Edison product catalog Circuit Protection Products Index Catalog Number Page Catalog Number . . . . . . . . Page Catalog Number . . . . . . . . Page Catalog Number . . . . . . . . Page 12ABCNA(Amp) . . . . . . . . . . 124 ATC . . . . . . . . . . . . . . . . . . . . . 46 GDC (S506) . . . . . . . . . . . . . . 41 NO.263-R . . . . . . . . . . . . . . . 171 12CAV . . . . . . . . . . . . . . . . . . 124 ATM. . . . . . . . . . . . . . . . . . . . . 46 GMA . . . . . . . . . . . . . . . . . . . . 42 NO.2641 . . . . . . . . . . . . . . . . 171 12TDLEJ(Amp) . . . . . . . . . . . 127 BCM Fuse Blocks . . . . . . . . . 152 GMC . . . . . . . . . . . . . . . . . . . . 42 NO.2641-R . . . . . . . . . . . . . . 171 12THLEJ(Amp) . . . . . . . . . . . 127 BH Modular Blocks . . . . . . . . . . 154 GMD . . . . . . . . . . . . . . . . . . . . 42 NO.2642 . . . . . . . . . . . . . . . . 171 12TKLEJ(Amp) . . . . . . . . . . . 127 BMM Fuse Blocks. . . . . . . . . . . 152 H Fuseblocks . . . . . . . . . . . . 144 NO.2661 . . . . . . . . . . . . . . . . 171 12TXLEJ(Amp) . . . . . . . . . . . 127 Box Cover Units . . . . . . . . . . 155 HCLR . . . . . . . . . . . . . . . . . . . 29 NO.2661-R . . . . . . . . . . . . . . 171 15.5CAV, CAVH. . . . . . . . . . . 124 CCLB. . . . . . . . . . . . . . . . . . . . 52 HCTR . . . . . . . . . . . . . . . . . . . 29 NO.2662 . . . . . . . . . . . . . . . . 171 17.5ABGNA(Amp). . . . . . . . . 124 CCLW . . . . . . . . . . . . . . . . . . . 52 HEB. . . . . . . . . . . . . . . . . . . . 165 NO.2662-R . . . . . . . . . . . . . . 171 17.5CAV . . . . . . . . . . . . . . . . 124 CDNC . . . . . . . . . . . . . . . . . . 102 HET. . . . . . . . . . . . . . . . . . . . 165 NO.2664 . . . . . . . . . . . . . . . . 171 17.5TDLSJ(Amp) . . . . . . . . . 127 CDSC . . . . . . . . . . . . . . . . . . 102 HEX. . . . . . . . . . . . . . . . . . . . 165 NO.2664-R . . . . . . . . . . . . . . 171 17.5TFLSJ(Amp). . . . . . . . . . 127 CL1 . . . . . . . . . . . . . . . . . . . . . 98 HEY. . . . . . . . . . . . . . . . . . . . 165 NO.616 . . . . . . . . . . . . . . . . . 171 17.5TDMEJ(Amp) . . . . . . . . . 127 Clip Clamps. . . . . . . . . . . . . . 172 HKP Series . . . . . . . . . . . . . . 168 NO.626 . . . . . . . . . . . . . . . . . 171 17.5THMEJ(Amp) . . . . . . . . . 127 CM(XX)CF. . . . . . . . . . . . . . . 105 HM25. . . . . . . . . . . . . . . . . . . 137 NO.626-R . . . . . . . . . . . . . . . 171 17.5TKMEJ(Amp) . . . . . . . . . 127 CT . . . . . . . . . . . . . . . . . . . . . . 94 HM60. . . . . . . . . . . . . . . . . . . 137 NO.642-R . . . . . . . . . . . . . . . 171 2A1910-1. . . . . . . . . . . . . . . . 172 CVR-J . . . . . . . . . . . . . . . . . . 138 HPF. . . . . . . . . . . . . . . . . . . . 168 NO.663 . . . . . . . . . . . . . . . . . 171 24ABGNA(Amp) . . . . . . . . . . 124 CVRI-J. . . . . . . . . . . . . . . . . . 138 HVAC Disconnects . . . . . . . . 170 NO.663-R . . . . . . . . . . . . . . . 171 24CAV . . . . . . . . . . . . . . . . . . 124 CVR-RH . . . . . . . . . . . . . . . . 137 In-Line Fuseholders . . . . . . . 167 NZ01, NZ02. . . . . . . . . . . . . . . 99 24TDMEJ(Amp) . . . . . . . . . . 127 CVRI-RH . . . . . . . . . . . . . . . . 137 J Fuseblocks . . . . . . . . . . . . . 148 P. . . . . . . . . . . . . . . . . . . . . . . 40 24THMEJ(Amp) . . . . . . . . . . 127 C(XX)BS . . . . . . . . . . . . . . . . 108 JC__ . . . . . . . . . . . . . . . . . . . 111 PB1 & PB3 Series. . . . . . . . . 160 24TFMEJ(Amp). . . . . . . . . . . 127 C(XX)F . . . . . . . . . . . . . . . . . 108 JDL . . . . . . . . . . . . . . . . . . . . . 18 PB4, PB5 & PB7 Series . . . . 162 24TXMEJ(Amp). . . . . . . . . . . 127 C(XX)FBS . . . . . . . . . . . . . . . 108 JFL . . . . . . . . . . . . . . . . . . . . . 20 PONC . . . . . . . . . . . . . . . . . . 102 2703 . . . . . . . . . . . . . . . . . . . 130 D16, D27, D33, D125 . . . . . . . . 99 JHL . . . . . . . . . . . . . . . . . . . . . 59 R Fuseblocks . . . . . . . . . . . . . .144 3.6ABCNA(Amp). . . . . . . . . . 123 DRA-1, DRA-2. . . . . . . . . . . . 134 JM60 . . . . . . . . . . . . . . . 138, 142 RM25 . . . . . . . . . . . . . . . . . . . . 137 3.6ABWNA(Amp) . . . . . . . . . 123 E13S . . . . . . . . . . . . . . . . . . . . 60 KON . . . . . . . . . . . . . . . . 35, 102 RM60. . . . . . . . . . . . . . . . . . . 137 36ABGNA(Amp) . . . . . . . . . . 124 E15SF . . . . . . . . . . . . . . . . . . . 61 KOS . . . . . . . . . . . . . . . . . . 35, 102 S . . . . . . . . . . . . . . . . . . . . . . . .37 3.6ADLSJ(Amp) . . . . . . . . . . 127 E25SFX. . . . . . . . . . . . . . . . . . 64 LCL . . . . . . . . . . . . . . . . . . . . . .14 SA . . . . . . . . . . . . . . . . . . . . . . 38 3.6ADOSJ(Amp) . . . . . . . . . . 127 E50S . . . . . . . . . . . . . . . . . . . . 68 LCT . . . . . . . . . . . . . . . . . . . . . 91 SAFELOC HRC. . . . . . . . . . . 108 3.6CAV . . . . . . . . . . . . . . . . . 123 E50SF . . . . . . . . . . . . . . . . . . . 68 LCU. . . . . . . . . . . . . . . . . . . . . 14 SAMI Series . . . . . . . . . . . . . 164 3.6WDLSJ(Amp) . . . . . . . . . . 127 E60C . . . . . . . . . . . . . . . . . . . . .71 LENRK . . . . . . . . . . . . . . . . . . . 6 SCLR. . . . . . . . . . . . . . . . . . . . 11 3.6WDOSJ(Amp) . . . . . . . . . 127 E60SF . . . . . . . . . . . . . . . . . . . 73 LESRK . . . . . . . . . . . . . . . . . . . 6 SEC. . . . . . . . . . . . . . . . . . . . . 25 3.6WFLSJ(Amp) . . . . . . . . . . 127 E70SF . . . . . . . . . . . . . . . . . . . 75 LET . . . . . . . . . . . . . . . . . . . . . 91 SFC-Fuse-CAB . . . . . . . . . . . 172 3.6WFOSJ(Amp). . . . . . . . . . 127 EB3P. . . . . . . . . . . . . . . . . . . 134 LMMT . . . . . . . . . . . . . . . . . . . 91 SFE . . . . . . . . . . . . . . . . . . . . . 46 3.6WKLSJ(Amp) . . . . . . . . . . 127 EBS. . . . . . . . . . . . . . . . . . . . . 31 LMT. . . . . . . . . . . . . . . . . . . . . 91 SL . . . . . . . . . . . . . . . . . . . . . . 37 36ABGNA(Amp) . . . . . . . . . . 124 ECNR . . . . . . . . . . . . . . . . . . . . 1 MAI . . . . . . . . . . . . . . . . . . . . . 98 SPH50SP . . . . . . . . . . . . . . . 173 36CAV . . . . . . . . . . . . . . . . . . 124 ECSR . . . . . . . . . . . . . . . . . . . . 1 MAX . . . . . . . . . . . . . . . . . . . . 46 SPP40SP . . . . . . . . . . . . . . . 177 36TDQSJ(Amp). . . . . . . . . . . 127 EDCC . . . . . . . . . . . . . . . . . . . 27 MCL. . . . . . . . . . . . . . . . . . . . . 31 T. . . . . . . . . . . . . . . . . . . . . . . 39 36TFQSJ(Amp). . . . . . . . . . . 127 EECAP . . . . . . . . . . . . . . . . . 134 MDA . . . . . . . . . . . . . . . . . . . . 44 TC . . . . . . . . . . . . . . . . . . . . . . 40 36TXQEJ(Amp). . . . . . . . . . . 127 EFSCVR . . . . . . . . . . . . . . . . 134 MDL. . . . . . . . . . . . . . . . . . . . . 44 T Fuseblocks. . . . . . . . . . . . . 149 3835 Series. . . . . . . . . . . . . . 169 EHCC . . . . . . . . . . . . . . . . . . 132 MEN . . . . . . . . . . . . . . . . . . . . 33 TI__. . . . . . . . . . . . . . . . . . . . . 98 38CAV, CAVH . . . . . . . . . . . . 124 EHM . . . . . . . . . . . . . . . . . . . 132 MEQ . . . . . . . . . . . . . . . . . . . . 33 TJN . . . . . . . . . . . . . . . . . . . . . 22 4164 . . . . . . . . . . . . . . . . . . . . 55 EPDB Series . . . . . . . . . . . . . 157 MID . . . . . . . . . . . . . . . . . . . . . 33 TJS . . . . . . . . . . . . . . . . . . . . . 22 5.5ABWNA(Amp) . . . . . . . . . 123 EPWR . . . . . . . . . . . . . . . . . . 134 MKE . . . . . . . . . . . . . . . . . . . . 45 TL . . . . . . . . . . . . . . . . . . . . . . 39 5.5AMWNA(Amp) . . . . . . . . . 123 ERFL. . . . . . . . . . . . . . . . . . . . 45 MMT . . . . . . . . . . . . . . . . . . . . 94 UCL 25XX to 75XX . . . . . . . . . 47 5.5CAV, CAVH. . . . . . . . . . . . 123 ERFS. . . . . . . . . . . . . . . . . . . . 45 MOL . . . . . . . . . . . . . . . . . . . . 31 UCLA. . . . . . . . . . . . . . . . . . . . 47 7.2ABCNA(Amp). . . . . . . . . . 123 ET . . . . . . . . . . . . . . . . . . . . . . 94 MT. . . . . . . . . . . . . . . . . . . . . . 94 W. . . . . . . . . . . . . . . . . . . . . . . 38 7.2ABWNA(Amp) . . . . . . . . . 123 FE . . . . . . . . . . . . . . . . . . . . . . 94 MV055 Series . . . . . . . . . . . . 115 7.2AMWNA(Amp) . . . . . . . . . 123 FEE . . . . . . . . . . . . . . . . . . . . . 94 MV155 Series . . . . . . . . . . . . 119 7.2CAV . . . . . . . . . . . . . . . . . 123 FM. . . . . . . . . . . . . . . . . . . . . . 94 NCLR. . . . . . . . . . . . . . . . . . . . 11 7.2WKMSJ(Amp) . . . . . . . . . 127 FMM . . . . . . . . . . . . . . . . . . . . 94 NH. . . . . . . . . . . . . . . . . . . . . 100 8000 Series Fuseblocks 169 FP Series (Fusepullers) . . . . 172 NO.213 . . . . . . . . . . . . . . . . . 171 A3354705 . . . . . . . . . . . . . . . 124 FWA . . . . . . . . . . . . . . 61, 63, 65 NO.213-R . . . . . . . . . . . . . . . 171 A3354745 . . . . . . . . . . . . . . . 130 FWC . . . . . . . . . . . . . . . . . . . . 77 NO.216 . . . . . . . . . . . . . . . . . 171 ABC. . . . . . . . . . . . . . . . . . . . . 43 FWH . . . . . . . . . . . . . . 71, 73, 75 NO.216-R . . . . . . . . . . . . . . . 171 ACK. . . . . . . . . . . . . . . . . . . . . 54 FWJ. . . . . . . . . . . . . . . . . . 86, 88 NO.226 . . . . . . . . . . . . . . . . . 171 ACL . . . . . . . . . . . . . . . . . . . . . 54 FWP . . . . . . . . . . . . . . 79, 81, 83 NO.226-R . . . . . . . . . . . . . . . 171 AGC . . . . . . . . . . . . . . . . . . . . 43 G Fuseblocks . . . . . . . . . . . . 151 NO.242-R . . . . . . . . . . . . . . . 171 ALS . . . . . . . . . . . . . . . . . . . . . 54 GBB. . . . . . . . . . . . . . . . . . . . . 43 NO.2621 . . . . . . . . . . . . . . . . 171 ANL . . . . . . . . . . . . . . . . . . . . . 55 GDA (S501). . . . . . . . . . . . . . . 41 NO.2621-R . . . . . . . . . . . . . . 171 ANN. . . . . . . . . . . . . . . . . . . . . 56 GDB (S500). . . . . . . . . . . . . . . 41 NO.263 . . . . . . . . . . . . . . . . . 171 Edison circuit protection solutions comply with major industrial standards and agency requirements such as: BS, IEC, DIN, UL, NEMA, SAE, CSA, CE, C-UL, etc. and are manufactured at facilities that are ISO 9000 certified. This catalog is intended to present product data and provide technical information that will help the end user with designapplication. We reserve the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. We also reserve the right to change or update, without notice, any technical information contained in this catalog. Once a product has been selected, it should be tested by the user in all possible applications. Further, We take no responsibility for errors or omissions contained in this catalog, or for misapplication of any Edison product. Extensive product information is available in the Edison product data sheets available online at www.edisonfuse.com. ©2014 Table of Contents Page UL Fuses: Current Limiting Class RK5 Dual-Element, Time-Delay - ECNR/ECSR . . . . . . . . . . . . . . . . . . .1 Class RK1 Dual-Element, Time-Delay - LENRK/LESRK . . . . . . . . . . . . . . . . .6 Class RK Fast-Acting - NCLR/SCLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Class L Time-Delay - LCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Fast-Acting - LCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Class J Dual-Element, Time-Delay - JDL . . . . . . . . . . . . . . . . . . . . . . . . .18 Fast-Acting - JFL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Class T Extremely Fast-Acting - TJN/TJS . . . . . . . . . . . . . . . . . . . . . . . . .22 Class G SEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Class CC Time-Delay - EDCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Time-Delay - HCTR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Fast-Acting - HCLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 UL Fuses: General Purpose 13 1 Midget Fuses ( ⁄32" x 1 ⁄2") Fast-Acting - MCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Fast-Acting - MOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 13 3 ⁄32" x 1 ⁄8", Fast-Acting - EBS . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Time-Delay - MEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Time-Delay - MEQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Pin Indicating, Time-Delay - MID . . . . . . . . . . . . . . . . . . . . . . . . .33 Class H and KS "One-Time" Fast-Acting - KON/KOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Plug Fuses Rejection Base, Dual-Element, Time-Delay - S . . . . . . . . . . . . . .37 Rejection Base, Time-Delay - SL . . . . . . . . . . . . . . . . . . . . . . . . .37 Edison Base, Fast-Acting - W . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 S and SL Rejection Base Fuse Adapter SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Plug Fuses Edison Base, Dual-Element, Time-Delay - T . . . . . . . . . . . . . . . .39 Edison Base, Time-Delay - TL . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Edison Base, Dual-Element, Time-Delay - TC, P . . . . . . . . . . . . .40 5 x 20mm Fuses Ceramic, Fast-Acting - GDA (S501) . . . . . . . . . . . . . . . . . . . . . . .41 Glass, Fast-Acting - GDB (S500) . . . . . . . . . . . . . . . . . . . . . . . . .41 Glass, Time-Delay - GDC (S506) . . . . . . . . . . . . . . . . . . . . . . . . .41 Glass, Fast-Acting - GMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Glass, Medium Time-Delay - GMC . . . . . . . . . . . . . . . . . . . . . . . .42 Glass, Time-Delay - GMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 1 1 ⁄4" x 1 ⁄4" Fuses Glass, Fast-Acting - ABC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Glass, Fast-Acting - AGC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Ceramic, Very Fast-Acting - GBB . . . . . . . . . . . . . . . . . . . . . . . . .43 Ceramic, Time-Delay - MDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Glass, Time-Delay - MDL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Electronic & Electrical Fuse Displays & Assortments ERFL/ERFS, MKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Automotive Fuses Glass, Fast-Acting - SFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Blade, Fast-Acting – ATM, ATC, MAX . . . . . . . . . . . . . . . . . . . . .46 Special Purpose Fuses Cable Limiters UCL/UCLA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Capacitor Fuse, Non-Time-Delay CCLB/CCLW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Lift Truck Fuses ACK/ACL/ALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Limiters ANL Non-Time-Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 ANN Very Fast-Acting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 High Speed Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 JHL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 FWA, 5 - 30A (10 x 38mm) and 35 - 60A (21 x 51mm) . . . . . . . .61 FWA, 70 - 1000A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 FWA, 1000 - 4000A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 FWX, 1-50A (14 x 51mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 FWX, 35 - 2500A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 FWH, 0.25 - 30A (6 x 32mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 FWH, 1 - 30A (14 x 51mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 FWH, 35 - 1600A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 FWC, 6 - 32A (10 x 38mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 FWP, 1 - 50A (14 x 51mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 FWP, 20 - 100A (22 x 58mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 FWP, 5 - 1200A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 i Table of Contents Page Special Purpose Fuses (Con’t) FWJ, 20 - 30A (14 x 67mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 FWJ, 35 - 2000A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 British Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 LCT, LET, LMT, LMMT, 6 - 900A . . . . . . . . . . . . . . . . . . . . . . . . .91 CT, ET, FE, EET, FEE, FM, FMM, MT, MMT, 6 - 710A . . . . . . . .94 Trip Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Microswitch Adapter - MAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Type “D” Bottle Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 Neozed Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 NH Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 Canadian Fuses & Accessories Standard Code Fuses 250V & 600V KOS/KON/PONC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 CDSC/CDNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 Fuse Holders CAMaster HRC Fuse Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 SAFEloc HRCI-CB Fuse Holder . . . . . . . . . . . . . . . . . . . . . . . . .108 Medium Voltage Fuses R-Rated Fuses JCG, JCH, JCK, JCL, JCR, 25 - 450A (2.4 - 7.2kV) . . . . . . . . . .111 E-Rated Fuses MV055, 5 - 450A (5.5kV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 MV155, 5 - 200A (15.5kV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 Potential Transformer Fuses AB, AM and CAV Series (3.6 to 38kV) . . . . . . . . . . . . . . . . . . . .123 High Voltage DIN Distribution Fuses 3.6 to 36kV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126 Fuse Blocks, Holders & Misc. Class CC Global Modular Fuse Holders CH Series, 8x32, 10x38, 14x51, 22x58 . . . . . . . . . . . . . . . . . . .132 Class R H(K) and J Modular Knifeblade Blocks Class R H(K) 250 and 600V, Class J 600V . . . . . . . . . . . . . . . .136 Class J Power Distribution Fuse Blocks JM60_, 70 - 400A, 600V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142 Class H (K) and R Fuse Blocks H250, H600, R250 and R600 Series . . . . . . . . . . . . . . . . . . . . .144 Class J Fuse Blocks J600 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 Class T Fuse Blocks T300 and T600 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149 Class G Fuse Blocks BG and G Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 Class CC Fuse Blocks BCM and BMM Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 Modular Fuse blocks BH Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 Edison Base Plug Fuse Holders Box Cover Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155 Power Blocks Enclosed Power Distribution Blocks . . . . . . . . . . . . . . . . . . . . . .157 High SCCR Terminal Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Power Distrbution Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 SAMI Fuse Covers For Class J, RK, K5, H and Midget Fuses . . . . . . . . . . . . . . . . .164 In-line Fuse Holders Class CC and Midget Fuses - HEB/HET/HEY/HEX . . . . . . . . . .165 1 1 Panel Mount Fuse Holders ⁄4" x 1 ⁄4" Fuses - HKP, HKP-HH/HKP-W . . . . . . . . . . . . . . . . . .168 13 1 ⁄32" x 1 ⁄2" Fuses - HPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 13 1 Fuse Blocks ⁄32" x 1 ⁄2" Fuses - 3835 Series . . . . . . . . . . . . . . . . . . . . . . . . . .169 1 1 ⁄4" x 1 ⁄4" Fuses - S-8000 Series . . . . . . . . . . . . . . . . . . . . . . . . .169 HVAC Disconnects B22 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170 Fuse Reducers Class H, J, K, & R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 Spare Fuse Cabinet SFC-FUSE-CAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 Fuse Clip Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 Fuse Pullers FP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 Surge Protective Devices SurgePOD™ HEAVY DUTY NEMA 4X Rated HEAVY DUTY Type 1 UL Listed SPD . . . . . . .173 SurgePOD™ PRO NEMA 4X Rated PRO Type 1 UL Listed SPD . . . . . . . . . . . . . .177 Elements of a Practical Fuse Specification 180 Fuse Terminology 181 Cross Reference Guides 183 Quick Cross Reference Guide 190 ii Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section ECNR/ECSR Class RK5 Dual-Element Time-Delay Fuses Catalog Number ECNR (1 - 600A) 250Vac or Less Catalog Number ECSR (1 - 600A) 600Vac or Less ECNR/ECSR Specifications Amp Ratings Dual-Element Time-Delay ECNR 18 25 70 150 400 Voltage Rating: ECNR - 250Vac 29 30 75 175 450 ECNR - (1-60A, 110-200A) 125Vdc; 3 10 35 80 200 500 (225-600A) 250Vdc 4 12 40 90 225 600 ECSR - 600Vac 5 15 45 100 250 — ECSR - (1-30A, 70-600A) 300Vdc 6 17.5 50 110 300 — (35-60A) 250Vdc 7 20 60 125 350 — Amp Rating: 1 - 600A ECSR 18 25 70 150 400 Interrupting Rating: 200kA RMS Symmetrical Amps 29 30 75 175 450 3 10 35 80 200 500 Current Limiting: RK5 Fuse 4 12 40 90 225 600 5 15 45 100 250 — Agency Information: 6 17.5 50 110 300 — UL Listed for US and Canada, Class RK5, Guide JDDZ, File 7 20 60 125 350 — E162363 Interrupting Rating: ECNR/ECSR 20kA DC Benefits: Recommended Fuse Blocks: • True dual-element construction allows sizing of 125% Refer to pages 146 in this catalog. FLA for motor backup protection. • Superior overload and cycling capabilities. Recommended Upgrade: • Current limiting provides component short-circuit Class RK1 (LENRK/LESRK) for greater degree of protection. short-circuit protection. Applications: CROSS REFERENCE • Recommended for AC power distribution system mains, VOLTS EDISON MERSEN LITTELFUSE feeders, and branch circuits. 250 ECNR TR FLNR • Protection of motors and motor branch circuits. 600 ECSR TRS FLSR • Protection of transformers and other inductive loads. • All general-purpose applications including lighting, heating and other non-inductive loads. For additional information, visit www.edisonfuse.com 1 ECNR/ECSR Class RK5 Dual-Element Time-Delay Fuses ECNR/ECSR Dual Element Fuses These fuses are recommended for AC power distribution characteristics of these fuses typically allows them to be system mains, feeders and branch circuits having inductive sized closer to the running ampacity of inductive loads to loads (motors, transformers) or non-inductive loads reduce cost and provide improved overcurrent (lighting, heating) where the available short-circuit current protection. These fuses will override normal equipment does not exceed 200,000 RMS symmetrical amps. These current surges to reduce unnecessary fuse openings. They “dual-element, time-delay” fuses have minimum industry are the most popular fuses used in the industry and the standard time-delay of 10 seconds at 5 times the fuse rating most economical for most applications, especially motors (8 sec. minimum for 250V, 30A and less). The time-delay and transformers. They have moderate current limitation. Class R fuses will fit Class H, K and R fuse clips. Class R fuse clips will only accept Class R fuses. Fuses rated 600Vac or less may be applied at any lower voltage. Dimensions Ferrule Design–0 through 60 Amps Knife Blade–70 through 600 Amps Overall Max Catalog Length - in Diameter - in Number Amps AB 0-30 2 0.56 35-60 3 0.81 70-100 5.88 1.06 ECNR 110-200 7.13 1.56 225-400 8.63 2.38 450-600 10.38 2.88 0-30 5 0.81 35-60 5.5 1.06 65-100 7.88 1.11 ECSR 110-200 9.63 1.61 225-400 11.63 2.34 450-600 13.38 2.88 2 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting Application UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Section Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices ECNR/ECSR Class RK5 Dual-Element Time-Delay Fuses Average Melt Time-Current Curves Cat No. ECNR (Amp) For additional information, visit www.edisonfuse.com 3 8 10 15 30 60 100 200 400 600 ECNR/ECSR Class RK5 Dual-Element Time-Delay Fuses Average Melt Time-Current Curves Cat No. ECSR (Amp) AMP AMP RATING RATING 100 100 10 10 1 1 .1 .1 .01 RMS SYMMETRICAL CURRENTS IN AMPS .01 RMS SYMMETRICAL CURRENTS IN AMPS 4 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting TIME IN SECONDS .1 1A 2A 4A 10 5A 8A 100 700 TIME IN SECONDS 10 10A 15A 30A 100 60A 100A 200A 400A 1,000 600A 10,000 20,000 Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section ECNR/ECSR Class RK5 Dual-Element Time-Delay Fuses Peak Let-Through Current Curves ECNR ECSR RMS SYMMETRICAL CURRENTS IN AMPS RMS SYMMETRICAL CURRENTS IN AMPS A—B=ASYMMETRICAL AVAILABLE PEAK (2.3 x SYMM RMS AMPS) A—B=ASYMMETRICAL AVAILABLE PEAK (2.3 x SYMM RMS AMPS) Current Limitation Tables ECNR* ECSR* Available Available Fault Apparent Effective Let-Through Amps Fault Apparent Effective Let-Thruough Amps Current Fuse Amp Ratings Current Fuse Fuse Amp Ratings RMS Amps 30A 60A 100A 200A 400A 600A RMS Amps 30A 60A 100A 200A 400A 600A 5,000 1,050 2,070 2,820 4,300 5,000 5,000 5,000 1,290 2,070 2,980 5,000 5,000 5,000 10,000 1,310 2,570 3,630 5,400 8,700 10,000 10,000 1,640 2,590 3,810 6,500 8,800 10,000 15,000 1,490 2,920 4,140 6,200 9,900 15,000 15,000 1,890 2,940 4,400 7,500 10,200 15,000 20,000 1,630 3,200 4,500 6,800 10,700 16,100 20,000 2,110 3,250 4,800 8,300 11,400 18,200 25,000 1,720 3,420 4,800 7,200 11,400 17,200 25,000 2,260 3,470 5,200 8,900 12,400 19,600 30,000 1,840 3,630 5,100 7,700 12,100 18,300 30,000 2,420 3,660 5,500 9,600 13,200 21,100 35,000 1,920 3,810 5,400 8,100 12,600 19,200 35,000 2,570 3,850 5,800 10,100 14,100 22,400 40,000 2,000 3,980 5,600 8,500 13,100 19,900 40,000 2,670 4,030 6,000 10,500 14,700 23,400 50,000 2,140 4,200 6,000 9,100 14,000 21,400 50,000 2,890 4,300 6,500 11,400 16,000 25,300 60,000 2,260 4,500 6,400 9,600 14,900 22,600 60,000 3,060 4,500 6,900 12,100 17,200 27,000 80,000 2,450 4,900 7,000 10,600 16,000 24,600 80,000 3,360 4,900 7,600 13,400 19,100 29,500 100,000 2,620 5,200 7,500 11,400 17,100 26,200 100,000 3,630 5,200 8,200 14,400 20,700 31,700 150,000 2,920 5,800 8,300 13,000 19,200 29,200 150,000 4,100 5,800 9,300 16,500 23,900 36,300 200,000 3,140 6,200 8,900 14,300 20,800 31,700 200,000 4,400 6,100 10,400 18,300 26,700 39,500 *"Apparent Let-Through Amps" values are read from "Peak Let-Through Current Curves" and the peak current value divided by 2.3 Asymmetry Factor. For additional information, visit www.edisonfuse.com 5 3 PEAK LET-THROUGH CURRENT IN AMPS X10 AMP RATING 3 PEAK LET-THROUGH CURRENT IN AMPS X10 AMP RATING LENRK/LESRK Class RK1 Dual-Element Time-Delay Fuses Catalog Number LENRK (0.2 - 600A) 250Vac or Less Catalog Number LESRK (0.25 - 600A) 600Vac or Less LENRK/LESRK Specifications Amp Ratings Dual-Element Time-Delay LENRK 0.2 2 6.25 40 175 Voltage Rating: LENRK - 250Vac, LESRK - 600Vac 0.3 2.25 8 45 200 0.4 2.5 9 50 225 Amp Rating: 0.2 - 600A 0.5 3 10 60 250 Interrupting Rating: 200kA RMS Symmetrical Amps 0.6 3.2 12 70 300 0.8 3.5 15 80 350 Current Limiting: RK1 Fuse 14 17.5 90 400 1.125 4.5 20 100 450 Agency Information: 1.4 5 25 110 500 UL Listed, Class RK1, Guide JDDZ, File E162363 1.6 5.6 30 125 600 CSA Certified, HRCI-R per C22.2, No. 248.12 1.8 6 35 150 LESRK Self-Certified DC Ratings: 0.5 2.5 7 40 175 Voltage Rating: LENRK (0-60A) 125Vdc; (70-600A) 250Vdc 0.6 2.8 8 45 200 LESRK (0.25-600A) 300Vdc Interrupting Rating: LENRK/LESRK 20kA DC 13 9 50 225 1.125 3.2 10 60 250 1.25 3.5 12 70 300 1.4 4 15 80 350 1.5 4.5 17.5 90 400 1.6 5 20 100 450 1.8 5.6 25 110 500 26 30 125 600 2.25 6.25 35 150 Benefits: • True dual-element spring - trigger construction allows Recommended Fuse Blocks: sizing of 125% FLA for motor backup protection. Refer to pages 145 and 146 in this catalog. • Superior overload and cycling capabilities. • Extremely current limiting provides superior short-circuit Recommended Upgrade: component protection. None. Applications: CROSS REFERENCE • Recommended for AC power distribution system mains, VOLTS EDISON MERSEN LITTELFUSE feeders, and branch circuits. 250 LENRK A2DR LLNRK • Protection of motors and motor branch circuits. 600 LESRK A6DR* LLSRK • Type 2 “No Damage” protection for IEC components. *Not dual element 110 - 600 Amp • All general-purpose applications including lighting, heating and other non-inductive loads. 6 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section LENRK/LESRK Class RK1 Dual-Element Time-Delay Fuses LENRK/LESRK Dual-Element Fuses True Dual-Element Construction The application recommended for these fuses is exactly the same as for the Edison ECNR/ECSR fuses except for the advantages of greater current limitation. The Edison Insulated end-caps to prevent LENRK/LESRK fuses have up to 40% more current accidental contact with live parts. 2 limitation and up to 350% more Amps-Squared-Second (I t) limitation under fault conditions than Edison ECNR/ECSR fuses to reduce potential for damage. In addition, LENRK/LESRK fuses allow better selectivity for electrical power system designers and better short-circuit protection for breakers having inadequate interrupting ratings. ECNR/ECSR and LENRK/LESRK fuse lines are physically Short-circuit element interchangeable (and electrically interchangeable per UL equipment listing conditions) and are recommended as a practical, economical way to upgrade systems for many Overload element situations. Class R fuses will fit Class H, K and R fuse clips. Class R fuse clips will only accept Class R fuses. Fuses rated 600Vac or less may be applied at any lower voltage. Dimensions Ferrule Design–0 through 60 Amps Knife Blade–70 through 600 Amps Overall Max Catalog Length - in Diameter - in Number Amps AB 0-30 2 0.56 35-60 3 0.81 70-100 5.88 1.10 LENRK 110-200 7.13 1.61 225-400 8.63 2.38 450-600 10.38 2.88 0-30 5 0.81 35-60 5.5 1.06 70-100 7.88 1.11 LESRK 110-200 9.63 1.61 225-400 11.63 2.36 450-600 13.38 2.88 For additional information, visit www.edisonfuse.com 7 LENRK/LESRK Class RK1 Dual-Element Time-Delay Fuses Average Melt Time-Current Curves LENRK (Amp) LESRK (Amp) AMP RATING AMP RATING 300 100 10 1 .1 .01 CURRENT IN AMPS RMS SYMMETRICAL CURRENT IN AMPS 8 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting TIME IN SECONDS .1 1 /10 15 /100 2 /10 3 /10 4 1 /10 /2 6 /10 8 /10 1 1 1 1 /4 6 1 /10 2 1 2 /2 2 3 /10 4 5 1 6 /4 10 8 10 12 100 1,000 TIME IN SECONDS 1 /10 15 /100 2 /10 3 /10 4 1 /10 /2 6 /10 8 /10 1 1 1 /4 6 1 /10 2 1 2 /2 2 3 /10 4 5 1 6 /4 8 10 12 UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section LENRK/LESRK Class RK1 Dual-Element Time-Delay Fuses Average Melt Time-Current Curves LENRK LESRK AMP RATING 300 200 100 80 60 40 30 20 10 8 6 4 3 2 1 .8 .6 .4 .3 .2 .1 .08 .06 .04 .03 .02 .01 RMS SYMMETRICAL CURRENT IN AMPS For additional information, visit www.edisonfuse.com 9 TIME IN SECONDS 20 15A 20A 30 30A 40 60 80 60A 100 100A 200 300 200A 400 600 400A 800 1,000 600A 2,000 3,000 4,000 6,000 8,000 10,000 LENRK/LESRK Class RK1 Dual-Element Time-Delay Fuses Peak Let-Through Current Curves* LENRK LESRK B B 400,000 400,000 300,000 300,000 200,000 200,000 100,000 100,000 80,000 80,000 60,000 60,000 600 600 50,000 50,000 400 400 40,000 40,000 30,000 30,000 200 200 20,000 20,000 100 100 60 60 10,000 10,000 8,000 8,000 30 30 6,000 6,000 5,000 5,000 4,000 4,000 3,000 3,000 A A 2,000 2,000 1,000 1,000 RMS SYMMETRICAL CURRENTS IN AMPS RMS SYMMETRICAL CURRENTS IN AMPS A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) *Curves test data obtained at 15% short-circuit power factor when possible. Current Limtation Tables** LENRK RMS & Peak Let-Through Currents (kA) LESRK RMS & Peak Let-Through Currents (kA) Available Available Fault Apparent Effective Let-Through Amps (kA) Fault Apparent Effective Let-Through Amps (kA) current 30 60 100 200 400 600 current 30 60 100 200 400 600 RMS Amps IRMS Ip IRMS Ip IRMS Ip IRMS Ip IRMS Ip IRMS Ip RMS Amps IRMS Ip IRMS Ip IRMS Ip IRMS Ip IRMS Ip IRMS Ip 1,000 11 12 12 121 21 2 1,000 11 12 12 121 21 2 2,000 12 13 24 252 52 5 2,000 12 13 24 242 42 4 3,000 12 13 24 363 73 7 3,000 12 13 24 363 73 7 5,000 12 24 25 375 12 5 12 5,000 12 24 25 375 12 5 12 10,00013 24 26 497 15 9 21 10,00013 25 36 497 16 9 21 15,00013 25 36 4 10 7 17 10 23 15,00013 25 37 5 11 8 18 10 24 20,00013 26 37 5 11 8 19 11 25 20,00013 36 37 5 12 8 19 11 26 25,00013 36 37 5 12 9 20 12 27 25,00024 36 38 5 12 9 21 12 28 30,00023 36 38 5 12 9 21 13 29 30,00024 36 48 6 13 10 22 13 30 35,00024 37 48 6 13 10 22 13 30 35,00024 37 49 6 14 10 23 13 31 40,00024 37 49 6 13 10 23 13 31 40,00024 37 49 6 14 10 24 14 32 50,00024 37 49 6 14 10 24 14 33 50,00025 38 4 10 7 15 11 26 15 35 60,00024 38 4 10 7 15 11 26 15 35 60,00025 38 4 10 7 16 12 28 16 37 70,00024 38 4 10 7 16 12 27 16 36 70,00025 48 5 11 7 17 13 29 17 39 80,00025 48 5 11 7 16 12 28 17 38 80,00025 49 5 11 8 18 13 30 17 40 90,00025 49 5 11 7 17 13 29 17 39 90,00025 49 5 12 8 18 13 31 18 42 100,00025 49 5 11 8 18 13 30 17 40 100,00026 49 5 12 8 19 14 32 19 44 150,00026 4 10 5 13 8 19 16 36 20 46 150,00036 5 11 6 14 9 21 16 36 22 50 200,00036 5 11 6 14 9 21 18 42 22 50 200,000 3 75 12 7 15 10 23 17 40 23 54 **"Apparent Let-Through Amps" values are read from "Peak Let-Through Current Curves" and the peak current value divided by 2.3 Asymmetry Factor. 10 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS 1,000 2,000 3,000 4,000 5,000 6,000 8,000 10,000 20,000 30,000 40,000 50,000 60,000 80,000 100,000 200,000 AMP RATING INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS 1,000 2,000 3,000 4,000 5,000 6,000 8,000 10,000 20,000 30,000 40,000 50,000 60,000 80,000 100,000 200,000 AMP RATING Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section NCLR Class RK1 Fast-Acting Fuses SCLR Class RK1 Fast-Acting Fuses Catalog Number NCLR (1- 600A) 250Vac or Less Catalog Number SCLR (1- 600A) 600Vac or Less NCLR/SCLR Specifications Amp Ratings Fast-Acting NCLR 1 10 35 80 175 400 Voltage Rating: NCLR - 250Vac, SCLR - 600Vac 3 12 40 90 200 450 4 15 45 100 225 500 Amp Rating: 1 - 600A 5 20 50 110 250 600 6 25 60 125 300 — Interrupting Rating: 200kA RMS Symmetrical Amps 8 30 70 150 350 — Current Limiting: RK1 Fuse SCLR 18 30 70 175 450 Agency Information: 2 10 35 80 225 500 UL Listed, Class RK1, Guide JDDZ, File E162363 3 12 40 90 250 600 CSA Certified per C22.2, No. 248.12 4 15 45 100 300 — 5 20 50 110 350 — Self-Certified DC Ratings: 6 25 60 125 400 — Voltage Rating: NCLR (1-600) 250Vdc SCLR (1-600) 300Vdc Interrupting Rating: NCLR/SCLR 10kA DC Dimensions Ferrule Design–0 through 60 Amps Knife Blade–70 through 600 Amps Benefits: Recommended Fuse Blocks: • No intentional time-delay opens quickly on overload Refer to pages 145 and 146 in this catalog. current. Recommended Upgrade: Applications: LENRK/LESRK. • Recommended for protection on non-inductive loads such as lighting and resistance heating circuits. CROSS REFERENCE • Use to protect lower interrupting rating circuit breakers in VOLTS EDISON MERSEN LITTELFUSE series rated applications. 250 NCLR A2KR KLNR 600 SCLR A6KR* KLSR* * Larger body size on blade type. For additional information, visit www.edisonfuse.com 11 NCLR Class RK1 Fast-Acting Fuses SCLR Class RK1 Fast-Acting Fuses Dimensions Overall Max Catalog Length - in Diameter - in Number Amps AB 0-30 2 0.56 35-60 3 0.81 70-100 5.88 1.10 NCLR 110-200 7.13 1.61 Ferrule Design–0 through 60 Amps 225-400 8.63 2.38 450-600 10.38 2.88 0-30 5 0.81 35-60 5.5 1.06 70-100 7.88 1.11 SCLR 110-200 9.63 1.61 225-400 11.63 2.36 Knife Blade–70 through 600 Amps 450-600 13.38 2.88 Application: Edison NCLR/SCLR Class RK1 fast-acting fuses are Average Time-Current Curves recommended for general power distribution system use for main, feeder and branch circuits having a high percentage Cat. No. NCLR (Amp) and SCLR (Amp) of non-inductive loads such as heating and lighting. NCLR/SCLR fuses are suitable for circuit breaker AMP RATING protection.* When NCLR/SCLR fast-acting fuses are used 300 for inductive loads, the fuses usually require oversizing to 200 override normal transient current surges of motors and transformers. Oversizing fuses usually increases fuse and equipment cost and reduces overcurrent protection. (For 100 inductive loads, LENRK/LESRK fuses are recommended). 80 60 NCLR/SCLR Class RK1 fast-acting fuses are physically interchangeable with other Class R fuses. They will replace 40 Class K or Class H fuses in standard fuse clips. 30 *When used as recommended by a specific circuit breaker manufacturer for a 20 specific application. 10 8 6 4 3 2 1 .8 .6 .4 .3 .2 .1 .08 .06 .04 .03 .02 .01 RMS SYMMETRICAL CURRENT IN AMPS 12 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting TIME IN SECONDS 30A 40 60 80 60A 100 100A 200 300 200A 400 400A 600 800 600A 1,000 2,000 3,000 4,000 6,000 8,000 10,000 Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section NCLR Class RK1 Fast-Acting Fuses SCLR Class RK1 Fast-Acting Fuses Peak Let-Through Current Curves* NCLR SCLR B B 400,000 400,000 300,000 300,000 200,000 200,000 100,000 100,000 80,000 80,000 600 600 60,000 60,000 50,000 50,000 400 400 40,000 40,000 30,000 30,000 200 200 20,000 20,000 100 100 10,000 10,000 60 60 8,000 8,000 6,000 6,000 30 30 5,000 5,000 4,000 4,000 3,000 3,000 A A 2,000 2,000 1,000 1,000 RMS SYMMETRICAL CURRENTS IN AMPS RMS SYMMETRICAL CURRENTS IN AMPS A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) *Curves test data obtained at 15% short-circuit power factor when possible. Current Limitation Tables** NCLR SCLR ( ) ( ) NCLR – RMS & Peak Let-Through Currents kA SCLR – RMS & Peak Let-Through Currents kA Prosp. Fuse Size Prosp. Fuse Size Short 30 60 100 200 400 600 Short 30 60 100 200 400 600 C.C. I I I I I I I I I I I I C.C. I I I I I I I I I I I I RMS p RMS p RMS p RMS p RMS p RMS p RMS p RMS p RMS p RMS p RMS p RMS p 5,000 12 13 24 365 10 5 12 5,000 12 13 24 365 12 5 12 10,00012 13 25 386 14 8 19 10,00012 24 25 487 15 9 20 15,00013 24 26 497 17 10 22 15,00013 24 36 4 10 8 18 11 24 20,00013 24 36 4 10 8 19 11 25 20,00013 25 37 5 11 9 20 12 28 25,00013 25 37 4 10 9 20 12 27 25,00013 25 37 5 12 10 22 13 31 30,00013 25 37 5 11 10 22 13 29 30,00013 25 38 5 13 10 24 14 33 35,00013 25 38 5 12 10 23 13 31 35,00024 25 48 6 13 11 25 15 35 40,00013 25 38 5 12 10 24 14 32 40,00024 26 49 6 14 11 26 16 37 50,00024 25 49 6 13 11 26 15 36 50,00024 36 49 6 14 12 28 17 40 60,00024 26 49 6 14 12 28 17 38 60,00024 36 4 10 7 15 13 30 19 43 70,00024 36 49 6 15 13 29 17 40 70,00024 37 5 10 7 16 14 32 20 45 80,00024 36 4 10 7 15 13 30 18 42 80,00024 37 5 11 7 17 14 33 21 48 90,00024 36 5 10 7 16 13 31 19 44 90,00025 37 5 12 8 18 15 35 22 50 100,00024 37 5 11 7 17 14 32 20 46 100,00025 37 5 12 8 19 16 36 23 52 150,00025 37 5 13 8 19 16 37 23 53 150,00025 48 6 14 9 21 18 41 26 60 200,00025 38 6 14 9 21 18 41 26 59 200,00036 49 7 15 10 23 20 46 29 66 **"Apparent Let-Through Amps" values are read from "Peak Let-Through Current Curves" and the peak current value divided by 2.3 Asymmetry Factor. For additional information, visit www.edisonfuse.com 13 INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS 1,000 2,000 3,000 4,000 5,000 6,000 8,000 10,000 20,000 30,000 40,000 50,000 60,000 80,000 100,000 200,000 AMP RATING INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS 1,000 2,000 3,000 4,000 5,000 6,000 8,000 10,000 20,000 30,000 40,000 50,000 60,000 80,000 100,000 200,000 AMP RATING Class L Time-Delay Fuses Class L Fast-Acting Fuses Catalog Number LCL (300 - 4000A) Time-Delay 600Vac or Less Catalog Number LCU (601 - 6000A) Fast-Acting 600Vac or Less LCL/LCU Specifications Amp Ratings LCL: Time-Delay LCL LCU: Fast-Acting 300* 650 801 1350 1800 3500 400* 700 900 1400 2000 4000 Voltage Rating: LCL - 600Vac, LCU - 600Vac 500* 750 1000 1500 2500 — 601 800 1200 1600 3000 — Amp Rating: LCL: 300 - 4000A LCU LCU: 601 - 6000A 601 800 1350 1800 3000 6000 Interrupting Rating: 200kA RMS Symmetrical Amps 650 1000 1500 2000 3500 — 700 1200 1600 2500 4000 — Current Limiting: Class L Fuse * Not UL Listed (See note below). Agency Information: LCL: Time-delay of 5 seconds minimum at 500% rated current UL Listed, Class L, Guide JDDZ, File E162363 allows closer sizing. CSA Certified HRC-L per C22.2, No. 248.10 NOTE: LCL 300 - 500 amp fuses are physically the same as 800 amp size; Use in 800 amp switch where load current is not fully utilized and a smaller fuse amp size is desired. Also useful in new installations to allow for future upgrades in service. Benefits: Recommended Sizing: • “O-ring” construction insures maximum current limiting LCL: 150% or more of motor full load current. ability. • Silver plated micro-peened terminals. Recommended Upgrade: • High strength melamine fuse tubes. None Available. Applications: CROSS REFERENCE • LCL: Recommended for AC power distribution system EDISON MERSEN LITTELFUSE mains and large feeders. LCL A4BY KLP-C, KLLU • LCU: Recommended for non-inductive heating and LCU None None lighting loads. Also suitable for protection of low interrupting rating circuit breakers. 14 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Class L Time-Delay Fuses Class L Fast-Acting Fuses Average Time-Current Curves Cat. No.LCL (Amp) Cat. No. LCU (Amp) AMP AMP RATING RATING 300 300 200 100 100 80 60 40 30 20 10 10 8 6 4 3 2 1 1 .8 .6 .4 .3 .2 .1 .1 .08 .06 .04 .03 .02 .01 .01 RMS SYMMETRICAL CURRENT IN AMPS CURRENT IN AMPS For additional information, visit www.edisonfuse.com 15 TIME IN SECONDS 1,000 800A 1200A 1600A 2000A 2500A 3000A 10,000 4000A 100,000 200,000 TIME IN SECONDS 1,000 800A 2,000 1200A 1350A 3,000 1600A 4,000 2000A 6,000 3000A 8,000 4000A 10,000 6000A 20,000 30,000 40,000 60,000 100,000 Class L Time-Delay Fuses Class L Fast-Acting Fuses Peak Let-Through Current Curves* LCL LCU B 400,000 B 400,000 6,000 300,000 4,000 3,000 4,000 200,000 2,500 3,000 2,000 2,500 100,000 1,600 2,000 1,200 100,000 1,600 1,200 800 80,000 800 60,000 601 40,000 30,000 20,000 10,000 10,000 8,000 6,000 4,000 A 3,000 A 2,000 1,000 1,000 RMS SYMMETRICAL CURRENTS IN AMPS RMS SYMMETRICAL CURRENTS IN AMPS A-B= ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) *Curves test data obtained at 15% short-circuit power factor when possible. Current Limitation Tables** LCL LCU Current-Limiting Effects Current-Limiting Effects *Prosp. Let-Through Current (Apparent RMS Symmetrical) *Prosp. Let-Through Current (Apparent RMS Symmetrical) S.C.C. Versus Fuse Ratings S.C.C. Versus Fuse Ratings 800A 1200A 1600A 2000A 3000A 4000A 800A 1200A 1600A 2000A 3000A 4000A 6000A 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 9,700 10,000 10,000 10,000 10,000 10,000 10,000 15,000 13,000 15,000 15,000 15,000 15,000 15,000 15,000 11,500 13,000 15,000 15,000 15,000 15,000 15,000 20,000 14,000 18,000 20,000 20,000 20,000 20,000 20,000 12,500 15,400 18,000 20,000 20,000 20,000 20,000 25,000 16,000 21,000 25,000 25,000 25,000 25,000 25,000 14,000 16,000 21,000 25,000 25,000 25,000 25,000 30,000 16,500 22,500 26,000 30,000 30,000 30,000 30,000 14,500 17,500 22,000 27,000 30,000 30,000 30,000 40,000 18,000 25,500 29,000 34,000 40,000 40,000 35,000 15,000 18,000 24,000 28,000 35,000 35,000 35,000 50,000 19,000 27,000 32,000 37,000 42,000 45,000 40,000 15,500 19,000 25,000 29,000 40,000 40,000 40,000 60,000 21,000 29,000 35,000 41,000 45,000 50,000 50,000 16,000 21,000 26,000 32,000 44,000 48,000 50,000 80,000 24,000 32,000 39,000 45,000 51,000 57,000 60,000 19,000 24,000 28,000 34,000 48,000 51,000 60,000 100,000 26,000 36,000 41,000 51,000 55,000 64,000 80,000 20,000 26,000 31,000 36,000 52,000 60,000 80,000 150,000 30,000 40,000 48,000 58,000 66,000 78,000 100,000 23,000 29,000 39,000 40,000 57,000 68,000 95,000 200,000 34,000 45,000 52,000 65,000 76,000 92,000 150,000 27,000 34,000 40,000 47,000 70,000 79,000 115,000 * RMS Symmetrical Amps Short-Circuit Current. 200,000 29,000 39,000 43,000 50,000 78,000 93,000 141,000 NOTE: Data derived from Current Limiting Curves. *RMS Symmetrical Amps Short-Circuit Current. NOTE: Data derived from Current Limiting Curves. **"Apparent Let-Through Amps" values are read from "Peak Let-Through Current Curves" and the peak current value divided by 2.3 Asymmetry Factor. 16 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting INSTANTENOUS PEAK LET-THROUGH CURRENT AMPS 1,000 10,000 100,000 200,000 AMP RATING INSTANTENOUS PEAK LET-THROUGH CURRENT AMPS 1,000 2,000 3,000 4,000 6,000 8,000 10,000 20,000 30,000 40,000 60,000 80,000 100,000 200,000 AMP RATING Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Class L Time-Delay Fuses Class L Fast-Acting Fuses General Application: Edison Class L fuses, Catalog Numbers LCL time-delay or spare “time-delay” fuses shall be Catalog Number LCL and LCU fast acting are recommended for high capacity main, “fast-acting” fuses shall have silver links and be Catalog feeder or branch circuits in power distribution systems and Number LCU. Fuses shall be Edison fuses or equivalent for special applications such as system upgrading, install submitted to the design engineer for approval 10 days prior ahead of network protectors, etc. The choice of LCL or LCU to the project bid date. depends on the extent of mixed inductive and non-inductive loads diversity. Apply LCL fuses for protection of large Mounting of “Bolt-On” Fuses shall be made by installing individual motor circuits. Size LCL fuses at 150% or more of stainless steel bolts of correct number, diameter and the motor nameplate current rating by checking starting length*, stainless steel spring washers on each side of the characteristics against minimum melt Time-Current Curve. bolt and stainless steel nuts. The nuts shall be tightened to the torque recommended by ASTM Standards for the bolt Class L Fuses Specification: size used. Install Class L Fuses in switches rated 601-6000 *Bolts shall have the largest diameter to fit fuse bolt holes and length to allow amps and in AMP RATINGS and “time-delay” or full nut thread engagement. Bolts shall be installed in each fuse mounting “fast-acting” types as shown on the plans. Installed and hole. Class L Fuse Dimensions - inches For additional information, visit www.edisonfuse.com 17 JDL Class J Time-Delay Fuses Catalog Number JDL (1 - 600A) 600Vac or Less Amp Ratings JDL Specifications Dual-Element, Time-Delay JDL 14 12 40 100 250 Voltage Rating: JDL - 600Vac 1.25 5 15 45 110 300 300Vdc 1.6 5.6 17.5 50 125 350 26 20 60 150 400 Amp Rating: 1 - 600A 2.5 7 25 70 175 450 38 30 80 200 500 Interrupting Rating: 200kA RMS Symmetrical Amps 3.5 10 35 90 225 600 100kA DC Current Limiting: Class J Fuse Edison JDL Class J fuses are among the most current limiting time-delay fuses available. Their small physical size Agency Information: and high performance characteristics makes Class J fuses UL Listed, Class J, Guide JDDZ, File E162363 ideal for any space-limited application. CSA Certified per C22.2, No. 248.8 Benefits: Recommend Fuse Blocks: • Space saving dimensions vs. Class R. Refer to page 129 in this catalog. • Dual-Element construction provides superior time-delay to pass harmless motor or transformer surges. Recommend Upgrade: • High performance with fatigue - free cycling capabilities. None. • Extremely current limiting. Applications: CROSS REFERENCE • Recommended for Type 2 “No Damage” protection of IEC EDISON MERSEN LITTELFUSE style motor starters and contactors. JDL AJT JTD • Use to protect lower interrupting rating circuit breakers. • All general purpose circuits with inductive (high inrush) loads, including motor and motor branch circuits, and transformer circuits. Also suitable for lighting loads. 