Connectors Connectors Section Contents Page Rail mount terminal blocks NDN Series 35mm DIN rail mount blocks . . . . . . . . 304-305 N512-BK 12-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 306 NFT2-WH 2-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 306 NFT3-_ _ 3-pole block . . . . . . . . . . . . . . . . . . . . . . . . . .306 NC3-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . . 307 NSE3-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 307 NSS3-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 307 Rail mount disconnect terminal blocks 15188 Series 3- and 4-Pole blocks . . . . . . . . . . . . . . . . 308 15288 Series 3-Pole block . . . . . . . . . . . . . . . . . . . . . . 308 Sectional terminal blocks PLU3-_ _ 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . .309 PLU1-WH 1- to 3-Pole block . . . . . . . . . . . . . . . . . . . . . 309 PSU1-WH 1- to 3-Pole block . . . . . . . . . . . . . . . . . . . . . 309 KT3-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . . 310 KT4-WH 4-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . . 310 PLK-3_ _ 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 310 Quick-connect terminal blocks NTQ23-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . 311 BNQ21-WH 1-Pole block . . . . . . . . . . . . . . . . . . . . . . . . 311 BQQ41-WH 1-Pole block . . . . . . . . . . . . . . . . . . . . . . . . 311 Double row terminal blocks Series TB100 2- to 36-Pole blocks . . . . . . . . . . . . . 312-313 Series TB200 & TB200HB 2- to 30-Pole blocks . . . .314-315 Series TB300 & TB345 2- to 24-Pole blocks . . . . . .298-299 Marking options and covers for double row series ......................... .318 Top & bottom marking strips for double row terminal blocks ...................319 Series TB400 2- to 12-Pole double row terminal blocks . . . . . . . . . . . . . . . . . . . . . . . . .320 Series KU 2- to 12-Pole base mount double row terminal blocks . . . . . . . . . . . . . . . . . . . . . . 321 Series TS finger-safe terminal blocks 2- to 12-Pole standard base . . . . . . . . . . . . . . . . . . . . . 322 2- to 12-Pole flat base . . . . . . . . . . . . . . . . . . . . . . . . . . 323 2- to 12-Pole raised base . . . . . . . . . . . . . . . . . . . . . . . .324 303 Connectors Rail Mount Terminal Blocks NDN Series Specifications Description: High-density, snap-on 35mm DIN rail compatible rail mount terminal blocks. Construction: Unique, impact resistant, one-piece thermoplastic moldings. Heat treated stainless steel collars (to secure wires). Tin-plated copper alloy terminals. Zinc-plated steel screws. Circuits Per Foot: Up to 48 circuits per foot. Agency Information: CE, UL E62622; CSA LR15364. Flammability Rating: UL 94V2 NDNV4-__ __(color) NDN3-__ __(color) NDN63-__ __(color) Specifications Specifications Specifications Description: Rail mount terminal Description: Rail mount terminal Description: Rail mount terminal block. block. block. Rating: NDNV4 30A, 600V Rating: 30A - field wiring: 40A - Rating: 65A, 600V factory wiring 600V Center Spacing: 0.25" (6.35mm) Center Spacing: 0.375" (9.52mm) Center Spacing: 0.300" (7.62mm) Number of Poles: 4 Number of Poles: 3 Number of Poles: 3 Circuits Per Foot: 48 Circuits Per Foot: 30 Circuits Per Foot: 38 Circuit Jumper: JN4, 4 circuits Circuit Jumper: JN3, 2 circuits Circuit Jumper: JNDN3, 2 circuits Wire Range: AWG #10-22 CU Wire Range: AWG #6-18 CU Wire Range: AWG #10-22 CU Screw Size: #6-32 Screw Size: #10-32 Screw Size: #6-32 Mounting Options: 35mm DIN rail, Mounting Options: 35mm DIN rail, Mounting Options: 35mm DIN rail, C-rail C-rail C-rail Marking Tape: MT12-1-2 Marking Tape: MTC6 Marking Tape: MT12-1-2 Torque Rating: 35 lb-in Torque Rating: 18 lb-in Torque Rating: 18 lb-in Operating Temperature: 105°C Operating Temperature: 105°C Operating Temperature: 105°C Agency Information: UL File E62622, Agency Information: UL File E62622, Agency Information: UL File E62622, CSA File 15364. CSA File 15364. CSA File 15364. Catalog Numbers Catalog Numbers Catalog Catalog Numbers Catalog Catalog Numbers Colors Numbers Colors Numbers Colors NDN63-WH White (Standard) NDNV4-WH White (Standard) NDN3-WH White (Standard) NDN63-BK Black NDNV4-BK Black NDN3-BK Black NDN63-YE Yellow NDNV4-YE Yellow NDN3-BL Blue NDN3-RE Red NDN3-YE Yellow For more information, visit www.cooperbussmann.com 304 Connectors Connectors Rail Mount Terminal Blocks NDN1-WH NDN111-__ __(color) Specifications Specifications Description: Rail mount Description: Rail mount terminal terminal block. block. Rating: 90A, 600V Rating: 90A, 600V Center Spacing: 0.635" Center Spacing: 0.635" (16.13mm) (16.13mm) Number of Poles: 3 Number of Poles: 1 Circuits Per Foot: 18 Circuits Per Foot: 18 Circuit Jumper: JN1, 2 circuits Wire Range: AWG #2-18 Cu Wire Range: AWG #2-18 Cu Screw Size: #1/4-28 Screw Size: #1/4-28 Mounting Options: 35mm DIN rail, C-rail Mounting Options: 35mm DIN rail, C-rail, Base Mount * Dove-tail option is available for mounting side-by-side. * Dove-tail option is available for mounting side-by-side. Order part no. NDN1A-WH Order part no. NDN111-A Marking Tape: MT12-1-2 Marking Tape: MT12-1-2 Torque