EATON BUSSMANN MIS-3

Low Voltage Supplementary Fuses Low Voltage Supplementary Fuses RED indicates NEW information Section Contents Page Fuse Holder & Block Selection Guide ..... 44-45 Cable limiters & welder limiters K Series cable limiters . ........ 600V . ......... 46 64000 & 68000 welder limiters . . . 600V . ......... 46 13 1 ⁄32”x 1 ⁄2” Fast-acting supplementary fuses BAF ...................... 250V . ......... 47 KTK . ..................... 600V . ......... 47 KLM . ..................... 500V.......... 47 DCM . ................. 600Vac/dc . ......... 47 Solar PV . .................. .250V . .........48 13 1 ⁄32”x 1 ⁄2” Time-delay supplementary fuses FNM . ..................... 250V . ......... 49 FNQ ...................... 500V . ......... 49 13 3 ⁄32”x 1 ⁄8” Fast-acting supplementary fuses BBS . ..................... 600V . ......... 50 KTQ ...................... 600V . ......... 50 Pin indication fuses and actuator GBA ...................... 125V . ......... 51 GLD . ..................... 125V . ......... 51 MIC . ............. 250V fast-acting........... 51 MIN . ............. 250V fast-acting........... 51 FNA ..............250V time-delay .......... 51 MIS ....................... 600V . ......... 52 KAZ . ...................... 600V . ......... 52 Limiters ANN . ........... .. 125V fast-acting . ........ 52 ANL . ............. 80Vdc time-delay . ........ 52 4164 & 4164-FR . ........ .fuse blocks . ........ 52 In-line size rejecting fuses and fuse holders GLQ ...................... 300V . ......... 53 GMQ . ..................... 300V . ......... 53 In-line non-rejecting fuses and fuse holders GLR . ..................... 300V . ......... 54 GMF . ..................... 300V . ......... 54 GRF . ..................... 300V . ......... 54 Automotive blade-type fuses ATC ....................... 32Vdc . ........ 55 ATC-_ID . ................... 32Vdc . ........ 55 ATM ....................... 32Vdc . ....... 55 ATM-_ID . .................. .32Vdc . ........ 55 MAX . ..................... 32Vdc . ....... 55 MAX-_ID . .................. .32Vdc . ........ 55 Automotive blade-type fuse holders HHC, HHD, HHF, HHG, ATC-FHID for ATC fuses ....56 HHL, HHM, ATC-FHID for ATM fuses ............. 56 HHX for MAX fuses . ......................... 56 Low Voltage Supplementary Fuses Holders & Blocks for Low Voltage Supplementary Fuses Limiters Catalog Number Volts Page K Series .................... 600V ................... 46 68000 Series ................ 600V ................... 46 64000 Series ................ 600V ................... 46 ANN Fast acting limiter ......... 125Vac/80Vdc ............ 52 ANL Time-delay limiter ......... 80Vdc .................. 52 CH Series Holders Safety J™ Series Modular Type • CH Series Class J modular 1 to 3-pole, panel/DIN rail mount . .254 • Safety J™ Series modular holders, panel/DIN rail mount .....255 Blocks • Modular Type Fuse Blocks 250/600V, panel mount .........275 • H250 Series 1- to 3-pole 250V, panel mount ..............260 • H600 Series 1- to 3-pole 600V, panel mount ..............263 Blocks H250 Series J600 Series H600 Series • Modular Type Fuse Blocks 600V, panel mount ............ 275 • J600 Series, panel mount ........................... 266 • JP Series pyramid blocks, panel mount ................. 268 • BH Series modular-style open blocks, panel mount ........ 275 Limiter Blocks - ANN & ANL • Blocks for 4164 & 4164-FR ........................... 52 JP Series BH Series 4164 & 4164-FR 13 1 ⁄32”X 1 ⁄2” Fuses Catalog Number Volts Page BAF ....................... 250V ................... 47 KTK ....................... 600V ................... 47 KLM....................... 600Vac/dc ............... 47 DCM ...................... 600Vac/dc ............... 47 Solar PV.................... 250V ................... 48 FNM ...................... 250V ................... 49 OPM-1038R & OPM-NG-SC3 CH Series FNQ ....................... 500V ................... 49 OPM-1038RSW Holders • OPM-NG-SC3 3-pole, panel/DIN rail mount ...............252 • OPM-1038R 3-pole, panel/DIN rail mount ................251 • OPM-1038RSW 3-pole w/ switch, panel/DIN rail mount .....250 • CH Series Global 1- to 3-pole, DIN rail mount ............. .259 HPG HPM • HPG Panel mount fuse holder ........................ .286 HPC-D • HPC-D Panel mount fuse holder .......................287 • HPM Panel mount fuse holder ........................ 287 • HPS Series Panel mount fuse holder ...................286 • HPF Series Panel mount fuse holder ....................286 • HEB Series 1-Pole in-line fuse holder ...................279 HPS HEB Series HPF • HEX & HEY Series 2-Pole in-line fuse holders .............279 • NDNF1-WH Fuse holding rail mount terminal block ........ 