18 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section JDL Class J Time-Delay Fuses Average Time-Current Curve Peak Let-Through Current Curves Cat. No. JDL (Amp) Cat. No. JDL (Amp) B Amp 100,000 Rating 80,000 300 60,000 200 40,000 10 30,000 100 7 80 20,000 6 60 3 40 30 10,000 1 8,000 20 6,000 4,000 10 8 3,000 6 A 2,000 4 3 2 1,000 800 600 1 .8 400 .6 300 .4 .3 200 .2 100 .1 .08 .06 .04 RMS SYMMETRICAL CURRENTS IN AMPS .03 A–B=ASYMMETRICAL AVAILALBE PEAK (2.3 X SYMM RMS AMPS) .02 B 100,000 .01 80,000 60,000 600 RMS SYMMETRICAL CURRENT IN AMPS 40,000 400 30,000 200 20,000 100 60 Current-Limiting Effects 10,000 50 8,000 40 6,000 30 *Prosp. Let-Through Current (Apparent RMS Symmetrical) S.C.C. JDL Fuse Ratings 20 4,000 15 15A 30A 60A 100A 200A 400A 600A 3,000 1,000 270 470 750 —— — —± 2,000 3,000 370 670 1,130 1,640 2,360 —— 5,000 450 800 1,420 1,910 2,760 4,400 — 1,000 10,000 550 1,000 1,730 2,450 3,520 5,540 8,000 800 15,000 625 1,220 1,890 2,850 4,000 6,420 9,000 600 20,000 700 1,330 2,120 3,090 4,400 7,000 10,000 400 25,000 750 1,440 2,250 3,400 5,000 7,500 11,100 300 30,000 800 1,530 2,370 3,650 5,140 8,000 11,800 A 200 35,000 820 1,600 2,580 3,780 5,430 8,330 12,500 40,000 900 1,640 2,670 4,000 5,640 9,000 13,270 100 50,000 925 1,760 2,790 4,470 6,000 9,380 13,820 60,000 1,000 1,850 3,000 4,670 6,420 10,000 15,000 80,000 1,160 2,000 3,220 5,000 7,400 11,270 16,000 RMS SYMMETRICAL CURRENTS IN AMPS 100,000 1,220 2,150 3,520 5,360 7,950 12,180 17,270 A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) 150,000 1,400 2,460 4,000 6,170 9,000 14,360 19,270 200,000 1,560 2,640 4,450 7,000 10,000 15,820 20,600 *RMS Symmetrical Amps Short-Circuit Current. NOTE: Data derived from Current Limiting Curves. Dimensions Refer to JFL Section on page 21. For additional information, visit www.edisonfuse.com 19 TIME IN SECONDS 1 1A 2 3 4 3A 6 8 5A 10 10A 20 15A 30 20A 40 30A 60 40A 80 50A 100 60A 100A 200 125A 300 200A 400 225A 600 400A 800 1,000 600A 2,000 3,000 4,000 6,000 8,000 10,000 INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS 100 100 200 200 300 300 400 400 600 600 800 800 1,000 1,000 2,000 2,000 3,000 3,000 4,000 4,000 6,000 6,000 8,000 8,000 10,000 10,000 20,000 20,000 30,000 30,000 40,000 40,000 60,000 60,000 80,000 80,000 100,000 100,000 200,000 200,000 AMP AMP RATING RATING JFL Class J Fast-Acting Fuses Catalog Number JFL (1 - 600A) 600Vac or Less Amp Ratings JFL Specifications Fast-Acting JFL 18 30 70 150 350 Voltage Rating: JFL - 600Vac 2 10 35 80 175 400 3 12 40 90 200 450 Amp Rating: 1 - 600A 4 15 45 100 225 500 5 20 50 110 250 600 Interrupting Rating: 200kA RMS Symmetrical Amps 6 25 60 125 300 — Current Limiting: Class J Fuse Edison JFL Class J fuses are among the most current Agency Information: limiting fuses available. Their small physical size and high UL Listed, Class J, Guide JDDZ, File E162363 performance characteristics makes Class J fuses ideal for CSA Certified per C22.2, No. 248.8 any space - limited application. Edison JFL fuses are best suited for the protection of non-inductive loads such as resistive heating, and lighting circuits. Benefits: Recommended Fuse Blocks: • Space saving dimensions vs. Class R. Refer to page 148 in this catalog. • Fast-acting design permits quick response for both overloads and shorts. Recommended Upgrade: • Extremely current-limiting. JDL. Applications: CROSS REFERENCE • Recommended for protection of non-inductive loads, such EDISON MERSEN LITTELFUSE as lighting and resistance heating circuits. JFL A4J JLS • For motor applications, refer to Edison JDL. 20 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section JFL Class J Fast-Acting Fuses JDL Class J Time-Delay Fuses Cat No. JFL and JDL Dimensions - inches Amp Overall Max. Blade Barrel Blade Blade Rating Length Dia. Length Length Thickness Width Mounting Hole Spacing Range ABCD E F G H J K 1-30 2-1/4 13/16 ––––– – – – 35-60 2-3/8 1-1/16 ––––– – – – 70-100 4-5/8 1-1/18 1 2-5/8 1/8 3/4 1/2 3-5/8 3/8 9/32 110-200 5-3/4 1-5/8 1-3/8 3 3/16 1-1/8 11/16 4-3/8 3/8 9/32 225-400 7-1/8 2-1/8 1-7/8 3-3/8 1/4 1-5/8 15/16 5-1/4 17/32 13/32 450-600 8 2-5/8 2-1/8 3-3/4 3/8 21 6 11/16 17/32 Average Time-Current Curve Current Limitation Table* Cat. No. JFL (Amp) JFL Prosp. Fuse Size AMP RATING Short 30 60 100 200 400 600 300 S.C.C. I I I I I I I I I I I I RMS p RMS p RMS p RMS p RMS p RMS p 200 5,000 12 13 24 374 10 5 12 10,00013 24 36 496 13 9 19 15,00013 24 36 4 10 7 15 10 22 100 20,00013 25 37 5 12 8 18 11 25 80 25,00024 36 38 6 13 9 19 12 28 60 30,00024 36 38 6 13 9 20 13 30 40 35,00024 37 49 6 14 9 21 13 30 40,00024 37 49 7 15 10 22 14 32 30 50,00025 38 4 10 7 16 10 23 15 35 20 60,00025 38 5 11 7 17 11 25 16 37 70,00025 38 5 12 8 18 11 25 17 39 80,00025 38 5 12 8 18 12 28 17 39 10 90,00025 49 6 13 9 19 13 29 18 41 8 100,00025 49 6 13 9 19 13 30 18 42 6 150,00025 5 11 6 14 9 21 14 33 22 50 4 200,00036 5 12 7 15 10 22 16 37 24 55 3 2 Peak Let-Through Current Curves** B 1 400,000 .8 300,000 JFL (600Vac) .6 200,000 .4 100,000 .3 80,000 60,000 600 50,000 .2 40,000 400 30,000 200 20,000 .1 100 .08 60 10,000 .06 8,000 6,000 30 .04 5,000 4,000 .03 3,000 A .02 2,000 1,000 .01 RMS SYMMETRICAL CURRENTS IN AMPS A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) RMS SYMMETRICAL CURRENT IN AMPS * "Apparent Let-Through Amps" values are read from "Peak Let-Through Current Curves" and the peak current value divided by 2.3 Asymmetry Factor. ** Curves test data obtained at 15% short-circuit power factor when possible. For additional information, visit www.edisonfuse.com 21 TIME IN SECONDS 40 30A 60 80 60A 100 100A 200 200A 300 400 400A 600 800 600A 1,000 2,000 3,000 4,000 6,000 8,000 10,000 INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS 1,000 2,000 3,000 4,000 5,000 6,000 8,000 10,000 20,000 30,000 40,000 50,000 60,000 80,000 100,000 200,000 AMP RATING TJN (300Vac) Class T Fast-Acting Fuses TJS (600Vac) Class T Fast-Acting Fuses Catalog Number TJN (1 - 1200A) 300Vac or Less Catalog Number TJS (1 - 800A) 600Vac or Less TJN/TJS Specifications Amp Ratings Extremely Fast-Acting TJN 1 30 70 150 350 800 Voltage Rating: TJN - 300Vac, TJS - 600Vac 3 35 80 175 400 1000 6 40 90 200 450 1200 Amp Rating: TJN: 1 - 1200A TJS: 1 - 800A 10 45 100 225 500 — 15 50 110 250 600 — Interrupting Rating: 200kA RMS Symmetrical Amps 20 60 125 300 700 — TJN (15-600) 20kA Amps DC TJS Current Limiting: Class T Fuse 1 25 60 125 300 800 3 30 70 150 350 — Agency Information: 6 35 80 175 400 — UL Listed, Class T, Guide JDDZ,, File E162363 10 40 90 200 450 — CSA Certified per C22.2, No. 248.15, LR700489 15 45 100 225 500 — 20 50 110 250 600 — Self-Certified DC Ratings: Voltage Rating: TJN (15-600) 160Vdc Edison Class T fuses are extremely fast-acting fuses in a TJN (601-1200) 170Vdc compact, space saving size. These fuses are ideal as the main fuse protection for panelboards, load centers and Interrupting Rating: meter stacks. TJN (15-600) 20kA DC TJN (601-1200) 100kA DC Benefits: • No intentional time-delay; opens quickly on overload. Recommended Fuse Blocks: • Extremely current-limiting silver link construction; provides Refer to page 149 in this catalog. superior short-circuit component protection. Recommended Upgrade: Applications: None Available. • Recommended for protection of non-inductive loads, such as lighting and resistance heating circuits. • Use to protect lower interrupting rating circuit breakers CROSS REFERENCE when series rated with Class T fuses. VOLTS EDISON MERSEN LITTELFUSE • For motor protection, size at 300% FLA which provides 300 TJN A3T JLLN short-circuit protection only. 600 TJS A6T JLLS 22 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section TJN (300Vac) Class T Fast-Acting Fuses TJS (600Vac) Class T Fast-Acting Fuses Average Time-Current Curve Peak Let-Through Current Curve Cat. No. TJN (Amp) Cat. No. TJN (Amp) B 400,000 300,000 200,000 100,000 80,000 60,000 1200 800 40,000 600 30,000 400 20,000 200 100 10,000 8,000 60 6,000 30 15 4,000 3,000 2,000 1,000 800 600 400 300 A 200 RMS SYMMETRICAL CURRENTS IN AMPS A-B = ASYMMETRICAL AVAILABLE PEAK (2.3 x SYMM RMS AMPS) TJN Dimensions - in For additional information, visit www.edisonfuse.com 23 INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS 100 200 300 400 600 800 1,000 2,000 3,000 4,000 6,000 8,000 10,000 20,000 30,000 40,000 60,000 80,000 100,000 200,000 AMP RATING TJN (300Vac) Class T Fast-Acting Fuses TJS (600Vac) Class T Fast-Acting Fuses Average Time-Current Curve Peak Let-Through Current Curve Cat. No. TJS (Amp) Cat. No. TJS (Amp) AMP RATING B 400,000 300 300,000 200 200,000 100 80 100,000 60 80,000 40 60,000 800 30 600 40,000 20 30,000 400 20,000 10 8 200 6 100 10,000 4 8,000 60 3 6,000 30 2 4,000 3,000 1 2,000 .8 .6 1,000 .4 800 .3 600 .2 400 .1 300 A .08 200 .06 .04 .03 .02 RMS SYMMETRICAL CURRENTS IN AMPS A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) .01 CURRENT IN AMPS TJS Dimensions - inches 1.5" 3.63" (± 0.04) (± 0.04) Dia. 0.56" 2.72" (± 0.04) 1.73" 1A to 30A 1" (± 0.04) 225A to 400A 0.406" Dia. 0.81" (Typ. 2) 1.00" 3.98" (± 0.04) (± 0.01) (± 0.04) 2.95" 2.95" 1.78" (± 0.04) 1.25" 2.36" (± 0.04) 1.64" 0.484" 450A to 600A 0.75" (Typ. 2) (± 0.04) 4.33" 70A to 100A 0.281" (± 0.04) (Typ. 2) 3.25" 3.17" 1.88" (± 0.04) 2.5" 1.66" 1.75" 0.88" (± 0.04) (± 0.04) 110A to 200A 0.563" 0.344" (Typ. 2) 601A to 800A (Typ. 2) 24 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting TIME IN SECONDS 1 1A 2 3 3A 4 6 5A 8 10 10A 15A 20 30A 30 40 60 60A 80 100 100A 200 200A 300 400 400A 600 800 500A 1,000 800A 2,000 3,000 4,000 6,000 8,000 10,000 INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS 100 200 300 400 600 800 1,000 2,000 3,000 4,000 6,000 8,000 10,000 20,000 30,000 40,000 60,000 80,000 100,000 200,000 AMP RATING Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section SEC Time-Lag Class G Fuses Catalog Number SEC (0.5 - 60A) 600Vac or Less SEC Specifications Amp Ratings Fast-Acting; Time-Delay* SEC 0.5 38 25 45 Voltage Rating: S EC 0.5 to 20    600Vac 14 10 30 50 SEC 25 to 60     480Vac 1.5 5 15 35 60 SEC (30 and 60A only) 300Vdc 26 20 40 — Amp Rating: 0 .5 to 6A (fast-acting), 7 to 60A (time-delay) Dimensions - inches Interrupting Rating: 100kA RMS Symmetrical Amps Amps Ferrule Diameter Length 1 - 15 0.41 1.31 A Current Limiting: Class G Fuse 20 0.41 1.41 (Length) 25 - 30 0.41 1.63 Agency Information: 35 - 60 0.41 2.25 UL Listed, Std. 248-5, Class G, Guide JDDZ, File E162363 CSA Certified, C22.2 No. 248.5, Class 1422-01, File 0.41" (10.41mm) 700489 Self-Certified DC Ratings: Voltage Rating: SEC (0.5-20A) 170Vdc; Interrupting Rating: 10kA Amps DC *Fast-acting/time-delay varies by amp rating Benefits: Recommended Fuse Blocks: • Branch circuit rated for 480Vac. Refer to page 151 in this catalog. • Compact size features varying length rejection feature which helps prevent overfusing. Recommended Upgrade: • Time-delay of 12 sec. min. at 200% rating for amp sizes None Available. 6 through 60. Applications: CROSS REFERENCE • General purpose for use in 120/208 and 277/480 circuits. EDISON MERSEN LITTELFUSE Ideal for fluorescent fixture protection. SEC AG SLC • Light inductive loads including motors, solenoids, etc. (For additional delay, refer to Edison EDCC or JDL). For additional information, visit www.edisonfuse.com 25 SEC Time-Lag Class G Fuses Average Time-Current Curve Cat. No. SEC (Amp) Peak Let-Through Current Curve Cat. No. SEC (Amp) B 10,000 60 8,000 6,000 30 20 4,000 15 3,000 2,000 1,000 800 600 400 300 A 200 100 RMS SYMMETRICAL CURRENTS IN AMPS A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 X SYMM RMS AMPS) 26 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting INSTANTANEOUS PEAK LET-T HROUGH CURR ENT IN AMPS 100 200 300 400 600 800 1,000 2,000 2,000 4,000 6,000 8,000 10,000 20,000 30,000 40,000 60,000 80,000 100,000 AMP RATING Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section EDCC Time-Delay CLASS CC Fuses Catalog Number EDCC (0.5 - 30A) 600Vac or Less EDCC Specifications Amp Ratings Time-Delay EDCC 0.5 1.5 36 12 Voltage Rating: EDCC - 600Vac 0.6 1.6 3.2 6.25 15 0.5-2.5A, 20-30A 300Vdc 0.8 1.8 3.5 7 20 2.8-15A, 150Vdc 12 4 7.5 25 1.125 2.25 4.5 8 30 Amp Rating: 0.5 - 30A 1.25 2.5 59 — 1.4 2.8 5.6 10 — Interrupting Rating: 200kA RMS Symmetrical Amps 20kA DC Dimensions - inches Amps Dimension Length Current Limiting: Class CC Fuse 0.5 - 30 13/32 1-1/2 Agency Information: UL Listed, Class CC, Guide JDDZ, File E162363 Dimensions - in (mm) CSA Certified per C22.2, No. 248.4 Edison EDCC Class CC fuses are extremely current-limiting fuses in a compact size. EDCC fuses are designed specifically for the protection of small horsepower motor circuits. Recommended sizing for most applications is 200% FLA. Refer to time-current curves for specific applications. Benefits: Recommended Fuse Blocks: • Branch circuit rated for 600Vac. Refer to page 151 in this catalog. • Time-delay for motor branch circuit protection. • Excellent current-limiting performance. Recommended Inline Fuse Holders: • Upgrade for standard “midget” fuses. Refer to page 165 in this catalog. Applications: Recommended Panel Mount Holders: • Use for protection of small horsepower motor circuits or Refer to page 168 in this catalog. other circuits requiring small dimension, time-delay fuses. • Can provide Type 2 “No Damage” protection for IEC or Recommended Upgrade: NEMA starters/contactors. None Available. • For control transformer applications, refer to HCTR. CROSS REFERENCE EDISON MERSEN LITTELFUSE EDCC ATDR CCMR For additional information, visit www.edisonfuse.com 27 EDCC Time-Delay Class CC Fuses Time- Current Characteristics Curve Peak Let-Through Current Curve Average Melt EDCC Fuses Cat. No. EDCC Amp AMP RATING 100 10 1 .1 .01 CURRENT IN AMPS Current-Limiting Effects EDCC Fuse Rating Let-Through Current (Apparent RMS Symmetrical) *Prospective Short- Versus Fuse Ratings Circuit Current 1.25A 2.8A 15A 20A 25A 30A 1000 100 135 240 305 380 435 3000 140 210 350 440 575 580 5000 165 255 420 570 690 710 10,000 210 340 540 700 870 1,000 20,000 260 435 680 870 1,090 1,305 30,000 290 525 800 1,030 1,300 1,520 40,000 315 610 870 1,150 1,390 1,700 50,000 340 650 915 1,215 1,520 1,820 60,000 350 735 1,050 1,300 1,650 1,980 80,000 390 785 1,130 1,500 1,780 2,180 100,000 420 830 1,210 1,600 2,000 2,400 200,000 525 1,100 1,600 2,000 2,520 3,050 *RMS Symmetrical amps short-circuit current. NOTE: To calculate I (I ) multiply I value x 2.3. p peak RMS 28 For additional information, visit www.edisonfuse.com Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting TIME IN SECONDS .1 .5 .6 1 .8 1 1.25 3 3.5 4 4.5 6 10 8 10 12 15 20 25 30 100 1000 UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section HCLR Fast-Acting Class CC Fuses HCTR Time-Delay Class CC Fuses Circuit Protection Catalog Number HCLR (0.1 - 30A) Catalog Number HCTR (0.25 - 30A) 600Vac or Less 600Vac or Less Fast-Acting Time-Delay Amp Ratings Amp Ratings 0.25 0.75 1.3 2 3.2 6.25 12 0.1 0.5 2.5 6 12 0.3 0.8 1.4 2.25 3.5 7.5 15 0.125 0.75 37 15 0.4 1 1.5 2.5 48 20 0.2 1 3.5 8 20 0.5 1.125 1.6 2.8 59 25 0.25 1.5 49 25 0.6 1.25 1.8 36 10 30 0.3 25 10 30 Dimensions - inches Dimensions - inches Amps Diameter Length Amps Diameter Length 0.1 - 30 13/32 1-1/2 0.25 - 30 13/32 1-1/2 HCLR Specifications HCTR Specifications Fast-Acting Time-Delay Voltage Rating: HCLR - 600Vac 300Vdc (15-20A) Voltage Rating: HCTR - 600Vac Amp Rating: 0.1 - 30A Amp Rating: 0.25 - 30A Interrupting Rating: 200kA RMS Symmetrical Amps Interrupting Rating: 200kA RMS Symmetrical Amps 20kA DC Current Limiting: Class CC Fuse Current Limiting: Class CC Fuse Agency Information: Agency Information: UL Listed, Class CC, Guide JDDZ, File E162363 UL Listed, Class CC, Guide JDDZ, File E162363 CSA Certified per C22.2, No. 248.4 CSA Certified per C22.2, No. 248.4 Benefits: Benefits: • Branch circuit rated for 600Vac. • Branch circuit rated for 600Vac. • Compact dimensions. • Compact dimensions. • Time-delay design allows closer sizing for inductive loads • Fast-acting design responds quickly to both overload and such as control transformers and solenoids. short-circuit current. Applications: Applications: • Primary protection for control transformers. • Lighting and resistive heating loads. Recommended Fuse Blocks: Recommended Fuse Blocks: Refer to page 152 in this catalog. Refer to page 152 in this catalog. Recommended Inline Fuse Holders: Recommended Inline Fuse Holders: Refer to page 165 in this catalog. Refer to page 165 in this catalog. Recommended Panel Mount Holders: Recommended Panel Mount Holders: Refer to page 168 in this catalog. Refer to page 168 in this catalog. CROSS REFERENCE CROSS REFERENCE EDISON MERSEN LITTELFUSE EDISON MERSEN LITTELFUSE HCTR ATQR KLDR HCLR ATMR KLKR 29 For additional information, visit www.edisonfuse.com HCLR Fast-Acting Class CC Fuses HCTR Time-Delay Class CC Fuses Average Time-Current Curve Cat. No. HCLR (Amp) Fast-Acting Cat. No. HCTR (Amp) Time-Delay AMP RATING 100 80 60 40 30 20 10 8 6 4 3 2 1 .8 .6 .4 .3 .2 .1 .08 .06 .04 .03 .02 .01 RMS SYMMETRICAL CURRENT IN AMPS 30 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting TIME IN SECONDS .4 .6 1/2 .8 1 1 2 3 4 3 6 8 5 10 7-1/2 20 30 40 60 80 100 200 UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Midget Fuses Fast-Acting Catalog No. MCL (0.1 - 30A) Catalog No. MOL (0.5 - 30A) Catalog No. EBS (0.2 - 10A) 600Vac or Less 250Vac or Less 0.2 - 5A 600Vac or Less Fast-Acting Fast-Acting 6 - 10A 250Vac or Less Fast-Acting Amp Ratings Amp Ratings Amp Ratings MCL EBS MOL 0.1 0.75 3.5 9 30 0.2 0.8 1.8 5 10 0.5 2.5 6 10 25 0.12514 10 — 0.4 12 6 — 13 6.25 12 30 0.2 1.5 5 12 — 0.5 1.5 37 — 1.5 48 15 — 0.25 26 15 — 0.75 1.6 48 — 25 9 20 — 0.3 2.5 7 20 — 0.5 38 25 — Dimensions - inches Dimensions - inches Dimensions - inches Amps Diameter Length Amps Diameter Length Amps Diameter Length 0.2 - 10 13/32 1-3/8 0.5 - 30 13/32 1-1/2 0.1 - 30 13/32 1-1/2 MOL Specifications MCL Specifications EBS Specifications Fast-Acting Fast-Acting Fast-Acting Voltage Rating: 0.5-15A, 250Vac Voltage Rating: 600Vac 20-30A, 125Vac Voltage Rating: 0.2-5A, 600Vac 6-10A, 250Vac Amp Rating: 0.1 - 30A Amp Rating: 0.5 - 30A Amp Rating: 0.2 - 10A Interrupting Rating: 100kA RMS Amps Interrupting Rating: 10kA @ 125Vac 2/10-30A Interrupting Rating: 10kA RMS Amps Agency Information: 35A @ 250Vac 0.5-1A (0.1 - 30) UL Listed, Guide File JDYX, 100A@ 250Vac 1.5-6A Agency Information: File E162443 200A@ 250Vac 6.5-10A UL Listed, Guide File JDYX, (0.1 - 30) CSA Cert., LR700489 750A @ 250Vac 12-15A File E162443 200A@ 250Vac 20-30A CSA Cert., LR700489 Benefits: • Compact dimensions. Agency Information: Benefits: • High interrupting rating. (0.5 - 30) UL Listed, Guide File JDYX, • Compact dimensions. • Fast-acting design responds quickly File E162443 • Shorter than standard midget to both overloads and short-circuit (0.5 - 30) CSA Cert., LR700489 dimensions. current. • Economical design. Benefits: Applications: • Compact dimensions. Applications: • Street lighting holders, HID lighting, • Economical laminated paper tube • Supplemental protection for control circuits, electronic equipment design. non-inductive control and lighting protection. circuits. Applications: • Supplemental protection for non- inductive control and lighting circuits. CROSS REFERENCE CROSS REFERENCE CROSS REFERENCE EDISON MERSEN LITTELFUSE EDISON MERSEN LITTELFUSE EDISON MERSEN LITTELFUSE EBS None BLS MCL ATM — MOL OTM BLF Recommended Fuse Blocks: Pages 152 & 169. Recommended Inline Fuse Holders: Page 165. Recommended Panel Mount Holders: Page 168. For additional information, visit www.edisonfuse.com 31 Midget Fuses Fast-Acting Average Time-Current Curve Cat. No. MCL (Amp) Cat. No. MOL (Amp) AMP RATING 100 80 Amp Rating 60 100 50 40 30 20 10 8 6 10 5 4 3 2 1 .8 .6 .5 1 .4 .3 .2 .1 .08 .06 .05 0.1 .04 .03 .02 .01 RMS SYMMETRICAL CURRENT IN AMPS 0.01 Cat. No. EBS (Amp) Current in Amps AMP RATING 100 80 60 50 40 30 20 10 8 6 5 4 3 2 1 .8 .6 .5 .4 .3 .2 .1 .08 .06 .05 .04 .03 .02 .01 RMS SYMMETRICAL CURRENT IN AMPS 32 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting Time in Seconds 0.9 6/10 1 3/4 1 1-1/2 2 2-1/2 3 4 5 6 10 7 8 10 15 20 25 30 100 800 TIME IN SECONDS TIME IN SECONDS 1 1 1A 2 2 3 3 3A 4 4 5 5 4/10A 6 6 8 8 10 10 3/4A 1A 10A 20 20 15A 2A 30 20A 30 40 40 30A 3A 50 50 60 60 6A 80 80 7A 100 100 200 200 300 300 400 400 500 500 600 600 800 800 1,000 1,000 UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Midget Fuses Time-Delay Catalog No. MID (0.1 - 30A) Catalog No. MEQ (0.1 - 30A) Catalog No. MEN (0.1 - 30A) 0.1 - 6A 250Vac or Less 500Vac or Less 250Vac or Less 6 1/4 - 15A 125Vac or Less Time-Delay Time-Delay 20 - 30A 32Vac or Less Pin Indicating - Time-Delay Amp Ratings Amp Ratings MEQ MEN Amp Ratings 0.1 0.6 2.25 5.6 15 0.1 0.8 2 4.5 10 MID 0.125 0.8 2.5 6 20 0.15 1 2.25 5 12 0.1 1 2.25 5.6 15 0.15 13 6.25 25 0.2 1.125 2.5 5.6 15 0.15 1.125 2.5 6 20 0.2 1.125 3.2 7 30 0.25 1.25 2.8 6 20 0.2 1.25 2.8 6.25 25 0.25 1.25 3.5 8— 0.3 1.4 3 6.25 25 0.3 1.4 37 30 0.3 1.5 49 — 0.4 1.5 3.2 7 30 0.4 1.5 3.2 8— 0.4 1.6 4.5 10 — 0.5 1.6 3.5 8— 0.5 1.6 3.5 9— 0.5 25 12 — 0.6 1.8 49 — 0.6 1.8 4 10 — 0.8 25 12 — Dimensions - inches Dimensions - inches Amps Diameter Length Amps Diameter Length Dimensions - inches 0.1 - 30 13/32 1-1/2 0.1 - 30 13/32 1-1/2 Amps Diameter Length 0.1 - 30 13/32 1-1/2 MEQ Specifications MEN Specifications NOTE: 12-30 A is dual-tube construction. Time-Delay Time-Delay MID Specifications Voltage Rating: 500Vac Voltage Rating: 250Vac Pin Indicating — Time-Delay Amp Rating: 0.1 - 30A Amp Rating: 0.5 - 30A Voltage Rating: 0.1 - 0.8A, Interrupting Rating: 10kA RMS Amps Interrupting Rating: 10kA RMS Amps 250Vac Agency Information: @ 125Vac 1 - 15A,125Vac (0.1 - 30) UL Listed, Guide File JDYX, Agency Information: 20 - 30A, 32Vac File E162443 (12-30A) UL Listed, Guide File JDYX, Amp Rating: 0.1 - 30A (0.1 - 30) CSA Cert, LR700489 File E162443 Interrupting Rating: CSA Cert., LR700489 10kA @ 125Vac (1/10-15A) Benefits: 1000A @ 32Vac (20-30A) • Compact dimensions. Benefits: 35A @ 250Vac (1/10-8/10A) • Fiber tube construction. • Compact dimensions. Agency Information: • Time-delay allows harmless • Fiber tube construction. (1-15A) UL Listed, Guide File JDYX, inductive surges to pass without • Dual-element construction allows File E162443 needless fuse opening. harmless inductive surges to pass CSA Cert., LR700489 without opening. Applications: Benefits: • Supplemental protection of Applications: • Compact dimensions. transformers, solenoids, and other • Supplemental protection of small • Silver-plated pin indicates when fuse high inrush circuits. motors, transformers, solenoids, and is opened. Provides positive • For motor applications, refer to EDCC. other high inrush power electronic electrical signal activation. circuits. Applications: • Supplemental protection for high inrush power electronic circuits. CROSS REFERENCE CROSS REFERENCE Recommended Fuse Blocks: EDISON MERSEN LITTELFUSE EDISON MERSEN LITTELFUSE Refer to page 169 in this catalog. MEQ ATQ FLQ MEN TRM FLM CROSS REFERENCE EDISON MERSEN LITTELFUSE Recommended Fuse Blocks: Pages 152 and 169. Recommended Inline Fuse MID GFN FLA Holders: Page 165. Recommended Panel Mount Holders: Page 168. For additional information, visit www.edisonfuse.com 33 Midget Fuses Time-Delay Average Time-Current Curve Cat. No. MEQ (Amp) Cat. No. MEN (Amp) AMP AMP RATING RATING 100 100 80 80 60 50 60 40 30 40 30 20 20 10 8 6 10 5 8 4 3 6 2 4 3 1 .8 2 .6 .5 .4 1 .3 .8 .2 .6 .4 .1 .08 .3 .06 .05 .2 .04 .03 .02 .1 .08 .01 .06 .04 RMS SYMMETRICAL CURRENT IN AMPS .03 Cat. No. MID (Amp) .02 AMP RATING 100 80 .01 60 50 40 RMS SYMMETRICAL CURRENT IN AMPS 30 20 10 8 6 5 4 3 2 1 .8 .6 .5 .4 .3 .2 .1 .08 .06 .05 .04 .03 .02 .01 RMS SYMMETRICAL CURRENT IN AMPS 34 For additional information, visit www.edisonfuse.com 1/2A Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting TIME IN SECONDS .4 .6 1/2 .8 1 1 2 3 4 3 6 8 5 10 7-1/2 20 30 40 60 80 100 200 TIME IN SECONDS TIME IN SECONDS 1 1 1A 2 2 2A 3 3 3A 4 4 5 5 6 5A 6 1/2A 8 8 10 10 10A 1A 20 20 15A 30 30 20A 40 40 50 50 60 60 80 80 100 100 200 200 300 300 400 400 500 500 600 600 800 800 1,000 1,000 UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section KON Class K5 and H One-Time Fuses KOS Class K5 and H One-Time Fuses Catalog Number KON (1 - 600A) 250Vac or Less Catalog Number KOS (1 - 600A) 600Vac or Less KON/KOS Specifications Amp Ratings “One-Time”, Fast-Acting KON 250Vac 17 25 60 125 300 Voltage Rating: KON - 250Vac, KOS - 600Vac 28 30 70 150 350 3 10 35 80 175 400 Amp Rating: 1 - 600A 4 12 40 90 200 450 5 15 45 100 225 500 Interrupting Rating: 6 20 50 110 250 600 KON 1-60A Class K5 50kA RMS Symmetrical Amps KON 70-600A Class H 10kA RMS Symmetrical Amps KOS 600Vac KOS 1-12A Class H 10kA RMS Symmetrical Amps 17 25 60 125 300 KOS 15-60A Class K5 50kA RMS Symmetrical Amps 28 30 70 150 350 KOS 70-600A Class H 10kA RMS Symmetrical Amps 3 10 35 80 175 400 4 12 40 90 200 450 Agency Information: 5 15 45 100 225 500 UL Listed, Class K5, UL248-9, Guide File JDDZ, 6 20 50 110 250 600 File E162363 UL Listed, Class H, UL248-6, Guide File JDDZ, File E162363 Self-Certified DC Ratings: CSA Certified* HRC-K5 per C22.22, No. 248.9, LR700489 Voltage Rating: KON (1-600A) 250Vdc CSA Certified HRC-H per C22.22, No. 248.6, LR700489 KOS (1-30A) 600Vdc KOS (35-60A) 300Vdc *NOTE: KON15 - 60A are not CSA Certified. Refer to PONC KOS (70-600A) 600Vdc for use in CANADA. Interrupting Rating:  10kA DC @ Rated Voltage Benefits: Recommended Fuse Blocks: • Economical, for general purpose use. Refer to pages 144 and 146 in this catalog. Applications: Recommended Upgrade: • Lighting or heating circuits not subject to high levels of ECNR/ECSR or LENRK/LESRK. inrush current. • Circuits having relatively low levels of available CROSS REFERENCE short-circuit current. EDISON MERSEN LITTELFUSE • For motor applications, refer to Edison ECNR/ECSR. KON OT NLN KOS OTS NLS For additional information, visit www.edisonfuse.com 35 KON Class K5 and H One-Time Fuses KOS Class K5 and H One-Time Fuses Dimensions - inches Ferrule Design—1 through 60 Amps Knife Blade—70 through 600 Amps Max. Min. Min. Blade Blade Volts and Overall Diameter Blade Length Barrel Length Thickness Width Catalog Number Amps ABCD E F 1-30 2 9/16 –––– 35-60 3 13/16 –––– KON 70-100 5-7/8 1-1/16 1– 1/8 3/4 250Vac 110-200 7-1/8 1-5/8 1-3/8 4-1/8 3/16 1-1/8 225-400 8-5/8 1-15/16 1-7/8 4-5/8 1/4 1-5/8 450-600 10-3/8 2-5/16 2-1/4 5-3/16 1/4 2 1-30 5 13/16 –––– 35-60 5-1/2 1-1/16 –––– KOS 70-100 7-7/8 1-1/16 1– 1/8 3/4 600Vac 110-200 9-5/8 1-5/8 1-3/8 6-1/8 3/16 1-1/8 225-400 11-5/8 2-3/4 1-7/8 7-1/8 1/4 1-5/8 450-600 13-3/8 3-1/4 2-1/4 8-3/16 1/4 2 Average Time-Current Curve Cat. No. KON (Amp) 250Vac Cat. No. KOS (Amp) 600Vac Amp Amp Rating Rating 300 300 200 200 100 100 80 80 60 60 40 40 30 30 20 20 10 10 8 8 6 6 4 4 3 3 2 2 1 1 .8 .8 .6 .6 .4 .4 .3 .3 .2 .2 .1 .1 .08 .08 .06 .06 .04 .04 .03 .03 .02 .02 .01 .01 RMS Symmetrical Current in Amps RMS Symmetrical Current in Amps 36 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting Time in Seconds 20 15A 30 20A 40 30A 60 35A 80 60A 100 100A 200 200A 300 400 400A 600 800 600A 1,000 2,000 3,000 4,000 6,000 8,000 10,000 Time in Seconds 20 15A 20A 30 30A 40 35A 60 80 60A 100 100A 200 200A 300 400 400A 600 800 600A 1,000 2,000 3,000 4,000 6,000 8,000 10,000 Special Canadian Medium Fuse Blocks, Surge Protective UL/CSA Fuses UL/CSA Fuses Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Current Limiting General Purpose Section “S” and “SL” Rejection Base Plug Fuses Catalog Number S (1/4 - 30A) Catalog Number SL (15 - 30A) 125Vac or Less 125Vac or Less Rejection Base Rejection Base Dual-Element, Time-Delay Time-Delay Amp Ratings Amp Ratings S (Amp) SL (Amp) 1/4 12 3-1/2 6-1/4 14 15 20 25 30 3/10 1-1/8 2-1/4 47 15 4/10 1-1/4 2-1/2 4-1/2 8 20 1/2 1-4/10 2-8/1059 25 6/10 1-6/10 3 5-6/10 10 30 SL Specifications 8/10 1-8/10 3-2/10 6 12 — Time-Delay Voltage Rating: 125Vac S Specifications Dual-Element, Time-Delay Amp Rating: 15 - 30A Voltage Rating: 125Vac Interrupting Rating: 10kA RMS Symmetrical Amps Amp Rating: 1/4 - 30A Agency Information: UL Listed, Guide JEFV, File 12112 Interrupting Rating: 10kA RMS Symmetrical Amps Benefits: Agency Information: • Size rejection feature helps to prevent overfusing. UL Listed, (0 - 6-1/4A) Guide JFHR, File E56412 • Time-delay construction withstands light motor loads. (1 - 30A) Guide JEFV, File 12112 • For upgrade refer to “S” fuse. CSA Certified per C22.2, No. 248.4 CROSS REFERENCE Benefits: EDISON MERSEN LITTELFUSE • Size rejection feature helps to prevent overfusing. SL GSL SLO • Heavy duty dual-element construction. • Superior overload and short-circuit protection. CROSS REFERENCE EDISON MERSEN LITTELFUSE S None SOO For additional information, visit www.edisonfuse.com 37 Edison Base Plug Fuses and Fuse Adapters Catalog Number W (1/2 - 12A) Catalog Number SA (1 - 30A) 125Vac or Less Rejection Base Fuse Adapter Edison Base Fast-Acting Adapter Sizes SA (Amp) 1 2 48 20 Amp Ratings 1-1/4 2-1/2 5 10 30 W (Amp) 1-6/10 3-2/10 6-1/4 15 — 1/2 24 6-1/2 10 1 2-1/2 57 12 Rejection base fuses (Type S and SL) require adapters to 1-8/1036 8 Dummy be used in standard Edison base sockets. Once installed, rejection base adapters accept only rejection base fuses W Specifications which prevents the wrong fuse size from being used. Fast-Acting Agency Information: Voltage Rating: 125Vac UL Listed, File E12853; CSA Certified File #6225-01, File #47235. Amp Rating: 1/2 - 12A ™ Fustat Adapters for Small Motor Protection* Adapter Accepts Fuses Interrupting Rating: 10kA RMS Symmetrical Amps SA-1 S-1 or smaller 1 1 Agency Information: SA-1- ⁄4 S-1- ⁄4 or smaller 6 6 UL Listed, Guide JEFV, File E 12112 SA-1- ⁄10 S-1- ⁄10 or smaller 8 SA-2 S-2 or S-1- ⁄10 Benefits: 1 1 8 SA-2- ⁄2 S-2- ⁄2 to S-1- ⁄10 • General purpose for non-inductive lighting and heating 2 2 8 SA-3- ⁄10 S-3- ⁄10 to S-1- ⁄10 loads. 1 SA-4 S-4 to S-3- ⁄2 • Economical. 1 SA-5 S-5 to S-3- ⁄2 • Edison base threads into non-rejection fuse receptacles. 1 1 1 SA-6- ⁄4 S-6- ⁄4 to S-3- ⁄2 SA-8 S-8 to S-7 Obsoleted W-15 through W-30 plug fuses are replaced with SA-10 S-10 to S-7 T and TL plug fuses. SA-15 S-15 to S-7 SA-20 S-20 Recommended Box Cover Units: SA-30 S-30 to S-20 Refer to page 156 in this catalog. * Both motor running and short-circuit protection. ™ Fustat Adapters for Branch Circuit Protection CROSS REFERENCE Adapter Accepts Fuses EDISON MERSEN LITTELFUSE SA-15 S-15 to S-7 SA-20 S-20 W GW WOO SA-30 S-25 SA 30 S-30 to S-20 CROSS REFERENCE EDISON MERSEN LITTELFUSE SA SAG SAO 38 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section “T” and “TL” Edison Base Plug Fuses Catalog Number T (3/10 - 30A) Catalog Number TL (15 - 30A) 125Vac or Less 125Vac or Less Edison Base Edison Base Dual-Element, Time-Delay Time-Delay Amp Ratings Amp Ratings TL (Amp) T (Amp) 3/10 1-1/8 2-1/4 47 15 15 20 25 30 4/10 1-1/4 2-1/2 4-1/2 8 20 1/2 1-4/10 2-8/1059 25 6/10 1-6/10 3 5-6/10 10 30 8/10 1-8/10 3-2/10 6 12 — TL Specifications 12 3-1/2 6-1/4 14 — Time-Delay Voltage Rating: 125Vac T Specifications Dual-Element, Time-Delay Amp Rating: 15 - 30A Voltage Rating: 125Vac Interrupting Rating: 10kA RMS Symmetrical Amps Amp Rating: 3/10 - 30A Agency Information: UL Listed, Guide JEFV, File 12112 Interrupting Rating: 10kA RMS Symmetrical Amps Benefits: Agency Information: • Time-delay construction withstands light motor loads. UL Listed, Guide JEFV, File E 12112 • Edison base threads into non-rejection fuse receptacles. • For upgrade refer to “T” fuse. Benefits: • Heavy duty dual-element construction for motor circuits. Recommended Box Cover Units: • Edison base threads into non-rejection fuse receptacles. Refer to page 155 in this catalog. • Superior overload and short-circuit protection. CROSS REFERENCE Recommended Box Cover Units: EDISON MERSEN LITTELFUSE Refer to page 155 in this catalog. TL GTL TLO CROSS REFERENCE EDISON MERSEN LITTELFUSE T GT TOO For additional information, visit www.edisonfuse.com 39 “TC” and “P” Edison Base Plug Fuses Catalog Number TC (15 - 30A) Catalog Number P (15 - 30A) 125 Volts AC or Less 125 Volts AC or Less Edison Base Edison Base Dual-Element, Time-Delay Dual-Element, One-Time Amp Ratings Amp Ratings TC (Amp) P (Amp) TC-15PK4 TC-20PK4 TC-25PK4 TC-30PK4 P-15PK4 P-20PK4 P-25PK4 P-30PK4 TC Specifications P Specifications Dual-Element, Time-Delay Dual-Element, One-Time Voltage Rating: 125Vac Voltage Rating: 125Vac Amp Rating: 15 - 30A Amp Rating: 15 - 30A Agency Information: Benefits: CSA Certified (Class 1423-01, File # 53787) • For non-inductive loads. • Edison base threads into non-rejection fuse receptacles. Benefits: • “D” rating for Canadian applications. Recommended Box Cover Units: • Heavy Duty TC fuses are industrial strength products, Refer to page 155 in this catalog. featuring a exclusive Dual-Element construction. • This spring loaded design provides superior short-circuit and overload protection. • The TC fuses have more time-delay than the medium duty fuses in order to better protect industrial motors and optical residential circuits. Recommended Box Cover Units: Refer to page 155 in this catalog. CROSS REFERENCE EDISON MERSEN LITTELFUSE T GT TOO 40 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Small Dimension (Electronic) Fuses 5 x 20mm — IEC Standards S501-V (GDA-V)* (axial leads) S500-V (GDB-V)* (axial leads) S506-V (GDC-V)* (axial leads) S501 (GDA)* S500 (GDB)* S506 (GDC)* Specifications Specifications Specifications Description: Fast- Description: Fast- Description: Time- acting, high-breaking acting, low-breaking delay, low-breaking capacity fuse. capacity fuse. capacity fuse. Construction: Construction: Construction: Glass Ceramic tube, Glass tube, nickel- tube, nickel-plated plated brass endcaps nickel-plated brass brass endcaps. (silver-plated endcaps, 32-125mA). endcaps (silver- Ratings: Ratings: plated endcaps 50mA-400mA). Volts — 250Vac (or less) Volts — 250Vac (or less) Ratings: — 32Vdc (Self Certified) — 32Vdc (Self Certified) Amps — 32mA-15A** Volts — 250Vac (or less) Amps — 32mA-10A IR — 35A @ 250Vac — 32Vdc (Self Certified) IR — See catalog table Amps — 50mA-10A** Agency Information: UR, CSA, Agency Information: CE, cURus, cURus, SEMKO, VDE, BSI, IMQ, IR — 1500A @ 250Vac SEMKO, VDE, BSI, IMQ, CCC. PSE/JET, CCC. Agency Information: CE, cURus, See data sheet for complete agency See data sheet for complete agency SEMKO, VDE, IMQ, CCC, CSA, BSI. information. Not all approvals apply to all information. Not all approvals apply to all See data sheet for complete agency informa- ratings. ratings. tion. Not all approvals apply to all ratings. Features and Benefits Features and Benefits Features and Benefits • Fast-acting for maximum protection, • Fast-acting for maximum protection. • Time-delay compatibility for inductive circuits conforms to IEC 60127-2 (160mA-10A). • High break capacity for use in higher • Conforming to IEC standards fault energy electronic circuitry. Typical Applications Typical Applications • Conforming to IEC standards. • Electronic Circuits • Electronic Circuits Catalog Numbers (Amps) Typical Applications Catalog Numbers (Amps) Catalog IR Max Voltage Catalog Typical Max Voltage • Electronic Circuits 2 Numbers (Amps) I t Drop (mV) 2 Numbers I t Drop (mV) Catalog Numbers (Amps) S500-32-R 35 0.000047 3200 S506-32-R 0.0051 1050 Catalog Typical Voltage S500-40-R 35 0.00011 2500 2 Numbers I t Drop (mV) S506-40-R 0.0072 920 S500-50-R 35 0.00020 2400 S506-50-R 0.0095 800 S501-50-R 0.0017 9000 S500-63-R 35 0.00057 2000 S506-63-R 0.021 760 S501-63-R 0.0005 3300 S500-80-R 35 0.0012 1200 S506-80-R 0.038 580 S501-80-R 0.0011 2600 S500-100-R 35 0.003 1100 S506-100-R 0.045 490 S501-100-R 0.0018 2300 S500-125-R 35 0.005 1000 S506-125-R 0.063 390 S501-125-R 0.0037 1900 S500-160-R 35 0.008 2000 S501-160-R 0.008 1600 S506-160-R 0.093 320 S500-200-R 35 0.016 1700 S501-200-R 0.020 1350 S506-200-R 0.114 340 S500-250-R 35 0.028 1400 S501-250-R 0.027 1300 S506-250-R 0.265 270 S500-315-R 35 0.058 1300 S501-315-R 0.010 1400 S506-315-R 0.621 250 S500-400-R 35 0.018 1100 S501-400-R 0.018 1200 S506-400-R 0.872 210 S500-500-R 35 0.018 220 S501-500-R 0.038 1050 S506-500-R 0.827 140 S501-630-R 0.064 1200 S500-630-R 35 0.035 220 S506-630-R 1.33 150 S501-800-R 0.097 490 S500-800-R 35 0.067 190 S506-800-R 2.78 75 S501-1-R 0.146 330 S500-1-R 35 0.60 200 S506-1-R 6.45 87.5 S501-1.25-R 0.313 297 S500-1.25-R 35 0.84 200 S506-1.25-R 10.05 86 S501-1.6-R 0.748 239 S500-1.6-R 35 1.6 190 S506-1.6-R 21.7 82 S501-2-R 2.0 205 S500-2-R 35 4.2 150 S506-2-R 31.6 77 S501-2.5-R 3.9 190 S500-2.5-R 35 6.1 150 S506-2.5-R 59.4 72.5 S501-3.15-R 8.1 160 S500-3.15-R 35 13 130 S506-3.15-R 96.4 68.5 S501-4-R 14 160 S500-4-R 40 22 130 S501-5-R 25 155 S506-4-R 71.8 67 S500-5-R 50 42 120 S501-6.3-R 48 150 S506-5-R 142.5 60.5 S500-6.3-R 63 69 120 S501-8-R N/A N/A S506-6.3-R 237.6 54 S500-8-R 80 - 120 S501-10-R N/A N/A S506-8-R 255.8 55 S500-10-R 100 —- 120 S506-10-R 450 54 Options S506-12.5-R 1019.5 45 Options S506-15-R 1091.7 65.5 Axial leads, put “V” in P/N. Axial leads, put “V” in P/N, Options * When ordering GDA version, do not *When ordering GDB version, do not add Axial leads, put “V” in P/N. add “-R” suffix to part number. “-R” suffix to part number. *When ordering GDC version, do not add “-R” suffix to part number. **GDC series is not available above 6.3A. For additional information, visit www.edisonfuse.com 41 Small Dimension (Electronic) Fuses 5 x 20mm — N. American Standards GMA-V (axial leads) GMC-V (axial leads) GMD-V (axial leads) GMA GMC GMD Specifications Specifications Specifications Description: Description: Medium Description: Time- Fast-acting fuse. time-delay fuse. delay fuse. Dimensions: Dimensions: 5 x 20mm Dimensions: 5 x 20mm (0.197” x 0.788”). 5 x 20mm (0.197” x 0.788”). (0.197” x 0.788”). Construction: Glass Construction: Construction: Glass tube, nickel-plated brass Glass tube, endcaps. tube, nickel-plated nickel-plated brass endcaps. brass endcaps. Ratings: Ratings: Ratings: Volts — 250Vac (63mA-3.15A) Volts — 250Vac (63mA-2.5A) Volts — 250Vac — 125Vac (3.5-10A) — 125Vac (3.15-15A) — 32Vdc (Self Certified) — 32Vdc (Self Certified) — 32Vdc (Self Certified) Amps — 125mA-4A Amps — 63mA-10A Amps — 63mA-15A IR — 10kA (125mA-3A @ 125Vac, IR — 35A (63mA- 1A @ 250Vac, IR — 35A (63mA- 1A @ 250Vac, p.f. = 0.7-0.8) p.f. = 0.7-0.8) p.f. = 0.7-0.8) — 10kA (4A @ 125Vac, — 10kA (63mA-6A @ 125Vac, p.f. — 10kA (63mA-6A @ 125Vac, p.f. = 1.0) = 0.7-0.8) p.f. = 0.7-0.8) — 35A (125mA-1A @ 250Vac, — 100A (1.25-3.15A @ 250Vac, — 100A (1.25-2.5A @ 250Vac, p.f. = 0.7-0.8) p.f. = 0.7-0.8) p.f. = 0.7-0.8) — 100A (1.2A-3.A @ 250Vac, — 200A (6.3-10A @ 125Vac, p.f. — 200A (7-8A @ 125Vac, p.f. = 1.0) p.f. = 0.7-0.8) = 1.0) — 150A (10-15A @ 125Vac, — 200A (4A @ 250Vac, Agency Information: CE, Std. 248-14, p.f. = 1.0) p.f. = 1.0) UL Listed Guide JDYX, File E19180, Agency Information: CE, Std. Agency Information: CE, UL Listed 0-6.3A, UL Recognized, Guide JDYX2, File E19180, 7-8A, CSA Certified, Class 248-14 UL Listed Guide JDYX, File Guide JDYX, File E19180, 125mA-3A, E19180, 0-6A, UL Recognized, Guide 1422-01, File 53787, 0-6.3A. UL Recognized, Guide JDYX2, File JDYX2, File E19180, 7-15A, CSA E19180, 4A, CSA Certified, Class Features and Benefits Certified, Class 1422-01,File 53787, 0-6. 1422-01, File 53787, 0-4A, PSE/JET. • Conforming to UL standards. File 1641-31003-1001, 1.2A-4A. Features and Benefits Typical Applications • Fast-acting for maximum protection. Features and Benefits • Electronic Circuits • Time-delay compatibility for inductive circuits. Typical Applications • Conforming to UL standards. Catalog Numbers (Amps) • Electronic Circuits With Axial Leads Typical Applications GMC-V-63-R GMC-V-500-R GMC-V-2.5 Catalog Numbers (Amps) GMC-V-80-R GMC-V-600-R GMC-V-3.15 • Electronic Circuits With Axial Leads GMC-V-100-R GMC-V-630-R GMC-V-3.5 GMA-V-63-R GMA-V-800-R GMA-V-4-R GMC-V-125-R GMC-V-750-R GMC-V-4 Catalog Numbers (Amps) GMA-V-100-R GMA-V-1-R GMA-V-5-R GMC-V-150-R GMC-V-800-R GMC-V-5 With Axial Leads GMA-V-125-R GMA-V-1.25-R GMA-V-6-R GMC-V-200-R GMC-V-1-R GMC-V-6 GMD-V-125-R GMD-V-500-R GMD-V-1.5-R GMA-V-200-R GMA-V-1.5-R GMA-V-7-R GMC-V-250-R GMC-V-1.25-R GMC-V-6.3 GMD-V-150-R GMD-V-600-R GMD-V-1.6-R GMA-V-250-R GMA-V-1.6-R GMA-V-8-R GMC-V-300-R GMC-V-1.5-R GMC-V-7 GMD-V-200-R GMD-V-630-R GMD-V-2-R GMA-V-300-R GMA-V-2-R GMA-V-10-R GMC-V-315-R GMC-V-1.6-R GMC-V-8 GMD-V-250-R GMD-V-750-R GMD-V-2.5-R GMA-V-500-R GMA-V-2.5-R GMA-V-15-R GMC-V-400-R GMC-V-2-R GMC-V-10 GMD-V-300-R GMD-V-800-R GMD-V-3-R GMA-V-600-R GMA-V-3.15-R Without Axial Leads GMD-V-315-R GMD-V-1-R GMD-V-4-R GMA-V-750-R GMA-V-3.5-R GMC-63mA GMC-500-R GMC-2.5-R GMD-V-375-R GMD-V-1.2-R Without Axial Leads GMC-80mA GMC-600-R GMC-3.15-R GMD-V-400-R GMD-V-1.25-R GMA-63-R GMA-800-R GMA-4-R GMC-100mA GMC-630-R GMC-3.5-R Without Axial Leads GMA-100-R GMA-1-R GMA-5-R GMC-125mA GMC-750-R GMC-4-R GMD-125-R GMD-500-R GMD-1.5-R GMA-125-R GMA-1.25-R GMA-6-R GMC-150mA GMC-800-R GMC-5-R GMD-150-R GMD-600-R GMD-1.6-R GMA-200-R GMA-1.5-R GMA-7-R GMC-200mA GMC-1-R GMC-6-R GMD-200-R GMD-630-R GMD-2-R GMA-250-R GMA-1.6-R GMA-8-R GMC-250mA GMC-1.25-R GMC-6.3-R GMD-250-R GMD-750-R GMD-2.5-R GMA-300-R GMA-2-R GMA-10-R GMC-300mA GMC-1.5-R GMC-7-R GMD-300-R GMD-800-R GMD-3-R GMA-500-R GMA-2.5-R GMA-15-R GMC-315mA GMC-1.6-R GMC-8-R GMD-315-R GMD-1-R GMD-4-R GMA-600-R GMA-3.15-R GMC-400mA GMC-2-R GMC-10-R GMD-375-R GMD-1.2-R GMA-750-R GMA-3.5-R GMD-400-R GMD-1.25-R CROSS REFERENCE CROSS REFERENCE CROSS REFERENCE EDISON MERSEN LITTELFUSE EDISON MERSEN LITTELFUSE EDISON MERSEN LITTELFUSE GMA GGM 235 GMC GSC None GMD None 239 42 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Small Dimension (Electronic) Fuses 1 1 ⁄4˝ x 1 ⁄4˝ Fast-Acting Fuses AGC (AGC-V axial leads) ABC (ABC-V axial leads) GBB (GBB-V axial leads) Specifications Specifications Specifications Description: Fast-acting fuse. Description: Description: Very Fast-acting fuse. Dimensions: fast-acting fuse. 1 1 1 1 ⁄4˝ x 1 ⁄4˝ (6.4 x 31.7mm). Dimensions: ⁄4˝ x 1 ⁄4˝ Dimensions: Construction: Ceramic tube (6.4 x 31.7mm). 1 1 ⁄4˝ x 1 ⁄4˝ with nickel-plated brass endcaps. Construction: Glass (6.4 x 31.7mm). Ratings: tube with nickel-plated Construction: Volts — 250Vac/125Vdc brass endcaps. 1 * ( ⁄4-15A, 20-30A) Ceramic cartridge with nickel-plated Ratings: — 250Vac (18A) brass endcaps. 1 Volts — 250Vac ( ⁄20-10A) — 32Vdc (Self Certified) Ratings: — 32Vac (12-30A) 1 Amps — ⁄4-30A — 32Vdc (Self Certified) Volts — 250Vac/125Vdc 1 IR** — 35A ( ⁄4-1A @ 250Vac) 1 Amps — 1-30A Amps — ⁄20-30A 1 — 100A (1 ⁄2-3A @ 250Vac) 1 IR — 200A @ 250Vac IR — 35A ( ⁄20-1A @ 250Vac) — 200A (4-10A @ 250Vac) 1 — 100A (1 ⁄4-3A @ 250Vac) — 200A (20-30A @ 125Vac/dc) — 750A (12-15A @ 250Vac) — 200A (4-10A @ 250Vac) — 10,000A (1A -15A @ — 400A (18-20A @ 250Vac) 1 125Vac/dc) 1 — 10kA ( ⁄20-10A @ 125Vac) — 10kA ( ⁄4-15A @ 125Vac) Agency Information: — 1000A (12-30A @ 32Vac) — 1kA (18-30A @ 125Vac) 1 CE, Std. 248-14, UL Recognized, — 10kA ( ⁄4-15, 20A @ 125Vdc) 1-30,125Vdc/250Vac, File E56412, Agency Information: CE, UL Listed, — 400A (25-30A @ 125Vdc) Guide JFHR2, CSA Accepted, 1-30, Guide JDYX, File E19180, 0-10A UL — 200A (25-30A @ 250Vac) 125Vdc/250Vac, File 53787, Class Recognized, Guide JDYX2, File *CSA approvals for 25A and 30A are at 125Vac – IR 1000A and Vdc – IR 400A 1422-30. E19180, 12-30A CSA Certification, (IR 1000A at 75Vdc) 1 Class 1422-01, File 053787, ⁄20-30A. **Interrupting ratings measured at 70% – 80% power factor on AC. The Features and Benefits interrupting ratings for 18A and 20A were measured at 85%-95% power factor Features and Benefits • Very fast-acting performance allows on AC. The interrupting ratings for 25A and 30A were measured at 89% power • Original electronic glass tube fuse. protection of highly sensitive factor on AC. • Fast-acting for maximum protection. electronic circuitry. Agency Information: CE, Std. 248-14 • Wide amp/volt ratings allow versatility UL Listed, Guide JDYX File E19180, Typical Applications of protecting electronic circuits. 