Rating: 32 lb-in Torque Rating: 32 lb-in Operating Temperature: 105°C Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 47235 Agency Information: UL File E62622, CSA File 47235 Catalog Numbers Catalog Numbers Catalog Catalog Number Color Numbers Colors NDN1-WH White NDN111-WH White (Standard) NDN111-BK Black NDN111-BL Blue NDN111-RE Red NDN111-YE Yellow NDN111A-WH White NDN111A-BK Black (Standard) NDN111A-YE Yellow NDN Series Terminal Block Accessories NDNA NDNAS NFTA NRA SOA72 MARKING JUMPERS 35mm DIN Rail 35mm DIN Rail C-Rail C-Rail 72" Long TAPE See Series Aluminum End Stop Aluminum Low Profile Stand-Off Channel See Series Specifications NDNA 100 1 meter Lengths to 72" No Flange For C-Rail Specifications NDNA 200 2 meters Aluminum Lengths to 37-1/2" For more information, visit www.cooperbussmann.com 305 Connectors Rail Mount Terminal Blocks N512-BK NFT2-__ __(color) NFT3-__ __(color) Specifications Specifications Specifications Description: Rail Description: Rail mount Description: Rail mount terminal terminal block. mount terminal block. block. Rating: 40A, 600V; Rating: 40A, 600V Rating: 5A, 600V; 20A, 300V 55A Factory 55A Factory Wired Wired Center Spacing: 0.197" (5.00mm) Center Spacing: 0.281" (7.13mm) Center Spacing: 0.390" (9.91 mm) Number of Poles: 12 Number of Poles: 2 Number of Poles: 3 Circuits Per Foot: 60 Circuits Per Foot: 38 Circuits Per Foot: 28 Circuit Jumper: JN512, 12 circuits Circuit Jumper: JN2, 2 circuits Circuit Jumper: JN3, 2 circuits Wire Range: AWG #12-22 Cu Wire Range: AWG #8-22 Cu Wire Range: AWG #8-22 Cu Screw Size: #4-48 Screw Size: #8-32 Screw Size: #8-32 Mounting Options: C-rail, 15mm DIN rail Mounting Options: C-rail Mounting Options: C-rail Marking Tape: AT512 Marking Tape: MT12-1-2 Marking Tape: MT12-1-2 Torque Rating: 12 lb-in Torque Rating: 18 lb-in Torque Rating: 18 lb-in Operating Temperature: 105°C Operating Temperature: 105°C Operating Temperature: 105°C Agency Information: CSA File 15364. Agency Information: UL File E62622, Agency Information: UL File E62622, CSA File 15364. CSA File 47235. Catalog Numbers Catalog Numbers Catalog Numbers Catalog Catalog Catalog Number Color Numbers Colors Numbers Colors N512-BK Black NFT2-WH White NFT3-WH White (Standard) NFT2-BK Black NFT3-BK Black NFT2-BL Blue NFT3-BL Blue NFT2-RE Red NFT3-RE Red NFT3-YE Yellow Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) 0.07 1.29 0.60 (1.78) (32.94) (15.44) 2.40 0.93 0.36 (60.96) 1.18 1.29 (23.80) (9.14) (29.97) (32.94) 0.88 (22.35) 1.68 1.23 (42.82) (31.34) 1.23 (31.37) 1.09 0.65 (27.68) (16.51) For more information, visit www.cooperbussmann.com 306 Connectors Connectors Rail Mount Terminal Blocks NC3-__ __(color) NSE3-WH NSS3-__ __(color) Specifications Specifications Specifications Description: Rail Description: Description: Rail mount mount terminal Rail mount terminal block. block. terminal block. Rating: 30A, 600V Rating: 175A, 600V Rating: 115A, Center Spacing: 0.385" 600V Center Spacing: (9.77mm) 1.06" (26.92mm) Center Spacing: 1.06" (26.92mm) Number of Poles: 3 Number of Poles: 3 Number of Poles: 3 Circuits Per Foot: 28 Circuits Per Foot: 11 Circuits Per Foot: 11 Circuit Jumper: JNSS3, 2 circuits Wire Range: 2/0-#14 Cu/Al Circuit Jumper: JNSE3, 2 circuits Wire Range: For use with wire Screw Size: 5/16-24 Wire Range: For use with wire crimped to ring terminal crimped to ring terminal Mounting Options: C-rail, Base Screw Size: #6-32 Mount Screw Size: #1/4-28 Mounting Options: C-rail Marking Tape: MT12-1-2 Mounting Options: C-rail, Base Marking Tape: MT12-1-2 Mount Torque Rating: 45 lb-in Torque Rating: 12 lb-in Marking Tape: MT12-1-2 Operating Temperature: 105°C Operating Temperature: 105°C Agency Information: UL File E62622, Torque Rating: 32 lb-in Agency Information: UL File E62622, CSA File 15364. Operating Temperature: 105°C CSA File 15364. Agency Information: UL File E62622, Catalog Numbers Catalog Numbers CSA File 15364. Catalog Catalog Number Color Number Color Catalog Numbers NC3-WH White Catalog NSS3-WH White NC3-BK Black NSS3-BK Black Number Color NSE3-WH White Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) 1.25 3.12 1.75 (31.75) 1.24 (79.38) (44.45) 0.250 x 0.190 (31.50) mtg. slots 1.75 1.75 (44.45) (44.45) 1.25 (31.75) 1.25 0.250 x 0.190" (31.75) mtg. slots 1.53 (38.86) 3.12 (79.24) 1.32 (33.73) For more information, visit www.cooperbussmann.com 307 Connectors Rail Mount Disconnect Terminal Blocks 15188 Series 15288 Series Specifications Specifications Description: Disconnect terminal Description: blocks for 35mm DIN rail mount. Disconnect terminal Rating: 30A, 600V* blocks for Center Spacing: 0.375” 35mm DIN rail (9.52mm) mount. Wire Range: #12-16 AGW Cu Rating: 65A, 600V* Screw Size: #6-32 zinc-plated philslot Center Spacing: 0.54” (13.7mm) Number of Poles: 3- and 4-pole only Wire Range: #6-16 AWG Mounting: 35mm DIN Rail Screw Size: #8-32 zinc-plated philslot Optional End Stop NDNAS Number of Poles: 3-pole only Jumpers: 2- through 4-pole available Mounting: 35mm DIN Rail Materials: Molded Base: UL rated 94V-2 thermoplastic. Optional Accessories: Optional End Stop NDNAS Tin plated copper alloy contacts. (order optional