EATON BUSSMANN CH221B

Modular Fuseholder Selection Table (8x32, 14x51, and 22x58) Part Numbers Max No. of Catalog Numbers Series/ Voltage 17.5mm Box Maximum Size W/O Indication W/Indication & Current IEC UL Phase Configuration Modules* Qty. Wire Range Torque CH081D CH081DI • 1-pole 1 12 2 1-16mm (18-6 AWG) 2.5 N•m (22in-lb) CH081DNX - 400Vac • 1 Neutral Pole 1 12 2 CH081DNS CH081DNSI 25A • 1-pole + Neutral 1 12 1-10mm (18-8 AWG) 2.0 N•m (17.5in-lb) CH081DN CH081DNI • 1-pole + Neutral 2 6 1-16mm2 (18-8 AWG) 2.5 N•m (22in-lb) IEC CH08 CH082D CH082DI • 2-pole 2 6 400Vac 8X32 CH083D CH083DI • 3-pole 3 4 25A 2 1-16mm (18-6 AWG) 2.5 N•m (22in-lb) CH083DNS CH083DNSI • 3-pole + Neutral 3 4 CH083DN CH083DNI • 3-pole + Neutral 4 3 CH084D CH084DI UL/CSA • 4-pole 4 3 CH141D CH141DICH1 40A • † 1-pole 1.5 6 CH141DMS -14X51 (5 Watt) • 1-pole + Microswitch 1.5 6 UL/cURus CH141DNX - IEC • 1 Neutral Pole 1.5 6 600Vac/dc, CH141DN CH141DNI 690Vac, • 1-pole + Neutral 3 3 40A CH142D CH142DI 50A • † 2-pole 3 3 CH14 (5 Watt) CH143D CH143DI • † 3-pole 4.5 2 14X51 2 IEC 2.5-16mm (14-6 AWG) 3.0 N•m (26in-lb) CH143DMS - • 3-pole + Microswitch 4.5 2 690Vac, CH143DN CH143DNI UL • 3-pole + Neutral 6 1 50A CH143DNMS - 600Vac/dc, • 3-pole + Neutral + Microswitch 6 1 CH144D CH144DI 100A • 4-pole 6 1 CH221B NotCH22 (9.5 Watt) • † 1-pole 2 6 Not CH221BMS Available22X58IEC • 1-pole + Microswitch 2 6 Available UL/cURus CH221BNX with 690Vac, • 1 Neutral Pole 2 6 with 600Vac/dc, CH221BN local 125A • 1-pole + Neutral 4 3 local 100A CH222B neon • † 2-pole 4 3 CH22 2 neon (9.5 Watt) 2.5-50mm (14-1 AWG) 4.0 N•m (35in-lb) CH223B indicatio • † 3-pole 6 2 22X58 indication IEC CH223BMS (remote • 3-pole + Microswitch 6 2 (remote 690Vac, CH223BN microswitch • † 3-pole + Neutral 8 1 microswitch 125A CH223BNMS only) • 3-pole + Neutral + Microswitch 8 1 only) CH224B • 4-pole 8 1 † UL Recognized (cURus) †† UL LIsted (cULus) *Holder width as compared to standard, i.e., 1 = 17.5mm module 2 = 35mm. **90V miminum required for illumination Recommended Cooper Bussmann™ Fuses: 8x32 IEC Cylindrical - C08 Series 10x38 North American Class CC Fuses - LP-CC, FNQ-R, KTK-R Fuses - FNQ, KTK, AGU, KLM, BAF, FNM, FWA, FWC, C10 Series, PV Series 14x51 Fuses - FWX, FWH, FWP & NON, C14 Series 22x58 Fuses - FWP, C22 Series Manual Multi-phase Construction (8x32, 10x38, 14x51mm) Additional poles can be added by using the accessories shown on page 2 of this data sheet.The following components are required for each additional pole, up to a maximum of 4-poles. Part Number Description JV-L Multi-pole Connector Kit (10x38) CH810-HP 8x32 Handle Pin CH14-HP 14x51mm Handle Pin AL-D Multi-pole Connector Kit (8x32) Contact Cooper Bussmann Application Engineering for more information. 0210 BU-SB10208 Page 2 of 6 Data Sheet 2053 Accessories for use with the new CH Series of Modular Fuseholders (For diagram of multi-phase construction, see page 2) No. of Accessory For Use with Fuse Holders Part Number Box Quantity Poles Multi-Phase Connection Links CH08 and CH14 Series AL-D – 12 Multi-Phase Connection Kit* CHM and CHCC Series JV-L – – CH08 Series CH810-HP – Multi-Phase Handle Pins 12 CH14 Series CH14-HP – CH08 Series C08NL – Neutral Links CH14 Series C14NL – 10 CH22 Series C22NL – CH141 Series CH14MS-1D 1 5 Operated-Fuse Micro-Switches CH143 Series CH14MS-3D 3 2 † PLC Module (see page 6 for details) CHM and CHCC Series CH-PLC 11 IP20 Kit CH22 Series CH22IP20 – 12 Lock Support CH22 Series CH22LS – 5 *Kit contains 3-Spring pins and 6-connection links †UL Listed (cULus) Multi-Phase Connection Links Neutral Links Multi-Phase Handle Pins Programmable Logic Controller (PLC) Operated-Fuse Microswitches IP20 Kit Lock Support 0210 BU-SB10208 Page 3 of 6 Data Sheet 2053 Dimensions - mm (in) 8x32mm 10x38mm 82.75 3.258 10.00 0.394 45.00 1.772 71.88 2.830 17.50 42.83 0.689 1.686 35.00 52.83 1.378 2.080 52.50 60.83 2.067 2.395 70.00 2.756 14x51mm 0210 BU-SB10208 