291 Blocks • BM Series, panel/DIN rail with adapters ................. 274 • 3723, 3742 and 3743 multi-pole add-on fuse blocks ....... 290 HEX & HEY NDNF1-WH BM Series Series For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 44 Low Voltage Supplementary Fuses Low Voltage Supplementary Fuses Holders & Blocks for Low Voltage Supplementary Fuses 13 3 ⁄32”X 1 ⁄8” Fuses Catalog Numbers Volts Page BBS ........................... 600V ...............50 KTQ ........................... 600V ...............50 Holder • HPS-L Panel mount holder ...........................286 HPS-L BM Series Blocks • BM Series, panel/DIN rail with adapters ................. .274 • 3723, 3742 and 3743 multi-pole add-on fuse blocks ........290 Pin Indicating Fuses 1 1 ⁄4”X 1 ⁄4” Fuse Catalog Numbers Volts Page 1 1 GBA ⁄4" X 1 ⁄4" .................... .125V ...............51 HLD 1 1 GLD ⁄4" X 1 ⁄4" .................... .125V ...............51 13 1 MIC ⁄32" X 1 ⁄2" ................... .250V ...............51 13 1 MIN ⁄32" X 1 ⁄2" ................... .250V ...............51 13 1 FNA ⁄32" X 1 ⁄2" ................... .250V ...............51 13 MIS ⁄32" X 2" ..................... 600V ...............52 13 KAZ ⁄32" X 2" ..................... 600V ...............52 HK Series Holders 1 1 • ⁄4" X 1 ⁄4": HLD Panel mount visual indication ............ .285 1 1 • ⁄4" X 1 ⁄4": HK Series Panel mount lamp indicating ......... .285 Blocks 1 1 • ⁄4" X 1 ⁄4": Series 8000 for visual indication .............. .288 13 1 • ⁄32" X 1 ⁄2": 1-Pole signal block cat. # 3839 (not shown in catalog)* 13 • ⁄32" X 2": 1-Pole signal block cat. # 2778 (not shown in catalog)* Series 8000 13 • ⁄32" X 2": 2-Pole signal block cat. # 2837 (not shown in catalog)* 13 • ⁄32" X 2": 3-Pole signal block cat. # 2838 (not shown in catalog)* *Call our customer satisfaction team at 636-527-3877 for more information. Automotive Blade-type Fuses Catalog Numbers Volts Page ATC ............................ 32Vdc .............. 55 ATM ........................... 32Vdc .............. 55 MAX ........................... 32Vdc .............. 55 Holders • ATC: HHC, HHD, HHF, HHG & ATC-FHID In-line holders ...... 56 • ATM: HHL, HHM & ATC-FHID In-line holders .............. 56 • MAX: HHX In-line holders ............................ 56 HHC, HHD, HHF & HHG HHL & HHM HHX In-Line Rejecting and Non-Rejecting Fuses Catalog Number Volts Page GLQ rejecting fuse ................. 300V ...............53 GMQ rejecting fuse ................ 300V ...............53 GLR non-rejecting fuse ............. 300V ...............54 GMF non-rejecting fuse ............. 300V ...............54 GRF non-rejecting fuse ............. 300V ...............54 Holders • GLQ & GMQ: HLQ Rejection holder ..................... 53 • GLR, GMF & GRF: HLR & HLR-2A non-rejection holders ......54 3 HLQ Fuse Holders HLR Fuse Holder For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 45 Low Voltage Supplementary Fuses Cable Limiters & Welder Limiters K Series 64000 & 68000 Series Specifications Specifications Description: Cable limiters. Description: Welder limiters. Ratings: Ratings: Volts — 600Vac Volts — 600Vac (or less) IR — 200,000A RMS Sym. IR — 200,000A RMS Sym. @ 600Vac Agency Information: UL Features and Benefits Listing: KDM, KDR, KDP and • Current-limiting devices designed specially for use KFM, KCM, KCM-B and KCR. on welder circuits only • Time-current characteristics are designed to hold Features and Benefits on the intermittent overloading encountered in • Sizes and ratings available to welder operation, while providing short-circuit meet many applications. protection to the circuit and equipment • Welder limiters have excess current capacity in the Typical Applications operating range as needed for this type of service • Protecting low voltage distribution and service entrance cables against short-circuit currents. Typical Applications Catalog Numbers • Welder circuits Copper Cable Limiter — 600 Volts Catalog Cable Catalog Cable • Because welder limiters have special characteristics, they Number Size Number Size are not intended for application on general-use circuits Tubular Terminals KCY #4 KCF 4/0 Catalog Numbers KCZ #3 KCH 250 MCM Catalog Fuse Holder Nominal 1, 2 KCA #2 KCJ 350 MCM Numbers Type Amp Rating 1, 2, 3 1 KCB #1 KCM , KCM-B 500 MCM KCC 1/0 KCV 600 MCM 68150 Class H 150 1, 2 1, 2 KCD 2/0 KCR 750 MCM 68200 Class H 200 KCE 3/0 KCS 1000 MCM 68300 Class H 300 Tubular Terminal and Offset Bolt-Type Terminal 1 68400 Class H 400 KQV #12 KDD 2/0 KQT #10 KDE 3/0 68600 Class H 600 KFZ #8 KDF 4/0 64200 Class J 200 KIG #6 KDH 250 MCM 1, 2 KDY #4 KDJ 350 MCM 64300 Class J 300 1 2 3 KDA #2 KDM , , 500 MCM KDB #1 KDU 600 MCM 64400 Class J 400 1 2 KDC 1/0 KDR , 750 MCM 64600 Class J 600 Compression Connector Rod and Tubular Terminals KEX 4/0 KQO 350 MCM 2 KFH-A 250 MCM KDT 500 MCM *Center Bolt-Type Terminal and Off-Set Bolt-Type Terminal 1 KPF 4/0 KDP 500 MCM 1 1 KFT 250 MCM KFM 750 MCM 1 KEW 350 MCM *Copper or aluminum cable; sizes of all other limiters pertain to copper only. 1 UL Listed (File E90818). 