Effective June 2017 Technical Data 2033 Supersedes May 2005 GLQ (fuse) HLQ (fuse holder) Specialty fuse, fast-acting, size rejecting Catalog symbol: GLQ (fuse) HLQ (fuse holder) Fast-acting rejection style Ampere Rating: 1-10 Amperes Voltage Rating: 300 Volts AC or less Interrupting Rating: 10,000 Amperes Product features Agency information • Size of GLQ fuse varies with ampere rating. Fuse • GLQ fuses mount in HLQ size rejecting carriers • UL Listed, Std. 248-14, Guide JDYX, File E19180 (prevents overfusing). • CSA Certified, C22.2 No. 248.14, Class 1422-01, File 53787 • Fuse and knob are an integral one-piece unit. There Fuse holder are no replacement knobs (caps). • UL Recognized, Guide IZLT2, File E14853 • HLQ carrier comes with 6· of #18 red insulated CSA Certified, Class 6225-01, File 47235 solid copper wire attached to the line side. • Customer inserts a #18 insulated solid copper wire into load side receptacle. • Units can be panel mounted with a separate steel clip. For the knockout hole (see above), choose #BK/A-104. For the keyhole punch type hole, choose #6374 for panels .043” to .062” thick, or #4909 for panels .030” to .042” thick. • Do not put tension on line (rear) terminal of fuse- holder. Electrical Ratings for Type GLQ Fuses and Rejection Style Carriers Fuse Carrier Fuse Carrier GLQ-1 HLQ-1�‰`… GLQ-3 HLQ-3�‰`… GLQ-1�‰“ HLQ-1�‰`… GLQ-4 HLQ-5 GLQ-1�‰`… HLQ-1�‰`… GLQ-5 HLQ-5 GLQ-2 HLQ-3�‰`… GLQ-9 HLQ-10 GLQ-2�‰“ HLQ-3�‰`… GLQ-10 HLQ-10 CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to Data Sheet: 8002 or contact Application Engineering at 636-527-1270 for more information. GLQ (fuse) HLQ (fuse holder) Technical Data 2033 Effective June 2017 Specialty fuse, fast-acting, size rejecting Dimensional Data Time-Current Characteristic Curves–Average Melt AMPERE FUSE RATING 100 0.63" (15.9mm) 10 FUSE AND CARRIER 2.250'' 57.15mm .850'' .720'' 21.59mm 18.29mm Line Lead 1 .850'' C L 21.59mm Load Lead MOUNTING HOLE .255'' .870'' 6.48mm 22.10mm .1 .635'' .740'' 16.13mm 18.80mm .410'' 10.41mm Knockout Hole Keyhole Punch .01 CURRENT IN AMPERES Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton Eaton is a registered trademark. All Rights Reserved Printed in USA All other trademarks are property Publication No. 2033 SB02233 of their respective owners. June 2017 TIME IN SECONDS .1 1 1 1.5 2 5 10 10 15 100 200