Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 17 DC axial fans DC axial fan overview 19 DC axial fans / DC diagonal fans 23 17 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 18 DC fans 3 mm m /h  25 x 8 250 2,1...4,5 23  40 x 10 400 F 6...9 24  40 x 20 400 10...13,5 25  40 x 25 400 J 19...24 26  50 x 15 500 F 11...20 27  60 x 15 600 F 19...33 28 Technical information  60 x 25 620 21...67 29  60 x 25 630 40...44 30  60 x 25 600 N 21...56 31  60 x 25 600 N VARIOFAN 16...41 32 Range of fans Voltage range  60 x 32 600 J 70...84 33 ebm-papst offers you the widest full product Many of our DC fans can be operated on volta-  70 x 15 700 F 28...44 34 line of DC axial and diagonal fans: From 25 mm ges that are up to 50% lower and 25% higher  80 x 25 8450 33...118 35  80 x 25 8400 N 33...79 36 to 280 mm in size. Every single type of fan can than their nominal voltage (see Voltage range in  80 x 25 8400 N VARIOFAN 20...58 37 be optimally integrated in the respective device the technical tables). This enables the air per-  80 x 32 8300 32...80 38 concept. The highly economical brushless motor formance to be adapted to the cooling require-  80 x 38 8200 J 132...222 39  92 x 25 3400 N 61...102 40 technology of these fans provides a unique ments and allows the noise to be reduced, even  92 x 25 3400 N VARIOFAN 44...84 41 variety of intelligent innovations that can be if the fan does not have a control input.  92 x 32 3300 56...107 42 realised today at prices that would have been  92 x 38 3200 J 130...280 43  119 x 25 4400 F 94...170 44 unthinkable just a few years ago. Closed-loop speed control and monitoring  119 x 25 4400 FN 200...225 45 Closed-loop speed control and function monito-  119 x 32 4300 95...204 46 Electronic protection against ring are becoming increasingly important in  119 x 32 4300 VARIOFAN 61...170 47  119 x 38 4400 150...285 48 reverse polarity many applications. ebm-papst offers many fans  119 x 38 4100 N 160...237 49 ebm-papst DC fans have electronically commu- in the standard design with a control input and  119 x 38 4100 NHH..NH6 260...440 50 tated drives with electronic protection against open collector speed signal.  119 x 38 4100 NH7..NH8 500...570 51  119 x 38 DV 4100 275 52 reverse polarity.The electronics are conveniently  127 x 38 5200 N 187...338 53 located in the fan hub. S-Force  127 x 38 DV 5200 270...324 54 The new S-Force fans with their extremely high  135 x 38 5100 N 122...250 55 3  140 x 51 5300 338 56 Product life expectancy blower capacity of up to 950 m /h and pressu-  140 x 51 5300 TD 410...670 57 A distinctive feature of DC fan technology is re build-up of up to 1200 pascals are capable Ø 150 x 38 7100 N 360...420 58 the convincingly high product life expectancy. of dealing with the extreme heat load. If nee- Ø 150 x 55 7200 N 360 59 172x160x52 6100 350 60 Thanks to the excellent efficiency of the brush- ded, these fans can produce up to 100% more Ø 172 x 51 6300 395...545 61 less drives, the thermal load of the bear ings is output under full load and they work with a Ø 172 x 51 6300 TD 600...950 62 172x160x51 6300 TD 710...950 63 reduced, thus con siderably increasing the life much broader delivery bandwidth than current Ø 172 x 51 DV 6200 540 64 expectancy of the fans. models. This makes them ideal for equipment Ø 172 x 51 DV 6200 TD 100...700 65 and systems with a high density of compo- 172x150x51 6400 205...480 66 172x150x51 6400 TD 90...900 67 Protection class nents. Thanks to intelligent motor features, they 172x160x51 DV 6400 530 68 DC fans with sleeve and ball bearings are pow- can be individually adapted for any application. 172x160x51 DV 6400 TD 100...680 69 ered by Class E insulated motors. All ebm-papst S-Force fans are available in 5 standard dimen- 220x200x51 2200 FTD 790...1220 70  225 x 80 W1G 200 1090 71 fans conform to the requirements of protection sions.  225 x 80 K1G 200 1020...1245 72 class IP 20. Fans conforming to IP 54 and spe-  225 x 89 K3G 200 1215...1640 73 cial protection classes are also avail able.  280 x 80 W1G 250 1920 74 18 Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 19 DC fans Axial fans for DC operation Overview of air performance 3 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 2000 3000 mm m /h  25 x 8 250 2,1...4,5 23  40 x 10 400 F 6...9 24  40 x 20 400 10...13,5 25  40 x 25 400 J 19...24 26  50 x 15 500 F 11...20 27  60 x 15 600 F 19...33 28  60 x 25 620 21...67 29 NEW  60 x 25 630 40...44 30  60 x 25 600 N 21...56 31  60 x 25 600 N VARIOFAN 16...41 32  60 x 32 600 J 70...84 NEW 33  70 x 15 700 F 28...44 34  80 x 25 8450 33...118 NEW 35  80 x 25 8400 N 33...79 36  80 x 25 8400 N VARIOFAN 20...58 37  80 x 32 8300 32...80 38  80 x 38 8200 J 132...222 39  92 x 25 3400 N 61...102 40  92 x 25 3400 N VARIOFAN 44...84 41  92 x 32 3300 56...107 42  92 x 38 3200 J 130...280 43  119 x 25 4400 F 94...170 44  119 x 25 4400 FN 200...225 45  119 x 32 4300 95...204 46  119 x 32 4300 VARIOFAN 61...170 47  119 x 38 4400 150...285 48  119 x 38 4100 N 160...237 49  119 x 38 4100 NHH..NH6 260...440 50  119 x 38 4100 NH7..NH8 500...570 51  119 x 38 DV 4100 275 52  127 x 38 5200 N 187...338 53  127 x 38 DV 5200 270...324 54  135 x 38 5100 N 122...250 55  140 x 51 5300 338 NEW 56  140 x 51 