2 Available with shrink tube “_V” suffix. 3 Available with molded rubber boots. Add “–B” to end of part number. Accessories Boots can be purchased separately. For KCM Boot-KCM For KDM Boot-KDM Installation tools can be purchased separately from Thomas and Betts • Crimp Tool: TBM-14M • Die: 15506 KDM/15515 KDR Recommended Fuse Blocks For 68000 & 64000 Series limiters • See page 44 Data Sheet: 1045 Data Sheet: 1042 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 46 Low Voltage Supplementary Fuses Low Voltage Supplementary Fuses 13 1 ⁄32”x 1 ⁄2” Fast-acting Fuses BAF KTK DCM & KLM Specifications Specifications Class: Supplemental Class: Specifications Supplemental Description: Fast- Class: Supplemental acting supplementary Description: Description: Fast-acting fuse. Full range, supplementary fuse. 13 fast-acting, DC Dimensions: ⁄32”x 13 1 Dimensions: ⁄32”x 1 ⁄2” 1 midget fuse. 1 ⁄2” (10.3 x 38.1mm). (10.3 x 38.1mm). Dimensions: Ratings: Ratings: 13 1 ⁄32”x 1 ⁄2” Volts — 600Vac (or Volts — 250Vac (or less) (10.3 X 38.1mm). less) 2 Amps — ⁄10-30A 1 Ratings: Amps — ⁄10-30A 2 IR — 10kA @ 125Vac ( ⁄10-30A) Volts — 600Vac/dc IR — 100kA RMS Sym. (UL) 2 — 35A ( ⁄10-1A @ 250Vac) 1 Amps — ⁄10-30A Agency Information: CE, Std. 248-14, 1 — 100A (1 ⁄2-3A @ 250Vac) UL Listed, Guide JDYX, File E19180. IR — 100kA AC — 200A (4-10A @ 250Vac) — 50kA DC Features and Benefits — 750A (12A- 15A @ 250Vac) Agency Information: CE, UL Listed: • Low cost supplemental protection of 600V — 200A (20-30A @ 250Vac) STD. 248-14, (FILE #E19180, GUIDE or less non-inductive circuits. #JDYX), CSA Certified, C22.2 NO. Agency Information: CE, Std. 248-14, • Upgrade with LP-CC product to reduce 248. 14 (CLASS #1422-01, FILE UL 0-15/250V, Guide JDYX, File E19180 SKU investment and minimize potential CSA Certified, 0-15/250V, Class #53787). arc-flash hazards. 1422-01, File 53787. Features and Benefits Typical Applications • Full range, fast-acting, 600Vac/dc Features and Benefits • Control Circuits midget fuse. • Low cost supplemental protection of • Lighting Circuit Protection • Minimum interrupting rating or 200% 125V and 250V non-inductive circuits. • Meter Circuits rated current at 600Vdc. • Upgrade with LP-CC product to reduce Catalog Numbers (Amps) SKU investment and minimize potential 600Vac - UL Listed and CSA Typical Applications arc-flash hazards. (and minimize 1 3 KTK- ⁄10 KTK- ⁄4 KTK-4 KTK-12 KTK-50* • DC Control Circuits Requiring potential for misapplying fuse.) 1 KTK- ⁄8 KTK-1 KTK-5 KTK-15 Fast-Acting Fuses. 2 1 KTK- ⁄10 KTK-1- ⁄4 KTK-6 KTK-20 Typical Applications • Solar power energy sources. 1 1 KTK- ⁄4 KTK-1- ⁄2 KTK-7 KTK-25 • General Purpose Circuits 3 1 KTK- ⁄10 KTK-2 KTK-7- ⁄2 KTK-30 • Lighting Circuit Protection Catalog Numbers (Amps) - DCM 4 1 KTK- ⁄10 KTK-2- ⁄2 KTK-8 KTK-35* 1 DCM- ⁄10 DCM-1 DCM-5 DCM-15 • Meter Circuits 1 KTK- ⁄2 KTK-3 KTK-9 KTK-40* 1 1 DCM- ⁄8 DCM-1- ⁄4 DCM-6 DCM-20 6 1 KTK- ⁄10 KTK-3- ⁄2 KTK-10 KTK-45* 2 1 DCM- ⁄10 DCM-1- ⁄2 DCM-7 DCM-25 Catalog Numbers (Amps) 2 *Rated for no more than 24A continuous. 1 BAF- ⁄10 BAF-2 BAF-8 DCM- ⁄4 DCM-2 DCM-8 DCM-30 1 1 BAF- ⁄4 BAF-2- ⁄2 BAF-9 3 1 DCM- ⁄10 DCM-2- ⁄2 DCM-9 1 BAF- ⁄2 BAF-3 BAF-10 1 DCM- ⁄2 DCM-3 DCM-10 6 BAF- ⁄10 BAF-4 BAF-12 3 DCM- ⁄4 DCM-4 DCM-12 8 BAF- ⁄10 BAF-5 BAF-15 Catalog Numbers (Amps) - KLM BAF-1 BAF-6 BAF-20 1 3 KLM- ⁄10 KLM- ⁄4 KLM-5 KLM-20 1 1 BAF-1- ⁄2 BAF-6- ⁄4 BAF-25 1 KLM- ⁄8 KLM-1 KLM-6 KLM-25 8 BAF-1- ⁄10 BAF-7 BAF-30 2 1 KLM- ⁄10 KLM-1- ⁄2 KLM-8 KLM-30 *All have interrupting rating of 10,000A at 125V. 1 KLM- ⁄4 KLM-2 KLM-10 For superior electrical protection, Cooper Bussmann For superior electrical protection, Cooper Bussmann 3 KLM- ⁄10 KLM-3 KLM-12 recommends upgrading BAF and fuse applications to recommends upgrading KTK fuse applications to 1 KLM- ⁄2 KLM-4 KLM-15 Low-Peak LP-CC fuses See page 17. Low-Peak LP-CC fuses See page 17. Data Sheet: 2011 (0-30) Data Sheet: 1011 Data Sheet: DCM 2038 KLM 2020 13 1 Recommended fuse blocks/fuse holders for ⁄32”x 1 ⁄2” fuses • See page 44 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 47 Low Voltage Supplementary Fuses Fuses for Solar Panel Applications Dimensions - (mm) PV Specifications Class: gPV Description: A range of fuses specifically designed for the protection and isolation of photovoltaic strings. 