accessories seperately) Torque Rating: 12 lb-in Materials: Molded Base: UL rated 94V2 thermoplastic. Operating Temperature: 105°C Tin-plated copper alloy contacts. Agency Information: UL File E62622, CSA File 47235. Torque Rating: 20 lb-in (30 lb-in for 8AWG bare wire) * 30A rating achieved with #10AWG wire crimped to ring terminal; 25A without. Operating Temperature: 105°C (221°F) Agency Information: UL File E62622 Catalog Number Build-A-Code *CSA rating achieved with #6 AWG wire crimped to ring terminal 50A without. Series Poles Wiring Options Catalog Number Build-A-Code 15188 – 3 to 4 Blank = In-line S = Locking Snap Series Poles Wiring Options** R = Reverse 15288 – 3 Blank = In-line S = Snap R = Reverse ST = Screw Together Dimensions - in (mm) SS = Solid DIN Rail Snap In-Line Wiring Direction **Options can be combined, e.g. STSS 3 Pole = 1.19 (30.22) Dimensions - in (mm) 4 Pole = 1.56 (39.62) Reverse Wiring Direction 1.70 (43.2) 2.30 (58.4) for ST option 1.94 (49.27) 0.54 (13.7) 1.94 (49.27) Reverse Wiring Direction 3 Pole = 1.19 (30.22) 4 Pole = 1.56 (39.62) 0.375 0.22 (9.52) (5.58) In-Line Wiring Direction 1.70 (43.2) 1.94 (49.27) 1.94 (49.27) For more information, visit www.cooperbussmann.com 308 Connectors Connectors Sectional Terminal Blocks PLU3-_ _(color) PLU1-WH PSU1-WH Specifications Specifications Specifications Description: Description: Description: Depluggable rail Depluggable rail Depluggable rail mount sectional mount sectional mount sectional terminal block. terminal block. terminal block. Rating: 40A, 600V Rating: 70A, 600V Rating: 45A*, 600V *45A rating achieved with ring terminal crimped to wire. Center Spacing: 0.390" (9.91mm) Center Spacing: 0.625" (15.88mm) Center Spacing: 0.625" (15.88 mm) Number of Poles: 3 Number of Poles: 1-3 Number of Poles: 1-3 Circuits Per Foot: 28 Part Numbers: • PLU1 (1-pole) Part Number: Circuit Jumper: JN3, 2 circuits • PLU11 (2-pole) • PSU1 (1-pole) Wire Range: AWG #8-22 Cu • PLU111 (3-pole) • PSU11 (2-pole) Screw Size: #8-32 Circuits Per Foot: 19 • PSU111 (3-pole) Mounting Options: C-rail, Stackable Circuit Jumper: JN1, 2 circuits Circuits Per Foot: 19 Marking Tape: MT12-1-2 Wire Range: AWG #4-18 Cu Wire Range: For use with crimp on Torque Rating: 18 lb-in connectors only. Screw Size: #1/4-28 Operating Temperature: 105°C Screw Size: #10-32 Mounting Options: C-rail, Stackable Agency Information: UL File E62622, Mounting Options: C-rail, Stackable Marking Tape: MT12-1-2 CSA File 15364. Marking Tape: MT12-1-2 Torque Rating: 32 lb-in Catalog Numbers Torque Rating: 24 lb-in Operating Temperature: 105°C Catalog Agency Information: UL File E62622, Operating Temperature: 105°C Number Color CSA File 15364. Agency Information: UL File E62622, PLU3-WH White (Standard) CSA File 15364 PLU3-BK Black Catalog Numbers PLU3-YE Yellow Catalog Catalog Numbers Number Poles Color Catalog PLU1-WH 1 White Number Poles Color PLU11-WH 2 White PSU1-WH 1 White PLU111-WH 3 White PSU11-WH 2 White PSU111-WH 3 White Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) 1.85 1.93 1.25 (46.99) (49.12) (31.75) 1.87 1.48 0.625 1.48 (15.88) (37.64) (47.49) (37.59) 0.59 1.79 (14.98) (45.64) 1.25 1.25 1.85 (31.75) (31.75) (46.99) 2.44 (62.10) 1.30 1.25 (33.00) 0.43 (31.75) (11.10) For more information, visit www.cooperbussmann.com 309 Connectors Sectional Terminal Blocks KT3-_ _(color) KT4-_ _(color) PLK3-WH Specifications Specifications Specifications Description: Description: Description: Depluggable rail Depluggable rail Depluggable rail mount sectional mount sectional mount sectional terminal block. terminal block. terminal block. Rating: 40A, 600V Rating: 30A, Rating: 40A, 600V 600V Center Spacing: 0.390" (9.91mm) Center Center Spacing: 0.25" (6.35mm) Spacing: 0.39" Number of Poles: 3 (9.91mm) Number of Poles: 4 Circuits Per Foot: 28 Number of Poles: 3 Part Number: Circuit Jumper: JN3, 2 circuits •KT4-WH-A Circuits Per Foot: 28 Wire Range: AWG #8-22 Cu •KT4-WH-B Circuit Jumper: JN3, 2 circuits Screw Size: #8-32 Note: When used in series must order A and B Wire Range: AWG #8-22 Cu Mounting Options: Base Mount, Circuits Per Foot: 48 Screw Size: #8-32 Stackable Circuit Jumper: JN4, 4 circuits Mounting Options: Base Mount, Marking Tape: MT12-1-2 Wire Range: AWG #10-22 Cu Stackable; End Piece (Part No. KAD) Torque Rating: 18 lb-in Screw Size: #6-32 is required for mounting. Mounting Operating Temperature: 105°C Mounting Options: Base Mount Agency Information: UL File E62622, screws recommended every 15 circuits. Mounting screws recommended every CSA File 15364 Marking Tape: MT12-1-2 12 circuits Torque Rating: 18 lb-in Catalog Numbers Marking Tape: MTC6 Catalog Operating Temperature: 105°C Torque Rating: 18 lb-in Number Color Agency Information: UL File E62622 Operating Temperature: 105°C KT3-WH White Catalog Numbers Agency Information: UL File E62622, KT3-BK Black Catalog CSA File 15364 KT3-RE Red Number Color Catalog Numbers PLK3-WH White Catalog Number Color KT4-WH White KT4-BK Black Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) 1.87 1.25 0.25 0.98 0.37 1.46 0.56 (47.63) (31.75) (6.35) (37.22) (14.22) (24.99) (9.40) 1.22 (31.04) 1.79 0.62 1.26 (45.52) (15.88) (32.23) #8 screw clearance KAD end mtg. 1.84 adapter 1.25 (46.86) (31.75) 2.34 1.25 (59.51) (31.75) 1.34 (34.04) For more information, visit www.cooperbussmann.com 310 Connectors Connectors Quick-connect Terminal Blocks NTQ23-WH BNQ21-WH BQQ41-WH Specifications Specifications Specifications Description: Description: Quick- Description: Quick-connect connect terminal Quick-connect terminal block. block. terminal block. Rating: 40A, 600V Rating: 40A, 600V Rating: 30A, 600V Center Spacing: Center Spacing: 0.390" (9.91mm) 0.437" (11.10mm) Center Spacing: 0.437" (11.10mm) Number of Poles: 3 Number of Poles: 1 Number of Poles: 1 Circuits Per Foot: 28 Circuits Per Foot: 24 Circuits Per Foot: 24 Wire Range: AWG #8-22 Cu Wire Range: AWG #8-22 Cu Wire Range: For use with quick- Screw Size: #8-32 Screw Size: #8-32 Quick Connects: 0.250” x 0.031” connect terminals only. Quick Connects: 0.250" x 0.031" Mounting Options: C-rail Quick Connects: 0.250" x 0.031" Mounting Options: Base Mount Marking Tape: MT12-1-2 Mounting Options: Base Mount, Stackable; End Piece (Part No. BQE) Torque Rating: 18 lb-in Stackable; End Piece (Part No. BQE) is required for mounting. Mounting is required for mounting. Mounting Operating Temperature: 105°C. screws recommended every 8 circuits. screws recommended every 8 circuits. Torque Rating: 18 lb-in Catalog Numbers Operating Temperature: 105°C Catalog Operating Temperature: 105°C Agency Information: UL File E62622, Number Color Screw Size: #8-32 CSA File 15364 NTQ23-WH White Agency Information: UL File E62622, CSA File 15364 Catalog Numbers Catalog Catalog Numbers Number Color Catalog BQQ41-WH White Number Color BNQ21-WH White Dimensions - in (mm) Dimensions - in (mm) Dimensions - in (mm) #BQE #8 mtg. #BQE #8 mtg. (end mtg. adaptor) screw (end mtg. adaptor) screw 1.25 (31.75) ( 1.25 (31.75) B B A A 0.56 0.56 (14.28) (14.28) 1.47 1.31 1.47 (37.33) (33.32) (37.33) 1.25 1.41 1.41 (31.75) (35.81) (35.81) For more information, visit www.cooperbussmann.com 311 Connectors Double Row Terminal Blocks Series TB100 Specifications Description: Double row terminal blocks. Rating: 30A, 300V* Center Spacing: 0.375” or 3/8” (9.52mm) TB100-08 Wire Range: #14 - 22 AWG Cu Screw Size: #6-32 philslot screws Torque Rating: 9 lb-in. Distance Between Barriers: 0.30” (7.62mm) Mounting: #6 screws Operating Temperature: 130°C (266°F) max., -40°C (-40°F) min. TB100-04SP Materials: Molded base: Black, UL rated 94V0 thermoplastic Terminal plating: Tin over brass; Screws: Zinc-plated steel Breakdown Voltage: 3600V Agency Information: UL File E62622/CSA File 47235; IEC Compliance; CE Certified * Max rating shown; some options may be rated lower, consult Cooper Bussmann. Dimensions - in Poles A B Poles A B Poles A B 02 1.40 1.12 14 5.90 5.62 26 10.40 10.12 TB100- in (mm) 03 1.78 1.50 15 6.28 6.00 27 10.78 10.50 04 2.16 1.88 16 6.66 6.38 28 11.16 10.88 05 2.53 2.25 17 7.03 6.75 29 11.53 11.25 06 2.90 2.62 18 7.40 7.12 30 11.90 11.62 A 07 3.28 3.00 19 7.78 7.50 31 12.28 12.00 08 3.66 3.38 20 8.16 7.88 32 12.66 12.38 0.14 0.14 B 09 4.03 3.75 21 8.53 8.25 33 13.03 12.75 (3.5) (3.5) 10 4.40 4.12 22 8.90 8.62 34 13.40 13.12 11 4.78 4.50 23 9.28 9.00 35 13.78 13.50 0.88 0.31 (7.9) 12 5.16 4.88 24 9.66 9.38 36 14.16 13.88 (22.3) 13 5.53 5.25 25 10.03 9.75 1” = 25.4mm. 0.375 0.30 0.17 dia. (9.5) (7.6) (4.3) 0.41 0.25 (6.3) (10.4) Catalog Number Build-A-Code Series Poles Screw Options Marking/Cover Hardware Options TB100 — 02 to 36 Blank = Steel philslot, zinc-plated L1 to L6 Marking Strips (See page 318) QC1 to QC20 = Quick connects 00 = Screws shipped bulk Special Markings (See page 318) J101 = Flat slip-on jumper (2 position only) B = Brass philslot, nickel-plated Covers (See page 318) 0J2 = Over barrier jumpers BS = Brass Sems philslot, nickel-plated 0J4 = Over barrier jumpers SP = Steel Sems philslot, zinc-plated P = Steel Sems (P-style) ST = Stainless steel, philslot STR = Stainless steel, phillips (recess) For more information, visit www.cooperbussmann.com 312 Connectors Connectors Double Row Terminal Blocks Screw Options B BS SP P ST STR Brass Philslot Brass SEMS Steel SEMS Steel (SEMS) Stainless Steel Stainless Steel Nickel-Plated Philslot Nickel-Plated Philslot Zinc-Plated (P-Style) Philslot Phillips (recess) Hardware Options Quick Connects – Assembled: Terminals 0.187” x 0.020”. Maximum current rating 13 amps. For other orientations, contact Cooper Bussmann. QC1 QC2 QC3 QC4 QC5 QC6 QC7 QC8 QC9 QC10 QC11 QC12 QC13 QC14 QC15 QC16 QC17 QC18 QC19 QC20 Quick Connects – Bulk: minimum order per part number – 100 pieces. QC101 QC102 QC103 Flat – none QC 45° – none QC 90° – none QC104 QC105 QC106 QC107 QC108 QC109 Flat – Flat Flat – QC 45° Flat – QC 90°QC 45° – QC 45° QC 45° – QC 90°QC 90° – QC 90° Jumpers – Bulk: minimum order per part number – 100 pieces. Contact Cooper Bussmann for jumper assembly. J101 OJ2 OJ4 Flat slip-on Slip-on over barrier Closed over barrier For more information, visit www.cooperbussmann.com 313 Connectors Double Row Terminal Blocks Series TB200 & TB200HB Specifications Description: Double row terminal blocks. Ratings: Volts: — 300V* (TB200) TB200-10SP — 600V* (TB200HB) Amps: — 30A* Center Spacing: 0.437” or 7/16” (11.10mm) Wire Range: #12 - 22 AWG Cu Screw Size: #6-32 philslot screws Torque Rating: 9 lb-in. Distance Between Barriers: 0.353” (8.97mm) Mounting: #6 screws TB200HB-06 Operating Temperature: 130°C (266°F) max., -40°C (-40°F) min. TB200 - in (mm) Materials: Molded base: Black, UL rated 94V0 thermoplastic A Terminal plating: Tin over brass; Screws: zinc-plated steel 0.16 0.16 B Breakdown Voltage: 4800V (4.0) (4.0) Agency Information: UL File E62622, CSA File 47235 & 1.12 0.44 (11.2) (28.4) 15364; IEC Compliance; CE Certified * Max rating shown; some options may be rated lower - consult factory. 