5300 TD 410...670 57 Ø 150 x 38 7100 N 360...420 58 Ø 150 x 55 7200 N 360 59 172x160x52 6100 350 NEW 60 Ø 172 x 51 6300 395...545 NEW 61 Ø 172 x 51 6300 TD 600...950 NEW 62 172x160x51 6300 TD 710...950 NEW 63 Ø 172 x 51 DV 6200 540 64 Ø 172 x 51 DV 6200 TD 100...700 65 172x150x51 6400 205...480 66 172x150x51 6400 TD 90...900 67 172x160x51 DV 6400 530 68 172x160x51 DV 6400 TD 100...680 69 220x200x51 2200 FTD 790...1220 70 NEW  225 x 80 W1G 200 1090 71  225 x 80 K1G 200 1020...1245 NEW 72 NEW  225 x 89 K3G 200 1215...1640 73  280 x 80 W1G 250 1920 74 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 2000 3000 3 m /h 19 Dimensions Series Air flow Page Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 20 Optional special versions Information on pictograms On the pages of the catalogue and on the following overview pages, the pictograms illustrated below provide information about technically possi- ble special versions in the fan line presented. Please note that these special versions are not possible for all voltages and speeds, and not in all combinations. The special versions are designed for specific customers and projects and are not usually available off the shelf. Speed signal PWM control input The fan uses a separate wire to output information The speed of the fan can be changed via a pulse-width- PPWM WM about its speed, and thus about the speed of the rotor. modulated signal. This signal is applied to a specially For technical details, please refer to page 110. provided wire. For technical details, please refer to page 121. Go / No-go alarm Analogue control input The fan uses a separate wire to output a static signal NN The speed of the fan can be changed via a control volta- GG when it is stationary, thus providing information about AA ge. This control voltage is applied to a specially provided whether or not the rotor is turning. For technical wire. For technical details, please refer to page 121. details, please refer to page 117. Multi-option control input Alarm with limit speed The fan has a control input that the user can trigger eit- If the speed drops below a certain level defined in the her using a PWM signal, an analogue signal or a fan's electronics, the fan will emit a static signal, thus resistor. For technical details, please refer to page 122. providing information about whether or not the rotor is turning. For technical details, please refer to page 114. External temperature sensor Protection against moisture An NTC is connected to the fan via a separate wire and Protection for the fan's electronics against moisture and H H PP TT the fan changes its speed depending on the temperatu- condensation. For technical details, please refer to re at the NTC. For technical details, please refer to page 123. page 120. IP 54 ¤ Internal temperature sensor Protection of motor and PCB board against splashed IP54 IP54 In this case, the NTC is integrated into the fan and the water and humidity. For technical details, please refer to II fan changes its speed depending on the temperature at page 123. the NTC. For technical details, please refer to page Protection against salt spray fog 120. Protection of fan against the damaging effects of salt SS PP spray fog. For technical details, please refer to page 123. 20 Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 21 Axial fans for DC operation Overview of technically feasible designs Please note that these special versions are not possible Axial fans for all voltages and speeds, and not in all combinations. Series mm OPTIONAL P. The special versions are designed for specific custo- 250 25 x 25 x 8 yes • –– – – – – – • – – 23 400 F 40 x 40 x 10 yes •• –– – – –– • – – 24 mers and projects. As a rule they are not available off 400 40 x 40 x 20 yes • • –– – • –– • – – 25 the shelf and are tied to minimum volumes. 400 J 40 x 40 x 25 yes • • –– – – – – • • – 26 Please consult your customer support representative 500 F 50 x 50 x 15 yes • • –– – • –– • – – 27 about the feasibility of your special variant. 600 F 60 x 60 x 15 yes •• – –– • – – • – – 28 620 60 x 60 x 25 yes •• • • • • • – •• – 29 NEW 630 60 x 60 x 25 yes •• • • • • • – •• • 30 600 N 60 x 60 x 25 yes / •• – •• – –– •• – 31 600 N VARIOFAN 60 x 60 x 25 yes / • • – • • – –– • – – 32 NEW 600 J 60 x 60 x 32 yes •• –– – – – – • – – 33 700 F 70 x 70 x 15 yes •• –– – – – – • – – 34 NEW 8450 80 x 80 x 25 yes •• –– – • –– • – – 35 8400 N 80 x 80 x 25 yes / • •• • • • • – • • – 36 8400 N VARIOFAN 80 x 80 x 25 yes • • – • • –– – • – – 37 8300 80 x 80 x 32 yes / •• • • • • • – •• • 38 8200 J S-Force 80 x 80 x 38 yes •• • • • • • – • – – 39 3400 N 92 x 92 x 25 yes / •• • • • • • – •• – 40 3400 N VARIOFAN 92 x 92 x 25 yes • • – • • –– – • – – 41 3300 92 x 92 x 32 yes / •• • • • • • – •• • 42 3200 J 92 x 92 x 38 yes • •• • • • • – • • – 43 4400 F 119 x 119 x 25 yes / •• • • • • • – • – – 44 4400 FN 119 x 119 x 25 yes •• • • • • • – • – – 45 4300 119 x 119 x 32 yes / •• • • • • • – •• • 46 4300 VARIOFAN 119 x 119 x 32 yes •• • • • • • – • – – 47 4400 119 x 119 x 38 yes •• • • • • • – • – – 48 4100 N 119 x 119 x 38 yes / •• • • • • • – •• • 49 4100 NH..NH6 119 x 119 x 38 yes •• • • • • • – • – – 50 4100 NH7..NH8 119 x 119 x 38 yes •• • • • • • – • – – 51 DV 4100 119 x 119 x 