EATON BUSSMANN FP0705R1-R22-R

High Current, Low-Profile Power Inductors FLAT-PAC™ FP0705 Series Applications • Portable electronics • Servers and workstations • Data networking and storage systems • Notebook and desktop computers • Graphics cards and battery power systems • Multi-phase regulators • Voltage Regulator Module (VRM) SMD Device • DCR sensing Environmental Data Description • Storage temperature range: -40°C to +125°C • 125°C maximum total temperature operation • Operating temperature range: -40°C to +125°C • 7.0 x 7.0 x 4.95mm surface mount package (Range is application specific) • Ferrite core material, High current carrying capacity • Solder reflow temperature: J-STD-020D compliant • Low core losses Packaging • Controlled DCR tolerance for sensing circuits • Supplied in tape-and-reel packaging, 950 parts per reel, • Inductance range from 72nH to 220nH 13” dia. reel • Current range from 20 to 65 Amps, frequency range up to 2MHz • RoHS compliant Product Specifications 1 2 3 4 5 6 Part Number OCL ± 10% (nH) FLL Min. (nH) I (Amps) I 1 @ 25°C (Amps) I 2 @ 125°C (Amps) DCR (mOhm)@20°C K-factor rms sat sat R R1 1 V Ve er rs siio on n FP0705R1-R07-R 72 51 65 50 826 FP0705R1-R10-R 105 75 44 36 826 FP0705R1-R12-R 120 86 37 30 826 43 0.25 ± 10% FP0705R1-R15-R 150 108 30 24 826 FP0705R1-R18-R 180 130 25 20 826 FP0705R1-R22-R 220 158 20 16 826 R R2 2 V Ve er rs siio on n FP0705R2-R07-R 72 51 65 50 826 FP0705R2-R10-R 105 75 44 36 826 FP0705R2-R12-R 120 86 37 30 826 38 0.32 ± 9.4% FP0705R2-R15-R 150 108 30 24 826 FP0705R2-R18-R 180 130 25 20 826 FP0705R2-R22-R 220 158 20 16 826 R R3 3 V Ve er rs siio on n FP0705R3-R07-R 72 51 65 50 826 FP0705R3-R10-R 105 75 44 36 826 FP0705R3-R12-R 120 86 37 30 826 32 0.46 ± 6.5% FP0705R3-R15-R 150 108 30 24 826 FP0705R3-R18-R 180 130 25 20 826 FP0705R3-R22-R 220 158 20 16 826 1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10V , 0.0Adc 4I 1: Peak current for approximately 20% rolloff at +25°C. rms sat 2 Full Load Inductance (FLL) Test Parameters: 100kHz, 0.1V ,I 1 5I 2: Peak current for approximately 20% rolloff at +125°C. rms sat sat 3I : DC current for an approximate temperature rise of 40°C without core loss. Derating is -3 rms 6 K-factor: Used to determine B for core loss (see graph). B = K L ΔI 10 ,B : (Gauss), * * * p-p p-p p-p necessary for AC currents. PCB pad layout, trace thickness and width, air-flow and proximity of K: (K-factor from table), L: (inductance in nH),ΔI (peak-to-peak ripple current in amps). other heat generating components will affect the temperature rise. It is recommended the part 7 Part Number Definition: FP0705Rx-Rxx-R temperature not exceed 125°C under worst case operating conditions verified in the end • FP0705 = Product code and size • Rx is the DCR indicator application. • Rxx= Inductance value in μH, R = decimal point • “-R” suffix = RoHS compliant 05-05-08 BU-SB08210 Page 1 of 4 Data Sheet: 4325 Dimensions - mm A = 7.0 Max. B = 7.0 Max. C = 4.95 Max. D = 2.45 ± 0.2 E = 1.52 ± 0.2 F = 3.5 Typ. Top View Side View Bottom View Recommended Pad Layout Schematic b C 3.1 B 1 2.0 E 1 A 0705Rx 3.3 F Rxx wwllyy R 2 2 D Nominal DCR is measured from point “a” to point “b.” a Part Marking: Coiltronics Logo 0705Rx (Rx = DCR indicator) Rxx = inductance value in μH (R = decimal point) wwllyy = date code R = revision level Packaging Information - mm 1.5 2.0 1.75 A 4.0 dia. 1 6.5 7.1 7.5 16.00 0705Rx ±0.30 Rxx wwllyy R 3.5 2 7.1 1.5 B B 5.1 A dia 12.0 SECTION B-B SECTION A-A User direction of feed Supplied in tape-and-reel packaging, 950 parts per reel, 13” diameter reel. Temperature Rise vs. Total Loss 80 60 40 20 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Total Loss (W) 05-05-08 BU-SB08210 Page 2 of 4 Data Sheet: 4325 Temperature Rise (°C) Inductance Characteristics OCL vs. I 1 sat 100% 80% 60% 40% +125°C 20% +25°C -40°C 0% 0% 20% 40% 60% 80% 100% 120% % of I 1 sat Core Loss Core Loss vs. B p-p 1MHz 10 500kHz 300kHz 1 200kHz 100kHz 0.1 0.01 0.001 0.0001 0.00001 100 1000 10000 B (Gauss) p-p 05-05-08 BU-SB08210 Page 3 of 4 Data Sheet: 4325 Core Loss(W) % of OCL Solder Reflow Profile T P T Taabbllee 1 1 - - S Sttaan nddaar rdd S Sn nP Pbb S So ollddeer r ((T T )) T -5°C c c C t Max. Ramp Up Rate = 3°C/s P Volume Volume Max. Ramp Down Rate = 6°C/s 3 3 Package mm mm _ Thickness <350 >350 T L <2.5mm 235°C 220°C Preheat t A _ >2.5mm 220°C 220°C T smax T Taabbllee 2 2 - - L Leeaadd ((P Pbb)) F Fr reeee S So ollddeer r ((T T )) c c Volume Volume Volume Tsmin 3 3 3 t s Package mm mm mm Thickness <350 350 - 2000 >2000 <1.6mm 260°C 260°C 260°C 1.6 – 2.5mm 260°C 250°C 245°C >2.5mm 250°C 245°C 245°C 25°C Time 25°C to Peak Time Reference JDEC J-STD-020D Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and Soak• Temperature min. (T ) 100°C 150°C smin • Temperature max. (T ) 150°C 200°C smax • Time (T to T ) (t ) 60-120 Seconds 60-120 Seconds smin smax s Average ramp up rate T to T 3°C/ Second Max. 3°C/ Second Max. smax p Liquidous temperature (TL) 183°C 217°C Time at liquidous (t ) 60-150 Seconds 60-150 Seconds L Peak package body temperature (T )* Table 1Table 2 P Time (t )** within 5 °C of the specified classification temperature (T ) 20 Seconds** 30 Seconds** p c Average ramp-down rate (T to T ) 6°C/ Second Max. 6°C/ Second Max. p smax Time 25°C to Peak Temperature6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (T ) is defined as a supplier minimum and a user maximum. p ** Tolerance for time at peak profile temperature (t ) is defined as a supplier minimum and a user maximum. p North America Europe Asia Pacific Cooper Electronic Technologies Cooper Bussmann Cooper Electronic Technologies Cooper Electronic Technologies Cooper Electronic Technologies 1225 Broken Sound Parkway NW P.O. Box 14460 Cooper (UK) Limited Avda. Santa Eulalia, 290 1 Jalan Kilang Timor Suite F St. Louis, MO 63178-4460 Burton-on-the-Wolds #06-01 Pacific Tech Centre 08223 Boca Raton, FL 33487-3533 Tel: 1-636-394-2877 Leicestershire • LE12 5TH UK Terrassa, (Barcelona), Spain Singapore 159303 Tel: 1-561-998-4100 Fax: 1-636-527-1607 Tel: +44 (0) 1509 882 737 Tel: +65 278 6151 Tel: +34 937 362 812 Fax: 1-561-241-6640 Fax: +44 (0) 1509 882 786 +34 937 362 813 Fax: +65 270 4160 Toll Free: 1-888-414-2645 Fax: +34 937 362 719 The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, with- out notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. © 2008 Cooper Bussmann St. Louis, MO 63178 www.cooperbussmann.com 05-05-08 BU-SB08210 Page 4 of 4 Data Sheet: 4325 Temperature