0.437 0.353 (11.1) (8.9) Dimensions - in 0.17 dia. (4.3) Poles A B Poles A B Poles A B 0.56 02 1.63 1.31 12 6.00 5.68 22 10.37 10.06 .31 (7.8) (14.2) 03 2.07 1.75 13 6.44 6.12 23 10.81 10.50 04 2.51 2.18 14 6.87 6.56 24 11.25 10.93 05 2.94 2.62 15 7.31 7.00 25 11.68 11.37 TB200HB 06 3.38 3.06 16 7.75 7.43 26 12.12 11.81 07 3.82 3.50 17 8.19 7.87 27 12.56 12.25 A 08 4.25 3.93 18 8.62 8.31 28 13.00 12.68 09 4.69 4.37 19 9.06 8.75 29 13.44 13.12 0.16 0.16 B 10 5.13 4.81 20 9.50 9.18 30 13.87 13.56 (4.0) (4.0) 11 5.57 5.25 21 9.94 9.62 1” = 25.4mm. 0.90 1.37 0.44 (11.2) (22.8) (34.8) 0.437 0.353 0.17 x 0.22 slots (11.1) (8.9) 0.17 dia. (4.3 x 5.6) (4.3) 0.75 (19.0) 0.33 (8.4) Catalog Number Build-A-Code Series Poles Screw Options Marking/Cover Hardware Options TB — 02 to 30 Blank = Steel philslot, zinc-plated L1 to L6 Marking Strips (See page 318) QC1 to QC20 = Quick connects 200 = Standard 00 = Screws shipped bulk Special Markings (See page 318) J201 = Flat slip-on jumper (2 position only) 200HB = High barrier B = Brass philslot, nickel-plated Covers (See page 318) 0J3 = Over barrier jumpers BS = Brass Sems philslot, nickel-plated 0J5 = Over barrier jumpers SP = Steel Sems philslot, zinc-plated 0J7 = Over barrier jumpers P = Steel Sems (P-style) ST = Stainless steel, philslot SS = Stainless steel Sems, philslot STR = Stainless steel, phillips (recess) For more information, visit www.cooperbussmann.com 314 Connectors Connectors Double Row Terminal Blocks Screw Options B BS SP P ST SS STR Brass Philslot Brass SEMS Steel SEMS Steel SEMS Stainless Steel Stainless Steel Stainless Steel Nickel-Plated Philslot Nickel-Plated Philslot Zinc-Plated (P-Style) Philslot SEMS Philslot Phillips (recess) Hardware Options Quick Connects – Assembled: Terminals 0.25” x 0.031”. Maximum current rating 20 amps. For other orientations, contact Cooper Bussmann. QC1 QC2 QC3 QC4 QC5 QC6 QC7 QC8 QC9 QC11 QC10 QC12 QC13 QC14 QC15 QC16 QC17 QC18 QC19 QC20 Quick Connects – Bulk: minimum order per part no. – 100 pieces. QC201/J QC202/J QC203/J QC 45° – none Flat – none QC 90° – none QC204/J QC205/J QC206/J QC207/J QC208/J QC209/J Flat – Flat Flat – QC 45° Flat – QC 90° QC 45° – QC 45° QC 45° – QC 90° QC 90° – QC 90° Jumpers – Bulk: minimum. order per part no. – 100 pieces. Contact Cooper Bussmann for jumper assembly. J201/J OJ3/J OJ5/J OJ7/J Flat slip-on Slip-on over Closed over Closed over (not available on TB200HB) barrier for TB200HB barrier for TB200HB barrier for TB200 For more information, visit www.cooperbussmann.com 315 Connectors Double Row Terminal Blocks Series TB300 & TB345 Specifications Description: Double row terminal blocks. Ratings: TB300-08 Volts: — 600V* Amps: — 30A* (TB300) — 45A (TB345) Center Spacing: 0.562” or 9/16” (14.28mm) Wire Range: #8 - 22 AWG Cu Screw Size: TB300 – #8-32 philslot screws TB345 – #10-32 philslot screws Torque Rating: #8 screws - 16 lb-in. ; TB345-06SP #10 screws - 20 lb-in. Distance Between Barriers: 0.41” (10.5mm) Mounting: TB300 – #8 screws; TB345 – #10 screws Operating Temperature: 130°C (266°F) max., -40°C (-40°F) min. Material: Molded base: Black, UL rated 94V0 thermoplastic Terminal plating: Tin over brass; Screws: zinc-plated steel TB300 & TB345 - in (mm) Breakdown Voltage: 7500V Agency Information: UL File E62622, CSA File 47235; IEC 8-32 binding head screw - TB 300 10-32 binding head screw - TB 345 Compliance; CE Certified A * Max rating shown; some options may be rated lower - consult Cooper Bussmann. 0.22 B (5.6) Dimensions - in Poles A B Poles A B Poles A B 02 2.13 1.69 10 6.62 6.19 18 11.12 10.68 0.90 1.33 0.50 (12.7) (22.8) (33.8) 03 2.69 2.25 11 7.18 6.75 19 11.68 11.25 04 3.25 2.81 12 7.75 7.31 20 12.24 11.81 05 3.81 3.37 13 8.31 7.87 21 12.80 12.37 0.56 06 4.37 3.94 14 8.87 8.44 22 13.37 12.93 0.21 x 0.25 slots (14.2) 0.412 0.56 (5.3 x 6.3) 07 4.94 4.50 15 9.43 9.00 23 13.93 13.50 (10.4) (14.2) .21dia. 08 5.50 5.06 16 9.99 9.56 24 14.49 14.06 (5.3) 09 6.06 5.62 17 10.56 10.12 1” = 25.4mm. 0.81 (20.5) 0.33 (8.4) Catalog Number Build-A-Code Series Poles Screw Options Marking/Cover Hardware Options TB — 300 = 8-32 screw 02 to 24 Blank = Steel philslot, zinc-plated L1 to L6 Marking Strips (pg 318) QC1 to QC20 = Quick connects (TB300 only) 345 = 10-32 screw 00 = Screws shipped bulk Special Markings (pg 318) J301 = Flat slip-on jumper B = Brass philslot, nickel-plated Covers (pg 318) 0J6 = Over barrier jumper BS = Brass Sems philslot, nickel-plated 0J11 = Over barrier jumper (TB300 only) SP = Steel Sems philslot, zinc-plated