EATON BUSSMANN SD3110-680-R

Effective October 2017 Technical Data 4137 Supersedes March 2007 SD3110 Low profile shielded drum core power inductors Applications • Mobile phones • Digital cameras • Media players • Small LCD displays • LED driver and LED flash circuits • Hard disk drives • LCD Backlighting SMD Device Environmental data • Storage temperature range (component): -40 °C to +125 °C Product features • Operating temperature range: -40 °C to +125 °C • 3.1 mm x 3.1 mm x 1.0mm shielded drum core (ambient plus self-temperature rise) • Ferrite core material • Solder reflow temperature: • Inductance range from 0.5 uH to 220 uH J-STD-020 (latest revision) compliant • Current range from 2.27 A to 0.106 A • Frequency range up to 1 MHz Discontinued, Effective July 31, 2016 or until inventory is depleted. Please review SD3114 data sheet (4128) as an alternate replacement. SD3110 Technical Data 4137 Effective October 2017 Low profile shielded drum core power inductors Product specifications Part Number Rated OCL (1) Part Irms (2) Isat (3) DCR (Ω) K-factor Inductance (μH) Marking (A) (A) typ. @ (4) (μH) Designator +20 °C SD3110-R50-R 0.50 0.44+/-30% A 1.54 2.27 0.0420 216 SD3110-R82-R 0.82 0.82+/-30% B 1.30 1.67 0.0589 191 SD3110-1R0-R 1.0 1.05+/-30% C 1.21 1.47 0.0683 169 SD3110-1R5-R 1.5 1.60+/-30% D 0.99 1.19 0.103 137 SD3110-2R2-R 2.2 2.27+/-30% E 0.82 1.00 0.149 115 SD3110-3R3-R 3.3 3.48+/-30% F 0.72 0.81 0.195 93 SD3110-4R7-R 4.7 4.96+/-30% G 0.59 0.68 0.285 78 SD3110-6R8-R 6.8 6.70+/-30% H 0.54 0.58 0.346 67 SD3110-8R2-R 8.2 8.01+/-30% I 0.48 0.53 0.432 61 SD3110-100-R 10.0 10.18+/-30% J 0.44 0.47 0.505 54 SD3110-150-R 15.0 15.32+/-20% K 0.36 0.38 0.764 44 SD3110-220-R 22.0 21.49+/-20% L 0.30 0.32 1.13 37 SD3110-330-R 33.0 32.72+/-20% M 0.26 0.26 1.50 30 SD3110-470-R 47.0 46.29+/-20% N 0.22 0.22 2.06 25 SD3110-680-R 68.0 68.04+/-20% O 0.179 0.182 3.13 21 SD3110-820-R 82.0 82.65+/-20% P 0.167 0.166 3.57 19 SD3110-101-R 100 101+/-20% Q 0.146 0.150 4.72 17 SD3110-151-R 150 149+/-20% R 0.127 0.123 6.16 14 SD3110-221-R 220 219+/-20% S 0.106 0.120 9.46 12 (1) Open Circuit Inductance Test Parameters: 100 kHz, 0.1 V, 0.0 Adc. (3) Isat Amperes peak for approximately 30% rolloff (@+20 °C) (2) Irms: DC current for an approximate DT of 40 °C without core loss. Derating is (4) K-factor: Used to determine B p-p for core loss (see graph). necessary for AC currents. PCB layout, trace thickness and width, air-flow, and B p-p = K*L*ΔI, B p-p(mT), K: (K factor from table), L: (Inductance in uH), proximity of other heat generating components will affect the temperature rise. It ΔI (Peak to peak ripple current in Amps). is recommended that the temperature of the part not exceed +125 °C under worst case operating conditions verified in the end application. Dimensions- mm Marking 0.6 typ. 3.1 max. 1.0 2 plcs 2.0 1.0 max 4.0 Max. 2.0 typ. 3.6 max 2plcs 4.0 3.1 max. 1.0 typical Dimensions are in millimeters. Part Marking: 3 Digit Marking: (1st digit: Indicates inductance value per letter in Part Marking Designator); (2nd digit: Bi-weekly production date code); (3rd digit: Last digit of the year produced). Do not route trace or vias