1 ⁄4-15A; UL Recognized, Guide JDYX2, • Electronic Circuits Typical Applications File E19180, 18-30A; CSA Certification, Class 1422-01 & 1422-30, File 53787, • Electronic Circuits Catalog Numbers (Amps) 1 ⁄4-30A. With Axial Leads Catalog Numbers (Amps) GBB-V-1-R GBB-V-6-R GBB-V-15-R Features and Benefits With Axial Leads 1 GBB-V-1-⁄4-R GBB-V-7-R GBB-V-20-R • Ceramic body allows for higher 1 1 AGC-V-⁄20-R AGC-V-1- ⁄4-R AGC-V-8-R GBB-V-2-R GBB-V-8-R GBB-V-25-R 1 1 amp/volt rating combinations. AGC-V-⁄10-R AGC-V-1- ⁄2-R AGC-V-9-R GBB-V-3-R GBB-V-9-R GBB-V-30-R 1 AGC-V-⁄8-R AGC-V-2-R AGC-V-10-R Typical Applications 3 1 GBB-V-4-R GBB-V-10-R AGC-V-⁄16-R AGC-V-2- ⁄4-R AGC-V-12-R 2 1 • Electronic Circuits AGC-V-⁄10-R AGC-V-2- ⁄2-R AGC-V-14-R GBB-V-5-R GBB-V-12-R 1 AGC-V-⁄4-R AGC-V-3-R AGC-V-15-R Without Axial Leads 3 Catalog Numbers (Amps) AGC-V-⁄10-R AGC-V-4-R AGC-V-20-R GBB-1-R GBB-6-R GBB-15-R 3 AGC-V-⁄8-R AGC-V-5-R AGC-V-25-R With Axial Leads 1 1 GBB-1-⁄4-R GBB-7-R GBB-20-R AGC-V-⁄2-R AGC-V-6-R AGC-V-30-R 1 ABC-V- ⁄4-R ABC-V-3-R ABC-V-12-R 3 AGC-V-⁄4-R AGC-V-7-R GBB-2-R GBB-8-R GBB-25-R 1 ABC-V- ⁄2-R ABC-V-4-R ABC-V-15-R 1 AGC-V-1-R AGC-V-7- ⁄2-R 3 GBB-3-R GBB-9-R GBB-30-R ABC-V- ⁄4-R ABC-V-5-R ABC-V-18-R Without Axial Leads ABC-V-1-R ABC-V-6-R ABC-V-20-R GBB-4-R GBB-10-R 1 1 1 AGC-⁄20-R AGC-1- ⁄4-R AGC-8-R ABC-V-1- ⁄2-R ABC-V-7-R ABC-V-25-R GBB-5-R GBB-12-R 1 1 AGC-⁄10-R AGC-1- ⁄2-R AGC-9-R ABC-V-2-R ABC-V-8-R ABC-V-30-R 1 1 ABC-V-2- ⁄2-R ABC-V-10-R AGC-⁄8-R AGC-2-R AGC-10-R 3 1 AGC-⁄16-R AGC-2- ⁄4-R AGC-12-R Without Axial Leads 2 1 1 AGC-⁄10-R AGC-2- ⁄2-R AGC-14-R ABC- ⁄4-R ABC-3-R ABC-12-R CROSS REFERENCE 1 1 AGC-⁄4-R AGC-3-R AGC-15-R ABC- ⁄2-R ABC-4-R ABC-15-R EDISON MERSEN LITTELFUSE 3 3 ABC- ⁄4-R ABC-5-R ABC-18-R AGC-⁄10-R AGC-4-R AGC-20-R 3 ABC-1-R ABC-6-R ABC-20-R AGC-⁄8-R AGC-5-R AGC-25-R GBB None 322 1 1 AGC-⁄2-R AGC-6-R AGC-30-R ABC-1- ⁄2-R ABC-7-R ABC-25-R 3 AGC-⁄4-R AGC-7-R ABC-2-R ABC-8-R ABC-30-R 1 1 ABC-2- ⁄2-R ABC-10-R AGC-1-R AGC-7- ⁄2-R CROSS REFERENCE CROSS REFERENCE EDISON MERSEN LITTELFUSE EDISON MERSEN LITTELFUSE ABC GAB 314 AGC GGC 312 For additional information, visit www.edisonfuse.com 43 Small Dimension (Electronic) Fuses 1/4˝ x 1-1/4˝ Time-Delay Fuses MDL-V (axial leads) MDA-V (axial leads) MDL MDA Specifications Specifications Description: Time-delay Description: fuse. 1 1 Time-delay fuse. Dimensions: ⁄4˝ x 1 ⁄4˝ (6.35 x 31.75mm). 1 1 Dimensions: ⁄4˝ x 1 ⁄4˝ Construction: Ceramic (6.4 x 31.7mm). tube with nickel-plated brass endcaps. Construction: Glass Ratings: tube with nickel-plated brass endcaps. Volts — 250Vac (or less) Ratings: — 125Vdc (20A- 30A) 1 — 32Vdc (Self Certified) Volts — 250Vac ( ⁄16-8A) 1 Amps — ⁄4-30A — 32Vac (9-30A) 1 IR** — 35A ( ⁄4-1A @ 250Vac) — 32Vdc (Self Certified) 1 — 100A (1 ⁄2-2A @ 250Vac) 1 1 Amps — ⁄16-30A — 200A (2 ⁄2-10A @ 250Vac) 1 IR* — 35A ( ⁄16-1A @ 250Vac) — 750A (12-15A @ 250Vac) 1 — 1500A (20-30A @ 250Vac) — 100A (1 ⁄4-3A @ 250Vac) 1 — 10kA ( ⁄4-30A @ 125Vac) — 200A (4-8A @ 250Vac) — 10kA (20-30A @ 125Vdc) 1 **Interrupting ratings were measured at 70% – 80% power — 10000A ( ⁄16-8A @ 125Vac) factor on AC, and at a time constant described in UL 248. — 1000A (9-30A @ 32Vac) Agency Information: CE, Std. 248-14, *Interrupting ratings were measured at 70% – 80% power factor on AC, and at a time constant described in UL 198L. UL Listed, Guide JDYX, File E19180, Agency Information: CE, UL Listed, 0-20A CSA Certification, Class 1422-01, 1 File 53787, 0-20A. UL Recognized, Guide JDYX, File E19180, ⁄16-8A; CSA 1 Guide JDYX2, File E19180, 25-30A, Certification Class 1422-01, ⁄16-8A; UL CSA Component Acceptance, Class Recognized, Guide JDYX2, File 1422-30, 25-30A E19180, 9-30A; CSA Component Acceptance, Class 142230, 9-30A. Features and Benefits • Ceramic body allows for higher amp/volt Features and Benefits rating combinations. • Time-delay allows close sizing on • Inventory consolidation by replacing inductive circuits. MDL fuses allows for reduced SKU Typical Applications investment and minimizing potential for • Electronic Circuits misapplying fuse. Catalog Numbers (Amps) Typical Applications • Electronic Circuits With Axial Leads 1 MDL-V- ⁄16-R MDL-V-1-R MDL-V-7-R 1 1 MDL-V- ⁄10-R MDL-V-1- ⁄4-R MDL-V-8-R Catalog Numbers (Amps) 1 1 MDL-V- ⁄8-R MDL-V-1- ⁄2-R MDL-V-9-R With Axial Leads 2 MDL-V- ⁄10-R MDL-V-2-R MDL-V-10-R 1 MDA-V- ⁄4-R MDA-V-3-R MDA-V-12-R 3 1 MDL-V- ⁄16-R MDL-V-2- ⁄4-R MDL-V-12-R 1 MDA-V- ⁄2-R MDA-V-4-R MDA-V-15-R 1 1 MDL-V- ⁄4-R MDL-V-2- ⁄2-R MDL-V-15-R 3 3 MDA-V- ⁄4-R MDA-V-5-R MDA-V-20-R MDL-V- ⁄10-R MDL-V-3-R MDL-V-20-R 3 MDA-V-1-R MDA-V-6-R MDA-V-25-R MDL-V- ⁄8-R MDL-V-4-R MDL-V-25* 1 1 MDL-V- ⁄2-R MDL-V-5-R MDL-V-30* MDA-V-1- ⁄2-R MDA-V-7-R MDA-V-30-R 3 MDL-V- ⁄4-R MDL-V-6-R MDA-V-2-R MDA-V-8-R 1 Without Axial Leads MDA-V-2- ⁄2-R MDA-V-10-R 1 MDL- ⁄16-R MDL-1-R MDL-7-R Without Axial Leads 1 1 MDL- ⁄10-R MDL-1- ⁄4-R MDL-8-R 1 MDA- ⁄4-R MDA-3-R MDA-12-R 1 1 MDL- ⁄8-R MDL-1- ⁄2-R MDL-9-R 1 MDA- ⁄2-R MDA-4-R MDA-15-R 2 MDL- ⁄10-R MDL-2-R MDL-10-R 3 MDA- ⁄4-R MDA-5-R MDA-20-R 3 1 MDL- ⁄16-R MDL-2- ⁄4-R MDL-12-R 1 1 MDA-1-R MDA-6-R MDA-25A-R MDL- ⁄4-R MDL-2- ⁄2-R MDL-15-R 1 3 MDA-1- ⁄2-R MDA-7-R MDA-30A-R MDL- ⁄10-R MDL-3-R MDL-20-R 3 MDL- ⁄8-R MDL-4-R MDL-25* MDA-2-R MDA-8-R 1 1 MDL- ⁄2-R MDL-5-R MDL-30* MDA-2- ⁄2-R MDA-10-R 3 MDL- ⁄4-R MDL-6-R *MDL-25 & MDL-30 are not available in RoHS compliant construction. Recommended Fuse Blocks: Recommended Fuse Blocks: Refer to page 169 in this catalog. Refer to page 169 in this catalog. Recommended Panel Mount Holder: Recommended Panel Mount Holder: Refer to page 168 in this catalog. Refer to page 168 in this catalog. 44 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Small Dimension (Electronic) Fuse Displays CCFSK-45 ERFL Display ERFS Display MFSK-45 (480 Fuses) (200 Fuses) RK5FSK-39 Catalog Number ERFL Display (480 Fuses) Catalog Number ERFS Display (200 Fuses) Features: • Edison display and fuse assortments are compact. They don’t waste space. Display and storage area is minimal. • Slots in the display racks are all labeled for easy inventory and reorder status. MKE Merchandising Kits • Display racks are solidly constructed. Purchase the MKE unit as an empty display, or fully stocked (MKE- C). • Each assortment has the right fuse mix per actual usage. No dead inventory. Features Fuse Assortment consist of the following fuses • Shelves adjust to handle just about any product. (packed in 5-in tins) and a FREE Display Stand. • Heavy-duty casters. • Product part number bin labels available online. ERFL (Large Assortment) • A fuse cross-reference guide . 2 AGC-1 2 AGX-20 1 MDL-35 1 GMA-3A • Flexible header card. 2 AGC-2 1 AGX-30 1 ABC-1 1 GMA-5A 2 AGC-3 2 MDL-1 1 ABC-2 1 GDC-1A Dimensions 1 AGC-4 2 MDL-2 2 ABC-3 1 GDC-2A 1 24” wide x 65” tall x 21 /2” deep. Weight: 48 lbs. when 2 AGC-5 2 MDL-3 2 ABC-5 1 GDC-3.15A empty. 1 AGC-7 1 MDL-4 1 ABC-7 1 GDC-5A 4 AGC-10 2 MDL-5 2 ABC-10 1 GDB-1A 2 AGC-15 1 MDL-7 2 ABC-15 1 GDB-2A 6 AGC-20 2 MDL-10 2 ABC-20 1 GDB-3.15A 2 AGC-25 2 MDL-15 2 ABC-25 1 GDB-5A 7 AGC-30 6 MDL-20 2 ABC-30 — 1 AGC-35 2 MDL-25 1 GMA-1A — 2 AGX-15 7 MDL-30 1 GMA-2A — ERFS (Small Assortment) 2 AGC-1 1 AGC-30 1 MDL-25 1 ABC-25 1 AGC-2 2 MDL-1 1 MDL-30 1 ABC-30 1 AGC-3 1 MDL-2 1 ABC-1 1 GMA-1A 2 AGC-5 1 MDL-3 2 ABC-2 1 GMA-2A 1 AGC-7 2 MDL-5 2 ABC-3 1 GMA-3A 3 AGC-10 1 MDL-7 1 ABC-5 1 GMA-5A 1 AGC-15 2 MDL-10 2 ABC-10 — 1 AGC-20 1 MDL-15 2 ABC-15 — 1 AGC-25 1 MDL-20 2 ABC-20 — For additional information, visit www.edisonfuse.com 45 Automotive Fuses Glass Tube Fuses Blade Fuses SFE Fast-Acting Physical Size: 1/4” diameter x length Specifications as below Cat. No. ATC (1-40A) Description: Fast-acting blade fuse. Agency Information: UL Recognized, Catalog No. Ampere Rating Length (In.) Construction: Plastic housing with (3-40A) (Guide JFHR2, File E56412), SFE-4 4 5/8 zinc fuse element. Zinc ATM blades SAE Standard J1284. SFE-6 6 3/4 are silver-plated. Catalog Numbers (Amps) SFE-7-1/2 7-1/2 7/8 Ratings: SFE-9 9 7/8 Catalog Numbers Color Code SFE-14 14 1-1/16 Volts — 32Vdc ATC-1 Black SFE-20 20 1-1/4 Amps — 2-30A (ATM) ATC-2 Gray SFE-30 30 1-7/16 ATC-3 Violet 1-40A (ATC) ATC-4 Pink Construction: Glass Tube 20-80A (MAX) ATC-5 Tan Voltage Rating: 32V ATC-7 1/2 Brown Agency Information: IR — 1kA ATC-10 Red UL Listed Features and Benefits ATC-15 Blue (Guide #FHXT, File #AU169) ATC-20 Yellow • Color coded for easy identification of ATC-25 Clear fuse ratings ATC-30 Green CROSS REFERENCE Typical Applications ATC-35 Blue-Green NEW OLD • Automotive ATC-40 Orange EDISON EDISON MERSEN LF Catalog Numbers (Amps) SFE —— 307 CROSS REFERENCE NEW OLD Cat. No. ATM (2-30A) EDISON EDISON FERRAZ LF Catalog Numbers (Amps) ATC BTC AF ATO Catalog Numbers Color Code ATM-1 Black ATM-2 Gray Cat. No. MAX (20-80A) ATM-3 Violet ATM-4 Pink Catalog Numbers (Amps) ATM-5 Tan ATM-7 1/2 Brown Catalog Numbers Color Code ATM-10 Red MAX-20 Yellow ATM-15 Blue MAX-25 Grey ATM-20 Yellow MAX-30 Green ATM-25 Clear MAX-35 Brown ATM-30 Green MAX-40 Orange MAX-50 Red MAX-60 Blue CROSS REFERENCE MAX-70 Tan NEW OLD MAX-80 Clear EDISON EDISON FERRAZ LF ATM – AF2 MIN CROSS REFERENCE NEW OLD EDISON EDISON FERRAZ LF MAX – AF3 MAX 46 For additional information, visit www.edisonfuse.com Application Surge Protective Fuse Blocks, Medium Canadian Special UL/CSA Fuses UL/CSA Fuses Section Devices Holders & Misc. Voltage Fuses Fuses & Holders Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Copper Cable Limiters (600Vac) Copper/Aluminum Cable Limiters (250Vac) Catalog Number UCL (25XX – 75XX) 600Vac or Less Catalog Number UCLA 250Vac or Less Catalog AC Volts Copper Number* Rating Cable Size Cable Terminals Available (1) UCL25XX 600 250MCM T = Copper crimp tube (1) UCL35XX 600 350MCM O = Bolt-on blade offset from center (1) UCL50XX 600 500MCM B = Bolt-on blade, centered (1) UCL75XX 600 750MCM (2) UCLA 250 2/0 or 3/0 Bolt-on blade, one end offset from center *Contact Edison Customer Satisfaction for availability, limiters not shown, latest data or information. (1) Choose terminals from "Cable Terminals Available" column to complete catalog number, EXAMPLE: "UCL-25TO" is rated for a "25" 250MCM copper cable and has a "T" tube for crimping and an "O" bolt-on blade, offset from center. Any combination of the three terminals may be selected. (2) A 4/0 aluminum cable may be used with a copper blade-to-aluminum cable connector. Benefits: Cable Limiter Specifications • Cable limiters help to a maintain electrical service by minimizing cable damage due to short circuit currents. Voltage Rating: UCL25XX – 75XX, 600Vac • Isolates faulted cable(s) in multiple cables per phase UCLA, 250Vac installations. • Several cable termination types available. Cable Ratings: 250MCM to 750MCM Cu - 600Vac 2/0 or 3/0 Cu - 250Vac Applications: 4/0 Al - 250Vac (Cu/Al terminal • Residential: 250Vac limiters can be used to protect required) individual service cables tapped from a single transformer. Interrupting Rating: 600V - 200kA RMS • Non-Residential: 600Vac cable limiters should be 250V - 100kA RMS specified to protect parallel service cables in 120/208Vac, 277/480Vac etc. systems. Current Limiting CROSS REFERENCE VOLTS EDISON GOULD LITTELFUSE CROSS REFERENCE 600 UCL50TO CP500C3 LFCL500C3 VOLTS EDISON GOULD LITTELFUSE 600 UCL50BO CP500C5 LFCL500C5 250 UCLA — — 600 UCL50TT CP500C1 LFCL500C1 250 UCLC —— 600 UCL75TO CP750C3 LFCL750C3 600 UCL25TO CP250C3 LFCL250C3 600 UCL75BO CP750C5 LFCL750C5 600 UCL25BO CP250C5 LFCL250C5 600 UCL75TT CP750C1 LFCL750C1 600 UCL25TT CP250C1 LFCL250C1 600 UCL35TO CP350C3 LFCL350C3 600 UCL35BO CP350C5 LFCL350C5 600 UCL35TT CP350C1 LFCL350C1 For additional information, visit www.edisonfuse.com 47 Copper Cable Limiters (600Vac) Copper/Aluminum Cable Limiters (250Vac) Application of Cable Limiters: By industry definition, cable limiters do not provide overload For applications having three or more parallel cables- protection. Class J and Class L fuses for three or more per-phase, cable limiters are installed at each end of each cables-per-phase applications should be considered if cable. For nonparallel or multiple radial cables, limiters may overload protection is a concern. This may also be a successfully be applied at the source end of each cable for desirable consideration for aluminum cable using suitable fault isolation. connectors. When analyzing cable limiter potential applications, it is not Cable limiters applied in utility networks and building power unusual to forget that normal and abnormal current through system main parallel service cables are primarily intended cable limiters is divided just as it is between cables. to isolate faults in multiple-cables-per-phase installations. Selectivity with upstream overcurrent protection devices is This prevents total power outages until maintenance of seldom of concern. When designing for cable limiter fault faulted cable(s) can be scheduled. During the process of isolation to prevent a burn down or unscheduled blackout by opening under fault conditions to isolate faulted cable(s), one faulted cable, it is desirable to determine the continuous limiters current limiting action reduces potential for excess rating load (3 hours or more) that the remaining cables must heat damage to unfaulted cables. handle without overheating. Dimensions - inches Cable Limiters 250V or Less AC H G C A A F B 1 2 D Bolt E E terminal I d de et ta aiill Cat. No. UCLA Catalog Copper Aluminum Symbol Cable Size Cable Size A A BC D E F G H I 1 2 UCLA 2/0AWG 4/0AWG 1.06 (27.0) 1.19 (30.2) 1.44 (36.5) 1.00 (25.4) 0.75 (19.0) 0.12 (3.2) 0.56 (14.3) 0.19 (4.8) 0.59 (15.1) 0.41 (10.3) For additional information, visit www.edisonfuse.com 48 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Copper Cable Limiters (600Vac) Copper/Aluminum Cable Limiters (250Vac) Cable Limiters 600V or Less AC Dimensions are shown in inches.* Tube-Offset Blade (TO)** Copper Catalog Cable Number Size* ABCD E F G H J UCL25TO 250 MCM 1-7/8 1-7/16 3/4 19/32 31/32 1-1/8 UCL35TO 350 MCM 2 3-5/8 3-3/8 1-5/8 7/8 45/64 1-1/16 1/4 UCL50TO 500 MCM 2-7/8 1-7/8 1-1/16 53/64 1-3/16 1-5/8 UCL75TO 750 MCM 3-1/2 3-3/4 3-1/2 2-1/2 1-5/16 1-1/16 1-1/2 2 Center Blade-Offset Blade (BO)** Copper and Catalog Aluminum Number Cable Size* ABCD E F G UCL25BO 250 MCM 1-7/16 31/32 1-1/8 1-1/8 UCL35BO 350 MCM 3-3/8 3-5/8 1-5/8 1-1/16 1/4 UCL50BO 500 MCM 1-7/8 1-1/2 1-5/8 1-3/16 UCL75BO 750 MCM 3-1/2 3-3/4 2-1/2 22 1-1/2 Tube-Tube (TT) C A B A E D Copper Catalog Cable Number Size* ABCD E UCL25TT 250 MCM 1-7/8 1-7/16 3/4 19/32 UCL35TT 350 MCM 2 3-5/8 1-5/8 7/8 45/64 UCL50TT 500 MCM 2-7/8 1-7/8 1-1/16 53/64 UCL75TT 750 MCM 3-1/2 2-7/8 2-1/2 1-5/16 1-1/16 *Limiter terminals are silver plated copper. **Dimensions of "TT", "OO", "TB", etc., terminals are determined by matching appropriate dimensions shown. For additional information, visit www.edisonfuse.com 49 Copper Cable Limiters (600Vac) Copper/Aluminum Cable Limiters (250Vac) Average Time-Current Curve Cat. No. UCL-(XXXX)-600Vac For additional information, visit www.edisonfuse.com 50 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Copper Cable Limiters (600Vac) Copper/Aluminum Cable Limiters (250Vac) Average Time-Current Curve Peak Let-Through Current Curve Cat. No. UCLA and 250V AMP RATING B 100 100,000 80,000 60,000 40,000 30,000 20,000 10 10,000 8,000 6,000 4,000 3,000 A 1 2,000 1,000 RMS SYMMETRICAL CURRENTS IN AMPS A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 x SYMM RMS AMPS) .1 .01 RMS SYMMETRICAL CURRENT IN AMPS For additional information, visit www.edisonfuse.com 51 TIME IN SECONDS 10 100 UCLA 1,000 10,000 INSTANTANEOUS PEAK LET-THRU CURRENTIN AMPS 1,000 2,000 3.000 4,000 6,000 8,000 10,000 20,000 30,000 40,000 60,000 80,000 100,000 200,000 600Vac Capacitor Fuses Cat. No. CCLB(Amps) Cat. No. CCLW(Amps) 600Vac or Less 600Vac or Less AC Interrupting Rating: 200kA AC Interrupting Rating: 200kA With open fuse indicator Without open fuse indicator UL Recognized (80 to 150A) E56412, JFHR2 UL Recognized 80-150A, (E56412, JFHR2) Non-Time Delay Non-Time Delay Amp Ratings Amp Ratings CCLB CCLW 80 150 50 150 100 200 80 — 125 250 100 — Characteristics: Characteristics: • Stud mount with tapped terminals • Stud mount and pressure plate terminals • Isolates faulted capacitor • Isolates faulted capacitor • Size amp rating 250% to 300% of capacitor rated amps • Size amp rating 250% to 300% of capacitor rated amps • Maximum quality assurance • Maximum quality assurance Dimensions - inches Dimensions - inches 3-17/32" 3-13/16" 2-9/32" 1-1/32" 1.0" 1/2" 1/2" 2" 3/16" 13/16" BLOWN POSITION INDICATOR HEX TERMINAL TAPPED 1/2"-13 x 11/16" DEEP 1-1/2" 1" 1/2"-13 3/8"-16 THREADS THREADS 11/16" DEEP 3/4" DEEP For additional information, visit www.edisonfuse.com 52 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 600Vac Capacitor Fuses Average Time-Current Curve Cat. No. CCLB or CCLW (Amp) AMP RATING 300 200 100 80 60 40 30 20 10 8 6 4 3 2 1 .8 .6 .4 .3 .2 .1 .08 .06 .04 .03 .02 .01 RMS SYMMETRICAL CURRENT IN AMPS For additional information, visit www.edisonfuse.com 53 TIME IN SECONDS 10 20 30 40 25 60 80 50 100 75 100 200 150 300 200 400 600 800 1,000 2,000 3,000 4,000 6,000 8,000 10,000 Lift truck & Battery Charger Fuses Catalog Number ACK (15 - 400A), ACL (30 - 100A) and ALS (100 - 500A) Applications: Popular for protection of DC circuits in fork lift trucks and battery chargers. Catalog Dimensions (Inches) Number Type Volts Amps AB C 15, 20, 25, 30 2.500 0.250 0.563 130Vdc 35, 40, 50, 60 3.000 0.344 0.813 ACK Time-Delay 70, 75, 80, 100 3.500 0.313 1.063 72Vdc 120, 140, 150, 175, 200 3.635 0.313 1.063 48Vdc 225, 250, 300, 400 3.875 0.313 1.063 30, 35, 40, 50, 60 Time-Delay ACL 72Vdc 2.500 0.250 0.563 80, 100 Non-Time 130Vdc 100, 120, 140, 150, 175 ALS Delay 200, 225, 250, 300 3.750 0.375 1.063 48Vdc 350, 400, 450, 500 CROSS REFERENCE Dimensions - inches EDISON GOULD LITTELFUSE ACK — CCK C (Dia.) ACL — CCL ALS —— A B For additional information, visit www.edisonfuse.com 54 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Low-Voltage Limiter Non Time-Delay Catalog Number ANL (35 - 750A) Average Time-Current Curve 800Vdc or Less 0.88" (22.2mm) AMP RATING 100 0.34" (8.7mm) 2.44" 3.19" (61.9mm) 10 (81.0mm) 0.88" (22.2mm) 1 0.34" (8.7mm) Amp Ratings ANL 800Vdc .1 35 150 350 40 175 400 50 200 500 60 225 600 80 250 675 100 275 750 125 300 — .01 130 325 — CURRENT IN AMPS ANL Specifications: Non-Time-Delay Voltage Rating: 80Vdc, 125Vac Self Certified Fuse Block 4164 Holes drilled 0.217” diameter with 0.438” counterbore with Interrupting Rating: 2700A@80Vdc 5/16-24 stud with nylon inserted locknuts. 6kA RMS Symmetrical Amps Dimensions - inches Agency Information: UL Recognized, CSA Certified, 35-750A@80Vdc, IR = 2700A, Guide JFHR2, File E56412, Class 1422-30, File 53787, SAE J1171 Recommended Fuse Block: 4164 1.563" 1" 5 -24 16 Characteristics: • Isolates faults in equipment systems such as lift trucks and other battery operated systems. 0.483" • Link element visible through mica window. 3-13/32" 15/16" CROSS REFERENCE EDISON GOULD LITTELFUSE ANL CNL CNL For additional information, visit www.edisonfuse.com 55 TIME IN SECONDS 10 35 100 50 80 100 130 150 200 225 275 325 350 400 500 1000 10,000 Limiter Very Fast-Acting Catalog Number ANN (10 - 800A) Average Time-Current Curve 125Vac or Less AMP 0.88" RATING (22.2mm) 100 0.34" (8.7mm) 2.44" 10 3.19" (61.9mm) (81.0mm) 0.88" (22.2mm) 1 0.34" (8.7mm) Amp Ratings ANN 125Vac 10 125 325 .1 35 150 350 40 175 400 50 200 500 60 225 600 80 250 700 90 275 800 100 300 — .01 ANN Specifications: Very Fast-Acting CURRENT IN AMPS Voltage Rating: 125Vac, 80Vdc Interrupting Rating: 2500@125Vac 2700@80Vdc Agency Information: 35-400A@125Vac, IR=2500A and Fuse Block 4164 500A@80Vdc, IR=2700A: UL Recognized Guide JFHR2, Holes drilled 0.217” diameter with 0.438” counterbore with File E56412; CSA Certified Class 1422-30, File 53787, 5/16-24 stud with nylon inserted locknuts. CE for 35-400A Dimensions - inches Recommended Fuse Block: 4164 Characteristics: • Very fast-acting (high speed of response to short-circuit 1.563" currents. 1" • Link element visible through mica window. 5 16-24 • UL Recognized 35-400A (Guide #JFHR2, File #E56412) 0.483" CROSS REFERENCE EDISON GOULD LITTELFUSE 3-13/32" ANN CNN CNN 15/16" For additional information, visit www.edisonfuse.com 56 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting TIME IN SECONDS 10 35 50 60 100 80 100 125 150 200 250 300 400 500 600 1000 800 10,000 UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section High Speed Fuses Introduction North American Contents General Information Catalog Amp Edison offers a complete range of North American blade Number Volts Range Page and flush-end style fuses and accessories. Their design JHL 600 1-600 59 FWA 130 1000-4000 65-66 and construction were optimized to provide: 2 FWA 150 5-1000 61-64 •  Low energy let-through (I t) FWX 250 1-2500 67-70 •  Low watts loss FWH 500 0.25-1600 71-76 •  Superior cycling capability FWC 600 6-32 77-78 •  Low arc voltage FWP 700 1-1200 79-85 •  Excellent DC performance FWJ 1000 20-2000 86-89 North American style fuses provide an excellent solution North American Fuse Ranges for medium power applications. While there are currently Amps Volts AC DC no published standards for these fuses, the industry has 1000-4000 130 XX standardized on mounting centers that accept Edison 5-1000 150 XX fuses. 1-2500 250 XX 0.25-1600 500 XX Voltage Rating 6-32 600 X X 1-1200 700 XX All Edison North American style fuses are tested at their 20-2000 1000 XX rated voltage. Edison should be consulted for applications exceeding those values. Accessories External and internal open fuse indication is available for selected portions of the North American line. Fuse blocks are available for most applications. For additional information, visit www.edisonfuse.com 57 High Speed Fuses Breaking Capacity Power Dissipation In general, high speed fuses perform well at very high fault The values of watts loss given are related to full rated currents and many products have been successfully tested current with the correct sizes of conductors and natural up to 200kA rms symmetrical. The fuses are essentially for cooling. short-circuit protection and therefore in general, only Time Current Characteristics required to clear faults for melting times less than 30 Individual time current characteristics are subject to a ±10% seconds. tolerance on current and are based on symmetrical Peak Let-Through Current Curves sinusoidal 60Hz currents. High speed fuses are designed Short-circuit coordination of power semiconductors is to clear fault currents associated with pre-arcing times of 2 assessed with the use of I t values. Traditional 30 seconds or less. Dashed lines on time-current supplementary peak let-through current curves are also characteristic curves represent overload conditions which, shown in the catalog. should always be avoided. Arc-Voltage Characteristics Permitted Overloads Applications using modern power semiconductors are not In many applications, surges occur during the normal duty normally sensitive to the peak arc voltages produced by of equipment and under such permitted overloads, the fuse Edison high speed fuses. must not open. Typical values of arc voltages in relation to the rated fuse For permitted overloads lasting longer than a few minutes, voltage, U , are: the fuse current rating should be selected based on the n overload current. The current rating of the fuse should exceed the overload current. System Voltage Arc Voltage of Fuse U 2.0 U n n For infrequent normal overloads, fuse selection can be 0.5 U 1.25 U n n made on the basis of an overload curve of not more than 0.2 U 0.7 U n n 75% of the published time current characteristic. Example: a 500V Edison high speed fuse used on a 250V For highly repetitive overloads, such as in a steel mill system would produce an arc voltage of approximately thyristor drive, fuse selection should be made on the basis 625V. of an overload curve of not more than 60% of the published time current characteristic. 2 I t Characteristics 2 The melting I t of fuses is independent of voltage and reduces to a minimum value for times less than about 1ms. For longer times, reference should be made to the time current characteristics. 2 The total I t values for operating times less than one half- cycle are shown in the data sheets and relate to a fault current of at least 20x rated current, In, with a power factor of 15%. 2 The total I t values reduce considerably at voltages below the rated voltage since the arc interruption is easier. For additional information, visit www.edisonfuse.com 58 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 130V High Speed Fuses Time-Current Characteristic Curves—Average Melt Catalog Symbol: JHL High Speed Fuse Current-Limiting Ampere Rating: 1 to 600A Voltage Rating: 600Vac (or less), 450Vdc (or less) Interrupting Rating: 200kA RMS Sym., 100kA DC Agency Information: UL Listed, Std. 248-8, Class J, Guide JDDZ, File E162363 CSA Certified, C22.2 No. 248.8, Class 1422-02, File 53787 Combine the performance of high speed semiconductor fuses and the convenience of Class J branch circuit fuses in on package. Current Limitation Curves The Edison Drive Fuse will provide maximum protection for ® AC and DC drives and controllers and meet NEC branch circuit protection requirements. General Information: • Easily coordinated with existing and new variable speed drives and electric controllers. • Standard Class J dimensions allowing the use of readily available fuse blocks, holders, and switches. • Allows the lowest let-thru energy of any branch circuit overcurrent protective device. Catalog Numbers (Amps) JHL1 JHL15 JHL70 JHL225 JHL2 JHL20 JHL80 JHL250 JHL3 JHL25 JHL90 JHL300 JHL4 JHL30 JHL100 JHL350 JHL5 JHL35 JHL110 JHL400 JHL6 JHL40 JHL125 JHL450 JHL8 JHL45 JHL150 JHL500 JHL10 JHL50 JHL175 JHL600 JHL12 JHL60 JHL200 For additional information, visit www.edisonfuse.com 59 130V High Speed Fuses Catalog Number JHL 1 –600A Electrical Characteristics Dimensions - in 2 2 2.38˝ 2.25˝ Catalog Rated Current I t (A Sec) @ 600Vac/100kA Watts Number RMS Amps Pre-arc Clearing Loss 0.63˝ 0.50˝ 1.06˝ 0.81˝ JHL-15 15 4 110 4.1 JHL-20 20 8 365 4.0 JHL-25 25 12 610 4.9 1A to 30A 35A to 60A JHL-30 30 20 1000 5.5 4.63" JHL-35 35 55 1100 6.8 (± 0.03) JHL-40 40 90 1900 8.6 3.63" 1.13" 0.75" JHL-50 50 140 2800 8.7 2.63" JHL-60 60 290 6000 8.5 JHL-70 70 450 3100 12 1" 0.43" 0.28" 0.13" JHL-80 80 650 4600 13 70A to 100A JHL-90 90 1010 7200 13 JHL-100 100 1460 10500 13 5.75" JHL-110 110 1710 9500 17 (± 0.03) JHL-125 125 3580 20000 15 4.38" JHL-150 150 5080 28000 19 1.13" 3.0" JHL-175 175 6310 35000 23 0.28" 110A to JHL-200 200 9850 54500 24 1.63" 200A JHL-225 225 11420 51000 29 JHL-250 250 17000 74500 30 0.43" 1.38" 0.19" JHL-300 300 23500 103000 36 JHL-350 350 38800 170000 39 7.13" JHL-400 400 62200 272000 40 (± 0.03) JHL-450 450 44600 270000 56 5.25" JHL-500 500 79500 480000 52 3.38" 0.41" JHL-600 600 138000 830000 57 225A to 1.63" 2.11" 400A 0.58" 1.88" 0.25" 8.0" (± 0.03) 6.0" 3.75" 0.53" 450A to 2" 2.5" 600A 0.74" 2.13" 0.38" For additional information, visit www.edisonfuse.com 60 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 150V High Speed Fuses Catalog Number FWA 5 – 60A Arc Voltage FWA 5-30A (10 x 38mm) U L 35-60A (21 X 51mm) This curve gives the peak arc voltage, U , which may L 300 Specifications appear across the fuse Description: Ferrule style high during its operation as a speed fuses. 200 function of theapplied Dimensions: See dimensions working voltage, E , (rms) g illustration. at a power factor of 15%. 100 Ratings: E g Volts: — 150Vac/dc 50 100 150 Amps: — 5-60A Power Losses 1.0 Kp IR: — 100kA Sym. Watts loss at rated current 0.8 Agency Information: CE, UL Recognition JFHR2.E91958 is given in the electrical 0.6 0.5 characteristics. The curve Electrical 0.4 allows the calculation of Characteristics the power losses at load 0.3 currents lower than the 2 1.5 Total Clearing I t 0.2 K rated current. The 2 1.0 The total clearing I t at correction factor, K , is p rated voltage and at power given as a function of the I b 0.1 factor of 15% are given in RMS load current, I , in % 30 40 50 60 80 90 100% 70 1) b 0.5 the electrical of the rated current. characteristics. For other 2 0.3 Catalog Numbers voltages, the clearing I t is 2) 0.2 found by multiplying by Electrical Characteristics correction factor, K, given 2 2 Eg I t (A Sec) 0.15 as a function of applied Rated 22 70 102 150 Catalog Current Clearing Watts working voltage, E , (rms). 1) 5-30A Range g Numbers Size RMS-Amps Pre-arc at 150V Loss 2) 35-60A Range FWA-5A10F 5 1.6 81 FWA-10A10F 10 3.6 16 2.7 FWA-15A10F 10 x 38mm 15 14 55 3.3 Dimensions - in (mm) 13 1 FWA-20A10F ( ⁄32” x 1 ⁄2”) 20 33 130 3.8 Amp Dimensions FWA-25A10F 25 58 220 4.9 Range AB C FWA-30A10F 30 100 400 4.9 5-30 1.5 (38.1) 0.375 (9.5) 0.406 (10.3) FWA-35A21F 35 75 800 4.5 35-60 2.0 (50.8) 0.625 (15.9) 0.811 (20.6) FWA-40A21F 40 100 1000 5.1 21 x 51mm FWA-45A21F 45 130 1300 6 13 ( ⁄16” x 2”) FWA-50A21F 50 170 1600 7.3 FWA-60A21F 60 250 2400 8.0 A C • Watts loss provided at rated current. Features and Benefits • Excellent cycling capability and DC performance 2 • Low arc voltage and low energy let-through (I t) • Low watts loss in a compact size • Used with finger-safe holders/blocks B Typical Applications • DC Common bus • DC Drives • Power converters/rectifiers • Reduced voltage starters For additional information, visit www.edisonfuse.com 61 150V High Speed Fuses Catalog Number FWA 5 – 60A FWA 5-30A: 150V (10 x 38mm) FWA 35-60A: 150V (21 x 51mm) Time-Current Curve Time-Current Curve 4 4 10 10 6 6 4 4 2 2 3 3 10 10 6 6 4 4 2 2 2 2 10 10 FWA-35A21F 6 6 FWA-40A21F 4 4 FWA-45A21F FWA-50A21F 2 2 FWA-60A21F 1 1 10 10 FWA-5A10F 6 6 FWA-10A10F 4 4 FWA-15A10F FWA-20A10F 2 2 FWA-25A10F 0 0 10 10 FWA-30A10F 6 6 4 4 2 2 –1 –1 10 10 6 6 4 4 2 2 –2 –2 10 10 6 6 4 4 2 2 –3 –3 10 10 6 6 4 4 2 2 –4 –4 10 10 22468 22468 2 4 6 8 1 2 2 4 6 8 2 2 2 4 6 8 3 1 2 3 10 10 10 10 10 10 Prospective Current In Amps RMS Prospective Current In Amps RMS Peak Let-Through Curve Peak Let-Through Curve 4 4 10 10 FWA-60A21F 6 6 FWA-50A21F FWA-45A21F 4 4 FWA-40A21F FWA-35A21F FWA-30A10F 2 2 FWA-25A10F FWA-20A10F 3 FWA-15A10F 10 3 10 6 6 4 4 2 2 FWA-12A10F FWA-10A10F 2 10 FWA-5A10F 2 10 6 6 4 4 2 2 1 10 246 246 246 246 2 1 2 3 4 5 1 10 10 10 10 10 10 246 246 246 246 2 1 2 3 4 5 10 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 62 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Peak Let-Through Current Virtual Pre-Arcing Time In Seconds Peak Let-Through Current Virtual Pre-Arcing Time In Seconds UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 150V High Speed Fuses Catalog Number FWA 70 – 1000A Arc Voltage FWA U L This curve gives the peak Specifications arc voltage, U , which may 300 L Description: North American style appear across the fuse stud-mount fuses. during its operation as a 200 Dimensions: See Dimensions function of the applied illustrations. working voltage, E , (rms) g 100 Ratings: at a power factor of 15%. E Volts:— 150Vac/dc* g Power Losses Amps:— 70-1000A 50 100 150 Watts loss at rated current IR:— 100kA Sym. (70-400A) 1.0 is given in the electrical Kp — 200kA Sym. (450-1000A) 0.8 characteristics. The curve 0.6 — 20kA @150Vdc (70-800A) allows the calculation of the 0.5 — 100kA @ 80Vdc (70-1000A) power losses at load cur- 0.4 *1000A rated @ 80Vdc. rents lower than the rated 0.3 current. The Agency Information: CE, UL Recognized JFHR2.E91958 0.2 correction factor, K , is p Electrical Characteristics given as a function of the 1.5 RMS load current, I , in % 2 K b I b Total Clearing I t 0.1 of the rated current. 1.0 30 40 50 60 80 90 100% 70 2 The total clearing I t at rated Catalog Numbers voltage and at power factor Electrical Characteristics 2 2 of 15% are given in the Rated I t (A Sec) 0.5 1) Catalog Current Clearing Watts electrical characteristics. For Number RMS-Amps Pre-arc at 150V Loss other voltages, the clearing 0.3 FWA-70B 70 470 4000 6.9 2 2) I t is found by multiplying by FWA-80B 80 670 6000 7.7 0.2 correction factor, K, given as FWA-100B 100 1200 12000 9.0 Eg FWA-125B 125 1870 18000 11.2 a function of applied working 0.15 FWA-150B 150 2700 26000 13.5 22 70 102 150 voltage, E , (rms). g FWA-200B 200 4780 45000 17.6 1) 500-1000A Range FWA-250B 250 7470 70000 22.5 2) 70-400A Range FWA-300B 300 10760 100000 27.0 FWA-350B 350 15700 140000 30.6 FWA-400B 400 20300 180000 35.2 FWA-500A 500 39000 120000 35.0 FWA-600A 600 46000 140000 47.0 Dimensions - in FWA-700A 700 75000 220000 49.0 FWA-800A 800 92000 280000 58.0 Fig. 1: 70-400A FWA-1000A 1000 170000 510000 60.0 2.656 • Watts loss provided at rated current. 2.188 1.936 1.156 0.125 Features and Benefits • Excellent DC performance 0.750 0.312 1.000 2 • Low arc voltage and low energy let-through (I t) • Low watts loss 0.438 • Superior cycling capability Typical Applications Fig. 2: 500-1000A • DC Common bus 3.500 • DC Drives 2.438 • Power converters/rectifiers 1.250 0.250 • Reduced voltage starters 1.000 1.500 0.406 1mm = 0.0394” / 1” = 25.4mm For additional information, visit www.edisonfuse.com 63 150V High Speed Fuses Catalog Number FWA 70 – 1000A Time-Current Curve 4 10 6 4 2 3 10 6 FWA-500A 4 FWA-600A 2 FWA-700A FWA-800A 2 10 FWA-1000A 6 4 2 1 10 6 4 2 0 10 6 4 2 –1 10 FWA-70A 6 4 FWA-80A FWA-100A 2 FWA-125A FWA-150A –2 10 6 4 2 –3 10 FWA-200A 6 FWA-250A 4 FWA-300A 2 FWA-350A FWA-400A –4 10 2468 2468 2 3 4 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve 6 10 6 4 FWA-400A FWA-350A 2 FWA-300A FWA-250A 4 10 FWA-200A FWA-150A 6 FWA-100A 4 2 3 10 6 FWA-80A FWA-70A 4 2 2 10 24 6 24 6 24 6 2 2 3 4 5 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 64 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Virtual Pre-Arcing Time In Seconds Peak Let-Through Current UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 130V High Speed Fuses Catalog Number FWA 1000 – 4000A Arc Voltage FWA U L This curve gives the peak Specifications arc voltage, U , which L Description: North American 300 may appear across the style flush-end high speed fuses. fuse during its operation Dimensions: See Dimensions 200 as a function of the illustrations. applied working voltage, Ratings: E , (rms) at a power 100 g Volts: — 130Vac factor of 15%. E g Amps: — 1000-4000A Power Losses 50 100 150 IR: — 200kA RMS Sym. Watts loss at rated current — 50kA @130Vdc 1.0 is given in the electrical Kp Agency Information: CE, UL Recognized JFHR2.E91958 0.8 characteristics. The curve on 1000-2000A fuses 0.6 allows the calculation of 0.5 the power losses at load Electrical Characteristics 0.4 currents lower than the 0.3 2 Total Clearing I t rated current. The correction factor, K , is 1.5 0.2 2 p The total clearing I t at K given as a function of the rated voltage and at power 1.0 RMS load current, I , in % b factor of 15% are given in I b of the rated current. 0.1 the electrical 30 40 50 60 80 90 100% 70 characteristics. For other 0.5 Catalog Numbers 2 Electrical Characteristics voltages, the clearing I t is 2 2 I t (A Sec) found by multiplying by 0.3 Catalog Rated Current Clearing Watts correction factor, K, given 0.2 Numbers RMS-Amps Pre-arc at 130V Loss as a function of applied FWA-1000AH 1000 170000 460000 60 Eg 0.15 working voltage, E , (rms). g FWA-1200AH 1200 270000 730000 70 26 65 104 130 FWA-1500AH 1500 520000 1400000 78 FWA-2000AH 2000 860000 2400000 108 FWA-2500AH 2500 1500000 4100000 130 FWA-3000AH 3000 2100000 5700000 150 FWA-4000AH 4000 3400000 9200000 257 • Watts loss provided at rated current. Dimensions - in Catalog Number Fig.BC D Thread Depth 3 1 FWA-1000AH-2000AH 1 2.0 1.0 — Tapped ⁄8”-24 x ⁄2” Features and Benefits 1 1 FWA-2500AH-3000AH 1 3.0 1.5 — Tapped ⁄2”-20 x ⁄2” • Excellent DC performance 1 1 FWA-4000AH 2 3.5 1.5 1.5 Tapped ⁄2”-20 x ⁄2” 2 • Low arc voltage and low energy let-through (I t) 1mm = 0.0394˝ / 1˝ = 25.4mm • Low watts loss Fig. 1: 1000-3000A Fig. 2: 4000A • Superior cycling capability Typical Applications • DC Common bus 1.875 • DC Drives 1.875 • Power converters/rectifiers • Reduced voltage starters D B C B C For additional information, visit www.edisonfuse.com 65 130V High Speed Fuses Catalog Number FWA 1000 – 4000A Time-Current Curve 4 10 6 4 2 3 10 6 FWA-1000AH 4 FWA-1200AH 2 FWA-1500AH FWA-2000AH 2 10 FWA-2500AH 6 FWA-3000AH 4 FWA-4000AH 2 1 10 6 4 2 0 10 6 4 2 –1 10 6 4 2 –2 10 6 4 2 –3 10 6 4 2 –4 10 24 2 68 24 2 68 3 4 5 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve 2 5 10 6 4 2 FWA-4000AH FWA-3000AH 4 FWA-2500AH 10 FWA-2000AH FWA-1500AH 6 FWA-1200AH FWA-1000AH 4 2 3 10 3 24 6 4 24 6 5 2 4 6 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 66 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Virtual Pre-Arcing Time In Seconds Peak Let-Through Current UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 250V High Speed Fuses Catalog Number FWX 1 – 50A Arc Voltage 1.4 FWX (14 x 51mm) U 1.2 L This curve gives the 3 Specifications 10 peak arc voltage, U , L Description: Ferrule style high 800 which may appear speed fuses. across the fuse during 600 Dimensions: See dimensions its operation as a 500 illustration. function of the applied 400 1) Ratings: working voltage, E , g 300 Volts: — 250Vac/dc (rms) at a power factor 2) E g of 15%. Amps: — 1-50A 200 50100 150 200 250 IR: — 200kA RMS Sym. Power Losses — 50kA @ 250Vdc 1.0 Kp Watts loss at rated current 0.8 Agency Information: CE, UL Recognition JFHR2.E91958 is given in the electrical 0.6 1-50A & CSA Component Acceptance file Class 1422-30, characteristics. The curve 0.5 1422-90 (53787) 5-30A allows the calculation of 0.4 the power losses at load Electrical 0.3 currents lower than the 1.5 Characteristics K 0.2 rated current. The 1.0 2 correction factor, K , is Total Clearing I t p given as a function of the I 2 b 0.1 The total clearing I t at RMS load current, I , in % 1) b 30 40 50 60 70 80 90 100% 0.5 rated voltage and at power of the rated current. factor of 15% are given in 2) Catalog Numbers the electrical 0.3 Electrical Characteristics 0.2 characteristics. For other 2 2 Rated I t (A Sec) 2 voltages, the clearing I t is Catalog Current Clearing Watts Eg 0.15 found by multiplying by Number Size RMS-Amps Pre-arc at 250V Loss 75 125 200 250 300 FWX-1A14F 1— — — correction factor, K, given FWX-2A14F 2— — — as a function of applied FWX-3A14F 3— — — working voltage, E , (rms). FWX-4A14F 4— — — g FWX-5A14F 14 x 51mm 5 1.6 13 1.3 9 FWX-10A14F ( ⁄16” x 2”) 10 3.6 24 3.4 FWX-15A14F 15 14 83 3.8 FWX-20A14F 20 33 200 4.6 Dimensions - mm (in) FWX-25A14F 25 58 300 5.3 FWX-30A14F 30 100 500 5.9 FWX-50A14F 50 200 1800 5.7 50.8 14.3 • Watts loss provided at rated current. (2.000") (0.563") • (250Vdc/Interrupting rating 50kA) UL Recognition & CSA Component Acceptance on 5 through 30A only. Consult Edison for additional ratings. Features and Benefits • Excellent cycling capability and DC performance 2 • Low arc voltage and low energy let-through (I t) • Low watts loss in a compact size 15.5 (0.610") • Used with finger-safe holders/blocks Typical Applications • DC Common bus • DC Drives • Power converters/rectifiers • Reduced voltage starters For additional information, visit www.edisonfuse.com 67 250V High Speed Fuses Catalog Number FWX 1 – 50A FWX 1-30A: 250V (14 x 51mm) Time-Current Curve Prospective Current In Amps RMS Peak Let-Through Curve Prospective Current In Amps RMS For additional information, visit www.edisonfuse.com 68 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 250V High Speed Fuses Catalog Number FWX 35 – 2500A Arc Voltage FWX 1.4 U 1.2 L This curve gives the peak 3 Specifications 10 arc voltage, U , which may L Description: North American 800 appear across the fuse style stud-mount and flush-end 600 during its operation as a fuses. 500 function of the applied Dimensions: See Dimensions working voltage, E , (rms) 400 g 1) illustrations. at a power factor of 15%. 300 Ratings: 2) E g Power Losses Volts:— 250Vac/dc 200 Watts loss at rated current is 50100 150 200 250 Amps:— 35-2500A 1) 35-800A Range given in the electrical char 2) 1000-2500A Range IR:— 200kA RMS Sym. 1.0 acteristics. The curve allows Kp 50kA@250Vdc (35-800A) 0.8 the calculation of the power Agency Information: CE, UL Recognized JFHR2.E56412 0.6 losses at load currents lower 0.5 & CSA Component Acceptance file Class 1422-30, (53787) than the rated current. The 0.4 on 35-800A fuses (50kA IR @250Vdc). 0.3 correction factor, K , is p given as a function of the Electrical 0.2 1.5 Characteristics RMS load current, I , in % K b 1.0 of the rated current. 2 I Total Clearing I t b 0.1 30 40 50 60 70 80 90 100% 2 Catalog Numbers The total clearing I t at rated Electrical Characteristics 1) voltage and at power factor 0.5 2 2 Rated I t (A Sec) of 15% are given in the Catalog Current Clearing Watts 2) Number RMS-Amps Pre-arc at 250V Loss electrical characteristics. 0.3 FWX-35A 35 50 230 4.2 0.2 For other voltages, the FWX-40A 40 60 310 5.2 2 clearing I t is found by FWX-45A 45 80 390 5.7 Eg 0.15 FWX-50A 50 100 520 6.0 multiplying by correction 75 125 200 250 300 FWX-60A 60 140 740 8.1 factor, K, given as a FWX-70A 70 330 1400 7.2 1) 35-800A Range function of applied working 2) 1000-2500A Range FWX-80A 80 430 1850 8.1 FWX-90A 90 570 2450 9.0 voltage, E , (rms). g FWX-100A 100 740 3150 10.0 FWX-125A 125 1130 4850 12.5 FWX-150A 150 1620 6950 15.7 Dimensions - in Tapped FWX-175A 175 2170 9300 18.5 Amp Thread FWX-200A 200 2790 12000 22 Range Fig.AB C D E F G H J Depth FWX-225A 225 3210 14700 24 35-60 1 3.19 0.81 1.59 2.59 2.25 0.34 0.63 0.13 0.52 — FWX-250A 250 3960 18100 27 70-200 1 3.13 1.22 1.59 2.44 2.19 0.34 1.00 0.19 0.47 — FWX-275A 275 4720 21600 31 225-600 1 3.84 1.50 1.59 2.94 2.25 0.41 1.00 0.25 0.75 — FWX-300A 300 6000 27300 32 700-800 1 3.84 2.00 1.59 3.03 2.28 0.41 1.50 0.25 0.78 — FWX-350A 350 10600 48600 39 3 1 1000-1200 2 2.59 3.00 1.50—— — — — — ⁄8”-24 x ⁄2” FWX-400A 400 14500 66100 44 3 1 1500-2500 3 2.59 3.50 1.50 1.50—— — — — ⁄8”--24 x ⁄2” FWX-450A 450 22100 101000 49 1mm = 0.0394” / 1” = 25.4mm FWX-500A 500 28000 128000 54 FWX-600A 600 41100 188000 62 Fig. 1: Fig. 2: Fig. 3: FWX-700A 700 48800 190000 72 FWX-800A 800 59000 230000 84 35-800A 1000-1200A 1500-2500A FWX-1000AH 1000 44000 360000 100 FWX-1200AH 1200 92000 750000 103 J A FWX-1500AH 1500 120000 880000 140 A FWX-1600AH 1600 160000 1200000 140 FWX-2000AH 2000 320000 2300000 151 FWX-2500AH 2500 670000 4700000 163 ADC E D • Watts loss provided at rated current. C Typical Applications B Features and Benefits C B • DC Common bus • Excellent DC performance • DC Drives F • Low arc voltage and low G 2 • Power converters/rectifiers energy let-through (I t) • Reduced voltage starters • Superior cycling capability H B For additional information, visit www.edisonfuse.com 69 250V High Speed Fuses Catalog Number FWX 35 – 2500A FWX 35-800A: 250V FWX 1000-2500A(H): 250V Time-Current Curve Time-Current Curve 4 4 10 10 6 4 2 3 10 3 10 FWX-200A 6 FWX-350A 2 10 4 FXW-400A FWX-500A FWX-600A 2 FWX-1000AH FWX-800A 2 FWX-1200AH 10 1 10 FWX-1500AH 6 FWX-1600AH 4 FWX-2000AH 0 10 2 FWX-2500AH 1 10 FWX-35A 6 FWX-40A –1 10 4 FWX-60A FWX-70A FWX-100A 2 FWX-150A 0 –2 10 10 6 4 –3 10 2 –1 10 6 –4 10 4 2 3 4 2 10 10 10 Prospective Current In Amps RMS 2 –2 10 6 4 Peak Let-Through Curve 2 5 10 –3 10 B 6 4 2 FWX-800A FWX-600A –4 10 FWX-400A 24 2 68 22468 3 4 5 FWX-300A 10 10 10 FWX-200A Prospective Current In Amps RMS 4 10 Peak Let-Through Curve 5 10 6 FWX-2500AH 4 FWX-2000AH 3 10 FWX-1600AH FWX-150A FWX-1500AH FWX-100A FWX-1200AH 2 FWX-70A FWX-1000AH FWX-60A FWX-45A A FWX-35A 4 10 6 4 2 10 2 3 4 5 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS 2 3 10 24 6 24 6 24 6 3 4 5 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 70 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Virtual Pre-arcing Time In Seconds Peak Let-Through Current Peak Let-Through Current Virtual Pre-Arcing Time In Seconds UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 500V High Speed Fuses Catalog Number FWH 0.25 – 30A Catalog Numbers FWH (6 x 32mm) Electrical Characteristics 2 2 Specifications Rated I t (A Sec) Catalog Current Clearing Watts Description: Ferrule style high speed fuses. Numbers Size RMS-Amps Pre-arc at 500V Loss Dimensions: See dimensions illustrations. FWH-.250A6F 0.25* 0.01 0.05 2.7 FWH-.500A6F 0.5* 0.05 0.25 1.2 Ratings: FWH-001A6F 1* 0.4 2 1.7 Volts: — 0.25-1A 500Vac FWH-002A6F 2* 1.3 3.5 3.2 FWH-3.15A6F 3.15* 3.1 7.7 2.9 2-5A 500Vac/600Vdc FWH-005A6F 5* 15 40 2.1 6.3-7A 500Vac FWH-6.30A6F 6 x 32mm 6.3* 36 90 2.3 1 1 10-20A 600Vac FWH-007A6F ( ⁄4” x 1 ⁄4”) 7* 50 125 2.5 25-30A 500Vac FWH-010A6F 10** 9.9 139 2.86 FWH-12.5A6F 12.5** 20 60 3.53 FWH-015A6F 15** 44 146 3.08 Amps: — 0.25-30A FWH-016A6F 16** 48 177 4.48 FWH-020A6F 20** 75 259 4.26 IR: — 50kA at ≥ 20% pf (0.25-20A) FWH-025A6F 25** 126 345 — — 20kA at ≥ 20% pf (25-30A) FWH-030A6F 30** 145 430 — *300% minimum opening current at rated voltage. Agency Information: CE, UL Recognition JFHR2.E91958 **200% minimum opening current at rated voltage. • Consult Edison for DC ratings. 0.25-30A, CSA Component Acceptance file Class 1422-30, 1422-90 (53787) 0.25-7A Opening Times Features and Benefits • Excellent cycling capability and DC performance Amp Ratings 150% 200% 300% 2 0.25-7 > 30 min < 30 min ≤ 10 sec • Low arc voltage and low energy let-through (I t) 10-30 < 30 min < 30 min ≤ 10 sec • Low watts loss in a compact size Dimensions - mm (inches) • Used with finger-safe holders/blocks 31.8 6.4 Typical Applications (1.25") (0.25") • DC Common bus • DC Drives • Power converters/rectifiers • Reduced voltage starters 3.2 (0.125") For additional information, visit www.edisonfuse.com 71 500V High Speed Fuses Catalog Number FWH 0.25 – 30A FWH 0.25-7A: 500V (6 x 32mm) FWH 10-30A: 500V (6 x 32mm) Time-Current Curve Time-Current Curve 4 10 6 4 FWH-002A6F FWH-3.15A6F 2 FWH-005A6F 3 10 FWH-6.30A6F FWH-007A6F 6 4 2 2 10 6 4 2 1 10 6 4 2 0 10 6 4 2 –1 10 FWH-.250A6F 6 FWH-.500A6F 4 FWH-001A6F 2 –2 10 –3 4x10 .2 .4 .6 .8 0 224 68 1 24 2 68 2 2 10 10 10 Prospective Current In Amps RMS For additional information, visit www.edisonfuse.com 72 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Virtual Pre-Arcing Time In Seconds UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 500V High Speed Fuses Catalog Number FWH 1 – 30A Arc Voltage 2.0 FWH (14 x 51mm) U L 1.6 This curve gives the peak Specifications arc voltage, U , which may 1.2 L Description: Ferrule style high 3 appear across the fuse 10 speed fuses. during its operation as a 800 Dimensions: See Dimensions function of the applied illustration. 