38 yes •• • • • • • – •• • 52 5200 N 127 x 127 x 38 yes •• • • • • • – •• • 53 DV 5200 127 x 127 x 38 yes •• • • • • • – •• • 54 5100 N 135 x 135 x 38 yes •• • • • • • – •• • 55 NEW 5300 S-Force 140 x 140 x 51 yes •• • • • • • – •• • 56 5300 TDS-Force 140 x 140 x 51 yes •• • • • • • • • – – 57 7100 N 150 Ø x 38 yes •• • • • • • – •• • 58 7200 N 150 Ø x 55 yes •• • • • • • – •• • 59 NEW 6100 N 172 x 160 x 51 yes •• • • • • • – •• • 60 NEW 6300 S-Force 172 Ø x 51 yes •• • • • • • – •• • 61 NEW 6300 TDS-Force 172 Ø x 51 yes •• • • • • • • • • • 62 NEW 6300 TDS-Force 172 x 160 x 51 yes •• • • • • • • • • • 63 DV 6200 172 Ø x 51 yes •• • • • • • – •• • 64 DV 6200 TD 172 Ø x 51 yes •• • • • • • – •• • 65 6400 172 x 150 x 51 yes •• • • • • • – •• • 66 6400 TD 172 x 150 x 51 yes •• • • • • • – •• • 67 DV 6400 172 x 160 x 51 yes •• • • • • • – •• • 68 DV 6400 TD 172 x 160 x 51 yes •• • • • • • – •• • 69 NEW 2200 FTD 200 Ø x 51 yes •• • • • • • • • • • 70 W1G 200 225 x 225 x 80 UL/CSA •• • • – •• • • – • 71 NEW K1G 200 225 x 225 x 80 yes •• • • – •• • • – • 72 NEW K3G 200 225 x 225 x 89 yes •• • • – •• • • – • 73 * approvals – not yet available Sleeve bearings W1G 250 280 x 280 x 80 UL/CSA •• • • – •• • • – • 74 • available Ball bearings applied for 21 Dimensions VDE, UL, CSA Sintec sleeve bearings/ball bearings Sensor Go / No-go alarm Alarm with limit speed External temperature sensor Internal temperature sensor PWM control input Analogue control input Multi-option control input Humidity protection IP >= IP54 Salt spray fog protection a P ge Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 22 Connection instructions for S-Force fans Special features of S-Force fans The S-Force series is the most powerful product series on the market. S-Force stands for the highest innovation in motor technology, fluid mecha- nics and electronics. The one-of-a-kind power density of the products requires special attention to the application at the customer's facility. 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Service life 255 M 2,1 1,2 5 4,5...5,5 5 < 3 0,2 6 000 -10...+70 45 000 / 14 000 45 000 1 +Vs Due to the high currents in the fans, the load on the electrolyte capaci- 255 N 3,2 1,9 5 4,5...5,5 16 < 3 0,4 9 600 -10...+70 40 000 / 12 000 40 000 2 /2 tors is greater, which reduces the service life of the capacitor. As a lar- 255 H 4,5 2,6 5 4,5...5,5 23 4,4 0,6 12 000 -10...+55 35 000 / 12 000* 30 000 3 /2 Power Supply ger or additional capacitor cannot be housed in the fan, the capacitor M 252 N 3,2 1,9 12 10...14 15 < 3 0,5 9 000 -10...+70 40 000 / 12 000 40 000 2 /2 Micro- must be housed in the supply line. controller 252 H 4,5 2,6 12 10...14 23 4,4 0,7 12 000 -10...+55 35 000 / 12 000* 30 000 3 GND If the power pack of the application has a corresponding capacitor, in some cases it may be possible to omit the external capacitor. Recommended measure: Additional external capa- citor (thus must be installed as close to the fan as possible < 30 cm). Fan Capacitor Recommended capacitors required We recommend using the following capacitors from Rubycon: 24 VDC: S-Force axial 50 ZL 680 µF; 12,5 mm x 30 mm or 8200 / 3200 JH3-JH4 no 50 ZLH 680 µF 12,5 mm x 30 mm 4100 NH3 / NH4 / NH5 / NH6 no 4100 NH7 / NH8 yes 48 VDC: 5300 / 5300 TD no 100 YXG 470 µF; 16 mm x 35,5 mm or 6300 / 6300 TD no 100 ZLH 470 µF 16 mm x 31,5 mm 2200 FTD no Other capacitors with equal or greater capacitance and equal or lower S-Force centrifugal serial resistance can also be used. RET 97 TD yes ebm-papst St. Georgen offers the following capacitors ex stock: RER 120 TD yes 24 VDC: 1000 µF / 50 V, 16 mm x 25 mm RER 133 TD no Art. No.: 992 0345 000 (LZ 354) RER 160 NTDHH yes REF 175 TD no 48 VDC: 680 µF / 100 V, 18 mm x 40 mm RER 175 TD no Art. No. : 992 0355 000 (LZ 355) RER 190 TD / RG 190 TD no RER 220 TD / RG 220 no RER 225 TDM / RG 225 TDM no RER 225 TD / RG 225 TD yes 22 Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 23 3 max. 4,5 m /h DC axial fans Series 250 25 x 25 x 8 mm Highlights: – Compact fan with low power consumption. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 5 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 255 M 2,1 1,2 5 4,5...5,5 5 < 3 0,2 6 000 -10...+70 45 000 / 14 000 45 000 1 255 N 3,2 1,9 5 4,5...5,5 16 < 3 0,4 9 600 -10...+70 40 000 / 12 000 40 000 2 /2 255 H 4,5 2,6 5 4,5...5,5 23 4,4 0,6 12 000 -10...+55 35 000 / 12 000* 30 000 3 /2 252 N 3,2 1,9 12 10...14 15 < 3 0,5 9 000 -10...+70 40 000 / 12 000 40 000 2 /2 252 H 4,5 2,6 12 10...14 23 4,4 0,7 12 000 -10...+55 35 000 / 12 000* 30 000 3 * at 55 °C 50 3 40 30 2 20 1 10 0 0,4 0,8 1,2 1,6 2,0 2,4 CFM 1 2 3 4 m³/h 23 H H PP Pa [in H O] 0,05 0,10 0,15 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (20 °C) 10 ebm-papst Standard Service life L (60 °C) 10 ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 24 3 max. 9 m /h DC axial fans Series 400 F 40 x 40 x 10 mm Highlights: – Compact fan with low power consumption. – Some models suitable for use at high ambient temperatures. General characteristics: – Material: fibreglass-reinforced plastic. impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 17 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 405 F 8 4,7 5 4,5...5,5 22,1 4,4 0,7 5 400 -20...