P = Steel Sems (P-style) ST = Stainless steel, philslot STR = Stainless steel, phillips (recess) For more information, visit www.cooperbussmann.com 316 Connectors Connectors Double Row Terminal Blocks Screw Options B BS SP P ST STR Brass Philslot Brass SEMS Steel SEMS Steel SEMS Stainless Steel Stainless Steel Nickel-Plated Philslot Nickel-Plated Philslot Zinc-Plated (P-Style) Philslot Phillips (recess) Hardware Options Quick Connects – Assembled: TB300 only. Terminals 0.25” x 0.031”. Maximum current rating 20 amps. For other orientations, contact Cooper Bussmann. QC1 QC2 QC3 QC4 QC5 QC6 QC7 QC8 QC9 QC10 QC11 QC12 QC13 QC14 QC15 QC16 QC17 QC18 QC19 QC20 Quick Connects – Bulk: (*TB300 only) minimum order per part number. – 100 pieces. QC201 QC202 QC203 Flat – none QC 45° – none QC 90° – none QC204 QC205 QC206 QC207 QC208 QC209 Flat – Flat Flat – QC 45° Flat – QC 90° QC 45° – QC 45° QC 45° – QC 90° QC 90° – QC 90° Jumpers – Bulk: minimum order per part number – 100 pieces. Contact Cooper Bussmann for jumper assembly. J301 OJ6 OJ11 Flat slip-on(TB300 only) Closed over barrier Slip-on over barrier For more information, visit www.cooperbussmann.com 317 MB 1 2 3 Connectors Marking Options and Covers for Double Row Series Standard Marking Standard markings are applied directly to the side(s) of a 1 2 3 3 2 1 block. Standard color is white. Standard height is 0.125 inches (3.17mm). L1 L2 L3 Note: Blocks marked on both sides require a different code for each side. Example Style L1 on one side of the block requires Style L2 on the other side to ensure common terminal marking. To order, add appropriate suffix (L1, L2, L3, L4, L5 and/or L6) to block catalog number in the proper L4 L5 L6 sequence. Special Marking RED MAS BLK 3AC K TER Special markings are available at an additional charge for 3 G BLU preparation. Production charges for setup, handling and marking are the same as for standard marking. Drawing(s) OUT 300V must be submitted to ensure accuracy of part required. GND 134 PUT M MAX Consult Cooper Bussmann for price and delivery. Note: Marking is not available on TB400 Series Covers Covers prevent personnel, screws and foreign items from contacting live terminals. Available in white or clear plastic. Two cover clips supplied with each cover. Cover width is 1.31 inches (33.3mm). All covers must be ordered separately. Consult Cooper Bussmann for special legends. Example: 10 position cover, white, TB100 Series, no legends = Catalog Number X12010. Catalog Number Build-A-Code Cover Clips – Bulk Series Cover Strip Poles High Barrier Option Only Part Number X DD1-J – TB100 Series DD2-J – TB200 Series 120 - TB100/white 02 to 36 (TB100) HB = High Barrier DD2HB-J –TB200HB Series 119 - TB100/clear 02 to 30 (TB200/TB200HB) DD3-J – TB300 Series 220 - TB200/TB200HB - white 02 to 24 (TB300/TB345) Example: 10 position cover, white, 219 - TB200/TB200HB - clear TB100 Series, no legends . . . 320 - TB300 & TB345 - white Part number is X12010. 319 - TB300 & TB345 - clear Note: Covers are not available on TB400 Series. For more information, visit www.cooperbussmann.com 318 INPUT 20A 134 4 1 2 3 A 5 3 2 1 1 2 3 Connectors Connectors Top & Bottom Marking Strips for Double Row Terminal Blocks Top Marker Strips Top mounting marker strips are available in white (opaque) plastic. Two cover clips are supplied with each marker strip. All top marker strips must be ordered separately. Consult factory for special legends. Example: 12 position cover, TB200, 0.032” x 0.312”, with no legends = Catalog Number X20312. Example: 12 position cover, TB200HB, 0.06” x 0.50”, with no legends = Catalog Number X23312HB. Catalog Number Build-A-Code Series Top Marker Strip Poles High Barrier Option Only X 133 - TB100 (0.060 thk x 0.500 w) 02 to 36 (TB100) HB = High Barrier 103 - TB100 (0.032 thk x 0.312 w) 02 to 30 (TB200/TB200HB) 233 - TB200 (0.060 thk x 0.500 w) 02 to 24 (TB300/TB345) 233TB - TB200HB (0.060 thk x 0.500 w) Example: 12 position cover, TB200HB, 203 - TB200 (0.032 thk x 0.312 w) 0.060˝ x 0.500˝, with no legends... 203HB - TB200HB (0.032 thk x 0.312 w) Part No. is X23312HB. 333 - TB300 & TB345 (0.060 thk x 0.500 w) 303 - TB300 & TB345 (0.032 thk x 0.380 w) Note: Marking Strips are not available on TB400 Series Bottom Marker Strips Bottom mounting marker strips are made of black PVC, 0.030” thick. Space is available to handle most marking situations. All marker strips must be ordered separately. To order, specify part number, required legends and (BF) bottom forward, (BR) bottom reverse, (TF) top forward, or (TR) top reverse. Consult factory for specials. Example: 13 position strip, TB100 with no legends, space for marking one side = Catalog Number X10513. Space for marking one side Space for marking two sides Position for legends (one side, two sides) can be specified standard. Standard legend height is 0.125”. Standard leg-ends are 0-99 and A-Z. Special legends are available on Dimensions (in) special order. Drawing(s) must be submitted to ensure Dim. TB100 TB200 TB200HB TB300 TB345 TB400 accuracy of part required. A 1.13 1.37 1.62 1.58 1.58 N/A B 1.38 1.62 1.81 1.81 1.81 N/A Catalog Number Build-A-Code