underneath the inductor Packaging information- mm 4.0 8.0 2.0 1.75 4.2 5.5 12.0 +/-0.3 Bo B1 3.2 3.2 A1=0.90mm Ao=3.9mm Ko Bo=3.6mm B1=1.25mm A1 Ko=1.2mm Parts packaged on 13" Diameter reel, Ao 4,100 parts per reel. www.eaton.com/electronics 2 Discontinued, Effective July 31, 2016 or until inventory is depleted. Please review SD3114 data sheet (4128) as an alternate replacement. SD3110 Technical Data 4137 Effective October 2017 Low profile shielded drum core power inductors Temperature rise vs total loss loss 100 90 80 70 60 50 40 30 20 10 0 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32 0.36 Total Loss (W) Core loss vs Bp-p 10 1MHz 1 500kHz 0.1 300kHz 200kHz 100kHz 0.01 50kHz 0.001 0.0001 0.00001 0.000001 1 10 100 1000 Bp-p (mT) Inductance characteristics 120% 110% 100% 90% 80% 70% -40°C 60% 50% +25°C 40% 30% +85°C 20% 10% 0% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 120% 130% 140% % of Isat 3 www.eaton.com/electronics Discontinued, Effective July 31, 2016 or until inventory is depleted. Please review SD3114 data sheet (4128) as an alternate replacement. % of OCL Core Loss (W) Temperature rise (°C) SD3110 Technical Data 4137 Low profile shielded drum core power inductors Effective October 2017 Solder Reflow Profile TP Table 1 - Standard SnPb Solder (T ) Table 1 - Standard SnPb Solder (T ) T -5°C c c C t Max. Ramp Up Rate = 3°C/s P Volume Volume Max. Ramp Down Rate = 6°C/s 3 3 Package mm mm _ Thickness <350 >350 T L <2.5mm 235°C 220°C Preheat t A _ >2.5mm 220°C 220°C T smax T Taabbllee 2 2 - - L Leeaadd ((P Pbb)) F Fr reeee S So ollddeer r ((T T )) c c Volume Volume Volume T smin 3 3 3 t s Package mm mm mm Thickness <350 350 - 2000 >2000 <1.6mm 260°C 260°C 260°C 1.6 – 2.5mm 260°C 250°C 245°C >2.5mm 250°C 245°C 245°C 25°C Time 25°C to Peak Time Reference JDEC J-STD-020 Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and Soak Temperature min. (T ) 100°C 150°C smin T emperature max. (T ) 150°C 200°C smax Time (T to T ) (t ) 60-120 Seconds 60-120 Seconds smin smax s Average ramp up rate T to T 3°C/ Second Max. 3°C/ Second Max. smax p Liquidous temperature (TL) 183°C 217°C Time at liquidous (t ) 60-150 Seconds 60-150 Seconds L Peak package body temperature (T )* Table 1 Table 2 P Time (t )** within 5 °C of the specified classification temperature (T ) 20 Seconds** 30 Seconds** p c Average ramp-down rate (T to T ) 6°C/ Second Max. 6°C/ Second Max. p smax Time 25°C to Peak Temperature 6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (T ) is defined as a supplier minimum and a user maximum. p ** Tolerance for time at peak profile temperature (t ) is defined as a supplier minimum and a user maximum. p Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Compan . Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant inju y to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton Eaton is a registered trademark. All Rights Reserved Printed in USA All other trademarks are property Publication No. 4137 of their respective owners. October 2017 Discontinued, Effective July 31, 2016 or until inventory is depleted. Please review SD3114 data sheet (4128) as an alternate replacement. Temperature