EATON BUSSMANN HCPT1309-2R2-R

HCPT1309 Series Power Inductors Description RoHS 2002/95/EC • 105°C maximum total temperature operation • 13.2mm x 13.2mm x 9.0mm through hole package • Core material: Powder Iron • Inductance range from 0.20μH to 3.3μH • Current range from 90.0 Amps to 11.4 Amps • Frequency range up to 1MHz Applications • Next generation processors • High current DC-DC converters • VRM, multi-phase buck regulator • Desktop computers • Video game power Packaging Environmental Data • Supplied in bulk packaging, 100 parts per tray • Storage temperature range: -40°C to +105°C • Operating temperature range: -40°C to +105°C (range is application specific) • Solder reflow temperature: +260°C max. for 10 seconds maximum Part Number OCL (1) Irms (2) Isat Amperes (3) Isat Amperes (4) DCR (mΩ) K-factor nominal +/- Amperes Peak 20% Peak 30% nom @20°C (5) 20% (μH) rolloff @20°C rolloff @20°C HCPT1309-R20-R 0.20 43.1 72.2 90.0 0.426 154.1 HCPT1309-R47-R 0.49 34.0 43.3 55.0 0.624 92.4 HCPT1309-1R0-R 0.96 19.4 30.9 40.0 1.90 66.0 HCPT1309-1R5-R 1.59 13.7 24.1 30.6 3.82 51.4 HCPT1309-2R2-R 2.27 12.5 19.7 25.0 4.10 42.0 HCPT1309-3R3-R 3.31 11.4 16.7 21.0 4.80 35.6 (1) OCL: Open Circuit Inductance test parameters: 100kHz, 0.1Vrms, 0.0Adc. (3) Isat Amperes peak for approximately 20% rolloff (@20°C) (2) Irms: DC current for an approximate ΔT of 40°C without core loss. Derating is (4) Isat Amperes peak for approximately 30% rolloff (@20°C) necessary for AC currents. PCB layout, trace thickness and width, air-flow, and (5) K-factor: Used to determine B p-p for core loss (see graph). proximity of other heat generating components will affect the temperature rise. It B p-p = K*L*ΔI, B p-p: (Gauss), K: (K factor from table), L: (Inductance in uH), is recommended that the temperature of the part not exceed 105°C under worst ΔI (Peak to peak ripple current in Amps). case operating conditions verified in the end application. Mechanical Diagrams TOP VIEW FRONT VIEW BOTTOM VWE I 9.0 max 13.2 sq HCPT1309-xxx MAX 1 2 wwllyy R 3.5 +/- 0.5 "A" MAX "B" +/- 1.0 "C" typ SCHEMATIC Dimension Table RECOMMENDED PCB PAD LAYOUT 1 ØD Part No "A" "B" "C" "D" "B" +/- 1.0 HCPT1309-R20 14.0 12.2 1.63 2.13 HCPT1309-R47 14.0 12.2 1.63 2.13 HCPT1309-1R0 13.7 12.0 1.29 1.6 HCPT1309-1R5 13.5 11.8 1.15 1.40 HCPT1309-2R2 13.5 11.8 1.15 1.40 2 HCPT1309-3R3 13.5 11.8 1.15 1.40 Dimensions are in millimeters. wwllyy = Date Code. R = Revision Level. HCPT1309 Series Power Inductors Core Loss Core Loss vs. B p-p 160.00 140.00 120.00 200kHz 300kHz 100.00 400kHz 500kHz 80.00 600kHz 700kHz 800kH 60.00 900kHz 1.0MHz 40.00 20.00 0.00 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 B p-p (Gauss) Inductance Characteristics OCL vs Isat 100 90 80 70 60 50 40 30 20 10 0 0 20 40 60 80 100 120 140 160 %of Isat PM-4138 3/07 Visit us on the Web at www.cooperbussmann.com 1225 Broken Sound Pkwy. Suite F Boca Raton, FL 33487 © Cooper Electronic Technologies 2007 Tel: +1-561-998-4100 Toll Free: +1-888-414-2645 Fax: +1-561-241-6640 This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Electronic Technologies does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Core Loss (mW) OCL (%)