Series Bottom Marker Strip Poles High Barrier Option Only Orientation X 105 = TB100/marking one side 02 to 36 (TB100) HB = High Barrier BF = Bottom forward 101 = TB100/marking both sides 02 to 30 (TB200/TB200HB) BR = Bottom reverse 205 = TB200/marking one side 02 to 24 (TB300/TB345) TF = Top forward 201 = TB200/marking both sides TR = Top reverse 295 = TB200HB/marking one side 291 = TB200HB/marking both sides 305 = TB300 & TB345/marking one side 301 = TB300 & TB345/marking both sides Note: Marking Strips are not available on TB400 Series. For more information, visit www.cooperbussmann.com 319 Connectors Double Row Terminal Blocks Series TB400 Specifications Description: Double row terminal blocks. Ratings: Volts: — 600V Amps: — 75A Center Spacing: 0.687” or 11/16” (17.45mm) Wire Range: #6-14 AWG Cu Screw Size: #10-32 philslot screws TB400-05 Torque Rating: 20 lb-in. Distance Between Barriers: 0.56” (14.3mm) Mounting: #10 screws Operating Temperature: 130°C (266°F) max., -40°C (-40°F) min. Material: Molded base: Black, UL rated 94V0 thermoplastic Terminal plating: Tin over brass; Screws: zinc-plated steel TB400 - in (mm) Breakdown Voltage: 7500V Agency Information: UL File E62622, CSA File 47235; IEC A Compliance; CE Certified B 0.22 (5.6) Dimensions - in 0.15 dia. Poles A B Poles A B Poles A B (3.8) 02 2.51 2.06 06 5.26 4.81 10 8.01 7.56 0.625 1.12 03 3.20 2.75 07 5.95 5.50 11 8.70 8.25 (15.9) (28.4) 04 3.89 3.44 08 6.64 6.19 12 9.39 8.94 05 4.58 4.13 09 7.33 6.88 1” = 25.4mm. 0.22 dia. (5.6) 0.687 0.687 0.562 (17.4) (17.4) (14.3) 1.81 (46.0) 0.76 Screw Options (19.3) 0.46 (11.7) 1.34 (34.0) B ST STR Brass Philslot Stainless Steel Stainless Steel Nickel-Plated Philslot Phillips (recess) Hardware Options OJ14: Closed over barrier Catalog Number Build-A-Code Series Poles Screw Options Marking Hardware Options TB400 – 02 to 12 Blank = Steel philslot, zinc-plated Not available 0J14† - Jumper over barrier 00 = Screws shipped bulk B = Brass philslot, nickel-plated ST = Stainless steel, philslot STR = Stainless steel, phillips (recess) †Contact factory for pole configuration. For more information, visit www.cooperbussmann.com 320 Connectors Connectors Base Mount Double Row Terminal Blocks Series KU Specifications Description: Base mount double row terminal blocks. Ratings: Volts:— 600V Amps:— 60A* Center Spacing: 0.625” (15.88mm) Number of Poles: 2- to 12-poles Wire Range: #6-22 AWG Cu Screw Size: #10-32 Torque Rating: 20 lb-in. Distance Between Barriers: 0.437” (11.09mm) Mounting: Base mount Material: Molded base: Black, UL rated 94V1 Nuclear Series KU - in (mm) Grade Noryl B Terminal plating: Nickel over brass 0.62 (15.9) Operating Temperature: 105°C max. Agency Information: UL File E62622, CSA File 47235 * 60A rating achieved with #6 copper wire crimped to ring terminal. 2.00 1.50 (38.1) (50.8) Dimensions - in KU KUX Only #10 screw Poles A B A clearance 02 2.50 1.62 2.00 1.25 03 3.12 2.25 2.62 0.43 (31.8) 04 3.75 2.87 3.25 (11.1) 05 4.37 3.50 3.87 0.50 06 5.00 4.12 4.50 (12.7) 07 5.62 4.75 5.12 08 6.25 5.37 5.75 09 6.87 6.00 6.37 10 7.50 6.62 7.00 11 8.12 7.25 7.62 A 12 8.75 7.87 8.25 1” = 25.4mm. Catalog Number Build-A-Code Series Poles Screw Options Covers Marking Strip – KU = Standard block 02 to 12 00 = Screws shipped bulk WC = Top cover & MT = Matte finish KUH = Block W = Brass washer head, 2 end plates NU = Numbered 1 to 12, horizontal KUX = Short block nickel-plated NUV = Numbered 1 to 12, vertical KURL = Standard w/removable link P = Steel screw w/pressure plate PT = Marker strip for cover KUXRL = Short block w/removable link zinc-plated B = Brass washer head, no plating BP = Brass philslot, nickel-plated Catalog Number - SC Series KUSC = Standard w/shorting strap 02 to 12 00 = Screws shipped bulk WC = Top cover & PT* = Marker strip for cover & 4 shorting screws W = Brass washer head, 2 end plates KUXSC = Short block w/shorting strap nickel-plated & 4 Shorting screws P = Steel screw w/pressure plate zinc-plated B = Brass washer head, no plating BP = Brass philslot, nickel-plated *Requires WC cover option Accessories MTMU## NUM## JU12 NUE NUC## Molded Marking Tape Molded Marking Tape Jumper End Piece for NUC Cover Matte Finish 12 Circuits For more information, visit www.cooperbussmann.com 321 Connectors Standard Base Terminal Blocks Series TS — 8.0, 10.0, 12.0, 13.5mm centers Specifications Description: 8, 10, 12 and 13.5mm center, standard base terminal blocks. Construction: Mold to length polyamide type 6/6 housing, nickel-plated brass contacts and stainless steel wire protector. Ratings: Volts: — 600V Amps: — 20A (TS08) — 30A (TS10) — 35A (TS12) — 50A (TS14) E Wire Range: See Specifications Table Housing Material: Polyamide Type 6/6, 94V2 (white) C Contact Material: Nickel-Plated Brass Wire Protector: Stainless Steel Screw Size: See Specifications Table B Operating Temperature: 105°C (221°F) max., D -30°C (-22°F) min. A Torque Rating: See Specifications Table D D Agency Information: UL File E62622; CE Certified A Dimensions - in (mm) Poles TS08 TS10 TS12 TS14 1.2mm STANDOFF 2 0.622 (15.8) 0.689 (17.5) 0.815 (20.7) 0.906 (23.0) 3 0.937 (23.8) 1.083 (27.5) 1.287 (32.7) 