off/On 2.6/65 Yes Yes 0.29 BDH58 1,3R,12 IP65 Red/Yel O/l & Off/On 2.6/65 Yes Yes 0.29 BDH59 1,3R,12,4,4X IP66 Black O/l & Off/On 2.6/65 Yes Yes 0.29 CDHXB65L6 1,3R,12,4,4X IP66 Red/Yel O/l & Off/On 2.6/65 Yes Yes 0.29 CDHXY65L6 Extended Shafts - Shaft Dimension (� 6x6mm ) For Handle Mounting Shaft Catalog Ordering Information for External Handle*: Type Depth Length Number ** 4.2 - 5.0˝ 3.3˝ (85mm) BDS85S OPTIMA Module + CDRKBS12 + Handle + Shaft 5.0 - 5.8˝ 4.1˝ (105mm) BDS105S 5.6 - 6.4˝ 4.7˝ (120mm) BDS120S = Complete Disconnect Switch (without fuses) Selector 6.0 - 6.7˝ 5.1˝ (130mm) BDS130S 7.1 - 8.7˝ 7.1˝ (180mm) BDS180S 1. Order Cooper Bussmann part number CDRKBS12. 10.7 - 11.5˝ 9.8˝ (250mm) BDS250S 13.8 - 14.6˝ 13.0˝ (330mm) BDS330S 2. Select the appropriate handle style (Selector or Pistol). 6.2 - 6.7˝ 5.9˝ (150mm) BDS150 3. Select the shaft corresponding to the handle type and 7.0 - 7.5˝ 6.7˝ (170mm) BDS170 mounting depth required. Pistol 10.7 - 11.3˝ 10.4˝ (265mm) BDS265 *All switchable OPM-1038 modules come standard with a small black handle Cooper 16.0 - 16.6˝ 15.8˝ (400mm) BDS400 Bussmann part number CDRKBS12 must be ordered for all through-the-door applications. 20.0 - 20.5˝ 19.7˝ (500mm) BDS500 Mounting depth is the distance from the outside of the door to the disconnect switch. Shaft ** can be cut to desired length. 0210 BU-SB10138 Page 2 of 3 Data Sheet 1103 OPEN FUSE INDICATION The examples shown below illustrate typical interface to Status Output Specifications: Programmable Logic Controllers. *Minimum operating voltage: 460Vac, 3-phase *Maximum operating voltage: 620Vac, 3-phase EXAMPLE 1: DIRECT INTERFACE TO PC/PLC PC / PLC Status output maximum conducting current: 40mA Status output maximum on resistance: 35 ohms STATUS OUTPUT @ 40mA Vcc (5V to 35V) Status output typical off resistance: >10 Mohm Pull up TTL Resistor Status output maximum turn-on and Digital (> 1K) Input turn-off delay: 850 milli-second Status Output Interface Specifications: Rated Voltage: Recommended 5-35Vdc, 300Vac max. Rated Current: 40mA max. Wire Size: #28-14 AWG Torque: 2.25 lb. in. EXAMPLE 2: INTERFACE TO PC / PLC WITH OPTICAL ISOLATION Open Fuse Indicator Status Output Description: PC / PLC STATUS The open fuse indicator status output acts very much like OUTPUT an on/off switch. With all three fuses in place and operating Vcc (5V to 35V) Optical properly, this status output has a high resistance value of Isolator Pull up TTL Resistor Digital greater than ten mega-ohms. When one or more of the (> 1K) Input fuses are open, the status output becomes turned-on with a resistance value less than 35 ohms. This status output withstands voltage (ac or dc) up to 35V at off-state Current- Limiting and conducts current up to 40 milli-amps at on-state. Resistor Applying voltage and current exceeding these limits will ISOLATED AC OR DC result in damage to the components inside this status POWER SOURCE output device permanently. There is some time-delay when the status output changes on/off state. The open fuse Note: When energized (switch in the “on” position), a low load terminal voltage will communications or status output device includes optical be present when fuses are open or when pullout module is removed. The leakage current is limited to .5mA maximum. isolators within the unit. Communications output states: Example of Output Voltage with three open fuses or pullout module removed. Catalog Number OPM-1038RSW, OPM-1038SW OPM-1038-RSWC, OPM-1038SWC Fuse Good NO - High Resistance, >10 megohms Types of Indication Standard Communication Opened Fuse NC - Low Resistance, < 35 ohms System Voltage Load Terminal Voltage (1L1-3L2-5L3) (2T1-4T2-6T3) 125Vdc * 12Vdc * 31Vdc * 480Vac, 3-phase 26Vac 56Vac 600Vac, 3-phase 33Vac 88Vac Note: Operating this device beyond the above limits will There is no voltage at the load terminals (2T1-4T2-6T3) on the switch version cause permanent damage to the components on (SW suffix) when the switch is in the “off” position. the board. *The communication device requires a minimum circuit voltage (1L1-3L2-5L3) of 460V for the status indicating device to operate. Below 460V, but above 120V, the For applications requiring status output below a system indicator lights will luminate, but there will not be any communication status output. voltage of 460V, contact Bussmann. The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical informa- tion that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. © 2010 Cooper Bussmann St. Louis, MO 63178 www.cooperbussmann.com 0210 BU-SB10138 Page 3 of 3 Data Sheet 1103