+70 45 000 / 15 000 47 500 2 /2 405 10,0 5,9 5 4,5...5,5 18 3,8 0,9 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 405 FH 9 5,3 5 4,5...5,5 26,0 4,6 0,9 6 000 -20...+70 45 000 / 15 000 47 500 3 /2 412 10,0 5,9 12 10...14 18 3,8 0,9 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 412 FM 6 3,5 12 10...14 16,5 3,8 0,6 4 300 -20...+70 45 000 / 15 000 47 500 1 412 H 13,5 7,9 12 10...14 29 4,7 1,6 8 100 -20...+60 45 000 / 15 000 47 500 2 /39 412 F 8 4,7 12 10...14 22,1 4,4 0,7 5 400 -20...+70 45 000 / 15 000 47 500 2 414 10,0 5,9 24 20...28 18 3,8 1,0 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 412 FH 9 5,3 12 10...14 26,0 4,6 0,8 6 000 -20...+70 45 000 / 15 000 47 500 3 /2 414 H 13,5 7,9 24 20...26,5 29 4,7 1,6 8 100 -20...+60 45 000 / 15 000 47 500 2 /2 414 F 8 4,7 24 20...28 22,1 4,4 0,8 5 400 -20...+70 45 000 / 15 000 47 500 2 /2 414 FH 9 5,3 24 21,6...26,4 26,0 4,4 0,9 6 000 -20...+70 45 000 / 15 000 47 500 3 412-099 10,0 5,9 12 10...14 18 3,8 0,8 6 000 -20...+85 50 000 / 20 000 62 500 1 Models with temperature range up to +85 °C. 412 FM-074 6 3,5 12 10...14 16,5 3,8 0,4 4 300 -20...+85 45 000 / 15 000 47 500 1 /2 412 F-130 8 4,7 12 10...14 22,1 4,4 0,6 5 400 -20...+85 45 000 / 15 000 47 500 2 412 FH-132 9 5,3 12 10...14 26,0 4,6 0,7 6 000 -20...+85 45 000 / 15 000 47 500 3 /2 3 30 25 2 20 1 15 10 5 0 1 2 3 4 5 CFM 2 4 6 8 m³/h 24 H H PP  Pa [in H O] 0,02 0,04 0,06 0,08 0,10 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (20 °C) 10 ebm-papst Standard Service life (60 °C) ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 25 3 max. 13,5 m /h DC axial fans Series 400 40 x 40 x 20 mm Highlights: – Compact fan with low power consumption. – Some models suitable for use at high ambient temperatures. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 27 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 405 F 8 4,7 5 4,5...5,5 22,1 4,4 0,7 5 400 -20...+70 45 000 / 15 000 47 500 2 /2 405 10,0 5,9 5 4,5...5,5 18 3,8 0,9 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 405 FH 9 5,3 5 4,5...5,5 26,0 4,6 0,9 6 000 -20...+70 45 000 / 15 000 47 500 3 /2 412 10,0 5,9 12 10...14 18 3,8 0,9 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 412 FM 6 3,5 12 10...14 16,5 3,8 0,6 4 300 -20...+70 45 000 / 15 000 47 500 1 412 H 13,5 7,9 12 10...14 29 4,7 1,6 8 100 -20...+60 45 000 / 15 000 47 500 2 /39 412 F 8 4,7 12 10...14 22,1 4,4 0,7 5 400 -20...+70 45 000 / 15 000 47 500 2 414 10,0 5,9 24 20...28 18 3,8 1,0 6 000 -20...+70 50 000 / 20 000 62 500 1 /2 412 FH 9 5,3 12 10...14 26,0 4,6 0,8 6 000 -20...+70 45 000 / 15 000 47 500 3 /2 414 H 13,5 7,9 24 20...26,5 29 4,7 1,6 8 100 -20...+60 45 000 / 15 000 47 500 2 /2 414 F 8 4,7 24 20...28 22,1 4,4 0,8 5 400 -20...+70 45 000 / 15 000 47 500 2 /2 Model with temperature range up to +85 °C. 414 FH 9 5,3 24 21,6...26,4 26,0 4,4 0,9 6 000 -20...+70 45 000 / 15 000 47 500 3 412-099 10,0 5,9 12 10...14 18 3,8 0,8 6 000 -20...+85 50 000 / 20 000 62 500 1 412 FM-074 6 3,5 12 10...14 16,5 3,8 0,4 4 300 -20...+85 45 000 / 15 000 47 500 1 /2 412 F-130 8 4,7 12 10...14 22,1 4,4 0,6 5 400 -20...+85 45 000 / 15 000 47 500 2 412 FH-132 9 5,3 12 10...14 26,0 4,6 0,7 6 000 -20...+85 45 000 / 15 000 47 500 3 /2 2 50 40 1 30 20 10 0 1 2 3 4 5 6 7 CFM 2 4 6 8 10 m³/h 25 H H PP PPWM WM  Pa [in H O] 0,05 0,10 0,15 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (20 °C) 10 ebm-papst Standard Service life (60 °C) ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 26 3 max. 24 m /h DC axial fans Series 400 J 40 x 40 x 25 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 26, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 50 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 412 J 19 11,2 12 8...14 39 5,5 2,4 10 300 -20...+70 60 000 / 30 000 120 000 1 512 F 20 11,8 12 10,8...13,2 30 4,5 1,0 5 000 -20...+70 50 000 / 20 000 62 500 2 /2 412 JH 22 12,9 12 8...13,5 43 5,8 3,0 11 700 -20...+70 60 000 / 30 000 120 000 2 /2 514 F 20 11,8 24 21,6...26,4 30 4,5 1,0 5 000 -20...+70 50 000 / 20 000 62 500 2 /2 412 JHH 24 14,1 12 8...13,5 46 6,1 3,3 13 000 -20...+60 57 500 / 35 000 110 000 3 /2 414 J 19 11,2 24 18...27 39 5,5 2,4 10 300 -20...+70 60 000 / 30 000 120 000 1 414 JH 22 12,9 24 18...27 43 5,8 3,0 11 700 -20...+70 60 000 / 30 000 120 000 2 /2 512 FL-547 11 6,5 12 11,5...13,2 12 3,7 0,4 3 000 -20...+85 50 000 / 20 000 65 500 1 414 JHH 24 14,1 24 18...27 46 6,1 3,6 13 000 -20...+60 57 500 / 35 000 110 000 3 /2 512 F-532 20 11,8 12 10,8...13,2 30 4,5 0,9 5 000 -20...+85 50 000 / 20 000 65 500 2 3 200 2 150 1 100 50 0 2 4 6 8 10 12 CFM 5 10 15 20 m³/h 26 ¤ H H IP54 IP54 PP  Pa [in H O] 0,2 0,4 0,6 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 27 3 max. 20 m /h DC axial fans Series 500 F 50 x 50 x 15 mm Highlights: – Compact fan with low power consumption. – Some models suitable for use at high ambient temperatures. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 25 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 412 J 19 11,2 12 8...14 39 5,5 2,4 10 300 -20...+70 60 000 / 30 000 120 000 1 512 F 20 11,8 12 10,8...13,2 30 4,5 1,0 5 000 -20...+70 50 000 / 20 000 62 500 2 /2 412 JH 22 12,9 12 8...13,5 43 5,8 3,0 11 700 -20...+70 60 000 / 30 000 120 000 2 /2 514 F 20 11,8 24 21,6...26,4 30 4,5 1,0 5 000 -20...