EATON BUSSMANN MP2-100-R

Effective October 2017 Technical Data 4108 Supersedes March 2007 MP2 MICRO-PAC™ Low profile toroid power inductors Applications • PC cards, • mobile phones • Disk drives • GPS systems Environmental data • Storage temperature range (component): SMD Device -40 °C to +125 °C • Operating temperature range: -40 °C to +125 °C (ambient plus self-temperature rise) Product features • Solder reflow temperature: • High performance, ferrite-based, low J-STD-020 (latest revision) compliant profile,surface mount inductors • Small footprint and closed magnetic field construction allow for low EMI • Low DCR and high efficiency • Ferrite core material Discontinued, Effective July 25, 2016 or until inventory is depleted. Please review MP2A data sheet (4112) and SD18 data sheet (PM-4311) as alternate replacements. MP2 Technical Data 4108 Effective October 2017 MICRO-PAC™ Low profile toroid power inductors Product specifications Part Inductance OCL (1) Irms (2) Isat (3) DCR (4) Q (5) SRF Number μH μH ± 20% Amperes Amperes Ohms (Typ.) MHz (Typ.) (Typ.) (Max.) (Typ.) MP2-R47-R 0.47 0.40 2.02 3.40 0.075 10 300 MP2-1R0-R 1.0 1.02 1.67 2.10 0.103 20 160 MP2-1R5-R 1.5 1.59 1.51 1.70 0.118 25 155 MP2-2R2-R 2.2 2.29 1.39 1.40 0.130 32 150 MP2-3R3-R 3.3 3.58 1.25 1.10 0.156 42 140 MP2-4R7-R 4.7 4.60 1.18 1.00 0.180 46 130 MP2-6R8-R 6.8 7.02 1.06 0.80 0.202 46 110 MP2-100-R 10.0 9.95 0.98 0.68 0.240 55 100 MP2-150-R 15.0 15.30 0.88 0.54 0.300 65 60 MP2-220-R 22.0 21.80 0.80 0.45 0.360 65 45 MP2-330-R 33.0 33.70 0.64 0.37 0.556 65 35 MP2-470-R 47.0 46.40 0.52 0.31 0.833 65 28 4) Values @ 20° C 1) Open Circuit Inductance Test Parameters: 100kHz, 0.250 Vrms, 0.0 Adc 2) RMS current, delta temp. of 40° C ambient temperature of 85° C 5) Measured @ 300KHz 3) Peak current for approximately 30% roll-off Dimensions- mm 1.05 5.2 max. yww 7.50 1.8 max. 5.88 5.40 max 7.50 xxx 2.00 yww = Date Code xxx = Inductance value per family chart Do not route traces or vias underneath the inductor Inductance characteristics OCL vs. Isat 120 100 80 60 40 20 0 0 40 40 80 1 40 % of Isat www.eaton.com/electronics 2 Discontinued, Effective July 25, 2016 or until inventory is depleted. Please review MP2A data sheet (4112) and SD18 data sheet (PM-4311) as alternate replacements. % of (OCL) MP2 Technical Data 4108 MICRO-PAC™ Low profile toroid power inductors Effective October 2017 Solder Reflow Profile TP Table 1 - Standard SnPb Solder (T ) Table 1 - Standard SnPb Solder (T ) T -5°C c c C t Max. Ramp Up Rate = 3°C/s P Volume Volume Max. Ramp Down Rate = 6°C/s 3 3 Package mm mm _ Thickness <350 >350 T L <2.5mm 235°C 220°C Preheat t A _ >2.5mm 220°C 220°C T smax T Taabbllee 2 2 - - L Leeaadd ((P Pbb)) F Fr reeee S So ollddeer r ((T T )) c c Volume Volume Volume T smin 3 3 3 t s Package mm mm mm Thickness <350 350 - 2000 >2000 <1.6mm 260°C 260°C 260°C 1.6 – 2.5mm 260°C 250°C 245°C >2.5mm 250°C 245°C 245°C 25°C Time 25°C to Peak Time Reference JDEC J-STD-020 Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and Soak Temperature min. (T ) 100°C 150°C smin T emperature max. (T ) 150°C 200°C smax Time (T to T ) (t ) 60-120 Seconds 60-120 Seconds smin smax s Average ramp up rate T to T 3°C/ Second Max. 3°C/ Second Max. smax p Liquidous temperature (TL) 183°C 217°C Time at liquidous (t ) 60-150 Seconds 60-150 Seconds L Peak package body temperature (T )* Table 1 Table 2 P Time (t )** within 5 °C of the specified classification temperature (T ) 20 Seconds** 30 Seconds** p c Average ramp-down rate (T to T ) 6°C/ Second Max. 6°C/ Second Max. p smax Time 25°C to Peak Temperature 6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (T ) is defined as a supplier minimum and a user maximum. p ** Tolerance for time at peak profile temperature (t ) is defined as a supplier minimum and a user maximum. p Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Compan . Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant inju y to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton Eaton is a registered trademark. All Rights Reserved Printed in USA All other trademarks are property Publication No. 4108 of their respective owners. October 2017 Discontinued, Effective July 25, 2016 or until inventory is depleted. Please review MP2A data sheet (4112) and SD18 data sheet (PM-4311) as alternate replacements. Temperature