13 1 Dimensions: ⁄32”x 1 ⁄2” (10.3 x 38.1mm). Ratings: Volts — 1000Vdc Amps — 1-15A IR — 33kAdc IR (Min) — 1.3 x I n Agency Information: UL Pending, CE, IEC 60269. Features and Benefits • Capable of interrupting low over currents associated with faulted PV strings. • High DC voltage rating. • Variety of mounting options for flexibility. Catalog Numbers (Amps) PV-1A10F PV-3A10F PV-5A10F PV-8A10F PV-12A10F PV-2A10F PV-4A10F PV-6A10F PV-10A10F PV-15A10F For bolt-on tabs, replace ‘F’ with ‘-T’ For PCB mounting, replace ‘F’ with ‘-1P’ or ‘-2P’ Time-Current Characteristic Curves—Average Melt Data Sheet: 720110 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 48 Low Voltage Supplementary Fuses Low Voltage Supplementary Fuses 13 1 ⁄32”x 1 ⁄2” Time-delay Fuses FNM FNQ Specifications Specifications Class: Supplemental Class: Supplemental Description: Time-delay supplementary Description: Time-delay fuse. supplementary fuse. 13 1 13 1 Dimensions: ⁄32”x 1 ⁄2” (10.3 x 38.1mm). Dimensions: ⁄32”x 1 ⁄2” (10.3 x 38.1mm). Ratings: Volts — 500Vac (or less) Ratings: 1 Volts — 250Vac (or less) Amps — ⁄10-30A 1 Amps — ⁄10-30A IR — 10kA RMS Sym. 1 IR — 35A ( ⁄10-1A @ 250Vac) Agency Information: CE, Std. 248-14, UL Listed, Guide 1 1 JDYX, File E19180 CSA Certified, Class 1422-01, File — 100A (1 ⁄8-3 ⁄2A @ 250Vac) 53787. — 200A (4-10A @ 250Vac) 1 — 10kA ( ⁄10-10A @ 125Vac) Features and Benefits • Low cost supplemental protection of transformers and relays — 10kA (12-30A @ 250Vac) at 500V or less. Agency Information: CE, Std. 248-14, UL Listed, 0-30/250Vac; File E19180, Guide JDYX, CSA Certified, Typical Applications 1-30/250Vac; Class 1422-01, File 53787. • Control Transformer 480V Primary Protection • Lighting Circuit Protection Features and Benefits • Meter Circuits • Low cost supplemental protection of 125V and 250V inductive circuits. Catalog Numbers (Amps) 1 4 1 1 Typical Applications FNQ- ⁄10 FNQ- ⁄10 FNQ-1- ⁄2 FNQ-3- ⁄2 FNQ-7 FNQ-20 1 1 6 • General Purpose Circuits FNQ- ⁄8 FNQ- ⁄2 FNQ-1- ⁄10 FNQ-4 FNQ-8 FNQ-25 15 6 1 • Lighting Circuit Protection FNQ- ⁄100 FNQ- ⁄10 FNQ-2 FNQ-4- ⁄2 FNQ-9 FNQ-30 3 8 1 • Meter Circuits FNQ- ⁄16 FNQ- ⁄10 FNQ-2- ⁄4 FNQ-5 FNQ-10 2 1 6 • Upgrading to LP-CC product will reduce SKU investment FNQ- ⁄10 FNQ-1 FNQ-2- ⁄2 FNQ-5- ⁄10 FNQ-12 1 1 and minimize potential for misapplying fuse. FNQ- ⁄4 FNQ-1- ⁄8 FNQ-3 FNQ-6 FNQ-14 3 1 2 1 FNQ- ⁄10 FNQ-1- ⁄4 FNQ-3- ⁄10 FNQ-6- ⁄4 FNQ-15 Catalog Numbers (Amps) 1 1 1 FNM- ⁄10 FNM- ⁄2 FNM-1- ⁄2 FNM-3 FNM-6 FNM-15 1 6 6 2 1 FNM- ⁄8 FNM- ⁄10 FNM-1- ⁄10 FNM-3- ⁄10 FNM-6- ⁄4 FNM-20 15 3 8 1 FNM- ⁄100 FNM- ⁄4 FNM-1- ⁄10 FNM-3- ⁄2 FNM-7 FNM-25 2 FNM- ⁄10 FNM-1 FNM-2 FNM-4 FNM-8 FNM-30 1 1 1 1 FNM- ⁄4 FNM-1- ⁄8 FNM-2- ⁄4 FNM-4- ⁄2 FNM-9 3 1 1 FNM- ⁄10 FNM-1- ⁄4 FNM-2- ⁄2 FNM-5 FNM-10 4 4 8 6 FNM- ⁄10 FNM-1- ⁄10 FNM-2- ⁄10 FNM-5- ⁄10 FNM-12 For superior electrical protection, Cooper Bussmann recommends upgrading FNM and FNQ fuse applications to Low-Peak LP-CC fuses See page 17. Recommended fuse blocks and fuse holders for 13 1 ⁄32”x 1 ⁄2” fuses • See page 44 Data Sheet: 2028 Data Sheet: 1012 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 49 Low Voltage Supplementary Fuses 13 3 ⁄32”x 1 ⁄8” Fast-acting Fuses BBS KTQ Specifications Specifications Class: Supplemental Class: Supplemental Description: Fast-acting Description: Fast-acting supplementary fuse. supplementary fuse. 13 3 13 3 Dimensions: ⁄32”x 1 ⁄8” Dimensions: ⁄32”x 1 ⁄8” (10.3 x 34.9mm). (10.3 x 34.9mm). Construction: Fiber cartridge. Construction: Fiber cartridge. Ratings: Ratings: 1 Volts — 600Vac ( ⁄10-5A) Volts — 600Vac — 250Vac (6 - 10A) Amps — 1-6A — 48Vac (12-30A) IR — 10kA RMS Sym. 1 Amps — ⁄10-30A Agency Information: CE, Std. 248-14, UL Recognized, 4-6A, Guide JDYX2, File E19180. IR — 10kA RMS Sym. Agency Information: CE, Std. 248-14, UL Listed, Features and Benefits 0-5A/600V, Guide JDYX, File E19180, CSA Certified, • Low cost supplemental protection of non-inductive circuits 0-5A/600V, Class 1422-01, File 53787. • Rated for application in circuits at 600V or less. • Reduced interchangeability with other supplemental fuses Features and Benefits minimizes misapplication • Low cost supplemental protection of non-inductive circuits • Reduced interchangeability with other supplemental fuses Typical Applications minimizes misapplication • Control Circuits • Lighting Ballasts Typical Applications • Meter Circuits • Control Circuits • Lighting Ballasts Catalog Numbers (Amps) (600Vac) • Meter Circuits KTQ-1 KTQ-3 KTQ-6 6 KTQ-1- ⁄10 KTQ-4 Catalog Numbers (Amps) 1 8 KTQ-2 KTQ-5 BBS- ⁄10 BBS- ⁄10 BBS-4 BBS-15 2 BBS- ⁄10 BBS-1 BBS-5 BBS-20 1 1 BBS- ⁄4 BBS-1- ⁄2 BBS-6 BBS-25 4 6 BBS- ⁄10 BBS-1- ⁄10 BBS-7 BBS-30 1 8 BBS- ⁄2 BBS-1- ⁄10 BBS-8 6 BBS- ⁄10 BBS-2 BBS-10 3 BBS- ⁄4 BBS-3 BBS-12 13 3 ⁄32”x 1 ⁄8” fuses