600 working voltage, E , (rms) g 500 Ratings: at a power factor of 15%. 400 Volts: — 500Vac E g Power Losses 300 Amps: — 1-30A 100 200 300 400 500 Watts loss at rated current is IR: — 200kA RMS Sym. 1.0 Kp given in the electrical char- 0.8 — 50kA @500Vdc acteristics. The curve allows 0.6 Agency Information: CE, UL Recognition 1- 30A & CSA 0.5 the calculation of the power Component Acceptance file Class 1422-30, (53787) on: 0.4 losses at load 5 - 30A. 0.3 currents lower than the rated current. The correction 0.2 Electrical Characteristics factor, K , is given as a p function of the RMS load 2 Total Clearing I t I 1.5 b current, I , in % of the rated 0.1 b K 2 30 40 50 60 80 90 100% The total clearing I t at rated 70 current. 1.0 voltage and at power factor Catalog Numbers of 15% are given in the Electrical Characteristics electrical characteristics. For 2 2 Rated I t (A Sec) 0.5 2 other voltages, the clearing I t Catalog Current Clearing Watts Numbers Size RMS-Amps Pre-arc at 500V Loss is found by multiplying by 0.3 FWH-1A14F 1— — — correction factor, K, given as FWH-2A14F 2— — — 0.2 a function of applied working FWH-3A14F 3— — 2.3 FWH-4A14F 4— — — Eg voltage, E , (rms). g 0.15 FWH-5A14F 5 1.6 6.4 1.5 100 250 400 500 FWH-6A14F 14 x 51mm 6 1.6 6.4 1.5 9 FWH-10A14F ( ⁄16” x 2”) 10 3.6 13 4 FWH-12A14F 12 —— — FWH-15A14F 15 10 40 5.5 FWH-20A14F 20 26 96 6 FWH-25A14F 25 49 191 7 FWH-30A14F 30 58 232 9 • Watts loss provided at rated current. Dimensions - mm (inches) 50.8 14.3 Features and Benefits (2.000") (0.563") • Excellent cycling capability and DC performance 2 • Low arc voltage and low energy let-through (I t) • Low watts loss in a compact size • Used with finger-safe holders/blocks 15.5 Typical Applications (0.610") • DC common bus • DC drives • Power converters/rectifiers • Reduced voltage starters For additional information, visit www.edisonfuse.com 73 600V High Speed Fuses Catalog Number FWH 1 – 30A FWH 1-30A: 500V (14 x 51mm) Time-Current Curve 4 10 6 4 2 3 10 6 4 2 2 10 FWH-5A14F 6 FWH-10A14F 4 FWH-15A14F FWH-20A14F 2 FWH-25A14F 1 10 FWH-30A14F 6 4 2 0 10 6 4 2 –1 10 6 4 2 –2 10 6 4 2 –3 10 6 4 2 –4 10 24 68 22468 22468 1 2 3 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve 4 10 6 4 2 FWH-30A14F FWH-25A14F 3 10 6 4 2 FWH-20A14F FWH-15A14F 2 10 FWH-10A14F FWH-5A14F 6 4 2 1 10 246 246 246 246 2 1 2 3 4 5 10 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 74 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Peak Let-Through Current Virtual Pre-Arcing Time In Seconds UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 500V High Speed Fuses Catalog Number FWH 35 – 1600A Arc Voltage 2.0 FWH U L 1.6 This curve gives the peak Specifications arc voltage, U , which 1.2 L Description: North American style 3 may appear across the 10 stud-mount fuses. fuse during its operation 800 Dimensions: See Dimensions as a function of theapplied illustration. 600 2) working voltage, E , (rms) g 500 Ratings: at a power 1) 400 Volts: — 500Vac/dc (35-800A only) factor of 15%. E g 300 Amps: — 35-1600A 100 200 300 400 500 Power Losses IR: — 200kA Sym. 1) 35-200 & 1000-1600A Range 2) 225-800A Range Watts loss at rated — 50kA @ 500Vdc (35-800A) 1.0 current is given in the Kp 0.8 Agency Information: CE, UL Recognition JFHR2.E91958 electrical characteristics. 0.6 FWH-_B (35-200A, 1000-1200A), JFHR2.E56412 The curve allows the 0.5 FWH-_A (225-600A), CSA Component Acceptance Class calculation of the power 0.4 1422-30, File 53787 (35-1600A). losses at load currents 0.3 lower than the rated Electrical Characteristics current. The correction 0.2 1.5 2 Total Clearing I t factor, K , is given as a K p 2 function of the RMS load 1.0 The total clearing I t at rated I b 0.1 current, Ib, in % of the voltage and at power factor of 30 40 50 60 70 80 90 100% rated current. 15% are given in the electrical 0.5 characteristics. For other Catalog Numbers 2 voltages, the clearing I t is 1) Electrical Characteristics 2 2 0.3 Rated I t (A Sec) found by multiplying by Catalog Current Clearing Watts 0.2 correction factor, K, given as a 2) Numbers RMS-Amps Pre-arc at 500V Loss function of applied working Eg FWH-35B 35 34 150 8 0.15 FWH-40B 40 76 320 7.5 voltage, E , (rms). 100 250 400 500 g FWH-45B 45 105 450 7.5 1) 35-800A Range FWH-50B 50 135 670 7.5 2) 1000-1600A Range FWH-60B 60 210 900 9.9 FWH-70B 70 210 900 10.6 Dimensions - in FWH-80B 80 305 1400 12.7 Amp FWH-90B 90 360 1600 15 Range Fig.AB C D E F G H J FWH-100B 100 475 2000 17 35-60 1 3.188 0.813 1.593 2.541 2.193 0.344 0.719 0.125 0.518 FWH-125B 125 800 3500 25 70-100 1 3.625 0.947 1.736 2.853 2.807 0.352 0.750 0.125 0.375 FWH-150B 150 1100 4600 30 125-200 1 3.625 1.156 1.836 2.892 2.768 0.344 1.000 0.188 0.406 FWH-175B 175 1450 6200 35 225-400 1 4.340 1.500 2.090 3.440 2.750 0.410 1.000 0.250 0.750 FWH-200B 200 1900 8500 40 450-600 1 4.340 2.000 2.090 3.530 2.780 0.410 1.500 0.250 0.780 FWH-225A 225 4600 23300 39 700-800 1 6.340 2.500 2.090 4.970 3.440 0.530 2.000 0.380 1.300 FWH-250A 250 6300 32200 41 1000-1200 1 6.969 3.000 3.219 5.465 4.475 0.625 2.375 0.438 1.120 FWH-275A 275 7900 40300 46 1400-1600 2 See Drawing FWH-300A 300 9800 49800 51 1mm = 0.0394” / 1” = 25.4mm FWH-325A 325 13700 63800 53 FWH-350A 350 14500 72900 58 Fig. 1: 35-1200A FWH-400A 400 19200 96700 65 A FWH-450A 450 24700 127000 74 D FWH-500A 500 29200 149000 84 E FWH-600A 600 41300 206000 108 C H FWH-700A 700 55000 298000 120 FWH-800A 800 76200 409000 129 G F B FWH-1000A 1000 92000 450000 145 FWH-1200A 1200 122000 600000 180 J FWH-1400A 1400 200000 1000000 210 Fig. 2: 1400-1600A FWH-1600A 1600 290000 1400000 230 10.219 • Watts loss provided at rated current. 0.125 0.5 0.625 3.219 1.625 1.750 Features and Benefits Typical Applications 3.5 • Excellent DC performance • DC Common bus • Low arc voltage and low • DC Drives 2 energy let-through (I t) • Power converters/rectifiers 0.75 6.219 4.25 • Superior cycling capability • Reduced voltage starters 8.969 For additional information, visit www.edisonfuse.com 75 500V High Speed Fuses FWH 35-200A(B) & 900-1600A(A) FWH 250-800A Time-Current Curve Time-Current Curve 3 4 10 10 6 4 2 3 10 6 2 10 4 2 FWH-300A FWH-400A 2 10 FWH-500A FWH-600A 6 FWH-800A 4 1 10 FWH-900A 2 FWH-1000A 1 10 FWH-1200A 6 FWH-1400A FWH-1600A 4 2 0 10 0 FWH-80B 10 FWH-90B 6 FWH-100B 4 FWH-125B FWH-35B 2 FWH-150B FWH-40B FWH-175B –1 10 FWH-45B FWH-200B –1 10 FWH-50B 6 FWH-60B 4 FWH-70B 2 –2 10 6 –2 4 10 2 –3 10 6 4 –3 2 10 –4 10 24 68 22468 22468 2 3 4 10 10 10 Prospective Current In Amps RMS –4 10 2 3 4 5 10 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve Peak Let-Through Curve 5 5 10 10 FWH-1600A B FWH-1400A 6 FWH-1200A FWH-1000A 4 2 4 4 10 10 6 FWH-800A 4 FWH-600A FWH-500A FWH-400A FWH-300A 2 FWH-250A 3 3 10 10 FWH-200B 6 FWH-150B FWH-125B 4 FWH-100B A FWH-80B FWH-60B FWH-50B 2 FWH-40B FWH-35B 2 2 10 10 24 6 24 6 2 4 6 2 102 103 104 105 2 3 4 5 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 76 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Peak Let-Through Current Peak Let-Through Current Virtual Pre-Arcing Time In Seconds UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 600V High Speed Fuses Catalog Number FWC 6 – 32A 2.0 Arc Voltage FWC (10 x 38mm) U L 1.6 This curve gives the peak Specifications arc voltage, U , which 1.2 L Description: Ferrule style high 3 may appear across the 10 speed fuses. fuse during its operation 800 Dimensions: See dimensions as a function of theapplied 600 illustration. working voltage, E , (rms) g 500 Ratings: at a power 400 Volts: — 600Vac/700Vdc (6-25A) factor of 15%. E g 300 600Vac (30-32A) 200 300 400 500 600 Power Losses Amps: — 6-32A 1.0 Watts loss at rated Kp 0.8 IR: — 200kA RMS Sym. current is given in the 0.6 — 50kA @ 700Vdc (6-25A) electrical characteristics. 0.5 Agency Information: CE, UL Recognition JFHR8.E91958 The curve allows the 0.4 6-32A. & CSA Component Acceptance file Class 1422-30, calculation of the power 0.3 (53787) on (6-32A) losses at load currents 0.2 lower than the rated Electrical Characteristics current. The correction 2 1.5 factor, K , is given as a Total Clearing I t p I K b 0.1 function of the RMS load 2 1.0 30 40 50 60 80 90 100% The total clearing I t at rated 70 current, I , in % of the b voltage and at power factor rated current. of 15% are given in the 0.5 electrical characteristics. For Catalog Numbers other voltages, the clearing Electrical Characteristics 2 2 2 0.3 Rated I t (A Sec) I t is found by multiplying by Catalog Current Clearing Watts 0.2 correction factor, K, given as Numbers Size RMS-Amps Pre-arc at 600V Loss a function of applied working FWC-6A10F 64 30 1.5 Eg 0.15 FWC-8A10F 86 50 2.0 voltage, E , (rms). g 100 250 400 500 600 FWC-10A10F 10 9 70 2.5 FWC-12A10F 12 15 120 3.0 FWC-16A10F 16 25 150 3.5 10 x 38mm FWC-20A10F 20 34 260 4.8 13 1 ( ⁄32˝ x 1 ⁄2˝) FWC-25A10F 25 60 390 6.0 Dimensions - mm (in) FWC-30A10F 30 95 600 7.5 FWC-32A10F 32 95 600 7.5 38.1 10.3 • Watts loss provided at rated current. (1.500") (0.406") Features and Benefits • Excellent cycling capability and DC performance 2 • Low arc voltage and low energy let-through (I t) • Low watts loss in a compact size • Used with finger-safe holders/blocks 9.5 (0.375") Typical Applications • DC Common bus • DC Drives • Power converters/rectifiers • Reduced voltage starters For additional information, visit www.edisonfuse.com 77 600V High Speed Fuses Catalog Number FWC 6 – 32A FWC 6-32A: 600V (10 x 38mm) Time-Current Curve 4 10 6 4 2 3 10 FWC-6A10F 6 FWC-8A10F 4 FWC-10A10F 2 FWC-12A10F 2 FWC-16A10F 10 FWC-20A10F 6 FWC-25A10F 4 FWC-30A10F & FWC-32A10F 2 1 10 6 4 2 0 10 6 4 2 –1 10 6 4 2 –2 10 6 4 2 –3 10 6 4 2 –4 10 1 22468 2 22468 3 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve 4 10 6 FWC-30A10F & FWC-32A10F FWC-25A10F 4 FWC-20A10F FWC-16A10F 2 3 10 6 4 2 FWC-12A10F FWC-10A10F 2 10 FWC-8A10F FWC-6A10F 6 4 2 1 10 246 246 246 4 6 2 1 2 3 4 5 10 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 78 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Virtual Pre-Arcing Time In Seconds Peak Let-Through Current UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 690V/700V High Speed Fuses Catalog Number FWP 1 – 50A Arc Voltage FWP (14 x 51mm) 1.4 This curve gives the peak Specifications U 1.2 L arc voltage, U , which may L 3 Description: Ferrule style high 10 appear across the fuse 9 speed fuses with and without during its operation as a 8 indicating striker. 7 function of theapplied Dimensions: See dimensions 6 working voltage, E , (rms) g illustrations. 5 at a power factor of 15%. Ratings: 4 Power Losses Volts: — 690Vac (IEC) E g 3 — 700Vac (UL) Watts loss at rated current 200 300 400 500 600 700 FWP with is given in the electrical — 800Vdc (5-50A) striker option. 1.0 characteristics. The curve Kp Amps: — 1-50A 0.8 allows the calculation of IR: — 200kA RMS Sym. 0.6 the power losses at load 0.5 — 50kA @800Vdc currents lower than the 0.4 Agency Information: CE, UL Recognition JFHR2.E91958, rated current. The 0.3 CSA Component Acceptance file Class 1422-30, 1422-90 correction factor, K , is p (53787) for versions without indicator only. Designed and given as a function of the 0.2 tested to IEC 60269: Part 4. RMS load current, I , in % b of the rated current. Electrical I b 0.1 1.4 Characteristics Catalog Numbers 30 40 50 60 70 80 90 100% 1.2 K 2 Electrical Characteristics 1.0 Total Clearing I t 2 2 Rated I t (A Sec) 0.9 2 Catalog Current Minimum Clearing At Watts The total clearing I t at 0.8 Numbers Size RMS-Amps Melting Rated Voltage Loss 0.7 rated voltage and at power Without Striker 0.6 factor of 15% are given in FWP-1A14F 1— — — FWP-2A14F 2— — — 0.5 the electrical 1) FWP-2.5A14F 2.5 —— — characteristics. For other 0.4 FWP-3A14F 3— — — 2 2) voltages, the clearing I t is E FWP-4A14F 4— — — g 0.3 FWP-5A14F 14 x 51mm 5 1.6 11.0 1.5 found by multiplying by cor- 9 FWP-10A14F ( ⁄16" x 2") 10 3.6 38.5 4 200 300 400 500 600 700 rection factor, K, given as a FWP-15A14F 15 8.6 70 5.5 1) 5-30A Range function of applied working voltage, FWP-20A14F 20 26.0 230 6 2) 32-50A Range E , (rms). FWP-25A14F 25 46.5 375 7 g FWP-30A14F 30 58 485 9 FWP-32A14F 32 68 600 7.6 FWP-40A14F 40 84 750 8 Dimensions - mm (in) FWP-50A14F 50 200 1800 9 Without Striker With Striker* FWP-10A14FI 10 3.6 38.5 4 FWP-15A14FI 15 8.6 70 5.5 50.8 14.3 (2.000") (0.563") FWP-20A14FI 14 x 51mm 20 26.0 230 6 9 FWP-25A14FI ( ⁄16” x 2”) 25 46.5 375 7 FWP-30A14FI 30 58 485 9 FWP-32A14FI 32 68 600 7.6 FWP-40A14FI 40 84 750 8 FWP-50A14FI 50 200 1800 9 15.5 *Striker range is 600Vdc only (0.610") • Watts loss provided at rated current. With Striker 59 (2.323") 51 (2.00") Features and Benefits 14.3 • Excellent cycling capability and DC performance (0.563") 13 (0.511") I2 • Low arc voltage and low energy let-through ( t) • Low watts loss in a compact size • Used with finger-safe holders/blocks 5 (0.197") For additional information, visit www.edisonfuse.com 79 690V/700V High Speed Fuses Catalog Number FWP 1 – 50A Without Striker FWP 5-50A: 660V/700V (14 x 51mm) Time-Current Curve 4 10 6 4 2 3 10 6 4 2 FWP-25A14F 2 10 FWP-30A14F FWP-32A14F 6 4 FWP-40A14F FWP-50A14F 2 1 10 6 4 2 0 10 6 FWP-5A14F 4 FWP-10A14F FWP-15A14F 2 FWP-20A14F –1 10 6 4 2 –2 10 6 4 2 –3 10 6 4 2 –4 10 24 68 1 24 2 68 2 22468 3 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve 4 10 FWP-50A14F 6 FWP-40A14F FWP-32A14F 4 FWP-30A14F FWP-25A14F 2 3 10 6 4 2 FWP-20A14F 2 FWP-15A14F 10 FWP-10A14F FWP-5A14F 6 4 2 1 10 246 246 246 246 2 1 2 3 4 5 10 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 80 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Virtual Pre-Arcing Time In Seconds Peak Let-Through Current UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 690V/700V High Speed Fuses Catalog Number FWP 20 – 100A, Striker Optional 1.4 Arc Voltage FWP (22 x 58mm) 1.2 U L This curve gives the peak 3 Specifications 10 arc voltage, U , which may 9 L Description: Ferrule style high 8 appear across the fuse speed fuses with and without 7 during its operation as a indicating striker. 6 function of theapplied Dimensions: See dimensions 5 working voltage, E , (rms) g illustration. at a power factor of 15%. 4 Ratings: E g 3 Volts: — 690Vac (IEC) 200 300 400 500 600 700 — 700Vac (UL) Power Losses FWP with 1.0 — 500Vdc (20-100A) striker Kp Watts loss at rated current 0.8 option. Amps: — 20-100A is given in the electrical 0.6 IR: — 200kA RMS Sym. characteristics. The curve 0.5 allows the calculation of — 50kA @ 500Vdc 0.4 the power losses at load Agency Information: CE, UL Recognition JFHR2.E91958, 0.3 currents lower than the CSA Component Acceptance file Class 1422-30, 1422-90 rated current. The 0.2 (53787) correction factor, K , is p Electrical given as a function of the I b Characteristics RMS load current, I , in % 0.1 b 30 40 50 60 70 80 90 100% of the rated current. 2 Total Clearing I t 1.4 2 1.2 K The total clearing I t at Catalog Numbers 1.0 rated voltage and at power Electrical Characteristics 2 2 0.9 Rated I t (A Sec) factor of 15% are given in 0.8 Catalog Current Minimum Clearing At Watts the electrical 0.7 Numbers Size RMS-Amps Melting Rated Voltage Loss characteristics. For other 0.6 Without Striker 2 FWP-20A22F 20 19.0 260 5 voltages, the clearing I t is 0.5 FWP-25A22F 25 34.0 410 6 found by multiplying by FWP-32A22F 22 x 58mm 32 53.5 605 8 0.4 7 9 correction factor, K, given FWP-40A22F ( ⁄8" x 2 ⁄32") 40 68 750 9 E g FWP-50A22F 50 135 1600 9.5 as a function of applied 0.3 FWP-63A22F 63 280 3080 11 working voltage, E , (rms). 200 300 400 500 600 700 g FWP-80A22F 80 600 6600 13.5 FWP-100A22F 100* 1100 12500 16 With Striker FWP-20A22FI 20 19.0 260 5 Dimensions - mm (in) FWP-25A22FI 25 34.0 410 6 FWP-32A22FI 22 x 58mm 32 53.5 605 8 7 9 Without Striker FWP-40A22FI ( ⁄8" x 2 ⁄32") 40 68 750 9 58.0 22.2 FWP-50A22FI 50 135 1600 9.5 (2.283") (0.875") FWP-63A22FI 63 280 3080 11 FWP-80A22FI 80 600 6600 13.5 FWP-100A22FI 100* 1100 12500 16 *IEC/UL Voltage rating 690/700 Features and Benefits 15.0 (0.591") • Excellent cycling capability and DC performance 2 • Low arc voltage and low energy let-through (I t) With Striker • Low watts loss in a compact size 66 (2.598") • Used with finger-safe holders/blocks 58 (2.283") 5 16 (0.630" (0.197") Typical Applications • DC Common bus • DC Drives • Power converters/rectifiers • Reduced voltage starters 22.2 (0.874") For additional information, visit www.edisonfuse.com 81 690V/700V High Speed Fuses Catalog Number FWP 20 – 100A, Striker Optional Without Striker FWP 20-100A: 660V/700V (22 x 58mm) Time-Current Curve 4 10 6 4 2 3 10 6 4 2 FWP-50A22F 2 10 FWP-63A22F 6 FWP-80A22F FWP-100A22F 4 2 1 10 6 4 FWP-20A22F 2 FWP-25A22F 0 FWP-32A22F 10 FWP-40A22F 6 4 2 –1 10 6 4 2 –2 10 6 4 2 –3 10 6 4 2 –4 10 1 22468 2 22468 3 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve 4 10 FWP-100A22F FWP-80A22F 6 FWP-63A22F 4 FWP-50A22F 2 3 10 6 FWP-40A22F FWP-32A22F 4 FWP-25A22F FWP-20A22F 2 2 10 24 6 24 6 2 4 6 2 2 3 4 5 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 82 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Peak Let-Through Current Virtual Pre-Arcing Time In Seconds UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 700V High Speed Fuses Catalog Number FWP 5 – 1200A Arc Voltage 2 FWP U L This curve gives the peak arc 1.6 Specifications 1.4 voltage, U , which may L Description: North American 1.2 1) appear across the fuse 3 10 style stud-mount fuses. during its operation as a func- 2) 8 Dimensions: See Dimensions tion of the applied illustrations. 6 working voltage, E , (rms) at g 5 Ratings: a power factor of 15%. 4 Volts: — 700Vac/dc E Power Losses g 3 Amps: — 5-1200A 300 400 500 600 700 Watts loss at rated current is IR: — 200kA RMS Sym. 1) 125-600A Range given in the electrical 2) 35-100 & 700-1200A Range — 50kA @700Vdc characteristics. The curve 1.0 Agency Information: CE, UL Recognition JFHR2.E91958 Kp allows the calculation of the 0.8 FWP-_B (5-100A, 700-1200A), JFHR2.E56412 FWP-_A power losses at load 0.6 (125-600A) & CSA Component Acceptance file Class 0.5 currents lower than the rated 1422-30, (53787) on 5-800A 0.4 current. The correction factor, 0.3 K , is given as a function of Electrical Characteristics p 1.5 K the RMS load current, I , in % 0.2 b 2 Total Clearing I t 1.0 of the rated current. 2 The total clearing I t at rated I b 2) 0.1 voltage and at power factor of 30 40 50 60 80 90 100% 70 0.5 Catalog Numbers 15% are given in the electrical Electrical Characteristics 2 2 1) Rated I t (A Sec) characteristics. For other 0.3 2 Catalog Current Clearing Watts 3) voltages, the clearing I t is 0.2 Numbers RMS-Amps Pre-arc at 700V Loss found by multiplying by FWP-5B 5 1.6 10 1.5 Eg correction factor, K, given as FWP-10B 10 3.6 20 4 0.15 FWP-15B 15 10 75 5.5 316 460 604 700 a function of applied working FWP-20B 20 26 180 6 1) 35-100A Range voltage, E , (rms). g FWP-25B 25 44 340 7 2) 125-600A Range 3) 700-1200A Range FWP-30B 30 58 450 9 FWP-35B 35 34 160 12 FWP-40B 40 76 320 12 Dimensions - in Amp FWP-50B 50 135 600 12 Range Fig. AB CD E F G H I FWP-60B 60 210 950 15.5 5-30 1 2.870 0.563 1.855 2.477 2.477 0.250 0.405 0.063 0.250 FWP-70B 70 305 2000 18 35-60 1 4.375 0.813 2.750 3.708 3.312 0.344 0.725 0.125 0.542 FWP-80B 80 360 2400 21 70-100 1 4.406 0.947 2.594 3.625 3.563 0.344 0.750 0.125 0.375 FWP-90B 90 415 2700 25 125-200 1 5.090 1.500 2.840 4.190 3.500 0.410 1.000 0.250 0.750 FWP-100B 100 540 3500 27 225-400 1 5.090 2.000 2.840 4.280 3.530 0.410 1.500 0.250 0.780 FWP-125A 125 1800 7300 28 450-600 1 7.090 2.500 2.840 5.720 4.190 0.530 2.000 0.380 1.300 FWP-150A 150 2900 11700 32 700-800 1 6.630 2.000 2.844 5.562 5.062 0.625 1.500 0.250 0.875 FWP-175A 175 4200 16700 35 900-1000 2 See Drawing FWP-200A 200 5500 22000 43 1200 3 See Drawing FWP-225A 225 7700 31300 45 1mm = 0.0394” / 1” = 25.4mm FWP-250A 250 10500 42500 48 FWP-300A 300 17600 71200 58 FWP-350A 350 23700 95600 65 Fig. 1: 5-800A Fig. 2: 900-1000A Fig. 3: 1200A FWP-400A 400 31000 125000 78 3.500 1.375 FWP-450A 450 36400 137000 94 0.125 J FWP-500A 500 45200 170000 107 0.500 FWP-600A 600 66700 250000 122 FWP-700A 700 54000 300000 125 9.590 6.840 3.844 5.966 3.844 FWP-800A 800 78000 450000 140 10.844 7.594 5.154 AE D C FWP-900A 900 91500 530000 150 FWP-1000A 1000 120000 600000 170 0.625 1.031 FWP-1200A 1200 195000 1100000 190 • Watts loss provided at rated current. 1.625 1.750 0.625 2.750 0.750 Typical Applications Features and Benefits 0.5 4.250 • DC Common bus F • Excellent DC performance 3.500 G • DC Drives • Low arc voltage and low 2 H • Power converters/rectifiers energy let-through (I t) B • Reduced voltage starters • Superior cycling capability For additional information, visit www.edisonfuse.com 83 700V High Speed Fuses Catalog Number FWP 5 – 1200A FWP 5-30A(B): 700V FWP 35-100A(B) & 700-1200A(A): 700V Time-Current Curve Time-Current Curve 4 4 10 10 6 6 4 4 2 2 3 3 10 10 6 6 4 4 2 2 FWP-700A 2 2 10 10 FWP-800A 6 FWP-900A 6 FWP-1000A 4 4 FWP-1200A 2 2 1 1 10 10 6 6 FWP-35B 4 4 FWP-40B FWP-50B 2 2 FWP-60B 0 0 10 FWP-70B 10 FWP-80B 6 6 FWP-5B FWP-90B 4 4 FWP-10B FWP-100B 2 FWP-15B 2 FWP-20B –1 –1 10 10 FWP-25B 6 6 FWP-30B 4 4 2 2 –2 –2 10 10 6 6 4 4 2 2 –3 10 –3 10 6 6 4 4 2 2 –4 10 –4 10 24 68 2 24 2 68 3 24 2 68 4 2 46 8 24 2 68 22 46 8 1 2 3 10 10 10 10 10 10 Prospective Current In Amps RMS Prospective Current In Amps RMS Peak Let-Through Curve Peak Let-Through Curve 6 4 10 10 FWP-1200A 6 FWP-1000A 6 FWP-800A 4 4 FWP-700A 2 FWP-30B 2 FWP-25B 3 10 4 10 6 4 6 2 4 FWP-20B FWP-15B 2 10 FWP-10B 2 FWP- 5B 6 4 3 10 2 6 FWP-100B 1 4 10 FWP-70B 246 246 246 246 2 1 2 3 4 5 FWP-60B 10 10 10 10 10 Prospective Short-Circuit Current FWP-50B 2 FWP-40B FWP-35B 2 10 24 6 24 6 24 6 2 2 3 4 5 10 10 10 10 Prospective Short-Circuit Current For additional information, visit www.edisonfuse.com 84 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Virtual Pre-Arcing Time In Seconds Peak Let-Through Current Virtual Pre-Arcing Time In Seconds Peak Let-Through Current UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 700V High Speed Fuses Catalog Number FWP 5 – 1200A FWP 150-600A: 700V Time-Current Curve 3 10 2 10 FWP-150A FWP-200A FWP-300A 1 10 FWP-400A FWP-600A 0 10 –1 10 –2 10 –3 10 –4 10 2 3 4 5 10 10 10 10 Prospective Current In Amperes RMS Prospective Current In Amps RMS Peak Let-Through Curve 5 10 B 4 10 FWP-600A FWP-400A FWP-300A FWP-200A FWP-150A 3 10 A 2 10 2 3 4 5 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 85 Peak Let-Through Current Virtual Pre-Arcing Time In Seconds 1000V High Speed Fuses Catalog Number FWJ 20 – 30A 2000 Arc Voltage FWJ (14 x 67mm) U L This curve gives the peak 1600 Specifications arc voltage, U , which may L Description: Ferrule style high appear across the fuse speed fuses. 1200 during its operation as a Dimensions: See dimensions function of theapplied 800 illustration. working voltage, E , (rms) g Ratings: at a power factor of 15%. 400 Volts: — 1000Vac/800Vdc E g Amps: — 20-30A 200 600 1000 1400 1800 IR: — 25kA RMS Sym. Power Losses 1.0 — 20kA @ 800Vdc Watts loss at rated current Kp 0.8 Agency Information: CE, UL Recognized JFHR2 E91958 is given in the electrical 0.6 characteristics. The curve 0.5 Electrical allows the calculation of 0.4 Characteristics 1.5 the power losses at load 0.3 K currents lower than the 2 Total Clearing I t 1.0 0.2 rated current. The 2 The total clearing I t at correction factor, Kp, is rated voltage and at power given as a function of the I 0.5 b 0.1 factor of 15% are given in RMS load current, I , in % b 30 40 50 60 80 90 100% 70 the electrical of the rated current. 0.3 characteristics. For other 0.2 2 Catalog Numbers voltages, the clearing I t is Electrical Characteristics found by multiplying by Eg 2 2 0.15 I t (A Sec) Rated correction factor, K, given 200 500 800 1000 Catalog Current Clearing Watts as a function of applied Numbers Size RMS-Amps Pre-arc at 1000V Loss FWJ-20A14F 14 x 67mm 20 25 220 9 working voltage, E , (rms). g 9 5 FWJ-25A14F ( ⁄16” x 2 ⁄8”) 25 33 350 11 FWJ-30A14F 30 52 450 14 • Watts loss provided at rated current. Dimensions - mm (in) Features and Benefits 66.7 14.5 • Excellent cycling capability and DC performance (2.626") (0.571") 2 • Low arc voltage and low energy let-through (I t) • Low watts loss in a compact size • Used with finger-safe holders/blocks Typical Applications • DC Common bus 15.9 • DC Drives (0.625") • Power converters/rectifiers • Reduced voltage starters Fuseclips: • Catalog Number: 5591 (see data sheet 2132) For additional information, visit www.edisonfuse.com 86 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 1000V High Speed Fuses Catalog Number FWJ 20 – 30A FWJ 20-30A: 1000V (14 x 67mm) Time-Current Curve 4 10 6 4 2 3 10 6 4 2 2 10 6 4 2 1 10 6 4 FWJ-20A14F 2 FWJ-25A14F 0 FWJ-30A14F 10 6 4 2 –1 10 6 4 2 –2 10 6 4 2 –3 10 6 4 2 –4 10 1 22468 2 22468 3 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve 4 10 6 4 FWJ-30A14F 2 FWJ-25A14F FWJ-20A14F 3 10 6 4 2 2 10 6 4 2 1 10 246 246 2 46 246 2 1 2 3 4 5 10 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 87 Virtual Pre-Arcing Time In Seconds Peak Let-Through Current Catalog Number FWJ 35 – 2000A Arc Voltage 2000 FWJ U L This curve gives the peak 1600 Specifications arc voltage, U , which may L Description: North American style appear across the fuse 1200 stud-mount fuses. during its operation as a Dimensions: See Dimensions illus- function of the applied 800 tration. working voltage, E , (rms) g Ratings: at a power factor of 15%. 400 Volts: — 1000Vac/800Vdc E g Power Losses Amps: — 35-2000A 200 600 1000 1400 1800 Watts loss at rated current IR: — 25kA (35-200A) 1.0 is given in the electrical Kp — 100kA (250-2000A) 0.8 characteristics. The curve — 50kA @ 800Vdc 0.6 allows the calculation of (35-200A, 450-600A) 0.5 the power losses at load 0.4 Agency Information: CE, UL currents lower than the 0.3 Recognition JFHR8.E91958 on rated current. The 35-600A only. correction factor, K , is p 0.2 given as a function of the Electrical Characteristics RMS load current, I , in % b I b of the rated current. 2 0.1 Total Clearing I t 1.5 30 40 50 60 80 90 100% 70 K Catalog Numbers 2 The total clearing I t at rated Electrical Characteristics 1.0 voltage and at power factor of Rated I2t (A2 Sec) 15% are given in the electrical Catalog Current Clearing Watts Numbers RMS-Amps Pre-arc at 1000V Loss characteristics. For other 0.5 FWJ-35A 35 210 2000 7 2 voltages, the clearing I t is FWJ-40A 40 300 2500 8 found by multiplying by FWJ-50A 50 470 3500 10 0.3 FWJ-60A 60 670 5000 11 correction factor, K, given as a 0.2 FWJ-70A 70 1100 6900 12 function of applied working FWJ-80A 80 1550 9700 13 Eg voltage, E , (rms). FWJ-90A 90 1900 12000 14 g 0.15 200 500 800 1000 FWJ-100A 100 2800 17500 15 FWJ-125A 125 4800 35000 16 FWJ-150A 150 6300 45000 25 Dimensions - in FWJ-175A 175 7500 65000 30 Amp FWJ-200A 200 11700 80000 32 Range Fig. AB CD E F G H I FWJ-250A 250 16000 112000 50 35-60 1 5.000 0.940 3.110 4.235 4.180 0.352 0.750 0.125 0.380 FWJ-300A 300 23500 164000 56 70-100 1 4.932 1.125 3.085 4.266 4.156 0.352 1.000 0.188 0.407 FWJ-350A 350 33000 231000 62 125-200 1 5.685 1.526 3.261 4.803 4.055 0.445 1.000 0.250 0.819 FWJ-400A 400 47000 330000 67 250-400 1 5.768 2.000 3.500 4.811 4.150 0.433 1.500 0.250 0.764 FWJ-500A 500 39500 329000 95 500-600 1 7.201 2.500 3.465 5.984 4.706 0.562 2.000 0.375 1.201 FWJ-600A 600 61000 520000 105 800-2000 1 6.811 3.500 3.312 5.472 4.962 0.625 2.750 0.500 0.880 FWJ-800A 800 87000 500000 182 1mm = 0.0394” / 1” = 25.4mm FWJ-1000A 1000 190000 1100000 206 FWJ-1200A 1200 370000 2100000 240 Fig. 1: 35-2000A FWJ-1400A 1400 470000 2700000 248 A FWJ-1600A 1600 700000 4000000 267 D FWJ-1800A 1800 925000 5300000 239 FWJ-2000A 2000 1330000 7600000 244 E • Watts loss provided at rated current. C H Features and Benefits • Excellent DC performance G F B 2 • Low arc voltage and low energy let-through (I t) • Low watts loss J • Superior cycling capability Typical Applications • DC Common bus • DC Drives • Power converters/rectifiers • Reduced voltage starters For additional information, visit www.edisonfuse.com 88 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section 1000V High Speed Fuses Catalog Number FWJ 35 – 2000A FWJ 35-600A: 1000V FWJ 800-2000A: 1000V Time-Current Curve Time-Current Curve 4 4 10 10 6 6 4 4 2 2 3 3 10 10 6 6 4 4 2 2 2 10 2 10 6 FWJ-200A 6 4 FWJ-250A FWJ-800A 4 FWJ-1000A FWJ-300A 2 FWJ-1200A 2 FWJ-350A 1 FWJ-1400A 10 1 FWJ-400A 10 FWJ-1600A 6 FWJ-500A FWJ-1800A 6 4 FWJ-600A FWJ-2000A 4 2 2 0 10 0 10 6 4 6 4 2 2 –1 10 –1 6 10 4 6 4 FWJ-40A 2 FWJ-50A –2 10 2 FWJ-60A 6 FWJ-70A –2 10 4 FWJ-80A 6 FWJ-90A 2 4 FWJ-100A –3 FWJ-125A 10 2 FWJ-150A 6 –3 10 FWJ-175A 4 6 2 4 –4 10 24 68 24 2 68 24 2 68 2 3 4 5 10 10 10 –4 Prospective Current In Amperes RMS Prospective Current in Amps 10 22468 24 2 68 2 3 4 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve 2 FWJ-2000A FWJ-1800A 5 10 FWJ-1600A FWJ-1400A FWJ-1250A 6 FWJ-1000A FWJ-600A 4 FWJ-800A FWJ-400A FWJ-500A FWJ-350A FWJ-300A 2 FWJ-250A FWJ-200A FWJ-175A 4 10 FWJ-150A FWJ-125A FWJ-100A FWJ-90A 6 FWJ-80A FWJ-70A 4 FWJ-60A FWJ-50A FWJ-40A 2 3 10 6 4 2 2 10 246 246 2 46 2 46 2 3 4 5 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 89 Virtual Pre-Arcing Time In Seconds Peak Let-Through Current Virtual Pre-Arcing Time In Seconds British Style High Speed Fuses Voltage Rating Introduction All Edison British style fuses are tested to IEC 269: Part 4. British BS 88 Contents This standard requires a test voltage which is 5% higher Fuse Volts Amp Range than the rated voltage. In North America, fuses are required 240 6-900 to clear only their rated voltage. 690 6-710 Accessories Accessories Trip-indicator fuses are available for use in parallel with the main fuse. Indicator fuses can be attached to the • Indicator System (see end of this section) associated fuse, or mounted separately in panel-mounted • Fuse Blocks (see BH Series fuse blocks in this catalog) fuseclips. In addition, a push-on adapter and microswitch attachment are available, to provide remote indication. British BS 88 Fuse Ranges The BH Series fuse blocks are also available for most Amps Volts AC DC applications. 6-900 240 X— 6-900 150 —X 6-700 690 X— 6-700 500 —X General Information Designed and tested to: • BS 88: Part 4 • IEC 269: Part 4 • UL Recognized We offer the industry’s widest range of British style semiconductor fuses and accessories. Edison British style products use innovative arc quenching techniques and high grade materials to provide: 2 • Minimal energy let-through (I t) • Excellent DC performance • Good surge withstand profile British style fuses are typically found in equipment manufactured in the United Kingdom or British Commonwealth countries. However, North American manufacturers have begun to specify British style fuses — particularly in UPS applications at 240V or less — to take advantage of their size, performance and cost benefits. For additional information, visit www.edisonfuse.com 90 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section British Style 240V High Speed Fuses Catalog Number LCT, LET, LMT, LMMT 6 – 900A 750 Arc Voltage LCT, LET, LMT, LMMT U L This curve gives the peak Specifications 1) arc voltage, U , which may L Description: BS 88 style 500 appear across the fuse stud-mount fuses. 2) during its operation as a Dimensions: See dimensions function of theapplied illustrations. working voltage, E , (rms) 250 g Ratings: at a power factor of 15%. Volts: — 240Vac/150Vdc E g Amps: — 6-900A 100 200 300 Power Losses IR: — 200kA RMS Sym. 1) LCT Watts loss at rated current 2) LET, LMT, LMMT Agency Information: CE, Designed and tested to: BS 88 1.0 is given in the electrical Part 4, IEC 269 Part 4, UL Recognized. All fuses above have Kp 0.8 characteristics. The curve been tested at 318Vac. Consult Edison for specific UL 0.6 allows the calculation of Recognition status. 0.5 the power losses at load 0.4 Electrical Characteristics currents lower than the 1.6 0.3 rated current. The correc- 2 K Total Clearing I t 1.4 tion factor, K , is given as 0.2 p 2 The total clearing I t at rated a function of the RMS load 1.2 voltage and at power factor current, I , in % of the b 1.0 I of 15% are given in the b rated current. 0.1 0.8 electrical characteristics. For 30 40 50 60 70 80 90 100% 2 Catalog Numbers other voltages, the clearing I t 0.6 Electrical Characteristics 1) is found by multiplying by 2 2 0.4 Rated I t (A Sec) correction factor, K, given as Catalog Current Clearing Clearing Watts 0.2 2) Numbers Type RMS-Amps Pre-arc at 120V at 240V Loss a function of applied working E g 6LCT 62 6 9 1.0 voltage, E , (rms). 501 10050200250 g 10LCT 10 3.8 12 22 2.5 1) LCT 12LCT LCT 12 7 22 32 2.5 2) LET, LMT, LMMT 16LCT 16 20 50 100 2.5 20LCT 20 25 80 160 4.0 Dimensions - mm Fig. 2: LET 25LET 25 18 120 250 4.0 7.1 Fig. 1: LCT 32LET 32 32 200 450 5.0 35LET 35 50 320 600 5.0 4 50LET 50 100 500 1400 7.0 5.5 63LET LET 63 180 1100 2200 9.0 26.2 41.8 56 80LET 80 300 1900 3800 10.0 100LET 100 600 3800 7500 10.0 28 38 47 125LET 125 600 3800 7500 16.0 9.7 160LET 160 1100 7000 16000 20.0 180LETa 180 1600 12000 29000 21.0 12.7 160LMT 160 1100 7000 16000 17.0 6.4 17.7 200LMT 200 1500 10000 20000 28.0 250LMT 250 3200 20000 40000 28.0 8.4 19.1 Fig. 4: LMMT 315LMT LMT 315 6000 35000 75000 35.0 8.7 Fig. 3: LMT 355LMT 355 8000 50000 100000 35.0 25.4 400LMT 400 14000 70000 160000 40.0 1mm = 0.0394” / 1” = 25.4mm 25.4 450LMT 450 18000 100000 220000 42.0 400LMMT 400 6000 35000 80000 60.0 500LMMT 500 14000 80000 170000 64.0 630LMMT 630 24000 150000 300000 75.0 31 59 84 LMMT 31 59 84 710LMMT 710 32000 200000 460000 77.0 800LMMT 800 52000 300000 600000 82.0 900LMMT 900 75000 400000 800000 97.0 • Watts loss provided at rated current. 13.5 • Note: 7LET, 10LET, 12LET and 16LET are available for replacement purposes on existing 13.5 10.3 equipment. 10.3 Features and Benefits Typical Applications 41 83 • Excellent cycling capability • DC Common bus 38.1 • Excellent DC performance • AC and DC drives • Low arc voltage and low • Power converters/rectifiers Indicator (Optional) 38 2 energy let-through (I t) • Reduced voltage starters For additional information, visit www.edisonfuse.com 91 British Style 240V High Speed Fuses Catalog Number LCT, LET, LMT, LMMT 6 – 900A LCT 6-20A: 240V LET 25-180A: 240V Time-Current Curve Time-Current Curve 4 4 10 10 6 6 4 4 2 2 3 3 10 10 6 6 4 4 2 6LCT 2 10LCT 2 2 10 10 12LCT 80LET 6 6 16LCT 100LET 4 4 20LCT 125LET 2 2 160LET 1 1 180LETa 10 10 6 6 4 4 25LET 2 2 32LET 0 35LET 0 10 10 50LET 6 6 63LET 4 4 2 2 –1 –1 10 10 6 6 4 4 2 2 –2 –2 10 10 6 6 4 4 2 2 –3 –3 10 10 6 6 4 4 2 2 –4 10 –4 10 24 68 22468 24 2 68 22468 24 2 68 1 2 3 1 2 3 10 10 10 10 10 10 Prospective Current In Amps RMS Prospective Current In Amps RMS Data Sheet: 35785296 Data Sheet: 35785293 Peak Let-Through Curve 2 5 10 6 4 2 4 10 180LET 6 160LET 4 125 & 100LET 80LET 2 3 10 6 4 63LET 2 50LET 35LET 2 32LET 10 25LET 20LCT 6 16LCT 4 12LCT 10LCT 6LCT 2 SYMMETRICAL FAULT FULLY ASYMMETRICAL FAULT 1 10 264246 246 246 1 2 3 4 5 10 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 92 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Virtual Pre-Arcing Time In Seconds Peak Let-Through Current Virtual Pre-Arcing Time In Seconds UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section British Style 240V High Speed Fuses Catalog Number LCT, LET, LMT, LMMT 6 – 900A LMT 160-450A: 240V LMMT 400-900A: 240V Time-Current Curve Time-Current Curve 4 10 4 10 6 6 4 4 2 2 3 10 3 10 6 6 4 4 2 2 160LMT 2 10 400LMMT 200LMT 2 10 500LMMT 6 250LMT 4 6 630LMMT 315LMT 4 710LMMT 355LMT 2 800LMMT 400LMT 2 1 10 900LMMT 450LMT 1 10 6 4 6 4 2 2 0 10 0 10 6 6 4 4 2 2 –1 10 –1 10 6 6 4 4 2 2 –2 10 –2 10 6 6 4 4 2 2 –3 10 –3 10 6 6 4 4 2 2 –4 10 –4 2 22468 3 24 2 68 4 10 10 10 10 2 22468 3 22468 4 10 10 10 Prospective Current In Amps RMS Prospective Current In Amps RMS Data Sheet: 35785294 Data Sheet: 35785295 Peak Let-Through Curve 2 5 10 900LMMT 800LMMT 6 710LMMT 4 630LMMT 450LMT 400 & 500LMMT 2 355LMT 315LMT 4 250LMT 10 6 200LMT 160LMT 4 2 3 10 6 4 2 2 10 6 4 2 SYMMETRICAL FAULT FULLY ASYMMETRICAL FAULT 1 10 264246 246 246 1 2 3 4 5 10 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 93 Virtual Pre-Arcing Time In Seconds Peak Let-Through Current Virtual Pre-Arcing Time In Seconds British Style 690V High Speed Fuses Catalog Number CT, ET, FE, EET, FEE, FM, FMM, MT, MMT 6 – 710A Arc Voltage CT, ET, FE, EET, FEE, FM, FMM, MT, MMT U L 1500 This curve gives the Specifications 1) peak arc voltage, U , L Description: BS 88 style which may appear stud-mount fuses. 1000 across the fuse during its 2) Dimensions: See dimensions operation as a function of illustrations. the applied working volt- 500 Ratings: age, E , (rms) at a g Volts: — 690Vac/500Vdc power factor of 15%. E g Amps: — 6-710A Power Losses 200 400 600 660 IR: — 200kA RMS Sym. 1) CT Watts loss at rated 2) ET, FE, EET, FEE, FM, FMM Agency Information: CE, Designed and tested to: BS 88 current is given in the 1.0 Part 4, IEC 269 Part 4, UL Recognized. MT and MMT — Kp electrical characteristics. 0.8 350Vdc (IEC) rating. Consult Edison for UL Recognition The curve allows the cal- 0.6 status. 0.5 culation of the power 0.4 losses at load currents Electrical lower than the rated 0.3 Characteristics current. The correction 2 0.2 1.6 Total Clearing I t factor, K , is given as a K p 2 1.4 function of the RMS load The total clearing I t at rated current, Ib, in % of the I 1.2 b voltage and at power factor 0.1 rated current. 30 40 50 60 80 90 100% 70 of 15% are given in the 1.0 electrical characteristics. For 0.8 Features and Benefits 2 other voltages, the clearing I t 0.6 • Excellent cycling capability is found by multiplying by • Excellent DC performance 0.4 correction factor, K, given as 2 1) • Low arc voltage and low energy let-through (I t) 2) a function of applied working 0.2 • Low watts loss E g voltage, E , (rms). g 200 300 400 500 600 690 Typical Applications 1) CT, ET, EET, FE, FEE, MT, MMT • DC Common bus 2) FM, FMM • DC Drives • Power converters/rectifiers • Reduced voltage starters Dimensions - mm Fig. 2: ET, FE Fig. 3: EET, FEE Fig. 4: FM, MT Fig. 5: FMM, MMT Fig. 1: CT 8.7 7.1 25.4 25.4 4 5.5 50 A 113 46 70 94 48 63.5 77 50 A 113 54.8 64.3 74.6 14 11.9 9.7 13.5 10.3 31.8 12.7 10.3 17.1 37 6.4 83 19 8.7 8.7 41 19.1 38.1 38 1mm = 0.0394” / 1” = 25.4mm Figs. 4 & 5 “A” Dimensions Type “A” FM 80-85mm FMM 80-85mm MT 85mm MMT 85mm For additional information, visit www.edisonfuse.com 94 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section British Style 690V High Speed Fuses Catalog Number CT, ET, FE, EET, FEE, FM, FMM, MT, MMT 6 – 710A Catalog Numbers CT 6-20, ET 25-80A: 690V Electrical Characteristics 2 2 Rated I t (A Sec) Time-Current Curve Catalog Current Clearing Clearing Watts Numbers Type RMS-Amps Pre-arc at 415V at 660V Loss 4 10 6CT 6 1.8 8.5 12 2 6 4 10CT 10 7 30 48 3 12CT CT 12 10 40 65 3 2 16CT 16 16 66 110 7 3 10 20CT 20 32 150 220 7 6 4 25ET 25 25 150 250 7 25ET 32ET 32 32 190 350 11 32ET 2 35ET 35ET 35 52 310 500 11 2 10 40ET 40ET 40 103 600 900 9 6 ET 45ET 45ET 45 103 680 1100 11 4 56ET 63ET 56ET 56 135 950 1500 14 2 80ET 63ET 63 171 1200 2000 16 1 10 80ET 80 360 2500 4000 18 6CT 6 10CT 35FE 35 33 130 200 9 4 12CT 40FE 40 52 180 300 9 16CT 2 45FE 45 76 270 450 11 20CT 0 10 50FE 50 103 380 600 11 6 63FE FE 63 135 480 750 12 4 71FE 71 210 600 950 17 2 80FE 80 250 900 1500 20 –1 10 90FE 90 360 1300 2100 20 6 100FE 100 470 1800 2800 23 4 90EET 90 490 3000 4500 19 2 110EET 110 600 4000 6500 27 EET –2 140EET 140 1050 7000 12000 35 10 6 160EET 160 1500 10000 17000 39 4 100FEE 100 400 1600 2400 24 2 120FEE 120 540 1900 3100 32 –3 140FEE 140 850 2500 3800 36 10 FEE 160FEE 160 1000 3700 5700 46 6 4 180FEE 180 1400 5300 8400 46 200FEE 200 1900 7100 11400 52 2 –4 180FM 180 1400 7500 13500 40 10 2 4 6 8 1 2 2 4 6 8 2 2 2 4 6 8 3 10 10 10 200FM 200 2600 10500 18500 40 Prospective Current In Amps RMS 225FM 225 3700 14500 26500 44 250FM FM 250 5200 20500 37500 48 280FM 280 7000 30500 55000 48 315FM 315 10000 40000 77000 55 350FM 350 15000 60000 105000 55 Peak Let-Through Curve 400FMM 400 10000 40000 72500 85 450FMM 450 15000 60000 105000 90 6 500FMM 500 20000 82000 150000 100 FMM 4 550FMM 550 30000 120000 215000 100 630FMM 630 45000 180000 310000 100 2 700FMM 700 60000 245000 420000 120 5 10 160MT 160 2400 15000 25000 26 6 180MT 180 3800 25000 38000 26 4 200MT 200 6000 40000 58000 27 250MT MT 250 11500 80000 110000 32 2 280MT 280 16500 100000 150000 35 4 10 315MT 315 19000 125000 180000 42 355MT 355 22000 160000 200000 51 6 4 180MMT 180 1650 12000 18000 42 200MMT 200 2200 16000 23000 42 2 225MMT 225 3700 26000 40000 42 3 10 280MMT 280 6600 47000 70000 47 315MMT 315 8600 62000 91000 51 6 355MMT 355 13500 97000 140000 54 4 MMT 400MMT 400 21000 150000 220000 60 80ET 2 63ET 450MMT 450 30000 220000 320000 57 56ET 45ET 20CT 2 500MMT 500 42000 300000 450000 64 40ET 10 16CT 35ET 12CT 560MMT 560 60000 430000 640000 64 32ET 10CT 6 25ET 6CT 630MMT 630 68500 500000 720000 86 4 710MMT 710 78000 600000 850000 105 2 • Watts loss provided at rated current. • Note: FC, 8ET, 12ET, 15ET, 20ET, 65EET and 75EET are available for replacement 1 10 purposes on existing equipment. 2 4 6 2 4 6 2 4 6 2 4 6 2 1 2 3 4 5 10 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 95 Virtual Pre-Arcing Time In Seconds Peak Let-Through Current British Style 690V High Speed Fuses Catalog Number EET, MT, MMT 6 – 710A EET 90-160A, MT 160-355A: 690V MMT 180-710A: 690V Time-Current Curve Time-Current Curve 4 4 10 10 6 6 4 4 2 2 400MMT 3 3 10 10 450MMT 160MT 6 500MMT 6 4 180MT 560MMT 4 200MT 630MMT 2 250MT 2 710MMT 280MT 2 10 2 315MT 10 6 355MT 6 4 4 2 180MMT 2 1 10 200MMT 1 6 10 90EET 225MMT 4 110EET 280MMT 6 140EET 315MMT 4 2 160EET 355MMT 0 2 10 6 0 10 4 6 2 4 –1 10 2 6 –1 4 10 6 2 4 –2 10 2 6 4 –2 10 2 6 –3 4 10 6 2 4 –3 10 2 6 –4 10 4 2 46 8 24 2 68 2 2 46 8 2 3 4 10 10 10 2 Prospective Current In Amps RMS –4 10 22468 22468 2 3 4 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve 6 710MMT 4 630MMT 560MMT 500MMT 2 450MMT 315MT 355MT 400MMT 280MT 355MMT 5 10 250MT 315MMT 280MMT 200MT 6 180MT 225MMT 160MT 200MMT 4 180MMT 2 4 10 6 4 2 3 10 6 160EET 4 140EET 110EET 90EET 2 2 10 6 4 2 1 10 246 246 2 46 2 46 2 1 2 3 4 5 10 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 96 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Virtual Pre-Arcing Time In Seconds Peak Let-Through Current Virtual Pre-Arcing Time In Seconds UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section British Style 690V High Speed Fuses Catalog Number FE, FM, FEE, FMM 6 – 710A FE 35-100A & FM 180-350A: 690V FEE 100-200A & FMM 400-700A: 690V Time-Current Curve Time-Current Curve 4 10 4 6 10 4 6 4 2 2 3 10 6 3 10 4 6 2 4 180FM 2 10 200FM 2 6 400FMM 220FM 2 10 4 250FM 450FMM 280FM 6 500FMM 2 315FM 4 550FMM 350FM 1 630FMM 10 2 700FMM 6 4 1 10 100FEE 6 2 35FE 120FEE 4 0 40FE 140FEE 10 45FE 160FEE 6 2 50FE 4 180FEE 0 63FE 10 200FEE 2 71FE 6 80FE –1 4 10 90FE 6 100FE 2 4 –1 10 2 6 –2 10 4 6 4 2 –2 2 10 –3 6 10 4 6 4 2 2 –3 10 –4 10 6 24 68 22468 22468 2 3 4 10 10 10 4 Prospective Current In Amps RMS 2 –4 10 24 2 68 24 2 68 2 3 4 10 10 10 Prospective Current In Amps RMS Peak Let-Through Curve Peak Let-Through Curve 5 10 700FMM 8 630FMM 6 6 550FMM 4 500FMM 4 450FMM 2 400FMM 350FM 315FM 4 280FM 10 250FM 2 225FM 6 200FM 180FM 4 4 10 2 8 3 10 6 6 4 4 2 100FE 90FE 2 2 10 80FE 71FE 63FE 6 50FE 45FE 3 4 10 40FE 35FE 200FEE 8 2 180FEE 6 160FEE 1 10 140FEE 246 246 2 46 246 2 1 2 3 4 5 10 10 10 10 10 4 120FEE 100FEE Prospective Short-Circuit Current Symmetrical RMS 2 246 246 246 2 2 3 4 5 10 10 10 10 Prospective Short-Circuit Current Symmetrical RMS For additional information, visit www.edisonfuse.com 97 Virtual Pre-Arcing Time In Seconds Peak Let-Through Current Virtual Pre-Arcing Time In Seconds Peak Let-Through Current British Style High Speed Fuses Indicators & Accessories Indicator System Trip-Indicators Trip-indicators are available for use in parallel with the main fuse. They can either be attached to the associated fuse or mounted separately in panel mounted fuse clips, reference CL1. A push-on adapter and microswitch attachment is available for use with the trip indicator to give the facility of remote indication, reference MAI. Fuse ratings of 20A and below cannot usually accommodate a trip-indicator. When a trip-indicator is to be attached to the main fuse an accessory pack comprising a pair of mounting clips and an Trip-Indicator Dimensions - mm appropriate trip indicator would be required. The clips are snapped onto the fuse end caps and the indicator is C6 2B1 E 0.8 F 6.35 pressed into clips as shown. Electrical Specifications Type TI500 TI700 A D 6.8 Maximum RMS Voltage 500 700 Ref. Dim. “A” (mm) RMS Volts Maximum Peak Voltage 700 1000 TI250 37.6 250 Maximum DC Voltage 130 350 TI500 47.5 500 Cold Resistance (ohms) 0.3 0.45 TI600 55.7 600 Maximum permissible steady-state current 1.5A 1.5A TI700 61.8 700 Interrupting Capacity (RMS Symm.) 100,000 100,000 TI1100 98.4 1100 2 Pre-Arcing I t 23 23 TI1500 120.6 1500 TI2000 147.5 2000 Fuse Indicator Kits TI2500 198.3 2500 RMS For use CL1 Panel Mount Clip 8.7 6.0 Kit. Ref. Details Volts with Fuse Ref. Dimensions - mm EC-250 Fuse Mount 250 LET 14 MC250 Indicator Kits 250 LMT & LMMT EC-600 (Includes one 660 FE, FEE & ET MC600 indicator 660 FM & FMM MC700 and two clips) 700 MT & MMT 50.8 CL1 Panel Mount Clips B CL1 Panel mount fuse clips are available for mounting a trip-indicator when mounting directly on the fuse is impractical. Order part number CL1. Terminal Arrangement Microswitch Adapter – MAI NO We offer a microswitch, complete with adapter for NC securing the indicator. The microswitch is provided with double pole, single throw contacts, having both a normally NC NO open and a normally closed position. A special material has been employed in the construction of the adapter to provide Dimensions in mm reliable operation in the range of temperatures associated with standard operating conditions and during fuse operation. Microswitch and Adapter Type MAI Current Rating: AC 50/60Hz resistive load @ 250V RMS 4A AC 50/60Hz resistive load @ 127V RMS 6A DC, resistive load @ 110Vdc 0.7A DC DC, resistive load @ 30Vdc 2A DC Maximum Working Voltage: Contact-to-contact (RMS) 1000V Contact-to-contact (RMS) 1500V Maximum DC Volts: 110Vdc For additional information, visit www.edisonfuse.com 98 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section British & Canadian Standard Industrial Fuses Neozed Fuse Type D “Bottle” Fuse Amp Ratings: 2 to 100A Also suitable for use on 250Vdc systems. Voltage Ratings: 500Vac Amp Ratings: 2 to 63A Interrupting Rating: 100kA Voltage Ratings: 400Vac Agency Approvals: Interrupting Rating: 100kA “D” type fuses complying with DIN 49360 (time lag) 2 and G L DIN 49515, operating class / Catalog Dimension Contact Amp Color g g Number “D” Diameter D Rating Code 1 Catalog Dimension Ampere Color Figure 2NZ01 11 7.3 2 Pink Number “D” Rating Code Number 4NZ01 11 7.3 4 Brown 2D16 62 Pink 6NZ01 11 7.3 6 Green 4D16 64 Brown 10NZ01 11 8.5 10 Red 6D16 66 Green 16NZ01 11 9.7 16 Gray 10D16 8 10 Red 1 20NZ02 15 10.9 20 Blue 16D16 10 16 Gray 25NZ02 15 12.1 25 Yellow 20D16 12 20 Blue 35NZ02 15 13.3 35 Black 25D16 14 25 Yellow 50NZ02 15 14.5 50 White 2D27 62 Pink 63NZ02 15 15.9 63 Copper 4D27 64 Brown Dimensions - mm 6D27 66 Green D 10D27 8 10 Red 2 16D27 10 16 Gray 20D27 12 20 Blue 25D27 14 25 Yellow 35D33 16 35 Black 50D33 18 50 White 3 63D33 20 63 Copper 80D125 5 80 Silver D 4 1 100D125 7 100 Red Additional fuse links: Quick acting fuse links in body size D16, D27, D33 and CROSS REFERENCE D125 rated 2-100A. Reference number with suffix “Q”, i.e. 10D27Q. Voltage EDISON LINDNER SIEMENS JEAN MULLER rating 500V ultra fast-acting fuse links in body size D27, D33, and D125 2D16 594-0027 5SA2-11 gTN Dz/2 rated 6-100A. Reference number with suffix “R”, i.e., 10D27R. Notes: Gauge rings and keys can also be supplied. 