+70 50 000 / 20 000 62 500 2 /2 412 JHH 24 14,1 12 8...13,5 46 6,1 3,3 13 000 -20...+60 57 500 / 35 000 110 000 3 /2 Model with temperature range up to +85 °C. 414 J 19 11,2 24 18...27 39 5,5 2,4 10 300 -20...+70 60 000 / 30 000 120 000 1 414 JH 22 12,9 24 18...27 43 5,8 3,0 11 700 -20...+70 60 000 / 30 000 120 000 2 /2 512 FL-547 11 6,5 12 11,5...13,2 12 3,7 0,4 3 000 -20...+85 50 000 / 20 000 65 500 1 414 JHH 24 14,1 24 18...27 46 6,1 3,6 13 000 -20...+60 57 500 / 35 000 110 000 3 /2 512 F-532 20 11,8 12 10,8...13,2 30 4,5 0,9 5 000 -20...+85 50 000 / 20 000 65 500 2 30 2 25 20 15 10 1 5 0 2 4 6 8 10 CFM 5 10 15 m³/h 27 H H PP PPWM WM  Pa [in H O] 0,02 0,04 0,06 0,08 0,10 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (20 °C) 10 ebm-papst Standard Service life L (60 °C) 10 ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 28 3 max. 33 m /h DC axial fans Series 600 F 60 x 60 x 15 mm Highlights: – Compact fan with low power consumption. – Some models suitable for use at high ambient temperatures. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 30 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 605 F 29 17,1 5 4,5...5,2 27 4,4 1,1 4 000 -20...+50 50 000 / 20 000 50 000 2 /2 622 L 21 12,4 12 8...15 20 3,7 0,5 3 200 -20...+85 80 000 / 20 000 160 000 1 622 M 30 17,7 12 8...15 29 4,3 1,0 4 550 -20...+75 77 500 / 30 000 150 000 2 612 FL 19 11,2 12 11,5...13,2 16 3,6 0,4 2 650 0...+70 50 000 / 20 000 62 500 1 622 N 40 23,5 12 8...15 35 4,7 1,9 6 100 -20...+70 72 500 / 35 000 140 000 3 /2 612 F 29 17,1 12 10,8...13,2 27 4,4 1,0 3 900 -20...+70 50 000 / 20 000 62 500 2 /2 622 H 46 27,1 12 8...15 39 5,1 2,3 6 850 -20...+70 70 000 / 35 000 140 000 4 612 FH 33 19,4 12 10,0...13,2 31 4,8 1,4 4 500 -20...+60 45 000 / 15 000 47 500 3 /2/39 622 HH 56 33,0 12 8...15 43 5,6 3,5 8 200 -20...+70 65 000 / 32 500 130 000 5 614 F 29 17,1 24 21,6...26,4 27 4,4 1,1 3 900 -20...+70 50 000 / 20 000 62 500 2 /2 NEW 622 /2H3P 67 39,4 12 8...13,2 48 5,9 6,3 9 700 -20...+60 52 500 / 32 500 105 000 6 624 L 21 12,4 24 18...28 20 3,7 1,0 3 200 -20...+70 80 000 / 40 000 160 000 1 Models with temperature range up to +80 / 85 °C. 624 M 30 17,7 24 12...28 29 4,3 1,5 4 550 -20...+70 77 500 / 37 500 150 000 2 612 FL-680 19 11,2 12 11,5...14 16 3,6 0,5 2 650 -20...+85 50 000 / 20 000 62 500 1 624 N 40 23,5 24 12...28 35 4,7 2,2 6 100 -20...+70 72 500 / 35 000 140 000 3 612 F-637 29 17,1 12 10,8...12,6 27 4,4 1,0 3 900 -20...+80 50 000 / 20 000 62 500 2 624 H 46 27,1 24 18...28 39 5,1 2,4 6 850 -20...+70 70 000 / 35 000 140 000 4 624 HH 56 33,0 24 18...28 43 5,6 3,6 8 200 -20...+70 65 000 / 32 500 130 000 5 /2 NEW 624 /2H3P 67 39,4 24 18...28 48 5,9 5,8 9 700 -20...+60 52 500 / 32 500 105 000 6 628 HH 56 33,0 48 36...56 43 5,6 4,2 8 200 -20...+70 65 000 / 32 500 130 000 5 /2 3 25 2 20 15 10 1 5 0 3 6 9 12 15 18 CFM 5 10 15 20 25 m³/h 28 H H PP PPWM WM  Pa [in H O] 0,02 0,04 0,06 0,08 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (20 °C) 10 ebm-papst Standard Service life L (60 °C) 10 ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 29 3 max. 67 m /h DC axial fans Series 620 60 x 60 x 25 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Motor with very low structure-borne noise. – Innovative impeller with winglets for low noise. – Control inputs, alarm and speed signals available on request. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 85 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 605 F 29 17,1 5 4,5...5,2 27 4,4 1,1 4 000 -20...+50 50 000 / 20 000 50 000 2 /2 622 L 21 12,4 12 8...15 20 3,7 0,5 3 200 -20...+85 80 000 / 20 000 160 000 1 622 M 30 17,7 12 8...15 29 4,3 1,0 4 550 -20...+75 77 500 / 30 000 150 000 2 612 FL 19 11,2 12 11,5...13,2 16 3,6 0,4 2 650 0...+70 50 000 / 20 000 62 500 1 622 N 40 23,5 12 8...15 35 4,7 1,9 6 100 -20...+70 72 500 / 35 000 140 000 3 /2 612 F 29 17,1 12 10,8...13,2 27 4,4 1,0 3 900 -20...+70 50 000 / 20 000 62 500 2 /2 622 H 46 27,1 12 8...15 39 5,1 2,3 6 850 -20...+70 70 000 / 35 000 140 000 4 612 FH 33 19,4 12 10,0...13,2 31 4,8 1,4 4 500 -20...+60 45 000 / 15 000 47 500 3 /2/39 622 HH 56 33,0 12 8...15 43 5,6 3,5 8 200 -20...+70 65 000 / 32 500 130 000 5 614 F 29 17,1 24 21,6...26,4 27 4,4 1,1 3 900 -20...+70 50 000 / 20 000 62 500 2 /2 NEW 622 /2H3P 67 39,4 12 8...13,2 48 5,9 6,3 9 700 -20...+60 52 500 / 32 500 105 000 6 624 L 21 12,4 24 18...28 20 3,7 1,0 3 200 -20...+70 80 000 / 40 000 160 000 1 624 M 30 17,7 24 12...28 29 4,3 1,5 4 550 -20...+70 77 500 / 37 500 150 000 2 612 FL-680 19 11,2 12 11,5...14 16 3,6 0,5 2 650 -20...+85 50 000 / 20 000 62 500 1 624 N 40 23,5 24 12...28 35 4,7 2,2 6 100 -20...+70 72 500 / 35 000 140 000 3 612 F-637 29 17,1 12 10,8...12,6 27 4,4 1,0 3 900 -20...+80 50 000 / 20 000 62 500 2 624 H 46 27,1 24 18...28 39 5,1 2,4 6 850 -20...+70 70 000 / 35 000 140 000 4 624 HH 56 33,0 24 18...28 43 5,6 3,6 8 200 -20...+70 65 000 / 32 500 130 000 5 /2 NEW 624 /2H3P 67 39,4 24 18...28 48 5,9 5,8 9 700 -20...+60 52 500 / 32 500 105 000 6 628 HH 56 33,0 48 36...56 43 5,6 4,2 8 200 -20...