Recommended fuse blocks/fuse holders for • Page 45 Data Sheet: 2045 Data Sheet: 2010 (0-30A) For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 50 Low Voltage Supplementary Fuses Low Voltage Supplementary Fuses Pin Indication Fuses GBA MIC & MIN FNA GLD Specifications Specifications Class: Supplemental Class: Supplemental Specifications Description: Fast- Class: Supplemental Description: Time-delay, acting, pin indication pin indication fuse. Description: Fast-acting, pin fuse. 13 1 indication fuse. Dimensions: ⁄32”x 1 ⁄2” Dimensions: 1 1 (10.3 x 38.1mm). Dimensions: ⁄4”x 1 ⁄4” 13 1 ⁄32”x 1 ⁄2” (10.3 x (6.6 x 31.7mm) 3AG. Ratings: 38.1mm) 5AG. 1 8 Volts — 250Vac ( ⁄10- ⁄10A) Ratings: Ratings: — 125Vac (1-15A) Volts — See Agency Info Volts — 250Vac below — 32V (20-30A) (1-15A) 1 1 Amps — ⁄2-15A Amps — ⁄10-30A — 32V (20-30A) 1 8 IR — See Agency Info below IR — 35A ( ⁄10- ⁄10A @ 250Vac) Amps — 1-30A 1 Agency Information: CE, Std. 248- — 10kA ( ⁄10-15A @ 125Vac) IR — 35A (1A @250Vac) 14, UL Listed, 0-5A/125Vac, 10,000 — 1kA (20-30A @ 32V) AIC, Guide JDYX, File E19180, UL — 100A (2-3A @250Vac) Agency Information: CE, Std. 248- Recognized, 6A/125Vac, 1000AIC — 200A (5-10A @250Vac) 1 8 14, UL Listed ⁄10- ⁄10A, IR 35A@ 250V, 8-15A/50Vac/dc, 300 AIC Guide — 750A (15A @250Vac) IR 10kA@ 125V , 1-15A, IR 10kA@ JDYX2, File E19180, CSA Certified: 125V, Guide JDYX, File 19180, CSA — 10kA (20-30A @32V) 0-5A/125Vac, 10,000 AIC Class 8 Certified, 0- ⁄10A/250V, 1-10A/125V, — 35A (1A @250Vac) 1422-01, File 53787. Class 1422-01, File 53787. Agency Information: CE, Std. 248-14, Features and Benefits MIC—0-15A UL Listed, 125Vac/10kA IR Features and Benefits • Type GBA has a “red” pin indicator Guide JDYX, File E19180, MIN—1-5A • FNA has a pin indicator providing providing visual identification of CSA Certified, Class 1422-01, File visual identification of failed circuits, failed circuits, resulting in faster 53787. resulting in reduced circuit downtime. troubleshooting (reduced circuit • Time-delay response allows close downtime). Features and Benefits sizing on control transformers and • Type GLD has a plated pin to • Type MIN has a “red” pin indicator relays activate transmitting a electrical providing visual identification of failed signal to indicate the location of circuits, resulting in faster trouble Typical Applications opened circuits, resulting in reduced shooting (reduced circuit downtime). • Control Circuits downtime. • Type MIC has silver-plated pin • Electronic Circuits transmitting an electrical signal indicating Typical Applications location of a failed circuit, resulting in Catalog Numbers (Amps) • Control Circuits 1 8 1 1 faster troubleshooting (reduced circuit FNA- ⁄10 FNA- ⁄10 FNA-2- ⁄2 FNA-6- ⁄4 • Electronic Circuits 1 8 FNA- ⁄8 FNA-1 FNA-2- ⁄10 FNA-7 downtime). 15 1 FNA- ⁄100 FNA-1- ⁄8 FNA-3 FNA-8 2 1 2 GLD Catalog Numbers (Amps) Typical Applications FNA- ⁄10 FNA-1- ⁄4 FNA-3- ⁄10 FNA-9 1 GLD- ⁄2 GLD-2 GLD-6 1 4 1 FNA- ⁄4 FNA-1- ⁄10 FNA-3- ⁄2 FNA-10 • Control Circuits 3 GLD- ⁄4 GLD-3 GLD-10 3 1 FNA- ⁄10 FNA-1- ⁄2 FNA-4 FNA-12* • PLC Circuits 4 6 1 GLD-1 GLD-4 GLD-12 FNA- ⁄10 FNA-1- ⁄10 FNA-4- ⁄2 FNA-15* • Electronic Circuits 1 1 8 GLD-1- ⁄2 GLD-5 GLD-15 FNA- ⁄2 FNA-1- ⁄10 FNA-5 FNA-20* MIC Catalog Numbers (Amps) 6 6 FNA- ⁄10 FNA-2 FNA-5- ⁄10 FNA-25* MIC-1 MIC-5 MIC-20 3 1 FNA- ⁄4 FNA-2- ⁄4 FNA-6 FNA-30 GBA Catalog Numbers (Amps) MIC-2 MIC-10 MIC-25 1 GBA- ⁄2 GBA-2 GBA-8 *12-30A versions are dual-tube construction MIC-3 MIC-15 MIC-30 3 GBA- ⁄4 GBA-3 GBA-10 GBA-1 GBA-4 GBA-15 MIN Catalog Numbers (Amps) 1 GBA-1- ⁄2 GBA-5 MIN-1 MIN-5 MIN-20 MIN-2 MIN-10 MIN-25 MIN-3 MIN-15 MIN-30 Recommended fuse blocks/fuse Recommended signal block for Recommended signal block for 1 1 13 1 holders for ⁄4”x 1 ⁄4” indicating fuses 13 1 ⁄32”x 1 ⁄2” indicating fuses ⁄32”x 1 ⁄2” indicating fuses • Page 45 • Page 45 • Page 45 Data Sheet: 2012 Data Sheet: 2029 Data Sheet: 2047 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 51 Low Voltage Supplementary Fuses Pin Indication Fuse and Actuator, and Limiters ANN & ANL Limiters MIS KAZ Specifications Specifications Specifications Description: Circuit limiters. Class: Supplemental Description: Non-Fuse actuator. ANN: Very fast-acting limiter. Description: Non time- 13 delay pin indication fuse. Dimensions: ⁄32”x 2” ANL: Time-delay limiter. 13 (10.3 x 50.8mm). 