Page 4 of 6 Data Sheet 2053 Dimensions - mm (in) 22x58mm Using High Speed Fuses (Semiconductor Protection) The CH Series of modular fuse holders may be used in conjunction with Class gR and aR high speed fuses. The continuous load current should not exceed that shown in the tables below for specific high speed fuse types/amp ratings so that the watts loss of the fuse does not exceed the watts loss capability of the holder. High speed fuses may also need to be derated based on specific application and ambient temperature. CHM Series (10x38) CH22 Series (22x58) High High Maximum Maximum High Maximum Speed Speed Continuous Continuous Speed Continuous Fuse Fuse Amps Amps Amps Fuse FWA-5A10F 5 FWC-6A10F 6 FWP-20A22F 20 FWA-10A10F 10 FWC-8A10F 8 FWP-25A22F 25 FWA-15A10F 14 FWC-10A10F 10 FWP-32A22F 32 FWA-20A10F 18 FWC-12A10F 12 FWA-25A10F 20 FWC-16A10F 15 FWP-40A22F 40 FWA-30A10F 24 FWC-20A10F 16 FWP-50A22F 50 - - FWC-25A10F 19 FWP-63A22F 58 - - FWC-32A10F 21 FWP-80A22F 66 FWP-100A22F 78 CH14 Series (14x51) High High High High Maximum Maximum Maximum Maximum Speed Speed Speed Speed Continuous Continuous Continuous Continuous Fuse Fuse Fuse Fuse Amps Amps Amps Amps FWX-5A14F 5 FWH-5A14F 5 FWP-5A14F 5 FWP-32A14F 27 FWX-10A14F 10 FWH-10A14F 10 FWP-10A14F 10 FWP-40A14F 32 FWX-15A14F 15 FWH-15A14F 14 FWP-15A14F 14 FWP-50A14F 38 FWX-20A14F 20 FWH-20A14F 18 FWP-20A14F 18 - - FWX-25A14F 24 FWH-25A14F 21 FWP-25A14F 21 - - FWX-30A14F 27 FWH-30A14F 22 FWP-30A14F 22 - - Please contact Cooper Bussmann Application Engineering for more information regarding high speed fuse application. 0210 BU-SB10208 Page 5 of 6 Data Sheet 2053 Remote Fuse Monitoring Accessory – CH-PLC UL Class CC, Midget and IEC 10x38 fuses Minimum Circuit Voltage: Description • Minimum circuit voltage required across the CH holder is A resetable three-phase remote fuse monitor that 100Vac for the remote indication device to operate integrates with a Programmable Logic Controller (PLC) or Installation Technique: other monitoring and control equipment. • Mounts on the left side of the fuse holder and mechanically Specifications: interlocks with the fuse holder switch handle with hardware • Power Input: 24Vdc / 5mA provided • Sensing Voltage: 600V/30mA IP20 Rating: Yes • Output Signals: Digital 0Vdc (Low), 24Vdc (High) Environmental Data: - 0Vdc Low – Fuse is good • Storage and Operating Temperature: -20°C to 75°C - 24Vdc High – Fuse has opened When the fuse opens, the output signal is sent high and will Agency Information: remain high until the unit is reset • UL 508 • Rated Impulse Voltage: 8kV • cULus to CSA Standard 22.2 No.14 • Local Indication: Two distinct LEDs indicate unit power PLC Programming: (green) and open fuse (red). Upon the replacement of the • The CH-PLC signal line is designed to provide a digital fuse, the actuation of the reset switch will reset the open input to a PLC I/O card. fuse LED • Programmable Logic Control program must be written to • Flammability Rating: UL 94V0 properly interpret the input signal to the PLC. Wiring: • The PLC program should check for consecutive high signals • For power, signal and ground connections use 22-24AWG before taking action on a critical process. 2 (0.25mm ) 300V rated wire Emissions and Immunity Testing: • Electrostatic Discharge IEC 61000-4-2 • Electrical Fast Transient/Burst IEC 6100-4-4 • Surge Immunity IEC61000-4-5 Packaging: • The CH-PLC is packaged individually • A single unit monitors up to three phases • Package includes 0.11” (2.8mm) quick connects for power, signal and ground connections De-energize all circuits before installing or removing any CH-PLC devices and follow all prescribed safety procedures. The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical informa- tion that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. © 2010 Cooper Bussmann St. Louis, MO 63178 www.cooperbussmann.com 0210 BU-SB10208 Page 6 of 6 Data Sheet 2053