EATON BUSSMANN PDBFS204

Maximize Short-Circuit Current Rating While Improving Safety UL Listed, Finger-Safe Enclosed Power Distribution Blocks Offer High SCCR ® New 2008 NEC and UL 508A SCCR marking requirements state that the following equipment must be marked with an assembly SCCR: • Industrial Control Panels [409.110] • Industrial Machinery Electrical Panels [670.3(A)] • Certain HVAC Equipment [440.4(B)] This SCCR is based on the lowest-rated component, or weakest link, in the assembly. Unmarked power distribution blocks will default ® to a rating of 10kA. The new Cooper Bussmann enclosed Series PDBFS offers both high SCCR and enhanced shock protection. • UL Listing Meets Requirements Eliminating Investigation and Procedures Listed to UL 1953 for minimum spacing requirements of at least 1˝ through air and 2˝ over surface as required for UL 508A industrial control panel feeder applications. See back page. • High SCCR Up to 200kA rating enables the power distribution block to be one of the highest rated devices in the panel. This helps achieve a high assembly SCCR. • Enclosed for Enhanced Electrical Safety Safer work conditions. Finger-safe and IP20 under specific conditions. • Modular, Space Saving Design Gangable for flexible multi-pole installations, plus small footprint for tight spacing. • Simple and Fast Installation DIN rail mount or panel mount, (See datasheet 1049). Captive terminal screws are backed out at the factory. • Meets Wireway Requirements ® Series PDBFS can be used to meet the new 2008 NEC 376.56(B) requirement, which requires listed PDBs and no exposed live parts with or without wireway cover installed. Cooper Bussmann UL Listed PDBs With High SCCRs Features/Benefits UL Listed 1953 vs. UL Recognized 1059 • UL Listed 1953. File E256146 Listed products require simply checking to ensure that the • CSA Certified, Class 6228-01, File 15364 product is used in accordance with its listing and labeling. • 600Vac/dc (UL1953), 690Vac/dc (IEC) However, for recognized products, such as power terminal • SCCR up to 200kA, see table for details blocks, the “Conditions of Acceptability” must be • Single-pole, gang for multiple pole applications with investigated to ensure the product is suitable for the accessory part 2A1279 interlocking dovetail specific application, and then the procedure description • Datasheet #1049 located at www.cooperbussmann.com must be documented in the manufacturer’s procedure for the assembly. Series PDBFS Terminal Copper Conductor Capability Short-Circuit Current Rating Data Line Load Configuration Conductors Max Fuse Class & Amp** Catalog Number Openings per Pole Line Load J T RK1 RK5 Amps Wire Range Wire Range SCCR (All Single AWG or AWG or LPJ JJS LPS-RK FRS-R Pole) Line Load kcmil kcmil JJN LPN-RK FRN-R 2/0 - 8 AWG 2/0 - 8 AWG PDBFS204 175A 2/0 - 8 2/0 - 8 200 200 100 60 200kA 2 2 70 - 10 mm 70 - 10 mm † † 4 - 12 200 200 100 60 200kA 2/0 - 8 AWG 4 - 14 AWG † † † † PDBFS220 175A 2/0 - 8 175 175 100 60 100kA 2 2 70 - 10 mm 25 - 2.5 mm #14 † † † † 200 200 100 60 50kA 350kcmil - 6 AWG 350kcmil - 6 AWG PDBFS303 310A 350 - 6 350 - 6 400 400 200 100 200kA 2 2 185 - 16 mm 185 - 16 mm † † 2 - 6 400 400 200 100 200kA 500kcmil - 6 AWG 2 - 14 AWG † † † † PDBFS330 380A 500 - 6 200 200 100 30 50kA 2 2 8 - 14 240 - 16 mm 35 - 2.5 mm † † † † 175 175 100 30 100kA † † 300 4 - 8 600 600 400 200 200kA 300kcmil - 4 AWG 4 - 14 AWG † † † † PDBFS377 570A 4 600 600 400 200 50kA 2 2 250 - 4 150 - 12 mm 25 - 2.5 mm † † † † 6 - 14 200 200 100 30 50kA 350 350 600 600 400 200 200kA 350kcmil - 4 AWG 350kcmil - 4 AWG PDBFS500 620A 2 2 185 - 12 mm 185 - 12 mm 300 - 4 300 - 4 600 800 600 200 100kA 600 800* 600 400 200kA 500 500 500kcmil - 6 AWG 500kcmil - 6 AWG PDBFS504 760A 600 800* 600 600 100kA 2 2 240 - 16 mm 240 - 16 mm 400 - 6 400 - 6 600 600 400 200 100kA ® Ampacities 75ºC per NEC Table 310.16 and UL 508A Table 28.1 *Class L 800A (KRP-C 800_SP) or less fuses suitable for this particular SCCR case. ** Class G 60A (SC-60) or less or Class CC 30A (LP-CC-30, FNQ-R-30, KTK-R-30) or less are suitable for all these SCCRs in this table. †Higher SCCR may be available, check latest datasheet 1049. Dimensions inches (mm) C Part No. Width (A) Length (B) Height (C) PDBFS204 1.030 (26.16) 3.372 (94.80) 2.146 (54.50) PDBFS220 1.030 (26.16) 3.372 (94.80) 2.146 (54.50) PDBFS303 1.550 (39.37) 4.665 (118.50) 2.874 (73.00) PDBFS330 1.550 (39.37) 4.665 (118.50) 2.874 (73.00) PDBFS377 1.875 (47.62) 4.665 (118.50) 2.933 (74.50) B PDBFS500 2.380 (60.45) 4.665 (118.50) 2.598 (66.00) A PDBFS504 2.560 (65.02) 4.665 (118.50) 3.150 (80.00) For additional information see Datasheet #1049 located at www.cooperbussmann.com/datasheets/ulcsa ©2009 Cooper Bussmann St. Louis, MO 63178 636-394-2877 www.cooperbussmann.com Reorder # 3137 0809 Printed in USA