7 3 Dimensions: ⁄32”x 2” Dimensions: ⁄8”x 3 ⁄16” (10.3 x 50.8mm). Ratings: (22.2 x 81.0mm). Ratings: Volts — 600Vac Ratings: Volts — 600Vac Amps — N/A ANN: Amps — 1-12A IR — 200kA Volts — 125Vac IR — 200kA Agency Information: CE, — 80Vdc UL Listed, Guide JDVS, File Features and Benefits Amps — 10-800A E58836. • Type MIS has a pin indica- IR — 2500A @ 125Vac tor providing visual identifi- Features and Benefits — 2700A @ 80Vdc cation of failed circuits, • Bussmann signal blocks 2778, ANL: resulting in 2837 or 2838 with KAZ actu- Volts — 80Vdc faster troubleshooting ators mounted in parallel with (reduced Amps — 35-750A fuses having a rating of 50A or larger circuit downtime). IR — 2700A @ 80Vdc to provide blown fuse dropout of shunt- • Type MIS can be used in circuits trip fused — 6000A @ 32Vdc rated 600V or less. switches. Agency Information: • Type MIS has an interrupting • Type KAZ can be used in circuits rated ANN: 35-400A @ 125Vac, IR=2500A rating of 200kA. 600V or less. and 500A @ 80Vdc, IR=2700A: UL • Type KAZ has an interrupting rating of Typical Applications Recognized Guide JFHR2, File 200kA. • 480V Control Circuits E56412; CSA Certified Class 1422-30, • PLC Circuits File 53787, CE for 35-400A. Typical Applications ANL: UL Recognized, CSA Certified, • Large, Shunt-Trip Fused Switches Catalog Numbers (Amps) 35-750A @ 80Vdc, IR = 2700A, Guide • Fuse Protected Circuits Rated 50A or MIS-1 MIS-4 MIS-10 JFHR2, File E56412, Class 1422-30, Larger With Shunt-Trip Devices. MIS-2 MIS-5 MIS-12 File 53787, SAE J1171. MIS-3 MIS-8 Catalog Number: KAZ Features and Benefits Test Specifications • Fast-acting circuit protection (ANN). Fuse Load Opening Time • Time-delay sizing for inductive circuits All 110% 0 4 hrs. (min.) (ANL). 1-5A 150% 0 6 min. (max.) • Small footprint saves space. 6-12A 150% 12 min. (max.) Recommended signal block for • Window shows limiter status. 13 ⁄32” x 2” indicating fuses Typical Applications Recommended signal block for • Page 45 13 • Fork lifts, Marine, Aviation ⁄32” x 2” indicating fuses Data Sheet: 2021 • Page 45 ANN Catalog Numbers (Amps) ANN-10 ANN-90 ANN-225 ANN-400 4164 & 4164-FR Limiter Blocks ANN-35 ANN-100 ANN-250 ANN-500 ANN-40 ANN-125 ANN-275 ANN-600 Specifications ANN-50 ANN-150 ANN-300 ANN-700 Description: Limiter fuse blocks for ANL ANN-60 ANN-175 ANN-325 ANN-800 & ANN. ANN-80 ANN-200 ANN-350 Ratings: • 4164 furnished with nylon inserted locknuts Volts — 125Vac ANL Catalog Numbers (Amps) • 4164-FR furnished with standard hex nuts ANL-35 ANL-125 ANL-250 ANL-500 — 80Vdc Dimensions: Length: 3.38˝ ANL-40 ANL-130 ANL-275 ANL-600 Width: 0.95˝ ANL-50 ANL-150 ANL-300 ANL-675 Amps — 10-800A Height: 1.62˝ ANL-60 ANL-175 ANL-325 ANL-750 Poles: 1 - stud terminal ANL-80 ANL-200 ANL-350 Studs center to center: 2.43˝ ANL-100 ANL-225 ANL-400 Data Sheets: 2023 (ANN), 2024 (ANL) For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 52 Low Voltage Supplementary Fuses Low Voltage Supplementary Fuses In-line Size Rejecting Fuses and Fuse Holders GLQ GMQ Specifications Specifications Class: Supplemental Class: Supplemental Description: Fast-acting, Description: Time-delay, size-rejecting in-line fuse. size-rejecting in-line fuse. Construction: Glass tube. Construction: Ceramic tube. Ratings: Ratings: Volts — 300Vac (or less) Volts — 300Vac (or less) Amps — 1-10A 1 1 Amps — ⁄2-6 ⁄4A IR — 10kA IR — 10kA Agency Information: CE, Std. 248-14, UL Listed (Guide Agency Information: CE, Std. 248-14, UL Listed (Guide JDYX, File E19180), CSA Certified, (Class 1422-01, JDYX, File E19180), CSA Certified, (Class 1422-01, File File 53787). 53787) Features and Benefits • In-Line, fast-acting circuit protection. Features and Benefits • Rejection feature prevents overfusing. • In-line, fast-acting circuit protection. • Rejection feature prevents overfusing. Typical Applications • In-line Lighting Ballast Protection Typical Applications • In-Line Lighting Ballast Protection Catalog Numbers (Amps) and Rejection Holders 1, 2 1, 2 Fuse Holder Fuse Holder Catalog Numbers (Amps) and Rejection Holders 6 2 GLQ-1 HLQ-1- ⁄10 GLQ-3 HLQ-3- ⁄10 3, 4 3, 4 Fuse Holders Fuse Holders 1 6 GLQ-1- ⁄2 HLQ-1- ⁄10 GLQ-4 HLQ-5 1 1 1 2 GMQ- ⁄2 HLQ- ⁄2 GMQ-2- ⁄2 HLQ-3- ⁄10 6 6 GLQ-1- ⁄10 HLQ-1- ⁄10 GLQ-5 HLQ-5 6 6 2 GMQ- ⁄10 HLQ-1- ⁄10 GMQ-3 HLQ-3- ⁄10 2 GLQ-2 HLQ-3- ⁄10 GLQ-9 HLQ-10 8 6 2 2 GMQ- ⁄10 HLQ-1- ⁄10 GMQ-3- ⁄10 HLQ-3- ⁄10 1 2 GLQ-2- ⁄2 HLQ-3 - ⁄10 GLQ-10 HLQ-10 6 GMQ-1 HLQ-1- ⁄10 GMQ-4 HLQ-5 1 6 1) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class 6225-01, File 47235 GMQ-1- ⁄4 HLQ-1- ⁄10 GMQ-6 HLQ-8 10A, 300Vac. 6 6 1 GMQ-1- ⁄10 HLQ-1- ⁄10 GMQ-6- ⁄4 2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A-104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness 0.043”to 0.062” or #4909 2 GMQ-2 HLQ-3- ⁄10 for thickness 0.030” to 0.042”. 3) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class 6225-01, File 47235 • Do not put tension on line (rear) terminal of fuse holder. 