4D16 594-0047 5SA2-21 gTN Dz/4 6D16 594-0067 5SA2-31 gTN Dz/6 10D16 594-0107 5SA2-51 gTN Dz/10 16D16 594-0167 5SA2-61 gTN Dz/16 Dimensions - mm 20D16 594-0207 5SA2-71 gTN Dz/20 25D16 594-0257 5SA2-81 gTN Dz/25 27.0 33.0 2D27 597-0027 5SB2-11 gLD 2/2 4D27 597-0047 5SB2-21 gLD 2/4 6D27 597-0067 5SB2-31 gLD 2/6 10D27 597-0107 5SB2-51 gLD 2/10 16D27 597-0167 5SB2-61 gLD 2/16 20D27 597-0207 5SB2-71 gLD 2/20 25D27 597-0257 5SB2-81 gLD 2/25 35D33 598-0357 5SB4-11 gLD 3/35 50D33 598-0357 5SB4-11 gLD 3/35 Figure 1 Figure 2 Figure 3 Figure 4 63D33 598-0357 5SB4-11 gLD 3/35 80D125 595-0807 5SC2-11 gLD 4/80 100D125 595-1007 5SC2-21 gLD 4/100 For additional information, visit www.edisonfuse.com 99 European Style Line Protection Fuses Catalog Number NH HRC Fuse Links Selectivity: 1 : 1.6 up to 500Vac G L Class of Operation: g /g Design - Insulator: Ceramic Amp Ratings: 2 to 1250A - Metal Parts: Corrosion-proof (top plate also Voltage Ratings: 500Vac galvanic plated) Rated Breaking Capacity: 120kA Contact Blades: Full contact and insulated blades Rated Frequency: 50 Hz available, silver-plated brass. Operating Frequency: 45 - 62 Hz Protection Type: IP00 according to DIN40050 Sizes: 000 to 4 Dimensions: DIN 43620 Standards/Approvals: IEC 60269, VDE0636, DIN 43620 Tests: VDE 0636/22 part 1 to 4, VDE mark and CE Constancy of Characteristics: Resistant of aging. Description: A square bodied range of industrial fuse On/Off Indicator: Patented spring dual indication links for a wide variety of applications. Mechanical Stress: Vibrations 7 up to 50Hz with 1 g, Packaging: 3's, except size 4 packed in 1 shocks with 5 g. Ordering Code: Rating/Type Size Category, e.g., Environmental: 100% recyclable, RoHS compliant, 63NHG000B cadmium and lead free across entire range, corrosion free screws. Dimensions - mm 2 1 2 1 2 3 4 a bc c De e e e f 1 3 4 Size a a (max) a a (rated) (±8) (rated) (rated) (max) (max) (max) (rated) (max) 000 78.5±1.5 54 45±1.5 49±1.5 15 35 10 2±0.5 41 21 16 68 00 78.5±1.5 54 45±1.5 49±1.5 15 35 11 2±0.5 48 30 25 6 15 0 125±2.5 68 62+3/-1.5 68+1.5/-3 15 35 11 2.5±0.5 48 30 25 6 15 01 135±2.5 75 62±2.5 68±2.5 15 40 11 2.5±0.5 48 30 25 6 15 1 135±2.5 75 62±2.5 68±2.5 20 40 11 2.5±0.5 53 52 25 6 15 02 150±2.5 75 62±2.5 68±2.5 20 48 11 2.5±0.5 53 52 25 6 15 2 150±2.5 75 62±2.5 68±2.5 25 48 11 2.5±0.5 61 60 25 6 15 03 150±2.5 75 62±2.5 68±2.5 25 60 11 2.5±0.5 61 60 25 6 15 3 150±2.5 75 62±2.5 68±2.5 32 60 11 3±0.5 75 70 25 6 18 4 200 84 80 90 50 85 10 3 102 87 -8 30 For additional information, visit www.edisonfuse.com 100 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section European Style Line Protection Fuses 500 G-gL 500 G- L g g g Dual Indicator Dual Indicator 500 G- L with voltage free 500 G- L with voltage free g g g g Amp Dual Indicator metal gripping lugs Amp Dual Indicator metal gripping lugs Size Rating Part Number Part Number Size Rating Part Number Part Number 2 2NHG000B 2NHG000BI 315 315NHG2B 315NHG2BI 2 355 355NHG2B 355NHG2BI 4 4NHG000B 4NHG000BI 6 6NHG000B 6NHG000BI 400 400NHG2B 400NHG2BI 10 10NHG000B 10NHG000BI 425 425NHG2B — 250 250NHG03B 250NHG03BI 16 16NHG000B 16NHG000BI 20 20NHG000B 20NHG000BI 03 315 315NHG03B 315NHG03BI 355 355NHG03B 355NHG03BI 25 25NHG000B 25NHG000BI 000 32 32NHG000B 32NHG000BI 400 400NHG03B 400NHG03BI 35 35NHG000B 35NHG000BI 425 425NHG3B — 40 40NHG000B 40NHG000BI 3 500 500NHG3B 500NHG3BI 50 50NHG000B 50NHG000BI 630 630NHG3B — 500 500NHG4G — 63 63NHG000B 63NHG000BI 80 80NHG000B 80NHG000BI 4 Slotted 630 630NHG4G — End Tags 800 800NHG4G — 100 100NHG000B 100NHG000BI 00 125 125NHG00B 125NHG00BI 1000 1000NHG4G — 160 160NHG00B 160NHG00BI 1250 1250NHG4G — 10 10NHG0B — 16 16NHG0B — * Denotes 440V 20 20NHG0B — 25 25NHG0B — 32 32NHG0B — 35 35NHG0B — 0 40 40NHG0B — 50 50NHG0B — 63 63NHG0B — 80 80NHG0B — 100 100NHG0B — 125 125NHG0B — 160 160NHG0B — 10 10NHG01B 10NHG01BI 16 16NHG01B 16NHG01BI 20 20NHG01B 20NHG01BI 25 25NHG01B 25NHG01BI 32 32NHG01B 32NHG01BI 35 35NHG01B 35NHG01BI 01 40 40NHG01B 40NHG01BI 50 50NHG01B 50NHG01BI 63 63NHG01B 63NHG01BI 80 80NHG01B 80NHG01BI 100 100NHG01B 100NHG01BI 125 125NHG01B 125NHG01BI 160 160NHG01B 160NHG01BI 200 200NHG1B 200NHG1BI 224 224NHG1B 224NHG1BI 1 250 250NHG1B 250NHG1BI 315 315NHG1B* — 355 355NHG1B* — 35 35NHG02B 35NHG02BI 40 40NHG02B 40NHG02BI 50 50NHG02B 50NHG02BI 63 63NHG02B 63NHG02BI 80 80NHG02B 80NHG02BI 02 100 100NHG02B 100NHG02BI 125 125NHG02B 125NHG02BI 160 160NHG02B 160NHG02BI 200 200NHG02B 200NHG02BI 224 224NHG02B 224NHG02BI 250 250NHG02B 250NHG02BI For additional information, visit www.edisonfuse.com 101 Canadian Standard Fuses Standard Dimension Fuses with 10kA Minimum Interrupting Rating; CSA Certified to C22.2 No. 59.1 Time-Delay One-Time Volts Ref. Amp Ratings Ctn. Qty. Volts Ref. Amp Ratings Ctn. Qty. Below 10A use ECSR 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 15, 20, 25, 30, 10 10, 12, 15, 20, 25, 30 10 35, 40, 45, 50, 60 35, 40, 45, 50, 60 600Vac CDSC* 70, 80, 90, 100 5 600Vac KOS** 70, 80, 90, 100 5 110, 125, 150, 175, 200, 110, 125, 150, 175, 200, 225, 250, 300, 350, 400, 1 225, 250, 300, 350, 400, 1 450, 500, 600 450, 500, 600 KON** 1, 2, 3, 4, 5, 6, 7, 8, 10, 12 Below 10A use ECNR 15, 20, 25, 30, 10 10, 12, 15, 20, 25, 30, 10 PONC*** (CSA ‘P’) 35, 40, 45, 50, 60 35, 40, 45, 50, 60 250Vac 70, 80, 90, 100 5 250Vac CDNC* 70, 80, 90, 100 5 110, 125, 150, 175, 200, 110, 125, 150, 175, 200, KON 225, 250, 300, 350, 400, 1 225, 250, 300, 350, 400, 1 450, 500, 600 450, 500, 600 Dimensions - in (mm) A B A B C D F Ferrule Design–1 through 60 Amps Knife Blade–70 through 600 Amps E Catalog Volts Number Amps Max. A Min. B Min. C DE F 1-30 2.0 (50.8) 0.56 (14.3) –– – – CDNC* 35-60 3.0 (76.2) 0.81 (20.6) –– – – 250Vac PONC*** 70-100 5.88 (149.4) – 1.0 (25.4) – 0.13 (3.2) 0.75 (19.1) KON** 110-200 7.3 (185.4) – 1.38 (34.9) 4.13 (104.8) 0.19 (4.8) 1.13 (28.6) 225-400 8.63 (219.2) – 1.88 (47.6) 4.63 (117.5) 0.25 (6.4) 1.63 (41.3) 450-600 10.38 (263.7) – 2.25 (57.2) 5.19 (131.8) 0.25 (6.4) 2 (50.8) 1-30 5.0 (127.0) 0.81 (20.6) –– – – 35-60 5.5 (139.7) 1.06 (27.0) –– – – 600Vac CDSC* 70-100 7.88 (200.2) – 1.0 (25.4) – 0.13 (3.2) 0.75 (19.1) KOS* 110-200 9.63 (244.6) – 1.38 (34.9) 6.13 (115.6) 0.19 (4.8) 1.13 (28.6) 225-400 11.63 (295.4) – 1.88 (47.6) 7.13 (118.1) 0.25 (6.4) 1.63 (41.3) 450-600 13.38 (339.9) – 2.25 (57.2) 8.19 (208.0) 0.25 (6.4) 2 (50.8) *CDSC & CDNC are CSA certified Type “D”. ** KON 1-12A and KOS 1-60A are not CSA Certified. *** PONC are CSA certified Type “P”. For additional information, visit www.edisonfuse.com 102 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Fast-Acting Fast-Acting Canadian Standard Fuses Canadian Standard Fuses Average Time-Current Curves Cat. No. CDNC 250Vac Cat. No. CDSC 600Vac AMP RATING AMP RATING 1,000 1,000 100 100 10 10 1 1 .1 .1 .01 .01 CURRENT IN AMPS CURRENT IN AMPS For additional information, visit www.edisonfuse.com 103 TIME IN SECONDS 10 10 15 30 60 100 100 200 400 600 1,000 10,000 TIME IN SECONDS 10 10 15 30 60 100 100 200 400 600 1,000 10,000 Time-Delay Canadian Standard Fuses Average Time-Current Curves Cat. No. PONC 250Vac Cat. No. KOS 600Vac AMP RATING AMP RATING 100 100 10 10 1 1 .1 0.1 .01 0.01 RMS SYMMETRICAL CURRENT IN AMPS RMS SYMMETRICAL CURRENT IN AMPS For additional information, visit www.edisonfuse.com 104 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting TIME IN SECONDS 20 15A 30A 60A 100 1,000 10,000 TIME IN SECONDS 20 15 A 20 A 30 A 35 A 60 A 100 100 A 200 A 400 A 600 A 1,000 10,000 UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section CAMaster HRC Fuse Holders Figure 1 Range: 30 (miniature), 30, 60, and 100A, 600Vac A range of fully shrouded HRC fuse holders having an advanced design. They incorporate a high level of innovation, with enhanced performance characteristics and comply with the requirements of: CSA C22.2 No. 39 as well as IEC 60269 and BS88 Standards. CAMaster Ratings Unique Cam Action The fuse carriers are fitted with a cam for ease of removal Fuse from the fuse bases allowing significantly improved contact Rating Details Reference Accommodated pressure between fuse carrier and fuse base contacts, with For a corresponding enhanced electrical performance level. 30 Amp HRCI-CA CM20CF --CIF21 This design overcomes a major problem of all existing dead Applications front style fuse holders manufactured worldwide, which 30 Amp For CM30CF ---H07C have to compromise between difficulties of fuse carrier 60 Amp HRCII CM60CF ---KO7C removal from base and contact pressure achieved. 100 Amp Applications CM100CF ---K07CR Lockable Safety Carriers A range of lockable safety carriers for the CAMaster fuse Accessories for CAMaster Units holder (Cat ref: LSC), are available. This distinct feature Fuse ensures isolation can be achieved allowing maintenance to Rating Details Reference Accommodated be carried out safely. 30 Amp 20BS For CM20CF Fixing Torque and Cable Size 30 Amp Back Stud 32BS For CM30CF 60/100 Amp 60/100BS For CM60/100CF Fuse Fixing Max Cable 660V Neon All NI – Ref Tightening Torques Size Indicator CM20CF 1.5N•m #2 30 Amp Security 20LSC For CM20CF CM30CF 1.5N•m #2 30 Amp Carrier 32LSC For CM30CF CM60CF 2.0N•m 2/0 60/100 Amp with Clip. 63/100LSC For CM60/100CF CM100CF 2.0N•m 2/0 30 Amp 20CML For CM20CF 30 Amp Solid Link 32CML For CM30CF 60/100 Amp 63/100CML For CM60/100CF Catalog Numbers Amps Mounting Edison Catalog Numbers Front CM20CF 30 Front/2-pole 2xCM20CF Back CM20CF + 2 off 20BS Front/Back CM20CF _ 1 off 20BS Front CM30CF 30 Back CM30CF + 2 off 30BS Front/Back CM30CF + 1 off 30BS Front CM60CF 60 Back CM60CF + 2 of 60/100BS Front/Back CM60CF + 1 of 60/100BS Front CM100CF 100* Back CM100CF + 2 of 60/100BS Front/Back CM100CF + 1 or 60/100BS *Uses compact Edison fuses. For additional information, visit www.edisonfuse.com 105 CAMaster HRC Fuse Holders Two/Three Pole Ganging The unique design of the carriers allows ganging to be readily achieved by the use of standard accessories. This provides improved safety related to isolation and protection of 2-Pole and 3-Pole electrical circuits by ensuring that the correctly related poles are removed at the same time. 2 4 1 3 (See Fig. 5.) Figure 2. Unique Conversion Capability Figure 5. Dual Two/Three-Pole Unique Conversion Capability Mounting Ganging. The standard fuse holders can be readily converted from front Capability connection to front/back stud and double-back stud connection The design as standard provides both bolted panel and DIN-Rail types at the point of use. This is achieved with a unique back stud mounting features. The DIN-Rail mounting facility for each of the accessory and the use of a screwdriver. See conversion sequence various dimensioned ratings is so designed as to give equal height in Fig. 2. Steps 1, 2 and 3 show removal of ferrule end and and depth above the DIN-Rail. insertion of back stud accessory to give the front/back stud connection type. This sequence repeated at the opposite end gives Hinged Internal Shields the double-back stud connection type shown in step 4. Non-removable full shrouding of live parts within the fuse base is provided by the use of hinged shields. The positive captive nature Unique Cable Termination of these ensures that they cannot be omitted during installation and The fuse holder’s unique cable terminations are designed for user are so designed that insertion of the fuse carrier can only be made convenience and to ensure long-term with them correctly positioned. reliability. They incorporate stainless steel saddles and hardened termination screws, Neon Indicator maintaining permanent cable clamping to Neon clip-in indicator accessories are profiled contact plates. The main electrical available providing clear location contact path between the cable and fuse link and status of fuses which have tag is shown highlighted. This permits the opened. (See Fig. 6.) use of high tightening torques without damage to cables or threads and provides resistance to high cable pull out forces. (See Fig. 3.) The fuse holders are supplied with the hardened termination screws backed out Figure 3. Unique ready for cable insertion, saving installation time. Cable Termination Hinged Captive Screws The fuse fixing screws to fuse carrier are held in captive hinges providing ease of fixing and preventing loss Figure 6. during installation. (See Fig. 4.) Neon Indicators. Circuit Identification The fuse carrier has a marking label for ease of circuit identification. Strip Length Marking The length of cable insulation that should be stripped off is shown Figure 4. Hinged on the side of the fuse base. Captive Screws Cross Reference Amps Mounting Edison Old Brush GEC Fusetek Front CM20CF CIF15F CIF15A CRS15H MF20F 30 Front/2-pole 2xCM20CF + GLP –– C2RS15H – Back CM20CF + 2 off 20BS CIF15BS CIF15B – – Front/Back CM20CF _ 1 off 20BS CIF15FBS CIF15C–– Front CM30CF C30AF CCH30A C30H or CRS30H MF30F 30 Back CM30CF + 2 off 30BS C20ABS CCH30B C30P MF30B Front/Back CM30CF + 1 off 30BS C30AFBS CCH30C C30PH MF30FB Front CM60CF C60BF CCK60A C60H or CRS60H MF60F 60 Back CM60CF + 2 of 60/100BS C60BBS CCK60B C60P MF60B Front/Back CM60CF + 1 of 60/100BS C60FBS CCK60C C60PH MF60FB Front CM100CF C100CF CCL100A C100H or CRS100H MF100F 100* Back CM100CF + 2 of 60/100BS C100CBS CCL100B C100P MF100B Front/Back CM100CF + 1 or 60/100BS C100CFBS CCL100C C100PH MF100FB *Edison uses compact fuse. 106 For additional information, visit www.edisonfuse.com Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section CAMaster HRC Fuse Holder Dimensions Dimensions - in (mm) Front/Back Stud and Double Back Stud Standard Front Connected Unit Connected Units F C A D E 44 C L OF DIN RAIL B G H øK øJ Rating Catalog Dimensions - in (mm) Amps Number CategoryAB C D E F G H J K 30 CM20CF HRCI-CA 1.0 (25.4) 3.69 (93.7) 2.36 (60) 0.13 (3.2) 0.64 (17.5) 2.60 (66) 2.29 (58) 1.13 (28.6) 0.47 (11.9) M6 30 CM30CF HRCII-C 1.25 (31.8) 4.63 (117.5) 2.36 (60) 0.13 (3.2) 0.69 (17.5) 2.60 (66) 2.92 (74) 1.13 (28.6) 0.47 (11.9) M6 60 CM60CF HRCII-C 1.40 (35.6) 4.93 (125) 2.36 (60) 0.19 (4.75) 0.65 (16.4) 3.41 (86.5) 3.14 (79.8) 1.13 (28.6) 0.47 (11.9) M8 100 CM100CF HRCII-MISC 1.40 (35.6) 4.93 (125) 2.36 (60) 0.19 (4.75) 0.65 (16.4) 3.41 (86.5) 3.14 (79.8) 1.13 (28.6) 0.47 (11.9) M8 Panel Drilling Plans, Viewed from Front of Panel C C L L C L 0.25" 0.25" 6.35mm 6.35mm 0.22" 0.22" 0.13" ø5.5mm 0.13" ø5.5mm 1.46" 3.2mm 1.46" 3.2mm 0.22" 37.0mm 1.14" 37.0mm ø5.5mm 29.0mm C C L L C L 1.46" 1.62" 37.0mm 0.75" 41.0mm 1.14" 0.13" 0.75" ø19mm 29.0mm 0.13" 3.2mm ø19mm 3.2mm 0.59" 0.25" ø15.0mm 0.25" 6.35mm 6.35mm CM20CF CM30CF CM60 + 100CF For additional information, visit www.edisonfuse.com 107 STRIP STRIP STRIP STRIP LOC SAFE HRC Fuse Holders For use with HRCI-CB Fuses. Suitable for Bolted Panel Mounting or DIN-Rail Mounting. Description Catalog Numbers SAFEloc fuse holders provide a simple range designed to accommodate the compact range of offset blade fuse to For use with HRCI-CB Fuses CSA C22.2 No. 106, HRCI-CB. The combination offers Edison Fuse significant savings in volume and cost as well as a reduction Rating Connection Catalog Numbers Accommodated in fitting time and power loss. Front C30F 30 Amp CIF06 Front-Back C30FBS Features Front C60F The fuse holders incorporate a unique slide/snap action 60 Amp EK Back C60BS carrier which eliminates the need for fuse carrier contacts. This provides positive, stress free fitting of fuse and locks SAFEloc fuse holders provide an easy method of protecting the fuse in position ensuring safe insertion and withdrawal a wide range of electrical equipment such as lighting, from the base. The resulting direct contact between fuse heating, motor and control equipment circuits, and offer blades and the plated base contacts provides lower watts significant savings on volume, cost, fitting time and power loss and increased reliability. The base contacts are fully loss. shrouded to protect personnel from direct contact electric shock. The shrouds utilize simple slide/snap action allowing access to the contact terminal screws. They are semi- Cross Reference captive within the base, reducing the risk of loss during Amps Mounting Edison GEC FUSETEK cabling. The fuse base, which consists of glass filled, high Front C30F CSC30H MD30F impact resistant thermoplastic polyester, incorporates a 30 Back C30BS CSC30P MD30B direct 35mm DIN-Rail mounting facility as well as single Front/Back C30FBS – MD30FB screw fixing. Front C60F CSC60H – 60 Back C60BS –– Tightening Torque Front/Back C60FBS –– To avoid a heat build up it is most important the cable terminal screws are screwed in tight and are holding the cable firmly. A tightening torque of 2.5 to 2.8 Newton meters (N•m) or 22 to 25lb-in is recommended. For additional information, visit www.edisonfuse.com 108 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section LOC SAFE HRC Fuse Holders Dimensions - in (mm) Dimensions - in (mm) Series Max. 2 Amps Number Cable mmAB C D E F G H J K 30 C30 16 1.0 (25.4) 3.0 (76.2) 1.83 (46.5) 0.09 (2.3) 0.63 (16.0) 1.54 (39.2) 2.27 (57.7) 0.67 (17.0) 0.38 (9.7) M6 60 C60 35 1.15 (29.1) 3.55 (90.0) 2.18 (55.0) 0.13 (3.3) 0.70 (17.7) 1.54 (39.2) 2.68 (67.9) 0.69 (17.5) 0.43 (11.0) M8 For additional information, visit www.edisonfuse.com 109 R-Rated Medium Voltage Fuses for Motor Circuits Medium voltage fuses for motor circuits offer the following Motor Starting Application user benefits: Application Procedure For any motor the fuse current rating is determined by • Performance complies with latest ANSI Standards magnitude and duration of starting current, except in a few • Dramatic reduction in energy let-through situations where the starting conditions are very light. The fuse current rating should be selected as follows. • Lower power dissipation Direct On-Line Starting • Low arc voltage during operation In the absence of specific information the starting current • Includes heavy duty striker to IEC 282-1 can usually be taken to be six times the motor full load current. The starting time will depend on the type of drive Advantages of Edison Motor Fuses but will be approximately as follows: During the full voltage starting of motors the fuse elements reach a considerably higher temperature than normally Pump Motors - 6 seconds occurs under continuous operation. The resulting expansion Mill Motors - 10 to 15 seconds and contraction of the fuse element can cause premature operation. The Edison motor circuit fuse incorporates Fan Motors - 60 seconds provisions in the design of the element to minimize this These are average values and the appropriate figures for effect and hence avoid the necessity of having to use a starting current and starting time for the actual installation much larger size of fuse. should be obtained wherever possible. Multiply the starting Edison fuses operate very quickly on heavy fault currents. current by 1.6 and using this value of current and the This results from the steepness of the time-current starting time (it is recommended that a minimum time of 8 characteristic, which also facilitates coordination with the seconds be adopted) plot this point on the minimum melting other components of the circuit. time-current characteristics of the fuses. The correct current rating of fuse is then chosen as being the one immediately Lower power dissipation helps to ensure low temperature to the right of the point so plotted. The chosen fuse must rise of, for example, multi-tier starters. also have a current rating of at least 1.3 times the full-load Switching (arc) voltages are appreciably less than permitted current of the associated motor. values and fall with lower values of system voltage. Thus, The rating thus chosen will be adequate for normal the 5.5kV fuses are equally suitable for use in 4.8kV, applications where the associated motor is not started more 4.16kV and 2.4kV circuits. than twice in any given period of one hour. For applications The superior low-overcurrent breaking performance is of involving more frequent starting duties, a greater derating advantage whether or not the striker is used to open the factor must be applied as shown in the following table. contactor. Derating Factor “R” Rating The R-Rated motor circuit fuses should be selected to Maximum of starts per hour Derating factor coordinate with the motor and controller to provide 2 1.6 short-circuit protection. 4 1.7 The actual “R” rating signifies a 20 second opening time at 8 2.0 100 times the “R” rating of the fuse. 16 2.2 For example: The figures in the above table apply only when the Minimum Melting 2R fuse opens in 20 seconds at 200A. Time-Current Characteristic Curve is used. 12R fuse opens in 20 seconds at 1200A. For applications involving more frequent starting duty than 16 times per hour or where unusual duty cycles are involved consult Edison Customer Satisfaction for advice. Assisted Starting A similar method of fuse selection may be used as for direct-on-line starting (see above) but it must be noted that the normal running current of the motor is likely to be closer in value to the nominal current rating of the fuse than for direct-on-line applications. The rating of fuse chosen will need to be appreciably greater than the motor running current to allow for restricted cooling inside control gear cubicles, particularly where multi-tier starters are involved. In case of doubt refer to Edison Customer Satisfaction for further guidance. For additional information, visit www.edisonfuse.com 110 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section R-Rated Medium Voltage Fuses For Motor Circuits R-Rated Fuses for Motor Circuit Protection Agency Information: UL Recognized: 2540Vac — JCK, JCG, JCH, JCK, JCK-A, 5080Vac — JCL, JCL-A, UL Recognized (Guide JCK-A, JCK-B, JCL, #MSSS2, File #E96676). JCL-A, JCL-B, JCR-A, Features and Benefits & JCR-B • Physically dimensioned for retrofitting in existing hardware • Open fuse indicator for ease in troubleshooting Specifications ® • Available with optional Cutler Hammer hookeye for ease of Description: Indoor/enclosure insertion and removal R-Rated medium voltage, • Classified as back-up fuses for current-limited protection of current-limiting fuses for motor medium voltage motor controllers circuit protection. Dimensions: See Dimensions Typical Applications illustrations. • Medium Voltage Motor Controllers Ratings: Volts: — 2.4-7.2kV (See Catalog Numbers table for details) Amps: — 25-450A (See Catalog Numbers table for details) IR: — 50kA Sym — 80kA ASYM — See Catalog Numbers table for details Dimensions - mm (in) Figure 1 INDICATOR Showing Fuse is Open 0.38" (9.5mm) C INDICATOR A Showing Fuse is Open B Figure 2 Figure 3 For additional information, visit www.edisonfuse.com 111 R-Rated Medium Voltage Fuses for Motor Circuits R-Rated Fuses for Motor Circuit Protection Catalog Numbers: R-Rated; Indoor/Enclosure Catalog Amp Maximum Dimensions - in (mm)* Max Int. Cap. Amps Min Int. Cap. Numbers Ratings Design VoltageAB C Construction Amps (Asym.) (Sym.) Amps (Sym.) 2400V (See Figure 1) JCK-2R 70 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 165 JCK-3R 100 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 220 JCK-4R 130 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 320 JCK-5R 150 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 410 JCK-6R 170 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 480 JCK-9R 200 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 720 JCK-12R 230 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 970 JCK-18R 390 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,430 JCK-24R 450 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,880 2400V — With Westinghouse Ampguard Hookeye (See Figure 1) JCK-A-2R 70 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 165 JCK-A-3R 100 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 220 JCK-A-4R 130 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 320 JCK-A-5R 150 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 410 JCK-A-6R 170 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 480 JCK-A-9R 200 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 720 JCK-A-12R 230 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 970 JCK-A-18R 390 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,430 JCK-A-24R 450 2540 11.24 (285.5) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,880 2400V — Bolt-On (See Figures 2 & 3) JCK-B-30 25 2540 14.18 (360.2) 12.81 (325.4) - Single 80,000 50,000 90 JCK-B-2R 70 2540 14.18 (360.2) 12.81 (325.4) - Single 80,000 50,000 170 JCK-B-3R 100 2540 14.18 (360.2) 12.81 (325.4) - Single 80,000 50,000 245 JCK-B-4R 130 2540 14.18 (360.2) 12.81 (325.4) - Single 80,000 50,000 340 JCK-B-5R 150 2540 14.18 (360.2) 12.81 (325.4) - Single 80,000 50,000 430 JCK-B-6R 170 2540 14.18 (360.2) 12.81 (325.4) - Single 80,000 50,000 500 JCK-B-9R 200 2540 14.18 (360.2) 12.81 (325.4) - Single 80,000 50,000 1,000 JCK-B-12R 230 2540 14.18 (360.2) 12.81 (325.4) - Single 80,000 50,000 1,250 JCK-B-18R 390 2540 14.18 (360.2) 12.81 (325.4) 3.56 (90.4) Double 80,000 50,000 1,700 JCK-B-24R 450 2540 14.18 (360.2) 12.81 (325.4) 3.56 (90.4) Double 80,000 50,000 1,210 2400V — Hermetically Sealed, For Use with Ampguard Motor Starters (See Figure 1) JCH-30 25 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 90 JCH-2R 70 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 170 JCH-3R 100 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 245 JCH-4R 130 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 340 JCH-5R 150 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 430 JCH-6R 170 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 500 JCH-9R 200 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 1,000 JCH-12R 230 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 1,250 JCH-18R 390 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,700 JCH-24R 450 2540 10.81 (275.6) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 2,100 4800V (See Figure 1) JCL-2R 70 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 165 JCL-3R 100 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 220 JCL-4R 130 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 320 JCL-5R 150 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 410 JCL-6R 170 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 480 JCL-9R 200 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 720 JCL-12R 230 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 970 JCL-18R 390 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,430 JCL-24R 450 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,880 • See previous page Figure 2 for single construction and Figure 3 for double construction information. Recommended fuseclips: see page 118 - 1A0065, A3354730, 9078A67G04. For additional information, visit www.edisonfuse.com 112 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section R-Rated Medium Voltage Fuses For Motor Circuits R-Rated Fuses for Motor Circuit Protection Catalog Numbers: R-Rated; Indoor/Enclosure Catalog Amp Maximum Dimensions - in (mm) Max Int. Cap. Amps Min Int. Cap. Numbers Ratings Design VoltageAB C Construction Amps (Asym. (Sym.) Amps (Sym.) 4800V — With Westinghouse Ampguard Hookeye (See Figure 1) JCL-A-2R 70 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 165 JCL-A-3R 100 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 220 JCL-A-4R 130 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 320 JCL-A-5R 150 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 410 JCL-A-6R 170 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 480 JCL-A-9R 200 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 720 JCL-A-12R 230 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 970 JCL-A-18R 390 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,430 JCL-A-24R 450 5080 15.76 (400.3) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,880 4800V — Bolt-On (See Figures 2 & 3) JCL-B-30 30 5080 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 95 JCL-B-2R 70 5080 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 180 JCL-B-3R 100 5080 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 270 JCL-B-4R 130 5080 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 350 JCL-B-5R 150 5080 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 450 JCL-B-6R 170 5080 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 540 JCL-B-9R 200 5080 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 700 JCL-B-12R 230 5080 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 1,000 JCL-B-18R 390 5080 19.25 (488.9) 17.88 (454.1) 3.31 (84.1) Double 80,000 50,000 1,450 JCL-B-24R 450 5080 19.25 (488.9) 17.88 (454.1) 3.31 (84.1) Double 80,000 50,000 2,000 4800V — Hermetically Sealed, For Use with Ampguard Motor Starters (See Figure 1) JCG-30 30 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 95 JCG-2R 70 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 180 JCG-3R 100 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 270 JCG-4R 130 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 350 JCG-5R 150 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 450 JCG-6R 170 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 540 JCG-9R 200 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 700 JCG-12R 230 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 1,000 JCG-A-18R 390 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,450 JCG-A-24R 450 5080 15.91 (404.1) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 2,000 7200V — With Ampguard Hookeye (See Figure 1) JCR-A-2R 70 8300 15.85 (402.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 160 JCR-A-3R 100 8300 15.85 (402.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 250 JCR-A-4R 130 8300 15.85 (402.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 325 JCR-A-5R 150 8300 15.85 (402.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 390 JCR-A-6R 170 8300 15.85 (402.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 500 JCR-A-9R 200 7200 15.85 (402.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 750 JCR-A-12R 230 7200 15.85 (402.6) 3.0 (76.2) 3.0 (76.2) Single 80,000 50,000 1,000 JCR-A-18R 390 7200 15.85 (402.6) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 1,450 JCR-A-24R 450 7200 15.85 (402.6) 3.0 (76.2) 3.0 (76.2) Double 80,000 50,000 2,500 7200V — Bolt-On (See Figures 2 & 3) JCR-B-2R 70 8300 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 160 JCR-B-3R 100 8300 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 250 JCR-B-4R 130 8300 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 325 JCR-B-5R 150 8300 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 390 JCR-B-6R 170 8300 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 500 JCR-B-9R 200 7200 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 750 JCR-B-12R 230 7200 19.25 (488.9) 17.88 (454.1) - Single 80,000 50,000 1,000 JCR-B-18R 390 7200 19.25 (488.9) 17.88 (454.1) 3.31 (84.1) Double 80,000 50,000 1,450 JCR-B-24R 450 7200 19.25 (488.9) 17.88 (454.1) 3.31 (84.1) Double 80,000 50,000 2,500 Recommended fuseclips: see page 118 - 1A0065, A3354730, 9078A67G04. For additional information, visit www.edisonfuse.com 113 R-Rated Medium Voltage Fuses For Motor Circuits Motor Efficiency ---------- 90% Run Up Time ------ 10 Secs. Application for HV Motor Circuit Fuses Motor Power Factor ----- 0.9 Starting Method -- Full Voltage The following table is a general guide only based on a number of assumptions regarding the motor duty Starting Current ---------- 6 x FLA Min. Fuse Size---- 1.3 x FLA application which are listed below. The application tables Starts/Hour ---------------- Max of 2/Hour are based on the following assumptions: 2.4kV 4.16kV 4.8kV FLA FUSE FLA FUSE FLA FUSE Hp Amps “R” Amps Amps “R” Amps Amps “R” Amps 75 17 2R 70 –––––– 100 22 2R 70 –––––– 125 28 3R 70 16 2R 70 ––– 150 33 3R 100 19 2R 70 17 2R 70 200 44 4R 130 26 3R 100 22 2R 70 250 55 6R 170 32 3R 100 28 3R 100 300 67 6R 170 38 4R 130 33 3R 100 350 78 9R 170 45 4R 130 39 4R 130 400 89 9R 200 45 4R 130 44 4R 130 500 111 12R 230 64 6R 170 55 6R 170 600 133 18R 390 77 9R 200 67 6R 170 700 155 18R 390 90 9R 200 78 9R 200 800 177 18R 390 102 9R 230 89 9R 200 900 200 18R 390 115 12R 230 100 9R 200 1000 222 24 450 128 18R 390 111 12R 230 1100 244 24R 450 141 18R 390 122 12R 230 1200 266 24R 450 154 18R 390 133 18R 390 1400 311 30R 450 179 18R 390 155 18R 390 1600 355 36R 500 205 18R 390 177 18R 390 1800 399 40R 600 230 24R 450 200 18R 390 1900 422 40R 600 243 24R 450 211 18R 390 2000 444 40R 600 256 24R 450 222 24R 450 2200 488 48R 650 282 30R 450 244 24R 450 2400 ––– 307 30R 450 266 24R 450 2600 ––– 333 36R 500 288 30R 450 2800 ––– 358 36R 500 311 30R 450 3000 ––– 384 36R 500 333 36R 500 3500 ––– 448 40R 600 388 36R 500 4000 –––––– 444 40R 600 4500 –––––– 500 48R 650 For additional information, visit www.edisonfuse.com 114 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section 5.5kV E-Rated Medium Voltage Fuses E-Rated Power Fuses Having Full Range Clearing Capability for Medium Voltage Transformer Circuit Protection 5.5kV Catalog Numbers MV055 Min Max Dimensions (in)* Catalog Amp Melt Clear Clip Specifications 2 2 Numbers Rating ItI t Length Dia. Center Barrels Description: E-rated medium, voltage current-limiting fuses MV055F1CAX5E 5 180 2,400 MV055F1CAX7E 7 850 8,000 for transformer and feeder protection. MV055F1CAX10E 10 850 8,000 Dimensions: See Catalog Numbers table. MV055F1CAX15E 15 2,070 11,000 Construction: Silver ribbon element surrounded by silica MV055F1CAX20E 20 2,370 23,000 2˝ MV055F1CAX25E 25 4,650 31,000 filler housed in a fiberglass tube and plated endcaps. An MV055F1CAX30E 30 9,490 45,000 epoxy paint protects the fuse tube from the surrounding MV055F1CAX40E 40 9,490 45,000 environment. MV055F1CAX50E 50 13,600 90,000 MV055F1CAX65E 65 30,700 181,000 Ratings: MV055F1DAX10E 10 850 8,000 15.75 3 12 1 Volts: — 5.5kV MV055F1DAX15E 15 2,070 12,000 1 Amps: — 5-450A MV055F1DAX20E 20 2,370 23,000 MV055F1DAX25E 25 4,650 31,000 IR: — 50kA Sym. Max 15.75˝ 12 MV055F1DAX30E 30 9,490 45,000 Agency Information: Meets E requirements per ANSI MV055F1DAX40E 40 9,490 45,000 MV055F1DAX50E 50 13,600 90,000 C37.46, Meets full range requirements per ANSI C37.40. MV055F1DAX65E 65 30,700 181,000 MV055F1DAX80E 80 54,600 270,000 Features and Benefits 3˝ MV055F1DAX100E 100 116,200 580,000 • MV055 Standard clip center distance of 12 inches with 2 MV055F1DAX125E 125 167,400 600,000 15.75 3 12 1 and 3 inch barrel diameters for retrofitting in existing MV055F1DAX150E 150 218,700 786,000 MV055F1DAX175E 175 227,900 1,100,000 hardware MV055F1DAX200E 200 297,600 1,520,000 • Open fuse indicator for ease in troubleshooting MV055F2DAX250E 250 669,600 2,400,000 15.75 3 12 2 • Full range rating with 50KA Interrupting Rating MV055F2DAX300E 300 874,800 3,149,000 2 • Double pulsed at 90% of minimum I t to establish 2 MV055F2DAX350E 350 911,600 4,376,000 MV055F2DAX400E 400 1,190,400 6,071,000 manufacturing reliability MV055F2DAX450E 450 1,555,000 9,796,000 1” = 25.4mm MV055 Typical Applications • 5.0kV Transformer Primary Protection • 5.0kV Feeder Circuit Protection • 5.0kV Voltage Switches • 5.0kV Metal-enclosed Switchgear CROSS REFERENCE NEW EDISON OLD EDISON MERSEN (old/new) WESTINGHOUSE GE (old/new) MV055F1CAX — A550X – 1B/A055F1CORO—— MV055F1DAX 5.5FFNHA or K A550X – 1F/A055F1DORO 151D978G01 thru G08 9F60FJDxxx/9F62DCBxxx MV055F1DAX 5.5BFNHA — 5HLExxxE – 1 — MV055F2DAX 5.5BFNHK A550X – 1/A055F2DORO 151D978G11 thru G13 9F60GHC (250-400) For additional information, visit www.edisonfuse.com 115 5.5kV E-Rated Medium Voltage Fuses E-Rated Medium Voltage Fuses for Transformer and Feeder Protection Time-Current Characteristics–Min. Melt Time-Current Characteristics–Total Clear AMP RATING AMP RATING 100 100 10 10 1 1 .1 .1 .01 .01 CURRENT IN AMPS CURRENT IN AMPS Dimensions - in MV055F1CAX10E to 65E 15.75" 14.74" 2.03" 0.38" 0.63" 2.00" 1.25" 1.25" 12.00" Position of Open Fuse Clip Center Indicator After Operating For additional information, visit www.edisonfuse.com 116 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting TIME IN SECONDS 10 5A 7A 10A 15A 20A 25A 30A 40A 100 50A 65A 1000 7000 TIME IN SECONDS 10 5A 7A 10A 15A 20A 25A 30A 100 40A 50A 65A 1000 7000 Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section 5.5kV E-Rated Medium Voltage Fuses E-Rated Medium Voltage Fuses for Transformer and Feeder Protection Time-Current Characteristics–Min. Melt Time-Current Characteristics–Total Clear 1000 1000 100 100 10 10 1 1 .1 .1 DOUBLE BARREL DOUBLE BARREL FUSE ASSY. FUSE ASSY. SINGLE BARREL SINGLE BARREL FUSE ASSY. FUSE ASSY. .01 .01 CURRENT IN AMPERES CURRENT IN AMPERES Dimensions - in MV055F1DAX10E to 200E MV055F2DAX250E to 450E 15.75" 14.74" 2.40" 0.38" 0.63" 3.00" 1.25" 1.25" Position of Open Fuse 12.00" Indicator After Operating Clip Center For additional information, visit www.edisonfuse.com 117 TIME IN SECONDS 10 10A 15A 20A 25A 30A 40A 50A 100 65A 80A 100A 125A 150A 175A 200A 250A 300A 350A 400A 1000 450A 10000 100000 TIME IN SECONDS 10 10A 15A 20A 25A 30A 40A 100 50A 65A 80A 100A 125A 150A 175A 200A 250A 300A 350A 1000 400A 450A 10000 100000 5.5kV E-Rated Medium Voltage Fuses E-Rated Medium Voltage Fuses for Transformer and Feeder Protection Maximum Peak Let-Through Current Curves Max. Peak Arc Voltage for E-Rated Full Range Power Fuse B 100 50 450A 400A 350A 300A 250A 200A 175A 125A 100A 150A 40 80A 65A 10 50A 40A 30A 25A 20A 15A 07&10A 30 05A 1 20 A 10 .1 .1 1 10 AVAILABLE CURRENT IN KILOAMPERES (RMS Symmetrical) 0 CIRCUIT VOLTAGE (kV) Recommended Fuse Clips for Medium Voltage Fuses Part Fuse Clip Dimensions - in No. Diameter AB C D E F G A3354710 2 inches 3.75 1.98 2.01 1.19 4.54 1.51 0.40 A F A3354730 3 inches 4.14 2.45 3.01 1.19 5.64 1.51 0.40 C G Fuseclips are for single barrel applications only. B E D 1A0065 9078A67G04 270303 3˝ Diameter Clip 3˝ Diameter Clip DIN Fuseclip A 0.99" 25.0mm 4.06" 103mm 0.43" 10.8mm A 2 Cup assemblies per package. Dimensions shown are for reference only. For additional information, visit www.edisonfuse.com 118 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting MAXIMUM LET-THRU (Peak Kiloamperes) 100 MAXIMUM PEAK ARC VOLTAGE (kV) 0 5 10 15 20 Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section 15.5kV E-Rated Medium Voltage Fuses E-Rated Power Fuses Having Full Range Clearing Capability for Medium Voltage Transformer Circuit Protection 15.5kV Catalog Numbers MV155 Min Max Dimensions* Catalog Amp Melt Clear Clip 2 2 Numbers Rating ItI t Length Dia. Center Barrels Specifications MV155F1CBX5E 5 180 2,900 18.75 15 1 Description: E-rated medium, voltage current-limiting fuses MV155F1CBX7E 7 850 8,000 for transformer and feeder protection. MV155F1CBX10E 10 850 8,000 MV155F1CBX15E 15 2,070 12,000 1˝ Dimensions: See Catalog Numbers table. MV155F1CBX20E 20 2,370 23,000 Construction: Silver ribbon element surrounded by silica MV155F1CBX25E 25 4,650 31,000 filler housed in a fiberglass tube and plated endcaps. An MV155F1CBX30E 30 9,490 45,000 epoxy paint protects the fuse tube from the surrounding MV155F1DBX10E 10 850 8,000 18.75 3 15 1 1 MV155F1DBX15E 15 2,070 12,000 environment. MV155F1DBX20E 20 2,370 23,000 Ratings: 18.75˝ 15 MV155F1DBX25E 25 4,650 31,000 MV155F1DBX30E 30 9,490 45,000 Volts: — 15.5kV MV155F1DBX40E 40 9,490 45,000 Amps: — 5-200A MV155F1DBX50E 50 13,600 90,000 IR: — 50kA Sym. Max MV155F1DBX65E 65 30,700 181,000 MV155F1DBX80E 80 54,600 270,000 Agency Information: Meets E requirements per ANSI MV155F1DBX100E 100 116,200 600,000 C37.46, Meets full range requirements per ANSI C37.40. MV155F2DBX125E 125 123,000 677,000 18.75 3˝ 15 2 2˝ MV155F2DBX150E 150 218,700 1,287,000 2 MV155F2DBX175E 175 314,700 1,689,000 Features and Benefits MV155F2DBX200E 200 465,100 2,405,000 • MV155 Standard clip center distance of 15 and 18 inches MV155F1DCX65E 65 30,700 181,000 21.75 3 18 1 with 2 and 3 inch barrel diameters for retrofitting in existing 1 MV155F1DCX80E 80 54,600 270,000 hardware MV155F1DCX100E 100 116,200 600,000 • Open fuse indicator for ease in troubleshooting MV155F2DCX125E 125 123,000 677,000 21.75 3 18 2 21.75˝ 18 MV155F2DCX150E 150 218,700 1,287,000 • Full range rating with 50kA Interrupting Rating 2 2 MV155F2DCX175E 175 314,700 1,689,000 • Double pulsed at 90% of minimum I t to establish MV155F2DCX200E 200 465,100 2,405,000 manufacturing reliability *1” = 25.4mm. MV155 Typical Applications • 15.0kV Transformer Primary Protection • 15.0kV Feeder Circuit Protection • 15.0kV Voltage Switches • 15.0kV Metal-enclosed Switchgear CROSS REFERENCE NEW EDISON OLD EDISON MERSEN (old/new) WESTINGHOUSE GE (old/new) MV155F1CBX — A1550X – 1B/A155F1CORO —— MV155F1DBX 15.5FFVHA A1550X – 1F/A155F1DORO (10-50E) 15HLE–xxxE 9F60FMH/9F62DDD MV155F2DBX 15.5FFVHK—— — MV155F1DCX — A1550X – 1D/A155F1DORO (65-100E) —— MV155F2DCX — A1550X – 1D/A155F2DORO (125-200E) —— For additional information, visit www.edisonfuse.com 119 15.5kV E-Rated Medium Voltage Fuses E-Rated Medium Voltage Fuses for Transformer and Feeder Protection Time-Current Characteristics – Min. Melt Time-Current Characteristics –Total Clear AMP RATING AMP RATING 100 100 10 10 1 1 .1 .1 .01 .01 CURRENT IN AMPS CURRENT IN AMPS Dimensions - in MV155F1CBX5E to 30E 18.75" 17.74" 2.03" 0.38" 0.63" 2.00" 1.25" 15.00" 1.25" Position of Open Fuse Clip Center Indicator After Operation For additional information, visit www.edisonfuse.com 120 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting TIME IN SECONDS 10 5A 7A 10A 15A 20A 25A 30A 100 1000 7000 TIME IN SECONDS 10 5A 7A 10A 15A 20A 25A 30A 100 1000 7000 Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section 15.5kV E-Rated Medium Voltage Fuses E-Rated Medium Voltage Fuses for Transformer and Feeder Protection Time-Current Characteristics – Min. Melt Time-Current Characteristics –Total Clear 1000 1000 100 100 10 10 1 1 .1 .1 DOUBLE BARREL FUSE ASSY. DOUBLE BARREL FUSE ASSY. SINGLE BARREL FUSE ASSY. SINGLE BARREL FUSE ASSY. .01 .01 10 CURRENT IN AMPERES CURRENT IN AMPERES Dimensions - in MV155F1DBX10E to 100E MV155F1DCX65E to 100E 18.75" 21.75" 20.74" 17.74" 2.40" 2.40" 0.38" 0.38" 0.63" 0.63" 3.00" 3.00" 1.25" 1.25" 1.25" 1.25" 3.38" Position of Open Fuse Position of Open Fuse 15.00" 18.00" Indicator After Indicator After Clip Center Clip Center Operating Operating MV155F2DBX125E to 200E MV155F2DCX125E to 200E For additional information, visit www.edisonfuse.com 121 TIME IN SECONDS 10 10A 15A 20A 25A 30A 40A 50A 100 65A 80A 100A 125A 150A 175A 200A 1000 10000 20000 TIME IN SECONDS 10A 15A 20A 25A 30A 40A 100 50A 65A 80A 100A 125A 150A 175A 200A 1000 10000 20000 15.5kV E-Rated Medium Voltage Fuses E-Rated Medium Voltage Fuses for Transformer and Feeder Protection Max. Peak Let-through Current Curves Maximum Peak Arc Voltage for E-Rated Full Range Power Fuse B 100 50 200A 175A 150A 125A 100A 80A 40 65A 50A 30&40A 10 25A 20A 15A 07&10A 30 05A 1 20 A 10 .1 .1 1 10 AVAILABLE CURRENT IN