EATON BUSSMANN OPM-CC

® Bussmann OPTIMA™ OPM-CC Overcurrent Protection Module Physical Characteristics: ® • Holds Buss LP-CC or other Buss Class CC fuses. • Small size matches 45mm IEC starter width. • Rated for #18 - #10 gauge wire, both stranded and solid, and a variety of dual wire combinations. • 3 pole version. • Phil/slot screws. • Pressure plate terminations. Current-Limitation: • The Class CC fuse affords a high degree of current-limitation. • Provides Type 2 protection for motor starters (when used ® with properly sized LOW-PEAK Class CC fuses Catalog Symbol: OPM-CC from Bussmann). Ampere Rating: 30A or less Voltage Rating: 600 Volts AC (or less)* Safety Features: Interrupting Rating: 200,000A RMS • Rejection of non-Class CC fuses. Agency Approvals: • Blown fuse indicators. UL Listed, UL512, Guide IZLT, File E14853 • Safety handle. CSA Certified, C22.2 No. 39, Class 6225-01, File 47235 • Finger safe terminals. Housing and Module: • Removable module for convenient fuse loading. UL Recognized high performance thermoplastic. • 35mm Din-rail or screw mount. Flammability: 94 VO • Dead-front construction. No exposed contacts *Contact Bussmann for DC ratings. with module installed. • Padlockable. Millimeters (± 0.38) Dimensional Data Inches (± 0.015) 53.9 40.7 2.1 1.6 13.5 .5 44.7 24.6 1.8 .97 14.5 .6 36.5 1.4 93.9 3.7 97.8 59.9 3.9 44.7 2.4 1.8 25.9 1.0 38.8 1.5 114.0 88.1 88.1 4.5 3.5 3.5 98.4 44.7 3.9 1.8 111.3 CE logo denotes compliance with European Union Low Voltage Directive 4.4 (50-1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. Form No. OPM-CC Page 1 of 2 5-21-03 SB03129 Data Sheet: 1100 OBSOLETE RECOMMENDED SUBSTITUTE OPM-1038R Series (Data Sheet: 1102) or OPM-NG Series (Data Sheet: 1109) ® Bussmann OPTIMA™ OPM-CC Overcurrent Protection Module Spare Fuseholder for Class CC fuses. Part No. 5TPH 75.57 2.98" 26.16 1.03" SPARE FUSE DOUBLE SIDED HOLDER BODY ADHESIVE TAPE 15.88 .63" Available only in bulk quantities. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. OPM-CC Page 2 of 2 5-21-03 SB03129 Data Sheet: 1100