10A, 300Vac. 4) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A-104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness 0.043”to 0.062” or #4909 for thickness 0.030” to 0.042” • Do not put tension on line (rear) terminal of fuse holder. Data Sheet: 2033 Data Sheet: 2030 3 HLQ Fuse Holders for both GLQ & GMQ fuses. For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 53 Low Voltage Supplementary Fuses In-line Non-rejecting Fuses and Fuse Holders GLR GMF Specifications GRF Class: Supplemental Specifications Description: Fast-acting, Class: Supplemental non-rejection, in-line fuse. Description: Time-delay, Construction: Glass tube. non-rejection, in-line fuse. Ratings: Construction: Glass tube. Volts — 300Vac (or less) Ratings: 3 Amps — ⁄16-15A Volts — 300Vac (or less) IR — 10kA 3 Amps — ⁄10-10A Agency Information: CE, Std. 248-14, UL Listed, 0- IR — 10kA 15A/300Vac (Guide JDYX, File E19180), CSA Certified, Agency Information: CE, Std. 248-14 0-10A, UL Listed 0-10A/300V (Class 1422-01, File 53787). (Guide JDYX, File E19180), CSA Certified, (Class 1422-01, Features and Benefits File 53787). • In-line, fast-acting circuit protection. Features and Benefits Typical Applications • In-line, time-delay circuits protection. • In-Line Lighting Ballast Protection Typical Applications • In-Line Lighting Ballast Protection Catalog Numbers (Amps) and Non-Rejection Holders 1, 2* 1, 2* Fuse Holder Fuse Holder 1 Catalog Numbers (-Amps) and Non-Rejection Holders GLR- ⁄2 HLR GLR-6 HLR 3, 4* 3, 4* GLR-1 HLR GLR-7 HLR Fuse Holder Fuse Holder 1 3 GLR-1- ⁄2 HLR GLR-8 HLR GMF- ⁄10 HLR GMF-3 HLR 6 1 2 GLR-1- ⁄10 HLR GLR-9 HLR GMF- ⁄2 HLR GMF-3- ⁄10 HLR 6 GLR-2 HLR GLR-10 HLR GMF- ⁄10 HLR GMF-4 HLR 8 GLR-3 HLR GLR-12 HLR GMF- ⁄10 HLR GMF-5 HLR 1 GLR-4 HLR GLR-15 HLR-2A GMF-1 HLR GMF-6- ⁄4 HLR 1 GLR-5 HLR GMF-1- ⁄4 HLR GMF-10 HLR 6 GMF-1- ⁄10 HLR GRF-7 HLR 1) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class 6225-01, File 47235 12A, 300Vac. GMF-2 HLR GRF-8 HLR 2) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A- 1 GMF-2- ⁄2 HLR GRF-10 HLR 104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness 8 GMF-2- ⁄10 HLR 0.043”to 0.062” or #4909 for thickness 0.030” to 0.042”. 3) Carrier is UL Recognized, Guide IZLT2, File E14853 and CSA Certified, Class 6225-01, File 47235 * For two leads (one each for line and loadside) order HLR-2A, 12A, 300Vac. 15A, 300V 4) Units can be panel-mounted either in a knockout hole with a separate steel clip (BK/A-104) or in a keyhole punch using separate mounting clip #6374 for panels of thickness 0.043”to 0.062” or #4909 • An alternative to the HLR fuse holder is the A fuse holder. The A fuse holder comes for thickness 0.030” to 0.042”. WITHOUT leads. The customer inserts #18 insulated solid copper wire into the line side receptacle as well as into the load side receptacle. It has the same body dimensions, *For two leads order HLR-2A, 15A, 300V utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A fuse holder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA • An alternative to the HLR fuse holder is the A fuse holder. The A fuse holder comes WITHOUT leads. Certified, 10A, 300Vac, Class 6225-01, File 47235. The customer inserts #18 insulated solid copper wire into the line side receptacle as well as into the • Do not put tension on line (rear) terminal of fuse holder. load side receptacle. It has the same body dimensions, utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A fuse holder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA Certified, 10A, 300Vac, Class 6225-01, File 47235. • Do not put tension on line (rear) terminal of fuse holder. Data Sheet: 2032 Data Sheet: 2031 HLR-2A Fuse Holder HLR Fuse Holder For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 54 Low Voltage Supplementary Fuses Low Voltage Supplementary Fuses Automotive Blade-type Fuses ® ® ATC fuse ATM Fuse MAX Maxi–Fuse Available Available Available With With With Indication Indication Indication (Actual Size) (Actual Size) (Actual Size) Specifications Specifications Specifications Description: Fast-acting Description: Fast-acting blade fuse. Description: Fast-acting blade fuse. blade fuse. Construction: Colored plastic housing Construction: Colored plastic housing Construction: Colored plastic with zinc fuse element. with zinc fuse element. housing with zinc fuse element. Ratings: Ratings: Ratings: Volts — 32Vdc Volts — 32Vdc Volts — 32Vdc Amps — 2-30A Amps — 20-80A Amps — 1-40A IR — 1000A IR — 1000A IR — 1000A Features and Benefits Features and Benefits Agency Information: UL • Color coded plastic housing for easy • Color coded plastic housing for easy Recognized, (3-40A) (Guide identification of fuse ratings identification of fuse ratings JFHR2, File E56412), SAE Typical Applications Typical Applications Standard J1284. • Automotive • Automotive Features and Benefits