KILOAMPERES (RMS Symmetrical) 0 CIRCUIT VOLTAGE (kV) Recommended Fuse Clips for Medium Voltage Fuses Part Fuse Clip Dimensions - in No. Diameter AB C D E F G A3354710 2 inches 3.75 1.98 2.01 1.19 4.54 1.51 0.40 A F A3354730 3 inches 4.14 2.45 3.01 1.19 5.64 1.51 0.40 C G Fuseclips are for single barrel applications only. B E D 1A0065 9078A67G04 270303 3˝ Diameter Clip 3˝ Diameter Clip DIN Fuseclip A 0.99" 25.0mm 4.06" 103mm 0.43" 10.8mm A 2 Cup assemblies per package. Dimensions shown are for reference only. For additional information, visit www.edisonfuse.com 122 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting MAXIMUM LET-THROUGH (Peak Kiloamperes) 100 MAXIMUM PEAK ARC VOLTAGE (kV) 0 5 10 15 20 Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section 3.6kV – 38kV Potential Transformer Fuses AB, AM and CAV Ratings: Volts: — 5.5-38kV Amps: — 0.5-15A IR: — 40kA-80kA Sym. — See Catalog Numbers table for details Features and Benefits • Sized for retrofitting in existing hardware • Space saving size Typical Applications Specifications • Primary protection of medium voltage potential Description: Indicating and non-indicating E-Rated medium transformers voltage, current-limiting fuses for potential and small power • Primary protection of small medium voltage service transformers. transformers Dimensions: See Catalog Numbers table. • Primary protection of small medium voltage control Dimension Illustration on the following page transformers Catalog Numbers: E-Rated PT Fuses, Indicating & Non-Indicating 3.6kV; E-Rated PT Fuse; Non-indicating Catalog Amp Rated Dimensions Spare Parts Number Rating Voltage IR RMS Sym. Length Diameter Clip Centers (Clips) 3.6CAV2 2 3.6kV 50kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 3.6ABWNA3.15 3.15 3.6kV 50kA 5.6 (142.2) 1 (25.4) 4.42 (112.2) A3354705 3.6ABWNA6.3 3.15 3.6kV 50kA 5.6 (142.2) 1 (25.4) 4.42 (112.2) A3354705 3.6ABCNA3.15 3.15 3.6kV 50kA 7.69 (195.3) 1 (25.4) 6.51 (165.3) A3354705 3.6ABCNA6.3 6.3 3.6kV 50kA 7.69 (195.3) 1 (25.4) 6.51 (165.3) A3354705 3.6ABCNA10 10 3.6kV 50kA 7.69 (195.3) 1 (25.4) 6.51 (165.3) A3354705 5.5kV; E-Rated PT Fuse; Indicating & Non-indicating Catalog Amp Rated Dimensions Spare Parts Number Rating Voltage IR RMS Sym. Length Diameter Clip Centers (Clips) 5.5CAVH0.5E 0.5 5.5kV 63kA 7.375 (187.3) 1.63 (41.3) 6.18 (156.84) 1A0835 5.5CAVH1E 1 5.5kV 63kA 7.375 (187.3) 1.63 (41.3) 6.18 (156.84) 1A0835 5.5CAVH2E 2 5.5kV 63kA 7.375 (187.3) 1.63 (41.3) 6.18 (156.84) 1A0835 5.5CAV15E 15 5.5kV 63kA 7.375 (187.3) 1.63 (41.3) 6.18 (156.84) 1A0835 5.5ABWNA0.5E 0.5 5.5kV 50kA 5.6 (142.2) 1 (25.4) 4.42 (112.2) A3354705 5.5ABWNA1E 1 5.5kV 50kA 5.6 (142.2) 1 (25.4) 4.42 (112.2) A3354705 5.5ABWNA2E 2 5.5kV 50kA 5.6 (142.2) 1 (25.4) 4.42 (112.2) A3354705 5.5ABWNA3E 3 5.5kV 50kA 5.6 (142.2) 1 (25.4) 4.42 (112.2) A3354705 5.5ABWNA5E 5 5.5kV 50kA 5.6 (142.2) 1 (25.4) 4.42 (112.2) A3354705 5.5AMWNA0.5E 0.5 5.5kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 5.5AMWNA1.0E 1 5.5kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 5.5AMWNA2.0E 2 5.5kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 5.5AMWNA3.0E 3 5.5kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 5.5AMWNA4.0E 4 5.5kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 5.5AMWNA5.0E 5 5.5kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 Type CAVH are fitted with a striker pin for indication 7.2kV; E-Rated PT Fuse; Non-indicating Catalog Amp Rated Dimensions Spare Parts Number Rating Voltage IR RMS Sym. Length Diameter Clip Centers (Clips) 7.2CAV2 2 7.2kV 63kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 7.2CAV4 4 7.2kV 63kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 7.2CAV6 6 7.2kV 63kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 7.2CAV10 10 7.2kV 63kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 7.2ABWNA3.15 3.15 7.2kV 45kA 5.6 (142.2) 1 (25.4) 4.42 (112.2) A3354705 7.2ABWNA6.3 6.3 7.2kV 45kA 5.6 (142.2) 1 (25.4) 4.42 (112.2) A3354705 7.2ABCNA3.15 3.15 7.2kV 45kA 7.69 (195.3) 1 (25.4) 6.51 (165.3) A3354705 7.2ABCNA6.3 6.3 7.2kV 45kA 7.69 (195.3) 1 (25.4) 6.51 (165.3) A3354705 7.2AMWNA0.5E 0.5 7.2kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 7.2AMWNA1.0E 1 7.2kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 7.2AMWNA2.0E 2 7.2kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 7.2AMWNA3.0E 3 7.2kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 7.2AMWNA4.0E 4 7.2kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 7.2AMWNA5.0E 5 7.2kV 50kA 5.6 (142.2) 0.81 (20.6) 4.79 (121.6) 1A1837 For additional information, visit www.edisonfuse.com 123 3.6kV – 38kV Potential Transformer Fuses Dimension Illustration Fuseclips 0.21" 0.5" Length 5.3mmø 12.7mm 0.34" 8.6mm 0.68" Clip Centers 17.3mm 1" 25.4mm Diameter 1.37" 34.8mm Part No. A3354705 For 1” diameter potential transformer fuses. Catalog Numbers: E-Rated PT Fuses, Indicating & Non-Indicating 12kV; E-Rated PT Fuse; Non-indicating Catalog Amp Rated Dimensions Spare Parts Number Rating Voltage IR RMS Sym. Length Diameter Clip Centers (Clips) 12CAV2 2 12kV 40kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 12ABCNA3.15 3.15 12kV 45kA 7.69 (195.3) 1 (25.4) 6.51 (165.3) A3354705 15.5kV; E-Rated PT Fuse; Indicating & Non-indicating Catalog Amp Rated Dimensions Spare Parts Number Rating Voltage IR RMS Sym. Length Diameter Clip Centers (Clips) 15.5CAV(H)0.5E 0.5 15.5kV 80kA 12.87 (326.9 1.63 (41.3) 1.2 (30.5) 1A0835 15.5CAV(H)1E 1 15.5kV 80kA 12.87 (326.9 1.63 (41.3) 1.2 (30.5) 1A0835 15.5CAV(H)2E 2 15.5kV 80kA 12.87 (326.9 1.63 (41.3) 1.2 (30.5) 1A0835 15.5CAV3E 3 15.5kV 80kA 12.87 (326.9 1.63 (41.3) 1.2 (30.5) 1A0835 15.5CAV5E 5 15.5kV 80kA 12.87 (326.9 1.63 (41.3) 1.2 (30.5) 1A0835 15.5CAV7E 7 15.5kV 80kA 12.87 (326.9 1.63 (41.3) 1.2 (30.5) 1A0835 Type CAVH are fitted with a striker pin for indication 17.5kV; E-Rated PT Fuse; Non-indicating Catalog Amp Rated Dimensions Spare Parts Number Rating Voltage IR RMS Sym. Length Diameter Clip Centers (Clips) 17.5CAV2 2 17.5kV 40kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 17.5CAV4 4 17.5kV 40kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 17.5CAV6 6 17.5kV 40kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 17.5CAV10 10 17.5kV 40kA 8.66 (220) 1.63 (41.3) 7.46 (189.48) 1A0835 17.5ABGNA3.15 3.15 17.5kV 35kA 14.13 (358.9) 1 (25.4) 12.95 (328.9) A3354705 24kV; E-Rated PT Fuse; Non-indicating Catalog Amp Rated Dimensions Spare Parts Number Rating Voltage IR RMS Sym. Length Diameter Clip Centers (Clips) 24CAV2 2 24kV 40kA 13.39 (340.1) 1.63 (41.3) 12.19 (309.62) 1A0835 24CAV3 3 24kV 40kA 13.39 (340.1) 1.63 (41.3) 12.19 (309.62) 1A0835 24CAV4 4 24kV 40kA 13.39 (340.1) 1.63 (41.3) 12.19 (309.62) 1A0835 24ABGNA3.15 3.15 24kV 25kA 14.13 (358.9) 1 (25.4) 12.95 (328.9) A3354705 36kV; E-Rated PT Fuse; Non-indicating Catalog Amp Rated Dimensions Spare Parts Number Rating Voltage IR RMS Sym. Length Diameter Clip Centers (Clips) 36CAV2 2 36kV 40kA 17.32 (439.9) 1.63 (41.3) 16.12 (409.44) 1A0835 36CAV4 4 36kV 40kA 17.32 (439.9) 1.63 (41.3) 16.12 (409.44) 1A0835 36ABGNA3.15 3.15 36kV 31.5kA 14.13 (358.9) 1 (25.4) 12.95 (328.9) A3354705 38kV; E-Rated PT Fuse; Indicating & Non-indicating Catalog Amp Rated Dimensions Spare Parts Number Rating Voltage IR RMS Sym. Length Diameter Clip Centers (Clips) 38CAVH0.5E 0.5 38kV 40kA 17.32 (439.9) 1.63 (41.3) 16.12 (409.44) 1A0835 38CAVH1E 1 38kV 40kA 17.32 (439.9) 1.63 (41.3) 16.12 (409.44) 1A0835 38CAVH2E 2 38kV 40kA 17.32 (439.9) 1.63 (41.3) 16.12 (409.44) 1A0835 38CAV4E 4 38kV 40kA 17.32 (439.9) 1.63 (41.3) 16.12 (409.44) 1A0835 For additional information, visit www.edisonfuse.com 124 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section TIME IN SECONDS TIME IN SECONDS 3.6kV – 38kV Potential Transformer Fuses Time-Current Curves 5.5kV ABWNA 5.5kV AMWNA 100 100 80 80 60 60 50 50 40 40 0.5E 0.5E 30 30 20 20 1E 1E 10 10 2E 2E 8 8 5 5 4 4 3E 3E 3 3 2 2 5E 4E 1 1 5E .8 .8 .6 .6 .5 .5 .4 .4 .3 .3 .2 .2 .1 .1 .08 .08 .06 .06 .05 .05 .04 .04 .03 .03 .02 .02 .01 .01 RMS SYMMETRICAL CURRENT IN AMPS RMS SYMMETRICAL CURRENT IN AMPS For additional information, visit www.edisonfuse.com 125 0.5 1 2 3 4 5 6 8 10 20 30 40 50 60 80 100 200 0.5 2 3 4 5 6 8 10 20 30 40 50 60 80 100 200 3.6kV – 36kV High Voltage DIN Distribution Fuses performance to many other types of 63A rating. DIN Dimension Fuses To Specification DIN 43.625 Edison fuses exhibit considerable limitation of current and 2 I t under short-circuit conditions. The stress on circuit This product group covers current limiting fuses with components is thereby minimized and the reduction of dimensions to DIN 43.625 and performance in compliance energy release at the fault reduces fire risks. with IEC 282-1. Switching (arc) voltages are appreciably less than Advantages of Edison High Voltage Current - Limiting permitted values and fall with lower values of recovery Fuses The low power dissipation of Edison fuses ensures low voltage. The use of, for example, 12kV fuse on 6/7.2kV temperature rise of switchgear in which they are systems is therefore permissible. incorporated. Striker Characteristics The elements use the ‘M’ (metallurgical) effect, similar to The spring operated striker pin has a travel and energy that used in low voltage fuses. This ensures that, with output in compliance with the requirements of DIN 43625 melting on long time overloads, excessive temperatures are and IEC 282-1. not reached and damage to switchgear components, such as epoxy encapsulating enclosures, is thus prevented. Recommended Fuse Clips: Fuses that do not employ this feature are not only hotter Refer to page 130 in this catalog. running by comparison but also usually need to employ a higher current rating of fuse for the same service; thus an Edison 40A fuse is equivalent in terms of thermal Dimensions - Inches (mm) Striker In Operated Position 0.59" 15.0mm 1.77" 45.0mm Length 1.34" 1.02" 34.0mm 26.0mm For Diameter and Length Dimensions See Table Above For additional information, visit www.edisonfuse.com 126 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Diameter Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section 3.6kV – 36kV High Voltage DIN Distribution Fuses Ratings and Dimensions kV Catalog Numbers Amp Ratings Dimensions - in (mm) Diameter x Length IR RMS Sym 3.6ADOSJ(amp) 6.3, 10, 16, 20, 25, 31.5, 40 2.00 x 7.56 (51 x 192) 3.6WDOSJ(amp) 50, 63, 80, 100, 125 2.00 x 7.56 (51 x 192) 3.6WFOSJ(amp) 160, 200 3.00 x 7.56 (76 x 192 3.6 3.6ADLSJ(amp) 25, 40 2.00 x 11.50 (51 x 292) 50kA 3.6WDLSJ(amp) 50, 63, 80, 100, 125 2.00 x 11.50 (51 x 292) 3.6WFLSJ(amp) 160, 200 3.00 x 11.50 (76 X 292) 3.6WKLSJ(amp) 250, 315, 400 3.00 x 11.50 (76 X 292) 7.2TDLSJ(amp) 6.3, 10, 16, 20, 25, 31.5, 40, 50, 63 2.00 x 11.50 (51 x 292) 7.2 7.2TFLSJ(amp) 80, 100, 125, 160 3.00 x 11.50 (76 x 292) 40kA 7.2WKMSJ(amp) 200, 225, 250, 315, 355 3.00 x 17.41 (76 x 442) 12TDLEJ(amp) 6.3, 10, 16, 20, 25, 31.5, 40, 50, 63 2.00 x 11.50 (51 x 292) 12 12THLEJ(amp) 80, 100 2.52 x 11.50 (64 x 292) 63kA 12TKLEJ(amp) 125 3.00 x 11.50 (76 x 292) 12TXLEJ(amp)* 160, 200 3.50 x 11.50 (88 x 292) 17.5TDLSJ(amp)* 6.3, 10, 16, 20, 25, 31.5, 40 2.00 x 11.50 (51 x 292) 50kA 17.5TFLSJ(amp)* 50 3.00 x 11.50 (76 x 292) 35.5kA 17.5 17.5TDMEJ(amp) 6.3, 10, 16, 20, 25, 31.5, 40, 50, 63 2.00 x 17.41 (51 x 442) 17.5THMEJ(amp) 80, 100 2.52 x 17.41 (64 x 442) 50kA 17.5TKMEJ(amp) 125 3.00 x 17.41 (76 x 442) 24TDMEJ(amp) 6.3, 10, 16, 20, 25, 31.5, 40, 50 2.00 x 17.41 (51 x 442) 24 24THMEJ(amp) 63 2.52 x 17.41 (64 x 442) 50kA 1 24TFMEJ(amp) 80, 100* 3.00 x 17.41 (76 x 442) 2 24TXMEJ(amp)* 125 , 160 3.46 x 17.41 (88 x 442) 31.5kA 3 36TDQSJ(amp) 3.15 , 6.3, 10, 16, 20, 25 2.00 x 21.16 (51 x 537) 35.5kA 36 36TFQSJ(amp) 31.5, 40, 50 3.00 x 21.16 (51 x 537) 36TXQEJ(amp)* 63 3.46 x 21.16 (88 x 537) 20kA *Not compliant with VDE 0670, part 402. 1 2 3 -IR RMS Sym is 63kA -IR RMS Sym is 40kA -IR RMS Sym is 20kA Time-Current Characteristics–Average For 3.6kV Fuses: • 3.6ADOS 3.6WDLS For 7.2kV Fuses: • 7.2TDLSJ • 3.6WDOS 3.6WFLS • 7.2TFLSJ • 3.6ADLS 3.6WKLS • 7.2WKMSJ CURVES RELATE TO MEAN PRE-ARCING TIME FUSE TYPES: TDL / TFL WITH TOLERANCE ±10% ON CURRENT TIME-CURRENT CHARACTERISTIC 4 FOR 7.2kV FUSE-LINKS CURVES RELATE TOMEAN PRE_ARCING TIMES WITH A TOLERANCEOF ±10% ON CURRENT 10000 HOUR 3 160A 1000 125A 100A 80A 100 63A 50A 40A 10 31.5A 25A 1 20A 16A 10A 10A 6.3A 0.1 6.3A 3.15A* 0.01 10 100 100010000 R.M.S. SYMMETRICAL PROSPECTIVE CURENTINAMPS RMS SYMMETICAL PROSPECTIVE CURRENT IN AMPS * Curve valid for all 3.15A ratings shown in the selection table. † Curve valid for all 6.3A ratings shown in the selection table. For additional information, visit www.edisonfuse.com 127 PRE - ARCING TIME IN SECONDS VIRTUAL PRE-ARCING TIME IN SECONDS 3.6kV – 36kV High Voltage DIN Distribution Fuses Time-Current Characteristics–Average For 12kV Fuses: • 12TDLEJ • 12TXLEJ • 12THLEJ • 12TKLEJ FUSE TYPES: THM/TKM / TFM TIME- CURRENT CHARACTERISTIC FUSE TYPES: TDL/THL/TKL FOR 12kV FUSE-LINKS TIME- CURRENT CHARACTERISTIC CURVES RELATETO MEANPRE_ARCING TIMES WITH A TOLERANCEOF ±10% ON CURRENT FOR 12kV FUSE-LINKS 10000 CURVES RELATE TO MEAN PRE_ARCINGTIMES WITH A TOLERANCEOF ±10% ON CURRENT 10000 160A (TFM) 125A 125A (TKM) 1000 100A 100A (THM) 1000 80A 63A 100 50A 100 40A 31.5A 10 25A 10 20A 16A 1 10A 1 6.3A 0.1 0.1 0.01 10100 100010000 R.M.S. SYMMETRICAL PROSPECTIVE CURENT IN AMPS 0.01 10 100 1000 10000 R.M.S. SYMMETRICAL PROSPECTIVE CURENT IN AMPS FUSE TYPES: TXL TIME- CURRENT CHARACTERISTIC FOR 12kV FUSE-LINKS CURVES RELATE TO MEAN PRE_ARCING TIMES WITHATOLERANCE OF±10% ON CURRENT 10000 1000 160A 100 200A 10 1 0.1 0.01 10 100 1000 10000 R.M.S. SYMMETRICAL PROSPECTIVE CURENT IN AMPS For additional information, visit www.edisonfuse.com 128 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting VIRTUAL PRE-ARCING TIME IN SECONDS VIRTUAL PRE-ARCING TIME IN SECONDS Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section 3.6kV – 36kV High Voltage DIN Distribution Fuses Time-Current Characteristics–Average For 17.5kV Fuses: • 17.5TDLSJ • 17.5THMEJ • 17.5TFLSJ • 17.5TKMEJ • 17.5TDMEJ FUSE TYPES: TDL FUSE TYPES: TDM/THM/TKM TIME- CURRENT CHARACTERISTIC TIME- CURRENT CHARACTERISTIC FOR 17.5kV FUSE-LINKS FOR 17.5kV FUSE-LINKS CURVESRELATE TO MEANPRE_ARCING TIMES WITH ATOLERANCE OF ±10% ON CURRENT CURVES RELATE TO MEAN PRE_ARCING TIMES WITH A TOLERANCE OF ±10% ON CURRENT 10000 10000 125A 100A 1000 1000 80A 6.3A 63A 10A 50A 100 100 40A 16A 31.5A 20A 25A 10 25A 10 20A 31.5A 16A 10A 1 40A 1 6.3A 0.1 0.1 0.01 10 100 1000 10000 0.01 R.M.S. SYMMETRICAL PROSPECTIVE CURENT INAMPS 10 100 1000 10000 R.M.S. SYMMETRICAL PROSPECTIVE CURENT IN AMPS FUSE TYPES: TFL TIME- CURRENT CHARACTERISTIC FOR 17.5kV FUSE-LINKS CURVES RELATE TO MEAN PRE_ARCING TIMES WITH A TOLERANCE OF ±10%ON CURRENT 10000 1000 100 10 1 50A 0.1 0.01 10 100 100010000 R.M.S. SYMMETRICAL PROSPECTIVE CURENT IN AMPS For additional information, visit www.edisonfuse.com 129 VIRTUAL PRE-ARCING TIME IN SECONDS VIRTUAL PRE-ARCING TIME IN SECONDS VIRTUAL PRE-ARCING TIME IN SECONDS 3.6kV – 36kV High Voltage DIN Distribution Fuses Average Time-Current Curves DIN Fuseclips Suitable for use with all DIN HV fuses having 45mm For 24-27.6kV Fuses: • 24TDMEJ • 24TXMEJ end fittings. • 24THMEJ • 24TFMEJ A 0.99" 25.0mm FUSE TYPES: TDM/THM/TFM TIME- CURRENT CHARACTERISTIC FOR 24kV FUSE-LINKS CURVES RELATE TO MEAN PRE_ARCING TIMESWITHATOLERANCE OF±10% ON CURRENT 10000 1000 80A 63A 50A 4.06" 100 40A 103mm 31.5A 25A 10 20A 16A 10A 1 6.3A 0.1 0.43" 10.8mm A Part No. 270303 0.01 For Standard Duty (up to 200A) 10 100 1000 10000 R.M.S. SYMMETRICAL PROSPECTIVE CURENT IN AMPS FUSE TYPES:TFM/ TXM 1.5" TIME- CURRENTCHARACTERISTIC 38.1mm FOR 24kV FUSE-LINKS 0.38" CURVES RELATE TO MEAN PRE_ARCINGTIMES WITH A TOLERANCEOF±10% ON CURRENT 9.5mm 10000 1000 4.50" 114.3mm 100A 100 125A 160A 10 3.50" 88.9mm 1.77" 45.0mm 1 2.5" 63.5mm 0.1 1.19" 30.2mm 0.01 Part No. A3354745 10 100 1000 10000 Heavy Duty R.M.S. SYMMETRICAL PROSPECTIVECURENT IN AMPS For additional information, visit www.edisonfuse.com 130 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting VIRTUAL PRE-ARCING TIME IN SECONDS VIRTUAL PRE-ARCING TIME IN SECONDS Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section High Voltage DIN Distribution Fuses General Guide to the Selection of Fuses. For use in the Primary Circuit of Three-Phase Transformers Transformer 3-ph kVA Fuse Reference and Rating in Amps Fuse kV 3.6kV 7.2kV 12kV 17.5kV 24kV System kV 2.4kV 4.16kV 6.9kV 10kV 12.47kV 13.2kV 13.8kV 15.5kV 20kV 24kV 25 ADLSJ 16 TDLSJ 10 TDLSJ 6.3 TDLEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 30 ADLSJ 16 TDLSJ 10 TDLSJ 6.3 TDLEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 40 ADLSJ 20 TDLSJ 16 TDLSJ 10 TDLEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 45 ADLSJ 20 TDLSJ 16 TDLSJ 10 TDLEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 63 ADLSJ 31.5 TDLSJ 20 TDLSJ 16 TDLEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 TDMEJ 6.3 75 ADLSJ 40 TDLSJ 25 TDLSJ 16 TDLEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 6.3 TDMEJ 6.3 100 ADLSJ 40 TDLSJ 25 TDLSJ 20 TDLEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 6.3 112 ADLSJ 40 TDLSJ 31.5 TDLSJ 20 TDLEJ 16 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 6.3 125 WDLSJ 50 TDLSJ 31.5 TDLSJ 25 TDLEJ 16 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 TDMEJ 10 150 WDLSJ 50 TDLSJ 40 TDLSJ 25 TDLEJ 16 TDMEJ 16 TDMEJ 16 TDMEJ 16 TDMEJ 10 TDMEJ 10 TDMEJ 10 200 WDLSJ 63 TDLSJ 50 TDLSJ 31.5 TDLEJ 20 TDMEJ 16 TDMEJ 16 TDMEJ 16 TDMEJ 16 TDMEJ 10 TDMEJ 10 225 WDLSJ 80 TDLSJ 50 TDLSJ 40 TDLEJ 20 TDMEJ 16 TDMEJ 16 TDMEJ 16 TDMEJ 16 TDMEJ 10 TDMEJ 10 300 WDLSJ 100 TDLSJ 63 TDLSJ 40 TDLEJ 25 TDMEJ 20 TDMEJ 20 TDMEJ 20 TDMEJ 20 TDMEJ 16 TDMEJ 10 400 WDLSJ 125 TDLSJ 80 TDLSJ 50 TDLEJ 31.5 TDMEJ 31.5 TDMEJ 25 TDMEJ 25 TDMEJ 20 TDMEJ 20 TDMEJ 20 450 WFLSJ 160 TFLSJ 80 TDLSJ 63 TDLEJ 40 TDMEJ 31.5 TDMEJ 31.5 TDMEJ 31.5 TDMEJ 25 TDMEJ 20 TDMEJ 20 500 WFLSJ 160 TFLSJ 100 TDLSJ 63 TDLEJ 40 TDMEJ 31.5 TDMEJ 31.5 TDMEJ 31.5 TDMEJ 31.5 TDMEJ 25 TDMEJ 20 600 WFLSJ 200 TFLSJ 125 TFLSJ 80 TDLEJ 50 TDMEJ 40 TDMEJ 40 TDMEJ 40 TDMEJ 31.5 TDMEJ 25 TDMEJ 20 750 WKLSJ 250 TFLSJ 160 TFLSJ 80 TDLEJ 63 TDMEJ 50 TDMEJ 50 TDMEJ 40 TDMEJ 40 TDMEJ 31.5 TDMEJ 25 1000 WKLSJ 315 WKMSJ 200 TFLSJ 125 THLEJ 80 TDMEJ 63 TDMEJ 63 TDMEJ 63 TDMEJ 50 TDMEJ 40 TDMEJ 31.5 1250 WKLSJ 400 WKMSJ 250 TSFLSJ 160 THLEJ 100 TDMEJ 80 TDMEJ 80 TDMEJ 80 TDMEJ 63 TDMEJ 50 TDMEJ 40 1500 – WKMSJ 315 TFLSJ 160 TKLEJ 125 TDMEJ 100 TDMEJ 100 TDMEJ 80 TDMEJ 80 THMEJ 63 TDMEJ 50 2000 –– WKMSJ 250 – TKMEJ 125 TKMEJ 125 TKMEJ 125 TDMEJ 100–– 2500 –– WKMSJ 315– ––– TKMEJ 125–– Selection of these fuses has been based on a compromise between the following: 1. The fuse should withstand transformer magnetizing inrush currents, taken as 12 times full load current for 0.1 second. 2. The fuse should coordinate with the highest rating of the secondary fuse likely to be used. 3. The fuse should operate reasonably quickly in the event of a transformer inter-turn fault or a fault in the secondary terminal zone of the transformer. NOTES: A. In general, the recommendations apply equally to the use of fuse in open air or in an encapsulated enclosure, since “1” and “2” above dictate the use of a fuse current rating sufficiently above the transformer current rating to nullify any adverse thermal affect of encapsulation. However, if the transformer is subjected to long time overcurrents, a higher rate of fuse may be required. B. The above recommendations are not generally applicable to transformers feeding motor circuits with starting currents in excess of the rated current of the fuse. In this event, please consult your local Edison representative. C. Recommendations for other voltages are available on request. D. While the above recommendations give a good general guide, recommendations for specific cases will be sent on receipt of full details of the application. For additional information, visit www.edisonfuse.com 131 Fuse Blocks, Holders and Accessories Features and Benefits • High SCCR rated, UL Listed Class CC holder with indicator option for 600Vac/dc • UL Recognized midget and 10 x 38 holders • Terminals rated for use with 75ºC or 90ºC wire, fine stranded wire, spade terminals and comb-bus bars. Use any higher temperature rated wire with appropriate derating • Complete range of UL Listed and high SCCR rated 1- and 3-phase finger-safe comb-bus bars and power feed lugs Specifications Agency Information: UL File E300536 Guide IZLT Listed, IZLT2 Recognized CSA: File 47235; EHM - Class 6225-30, EHCC - Class 6225-01 CCC GB13539 Ratings: 600V/30A (UL) 690V/32A (IEC) Wire Range: 2 #18 to #4 (0.8 to 21.1mm ) Torque Ratings: 30 Lb-In (3.4 N•m) maximum Flammability Ratings: UL 94V0, self-extinguishing Storage & Operating Temperature Range: -20ºC to +90ºC (indicating) -20ºC to +120ºC (non-indicating) Catalog Number Series & With Without Voltage & Agency Number Terminal SCCR Edison Size Indicator Indicator Current Markings of Poles Rating Rating Fuses EHM UL 1 Solid, Stranded, EHM1DIU EHM1DU UR, IEC 10x38 600V/30A; Fine Stranded, 200kA MCL, MOL, 2 EHM2DIU EHM2DU 60269-2, and IEC Spade Lug, rms sym MEQ, MEN CSA EHM3DIU EHM3DU 3 Midget 690V/32A Comb-Bus Bar, EHCC1DIU EHCC1DU 1 Single and Dual Wire; EHCC UL 200kA EDCC, HCLR, EHCC2DIU EHCC2DU UL, CSA 2 75ºC and 90ºC Class CC 600V/30A rms sym HCTR EHCC3DIU EHCC3DU 3 Cu wire For additional information, visit www.edisonfuse.com 132 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories Features Multi-Pole Ganging Use multi-pole connection kit part number Hole for Wire Optional Open Fuse Security Tag EV-L to gang multiple poles together. One Indicator EV-L kit is sufficient to gang up to 4 poles. Self-Extinguishing, 4mm UL 94V0 Rated Lockout Polyester Feature Material in Fuse Carrier Captive, Fully Backed Out Phil-Slot Screw Spade lug connection 6mm Wire Removing Instructions Clamp Lug and open bus bar connection 1. Press down on top (#4 to #18) of DIN-Rail Toolless Toolless DIN Rail Wire Strip Ganging of Mounting Length Multiple Indicator Poles 2. Rotate out on the bottom 70 Dimensional Data - mm (in) [ 2.756 ] 52.5 [ 2.067 ] 35 [ 1.378 ] 61.83 [ 2.434 ] 17.5 18.59 [ 0.689 ] [ 0.732 ] 42.58 [ 1.676 ] 52.83 [ 2.080 ] 83.19 [ 3.275 ] 7.0 [ 0.276 ] For additional information, visit www.edisonfuse.com 133 73.88 [ 2.909 ] 9 [ 0.354 ] Fuse Blocks, Holders and Accessories Features and Benefits • Easily distribute power in single-phase or three-phase configurations • Flexible cut-to-length solutions without compromising on the product’s finger-safe features • 100kA SCCR (Short Circuit Current Rating) when protected by a 200A Class J fuse • Single-phase bus bars rated to 1000Vdc and 100A in end-fed configuration (200A for center-fed configuration) • Three-phase bus bars rated to 600Vac/dc and 100A in end-fed configuration • Power feed terminals for single-phase and three-phase service Specifications Agency Information: UL508, File E195399 Pitch: 17.8mm SCCR: 10kA (default) 100kA (with upstream Class J 200A fuses) Max Current: 100A (power feed from end) Max Voltage: 600Vac/dc (three phase) 1000Vdc/600Vac (single phase) Selection Guide Part Voltage Amperage # of Wire Size Wire Torque Number Description Phase Rating (V) Rating (A) Poles (AWG) Type (LB-in) EB1P100M3 Single-phase, 3-pole busbar Single 1000 100 3 N/A N/A N/A EB1P100M6 Single-phase, 6-pole busbar Single 1000 100 6 N/A N/A N/A EB1P100M9 Single-phase, 9-pole busbar Single 1000 100 9 N/A N/A N/A EB1P100M12 Single-phase, 12-pole busbar Single 1000 100 12 N/A N/A N/A EB1P100M15 Single-phase, 15-pole busbar Single 1000 100 15 N/A N/A N/A EB1P100M57 Single-phase, 57-pole busbar Single 1000 100 57 N/A N/A N/A EB3P100M3 Three-phase, 3-pole busbar Three 600 100 3 N/A N/A N/A EB3P100M6 Three-phase, 6-pole busbar Three 600 100 6 N/A N/A N/A EB3P100M9 Three-phase, 3-pole busbar Three 600 100 9 N/A N/A N/A EB3P100M12 Three-phase, 12-pole busbar Three 600 100 12 N/A N/A N/A EB3P100M15 Three-phase, 15-pole busbar Three 600 100 15 N/A N/A N/A EB3P100M57 Three-phase, 57-pole busbar Three 600 100 57 N/A N/A N/A EECAP1P Single-phase, busbar end cap N/A N/A N/A N/A N/A N/A N/A EECAPMP Three-phase, busbar end cap N/A N/A N/A N/A N/A N/A N/A EFSCVR Open pin safety covers, 5-poles N/A N/A N/A 5 N/A N/A N/A EPWR35MM Three-phase, feeder terminal N/A 1000 115 N/A 1/0 - 10 CU 60ºC 50 EPWR50MM Direct feed, feeder terminal N/A 1000 115 N/A 1 - 14 CU 75ºC 35 EPWR1PLP Single-phase, feeder terminal N/A 1000 115 N/A 1/0 - 10 CU 60ºC 80 For additional information, visit www.edisonfuse.com 134 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories Typical Installation Example Power Feed Terminals Comb-Bus Bar Modular Fuse Holders Typical Dimensional Data Three-phase Single-phase 6 17,8 5x17,8 = 89 +2 113 EECAP1P EECAPMP EFSCVR EPWR1PLP EPWR35MM EPWR50MM For additional information, visit www.edisonfuse.com 135 13,5 Fuse Blocks, Holders and Accessories Modular Knifeblade Fuse Blocks Features and Benefits Class R, H(K), & J Applications up to 600 •  Integral dovetails allow snapping together multiple Amps poles at point-of-use for greater application flexibility Specifications • Factory assembled two- and three-pole configurations available Ratings: Volts: — 250V, 600V • Up to four mounting holes per pole increase installation Amps: — 70-600A flexibility SCCR: — 200kA (Class R & J) • Standard phase barriers between poles for additional 10kA (Class H & K) safety Agency Information: • Design meets UL creep and clearance requirements Blocks: UL - Listed cULus for Industrial Control Circuits (UL 508 and UL 845) E14853 – IZLT & IZLT7 • 200 to 600A blocks meet the higher UL creep and CSA - Certified 47235 – clearance requirements for Industrial Power 6225-01 Distribution Standards (UL 98, UL 69, UL 489, UL 891 Covers: UL - Listed UL and UL 869A) E58836 – JDVS2 • Optional IP20 finger-safe covers available on entire CSA - Certified 47235 – knifeblade fuse block product line: 6225-01 – High-clarity see-through covers allow for inspecting Flammability Ratings: wire terminations or thermography measurements without removing cover Blocks: UL 94V0, self-extinguishing Covers: UL 94HB, self-extinguishing – Probe holes included for easy, safer testing and troubleshooting Operating & Storage Temperature Range: – Built-in lockout/tagout feature improves safety Blocks -40ºC to 120ºC • Standard fuse clip reinforcing springs enhance Covers non-indicating covers -40ºC to 120ºC electrical contact indicating covers -20ºC to 90ºC Typical Applications • Critical power, factory automation, renewable energy, Materials: HVAC, building/elevator controls, building entrance, Base – Thermoplastic process industries Box Lug – Tin-plated aluminum Wire:* Cu/Al – 75ºC/90ºC (100 - 200A) Cu/Al – 75ºC only (400 - 600A)** Scan this tag to get the *Higher temperature rated wire can be used with appropriate derating. latest product information for the **400A Class J double box lug rated for 75ºC/90ºC Cu/Al. Modular Knifeblade Fuse Blocks. For additional information, visit www.edisonfuse.com 136 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories Modular Knifeblade Fuse Blocks Part Number Table 250V Class H(K) and R 600V Class H(K) and R Catalog Number Covers* Fuse Range Number Wire Range Wire Range Torque Edison Class H(K) Class R w/o Indication w/ Indication Volts (amps) of Poles (solid and stranded)*** (fine stranded Cu) N•m (Lb-In) Fuses – 1-3 AWG 6.2 (55) HM25100-1CR RM25100-1CR 1 1/0-3 AWG; (2) Cu 4-6 AWG 4-6 AWG 5.6 (50) Class H(K): 70- HM25100-2CR RM25100-2CR CVR-RH-25100 CVRI-RH-25100 2 4-6 AWG; (2) Cu 8 AWG 8 AWG 5.1 (45) KON 100 8 AWG; (2) Cu 10-14 AWG – 4.5 (40) CDNC/PONC HM25100-3CR RM25100-3CR 3 Cu 10-14 AWG; Al 10-12 AWG – 4.0 (35) HM25200-1CR RM25200-1CR 1 110- 250 MCM-1 AWG 3/0-1 AWG 42 (375) HM25200-2CR RM25200-2CR CVR-RH-25200 CVRI-RH-25200 2 200 2-6 AWG; (2) Cu 2-6 AWG 2-6 AWG 31 (275) HM25200-3CR RM25200-3CR 250 3 Class R: 600kcmil 57 (500) ECNR HM25400-1CR RM25400-1CR 1 225- 500kcmil-4 AWG 51 (450) LENRK 2 N/A HM25400-2CR RM25400-2CR CVR-RH-25400 CVRI-RH-25400 400 (2) Cu 3/0 - 4 AWG 57 (500) NCLR HM25400-3CR RM25400-3CR 3 (2) Al 3/0 - 4 AWG 34 (300) HM25600-1CR RM25600-1CR 1 450- HM25600-2CR RM25600-2CR CVR-RH-25600 CVRI-RH-25600 2 (2) 500kcmil-4 AWG N/A 51 (450) 600 HM25600-3CR RM25600-3CR 3 – 1 1-3 AWG 6.2 (55) HM60100-1CR RM60100-1CR 1/0-3 AWG; (2) Cu 4-6 AWG 4-6 AWG 5.6 (50) Class H(K): 70- 2 HM60100-2CR RM60100-2CR CVR-RH-60100 CVRI-RH-60100 4-6 AWG; (2) Cu 8 AWG 8 AWG 5.1 (45) KOS 100 8 AWG; (2) Cu 10-14 AWG – 4.5 (40) CDSC HM60100-3CR RM60100-3CR 3 Cu 10-14 AWG; Al 10-12 AWG – 4.0 (35) HM60200-1CR RM60200-1CR 1 110- 250 MCM-1 AWG 3/0-1 AWG 42 (375) HM60200-2CR RM60200-2CR CVR-RH-60200 CVRI-RH-60200 2 200 2-6 AWG; (2) Cu 2-6 AWG 2-6 AWG 31 (275) HM60200-3CR RM60200-3CR 600 3 Class R: 1 600kcmil 57 (500) ECSR HM60400-1CR RM60400-1CR 225- 500kcmil-4 AWG 51 (450) LESRK N/A HM60400-2CR RM60400-2CR CVR-RH-60400 CVRI-RH-60400 2 400 (2) Cu 3/0 - 4 AWG 57 (500) SCLR HM60400-3CR RM60400-3CR 3 (2) Al 3/0 - 4 AWG 34 (300) PVS-R HM60600-1CR RM60600-1CR 1 450- HM60600-2CR RM60600-2CR CVR-RH-60600 CVRI-RH-60600 2 (2) 500kcmil-4 AWG N/A 51 (450) 600 HM60600-3CR RM60600-3CR 3 *Covers sold serarately. Blown fuse indication requires 90 volts minimum and closed circuit to operate. **With easy ID™ blown fuse indication. ***Ratings for copper and aluminum wire except where otherwise noted. For additional information, visit www.edisonfuse.com 137 Fuse Blocks, Holders and Accessories Modular Knifeblade Fuse Blocks Part Number Table (continued) Class J Catalog Number Covers* Fuse Range Number Wire Range Wire Range Torque Edison Class J w/o Indication w/ Indication Volts (amps) of Poles (solid and stranded)*** (fine stranded) N•m (Lb-In) Fuses 1-3 AWG 6.2 (55) – JM60100-1CR 1 1/0-3 AWG; (2) Cu 4-6 AWG 4-6 AWG 5.6 (50) 70- 2 4-6 AWG; (2) Cu 8 AWG 8 AWG 5.1 (45) JM60100-2CR CVR-J-60100-M CVRI-J-60100-M 100 8 AWG; (2) Cu 10-14 AWG – 4.5 (40) JM60100-3CR 3 Cu 10-14 AWG; Al 10-12 AWG – 4.0 (35) JM60200-1CR 1 110- 250 MCM-1 AWG 3/0-1 AWG 42 (375) JM60200-2CR CVR-J-60200-M CVRI-J-60200-M 2 200 2-6 AWG; (2) Cu 2-6 AWG 2-6 AWG 31 (275) JM60200-3CR 3 JHL 600 600kcmil 57 (500) JDL JM60400-1CR 1 500kcmil-4 AWG 51 (450) JFJ JM60400-2CR 2 (2) Cu 3/0 - 4 AWG 57 (500) JM60400-3CR 3 CVR-J-60400-M CVRI-J-60400-M 225-400 (2) Al 3/0 - 4 AWG N/A 34 (300) † JM60400-1MW22 1 (2) 350kcmil-1 AWG 42 (375) † JM60400-2MW22 2 (2) 2 AWG - 6 AWG 51 (275) † JM60400-3MW22 3 JM60600-1CR 1 450- JM60600-2CR CVR-J-60600 CVRI-J-60600 2 (2) 500kcmil-4 AWG N/A 51 (450) 600 JM60600-3CR 3 *Covers sold serarately. Blown fuse indication requires 90 volts minimum and closed circuit to operate. **With easyID™ blown fuse indication. ***Ratings for copper and aluminum wire except where otherwise noted. o o † 400A Class J double box lug rated for 75 C/90 C Cu/Al. Double Box Lug Configurations • Allows for ease of installation with smaller, more flexible wire • Capable of achieving maximum current rating with parallel copper or aluminum wires • Standard on all 600A blocks • Optional on 400A Class J blocks †† • Compatible with IP20 finger-safe covers †† For Class J 400A double box lug configuration, optional cover provides IP20 finger-safe protection for dual 350kcmil-300kcmil wires or one single 350kcmil-6 AWG wire. Optional 400A All 600A Versions Class J Version (JM60400-_MW22) For additional information, visit www.edisonfuse.com 138 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories 250V Class R & H(K) Dimensional Specifications Dimensions - mm (in) 70-100A 110-200A 225-400A 450-600A For additional information, visit www.edisonfuse.com 139 Fuse Blocks, Holders and Accessories 600V Class R & H(K) Dimensional Specifications Dimensions - mm (in) 70-100A 110-200A 225-400A 450-600A For additional information, visit www.edisonfuse.com 140 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories Class J Dimensional Specifications Dimensions - mm (in) 70-100A 110-200A 225-400A Optional Lug Standard Lug 450-600A For additional information, visit www.edisonfuse.com 141 Fuse Blocks, Holders and Accessories Power Distribution Fuse Block B Product description: Features and bene! ts: New Class J fuse block features power • Combination power distribution block and distribution capability. fuse block reduces wire connections and total panel components, using 50% less panel This patented design simplifies your panel space and reducing installation time and layout and uses up to 50% less panel labor by 33%. space. Additionally, it lowers inventory costs while reducing installation time and • A 200kA withstand rating helps achieve a labor by 33%. higher assembly short-circuit current rating ® (SCCR) for compliance with NEC sections Furthermore, this design uses fewer wire 110.10, 409.110(4), 409.22, 440.4(B), 670.3(A)(4) connections, reducing watts loss and and 670.5. overall operating temperature when compared with traditional fuse block/power • Optional see-through cover enhances safety distribution block solutions. with IP20 finger-safe protection, lockout/ tagout capability and open circuit indication. Ca talog symbol: JM60___-_MW_ Wire: • 75°C CU/A L* Fuse Class: * Conductors with higher temperatur e rating may be used, but at • Class J their 75°C ampacity . Ratings: Accessories: Volts - 600V • Optional IP 20 finger-sa fe co vers in ind icating a n d non- Amps - 70-400A indicating versions. Ord er one for each pole . Withstand - 200kA Sym RMS Recommended fuses (order separ ately): Agency information: • Time-delay Class J Low- Peak™ (see Data Sh eet # 1007 ) • Blocks: - UL Recogn iz ed E14853 – IZLT2 - Indicating LP J-_(amp)S PI - C SA Ce rtif ied 47235 — 6225-01 - Non-indicatin g LPJ-_(amp)S P • Covers: - UL Liste d UL E58836 – JDVS2 • Fast-acting Class J Limit ron™ (se e Data Sh eet # 1027 ) - Non-indicatin g JKS-(amp) Poles: • High Spee d Class J DFJ Drive F u ses ( see D ata Sh eet # • 1-, 2-, 3-pole 1048) F lammability ratings: • Blocks: - UL 94V0, self-extinguishing Bussmann power distribution fuse blocks ar e available • Covers: - UL 94HB, self-extinguishing preassembled into 1-, 2- an d 3-p ole ve rsio ns. Indi vidual Op erating and storage temperature range: blocks can be dovetailed together to achieve the desir ed • B loc ks: -40°C to +120°C number of poles. Use of covers r equir es ordering separately • Covers: - N on-ind ica ting -40°C to +120°C one cover for each pole. - Ind ica ting -20°C to +90°C Materials: • Base: - Thermoplastic • Terminals : - Tin-plated aluminum For additional information, visit www.edisonfuse.com 142 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories Lineside Loadside Part Optional Volts Fuse Conductors Torque Conductors Torque Number Covers (V) Range Poles AWG; N•m (Lb-In) AWG; N•m (Lb-In) 4-6; 4.0 (35) 1/0-1; 5.6 (50) JM60100-1MW14 1 CVR-J-60100-M 70- 4-6; 5.0 (45) (4) 4-14 CU, 4-8 AL 8; 2.8 (25) JM60100-2MW14 600 2 (1) 1/0-14 CU/AL † 8; 4.5 (40) CVRI-J-60100-M* 100A (8)**10-14 CU 10-14; 2.3 (20) JM60100-3MW14 3 10-14; 4.0 (35) † (2) 10-14; 3.4 (30) 4-6; 4.0 (35) JM60200-1MW16 1 CVR-J-60200-M 110- (6) 4-14 CU, 4-8 AL 8; 2.8 (25) 250kcmil-1; 42 (375) JM60200-2MW16 600 2 (1) 250kcmil-6 CU/AL † (2) 2-6; 31 (275) CVRI-J-60200-M* 200A (12)**10-14 CU 10-14; 2.3 (20) JM60200-3MW16 3 † (2) 10-14; 3.4 (30) 2-3; 5.6 (50) 1 4-6; 5.0 (45) 600kcmil-4; 57 (500) JM60400-1MW16 2 (6) 2-14 CU, 2-8 AL 8; 4.5 (40) 500kcmil; 51 (450) JM60400-2MW16 (1) 600kcmil-4 CU/AL ††† (2) 3/0-4; 57 (500) CU 3 (12)**8-14 CU, 8 AL (2) 8; 4.5 (40) JM60400-3MW16 34 (300) AL † 10-14; 4.0 (35) † (2) 10-14; 4.5 (40) CVR-J-60400-M 225- 600 CVRI-J-60400-M* 400A 2-3; 5.6 (50) 4-6; 5.0 (45) †† JM60400-1MW26 1 (6) 2-14 CU, 2-8 AL 8; 4.5 (40) (2) 350kcmil-1; 42 (375) †† JM60400-2MW26 2 (2) 350kcmil-6 CU/AL ††† (2) 2-6; 31 (275) (12)**8-14 CU, 8 AL (2) 8; 4.5 (40) †† JM60400-3MW26 3 † 10-14; 4.0 (35) † (2) 10-14; 4.5 (40) * With open fuse indication. 90V minimum and closed circuit required for illumination. ** Dual wire rated lugs with same wire size. † Copper conductor only. †† Lineside dual box lug. ††† Dual wire not for CSA installations C B A 100A Block Mounting Holes ØN ØO ØN ØO M M D L L J K J F I E H G Block Size A B C D E F G H I J K L M ØN ØO in 2.0 4.0 6.0 5.5 5.5 2.8 2.2 6.0 2.8 0.9 2.0 0.4 1.1 0.4 0.5 100A mm 51 102 153 139 139 72 55 152 72 22 51 10 29 9 13 in 2.6 5.3 8.0 6.8 6.8 3.8 3.0 7.3 3.8 1.4 2.6 0.3 1.3 0.4 0.7 200A mm 67 134 203 172 172 97 75 186 97 35 67 8 32 9 19 in 3.5 7.0 10.6 8.0 8.0 4.8 4.1 8.7 4.8 2.0 3.5 0.3 1.6 0.4 0.7 400A mm 88 177 268 202 202 121 105 220 121 50 88 8 41 9 19 For additional information, visit www.edisonfuse.com 143 Fuse Blocks, Holders and Accessories Catalog Number H250 & H600 Series Catalog Number R250 & R600 Series Class H(K) and R Fuse Blocks: H250 & H600 Series: For use with Class H and K5 Fuses (Edison KON and ERN, H250; Edison KOS and ERS, H600) R250 & R600 Series: For use with Class R Fuses (Edison LENRK and ECNR, R250; Edison LESRK and ECSR, R600) Construction: Thermoplastic, UL Flammability 94V0 Amp Ratings: 1/10-100A Voltage Ratings: H250, 250Vac; H600, 600Vac/dc; R250, 250Vac; R600, 600Vac Agency Approvals: UL Listed, Guide IZLT, File E14853 CSA, Class 6225-01, File 47235 Class H Fuseblocks (250V) Catalog Data (For Use With KON, ERN, PONC, and CDNC Fuses) Terminal Type (Suffix No.) Screw Box Lug w/ Pressure Plate Clip with Clip with 0.25 = Catalog & Clip with Figure Wire Reinforced Pressure Reinforced Copper Quick Poles Number—— Reinforced Spring Number Range Amps Spring Plate Spring Only Connect 1 ⁄10 1 H25030-1 S SR P PR C CR —Q 1 C, CR #2-14 CU, #2-12 AL to 2 H25030-2 S SR P PR C CR —— 2 P, PR #10-18 CU ONLY 30 3 H25030-3 S SR P PR C CR —— 3 Q N/A S, SR #10-18 CU ONLY 31 1 H25060-1 —— — — C CR CO —4 C, CR #2-14 CU, #2-8 AL to 2 H25060-2 — — — — C CR CO —5 CO #2-14 CU ONLY 60 3 H25060-3 — — — — C CR CO —6 61 1 H25100-1 — SR — — — CR —— 7 CR #1/0-8 CU/AL to 2 H25100-2 — SR — — — CR —— 8 SR #8W/ Ring Terminal 100 3 H25100-3 — SR — — — CR —— 9 For additional information, visit www.edisonfuse.com 144 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories Class R Fuseblocks (250V) Catalog Data (For Use With ECNR, LENRK, and NCLR Fuses) Terminal Type (Suffix No.) Screw w/ Box Lug w/ 0.25” Catalog Pres. Clip Quick- Fig. Wire Amps Number — Plate — Cu Only Connect No. Range 1 ⁄10 1 R25030-1 SR PR CR COR QR* 1 COR #6-14 CU ONLY to 2 R25030-2 SR PR CR COR —2 CR #2-14 CU, #2-12 AL 30 3 R25030-3 SR PR CR COR —3 PR #10-18 CU ONLY QR N/A SR #10-18 CU ONLY 31 1 R25060-1 —— CR —— 4 to 2 R25060-2 —— CR —— 5 CR #2-14 CU, #2-8 AL 60 3 R25060-3 —— CR —— 6 61 1 R25100-1 —— CR —— 7 to 2 R25100-2 —— CR —— 8 CR 1/0-8 CU/AL 100 3 R25100-3 —— CR —— 9 *UL Recognized, No CSA Certification. Dimensions – in 1 250V ⁄10 to 30A 3" 2.05" 2.5" 1.41" 1.09" 1.25" 2 SPACES AT 0.22" 0.17" 0.75" 0.41" 0.95" 0.25" 0.95" - 1.91" 1.27" 3.03" 0.5" 1.52" 0.22" DIAMETER 0.55" 0.55" FIGURE 1. FIGURE 2. FIGURE 3. 250V, 31A to 60A 2.81 4.125 1.5 1.31 0.5 1.31 1.31 1.73 0.5 0.27 0.5 0.5 0.5 0.22 x 0.41 0.22 x 0.41 0.22 x 0.41 4.25 1.G 25 1.5 FIGURE 4. FIGURE 5. FIGURE 6. 250V, 61A to 100A 4.94" 3.38" 0.59" 1.81" 0.59" 1.56" 1.56" 2.06" 1.56" 0.25" 0.62" 0.62" 0.62" 0.28" DIA. x 0.5" C'BORE 7.36" 3.125" 2.38" 2.125" FIGURE 7. FIGURE 8. FIGURE 9. For additional information, visit www.edisonfuse.com 145 Poles Fuse Blocks, Holders and Accessories Class H Fuseblocks (600V) Catalog Data (For Use With KOS, ERS, and CDSC Fuses) Terminal Type (Suffix No.) Screw Box Lug w/ Pressure Plate Clip with Clip with Figure Wire & Clip with Catalog Reinforced Pressure Reinforced Number Range Amps Reinforced Spring — Poles Number — Spring Plate Spring 1 ⁄10 1 H60030-1 S SR P PR C CR 1 C, CR #2-14 CU, #2-12 AL to 2 H60030-2 S SR P PR C CR 2 P, PR, S, SR #10-18 CU ONLY 30 3 H60030-3 S SR P PR C CR 3 31 1 H60060-1 —— — — C CR 4 to 2 H60060-2 — — — — C CR 5 C, CR #2-14 CU, #2-8 AL 60 3 H60060-3 — — — — C CR 6 61 1 H60100-1 — — — — — CR 7 to 2 H60100-2 — — — — — CR 8 CR #1/0-8 CU/AL 100 3 H60100-3 — — — — — CR 9 Class R Fuseblocks (600V) Catalog Data (For Use With LESRK, ECSR, and SCLR Fuses) Terminal Type (Suffix No.) Screw w/ Box Lug w/ Catalog Pres. Clip Fig. Wire Amps Number — Plate — Cu Only No. Range 1 ⁄10 1 R60030-1 SR PR CR —1 COR #6-14 CU ONLY to 2 R60030-2 SR PR CR COR 2 CR #2-14 CU, #2-12 AL 30 3 R60030-3 SR PR CR COR 3 PR, SR #10-18 CU ONLY 31 1 R60060-1 —— CR —4 to 2 R60060-2 —— CR —5 CR #2-14 CU, #2-8 AL 60 3 R60060-3 —— CR —6 61 1 R60100-1 —— CR —7 to 2 R60100-2 —— CR —8 CR, 1/0-8 CU/AL 100 3 R60100-3 —— CR — 9 For additional information, visit www.edisonfuse.com 146 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Poles Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section F Fu us se e B Bllo oc ck ks s,, H Ho olld de er rs s a an nd d A Ac cc ce es ss so or riie es s Dimensions – in 1 600V, ⁄10 to 30A 4.25 2.90 1.54 0.25 1.56 1.56 1.56 1.73 0.25 0.26 0.62 0.62 0.62 0.28 x 0.5 0.28 x 0.5 0.28 x 0.5 6.25 3.13 1.56 FIGURE 1. FIGURE 2. FIGURE 3. 600V, 31 to 60A 4.94" 3.38" 0.59" 1.81" 0.59" 1.56" 1.56" 1.56" 2.06" 0.25" 0.62" 0.62" 0.62" 0.28" DIA. x 0.5" C'BORE 7.36" 3.125" 2.38" 2.125" FIGURE 4. FIGURE 5. FIGURE 6. 600V, 61 to 100A 2.22 5.84 4.03 2.38 0.88 1.81 1.81 0.67 0.67 1.81 0.34 0.88 0.88 0.28 x 0.5 0.28 x 0.5 0.28 x 0.5 9.5 4.25 2.63 FIGURE 7. FIGURE 8. FIGURE 9. For additional information, visit www.edisonfuse.com 147 Fuse Blocks, Holders and Accessories Standard J Fuse Blocks (600V) Catalog Data Catalog Numbers Pressure Box Box Lug w/ Fig. Max. Wire Amps Screw Plate Lug Retaining Clip No. Size 1 J60030-1S* J60030-1P J60030-1C J60030-1CR 1 C, CR#2-14 CU, #2-8 AL 1/2–30 2 J60030-2S* J60030-2P J60030-2C J60030-2CR 2 P, PR, S, SR 3 J60030-3S* J60030-3P J60030-3C J60030-3CR 3 #10-14 CU Only 1—— J60060-1C J60060-1CR 1 C, CR, #2-14 CU/AL 31–60 2— — J60060-2C J60060-2CR 2 CU only 3— — J60060-3C J60060-3CR 3 61–100 3— — — J60100-3CR 4 CR 1/0-8 CU/AL * No UL, No CSA Certification. Catalog Number J600 Series Class J Fuse Blocks: J600 Series: For use with Class J Fuses (Edison JDL, JFL and CJ) Construction: Thermoplastic, UL Flammability 94V0 Amp Ratings: 1/2-100A Voltage Ratings: 600Vac/dc Agency Approvals: UL Listed, Guide IZLT, File E14853 CSA, Class 6225-01, File 47235 Dimensions - inches 1/2 to 60A 61 to 100A 1.702" 3.202" 4.702" 2.415" 2.250" 0.750" 0.750" 2.250" 5" 2.28" 0.94" 1.583" 0.30" 0.22" Dia. 6.28" 4.005" C 0.5" L C C'Bore L 3.14" 1.500" 1.75" 1.5" Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. 148 For additional information, visit www.edisonfuse.com Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Poles Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories Class T Fuse Blocks: T300 Series: For use with Class T Fuses (Edison TJN) T600 Series: For use with Class T Fuses (Edison TJS) Construction: Glass Polyester, Phenolic on 600A, UL Flammability: 94V0 1 Ratings: T300: 300Vac/dc, ⁄2 - 600A 1 T600: 600Vac/dc, ⁄2 - 600A Agency Approvals: UL Listed, Guide IZLT, File E14853 CSA, Class 6225-01, File 47235 Class T Fuse Blocks (300V & 600V) Catalog Data Dimensions - inches Catalog Numbers Figure 1. 300V 1/2A to 60A Box Fig. Max. Wire Amps Poles Screw Lug No. Size 1.63" 1.63" TJN, 300V 0.72" 0.72" 2 T30030-2SR T30030-2CR 1 SR #10Cu; 0.16" 0.16" 1 ⁄2–30 3 T30030-3SR T30030-3CR 1 CR #6Cu-Al 2 T30060-2SR* T30060-2CR 1 SR #10Cu 31–60 3 T30060-3SR* T30060-3CR 1 CR #2Cu Al 4 T30060-4SR* T30060-4CR 1 0.91" 0.91" 1— T30100-1C 4 61–1002— T30100-2C 4 1/0 Cu-Al 3— T30100-3C 4 1— T30200-1C 5 101-200 250MCM Cu-Al T30030-S T30060-C 3— T30200-3C 5 SECTION X-X SECTION Z-Z 201-4001— T30400-1C 6 600MCM Cu-Al A 401-6001— T30600-1C 7 (2) 600MCM Cu-Al 1.20" B TJS, 600V 0.69" X Z 1 T60030-1SR T60030-1CR 2 SR #10Cu; 1 ⁄2–30 2 T60030-2SR T60030-2CR 2 CR #2Cu-Al 3 T60030-3SR T60030-3CR 2 1 T60060-1SR* T60060-1CR 3 2.75" 2.5" 31–60 2 T60060-2SR T60060-2CR 3 CR#2Cu Al 3 T60060-3SR* T60060-3CR 3 SR #10Cu 1— T60100-1C 4 61–1002— T60100-2C 4 2/0 Cu-Al 3— T60100-3C 4 X Z Full 0.44" 101-2001— T60200-1C 5 250MCM Cu-Al Radius 0.20" 201-4001— T60400-1C 6 600MCM Cu-Al C 401-6001— T60600-1C 7 (2) 600MCM Cu-Al Dimensions (inches) * U.L. Recognized Terminal Type AB C T30030-2 2.41 — 1.03 T30060-2 T30030-3 3.44 1.03 2.06 T30060-3 T30030-4 4.47 2.06 3.09 T30060-4 Figure 2. 600V 1/2A to 30A 1.44" 1.44" 2.59" 3.75" 0.55" 0.33" 0.55" 1.16" 0.33" 0.55" 2.31" 0.33" 0.5" 0.22" DIAMETER 0.5" C'BORE 0.33" 3.19" 1.563" 1.42" For additional information, visit www.edisonfuse.com 149 Fuse Blocks, Holders and Accessories Dimensions - inches Figure 3. 600V 31 to 60A 1.75" 1.81" 3.34" 4.86" 0.63" 1.53" 0.63" 3.06" 0.63" 0.5" 0.59" 0.59" 0.59" 0.22" DIAMETER 0.5" C'BORE 2.94" 1.63" 1.47" Figure 4. 300V, 61 to 100A 600V, 61 to 100A 1.69" (1 POLE) 1.69" (1 POLE) 3.09" (2 POLE) 3.09" (2 POLE) 4.5" (3 POLE) 4.5" (3 POLE) 2.06" 1.41" (2 POLE) 0.84" 1.41" (2 POLE) 0.84" 2.81" (3 POLE) 2.81" (3 POLE) X Z 0.78" X Z 0.22" DIA. 0.22" DIA. 0.52" C'BORE 0.52" C'BORE 0.55" DEEP 0.55" DEEP 2.25" 2.34" 4.78" REF. REF. 2.39" 2.39" X Z X Z 0.38" SECTION Z-Z 0.38" 0.75" 0.75" Figure 6. 300V, 600V 201 to 400A Figure 5. 300V, 600V 101 to 200A 6" 6" 0.05" 3" 3" 1.125" 2.25" 1.25" 2.25" 1.25" 1.125" 0.63" 0.28" DIAMETER 0.28" DIAMETER 1.69" 0.63" C'BORE 0.5" DEEP 0.63" C'BORE 0.5" DEEP 1.84" - 300V 2.72" - 600V 3.06" 3.06" 2.56" 1.94" 2.38" 0.81" 0.81" Figure 7. 