F E S U F ® Bussmann Panel-Mount Fuseholder with Bayonet-type Knob HPS Series For ��‰£“• ¯ 1�‰`⁄• to 1�‰“• and SC and Class CC Fuses Dimensional Data With Fuse 2.81" Max. (71.4mm) 0.88" (22.2mm) 1.78" .250" – .003" (45.2mm) (6.35 – .08mm) (Typ. 2) 0.180" 0.80" (4.6mm) (20.2mm) 1.125" 2.41" Max. (28.6mm) (64.3mm) Without Fuse Mounting Hole Mounting Hole Flange Rear of Panel Flange Front of Panel Catalog Symbol: HPS, HPS-EE, HPS-FF, HPS-JJ, + 1.031" 0.003" + (26.2mm 0.08mm) and HPS-RR + 0.187" 0.002" Panel Mount + (4.75mm 0.05mm) Agency Information: UL Recognized, Guide IZLT2, File E14853 + 1.312" 0.003" 1.312" + 0.003" + + 0.890" 0.003" (33.3mm 0.08mm) (33.3mm + 0.08mm) + (22.6mm 0.08mm) CSA Certified: Class 6225-01, File 47235 Flammability Rating: UL 94 HB Maximum panel thickness, mounting flange in front of panel Electrical Ratings Assumes Pollution Degree 3 per UL 840: Conductive pollution, or dry, nonconductive pollution that Catalog Volts becomes conductive due to condensation that is expected. Symbol Amps AC Fuse Description (3) (4) ��‰£“ �‰“ Maximum panel thickness not including any sealing gaskets. HPS 30 600 •x 1 • ��‰£“ �‰¥ HPS-L 5 600 BBS, • ¯ 1 • fuses. System Voltage 600V 480 277 240 120 ��‰£“ �‰`⁄ HPS-EE 15 600 SC 0-15, • ¯ 1 • fuses. Fuseholder mm Inches mm Inches mm Inches mm Inches mm Inches ��‰£“ ��‰£“ HPS 1.50 1/32� 2.39 3/32� 6.66 1/4� 7.21 9/32� 8.69 5/8� HPS-JJ 20 600 SC 20, • ¯ 1 • fuses. (2) ��‰£“ �‰`⁄ HPS-F-EE 15 600 Sleeve on body, leaded for •¯1 • Thicker panels may be used if fuse holder load terminal is fully insulated, using a fuses. UL recognized (VW-1) insulative heat-shrink tubing, or if anticipated environment (2) (3) ��‰£“ �‰¥ HPS-FF 30 480 SC 25 & 30, • ¯ 1 • fuses. is of Pollution Degree 1 or 2, or if panel is nonconductive. (2) (3) HPS-RR 30 600 KTK-R, LP-CC, FNQ-R Class CC fuses. (1) (2) (3) Pollution Degree 2- Normally, only nonconductive pollution. However, a temporary ��‰£“ �‰¥ HPS-W 30 600 • ¯ 1 • fuses. conductivity caused by condensation may be expected. (1) No UL Recognition Pollution Degree 1- No pollution or only dry, nonconductive pollution. (2) No CSA Certification The pollution has no influence. (3) 20A max when used with quick connect terminals. (4) HPS rated at 25A for CSA. Maximum panel thickness, mounting flange behind the panel: 5.08mm/0.200� (flush to knob collar) General Information: • Bayonet-type knob. �‰¢ • Combination • quick-connect/solder terminals. (Standard solder type terminals available.) • The -EE, -JJ, -FF, and -RR holders are UL Recognized for applications requiring branch circuit protection. • Do not put tension on line (rear) terminal. CE logo denotes compliance with European Union Low Voltage Directive (50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con- tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. HPS Series Page 1 of 1 SB04184 6-3-04 Data Sheet: 2113 E S U F E S U