Catalog Numbers (Amps) Catalog Numbers (Amps) • Color coded plastic housing for easy identification of fuse ratings Catalog No. Part No. Typical Applications Non-Indicating Indicating Color Non-Indicating Indicating Low-Profile Color • Automotive MAX-20 MAX-20ID Yellow ATM-2 Gray MAX-25 Gray ATM-3 ATM-3ID Violet Catalog Numbers (Amps) MAX-30 MAX-30ID Green ATM-4 Pink MAX-35 Brown Catalog No. ATM-5 ATM-5ID ATM-5LP Tan MAX-40 MAX-40ID Orange Non-Indicating Indicating Color 1 1 1 ATM-7- /2 ATM-7- /2ID ATM-7- /2LP Brown MAX-50 MAX-50ID Red ATC-1 Black ATM-10 ATM-10ID ATM-10LP Red MAX-60 MAX-60ID Blue ATC-2 Gray ATM-15 ATM-15ID ATM-15LP Blue MAX-70 MAX-70ID Tan ATM-20 ATM-20ID ATM-20LP Yellow ATC-3 ATC-3ID Violet MAX-80 MAX-80ID Clear ATM-25 ATM-25ID ATM-25LP Clear ATC-4 Pink MAX-100ID Purple ATM-30 ATM-30ID ATM-30LP Green ATC-5 ATC-5ID Tan ATC-7-1/2 ATC-7-1/2ID Brown ATC-10 ATC-10ID Red ATC-15 ATC-15ID Blue ATC-20 ATC-20ID Yellow ATC-25 ATC-25ID Clear ATC-30 ATC-30ID Green ATC-35 ATC-35ID Blue-Green ATC-40 ATC-40ID Orange Recommended in-line fuse holder for Recommended in-line fuse holder for Recommended in-line fuse holder blade type fuses blade type fuses for blade type fuses • Page 56 • Page 56 • Page 56 Data Sheet: 2048 Data Sheet: 2049 Data Sheet: 2009 For product data sheets, visit www.cooperbussmann.com/products/datasheet.asp 55 Low Voltage Supplementary Fuses Automotive Blade-type Fuse Holders HHC, HHD, HHF, HHG & HHL, HHM & ATM-FHID HHX ATC-FHID LED Indicator LED Indicator easy ID™ LED Indicating Holder easy ID™ LED Indicating Holder Specifications Specifications Specifications Description: In-line fuse holders for ® Description: In-line fuse holders for Description: In-line fuse holders for MAXI Fuses. ® ATC Blade-Type fuses. ATM Fuses. Ratings: Dimensions: See Dimensions Ratings: Volts: — 32Vdc illustration. Volts: — 32Vdc Amps: — 80% continuous of fuse rat- Ratings: Amps: — 80% continuous of fuse ing. See Catalog Numbers Volts: — 32Vdc rating. See Catalog Numbers table for individual fuses table for individual fuses Amps:— 80% continuous of fuse sizes. sizes. rating. See Catalog Numbers Catalog Numbers table for individual fuses sizes. Catalog Numbers Catalog Fuse Holder Fuse Electrical Numbers Description Amps Connection Catalog Fuse Holder Fuse Electrical Numbers Description Amps Connection HHX Black w/ cover 20-60 #6 red leadwire, Catalog Numbers HHL Black w/ cover 2-20 #16 black leadwire, 5” with blunt ends Catalog Fuse Holder Fuse Electrical 1 Numbers Description Amps Connection 4” length stripped to /4” HHX-B Black – body only 20-60 #6 red leadwire, HHC Yellow 1-20 #16 black leadwire HHL-B Black – body only 2-20 #16 black leadwire, 5” with blunt ends 1 HHD Black 1-30 #12 yellow leadwire 4” length stripped to /4” HHX-C Black cover only — — HHD-C HHD Cover only — Clear polycarbonate HHM Black w/ cover 2-30 #12 red leadwire, A fuse must be properly and fully inserted into the holder to 1 HHF Black w/ cover 1-20 #16 yellow leadwire 4” length stripped to /4” provide a solid connection. Poor or improper insertion of the HHG Black w/ cover 1-30 #12 yellow leadwire HHM-B Black – body only 2-30 #12 red leadwire, fuse can result in failure of the fuse and holder, thus not 1 Indicating Holder 4” length stripped to /4” protecting the device for which it was intended. ATC-FHID 1-20 #16 black leadwire Black w/ cover HHM-C Black - cover only — — Dimensions - in Indicating Holder ATM-FHID 1-20 #16 black leadwire Black w/ cover Bulk Products (Quantity - 1000 Pieces) Catalog Fuse Holder Fuse Electrical 3.35" Bulk Products (Quantity - 1000 Pieces) Numbers Description Amps Connection Catalog Fuse Holder Fuse Electrical BK/HHC-R Yellow 1-20 #16 red leadwire Numbers Description Amps Connection 6.70" 6.70" BK/HHF-B Black w/ cover 1-20 #16 black leadwire BK/HHL-R Black – w/cover 2-20 #16 red leadwire, 1 4” length stripped to /4” A fuse must be properly and fully inserted into the holder to 1.37" provide a solid connection. Poor or improper insertion of the BK/HHL-B Black – body only 2-20 #16 black leadwire, fuse can result in failure of the fuse and holder, thus not 1 4” length stripped to /4” .265" DIA. HOLE protecting the device for which it was intended. A fuse must be properly and fully inserted into the holder to provide a solid connection. Poor or improper insertion of the HHC & HHD Dimensions - in fuse can result in failure of the fuse and holder, thus not protecting the device for which it was intended. 0.78" 0.364" HHL & HHM Dimensions - in 1.56" 0.91" 0.5" .59" 0.30" .25" .25" 0.38" .41" 4.75" 4.75" 0.25" + + 4.0" 0.25" 1.125" 4.0" 0.25" Data Sheet: 2128 Data Sheet: 2107 Data Sheet: 2129 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 56