300V, 600V 401 to 600A 2.03" - 300V 5.75" - 300V 6.75" - 600V 2.95" - 600V 2.88" - 300V 3.38" - 600V 1.5" 3.44" 2" 3" 3" 0.75" 0.33" Diameter 0.75" C'Bore 0.5" Deep 150 For additional information, visit www.edisonfuse.com Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories Dimensions - inches 35 to 60A 0.22" 0.5" 0.47" 0.84" 1.38" 0.29" DIAMETER 0.38" C'BORE 4.25" 2.125" Catalog Number BG Series and G Series 0.94" 1.78" Class G Fuse Blocks: Figure 4. BG Series and G Series: For use with Class G Fuses (Edison SEC) 1.41" 0.53" 1.69" Construction: (0-30A) Thermoplastic (35-60A) Phenolic Amp Ratings: 1-60A 0.22" DIAMETER HOLE UL Listed, Guide IZLT, File E14853 3.56" Voltage Ratings: 600V (0-20A) 1.78" 480V (25-60A) Agency Approvals: CSA, Class 6225-01, File 47235 2.75" Catalog Data Terminal Type Figure 5. Screw with Pressure Plate Box Box Lug w/ Fig. CROSS REFERENCE Amps Quick-Connect w/Quick Connect Lug Clip No. EDISON MERSEN LITTELFUSE 11 BG3011SQ BG3011PQ BG3011B—1 BG3011SQ NONE LG30015-1SQ to 2 BG3012SQ BG3012PQ BG3012B—2 BG3012SQ NONE LG30015-2SQ 15 3 BG3013SQ BG3013PQ BG3013B—3 BG3013SQ NONE LG30015-3SQ 1 BG3021SQ BG3021PQ BG3021B—1 BG3021SQ NONE LG30020-1SQ 20 2 BG3022SQ BG3022PQ BG3022B—2 BG3022SQ NONE LG30020-2SQ 3 BG3023SQ BG3023PQ BG3023B—3 BG3023SQ NONE LG30020-3SQ 25 1 BG3031S BG3031P BG3031B—1 BG3031S NONE LG30030-1SQ to 2 BG3032S BG3032P BG3032B—2 BG3032S NONE LG30030-2SQ 30 3 BG3033S BG3033P BG3033B—3 BG3033S NONE LG30030-3SQ 35 1— — — G30060-1CR 4 BG3011PQ NONE NONE to 2— — — G30060-2CR 4 BG3012PQ NONE NONE 60 3— — — G30060-3CR 5 BG3013PQ NONE NONE Torque vales for above terminals: 18-8AWG: 20 lb•in BG3021PQ NONE NONE 6AWG: 35 lb•in BG3022PQ NONE NONE Dimensions - inches BG3023PQ NONE NONE BG3031P NONE LG30030-1PQ 1 to 30A BG3032SP NONE LG30030-2PQ 0.77" 1.53" BG3033P NONE LG30030-3PQ 1.22" BG3011B NONE NONE 0.36" 0.42" 0.42" BG3012B NONE NONE BG3013B NONE NONE BG3021B NONE NONE BG3022B NONE NONE BG3023B NONE NONE 3" BG3031B NONE NONE BG3032B NONE NONE 1.5" BG3033B NONE NONE G30060-1CR NONE LG30060-1CR G30060-2CR NONE LG30060-2CR 0.86" 1.63" 2.38" G30060-3CR NONE LG30060-3CR Figure 1. Figure 2. Figure 3. For additional information, visit www.edisonfuse.com 151 Poles Fuse Blocks, Holders and Accessories Technical Data 10241 BCM and BMM modular Class CC and supplemental ferrule fuse blocks Effective August 2014 Ratings: Flammability Ratings: • Volts 600V • Blocks — UL 94V0, self-extinguishing • Amps up to 30A • Covers — UL 94HB, self-extinguishing • Withstand 200kA RMS Sym Operating and Storage Temperature Range: Agency information: BCC Series • Blocks -40°C to +120°C Class CC BCM Series • Non indicating covers -40°C to +120°C • UL Listed E14853 - IZLT • Indicating covers -20°C to +90°C* • CSA Certified 47235-6225-01 Catalog Number BCM and BMM Modular Class CC and Supplemental Ferrule * Indication requires minimum 90Vac/dc and closed circuit to • CE Fuse Blocks illuminate. • RoHS Compliant Materials: • Conflict mineral free Ratings: Flammability Ratings: • Base — Thermoplastic • Reach declaration available upon request Volts: 600V Blocks — UL 94V0, self-extinguishing • Terminals — Tin-plated bimetallic copper Amps: up to 30A Covers — UL 94HB, self-extinguishing 13/32” x 1-1/2” (Midget) BMM Series • Covers — Thermoplastic Withstand: 200kA RMS Sym • UL Recognized E14853 - IZLT2 O • pS ec rra etw in sg a n ad n d p rS es ts ou rra eg p ela T te esm — o e Zrin ac tu -p rle a tR ed a n stg ee e: l • CSA Certified 47235-6225-01 Agency Information: Blocks -40ºC to +120ºC Cover Part Numbers: • CE Class CC BCM Series Non indicating covers -40ºC to +120ºC • For blocks with quick connect terminals — CVR(I)-CCM-QC • UR Lo L His St C ed o m Ep 1l4 ia 8n5 t3 - IZLT Indicating covers -20ºC to +120ºC • CSA Certified 47235-6225-01 * In Ad lli o ca th tie orn t erre m qiu niarle o sp m tio in nism — um C V 9R 0(V I)- a C cC /d M c and closed circuit • Conflict mineral free CE to illuminate. • Reach declariation available upon request Marker Labels: RoHS Compliant • Use part number TM27CB Covers: Conflict mineral free Materials: Reach declaration available upon request Base — Thermoplastic • Covers are included in the overall UL Listing/Recognition Recommended DIN-Rail End Stops: Terminals — Tin-plated bimetallic copper • IP20 finger-safe • Part No. BRKT-ND 13/32˝ x 1-1/2˝ (Midget) BMM Series Covers — Thermoplastic • RoHS Compliant UL Recognized E14853 - IZLT • Screws and pressure plates — Zinc-plated steel Part No. BRKT-NDSCREW2 • Reach declariation available upon request CSA Certified 47235-6225-01 CE Cover Part Numbers: Poles: RoHS Compliant For blocks with quick connect terminals — CVR(I)-CCM-QC • 1-, 2-, 3-pole units factory assembled Conflict mineral free All other terminal options — CVR(I)-CCM • Single-pole units snap together to create desired number of Reach declaration available upon request poles Marker Labels: Covers: Use part number TM27CB Covers are included in the overall UL Listing/Recognition IP20 finger-safe Recommended DIN-Rail End Stops: RoHS Compliant Part No. BRKT-ND Reach declaration available upon request Part No. BRKT-NDSCREW2 Poles: 1-, 2-, 3-pole units factory assembled Single-pole units snap together to create desired number of poles Table 1. Catalog numbers Table 1. Catalog Numbers Terminal type #10-32 Screw with Pressure plate with Phil-slot screw quick connect* Pressure plate quick connect* Box lug Poles Fuse class BCM603-1S BCM603-1SQ BCM603-1P BCM603-1PQ BCM603-1C 1 CC BCM603-2S BCM603-2SQ BCM603-2P BCM603-2PQ BCM603-2C 2 CC BCM603-3S BCM603-3SQ BCM603-3P BCM603-3PQ BCM603-3C 3 CC — BMM603-1SQ — BMM603-1PQ BMM603-1C 1 10x38 (13/32”x1-1/2”) — BMM603-2SQ — BMM603-2PQ BMM603-2C 2 10x38 (13/32”x1-1/2”) — BMM603-3SQ — BMM603-3PQ BMM603-3C 3 10x38 (13/32”x1-1/2”) 3-Pole control circuit transformer block —BCCMM603-3SQ — BCCMM603-3PQ — 3 2-pole CC with 1-pole 10x38 (13/32”x1-½”) *Quick Connect terminals rated for 20A maximum 2 EATON www.eaton.com For additional information, visit www.edisonfuse.com 152 BMM Series Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks, Holders and Accessories Catalog Number BCM and BMM Modular Class CC and Supplemental Ferrule BCM and BMM modular Technical Data 10241 Fuse Blocks — (Continued) Class CC and supplemental ferrule fuse blocks Effective August 2014 Dimensions - mm (in) Dimensions - mm (in) 33 40 21 60 1.3 .8 1.6 2.4 95 77 10 4 3.7 3.0 .4 .2 39 59 1.6 20 20 2.3 .8 .8 16 33 41 .6 1.3 1.6 With cover. See Table 3 for available covers. Table 2. Terminal specifications Wire Wire temp Torque Terminal type range rating AWG lb-in (N•m) CU 2-3 50 (5.6) CU 4-6 45 (5.1) CU 2-14 Box lug (“CR” option) 75/90°C CU 8-14 35 (4.0) AL 2-8 AL 2-6 50 (5.6) AL 8 40 (4.5) Screw (S) Screw/quick connect* (SQ) CU 10-18 75/90°C 10-18 20 (2.3) Pressure plate (P) Pressure plate/ quick connect* (PQ) * Quick connect terminals rated to 20A max. Table 3. Recommended covers* Cover part numbers Terminal type Indicating Non indicating Box lug (CR) CVRI-CCM CVR-CCM Screw (S) CVRI-CCM CVR-CCM Screw/quick connect (SQ) CVRI-CCM-QC CVR-CCM-QC Pressure plate (P) CVRI-CCM CVR-CCM Pressure plate/quick connect (PQ) CVRI-CCM-QC CVR-CCM-QC * For use with 4AWG max conductors. The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Eaton’s Bussmann Business 114 Old State Road Ellisville, MO 63021 United States For additional information, visit www.edisonfuse.com 153 www.bussmann.com © 2014 Eaton Eaton is a registered trademark. All Rights Reserved Publication No. 10241 - BU-SB14605 All other trademarks are property August 2014 of their respective owners. EATON www.eaton.com 3 Fuse Blocks, Holders and Accessories Block Series: BH Series: For use with Edison high speed semiconductor and “bolt-in” fuses Base: Light weight, high temperature thermoplastic Mounting Studs: Plated steel Nut: Plated steel Washer: Spring steel Agency Approvals: UL Recognized, Guide IZLT2/IZLT8, File E14853 up to 700V CSA, Class 6225-01, File 47235 up to 700V Contact Edison Customer Satisfaction for ordering information and dimensional data. Catalog Number BH Series Catalog Code Description: Block Series BH - X X X X Fuseblock Base Stud Size 1 0 Small base for 0-200 amp fuses, 0-700V 1 ⁄4 - 20 (for use with bases 0, 1, & 2) 5 1 Medium base, for 0-400 amp fuses, 0-2500V 2 ⁄16 - 18 (For use with bases 0, 1, & 2) Wire Connector 2 Medium base, for 0-600 amp fuses, 0-5000V 3 3 ⁄8 - 16 (for use with bases 0, 1, 2 & 3) 0 No connector 3 Large base, for 0-700 amp, 0-1250V 7 4 ⁄16 - 14 (for use with base 3) 1 1 Hole for #14 - 2/0 copper wire See Note 2 below. (for use with base 0) 3 2 2 Hole for #14 - 1/0 copper wire 5 ⁄8 - 16 (for use with base 3) (for use with base 0) 3 2 Hole for #6 - 250 MCM copper wire (for use with base 1, 2, & 3) 4 2 Hole for #14 - 500 MCM copper cable (for use with base 3) See Note 1 below Agency Approval 0 No agency approval 1 UL Recognition and CSA Certification 2 UL Recognition only 3 cURus NOTES: 1. The #4 connector must be used with either the 7/16 - 14 or the 3/8” - 16 stud. 2. The only compatible connector for the 7/16” - 14 stud is #4. 3. Always check applicable end use standards for required spacing between blocks, fuses or other hardware. 4. For applications above 700V, consult appropriate electrical standard for proper creepage distances, clearance distances and insulator voltage withstand ratings. Catalog Numbers BH-0001 BH-0122 BH-2001 BH-3004 BH-0002 BH-1001 BH-2002 BH-3033 BH-0003 BH-1002 BH-2003 BH-3144 BH-0111 BH-1003 BH-2031 BH-3145 BH-0112 BH-1131 BH-2032 — BH-0113 BH-1132 BH-2033 — BH-0121 BH-1133 BH-3003 — For additional information, visit www.edisonfuse.com 154 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Box Cover Units for Plug Fuses Box Cover Units For Plug Fuses Fuse Holder Plug fuse box cover units provide a simple, inexpensive way to protect small motors with Edison-type “T”, “TL”, “TC”, “P” On/Off Switch and “W” plug fuses. Box cover units are easily installed in standard electrical boxes. By using fuses sized at the amp Receptacle rating of a motor or slightly larger, optimum overload and short-circuit protection is provided. Box cover units are UL Switch Light Listed. SSY-RL Selection Data — Plug Fuse Box Cover Units Receptacle Motor Agency† Box Cover Fuseholder Outlet to Load Switch Switch Size Listing/ Cat. No. Type Box Single Double 125Vac 250Vac Control+ Light++ (Max.) General Data Certification 3 SOU X ⁄4 Hp 125V, 15A UL, CSA 1 1 SRU 2 ⁄4" HandyXX ⁄2 Hp 125V, 15A UL 1 SSU XX ⁄2 Hp 125Vac (do not use on DC), 15A UL, CSA 3 SOW X ⁄4 Hp 125V, 15A UL, CSA 3 1 SRW 2 ⁄4" SwitchXX ⁄2 Hp 125V, 15A UL 1 SSW XX ⁄2 Hp 125Vac (do not use on DC), 15A UL, CSA 3 SOX X ⁄4 Hp 125V, 15A UL, CSA 1 SRX 4" OctagonXX ⁄2 Hp 125V, 15A UL 1 SSX XX ⁄2 Hp 125Vac (do not use on DC), 15A UL, CSA 3 SOY X ⁄4 Hp 125V, 15A UL, CSA 1 SRY XX ⁄2 Hp 125V, 15A UL 1 SSY XX ⁄2 Hp 125Vac (do not use on DC), 15A UL, CSA 1 SSY-RL 4" SquareXX XX ⁄2 Hp 125Vac (do not use on DC), 15A — 1 STY* X X* ⁄2 Hp* 125Vac (do not use on DC)*, 15A UL 125Vac (do not use on DC); 1 SCY** X X(2)** ⁄2 Hp(2)** UL can protect two motors**, 15A 3 SOY-B X ⁄4 Hp 125V, protects two motors, 15A UL 11 SKA 4 ⁄16" Square X X(15A) 2 Hp 250V, 15A single-phase UL 1 SSN Single GangXX ⁄2 Hp 125V, 15A Weatherproof UL + Switch turns power to fused load OFF or ON. ++ Switch light indicates power to load (dark when switch OFF or fuse open). 1 * Double-pole switch opens both sides of circuit. STY can be used for two separate 125V motors not larger than ⁄2 Hp with the common switch, or a single motor not larger than 2 Hp at 250V (Maximum of 150V to ground). ** The SCY unit can be used for protection of a single motor not larger than 2Hp at 250V (Maximum of 150V to ground). † UL Guide JAMZ, File E6491; CSA Class 6225-01, File 47235. For additional information, visit www.edisonfuse.com 155 Box Cover Units for Plug Fuses 1 3 2 ⁄4˝ Handy Boxes 2 ⁄4˝ Switch Boxes SOU SRU SSU SOW SRW SSW 11 4˝ Octagon Boxes 4- ⁄16˝ Square Boxes SOX SRX SSX SKA 4˝ Square Boxes SOY SRY SSY SSY-RL SOY-B STY SCY SSN For additional information, visit www.edisonfuse.com 156 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Enclosed Power Distribution Blocks EPDB Series Feature/Benefits •Enclosed, safer installation; IP20 finger-safe under specific conditions • High short-circuit current ratings up to 200kA: PDBs do not have to be the weak link in achieving high SCCR for an industrial control panel • Small footprint saves panel space • Listed to UL 1953 which has minimum spacing requirements at 600V of at least 1” through air and 2” over surface required for feeders in UL 508A Industrial Control Panels • For 2D CAD drawings visit www.cooperbussmann.com Agency/Standards • UL Listed 1953, Guide QPQS, File E256146 • CSA Certified, Class 6228-01, File 47235 • IEC 60947-7-1 • IEC 60529, IP20 (finger-safe) under specific wiring conditions Electrical • 600Vac/dc (UL 1953), 690Vac/dc (IEC) • IP20 finger-safe under specific conditions • Short-circuit current ratings up to 200kA, see table • Ampacities up to 760 amps 2 • Cu/Al wire range 14 AWG to 500 kcmil or 2.5 to 240 mm Mechanical • DIN-Rail or panel mount; EPDB306 & EPDB702 panel mount only • Captive termination screws; screws do not get misplaced • Wire ready: captive termination screws shipped backed out to save time on conductor installations • Sliding DIN-Rail latch for easy mounting • Single pole, gang mountable for multiple pole applications with interlocking dovetail accessory (optional) • Flammability, UL 94V0 • Tin-plated Al connectors suitable for Cu/Al conductors • Elongated hole for panel mounting; easier mounting with greater flexibility in matching up with drilled panel holes • Part 2A1279: Interlocking dovetail pin accessory One pin interlocks two units, two pins to interlock three units • DIN-Rail end anchors required to prevent damage to block when torquing For additional information, visit www.edisonfuse.com 157 UL/CSA Fuses UL/CSA Fuses Special Canadian Medium Fuse Blocks, Surge Protective Application Current Limiting General Purpose Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Devices Section Enclosed Power Distribution Blocks Enclosed Power Distribution Blocks EPDB Series EPDB Series Electrical Data Electrical Data Series PDBFS Series PDBFS Terminal Copper Conductor Capability Short-Circuit Current Rating Data Electrical Line Load Configuration Conductors Max Fuse Class & Amp** Catalog Number Openings per Pole Line Load JT RK1 RK5 Amps Wire Range Wire Range SCCR (All Single AWG or AWG or LPJ JJS LPS-RK FRS-R Pole) Line Load kcmil kcmil JJN LPN-RK FRN-R EPDB101 175A 2/0 to 8 AWG Cu/Al 2/0 to 8 AWG Cu/Al 2/0 to 8 2/0 to 8 200 200 100 60 200kA 4 to 12 200 200 100 60 200kA 2/0 to 14 AWG Cu 4 to 14 AWG Cu EPDB104 175A 2/0 to 8 175 175 100 30 100kA 2/0 to 8 Al 4 to 8 AWG Al 4 to 14 200 200 100 60 50kA 350kcmil to 350kcmil to EPDB301 310A 350 to 6 350 to 6 400 400 200 100 200kA 6 AWG Cu/Al 6 AWG Cu/Al 2 to 6 400 400 200 100 200kA 500kcmil to 2 to 14 AWG Cu EPDB306 380A 500 to 6 200 200 100 60 50kA 6 AWG Cu/Al 2 to 12 Al 2 to 14 175 175 100 30 100kA 300 4 to 8 600 600 400 200 200kA 300kcmil to 4 to 14 AWG Cu EPDB512 570A 4 400 400 200 100 100kA 4 to 12 Al 300 to 4 4 AWG Cu/Al 4 to 14 200 200 100 60 50kA 350kcmil to 350kcmil to 350 to 4 350 to 4 600 600 400 200 200kA EPDB602 620A 4 AWG Cu/Al 4 AWG Cu/Al 500 500 600 800* 600 200 200kA 500kcmil to 500kcmil to EPDB702 760A 6 AWG Cu/Al 6 AWG Cu/Al 500 to 6 500 to 6 600 600 400 200 100kA ® Ampacities 75C per NEC Table 310.16 and UL 508A Table 28.1 *Class L 800A (LCL 800) or less fuses suitable for this particular SCCR case. ** Class G 60A (SEC-60) or less or Class CC 30A (EDCC-30, HCTR-30, HCLR-30) or less are suitable for all SCCRs in this table. Lineside Loadside Wire Connector Hole Diameter Part Torque Trim Length Torque Trim Length Lineside Loadside Min. Enclosure Wire Range* Hex Key Wire Range* Hex Key Number Lb•in (N•m) (mm) Lb•in (N•m) (mm) (mm) (mm) Size - inch 2/0 to 8 AWG 2/0 to 8 AWG, Cu EPDB101 110 (12.4) 0.85 (21.6) 3/16˝ 110.(12.4) 0.97 (24.6) 3/16˝ 0.45 (11.5) 0.45 (11.5) 16 x 16 x 6.75 2 70 to 10mm 70 to10mm 4 to 6 AWG, Cu 35 (4.0) 2 25 to 16mm 2/0 to 8 AWG 120 (13.6) 8 AWG, Cu 2 25 (2.8) 0.55 (14) top row 70 to 10mm 2 EPDB104 0.75 (19.0) 3/16˝ 10mm 1/8˝ 0.45 (11.5) 0.246 (6.25) 16 x 16 x 6.75 0.85 (21.6) bottom view 4 to 8 AWG, Al 35 (4.0) 10 to 14 AWG, Cu 10 to 14 AWG, Cu 120 (13.6) 20 (2.3) 2 6 to 2.5mm 350 kcmil to 6 AWG 350 kcmil to 6 AWG 275 (31.1) EPDB301 275 (31.1) 1.35 (34.3) 5/16˝ 1.25 (31.8) 5/16˝ 0.72 (18.3) 0.72 (18.3) 36 x 30 x 12.625 2 2 185 to 16mm 150 to 16mm 20 (2.3) 2 to 3 AWG, Cu 2 35mm 50 (5.7) 4 to 6 AWG, Cu 2 45 (5.1) 25 to 16mm 0.59 (15) top row 500 kcmil to 6 AWG EPDB306 500 (56.5) 1.25 (31.8) 3/8˝ 8 AWG, Cu 1/8˝ 0.87 (22.1) 0.314 (8.0) 24 x 20 x 6.75 2 240 to 16mm 1.2 (30.5) bottom row 2 10mm 40 (4.5) 10 to 14 AWG, Cu 2 6 to 2.5mm 35 (4.0) 2 to 12 AWG, Al 50 (5.7) 4 to 6 AWG, Cu 25 to 16mm2 35 (4.0) 8 AWG, Cu 300 kcmil to 4 AWG 1.15 (29.2) top row 0.55 (14) top row EPDB512 (275 (31.1) 1/4˝ 10mm2 25 (2.8) 1/8˝ 0.687 (17.5) 0.265 (6.7) 24 x 20 x 6.75 150 to 25mm2 1.4 (35.6) bottom row 1 (25.4) middle row 10 to 14 AWG, Cu For addition 6a tol 2in .5f m o m r2 mation 20, (v 2.i3 s )it www.edisonfuse.com 157 4 to 12 AWG, Al 35 (4.0) 350 kcmil to 4 AWG 350 kcmil to 4 AWG EPDB602 275 (31.1) 1.25 (31.8) 5/16˝ 275 (31.1) 125 (31.8) 5/16˝ 0.718 (18.2) 0.718 (18.2) 36 x 30 x 12.625 2 2 185 to 25mm 185 to 25mm 500 kcmil to 6 AWG 350 kcmil to 4 AWG EPDB702 500 (56.5) 1.25 (31.8) 3/8˝ 500 (56.5) 1.25 (31.8) 3/8˝ 0.875 (22.2) 0.875 (22.2) 36 x 30 x 12.625 2 240 to 16mm2 240 to 16mm *Cu/Al unless otherwise noted. For additional information, visit www.edisonfuse.com 158 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Enclosed Power Distribution Blocks EPDB Series Dimensions – in (mm) Part Width Length Height Number ABC DE F G H EPDB101 1.03 (26.16) 3.372 (94.8) 2.15 (54.5) 3.55 (90.17) 2.91 (73.79) 0.2 (5) 0.2 (5) N/A EPDB104 1.03 (26.16) 3.372 (94.8) 2.15 (54.5) 3.55 (90.17) 2.91 (73.79) 0.2 (5) 0.2 (5) N/A EPDB301 1.55 (39.37) 4.67 (118.5) 2.874 (73) 4.48 (113.67) 3.81 (96.77) 0.2 (5) 0.24 (6) N/A EPDB306 1.55 (39.37) 4.67 (118.5) 2.95 (74.93) 4.48 (113.67) 3.81 (96.77) 0.2 (5) 0.24 (6) N/A EPDB512 1.88 (47.62) 4.67 (118.5) 2.93 (74.5) 4.48 (113.67) 3.81 (96.77) 0.2 (5) 0.24 (6) N/A EPDB602 2.38 (60.45) 4.67 (118.5) 2.60 (66) 4.48 (113.67) 3.81 (96.77) 0.2 (5) 0.24 (6) N/A EPDB702 2.56 (65.02) 4.67 (118.5) 3.15 (80) 4.48 (113.67) 3.81 (96.77) 0.2 (5) 0.24 (6) 1.81 (46) EPDB101 EPDB104 EPDB301 EPDB306 EPDB512 EPDB602 EPDB702 For additional information, visit www.edisonfuse.com 159 UR CSA High SCCR Terminal Blocks PB1 & PB3 Series Electrical: • Short-circuit current ratings up to 200kA, see table next page • Ampacities up to 310A • 600Vac/dc (UL 1953) • 75ºC rated connectors • Cu Wire range 14AWG to 350kcmil Mechanical: • Flammability, UL 94V0 • Panel mount • Tin-plated aluminum (Al) connectors suitable for copper (Cu) conductors Agency and Standards • UL 1059 Recognized, Guide XCFR2, File E221592 • General Industry Class per UL 1059, usage Category C • CSA Certified, Class 6228-01, File 700489 Features and Benefits • High short-circuit current ratings up to 200kA • UL 1059 Recognition • 1-, 2- and 3-poles Dimensions (inches) PB1011-10S3 Series (1-, 2-, and 3-pole) PB1061-3093 Series (1-, 2-, and 3-pole) HJ TOP A 3-Pole A 2-Pole LINESIDE C SIDE A 1-Pole A B E F D D C B E F D K L K Dia. G L C'Bore LOADSIDE Part Width/Poles Length Height Number A/1 A/2 A/3 BC D E F G H J K L PB1011-10S3 1.06 1.88 2.60 2.88 1.75 0.81 2.25 0.53 0.31 0.84 0.31 0.20 0.42 PB1061-3093 1.96 3.58 5.20 4.00 3.32 1.62 3.37 0.97 --- Slot 0.20x0.41 Slot 0.42x0.62 160 For additional information, visit www.edisonfuse.com Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section High SCCR Terminal Blocks PB1 & PB3 Series Electrical Data Term inal Copper Conductor Capability Short-Circuit Current Rating Data Lineside Loadside Configuration Conductors M ax Fuse Class & Am p* Part Number O penings per Pole Line Load JT RK1 RK5 Minimum side side Number Amps of Poles W ire Range W ire Range SCCR Enclosure Size AW G or AW G or TJS LESRK ECSR Inches kcm il kcm il JDL TJN LENRK ECNR Line Load kA PB1011 1 PB1012 175A 2 2/0 TO 8 AW G 2/0 TO 8 AW G 2/0 to 8 2/0 to 8 200 200 200 60 200 16 X 16 X 6.75 PB1013 3 PB1041 1 4 to 12 200 200 200 60 200 175A 2/0 TO 8 AW G 4 TO 14 AW G 2/0 to 8 16 X 16 X 6.75 PB1042 2 175 175 100 60 100 4 to 14 PB1043 3 200 200 100 60 50 PB10S1 1 16 X 16 X 6.75 PB10S2 175A 2 2/0 TO 8 AW G 1/4-20 X 3/4 STUD 2/0 to 8 Stud 200 200 100 60 200 PB10S3 3 PB1061 1 400 400 200 100 200 4 to 12 175A 2/0 TO 8 AW G 4 TO 14 AW G 2/0 to 8 24 X 20 X 6.75 PB1062 2 400 400 400 100 100 PB1063 3 4 to 14 175 175 100 60 100 PB3061 1 400 400 200 100 200 4 to 8 PB3062 310A 2 350 kcm il to 4 AW G 4 TO 12 AW G 350 to 4 400 400 400 100 100 24 X 20 X 6.75 PB3063 3 4 to 12 175 175 100 60 100 4 to 8 PB3121 1 400 400 200 100 200 24 X 20 X 6.75 310A 350 kcm il to 4 AW G 4 TO 14 AW G 350 to 4 PB3122 2 4 to 14 175 175 100 60 100 PB3123 3 PB3091 1 400 400 200 100 200 (6) 2 to 12 AW G 1/0 to 6 24 X 20 X 6.75 PB3092 310A 2 350 kcm il to 4 AW G 350 to 4 400 400 400 100 100 (3) 1/0 to 12 PB3093 3 4 to 12 175 175 100 60 100 Am pacities 75C per NEC® Table 310.16 and UL508A Table 28.1 *Class G 60A (SEC-60) or less or Class CC 30A (EDCC30, HCTR30, HCLR30) or less are suitable for all the SCCRs in this table Optional Covers & Dimensions (inches) PBC2_ Cover B Part Block Poles Number A (In) B (In) B PB1011, 1041, 10S1 1 PBC21 0.94 2.75 PB1012, 1042, 10S2 2 PBC22 1.75 2.75 PB1013, 1043, 10S3 3 PBC23 2.56 2.75 A PB1061, 3061, 3091, 3121 1 PBC31 4.14 2.10 PB1062, 3062, 3092, 3122 2 PBC32 4.14 3.72 A PB1063, 3063, 3093, 3123 3 PBC33 4.14 5.34 #4 Thread-cutting screws assembled PBC3_ #4 Thread-cutting screws assembled Textured surface for marking A Textured surface for marking A B B For additional information, visit www.edisonfuse.com 161 Power Distribution Blocks PB4, PB5 & PB7 Series Voltage Ratings: • 600Vac/dc maximum • 75°C Rated connectors Mechanical: • Panel mount • Tin-plated aluminum connectors • Flammability: UL 94V0 Agency Information: • UL Recognized, Guide XCFR2, File E221592, General Industrial Class per UL 1059 • CSA Certified: CSA File 700489, Class 6228-01 Dimensions (inches) HJ LINESIDE D Feature and Benefits • Available in 1-, 2-, or 3-pole versions C • Thermoset material to withstand high heat applications F E E • Optional cover is clear with write-on surface for field termination identification (Order PBC Series) • For industrial controls, HVAC and other control automation panel applications A B • Mounting slots allow greater flexibility to fit pre-drilled panel holes L G K LOADSIDE Series A B C1 C2 C3 D E F G H J K (Slot) L (Slot) PB401X, PB512X 4.00 3.38 1.98 3.6 5.21 3.32 1.62 0.99 0.31 0.87 0.35 0.20" wide x 0.41" long 0.42" wide x 0.62" long PB712X 5.5 4.75 3.1 5.79 8.48 2.93 2.69 1.55 0.38 1.19 0.44 0.20" wide x 0.33" long 0.41" wide x 0.53" long 162 For additional information, visit www.edisonfuse.com Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Power Distribution Blocks PB4, PB5 & PB7 Series Electrical Data Part Number Connection Connector M aterial & Ampacity Number Poles Lineside Loadside W ire Range per pole Torque (Lb-In) W ire Range per pole Torque PB4011 1 2 (1) 500kcm il - #6 Cu-Al 500 (1) 3/8 - 16 x 1 Stud --------- AL-380A PB4012 PB4013 3 1 PB5121 PB5122 2 (2) 300kcm il - #4 Cu-Al 275 (12) #4 - #14 Cu, #4 - #12 Al 20 AL-570A PB5123 3 B PB7121 1 PB7122 2 (2) 500kcm il - #6 Cu-Al 500 (12) #4 - #14 Cu-Al 35 AL-760A PB7123 3 A Optional Covers & Dimensions (inches) Cover Series Poles Part Number AB C PB3 #4 Thread-cutting screws assembled 1 PBC31 4.14 2.10 – PB4 & PB5 2 PBC32 4.14 3.72 – 3 PBC33 4.14 5.34 – 1 PBC71 2.52 5.50 0.84 PB7 3 3 (PBC71) Textured surface for marking A B For PB4 & PB5 Blocks PB4 & PB5 For PB4 & PB5 Blocks A A B B PB7 C C For PB7 Blocks For PB7 Blocks For additional information, visit www.edisonfuse.com 163 LINE Buss SAMI -2 LOAD Fuse Covers, Indicating and Non-Indicating TEST PROBE TEST PROBE B C A FUSE SAMI Features: Catalog Number SAMI™ Series • Innovative design, covers exposed terminals and contacts of Edison fuse blocks. Indicating Fuse Covers: • Fits most competitive fuse blocks. SAMI™ Series: For Class J, RK1, RK5, H, K5, CC, G, T • Light on indicating SAMI shows when the fuse is and midget type fuses. open–helps troubleshoot the system and reduces downtime. Operating Voltage: • All versions are reusable—no need to pay for indication Non-Indicating - 0-600Vac/dc Indicating - 90 to 600Vac every time a fuse opens. - 115 to 600Vdc • Indication contacts have teeth to break oxidation layer on Amp Rating: 0 - 100A the existing fuse endcap to provide a clear signal path. Agency Approvals: UL Listed • Less than 0.6mA leakage current at 600 volt. CSA (Class 6225-01, • Visual marking of lineside and loadside. File No. LR47235) • SAMI cover ends can easily be trimmed if necessary, to Material: Black Thermoplastic with a flammability fit cover over existing wiring or to fit most safety switches. rating of UL 94V2 • Dead front construction provides added protection against Catalog Data (600V) Dimensional Data (inches) accidental contact by maintenance personnel. Catalog • Labels are provided with the SAMI fuse cover for writing Number* Description ABC in circuit or fuse information. 600V, J (0-30A) and 600V, T • One cover is required for each pole. (35-60A)*** 250V, RK, K5, H SAMI-1 5.02 1.03 1.94 (35-60A) SAMI-2 600V, RK, K5, H (0-30A) 7.03 1.30 2.07 WARNING: To avoid electrical shock, turn power SAMI-3 600V, J (65-100A) 7.03 1.30 2.33 off before installing, removing or servicing. SAMI-4 250V, RK, K5, H (65-100A) 8.20 1.30 2.18 SAMI-5 600V, RK, K5, H (35-60A) 8.20 1.30 2.18 For SAMI trimming guide specifications refer to SAMI-6 600V, J (35-60A) 4.98 1.17 2.14 the following data sheet numbers: 600V, Midget, Class CC, 7008 - SAMI 1-9 Trimming Guides. SAMI-7** 3.82 0.75 1.72 G (0-30A) SAMI-8† 600V, RK, K5, H (65-100A) 10.38 1.50 2.33 250V, RK, K5, H (0-30A) SAMI-9 3.82 0.75 1.72 and 600V, T (0-30A) *Catalog Numbers For Indicating Cover, add suffix I. For Non-indicating cover, add suffix N. Example: SAMI-7I = Indicating SAMI-7N = Non-indicating Indicating feature requires a minimum of 90Vac or 115Vdc to illuminate lamp. UL Recoginized ** ***Non-indicating only † SAMI-8A adapter available for small RK, K5, H body design. SAMI-8N comes standard with adapter (SAMI-8A) For additional information, visit www.edisonfuse.com 164 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section In-Line Fuse Holders for 13 1 ⁄32˝ x 1 ⁄2˝ and Class CC Fuses Single-Pole Double-Pole 13 1 13 1 ⁄32" x 1 ⁄2" Fuses Class CC ⁄32" x 1 ⁄2" Midget Fuses HEB- HET- HEY- HEX- Water-resistant, in-line fuse A HEB- fuse holder with a Double-pole fuse holder has Water-resistant, in-line 13 1 holder for any ⁄32" x 1 ⁄2" permanently installed solid water-resistant, polarized 2-Pole fuse holder for any 13 1 fuse. Fuse holder rated 30A, neutral. Easily identified by design, and accepts Class ⁄32" x 1 ⁄2" fuse. Fuse holder 600V (CSA Listed 15A white plastic coupling nut. CC branch circuit fuses rated 30A, 600V (CSA max.). Typical fuse types: (Edison fuse types EDCC, Listed 15A max.). Typical Edison MOL MEN, MEQ HCTR or HCLR, 600V or fuse types: Edison MOL 1 and MCL. ( ⁄10 -30A) less) Particularly applicable MEN, MEQ and MCL. 1 in street lighting circuits with ( ⁄10 -30A) optional breakaway receptacle. Available Part Numbers Single- and Double-Pole without Breakaway Option Non-Breakaway Units: Packaging & Ordering Information: (1) (2) (3) (2) (2) HEB-AA , HEB-AB , HEB-AC , XXX (2) (2) HEB-AD , HEB-AE , HEB-AJ, HEB-AK, HEB-AL, HEB-AR, (2) (2) (2) (2) HEB Load Side Line HEB-AY, HEB-BA , HEB-BB , HEB-BC , HEB-BD , HET Terminal Terminal (2) (2) HEB-CC , HEB-DD , HEB-JJ, HEB-JK, HEB-JL, HEB-JY, HEY A thru W A thru W (2) (2) (2) HEB-LL, HEB-NN, HEB-PP , HEB-QQ , HEB-RR , HEX (2) HEB-SS, HEB-TT , HEB-ZA. Agency Information: Single-Pole with Breakaway Option (1) UL Recognized, Guide IZLT2, File E14853 (2) CSA Certified, Class 6225-01, File 47235 Packaging & Ordering Information: (3) CE XXX W HEB or Load Line Break-W-Way Breakaway Units: HET Terminal Terminal Terminal (Includes fuse holder, breakaway part and insulating boots): A thru K RLC - (1) (2) (3) HEB-AW-RLA, HEB-AW-RLC-A , HEB-AW-RLC-B, A thru J or RYC HEB-AW-RLC-C, HEB-AW-RLC-J, HEB-AW-RYA, HEB-AW-RYC, HEB-BW-RLC-A, HEB-BW-RLC-B, HEB-BW-RYC, HEB-JW-RLC-J, HEB-JW-RYC, Double-Pole with Breakaway Option HEB-KW-RLC-J, HEB-KW-RYC, HEB-LW-RLA, HEB-LW-RLC-J, HEB-LW-RYA Packaging & Ordering Information: (2) (2) (2) Fuse Holder Only: HEB-AW , HEB-BW , HEB-DW , XXX W HEB-JW, HEB-LW HEX or Load Line Break-W-Way Breakaway Part: RLC-A, RLC-B, RLC-C, RLC-J, HEY Terminal Terminal Terminal RYC, RLA, RYA A thru K DRLC - A thru J Agency Information: or DRYC (1) UL Recognized, Guide IZLT2, File E14853 (2) CSA Certified, Class 6225-01, File 47235 (3) CE For additional information, visit www.edisonfuse.com 165 In-Line Fuse Holders Catalog and Specification Data Note: The construction elements listed below illustrate the full Optional construction of the available part numbers. NOT all Conductor Data construction elements are available in all combinations. Breakaway Conductor Terminals Terminal Conductor Data Single- *Double- Terminal Type Terminal Size Pole Pole Symbols Copper Crimp #12 to #8 1• • -RLC-A -DRLC-A Load Line #6 1• • -RLC-B -DRLC-B Type Terminal Size Side Side #4 1• • -RLC-C -DRLC-C Copper Crimp #12 to #8 1• • A A Copper Set-Screw #12 2• • #10 2• • #6 1• • BB #12 to #2 1• • -RLC-J -DRLC-J #4 1• • #8 2• • C C #4 1—• #6 2• • D D #12 to #2 2• •` -RYC -DRYC #2 1—• #4 2• • EE Copper Set-Screw * Terminal illustrations show the end view of single-pole receptacles and one-pole only of the double-pole receptacles. Thus, for example, in the case of a double-pole, set-screw type receptacle with terminals that accept two conductors, a total of four conductors could #12 to #2 1• • JJ be connected to the receptacle per the following drawing. #12 to #2 2• • KK Solid Breakaway (Required with WW Breakaway Receptacle) Catalog Data — Insulating Boots Catalog Available Part Numbers Numbers Type 2A0660 Single Conductor HEX Series: 2A0661 Two Conductor (1) (2) HEX-AA , HEX-AB, HEX-AC, HEX-AD, HEX-AW-DRLC-A, HEX-AW-DRYC, HEX-AW-RLC-A, HEX-AW-RYC, HEX-AE, HEX-AY, HEX-BB, HEX-CC, HEX-JJ, HEX-JK, HEX-JW-DRYC, and HEX-KK. Insulating boots are optional and not included with Agency Information: non-Breakaway holders and must be ordered separately. (1) UL Recognized, Guide IZLT2, File E14853 They are included as a standard item with the breakaway (2) CSA Certified, Class 6225-01, File 47235 series. When boots are utilized, extra heat retention requires HEY Series: that fuses are sized at a minimum of 200% of the RMS HEY-AA, HEY-AB, HEY-AC, HEY-AD, HEY-AE, HEY-AL, load current. HEY-AW-DRLC-A, HEY-AW-DRLC-B, HEY-AW-DRYC, HEY-BB, and HEY-JJ. HET Series: HET-AA, HET-AB, HET-AW, HET-AW-RLC-A, HET-AW-RLC- B, HET-AW-RLC-C, HET-AW-RLC-J, HET-AW-RYC, HET-BB, HET-BW-RLC-B, HET-BW-RYC, HET-JJ, HET-JK, HET-JW-RLC-J, HET-JW-RYC, and HET-KK. For additional information, visit www.edisonfuse.com 166 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting No. Per Terminal Solid Stranded No. Per Terminal Solid Stranded Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section In-Line Fuse Holders sleeve also insulates the body of the lineside section of the Watertight Fuse Protection fuse holder. Should the holder be subjected to an undue pull, it will separate from the lineside, Breakaway receptacle and become electrically dead. Separating the holder and receptacle on a non-engergized circuit facilitates repair/maintenance. HEB in-line fuse holders are water resistant and easy to Solid “W” Terminals Mate With Breakaway install. Protect fuses in locations exposed to water, weather, corrosive fumes, salt-spray, etc. Holders are two- sectioned, molded plastic. The captive nut couples the loadside section to the lineside section; compression of the o-ring when the nut is tightened forms a vapor and water resistant unit. Receptacles A solid copper “rod” terminal must be used on the line-side Double-Pole Fuse Holders For Simultaneous of a fuse holder when holder is equipped with a breakaway Non- Load-Break Disconnect of Two Conductors receptacle. This solid rod terminal mates with the internal female terminal(s) of the breakaway receptacle. The letter “W” in the catalog number of the fuse holder designates this type terminal. HEX and HEY units permit the fusing of two conductors. Loadside conductors can be disconnected from the lineside conductors by disengaging a captive stainless steel screw. Positive non-load-break disconnect (for non-energized circuits) provides maintenance safety. Helps prevent shock. Makes loads electrically dead. Crimp And Set-Screw Terminals Fuse holders are polarized. They can be used for line-to- Crimp and setscrew type terminals are available for copper line or line-to-neutral loads. Polarization prevents conductors. inadvertent reversal of loadside conductors (provides ® compliance with NEC Section 240-22). Both loadside terminals are always identical; both lineside terminals are always identical. 2A0661 Serve As A Non-Load-Break Disconnect 2A0660 Insulating Boots Save Installation Time Boots come in two configurations - for single conductor and the “Y” type for two conductors. Fit all Edison in-line fuse holders. Designed to snugly fit over conductor insulation. The body of the fuse recesses within the loadside section Fits to wire by cutting off tapered tip. Diameter of conductor so that it does not make electrical contact with the lineside insulation cannot exceed 0.450". Inside of boots are treated section until the coupling nut engages the threads on the with silicone to facilitate drawing of wire. lineside section. The holder section thus provides a positive Boots come as a standard item with breakaway means of breaking or opening a non-energized electrical receptacles. They are optional and must be ordered circuit for maintenance and repair. separately for fuse holders without breakaway receptacles. When boots are utilized, extra heat Breakaway Receptacles For Impact Seperation retention requires that fuses are sized at a minimum of 200% of the RMS load current. “Tap-Off” Connections Fuse holders with terminal accepting two conductors can be used as a tap-off connector. Saves cost and manhours. Are available as an option with fuse holders. Ideally suited for breakaway lighting standards as required by state and federal highway commissions). Receptacle consists of a female terminal jacketed in an integral rubber insulating sleeve, and an external wire/cable terminal. The female terminal tightly mates with a lineside, solid, copper rod terminal (symbol “W”) of the fuse holder. The insulating For additional information, visit www.edisonfuse.com 167 U F E S U F Panel-Mount and In-Line Fuse Holders Catalog Number HKP, Catalog Number HPF HKP-HH, and HKP-W Standard Fuse Holders With Standard Fuse Holders: Screw-Type Knob: 1 1 13 5 1 For use with ⁄4" x 1 ⁄4" fuses For use with ⁄32" x 1 ⁄16" to 1 ⁄2" fuses. (Edison type ABC, AGC, MDL, MDA etc.) Agency Approvals: UL Recognized, Guide IZLT2, Terminals: Bayonet-type knob. File E14853, cURus Vibration resistant. UL 94V0 Flammability Rating 5 For panels up to ⁄16" Electrical Ratings (7.9mm) thick. Agency Approvals: Catalog Number Amps Volts Fuse Description UL Recognized, Guide IZLT2, File E14853 HPF 30 600 1 1/2" (38.1mm) MOL, MEN, MCL CSA Certified, Class 6225-01, HPF-L 5 600 EBS, 13/32" x 1 3/8" File 47235 fuses Electrical Ratings for HPF Series HPF-EE 15 600 SEC 0-15, 13/32" x 1 3/8" fuses Catalog HPF-JJ 20 600 SEC 20, Number Amps Volts Fuse Description 13/32” x 1 13/32" fuses HKP 30 250 — HPF-FF* 30 480 SEC 25 & 30, HKP-HH 15 250 HKP with 1/4" 13/32" x 1 5/8" fuses Quick-connect HPF-RR 30 600 HCLR, HCTR & EDCC terminal Class CC fuses HKP-W 30 250 HKP with drip-proof HPF-WT 30 600 Splash-proof knob knob. for 1 1/2" fuses *No CSA Certification. Dimensions - in (mm) A Max B With Fuse Dimensions - in (mm) 2.81" (71.4mm) 0.78" 1.00" 1.31" 1.78" (25.4mm) (33.3mm) (45.2mm) Punched Mounting Hole 0.88" 0.180" DIA. (22.2mm) (4.6mm) 1.125" 2.69" (28.6mm) (68.3mm) + 0.505" 0.005" Without Fuse + (12.8mm 0.13mm) Mounting Hole Mounting Hole Flange Rear of Panel Flange Front of Panel + 0.473" 0.005" 1.031" + 0.003" + (12.0mm 0.13mm) + (26.2mm 0.08mm) 0.187" + 0.002" AB + (4.75mm 0.05mm) HKP 2.33 0.75 HKP-HH 2.44 0.69 1.312" + 0.003" + 1.312" 0.003" + + 0.890" 0.003" + (33.3mm 0.08mm) (33.3mm 0.08mm) + (22.6mm 0.08mm) HKP-W 2.33 0.75 For additional information, visit www.edisonfuse.com 168 E S U F Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting E S Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Blocks for Midget and Electronic Fuses Catalog Number S-8000 Series Bolt-in and Snap-in Mounting Fuse Blocks: 1 1 For ⁄4" x 1 ⁄4" fuses. Catalog Number 3835 Series Construction: Blocks are molded flame retarded thermopastic. Clips are spring-bronze. Multiple Pole Fuse Blocks: Voltage Rating: 300Vac/dc 13 1 For ⁄32" x 1 ⁄2" (10.3 x 28.1mm) fuses. Agency Approvals: UL Recognized under Components Program; File E14853, Amp Rating: 30A Guide IZLT2 CSA Certified Class 6225-01, File 47235 Voltage Rating: 250Vac/dc Anti-Rotation Pin: Single-pole blocks may be ordered without the antirotational pin simply Material: Silver-plated, beryllium copper clips. by adding an “X” to the number of No side barriers. Screw terminals. poles (Example: BK/S-8001-1X). Phenolic base. Carton Quantity: 10; shelf package: 100. Bulk Carton: Single-pole and 2-pole fuse blocks Catalog Data — 1,000; Multiple-pole fuse blocks Catalog No. of — 3-8 pole: 200; 9-12 pole: 50. Number Poles Base Length - Inches (mm) When ordering bulk quantities, prefix “BK/” to catalog number: (Example: BK/S-8001-1SNP). 3835-1 1 27/32 (21.4) Bolt-in Mounting 3835-2 2 1-13/16 (46.0) 3835-3 3 2-25/32 (70.6) *Basic Poles Series Terminal Amps Angle Cat. No. (Suffix) 3835-4 4 3-3/4 (95.2) UL 25A 0° S-8001- 3835-5 5 4-23/32 (119.9) S-8000 Solder CSA 21A 40° S-8002- 3835-6 6 5-11/16 (144.5) 3/16" Quick UL 20A 0° S-8101- 3835-7 7 6-21/32 (169.0) S-8100 Connect CSA 16A 40° S-8102- 1 - 12 3835-8 8 7-5/8 (193.7) 0° S-8201- 1/4" Quick UL 20A 3835-9 9 8-19/32 (218.8) S-8200 40° S-8202- Connect CSA 16A 3835-10 10 9-9/16 (242.9) Side S-8203- 3835-12 12 11-1/2 (292.1) UL 30A S-8301 Screw — S-8301- CSA 10A *Base width — 2-3/4" (69.9mm) Snap-in Mounting (Poles available in single-pole only) Series Terminal Amps Angle Cat. No. Dimensions - inches (mm) UL 25A 0° S-8001-1-SNP S-8000 Solder CSA 21A 40° S-8002-1-SNP 2.75" 3/16" Quick UL 20A 0° S-8101-1-SNP (69.9mm) S-8100 Connect CSA 16A 40° S-8102-1-SNP 1/4" Quick UL 20A 0° S-8201-1-SNP S-8200 Connect CSA 16A Side S-8203-1-SNP 1.0" (25.4mm) 0.25" (6.4mm) Catalog Part Number System BK/ S-8 0 00 -00 -SNP -R Prefix for Bulk Packing S-8000 Series Type Terminal NOTE: Mounting screw hole diameter is 0.148" (3.7mm). “0”-Solder; “1”-3/16" Countersink, 0.313" (7.9mm). Max. Mounting scrw No. 6. Quick Connect; “2”-1/4" Quick Connect; “3”-Screw Terminal Angle “01”-straight (0‚); “02”-40°; “03”-side * Number of Poles (01-12) Snap-In RoHS * Available only in a single pole For additional information, visit www.edisonfuse.com 169 HVAC Disconnect Fused and Non-Fused Metallic Metallic Fused Disconnect Non-Fused Disconnect Catalog Number B22 Series Metallic Rainproof Air Conditioner Pullout Units: Ratings: Single-Phase 2-Wire, 240Vac, 30 & 60A Fused, Non-Fused, GFCI and Cable Whip. UL Guide WGEW Agency Approvals: UL Listed to UL 1429 Wire Range: #14-3 AWG, Al/Cu CSA Certification Features: • NEMA 3R enclosure. • Compact design but offers ample working space. • Internal shield can be removed without tools. • Specifications are printed on internal shield. • Knockouts on back, bottom and both sides. • Finger-safe construction. • Padlockable. Catalog Data 1 Main Maximum HP Approx. Dim. Rating Catalog Number/Description 120Vac 240Vac H x W x D (in.) 3 3 7 30A B221-30F* Fused Disconnect (Class H or R) 1.5 3 8 ⁄4 x 5 ⁄8 x 32 ⁄8 1 3 30A B221-30FGF Fused Disconnect with GFCI (Class H or R) 1.5 3 13 x 7 ⁄2 x 4 ⁄4 3 3 7 60A B222-60F* Fused Disconnect (Class H or R) 3 10 8 ⁄4 x 5 ⁄8 x 32 ⁄8 1 3 60A B222-60FGF Fused Disconnect with GFCI (Class H or R) 3 10 13 x 7 ⁄2 x 4 ⁄4 1 3 60A B222-60NF Non-fused Disconnect 3 10 13 x 7 ⁄2 x 4 ⁄4 3 1 1 60A B222-60NFGF Non-fused Disconnect with GFCI 3 10 11 ⁄4 x 6 ⁄2 x 4 ⁄2 *Suitable for use as service equipment with optional field installed lug kit number B-DPOG. 1 Rated with Edison ECNR and LENRK dual-element time-delay fuses. For additional information, visit www.edisonfuse.com 170 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Reducers Class H, J, K, and R Features: • Fuse reducers install on fuses and permit smaller size fuses to be used in larger amp size switches and blocks. • Reducers will fit into any panel or switch including the dead-front type. • Strong contact is maintained both mechanically and electrically. • UL Listed. • There are no reducers to go from 250V to 600V. • There are no reducers for switching from one fuse class to another. • There are no reducers for Class T or Class L fuses. Fuses Reducers for Class H, J, K, & R Fuses Fuse Reducers for Class H & K Dimension Fuses KON, ERN, PONC, CDNC; KOS, ERS, CDSC Agency Approvals: UL Listed, Catalog No. (Pairs) Guide #IZZR, File #E12853 250V 600V CSA Certified, Fuse Desired Reducer Reducer Class 6225-01, File 47235 Size Size No. No. 30A 60A NO.263 NO.663 Fuse Reducers for Class J Dimension Fuses- JDL, JFL, & CJ 30A 100A NO.213 NO.216 Catalog No. (Pairs) 60A 100A NO.216 NO.616 Fuse Desired Reducer 60A 200A NO.226 NO.626 Size Size No. 100A 200A NO.2621 NO.2621 30A 60A **J-63 100A 400A *NO.2641 *NO.2641 30A 100A **J-13 200A 400A NO.2642 NO.2642 60A 100A **J-16 100A 600A *NO.2661 *NO.2661 60A 200A **J-26 200A 600A *NO.2662 *NO.2662 100A †200A **J-21 400A 600A *NO.2664 *NO.2664 100A †400A **J-41 * Product does not have CSA certification. 200A †400A **J-42 200A 600A **J-62 400A †600A **J-64 CROSS REFERENCE † Not for Bolt-on Applications. EDISON MERSEN LITTELFUSE ** Product does not have UL or CSA certification. NO.263 None LRU263M NO.213 H1032 LRU213M Fuse Reducers for Class R Dimension Fuses NO.216 H1062 LRU216 ECNR, LENRK, NCLR; ECSR, LESRK, & SCLR NO.226 None None NO.663 None LRU663M Catalog No. (Pairs) NO.616 H1066 LRU616 250V 600V NO.626 None None Fuse Desired Reducer Reducer NO.2621 None LRU2621 Size Size No. No. NO.2641 None None 30A 60A NO.263-R NO.663-R NO.2642 None LRU2642 30A NO.213-R NO.216-R 100A NO.2661 None None 60A NO.216-R NO.616-R NO.2662 None None 60A NO.226-R NO.626-R NO.2664 None None 200A 100A *NO.2621-R 100A *NO.2641-R 400A 200A *NO.242-R *NO.642-R 100A *NO.2661-R 200A 600A *NO.2662-R 400A **NO.2664-R * Product does not have CSA certification. **Single reducer only (pair not required) Note: Carton quantity - 10 pair. For additional information, visit www.edisonfuse.com 171 Fuse Accessories FP-4 FP-3 FP-2 FP-6 FP-A3 Catalog Number SFC-FUSE-CAB Fuse pullers Spare Fuse Cabinet Catalog Data Catalog For Fuse Carton Size: 24" wide x 30" high x 12" deep Number Diameter Qty. Fuse Type 0 – 60A, 250V FEATURES: FP-2 13/32" to 13/16" 10 0 – 30A, 600V • Sturdy storage cabinet construction holds spare fuses. 70 – 200A, 250V FP-3 1" to 1-3/4" 10 • Cabinet door equipped with locking handle. 35 – 200A, 600V • Durable baked ASA 61 grey enamel. 225 – 600A, 250V FP-4 1-3/4" to 2-1/2" 1 • Mounting holes with key slot 16-inches on center. 