EATON BUSSMANN FP1107R1-R15-R

Effective June 2017 Technical Data 4342 Supersedes August 2009 FP1107 High frequency, high current power inductors Applications • Multi-phase regulators • Voltage Regulator Module (VRM) • Desktop and server VRMs and EVRDs • Data networking and storage systems • Graphics cards and battery power systems • Point-of-load modules • DCR sensing Environmental data SMD Device • Storage temperature range (component): -40 °C to +125 °C Product features • Operating temperature range: -40 °C to +125 °C • 7.2 x 11.0 x 7.5mm surface mount package (ambient plus self-temperature rise) • Ferrite core material • Solder reflow temperature: • High current carrying capacity, low core losses J-STD-020 (latest revision) compliant • Controlled DCR tolerance for sensing circuits HALOGEN • Inductance range from 70nH to 510nH Pb HF • Current range from 18 amps to 140 amps FREE • Frequency range up to 2MHz FP1107 Technical Data 4342 Effective June 2017 High frequency, high current power inductors Product Specifications 7 1 2 3 4 5 6 Part Number OCL ± 10% (nH) FLL Min. (nH) I (Amps)I 1 @ 25°C (Amps) I 2 @ 125°C (Amps) DCR (mΩ) @ 20°C K-factor rms sat sat R1 Version FP1107R1-R07-R 70 50 140 123 361.1 FP1107R1-R12-R 120 86 90 72 361.1 FP1107R1-R15-R 150 108 70 56 361.1 FP1107R1-R23-R 230 166 55 45 36 0.29 ± 8% 361.1 FP1107R1-R30-R 300 217 35 28 361.1 FP1107R1-R40-R 400 288 25 20 361.1 FP1107R1-R51-R 510 364 18 14.5 361.1 R2 Version FP1107R2-R07-R 70 50 140 123 363.3 FP1107R2-R12-R 120 86 90 72 363.3 FP1107R2-R15-R 150 108 70 56 363.3 FP1107R2-R23-R 230 166 42 45 36 0.47 ± 6.4% 363.3 FP1107R2-R30-R 300 217 35 28 363.3 FP1107R2-R40-R 400 288 25 20 363.3 FP1107R2-R51-R 510 364 18 14.5 363.3 4 I 1: Peak current for approximately 20% rolloff at +25°C. 5 I 2: 1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10V , 0.0Adc sat sat rms 2 Full Load Inductance (FLL) Test Parameters: 100kHz, 0.1V , I 1 5 Peak current for approximately 20% rolloff at +125°C. rms sat 3 I : DC current for an approximate temperature rise of 40°C without core loss. Derating is rms -3 6 K-factor: Used to determine B for core loss (see graph). B = K L ΔI 10 , B : (Gauss), p-p p-p * * * p-p necessary for AC currents. PCB pad layout, trace thickness and width, air-flow and proximity of other heat K: (K-factor from table), L: (inductance in nH), ΔI (peak-to-peak ripple current in amps). generating components will affect the temperature rise. It is recommended the part temperature not exceed 7 Part Number Definition: FP1107Rx-Rxx-R 125°C under worst case operating conditions verified in the end application. Rx is the DCR indicator FP1107 = Product code and size Rxx= Inductance value in μH, R = decimal point “-R” suffix = RoHS compliant Dimensions- mm Bottom View Top View Side View Recom m ended Pad Layout Schematic F P 1 1 0 7 R 1-R = 7 .50 max 7.2 m ax F P 1 1 0 7 R 2-R = 7 .20 max 1.90 b 1 2.1 +/-0.15 1 3.1 1 11.0 5.0 1107Rx 5.8 typ max Rxx 2 wwllyy R C 2 2 a The nominal DCR is measured from point “a” to point”b.” Part Marking: 1107Rx (Rx = DCR Indicator) Rxx = Inductance value in μH. (R = Decimal point) wwllyy = Date code R = Revision level Packaging information - mm 4.0 1.5 dia. 2.0 1.75 1 11.5 24 1107Rx +/-0.3 11.1 Rxx wwllyy R 2 7.6 1.5 dia. 12.0 Section A-A Section B-B User direction of feed 7.4 Supplied in tape-and-reel packaging, 640 parts per reel, 13” diameter reel. www.eaton.com/electronics 2 FP1107 Technical Data 4342 Effective June 2017 High frequency, high current power inductor Temperature rise vs total loss 80 60 40 20 FP 1107R 1 FP 1107R 2 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 T o ta l Lo ss (W ) Core loss vs Bp-p 1MHz 10 500kHz 300kHz 200kHz 1 100kHz 0.1 0.01 0.001 100 1000 10000 B (G a uss) p-p Inductance characteristics % o f O C L vs % o f I 1 sa t 100% -40°C 80% +25°C 60% 40% +125°C 20% 0% 0% 20% 40% 60% 80% 100% 120% 140% % o f I 1 sa t 3 www.eaton.com/electronics Core Loss (W ) % o f O C L T e m p e ra tu re R ise (°C ) FP1107 Technical Data 4342 High frequency, high current power inductor Effective June 2017 Solder Reflow Profile TP Table 1 - Standard SnPb Solder (T ) Table 1 - Standard SnPb Solder (T ) T -5°C c c C t Max. Ramp Up Rate = 3°C/s P Volume Volume Max. Ramp Down Rate = 6°C/s 3 3 Package mm mm _ Thickness <350 >350 T L <2.5mm 235°C 220°C Preheat t A _ >2.5mm 220°C 220°C T smax T Taabbllee 2 2 - - L Leeaadd ((P Pbb)) F Fr reeee S So ollddeer r ((T T )) c c Volume Volume Volume T smin 3 3 3 t s Package mm mm mm Thickness <350 350 - 2000 >2000 <1.6mm 260°C 260°C 260°C 1.6 – 2.5mm 260°C 250°C 245°C >2.5mm 250°C 245°C 245°C 25°C Time 25°C to Peak Time Reference JDEC J-STD-020 Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and Soak Temperature min. (T ) 100°C 150°C smin T emperature max. (T ) 150°C 200°C smax Time (T to T ) (t ) 60-120 Seconds 60-120 Seconds smin smax s Average ramp up rate T to T 3°C/ Second Max. 3°C/ Second Max. smax p Liquidous temperature (TL) 183°C 217°C Time at liquidous (t ) 60-150 Seconds 60-150 Seconds L Peak package body temperature (T )* Table 1 Table 2 P Time (t )** within 5 °C of the specified classification temperature (T ) 20 Seconds** 30 Seconds** p c Average ramp-down rate (T to T ) 6°C/ Second Max. 6°C/ Second Max. p smax Time 25°C to Peak Temperature 6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (T ) is defined as a supplier minimum and a user maximum. p ** Tolerance for time at peak profile temperature (t ) is defined as a supplier minimum and a user maximum. p Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton Eaton is a registered trademark. All Rights Reserved Printed in USA All other trademarks are property Publication No. 4342 of their respective owners. June 2017 Temperature