1.437 (36.5) F F 4 1.252 (31.8) 1.476 (37.5) 1.760 (44.7) 1.969 (50.0) 5 1.567 (39.8) 1.870 (47.5) 2.232 (56.7) 2.500 (63.5) WIRE PROTECTOR 6 1.882 (47.8) 2.264 (57.5) 2.705 (68.7) 3.031 (77.0) 7 2.232 (55.8) 2.657 (67.5) 3.177 (80.7) 3.563 (90.5) 8 2.512 (63.8) 3.051 (77.5) 3.650 (92.7) 4.094 (104.0) 9 2.827 (71.8) 3.445 (87.5) 4.122 (104.7) 4.626 (117.5) 10 3.142 (79.8) 3.839 (97.5) 4.594 (116.7) 5.157 (131.0) 11 3.457 (87.8) 4.232 (107.5) 5.067 (128.7) 5.689 (144.5) 12 3.772 (95.8) 4.626 (117.5) 5.539 (140.7) 6.220 (158.0) Specifications Torque Clamping Wire Range Dimensions - in (mm) 2 Position in-lb Area (mm ) AWG (Cu) Screw BCDE F TS0801 3.5 4.0 22-12 Sol./Str. M2.6x5 0.67 (17.0) 0.57 (14.5) 0.32 (8.0) 0.11 (2.9) 0.11 (2.8±0.1) TS0802 3.5 1.5 22-12 Sol./Str M2.6x5 0.67 (17.0) 0.57 (14.5) 0.32 (8.0) 0.11 (2.9) 0.11 (2.8±0.1) TS1001 4.4 6.0 22-10 Sol., 14-10 Str. M3.0x6 0.80 (20.2) 0.67 (17.0) 0.39 (10.0) 0.14 (3.6) 0.13 (3.4±0.1) TS1002 4.4 2.5 22-12 Sol./Str, 10 Sol. M3.0x6 0.80 (20.2) 0.67 (17.0) 0.39 (10.0) 0.14 (3.6) 0.13 (3.4±0.1) TS1201 7.0 10.0 22-10 Sol./Str. M3.5x7 0.94 (23.8) 0.75 (19.0) 0.47 (12.0) 0.14 (3.9) 0.15 (4.2±0.1) TS1202 7.0 6.0 22-10 Sol./Str. M3.5x7 0.94 (23.8) 0.75 (19.0) 0.47 (12.0) 0.15 (3.9) 0.15 (4.2±0.1) TS1401 12.0 16.0 20-8 Sol./Str. M4.0x9 1.01 (25.6) 0.99 (25.2) 0.53 (13.5) 0.17 (4.4) 0.19 (5.0±0.1) TS1402 12.0 10.0 20-8 Sol./Str. M4.0x9 1.01 (25.6) 0.99 (25.2) 0.53 (13.5) 0.17 (4.4) 0.19 (5.0±0.1) Catalog Number Build-A-Code Series Base Poles TS 08 = 20A 01 = Standard 02 to 12 10 = 30A 02 = Standard w/ wire protector 12 = 35A 14 = 50A For more information, visit www.cooperbussmann.com 322 Connectors Connectors Flat Base Terminal Blocks Series TS — 8.0, 10.0mm centers Specifications Description: 8 and 10mm center, flat base terminal blocks. Construction: Mold to length polyamide type 6/6 housing, nickel-plated brass contact and stainless steel wire protector. Ratings: Volts: — 600V Amps: — 20A (TS08) — 30A (TS10) Wire Range: See Specification Table Housing Material: Polyamide Type 6/6, 94V2 (white) Contact Material: Nickel-Plated Brass Wire Protector: Stainless Steel Screw Size: See Specification Table E Operating Temperature: 105°C (221°F) max., -30°C (-22°F) min. Torque Rating: See Specification Table C Agency Information: UL File E62622; CE Certified A Dimensions - in (mm) B Poles TS08 TS10 D 2 0.622 (15.8) 0.689 (17.5) A 3 0.937 (23.8) 1.083 (27.5) 4 1.252 (31.8) 1.476 (37.5) D D 5 1.567 (39.8) 1.870 (47.5) 6 1.882 (47.8) 2.264 (57.5) 7 2.232 (55.8) 2.657 (67.5) 8 2.512 (63.8) 3.051 (77.5) 9 2.827 (71.8) 3.445 (87.5) 10 3.142 (79.8) 3.839 (97.5) 11 3.457 (87.8) 4.232 (107.5) FF 12 3.772 (95.8) 4.626 (117.5) WIRE PROTECTOR Specifications Torque Clamping Wire Range Dimensions - in (mm) Position in-lb Area (mm2) AWG (Cu) Screw BCDE F TS0803 3.5 4.0 22-12 Sol./Str. M2.6x5 0.64 (16.3) 0.53 (13.3) 0.32 (8.0) 0.11 (2.9) 0.11 (2.8±0.1) TS0804 3.5 1.5 22-12 Sol./Str M2.6x5 0.64 (16.3) 0.52 (13.3) 0.32 (8.0) 0.11 (2.9) 0.11 (2.8±0.1) TS1003 4.4 6.0 22-10 Sol., 14-10 Str. M3.0x6 0.80 (20.2) 0.62 (15.8) 0.39 (10.0) 0.14 (3.6) 0.13 (3.2±0.1) TS1004 4.4 2.5 22-12 Sol./Str., 10 Sol. M3.0x6 0.80 (20.2) 0.62 (15.8) 0.39 (10.0) 0.14 (3.6) 0.13 (3.2±0.1) Catalog Number Build-A-Code Series Base Poles TS 08 = 20A 03 = Flat 02 to 12 10 = 30A 04 = Flat w/ wire protector For more information, visit www.cooperbussmann.com 323 Connectors Raised Base Terminal Blocks Series TS - 8.0, 10.0mm centers Specifications Description: 8 and 10mm center, raised base terminal blocks. Construction: Mold to length polyamide type 6/6 housing, nickel-plated brass contacts and stainless steel wire protector. Ratings: Volts: — 600V Amps: — 20A (TS08) — 30A (TS10) Wire Range: See Table Housing Material: Polyamide Type 6/6, 94V2 (white) Note: TS Series standard base pictured above. Contact Material: Nickel-plated Brass Wire Protector: Stainless Steel Screw Size: See Table E Operating Temperature: 105°C (221°F) max., -30°C (-22°F) min. Torque Rating: See Table C Agency Information: UL File E62622; CE Certified A Dimensions D Poles TS08 TS10 B 2 0.622 (15.8) 0.689 (17.5) A 3 0.937 (23.8) 1.083 (27.5) 4 1.252 (31.8) 1.476 (37.5) D D 5 1.567 (39.8) 1.870 (47.5) 6 1.882 (47.8) 2.264 (57.5) 4.3mm 7 2.232 (55.8) 2.657 (67.5) 8 2.512 (63.8) 3.051 (77.5) 9 2.827 (71.8) 3.445 (87.5) 10 3.142 (79.8) 3.839 (97.5) 11 3.457 (87.8) 4.232 (107.5) FF 12 3.772 (95.8) 4.626 (117.5) WIRE PROTECTOR Specifications Torque Clamping Wire Range Dimensions - in (mm) 2 Position in-lb Area (mm ) AWG (Cu) Screw B C D E F TS0805 3.5 4.0 22-12 Sol./Str. M2.6x5 0.64 (16.30) 0.67 (16.90) 0.32 (8.00) 0.11 (2.90) 0.11 (2.8±0.1) TS0806 3.5 1.5 22-12 Sol./Str M2.6x5 0.64 (16.30) 0.67 (16.90) 0.32 (8.00) 0.11 (2.90) 0.11 (2.8±0.1) TS1005 4.4 6.0 22-10 Sol., 14-10 Str. M3.0x6 0.80 (20.20) 0.79 (20.10) 0.39 (10.00) 0.14 (3.60) 0.13 (3.2±0.1) TS1006 4.4 2.5 22-12 Sol./Str., 10 Sol. M3.0x6 0.80 (20.20) 0.79 (20.10) 0.39 (10.00) 0.14 (3.60) 0.13 (3.2±0.1) Catalog Number Build-A-Code Series Base Poles TS 08 = 20A 05 = Raised 02 to 12 10 = 30A 06 = Raised w/ wire protector For more information, visit www.cooperbussmann.com 324