225 – 400A, 600V Class T Fuses FP-6 13/32" to 13/16" 1 0 – 60A, 300/600V Catalog Number SFC-SHELF 1/4" diameter and Electronic glass FP-A3 10 Extra shelf for spare fuse cabinet automotive blade fuses and blade type Spare Key: Catalog Number: 2A1910-1 CROSS REFERENCE NEW EDISON OLD EDISON FP-2 38072 FP-3 38073 FP-4 38074 Fuse Clip-Clamps Catalog Data Clamp Size Weight Volts Amps Cat. No. Ctn. Qty. Lbs. Kg. 0-30A NO.1 12 0.66 .30 250 35-60A NO.2 12 0.96 .44 0-30A NO.2 12 0.96 .44 600 35-60A NO.4 12 1.44 .65 70-100A NO.5 12 1.20 .54 250 110-200A NO.6 6 1.26 .57 or 225-400A NO.7 6 1.86 .84 600 450-600A NO.8 6 2.52 1.14 CROSS REFERENCE NEW EDISON LITTELFUSE NO.1 LCC1 NO.2 LCC2 NO.4 LCC4 NO.5 LCC5 NO.6 LCC6 NO.7 LCC7 NO.8 LCC8 For additional information, visit www.edisonfuse.com 172 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section 1-1/16” Dia. 1-11/16” 3-3/8” 1-11/16” 2-1/16” 2-1/16” 4-1/8” 3-3/16” 4-1/16” 7/8” Surge Protective Devices SurgePOD™ HEAVY DUTY Description SPD Type 2 The SurgePOD™ HEAVY DUTY is a Type 1 UL Listed rd 1449 3 Edition surge protective device suitable for installation on both the loadside or lineside of the service entrance overcurrent protective device. Available in voltage and system specific versions to match electrical system and equipment requirements. The SurgePOD HEAVY DUTY delivers optimum surge protection using advanced patent pending SurgePOD™ module featuring thermal disconnect technology that eliminates the need for additional overcurrent protection. easyID™ LED Status Indicator Parallel connection to the electrical system permits the SurgePOD HEAVY DUTY SPD to be installed on any SPH50SP1120SN SPH50SP2480PN SPH50SP3208WYG ampacity panel. rd SPH50SP1240SN SPH50SP3240PNG SPH50SP3480WYG • Type 1 UL 1449 3 Edition Listed SPDs are easily SPH50SP1347SN SPH50SP3480PNG SPH50SP3600WYG selected and installed on the loadside or lineside of SPH50SP2120SNG SPH50SP3240DLG SPH50SP4208WYNG the service entrance overcurrent protective device • Patented SurgePOD module technology eliminates SPH50SP2240SNG SPH50SP3480DLG SPH50SP4480WYNG the need for additional fusing SPH50SP2347SNG SPH50SP4240HLG SPH50SP4600WYNG • Voltage specific models precisely match and protect SPH50SP2240PN SPH50SP4480HLG electrical systems and equipment up to 600Vac • Compact UV resistant NEMA 4X for indoor or outdoor NEMA 4X Rated Heavy Duty applications • easyID™ LED status indicator provides surge Type 1 UL Listed SPD protection status at a glance Type 1 SPD Part Number System Dimensions - in SPH 50S PX XXX XXX SPH = Product Series Surge Protection Heavy Duty Surge Rating 50S = 50kA max discharge current No of Wires/Poles P1 = 1 P2 = 2 P3 = 3 P4 = 4 Rated System Voltage 120, 208, 240, 347, 480, 600Vac System SN = Single-Phase 2 Wire, 2 Connection Points SNG = Single-Phase 2 Wire + G, 3 Connection Points PN = Split-Phase 3 Wire , 3 Connection Points PNG = Split-Phase 3 Wire + G, 4 Connection Points DLG = Three-Phase Delta 3 Wire + G, 4 Connection Points HLG = Three-Phase Highleg Delta 4 Wire + G, 5 Connection Points WYG = Three-Phase Wye 3 Wire, 4 Connection Points WYNG = Three-Phase Wye 3 Wire + G, 5 Connection Points For additional information, visit www.edisonfuse.com 173 Surge Protective Devices SurgePOD™ HEAVY DUTY Technical Information Nominal Max. Continuous System Operating AC Connection Catalog Number Voltage Voltage (MCOV) (V ) System Type Points C SPH50SP1120SN 120V 150V Single-Phase 2 Wire 2 SPH50SP1240SN 240V 320V Single-Phase 2 Wire 2 SPH50SP1347SN 347V 420V Single-Phase 2 Wire 2 SPH50SP2120SNG 120V 150V Single-Phase 2 Wire + G 3 SPH50SP2240SNG 240V 320V Single-Phase 2 Wire + G 3 SPH50SP2347SNG 347V 420V Single-Phase 2 Wire + G 3 SPH50SP2240PN 120/240V 150V Split-Phase 3 Wire 3 SPH50SP2480PN 240/480V 320V Split-Phase 3 Wire 3 SPH50SP3240PNG 120/240V 150V Split-Phase 3 Wire + G 4 SPH50SP3480PNG 240/480V 320V Split-Phase 3 Wire + G 4 SPH50SP3240DLG 240V 320V Three-Phase Delta 3 Wire + G 4 SPH50SP3480DLG 480V 550V Three-Phase Delta 3 Wire + G 4 SPH50SP4240HLG 120/240V 150/320V Three-Phase Highleg Delta 4 Wire + G 5 SPH50SP4480HLG 240/480V 320/550V Three-Phase Highleg Delta 4 Wire + G 5 SPH50SP3208WYG 208V 150V Three-Phase Wye 3 Wire + G 4 SPH50SP3480WYG 480V 320V Three-Phase Wye 3 Wire + G 4 † SPH50SP3600WYG 600V 420V Three-Phase Wye 3 Wire + G 4 SPH50SP4208WYNG 208Y/120V 150V Three-Phase Wye 4 Wire + G 5 SPH50SP4480WYNG 480Y/277V 320V Three-Phase Wye 4 Wire + G 5 † SPH50SP4600WYNG 600Y/347V 420V Three-Phase Wye 4 Wire + G 5 † 600V Wye versions are not CSA Certified. SurgePOD™ HEAVY DUTY Technical Information Specifications (for all SurgePOD HD units) Values Short Circuit Current Rating (SCCR) 200kA Nominal Discharge Current (8x20μs) I 20kA n Max. Discharge Current (8x20μs) I 50kA max Response Time t <25ns A Frequency 50/60Hz Operating State/Fault Indication Bi-Color LED - Green (good) / Red (replace) Conductor Length / Guage 18 inches, 10 AWG Stranded Tinned Copper Mounting Chase Nipple / Bracket* Enclosure / Flammability Ratings NEMA 4X - UL 94-5VA Degree of Protection (Installed State) IP20 (finger-safe) SPD Install Location Indoor/Outdoor Circuit Location Lineside or Loadside of service entrance overcurrent protective device rd Standard UL 1449 3 Edition Type 1 Listed SPD Agency Information cULus, CSA**, RoHS Compliant Product Warranty 5 Years*** Operating Temperature -40˚C to +85˚C Maximum Operating Altitude 16,000FT * Customer-supplied bracket. ** 600V Wye versions not CSA Certified. *** See SPD Limited Warranty Statement (3A1502) for details at www.cooperbussmann.com/Surge. For additional information, visit www.edisonfuse.com 174 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Surge Protective Devices Voltage Protection Ratings (VPRs) Rated System MCOV Voltage Protection Ratings (VPRs) Catalog Number Voltage (V ) (V ) L-N L-L L-G N-G o C SPH50SP1120SN 120V 150V 700 —— — SPH50SP1240SN 240V 320V 1200 —— — SPH50SP1347SN 347V 420V 1500 —— — SPH50SP2120SNG 120V 150V 700 — 1200 700 SPH50SP2240SNG 240V 320V 1200 — 2500 1200 SPH50SP2347SNG 347V 420V 1500 — 2500 1500 SPH50SP2240PN 120V/240V 150V 700 1200 —— SPH50SP2480PN 240V/480V 320V 1200 2500 —— SPH50SP3240PNG 120V/240V 150V 700 1200 1200 700 SPH50SP3480PNG 240V/480V 320V 1200 2500 2500 1200 SPH50SP3240DLG 240V 320V — 2500 1200 — SPH50SP3480DLG 480V 550V — 3000 1800 — SPH50SP4240HLG 120/240V 150V/320V 700/1200 1200/2500 1200/2500 700/1200 SPH50SP4480HLG 240/480V 320V/550V 1200/1800 2500/3000 2500/3000 1200/1800 SPH50SP3208WYG 208V 150V — 1200 700 — SPH50SP3480WYG 480V 320V — 2500 1200 — † SPH50SP3600WYG 600V 420V — 2500 1500 — SPH50SP4208WYNG 208Y/120V 150V 700 1200 1200 700 SPH50SP4480WYNG 480Y/277V 320V 1200 2500 2500 1200 † SPH50SP4600WYNG 600Y/347V 420V 1500 2500 2500 1500 † 600V Wye versions are not CSA Certified. easyID™ LED Status Indicator Mounting The easyID™ LED status indicator will illuminate when the unit is SurgePOD HEAVY DUTY is a panel mount device. It may also properly installed and the system or equipment being protected is be mounted using a customer supplied bracket or directly onto energized. The following LED color/status indicates: a female threaded conduit fitting. GREEN LED = Good The circuit is energized and protected. RED LED = Replace The circuit is energized and unprotected. The unit needs replacing. LED is Out / Unlit: •The circuit is most likely deenergized • The unit’s leads are disconnected • The unit is damaged Authorized personnel should follow all prescribed lockout/tagout and safety procedures in troubleshooting the cause for the above conditions. Opening SurgePOD HEAVY DUTY enclosure will void UL listing and warranty. For additional information, visit www.edisonfuse.com 175 For NEMA 4X installation, install appropriate customer supplied gasket between SurgePOD™ HEAVY DUTY SPD and enclosure wall. Tighten locknut to 20.3 Lb-In (2.3N•m) Wiring Connections Single-Phase L (Black) Black N (White) White SPH50SP1120SN, 120, 240, 347V (L-N) 2 Wire SPH50SP1240SN, Must be installed within 10 feet (3m) of a bonded SPH50SP1347SN neutral-ground connection per IEEE C62.41-1991 Two-Pole with Neutral L1 (Black) N (White) Black Black L2 (Black) White SPH50SP2240PN, 120V (L-N) / 240V (L1-L2), SPH50SP2480PN 240V (L-N) / 480V (L1-L2) Single Phase (Split) Center Tap For installations at or less than 10 feet (3m) from the transformer. L (Black) Black N (White) White GND (Green) Green SPH50SP2120SNG, 120, 240, 347V (L-N) SPH50SP2240SNG, 2 Wire + Ground For installation when located greater than 10 feet (3m) SPH50SP2347SNG of a bonded neutral-ground connection. Two-Pole with Neutral + Ground L1 (Black) N (White) Black Black L2 (Black) White Green GND (Green) SPH50SP3240PNG, 120V (L-N) / 240V (L1-L2), SPH50SP3480PNG 240V (L-N) / 480V (L1-L2) Single Phase (Split) Center Tap + Ground For installation when located greater than 10 feet (3m) of a bonded neutral-ground connection. Surge Protective Devices Wye + Ground L1 (Black) L2 (Black) Black Black Black Green L3 (Black) SPH50SP3208WYG, GND (Green) SPH50SP3480WYG, 208, 480, 600V (L-L) SPH50SP3600WYG 3 Wire Wye + Ground Wye with Neutral + Ground L1 (Black) L2 (Black) Black Black Black N (White) White Green L3 (Black) SPH50SP4208WYNG, GND (Green) SPH50SP4480WYNG, 120V (L-N) / 208V (L-L), SPH50SP4600WYNG 127V (L-N) / 220V (L-L), 277V (L-N) / 480V (L-L), 347V (L-N) / 600V (L-L) 4 Wire Wye + Ground Delta + Ground Single-Phase + Ground L1 (Black) Black Black L2 (Black) Black L3 (Black) GND (Green) Green 240, 480V (L-L) SPH50SP3240DLG, 3 Wire Delta + Ground SPH50SP3480DLG Highleg Delta L2 (Orange) Highleg Black Black L3 (Black) N (White) White L1 (Black) Green Orange GND (Green) SPH50SP4240HLG, SPH50SP4480HLG 120V (L1 / L3-N) / 240V (L-L), 240V (L1 / L3-N) / 480V (L-L) 4 Wire Highleg Delta + Ground For additional information, visit www.edisonfuse.com 176 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section 1-1/16” Dia. 1-11/16” 3-3/8” 1-11/16” 2-1/16” 2-1/16” 4-1/8” 3-3/16” 4-1/16” 7/8” Surge Protective Devices Description rd The SurgePOD™ PRO is a Type 1 UL Listed 1449 3 Edition surge protective device suitable for installation on both the loadside or lineside of the service entrance overcurrent protective device. Available in popular voltage and system specific versions to match common residential and light commercial electrical system and equipment requirements. The SurgePOD PRO delivers superior surge protection using MOV thermal easyID™ LED disconnect technology that eliminates the need for additional Status Indicator overcurrent protection. Parallel connection to the electrical system permits the SurgePOD PRO SPD to be installed on any ampacity panel. rd • Type 1 UL 1449 3 Edition Listed SPDs are easily selected and installed on the loadside or lineside of the service entrance overcurrent protective device SPP40SP1120SN SPP40SP3240DLG SPP40SP3208WYG • Voltage specific models precisely match and protect SPP40SP2240PN SPP40SP3480DLG SPP40SP3480WYG electrical systems and equipment better than “one-size-fits-all” SPDs • Thermal disconnect technology eliminates the need for additional fusing • Compact UV resistant NEMA 4X enclosure for indoor or NEMA 4X Rated Pro outdoor applications • easyID™ LED status indicator provides surge protection Type 1 UL Listed SPD status at a glance Type 1 SPD Part Number System Dimensions - in SPP 40S PX XXX XXX SPP = Product Series Surge Protection PRO Surge Rating 40S = 40kA max discharge current No of Wires/Poles P1 = 1 P2 = 2 P3 = 3 P4 = 4 Rated System Voltage 120, 208, 240, 480Vac System SN = Single-Phase 2 Wire, 2 Connection Points PN = Split-Phase, 3 Wire, 3 Connection Points DLG = Three-Phase Delta 3 Wire + G, 4 Connection Points WYG = Three-Phase Wye 3 Wire, 4 Connection Points For additional information, visit www.edisonfuse.com 177 Surge Protective Devices SurgePOD™ PRO Technical Information Nominal Max. Continuous System Operating AC Connection Catalog Number Voltage Voltage (MCOV) (V ) System Type Points C SPP40SP1120SN 120V 150V Single-Phase 2 Wire 2 SPP40SP2240PN 120/240V 150V Split Phase 3 Wire 3 SPP40SP3240DLG 240V 320V Three-Phase Delta 3 Wire + G 4 SPP40SP3480DLG 480V 550V Three-Phase Delta 3 Wire + G 4 SPP40SP3208WYG 208V 150V Three-Phase Wye 3 Wire + G 4 SPP40SP3480WYG 480V 320V Three-Phase Wye 3 Wire + G 4 Specifications (for all SurgePOD PRO units) Values Short Circuit Current Rating (SCCR) 200kA Nominal Discharge Current (8x20μs) I 10kA n Max. Discharge Current (8x20μs) I 40kA max Response Time (ns) t <25ns A Frequency 50/60Hz Operating State/Fault Indication Bi-Color LED - Green (good) / Red (replace) Conductor Length / Guage 18 inches, 10 AWG Stranded Tinned Copper Mounting Chase Nipple / Bracket* Enclosure / Flammability Ratings NEMA 4X - UL 94-5VA Degree of Protection (Installed State) IP20 (finger-safe) SPD Install Location Indoor/Outdoor Circuit Location Lineside or Loadside of service entrance overcurrent protective device rd Standard UL 1449 3 Edition Type 1 Listed SPD Agency Information cULus, RoHS Compliant Product Warranty 2 Years** Operating Temperature -40˚C to +65˚C Maximum Operating Altitude 12000FT * Customer-supplied bracket. ** See SPD Limited Warranty Statement (3A1502) for details at www.cooperbussmann.com/Surge. Voltage Protection Ratings (VPRs) Nominal System MCOV Voltage Protection Ratings (VPRs) Catalog Number Voltage (V ) L-N L-L L-G C SPP40SP1120SN 120V 150V 700 —— SPP40SP2240PN 120V/240V 150V 700 1200 — SPP40SP3240DLG 240V 320V — 2500 1200 SPP40SP3480DLG 480V 550V — 3000 1800 SPP40SP3208WYG 208V 150V — 1200 700 SPP40SP3480WYG 480V 320V — 2500 1200 For additional information, visit www.edisonfuse.com 178 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Two-Pole with Neutral L1 (Black) N (White) Black Black L2 (Black) White SPP40SP2240PN, 120V (L-N) / 240V (L1-L2), Single Phase (Split) Center Tap For installations at or less than 10 feet (3m) from the transformer. Surge Protective Devices easyID™ LED Status Indicator Wiring Connections The easyID™ LED status indicator will illuminate when the unit is Single-Phase properly installed and the system or equipment being protected is energized. The following LED color/status indicates: L (Black) GREEN LED = Good Black The circuit is energized and protected. N (White) White SPP40SP1120SN 120V (L-N) 2 Wire Must be installed within 10 feet (3m) of a bonded neutral-ground connection per IEEE C62.41-1991 RED LED = Replace The circuit is energized and unprotected. The unit needs replacing. LED is Out / Unlit: •The circuit is most likely deenergized • The unit’s leads are disconnected • The unit is damaged Authorized personnel should follow all prescribed lockout/tagout and safety procedures in troubleshooting the cause for the above conditions. Opening SurgePOD Wye + Ground PRO enclosure will void UL listing and warranty. L1 (Black) L2 (Black) Mounting Black Black Black SurgePOD PRO is a panel mount device. It may also be mounted using a customer supplied bracket or directly onto a Green female threaded conduit fitting. L3 (Black) SPP40SP3208WYG, GND (Green) SPP40SP3480WYG 208, 480V (L-L) 3 Wire Wye + Ground Delta + Ground L1 (Black) Black Black L2 (Black) Black L3 (Black) GND (Green) Green 240, 480V (L-L) SPP40SP3240DLG, 3 Wire Delta + Ground SPP40SP3480DLG For additional information, visit www.edisonfuse.com 179 For NEMA 4X installation, install appropriate customer supplied gasket between SurgePOD™ PRO SPD and enclosure wall. Tighten locknut to 20.3 Lb-In (2.3N•m) Elements of a Practical Fuse Specification Low Voltage (600V or Less) Fuse Specification: Fuse classes, types and ratings: General: The contractor shall install UL “Listed” fuses of the correct All fuses have been specified as to UL Class, type, volts UL Class, type and ampere ratings in switches or place in and amp rating on the plans when the project was spare fuses cabinet(s) as indicated on the plans and/or as engineered. No fuse types or ratings will be changed in the specified below. All installed and spare fuses shall be in field without approval from the project design engineer. their original new, clean, dry and unused condition when Generally, the fuse types commonly specified are Class L installed and when placed in a spare fuses cabinet(s). The time-delay type, Class RK1 dual element type and Class J contractor shall thoroughly clean, mechanically check and fast-acting type. Class L fast-acting, Class RK1 fast-acting electrically test, as required, all equipment and components and 300V Class T fast-acting fuses may be specified for before installing fuses and energizing. special conditions. Interchangeability of specified fuses: UL Class L bolt-on fuses rated 601 to The fuse brand specified is the quality benchmark and is 6000A: preferred. All installed and spare fuses shall be both To mount UL Class L fuse types and amps ratings as electrically and physically interchangeable with the same shown on the plans, use stainless steel bolts of correct specific Classes, types and ratings of any other brand of number, diameter and length, stainless steel spring washers fuses that are UL “Listed” per the appropriate UL Standard on each side of the bolt and stainless steel nuts. The nuts for safety without creating a safety hazard for the public shall be tightened to the torque recommended by ASTM and/or building occupants. Otherwise, a fuse-protected Standards for the bolt size used. The bolts shall have the power distribution system design can not meet the require- largest diameter that will fit the bolt holes and length to ments of good engineering practice, as applied during the allow full nut thread engagement. Bolts shall be installed in design of this project, and can not meet the requirements of ® each fuse mounting hole or slot. Class L fuses shall have the National Electrical Code during the life of the silver links. The quality benchmark for Class L fuses shall installation. The contractor shall place an instruction label be Edison Fusegear Catalog Symbol LCL time-delay type or inside the door of each switch (do not cover other Catalog Symbol LCU fast-acting type as shown on the instructions) identifying the UL Class, Type, Volts and Amp plans. Edison Class L fuses are quality engineered and rating oforiginally installed fuses. constructed, using Statistical Process Control, for foolproof filler retention without “O” rings, and do not expel gases. Spare fuses: A metal spare fuse cabinet(s) shall be provided as required, UL Class R fuses rated up to 600A: surface mounted, with lockable handle. 10% of each type UL Class RK1 dual element, time-delay fuse type and and rating of installed fuses shall be duplicated as spare ratings shall be installed in Class R switches as shown on fuses, or a minimum of 3 fuses of each type and rating, and the plans. Class RK1 dual element fuses shall not use placed in a Edison Catalog Symbol ESFC spare fuse springs in the overload elements in ratings 70A and larger; cabinet(s) and locked. they shall have non-ferrous end caps for energy efficiency. The quality benchmark for Class RK1 dual element fuses Engineering plans and specifications: shall be Edison Catalog Symbol LENRK(AMP)(250V) or LESRK(AMP) (600V). A copy of the pertinent sheets of the plans and the pages of specifications pertaining specifically to installed fuses information shall be placed inside one of the Edison Catalog UL Class J fuses rated up to 600A and Symbol spare fuse cabinets for maintenance reference 300V Class T fuses rated 35 to 800A: purposes. Protection of circuit breakers requires the use of Class J or Class T fuses as shown on the plans. These fuse Classes are not interchangeable with fuses having less current limiting ability. The quality benchmark for these fuses shall be Edison Catalog Symbol JFL (Class J fast acting type) or Catalog Symbol TJN (300V Class T fast acting type). For additional information, visit www.edisonfuse.com 180 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Fuse Terminology Ambient Temperature* Current Rating* The temperature of the air surrounding the fuse. The A-C or D-C ampere rating which the fuse is capable of carrying continuously under specified conditions. Arcing Time The amount of time that passes from the instant the fuse Delay element or link has melted until the overcurrent is interrupted or This refers to intentional “delay” designed into the overload cleared. range operation of a fuse and is meaningless except as defined by a fuse manufacturer. Other words used to indicate delay but Asymmetrical Current not UL defined may be “Time-Lag”, “Delay Type”, etc.. Refer to ALTERNATING CURRENT. A-C current is asymmetrical when the loops about a zero axis are unequal Dual Element Fuse (offset). This condition is usually associated with the first five or The words “Dual Element” and “Time-Delay” appear on the less cycles of fault current flow in a circuit that has inductive labels of Class R fuses to indicate that the fuse has UL defined reactance. All power distribution systems have a variable delay in the overload operation range of a minimum of 10 amount of inductive reactance. seconds at 500% of the fuse amperes rating. A “Dual Element” fuse has separate overload and short-circuit elements and is Body* considered a “true time-delay fuse” design as opposed to other The part of the fuse which encloses the fuse elements and types of construction to obtain delay. supports the contacts. Also referred to as cartridge, tube or case. Effective Current (I ) e “Effective” and “RMS” both refer to the heating effect value of Bolted Fault an A-C current equivalent to a steady flow of a D-C current. This refers to a zero impedance fault considered at locations in “Effective let-through amperes” (I ) refers to the heating effect e a power system where the maximum value of available fault value of the current allowed to flow during the clearing of a current is calculated. short-circuit current. Bridge Eutectic Alloy The specially designed narrow portion of a fuse link that heats This is an alloy of lead, tin and other metals that, by fastest under overcurrent conditions to open first. metallurgical definition, changes from a solid directly to a liquid when its melting point is reached. This alloy is used in Edison Cartridge Fuse* Class R fuses for dependable overload element operation. A fuse consisting of a current responsive element inside a fuse body with contacts on both ends. Fast-Acting Fuse This is a fuse with no intentional time-delay designed into the Cartridge Size* overload range. Sometimes referred to as a “single element The range of voltage and ampere ratings assigned to a fuse” or “non-delay fuse”. cartridge of specific dimensions and shape. Fault Current 2 Clearing I t (Ampere Squared Seconds)* Short-circuit current that flows partially or entirely outside the The measure of heat energy developed as a result of current intended normal load current path of a circuit or component. flow between the time that current begins to flow and until the Values may be from hundreds to many thousands of amperes. 2 fuse clears the circuit. “I ” stands for the square of the effective let-through current and “t” stands for the time of current flow in Ferrule 2 seconds. The term I t also applies during the melting or arcing The cylindrical brass, bronze or copper mounting terminals of portions of the clearing time and is referred to as melting or fuses with amps ratings up to 60 amperes. The cylindrical 2 2 2 arcing I t respectively. Clearing I t is the sum of melting I t and terminals at each end of a fuse fit into fuse clips. 2 arcing I t. Filler* Clearing Time A material used to fill a section or sections of a fuse which aids This is the total opening time of a fuse from the occurrence of in arc extinction. an overcurrent until the fuse stops current flow. This is the sum of link melting and arcing time. Fuse* A protective device which opens by the melting of a current Contacts* sensitive element during specified overcurrent conditions. The external metallic parts of the fuse used to complete the circuit. Also referred to as ferrules, caps, blades or terminals. Heat Sink A mass of metal, usually copper or a eutectic alloy, used in the Current Limitation overload element of Class R fuses to provide accurate time A fuse provides current limitation when the link melts under delay by absorbing heat from an overload current flow through short-circuit conditions to interrupt the current flow before the a fuse. peak of the first one-half cycle of prospective current and the current flow is stopped within one-half cycle. High Rupturing Capacity (HRC) HRC is used by Canadian and British Standards as an Current-Limiting Fuse* equivalent to the U.S. interrupting rating of a fuse. HRC must A fuse that meets the following three conditions: 1) interrupts all be at least 100,000 amperes. available overcurrents within its interrupting rating; 2) within its current-limiting range, limits the clearing time at rated voltage to *From ANSI/ NEMA FU1-86 an interval equal to, or less than, the first major or symmetrical current loop duration; and 3) limits peak let-through current to a value less than the available peak current. Current-Limiting Range* A range of available currents from the threshold current to the interrupting current rating of a fuse. For additional information, visit www.edisonfuse.com 181 Fuse Terminology 2 I t (Amperes Squared Seconds) Overload This is a value obtained by multiplying an effective current A value of overcurrent usually considered to be up to about 10 squared by the time of flow of the current in seconds. It is not a times the ampere rating of an overcurrent protection device or heat energy value, but represents heat energy for comparison circuit ampere rating. purposes. Some common uses are to determine fuse selectivity and to select current limiting fuses that will limit this value to be Peak Arc Voltage* compatible with the withstandability of semi-conductors that The maximum peak voltage across the fuse during the arcing 2 have an I t rating. time. Interrupting Rating* Peak Let-Through Current (I )* p A rating based upon the highest rms alternating current or The maximum instantaneous current through a fuse during direct current which the fuse is required to interrupt under interruption in its current-limiting range. specific conditions. Rating* Knife Blade A designated limit of operating characteristics based on definite A flat copper mounting blade (terminal) at each end of fuses conditions. rated 70 through 6000 amperes. Knife blades may be mounted in fuse clips or bolted in place via blade holes, depending on Rejection Feature* the fuse type. The physical characteristic of a fuse and fuseholder (slot, groove pin or overall dimension) which prevents substitution by Limiter other classes of fuses. Limiters have internal construction like fuses but provide only short-circuit protection and no overload protection. They are Renewable Fuse* intended for special applications such as Cable Limiters and A fuse which can be readily restored for service after operation Welder Limiters. by the replacement of the renewal elements. Link Renewal Element (Renewal Link)* The fusible portion of the fuse which melts, or reacts by other That part of a renewable fuse that is replaced after each means, to clear the circuit during an overcurrent condition. Also interruption to restore the fuse to operating condition. referred to as an element. Short-Circuit Current Magnetic Stress Refer to Fault Current. When thousands of amps of short-circuit current flows through equipment and conductors, strong magnetic fields are Single-Element Fuse developed that may cause serious damage unless adequate Refer to Fast-Acting Fuse. physical bracing is applied. Force is proportional to the value of peak current squared. This force is usually reduced by current Supplemental Fuse (UL) limiting fuses as compared to other overcurrent protective A UL fuse class per Standard 198G that defines certain small devices. fuses not intended for branch circuit protection. Maximum Energy* Thermal Stress A condition under which, in a specified time, the maximum Heat builds up in equipment and conductors during the time of amount of heat possible is generated in the fuse before overcurrent flow that may cause thermal stress and potential clearing. thermal (heat) damage if overcurrent protection devices do not operate fast enough. Melting Time* The time from the initiation of an overcurrent to the instant Threshold Current* arcing begins inside a fuse. The minimum rms symmetrical available current of the current- limiting range, where melting of the fuse element occurs at Nonrenewable Fuse* approximately 90 degrees on the symmetrical current wave, A fuse which cannot be restored for service after operation. and total clearing time is less than one-half cycle. Normal Frequency Recovery Voltage* Threshold Ratio* The normal frequency rms voltage impressed upon the fuse The threshold current divided by the fuse current rating. after the circuit has been interrupted and after high frequency transients have subsided. Time-Delay Fuse* A fuse capable of carrying a specific overcurrent for a minimum One-Line Diagram time. An electrical diagram that shows one line to represent two or more conductors for simplification. Total Clearing Time* Refer to Clearing Time. One-Time Fuse A term used to identify a non-renewable Class H fuse as Voltage Rating* opposed to a Class H fuse with replaceable Iinks. See The maximum rms ac voltage or the maximum dc voltage at “non-renewable fuse”. which the fuse is designed to operate. Overcurrent* *From ANSI/NEMA FU1-86 Any current in excess of the fuse current rating. For additional information, visit www.edisonfuse.com 182 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Cross Reference CROSS REFERENCE GUIDE BRUSH/ GEC/ VOLT EDISON DORMAN CEFCO MERSEN LITTELFSE. FUSETEK SIEMENS NORAM AEROFLEX UL CLASS CURRENT LIMITING FUSES (CSA CLASS) RK1 Fast Acting 250 NCLR NCLR C-HG A2KR, HNR KLNR RHN —— HB (HRCI-R) 600 SCLR SCLR C-HR A6KR, HSR KLSR RHS —— HA RK1 Time Delay 250 LENRK LENRK LON-RK A2D-R LLNRK —— 2R-D — (HRCI-R) 600 LESRK LESRK LOS-RK A6D-R LLSRK —— 6R-D — RK5 Time Delay 250 ECNR ECNR CRNR TRNR, TR FLN-R RDN —— — (HRCI-R) 600 ECSR ECSR NRSR TRSR,TRS FLS-R IDSR RDS —— — L Fast Acting 600 LCU LCU CL, CLU A4BQ — LFA — 6L-F L8, L12 (HRCI-L) Time Delay 600 LCL LCL CLL A4BY,A4BT KLPC, KLLU—— 6L-D L16, L20 J Fast Acting 600 JFL JCL, CJ C-J A4J, CJ JLS JFC 3NW2-71- 6J-F JA (HRCI-J) Time Delay 600 JDL —— AJT JTD —— J-D — T Fast Acting 300 TJN TJN — A3T JLLN —— — — (HRCI-T) 600 TJS TJS — A6T JLLS —— — — G Time Delay 480 SEC —— AG5 SLC —— — — CC Time Delay 600 EDCC —— ATDR CCMR —— 6M-S — (HRCI-CC) Time Delay 600 HCTR —— ATQR KLDR —— 6CC-S — Fast Acting 600 HCLR HCLR CTK-R ATMR KLKR FLKR — 6CC-F — UL CLASS GENERAL PURPOSE FUSES H Fast Acting 250 KON KON 50KOTN OTN NLN OFN —— — and K5 600 KOS KOS 50KOTS OTS NLS OFS —— — H Time Lag 250 ERN ERN — RFN RLN —— — — Renewable 600 ERS ERS — RFS RLS —— — — H Fuse Links 250 ELNE ELN — RLN LKN —— — — Renewable (1-60A) 600 ELS ELS — RLS LKS —— — — 600 MCL MCL CTK ATM KLK FLK — 6M-S — Midget Fast Acting 600 EBS EBS — SBS BLS —— 6N-F — 250 MOL MOL — OTM BLF FLF —— — 500 MEQ MEQ — ATQ FLQ —— — — Midget Time Delay 250 MEN MEN — TRM FLM FRM —— — 125/250 MID MID — GFN FLA —— — — CANADIAN FUSES Code/ One Time 250 KON/PONC KON/PON 50KOTN NRN OTN NLN OFN —— — Standard 600 KOS KOS 50KOTS NRS OTS NLS OFS —— — 10K AIR Time Delay 250 CDNC CDN — CRN FLN ODN —— — 600 CDSC CDS — CRS FLS ODS —— — TYPE K Offset CIH07 CIH07 C-K ESK —— — — — Class C Blade 600 CIK07 CIK07 C-K ESK —— — — — CIL14 CIL14 C-K ESK —— — — — HRCI-CA Fast Acting 600 CIF21 CIF21 C-N MS —— 3NWOMFS2 6CA-F — HRCI-CB Fast Acting 600 CIF06 CIF06/NK CNS GNS — NIC 3NWOMFS1 6CB-F — EK EK CES —— — — — — HRC-II FUSES Offset H07C H07C, AAO CIA FES,GIA — 2CO 3NW2-11 6C-F 932 Blade 600 K07C K07C, BAO CIS FES, GIS — 2CO 3NW2-12 6C-F 933 HRC-II-C L14C L14C, CEO CCP FES, GCP — 2CO 3NW2-13 6C-F 944 Center M09C M09C, DD CF FESC, GF — 2CC 3NW2-23 6C-F 965 Blade 600 P11C P11C, EF CM FESC, GM — 2CC 3NW2-31 6C-F 976 R11C R11C, FF CLM FESC, GLM — 2CC 3NW2-34 6C-R 977 Offset K07CR K07CR, OSD —— — — — — — HRC-II Center 600 L09C L09C, CD CC FESC, GC — 2CM 3NW2-22 — 964 MISC Offset M14C M14C, DEO CFP FES, GFP — 2CM 3NW2-14 — 945 Center P09C P09C, ED CMF FESF, GMF — 2CM 3NW2-25 — 966 Miniature Offset 600 CIF21 F21, NITD NIT GIT — N2B —— — Blade CIF06 F06,NSD,NSC NS NSG — N2C —— — SMALL DIMENSION FUSES EDISON GEC/ Size Description new old BRUSH CEFCO MERSEN LITTELFSE. FUSETEK NORAM Time Delay, Glass GDC BDC BDC CMB GDG 218 SD6 SE-S Fast Acting, Glass GMA BMA BMA CMA GGM 235 MQ4 SE-F 5 x 20mm Fast Acting, Glass GDB BDB BDB — GSB 217 —— Fast Acting, Glass GDA —— — — 216 —— Time Delay, Glass GMC —— — GSC —— — Time Delay, Glass GMD —— — GSC 239 —— 1/4 x 1" Fast Acting, Glass AGX BGX BGX 8AG GGX 361/2 SL4 — Fast Acting, Glass AGC BGC BGC 3AG GGC 312 SS2/SS6 SU-F Fast Acting, Cer. ABC BBC BBC 3AB GAB 314 CES14 — 1/4 x 1-1/4" V Fast Acting, Cer. GBB —— — — 322 —— Time Delay, Glass MDL BDL BDL 3AG-SB GDL 313 SD4 SU-S Time Delay, Cer. MDA BDA —— GSA 326 —— For additional information, visit www.edisonfuse.com 183 Cross Reference CROSS REFERENCE GUIDE KV DIMENSIONS EDISON GEC MERSEN B & S CGE GE WESTINGHOUSE WESTINGHOUSE POTENTIAL TRANSFORMER FUSES (FERRULE MOUNTING) 3.6 5.6" 1" 3.6ABWNA —— OMBNN —— — — 5.5 5.6" 1" 5.5ABWNA — A500T OMBNN —— — — 5.5 5.6" 13/16" 5.5AMWNA — A480T——— — 7.2 5.6"1" 7.2ABWNA VTF6.6 — OMBNN —— — — 7.2 7.69"1" 7.2ABCNA VTF11 — OMDNN —— — — 12.0 7.69"1" 12ABCNA VTF11 — OMDNN —— — — 15.5 10.00"1" 15.5ABFNA VTF15 — OMFNN —— — — 17.5 14.13"1" 17.5ABGNA —— OMGNN —— — — 24.0 14.13"1 24ABGNA —— OMGNN —— — — " 5.5CAVH0.5E —— FC464-0.5E 328L497-G7 —— — 5.5 7.375" 1.63" 5.5CAVH1E —— FC464-1E 328L497-G8 —— — 5.5CAVH2E —— FC464-2E 328L497-G9 —— — 15.5CAVH0.5E —— FC467-0.5E 328L497-G19 9F60BHH905 758C433A21 677C452G03 15.5CAVH1E —— FC467-1E 328L497-G20 9F60BHH001 758C433A26 677C452G08 15.5 12.87" 1.63" 15.5CAVH2E —— FC467-2E 328L497-G21 —— — 15.5CAVH3E —— FC467-3E 328L497-G22 —— 38.0 17.32" 1.63" 38CAVH0.5E —— SCA22-.0.5E —— 758C433A22 677452G04 38CAVH1E —— SCA22-.1E —— 758C433A24 677452G09 EDISON EDISON/BRUSH MERSEN CGE CGE KV BODIES new old new MERSEN WESTINGHOUSE new old MEDIUM VOLTAGE DISTRIBUTION FUSES (N.A. DIMENSIONS) 1 MV055F1DAX30E 5.5FFNHA 30E A055F1DORO-30E A550X30E-1 151D978 G01 9F60FJD 030 6193406 G11 1 MV055F1DAX40E 5.5FFNHA 40E A055F1DORO-40E A550X40E-1—— 6193406 G12 1 MV055F1DAX50E 5.5FFNHA 50E A055F1DORO-50E A550X50E-1 151D978 G02 9F60FJD 050 6193406 G13 1 MV055F1DAX65E 5.5FFNHA 65E A055F1DORO-65E A550X65E-1 151D978 G03 9F60FJD 065 6193406 G14 1 MV055F1DAX80E 5.5FFNHA 80E A055F1DORO-80E A550X80E-1 151D978 G04 9F60FJD 080 6193406 G15 5.5 1 MV055F1DAX100E 5.5FFNHA 100 A055F1DORO-100E A550X100E-1 151D978 G05 9F60FJD 100 6193406 G16 1 MV055F1DAX150E 5.5FFNHA 150 A055F1DORO-150E A550X150E-1 151D978 G07 9F60HJD 150 6193406 G18 1 MV055F1DAX200E 5.5FFNHA 200 A055F1DORO-200E — 151D978 G08 9F60HJD 200 6193406 G19 2 MV055F2DAX250E 5.5FFNHK 250 A055F2DORO-250E A550X250E-1 151D978 G11 9F60GJC 250 178L611 G12 2 MV055F2DAX300E 5.5FFNHK 300 A055F2DORO-300E A550X300E-1 151D978 G12 9F60GJC 300 178L611 G14 2 MV055F2DAX400E 5.5FFNHK 400 A055F2DORO-400E A550X400E-1 151D978 G13 9F60GJC 400 178L611 G18 1 JDZ-20E 8.25FFNHA 20E — A825X20E-1 — 9060FJE 020 6193481 G9 1 JDZ-25E 8.25FFNHA 25E — A825X25E-1 — 9060FJE 025 6193481 G10 1 JDZ-30E 8.25FFNHA 30E — A825X30E-1 677C573 G01 9060FJE 030 6193481 G11 1 JDZ-40E 8.25FFNHA 40E — A825X40E-1 677C573 G02 9060FJE 040 6193481 G12 1 JDZ-50E 8.25FFNHA 50E — A825X50E-1 677C573 G03 9060FJE 050 6193481 G13 8.25 1 JDZ-65E 8.25FFNHA 65E — A825X65E-1 677C573 G04 9060FJE 065 6193481 G14 1 JDZ-80E 8.25FFNHA 80E — A825X80E-1 677C573 G05 9060FJE 080 6193481 G15 2 JDZ-100E 8.25FFNHK 100E—— — — — 2 JDZ-150E 8.25FFNHK 150E — A825X150E-1 — 9060HJE 150 6193481 G18 2 JDZ-200E 8.25FFNHK 200E — A825X200E-1 — 9060HJE 200 6193481 G19 1 MV155F1DBX15E 15.5FFVHA 15E A155F1DORO-15E A1550X15E-1 — 9060FMH 015 6193496 G8 1 MV155F1DBX20E 15.5FFVHA 20E A155F1DORO-20E A1550X20E-1 — 9060FMH 020 6193496 G9 1 MV155F1DBX25E 15.5FFVHA 25E A155F1DORO-25E A1550X25E-1 — 9060FMH 025 6193496 G10 1 MV155F1DBX30E 15.5FFVHA 30E A155F1DORO-30E A1550X30E-1 — 9060FMH 030 6193496 G11 15.5 1 MV155F1DBX40E 15.5FFVHA 40E A155F1DORO-40E A1550X40E-1 — 9060FMH 040 6193496 G12 1 MV155F1DBX50E 15.5FFVHA 50E A155F1DORO-50E A1550X50E-1 — 9060FMH 050 6193496 G13 1 MV155F1DBX65E 15.5FFVHA 65E A155F1DORO-65E—— —— 2 MV155F2DBX100E 15.5FFVHK 100E A155F1DORO-100E A1550X100E-1 — 9060FMH 100 6193496 G16 2 MV155F2DBX150E 15.5FFVHK 150E A155F1DORO-150E—— —— AMPS MOUNTING EDISON OLD BRUSH GEC FUSETEK FUSEHOLDERS (600V) Front CM20CF CIF15F CIF15A CRS15H MF20F 30 Front/2 Pole 2xCM20CF —— C2RS15H — Back CM20CF + 2 of 30BS CF15BS CIF15B —— Front/Back CM20CF +1 of 30BS CIF15FBS CIF15C —— Front CM630CF C30AF CCH30A C30H or CFR30H MF30F 30 Back CM30CF + 2 of 20BS C30ABS CCH30B C30P MF30B Front/Back CM30CF + 1 of 20BS C30AFBS CCH30C C30PH MF30FB Front CM60CF C60BF CCK60A C60H or CRS60H MF60F 60 Back CM60CF + 2 of 60/100BS C60BBS CCK60B C60P MF60B Front/Back CM60CF + 1 of 60/100BS C60BFBS CCK60C C60PH MF60FB Front CM100CF C100CF CCL100A C100H or CRS100H MF100F 100* Back CM100CF + 2 of 60/100BS C100BS CCL100B C100P MF100B Front/Back CM100CF + 1 of 60/100BS C100FBS CCL100C C100PH MF100FB Front C30F C30F — CSC30H MD30F 30 Back C30BS C30BS — CSC30P MD30B Front/Back C30FBS C30FBS —— MD30FB Front C60F C60F — CSC60H — 60 Back C60BS C60BS —— — Front/Back C60FBS C60FBS —— — NOTE: This Cross Reference is a general guide based on dimensions and fuse type. Fuse characteristics can vary between manufacturers and should be evaluated for critical applications. *Edison uses compact fuse. 184 For additional information, visit www.edisonfuse.com Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Cross Reference CROSS REFERENCE GUIDE NEW OLD OLD RELIANCE/ FUSE VOLT EDISON EDISON BRUSH BRUSH GEC/CEFCO GOULD IR FERRAZ FUSETEK LITTELFUSE SEMICONDUCTOR FUSES 130/150 FWA E13S, E15SF, E15S XL-SF13X RFA CSF-15X A13X SF13X A013FA RF13X L15S, KLW, KLA 250 FWX E25S, E25SF XL25X RFN CSF25X A25X SF25X AO25FA RF25X L25S, KLB USA 500 FWH E50S, E50SF XL50F RFV CSF50P A50P SF50P AO50FA RF50X L50S, KLH Dimensions 600 KBC E60S, E60SF XL60X RFS CSF60X A60X SF60X AO60FA RF60X L60S 600 KAC E60C XL60C RFC — A60X-4K SF60C — —— 700 FWP E70S, E70SF XL70F RFL CSF70P A70P SF70P AO70FA RF70P L70S 1000 FWJ E100S, E100SF XL100P RFK CSF100P A100P SF100P AO70FB RF100P — LCT — LCT — GSA — A350 — URE — 240 LET — LET — GSA & GSD — L350 — URGS — LMT — LMT — GSA & GSD — T350 — URGGT — European LMMT — LMMT — GSA & GSD — TT350 — URGHT — Dimensions FC — CT, FC — GSB — B1000 — 6.6URE — FE — ET, FE — GSB — E100 — 6.6URS — 660 FEE, EET — EET, FEE — GSGB — EE1000 — 6.6URT — FM — MT, FM — GSB, GSGB — M1000 — 6.6URGLT — FMM — MMT, FMM — GSB, GSGB — MM1000 — 6.6URGMT — Trip 500 TI500 — TI500 — GS700 — I700 —— — Indicators 700 TI700 — TI700 — CSL1000 — I1000 —— — WESTING- WESTING- KV BODIES EDISON BRUSH GOULD GE CGE HOUSE HOUSE GEC/CEFCO NELSON CHAMBERS FUSETEK MEDIUM VOLTAGE “R” RATED MOTOR CIRCUIT FUSES 1 5.5VFNHA2R 5.5VFNHA2R A480-2R 9F60LJD802 328L493G14 151D241G02 208D512G02 5.5KDAX2R 70-2M-1C-5.5 48-FM-2X-4 MRP1.2R 1 5.5VFNHA3R 5.5VFNHA3R A480-3R 9F60LJD803 328L493G16 151D241G03 208D512G03 5.5KDAX3R 100-3M-1C-5.5 48-FM-3X-4 MRP1.3R 1 5.5VFNHA4R 5.5VFNHA4R A480-4R 9F60LJD804 328L493G17 151D241G04 208D512G04 5.5KDAX4R 130-4M-1C-5.5 48-FM-4X-4 MRP1.4R 4.8/ 1 5.5VFNHA6R 5.5VFNHA6R A480-6R 9F60LJD806 328L493G19 151D241G06 208D512G06 5.5KDAX6R 170-6M-1C-5.5 48-FM-6X-4 MRP1.6R 5.5 1 5.5VFNHA9R 5.5VFNHA9R A480-9R 9F60LJD809 328L493G21 151D961G01 208D522G01 5.5KDAX9R 200-9M-1C-5.5 48-FM-9X-4 MRP1.9R 1 5.5VFNHA12R 5.5VFNHA12R A480-12R 9F60LJD812 328L493G23 151D961G02 208D522G02 5.5KDAX12R 230-12M-1C-5.5 48-FM-12X-4 MRP1.12R 2 5.5VFNHK18R 5.5VFNHK18R A480-18R 9F60MJD818 328L493G25 151D961G03 208D522G02 5.5KDBX18R 390-18M-2C-5.5 48-FM-18X-5 MRP1.18R 2 5.5VFNHK24R 5.5VFNHK24R A480-24R 9F60MJD824 328L493G27 151D961G04 208D522G03 5.5KDBX24R 450-24M-2C-5.5 48-FM-24X-5 MRP1.24R 1 2.75VFRHA2R 2.75VFRHA2R A240-2R 9F60LCB802 328L492G14 591C812G02 208D480G02 — 70-2M-1C-2.75 24-FM-2X-4 FC6005.2R 1 2.75VFRHA3R 2.75VFRHA3R A240-3R 9F60LCB803 328L492G16 591C812G03 208D480G03 — 100-3M-1C-2.75 24-FM-3X-4 FC6005.3R 1 2.75VFRHA4R 2.75VFRHA4R A240-4R 9F60LCB804 328L492G17 591C812G04 208D480G04 — 130-4M-1C-2.75 24-FM-4X-4 FC6005.4R 2.4/ 1 2.75VFRHA6R 2.75VFRHA6R A240-6R 9F60LCB806 328L492G19 591C812G06 208D480G06 — 170-6M-1C-2.75 24-FM-6X-4 FC6005.6R 2.75 1 2.75VFRHA9R 2.75VFRHA9R A240-9R 9F60LCB809 328L492G21 591C812G07 208D480G07 — 200-9M-1C-2.75 24-FM-9X-4 FC6005.9R 1 2.75VFRHA12R 2.75VFRHA12R A240-12R 9F60LCB812 328L492G23 591C812G08 208D480G08 — 230-12M-1C-2.75 24-FM-12X-4 FC6005.12R 2 2.75VFRHK18R 2.75VFRHK18R A240-18R 9F60MCB818 328L492G25 591C812G01 208D480G09 — 390-18M-2C-2.75 24-FM-18X-5 FC6005.18R 2 2.75VFRHK24R 2.75VFRHK24R A240-24R 9F60MCB824 328L492G27 591C812G02 208D480G10 — 450-24M-2C-2.75 24-FM-24X-5 — BODY KV LENGTH AMPS EDISON GEC B & S DELLE H.V. DIN DISTRIBUTION FUSES 6-40 3.6ADLSJ — SOLDD — 3.6 292mm 50-125 3.6WDLSJ — SOLDD — 160-200 3.6WFLSJ — SRLDD — 250-400 3.6WKLSJ — SRLDD — 6-63 7.2TDLSJ DSSAX SRLDD FD3 7.2 292mm 80-100 7.2TFLSJ DSSAX SRLDD FD3 125-160 7.2TFLSJ DSSBX SRLDD — 442mm 200-355 7.2WKMSJ DSLBX SRMDD — 6-50 12TDLEJ DESAGX — FD4 12 292mm 50-80 12THLEJ DESAX — FD4 100 12THLEJ DESBX —— 125 12THLEJ —— — 292mm 6-40 17.5TDLSJ — SOLDD — 50 17.5TFLSJ — SFLDD — 17.5 6-40 17.5TDMEJ DFLAX SOMDD FD5 442mm 40-63 17.5TDMEJ DFLAX SRMDD FD5 80 17.5THMEJ DFLBX SRMDD — 6-31 24TDMEJ DTLAX — FD6 25 442mm 40-50 24TDMEJ DTLAX — FD6 63-71 24THMEJ DTLBX — FD6 36 537mm 3-25 36TDQSJ DHMBX — FD7 31-50 36TFQSJ BHMBX — FD7 For additional information, visit www.edisonfuse.com 185 Notes For additional information, visit www.edisonfuse.com 186 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Notes For additional information, visit www.edisonfuse.com 187 Notes For additional information, visit www.edisonfuse.com 188 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Special Canadian Medium Fuse Blocks, UL/CSA Fuses UL/CSA Fuses Surge Protective Application Purpose Fuses Fuses & Holders Voltage Fuses Holders & Misc. Current Limiting General Purpose Devices Section Notes For additional information, visit www.edisonfuse.com 189 Quick Cross Reference Quick Cross Reference Guide Competitor Competitor Edison Edison Fuse Family Fuse Family 10KOTN(AMP) BLS(AMP) EBS(AMP) KON(AMP) 10KOTS(AMP) CBS(AMP) EBS(AMP) KOS(AMP) 216(AMP) CCK(AMP) ACK(AMP) GDA(AMP) 217(AMP) CCL(AMP) ACL(AMP) GDB(AMP) 218(AMP) CCMR(1/2-30A) EDCC(AMP) GDC(AMP) 235(AMP) CJ(AMP) JFL(AMP) GMA(AMP) 239(AMP) CJS(AMP) JFL(AMP) GMD(AMP) 25SH(AMP) CLU(AMP) LCU(AMP) SF25H(AMP) 307(AMP) CMF(AMP) MOL(AMP) SFE(AMP) 311(12-30) CNL(AMP) ANL(AMP) AGC(12-30) 312(1/10-10) CNM(AMP) MEN(AMP) AGC(.1-10) 313(AMP) CNN(AMP) ANN(AMP) MDL(AMP) 314(AMP) CNQ(AMP) MEQ(AMP) ABC(AMP) 326(AMP) CRN-R(AMP) ECNR(AMP) MDA(AMP) 342012 CRS-R(AMP) ECSR(AMP) HKP 361(AMP) CSU SSU AGX(AMP) 362(AMP) CSY SSY AGC(AMP) 3740(15-30) CTK(AMP) MCL(AMP) TL(15-30) 3765(15-30) CTK-R(AMP) HCLR(AMP) TL(15-30) 3770(15-30) CTN-R(AMP) NCLR(AMP) SL(15-30) 3780(.25-30) CTS-R(AMP) SCLR(AMP) S(1/4-30) 3785(.3-30) ECK(AMP) ACK(AMP) T(3/10-30) 3AB(AMP) ECL(AMP) ACL(AMP) ABC(AMP) 3AB-SB(AMP) EGX(AMP) AGX(AMP) MDA(AMP) 3AG(AMP) ENL(AMP) ANL(AMP) AGC(AMP) 3AG-SB(AMP) ENN(AMP) ANN(AMP) MDL(AMP) 50KOTN(1-60) EON(AMP) KON(AMP) KON(1-60) 50KOTS(15-60) EOS(AMP) KOS(AMP) KOS(15-60) 8AG(AMP) ESA SA(AMP) AGX(AMP) A2D(AMP) ESOU SOU LENRK(AMP) A2D(AMP)R ESRU SRU LENRK(AMP) A2K(AMP)R ESSU SSU NCLR(AMP) A3T(AMP) FLA(AMP) MID(AMP) TJN(AMP) A4BY(AMP) FLM(AMP) MEN(AMP) LCL(AMP) A4J(AMP) FLNR(AMP) ECNR(AMP) JFL(AMP) A6D(AMP) FLQ(AMP) MEQ(AMP) LESRK(AMP) A6D(AMP)R FLSR(AMP) ECSR(AMP) LESRK(AMP) A6K(AMP) FNA(AMP) MID(AMP) SCLR(AMP) A6K(AMP)R FNM(AMP) MEN(AMP) SCLR(AMP) A6T(AMP) FNQ(AMP) MEQ(AMP) TJS(AMP) AG5(AMP) FNQ-R(AMP) HCTR(AMP) SEC(AMP) AJT(AMP) FNW(AMP) MEN(AMP) JDL(AMP) AOK(AMP) FRN(AMP) ECNR(AMP) ALS(AMP) ATDR(AMP) FRN-R(AMP) ECNR(AMP) EDCC(AMP) ATM(AMP) Gould FRS(AMP) ECSR(AMP) MCL(AMP) ATM(AMP) BUSS FRS-R(AMP) ECSR(AMP) ATM(AMP) ATMR(AMP) GAB(AMP) ABC(AMP) HCLR(AMP) ATO(AMP) GDL(AMP) MDL(AMP) ATC(AMP) ATQ(AMP) GFN(AMP) MID(AMP) MEQ(AMP) ATQR(AMP) GGC(AMP) AGC(AMP) HCTR(AMP) BAF(AMP) GGM(AMP) GMA(AMP) MOL(AMP) BAN(AMP) GGX(AMP) AGX(AMP) MOL(AMP) BBC(AMP) GSB(AMP) GDB(AMP) ABC(AMP) BBS(AMP) GSC(AMP) GMC(AMP) EBS(AMP) BGC(AMP) GSFC SFC-FUSE-CAB AGC(AMP) BGX(AMP) GSL(15-30) SL(15-30) AGX(AMP) BLF(AMP) GT(AMP) T(AMP) MOL(AMP) BLN(AMP) GTL(15-30) TL(15-30) MOL(AMP) For additional information, visit www.edisonfuse.com 190 Canadian Application Surge Protective Fuse Blocks, Medium Special UL/CSA Fuses UL/CSA Fuses Fuses & Holders Section Devices Holders & Misc. Voltage Fuses Purpose Fuses General Purpose Current Limiting Quick Cross Reference (Continued) Competitor Competitor Edison Edison Fuse Family Fuse Family ECSR(AMP) GW(15-30) LOS-R(AMP) TL(15-30) LESRK(AMP) JCE(1/2-4)E LOS-RK(AMP) 5.5AMWNA(0.5-4.0)E EDCC(AMP) JCK(2-6)R LP-CC(AMP) 2.75VFRHA(2-6)R JDL(AMP) JCK(9-12)R LPJ(AMP) 2.75VKRHA(9-12)R LENRK(AMP) JCK(18-24)R LPN(AMP) 2.75VKRHK(18-24)R LENRK(AMP) JCL(2-6)R LPN-RK(AMP) 5.5VFHNA(2-6)R LESRK(AMP) JCL(9-12)R LPS(AMP) 5.5VKNHA(9-12)R LESRK(AMP) JCL(18-24)R LPS-RK(AMP) 5.5VKNHK(18-24)R MDL(AMP) JCL(AMP) MDX(AMP) JFL(AMP) MDA(AMP) JCT(0.5-1)E MSL(AMP) 15.5CAVH(0.5-1)E) AGC(AMP) JCW(1/2-4)E MTH(AMP) 5.5CAVH(0.5-4.0)E KON(AMP) JHC(AMP) NLN(AMP) JDL(AMP) KOS(AMP) JJN(AMP) NLS(AMP) TJN(AMP) KON(AMP) JJS(AMP) NON(AMP) TJS(AMP) KOS(AMP) JKS(AMP) NOS(AMP) JFL(AMP) KON(AMP) JLLN(AMP) OT(AMP) TJN(AMP) MOL(AMP) JLLS(AMP) OTM(AMP) TJS(AMP) KOS(AMP) JLS(AMP) OTS(AMP) JFL(AMP) ERN(AMP) JTD(AMP) REN(AMP) JDL(AMP) ERS(AMP) KLDR(AMP) RES(AMP) HCTR(AMP) ERN(AMP) KLK(AMP) RF(AMP) MCL(AMP) ERS(AMP) KLKR(AMP) RFS(AMP)(GOULD) HCLR(AMP) ERN(AMP) KLLU(AMP) RLN(AMP)(LF) LCL(AMP) ELS(AMP) KLMR(AMP) RLS(AMP)(GOULD) EDCC(AMP) SA(AMP) KLNR(AMP) SAO(AMP) NCLR(AMP) SA(AMP) KLPC(AMP) SAO(AMP) LCL(AMP) SEC(AMP) KLSR(AMP) SC(AMP) SCLR(AMP) SEC(AMP) KLU(AMP) SLC(AMP) LCL(AMP) SL(15-30) KRP-C(AMP)SP SLO(15-30) LCL(AMP) GLR(AMP) KTK(AMP) SLR MCL(AMP) S(AMP) KTK-R(AMP) SOO(AMP) HCLR(AMP) TL(15-30) KTN(AMP) TLO(15-30) NCLR(AMP) T(15-30) KTN-R(AMP) TOO(15-30) NCLR(AMP) ECNR(AMP) KTS(AMP) TR(AMP) SCLR(AMP) ECNR(AMP) KTS-R(AMP) TR(AMP)R SCLR(AMP) MEN(AMP) KTU(AMP) TRM(AMP) LCU(AMP) ECSR(AMP) LGR(AMP) TRS(AMP) GLR(AMP) ECSR(AMP) LHR000 TRS(AMP)R HLR UCLA LLNRK(AMP) UHA LENRK(AMP) UCLC LLSRK(AMP) UHC LESRK(AMP) W (1/2-12) LON-R(AMP) WOO(1/2-12) ECNR(AMP) TL(15-30) LON-RK(AMP) WOO(15-30) LENRK(AMP) For additional information, visit www.edisonfuse.com Customer Assistance C3 – the Enhanced, Online Cooper Customer Center Customer Satisfaction Team - US and Canada Provides real time product availability, net pricing, order Available to answer questions regarding Edison products status & shipment tracking for Edison distributors. Available at: Monday-Friday, 8:00 a.m. – 4:30 p.m. Central Time. Contact: • www.cooperc3.com • Toll-free phone: 855-4EDISON (855-433-4766) • 877-995-5955 for log-in assistance • Toll-free fax: 800-862-5178 • E-mail: edisonorders@eaton.com Online Resources Visit www.edisonfuse.com for additional product information. Edison Circuit Protection www.edisonfuse.com Your authorized distributor is: Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com © 2014 Eaton All Rights Reserved Eaton is a registered trademark. Printed in USA Publication No.1005 All other trademarks are property November 2014 of their respective owners.