+70 65 000 / 32 500 130 000 5 /2 6 175 140 105 70 35 5 125 0 10 20 30 CFM 10 20 30 40 50 60 m³/h 4 100 3 75 2 50 1 25 0 5 10 15 20 25 30 CFM 10 20 30 40 50 m³/h ¤ 29 H H NN IP54 IP54 AA PP GG PPWM WM TT II  Pa [in H O] 0,1 0,2 0,3 0,4 2 Air flow Air flow Pa 0,2 0,4 0,6 [in H O] 2 Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (Tmax) 10 ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 30 3 max. 44 m /h DC axial fans Series 630 60 x 60 x 25 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Motor with very low structure-borne noise. – Control inputs, alarm and speed signals available on request. – Developed for applications with stringent environmental requirements. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 70 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-118 NEW 632 NU 40 23,5 12 6...15 33 5,2 1,8 5 900 -20...+70 85 000 / 42 500 170 000 1 612 NGLE 21 12,4 12 8...15 16 3,6 0,6 2 500 -20...+85 80 000 / 27 500 160 000 1 NEW 632 /2HPU 44 25,9 12 10,8...13,2 35 5,4 1,5 6 400 -20...+70 85 000 / 42 500 170 000 2 612 NLE 21 12,4 12 8...15 16 3,6 0,4 2 500 -20...+85 80 000 / 27 500 160 000 1 612 NGMLE 25 14,7 12 8...15 19 3,9 0,7 3 000 -20...+80 80 000 / 32 500 160 000 2 NEW 638 /2HPU 44 25,9 48 40...60 35 5,4 1,8 6 400 -20...+70 85 000 / 42 500 170 000 2 612 NMLE 25 14,7 12 8...15 19 3,9 0,4 3 000 -20...+85 80 000 / 27 500 160 000 2 612 NGME 35 20,6 12 8...15 28 4,6 1,2 4 100 -20...+75 80 000 / 35 000 160 000 3 612 NME 35 20,6 12 8...15 28 4,6 0,8 4 100 -20...+75 80 000 / 35 000 160 000 3 /2 612 NN 42 24,7 12 8...15 35 5,0 1,6 5 100 -20...+70 70 000 / 35 000 140 000 4 612 NH 46 27,1 12 8...15 37 5,3 2,0 5 600 -20...+70 70 000 / 35 000 140 000 5 /2 612 NHH-118 56 33,0 12 8...15 41 5,7 2,9 6 800 -20...+70 60 000 / 30 000 120 000 6 /2 614 NGL 21 12,4 24 18...28 16 3,6 1,0 2 500 -20...+70 80 000 / 40 000 160 000 1 614 NL 21 12,4 24 18...28 16 3,6 0,9 2 500 -20...+70 80 000 / 40 000 160 000 1 /2 614 NGML 25 14,7 24 18...28 19 3,9 1,2 3 000 -20...+70 80 000 / 40 000 160 000 2 /2 614 NML 25 14,7 24 18...28 19 3,9 1,0 3 000 -20...+70 80 000 / 40 000 160 000 2 614 NGM 35 20,6 24 18...28 28 4,6 1,7 4 100 -20...+70 80 000 / 40 000 160 000 3 /12 614 NM 35 20,6 24 18...28 28 4,6 1,4 4 100 -20...+70 80 000 / 40 000 160 000 3 /2/39 614 NN 42 24,7 24 18...28 35 5,0 1,8 5 100 -20...+70 70 000 / 35 000 140 000 4 614 NH 46 27,1 24 18...26 37 5,3 2,1 5 600 -20...+70 70 000 / 35 000 140 000 5 /2 614 NHH 56 33,0 24 18...26 41 5,7 3,0 6 850 -20...+70 60 000 / 30 000 120 000 6 614 NHH-119 56 33,0 24 18...28 41 5,7 3,0 6 850 -20...+70 60 000 / 30 000 120 000 6 /2 618 NM 35 20,6 48 36...56 28 4,6 1,4 4 100 -20...+70 80 000 / 40 000 160 000 3 618 NN 42 24,7 48 36...56 35 5,0 2,1 5 100 -20...+65 70 000 / 40 000 140 000 4 /2/12/39 110 2 100 90 1 80 70 60 50 40 30 20 10 05 10 15 20 25 [CFM] 3 5 10 15 20 25 30 35 40 [m /h] 30 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT [Pa] 0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 31 3 max. 56 m /h DC axial fans Series 600 N 60 x 60 x 25 mm Highlights: – Ball bearings and sleeve bearings available. – Some models suitable for use at high ambient temperatures up to 85 °C. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 66 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-118 632 NU 40 23,5 12 6...15 33 5,2 1,8 5 900 -20...+70 85 000 / 42 500 170 000 1 612 NGLE 21 12,4 12 8...15 16 3,6 0,6 2 500 -20...+85 80 000 / 27 500 160 000 1 632 /2HPU 44 25,9 12 10,8...13,2 35 5,4 1,5 6 400 -20...+70 85 000 / 42 500 170 000 2 612 NLE 21 12,4 12 8...15 16 3,6 0,4 2 500 -20...+85 80 000 / 27 500 160 000 1 612 NGMLE 25 14,7 12 8...15 19 3,9 0,7 3 000 -20...+80 80 000 / 32 500 160 000 2 638 /2HPU 44 25,9 48 40...60 35 5,4 1,8 6 400 -20...+70 85 000 / 42 500 170 000 2 612 NMLE 25 14,7 12 8...15 19 3,9 0,4 3 000 -20...+85 80 000 / 27 500 160 000 2 612 NGME 35 20,6 12 8...15 28 4,6 1,2 4 100 -20...+75 80 000 / 35 000 160 000 3 612 NME 35 20,6 12 8...15 28 4,6 0,8 4 100 -20...+75 80 000 / 35 000 160 000 3 /2 612 NN 42 24,7 12 8...15 35 5,0 1,6 5 100 -20...+70 70 000 / 35 000 140 000 4 612 NH 46 27,1 12 8...15 37 5,3 2,0 5 600 -20...+70 70 000 / 35 000 140 000 5 /2 612 NHH-118 56 33,0 12 8...15 41 5,7 2,9 6 800 -20...+70 60 000 / 30 000 120 000 6 /2 614 NGL 21 12,4 24 18...28 16 3,6 1,0 2 500 -20...+70 80 000 / 40 000 160 000 1 614 NL 21 12,4 24 18...28 16 3,6 0,9 2 500 -20...+70 80 000 / 40 000 160 000 1 /2 614 NGML 25 14,7 24 18...28 19 3,9 1,2 3 000 -20...+70 80 000 / 40 000 160 000 2 /2 614 NML 25 14,7 24 18...28 19 3,9 1,0 3 000 -20...+70 80 000 / 40 000 160 000 2 614 NGM 35 20,6 24 18...28 28 4,6 1,7 4 100 -20...+70 80 000 / 40 000 160 000 3 /12 614 NM 35 20,6 24 18...28 28 4,6 1,4 4 100 -20...+70 80 000 / 40 000 160 000 3 /2/39 614 NN 42 24,7 24 18...28 35 5,0 1,8 5 100 -20...+70 70 000 / 35 000 140 000 4 614 NH 46 27,1 24 18...26 37 5,3 2,1 5 600 -20...+70 70 000 / 35 000 140 000 5 /2 614 NHH 56 33,0 24 18...26 41 5,7 3,0 6 850 -20...+70 60 000 / 30 000 120 000 6 614 NHH-119 56 33,0 24 18...28 41 5,7 3,0 6 850 -20...+70 60 000 / 30 000 120 000 6 /2 618 NM 35 20,6 48 36...56 28 4,6 1,4 4 100 -20...+70 80 000 / 40 000 160 000 3 618 NN 42 24,7 48 36...56 35 5,0 2,1 5 100 -20...+65 70 000 / 40 000 140 000 4 /2/12/39 6 100 5 80 4 60 3 40 2 20 1 0 5 10 15 20 25 30 CFM 10 20 30 40 50 m³/h ¤ 31 H H NN IP54 IP54 PP GG TT II  Pa [in H O] 0,1 0,2 0,3 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Air flow Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 32 3 max. 41 m /h DC axial fans Series 600 N VARIOFAN 60 x 60 x 25 mm Highlights: – Open loop speed control by means of external or internal temperature sensor. – Automatic speed adjustment according to cooling requirements. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 66 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 18 10,6 14 3,5 1,3 2 150 1 612 JH 70 41,1 12 7...13,6 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 /2 30°C 612 NGMI 12 8...12,6 -20...+65 80 000 / 45 000 160 000 55°C 35 20,6 28 4,6 1,7 4 100 2 614 JH 70 41,1 24 14...26,4 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 /2 16 9,4 16 3,6 1,0 2 400 3 30°C 612 NMI 12 8...12,6 -20...+65 80 000 / 45 000 160 000 618 JH 70 41,1 48 36...60 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 55°C 35 20,6 28 4,6 1,4 4 100 4 23 13,5 18 3,8 1,7 2 900 5 30°C 612 NGNI 12 8...12,6 -20...+65 70 000 / 40 000 142 500 NEW 614 J/2HHP 82 48,3 24 18...30 62 7,6 14,6 15 000 -20...+75 65 000 / 25 000 130 000 2 55°C 41 24,1 35 5,0 2,4 5 100 6 23 13,5 18 3,8 1,2 2 900 5 NEW 30°C 618 J/2HHP 82 48,3 48 38...58 62 7,6 14,6 15 000 -20...+75 65 000 / 25 000 130 000 2 612 NNI 12 8...12,6 -20...+65 70 000 / 40 000 142 500 55°C 41 24,1 35 5,0 1,5 5 100 6 23 13,5 18 3,8 1,7 2 900 5 30°C 612 NGNV 12 8...12,6 -20...+65 70 000 / 40 000 142 500 55°C 41 24,1 35 5,0 2,4 5 100 6 612 NGMI 612 NGNI 612 NMI 612 NNI 6 2 4 612 NGNV 40 40 60 30 30 40 20 20 5 1 3 20 10 10 30°C 55°C 30°C 55°C 30°C 55°C 0 3 6 9 12 15 18 CFM 0 3 6 9 12 15 18 CFM 0 4 8 12 16 20 CFM 5 10 15 20 25 30 m³/h 5 10 15 20 25 30 m³/h 10 20 30 m³/h V-Types I-Types NTC- + Temperature Sensor NTC TemperatureSensor The temperature sensor for control- ling the motor speed is not included Temperature sensor (NTC-resistor) in delivery. for controlling the motor speed is Temperature sensor LZ 370 see positioned directly in the air flow. accessories. 32 H H NN PP GG TT II  Pa 0,05 0,10 0,15 [in H O] 2 Air flow Air flow Nominal voltage Voltage range  Pa [in H O] 0,05 0,10 0,15 2 Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed  Pa Temperature range 0,05 0,10 0,15 0,20 0,25 [in H O] 2 Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 33 3 max. 82 m /h DC axial fans Series 600 J 60 x 60 x 32 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Innovative impeller with winglets for low noise. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 100 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 18 10,6 14 3,5 1,3 2 150 1 612 JH 70 41,1 12 7...13,6 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 /2 612 NGMI 12 8...12,6 -20...+65 80 000 / 45 000 160 000 35 20,6 28 4,6 1,7 4 100 2 614 JH 70 41,1 24 14...26,4 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 /2 16 9,4 16 3,6 1,0 2 400 3 612 NMI 12 8...12,6 -20...+65 80 000 / 45 000 160 000 618 JH 70 41,1 48 36...60 53 6,4 7,7 11 700 -20...+70 57 500 / 27 500 115 000 1 35 20,6 28 4,6 1,4 4 100 4 Fan types with streamer and integrated guard grille. 23 13,5 18 3,8 1,7 2 900 5 612 NGNI 12 8...12,6 -20...+65 70 000 / 40 000 142 500 NEW 614 J/2HHP 82 48,3 24 18...30 62 7,6 14,6 15 000 -20...+75 65 000 / 25 000 130 000 2 41 24,1 35 5,0 2,4 5 100 6 23 13,5 18 3,8 1,2 2 900 5 NEW 618 J/2HHP 82 48,3 48 38...58 62 7,6 14,6 15 000 -20...+75 65 000 / 25 000 130 000 2 612 NNI 12 8...12,6 -20...+65 70 000 / 40 000 142 500 41 24,1 35 5,0 1,5 5 100 6 23 13,5 18 3,8 1,7 2 900 5 612 NGNV 12 8...12,6 -20...+65 70 000 / 40 000 142 500 41 24,1 35 5,0 2,4 5 100 6 Rear view of types 614 J/2HHP and 618 J/2HHP 550 2 500 450 400 350 300 1 250 200 150 100 50 0 10 20 30 40 [CFM] 3 10 20 30 40 50 60 70 [m /h] 33 H H NN AA PP GG PPWM WM TT [Pa] 0,25 0,5 0,75 1 1,25 1,5 1,75 2 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 34 3 max. 44 m /h DC axial fans Series 700 F 70 x 70 x 15 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24 to AWG 28, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 53 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours 712 F/2L-005* 28 16,5 12 8...13,8 25 4,7 0,6 3 300 -20...+70 60 000 / 30 000 120 000 1 /2 8452 GL 32 18,8 12 8...15 14 3,3 0,4 1 700 -20...75 80 000 / 35 000 160 000 1 712 F/2M-006* 36 21,2 12 8...13,8 32 5,0 1,1 4 300 -20...+70 60 000 / 30 000 120 000 2 /2 8452 GM 58 34,1 12 8...15 32 4,7 1,3 3 100 -20...75 80 000 / 35 000 160 000 2 712 F 44 25,9 12 8...13,8 38 5,3 1,7 5 300 -20...+70 60 000 / 30 000 120 000 3 /2 8452 GN 68 40,0 12 8...15 36 5,0 1,8 3 600 -20...70 70 000 / 35 000 140 000 3 714 F 44 25,9 24 18...28 38 5,3 1,5 5 300 -20...+70 60 000 / 30 000 120 000 3 8452 /2 GHP 75 44,1 12 10,8...13,2 38 5,3 2,5 4 000 -20...70 70 000 / 35 000 140 000 4 *Version with 3-pole Molex plug housing 22-01-2035 Molex Contacts 08-50-0113 8452 /2 GHHP 83 48,8 12 10,8...13,2 42 5,5 3,5 4 400 -20...60 65 000 / 40 000 130 000 5 NEW 8452 /2 H4P 117 68,8 12 8...15 50 6,4 6,8 6 200 -20...70 60 000 / 30 000 120 000 6 NEW 8454 /2 H4P 117 68,8 24 20,0...26,4 50 6,4 6,8 6 200 -20...70 60 000 / 30 000 120 000 6 60 3 50 40 2 30 20 1 10 0 4 8 12 16 20 24 CFM 10 20 30 40 m³/h 34 H H NN PP GG  Pa [in H O] 0,05 0,10 0,15 0,20 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:25 Seite 35 3 max. 117 m /h DC axial fans Series 8450 80 x 80 x 25 mm Highlights: – Highly stable characteristic curve for high air flow at high back pressure. – Motor with very low structure-borne noise properties. – Innovative impeller with winglets for low noise. – Extremely quiet Sintec sleeve bearing / ball bearing. – Models with PWM control and open collector speed signal. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 105 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours 712 F/2L-005* 28 16,5 12 8...13,8 25 4,7 0,6 3 300 -20...+70 60 000 / 30 000 120 000 1 /2 8452 GL 32 18,8 12 8...15 14 3,3 0,4 1 700 -20...75 80 000 / 35 000 160 000 1 712 F/2M-006* 36 21,2 12 8...13,8 32 5,0 1,1 4 300 -20...+70 60 000 / 30 000 120 000 2 /2 8452 GM 58 34,1 12 8...15 32 4,7 1,3 3 100 -20...75 80 000 / 35 000 160 000 2 712 F 44 25,9 12 8...13,8 38 5,3 1,7 5 300 -20...+70 60 000 / 30 000 120 000 3 /2 8452 GN 68 40,0 12 8...15 36 5,0 1,8 3 600 -20...70 70 000 / 35 000 140 000 3 714 F 44 25,9 24 18...28 38 5,3 1,5 5 300 -20...+70 60 000 / 30 000 120 000 3 Models with 25 kHz PWM control and speed signal to 4-wire specification (see P. 121). 8452 /2 GHP 75 44,1 12 10,8...13,2 38 5,3 2,5 4 000 -20...70 70 000 / 35 000 140 000 4 8452 /2 GHHP 83 48,8 12 10,8...13,2 42 5,5 3,5 4 400 -20...60 65 000 / 40 000 130 000 5 Models with 1-30 kHz PWM control and speed signal. NEW 8452 /2 H4P 117 68,8 12 8...15 50 6,4 6,8 6 200 -20...70 60 000 / 30 000 120 000 6 NEW 8454 /2 H4P 117 68,8 24 20,0...26,4 50 6,4 6,8 6 200 -20...70 60 000 / 30 000 120 000 6 6 100 75 5 50 4 3 2 25 1 0 10 20 30 40 50 60 [CFM] 3 20 40 60 80 100 [m /h] 35 H H NN AA PP GG PPWM WM TT II [Pa] 0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 36 3 max. 79 m /h DC axial fans Series 8400 N 80 x 80 x 25 mm Highlights: – Ball bearings and sleeve bearings available. – Some models suitable for use at high ambient temperatures up to 85 °C. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 95 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/112 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 117 8412 NGLE 33 19,4 12 8...15 12 3,5 0,5 1 500 -20...+85 80 000 / 27 500 160 000 1 /2 20 11,8 < 10 < 3 0,9 900 1 8412 NGLV 12 10...14 -20...+70 80 000 / 40 000 160 000 8412 NLE 33 19,4 12 8...15 17 3,7 0,3 1 500 -20...+85 80 000 / 27 500 160 000 1 33 19,4 12 3,5 1,1 1 500 2 8412 NGMLE 45 26,5 12 8...15 19 3,9 0,9 2 050 -20...+80 80 000 / 32 500 160 000 2 27 15,9 < 10 3,0 1,1 1 200 3 8412 NGMLV 12 8...14 -20...+70 80 000 / 40 000 160 000 /37 8412 NMLE 45 26,5 12 8...15 21 4,0 0,6 2 050 -20...+85 80 000 / 27 500 160 000 2 45 26,6 19 3,9 1,5 2 050 4 8412 NGME 58 34,1 12 8...15 26 4,3 1,4 2 600 -20...+75 80 000 / 35 000 160 000 3 /2 35 20,6 < 13 3,5 1,4 1 600 5 8412 NME 58 34,1 12 8...15 27 4,4 1,0 2 600 -20...+75 80 000 / 35 000 160 000 3 8412 NGMI 12 8...14 -20...+70 80 000 / 35 000 125 000 58 34,1 26 4,3 2,0 2 600 6 8412 NG 69 40,6 12 8...15 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8412 N 69 40,6 12 8...15 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8412 NH 79 46,5 12 8...13,2 37 5,0 2,2 3 600 -20...+70 70 000 / 35 000 140 000 5 /2/12 8412 NH-217 79 46,5 12 8...15 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 8414 NGL 33 19,4 24 18...28 12 3,5 0,7 1 500 -20...+70 80 000 / 40 000 160 000 1 /2 8414 NL 33 19,4 24 18...28 17 3,7 0,7 1 500 -20...+70 80 000 / 40 000 160 000 1 8414 NGML 45 26,5 24 18...28 19 3,9 1,1 2 050 -20...+70 80 000 / 40 000 160 000 2 8414 NML 45 26,5 24 18...28 21 4,0 1,1 2 050 -20...+70 80 000 / 40 000 160 000 2 8414 NGM 58 34,1 24 18...28 26 4,3 1,4 2 600 -20...+70 80 000 / 40 000 160 000 3 /2 8414 NM 58 34,1 24 18...28 27 4,4 1,4 2 600 -20...+70 80 000 / 40 000 160 000 3 8414 NG 69 40,6 24 18...28 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8414 N 69 40,6 24 18...28 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8414 NH 79 46,5 24 18...26 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 /2 8414 NH-221 79 46,5 24 18...28 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 8418 N 69 40,6 48 36...56 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 5 40 4 30 3 20 2 10 1 0 8 16 24 32 40 CFM 10 20 30 40 50 60 m³/h 36 ¤ H H NN IP54 IP54 AA PP GG PPWM WM TT II  Pa [in H O] 0,05 0,10 0,15 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Air flow Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 37 3 max. 58 m /h DC axial fans Series 8400 N VARIOFAN 80 x 80 x 25 mm Highlights: – Open loop speed control by means of (external or internal) temperature sensor. – Automatic speed adjustment according to cooling requirements. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 95 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/112 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 117 8412 NGLE 33 19,4 12 8...15 12 3,5 0,5 1 500 -20...+85 80 000 / 27 500 160 000 1 /2 20 11,8 < 10 < 3 0,9 900 1 30°C 8412 NGLV 12 10...14 -20...+70 80 000 / 40 000 160 000 50°C 8412 NLE 33 19,4 12 8...15 17 3,7 0,3 1 500 -20...+85 80 000 / 27 500 160 000 1 33 19,4 12 3,5 1,1 1 500 2 8412 NGMLE 45 26,5 12 8...15 19 3,9 0,9 2 050 -20...+80 80 000 / 32 500 160 000 2 27 15,9 < 10 3,0 1,1 1 200 3 30°C 8412 NGMLV 12 8...14 -20...+70 80 000 / 40 000 160 000 /37 8412 NMLE 45 26,5 12 8...15 21 4,0 0,6 2 050 -20...+85 80 000 / 27 500 160 000 2 50°C 45 26,6 19 3,9 1,5 2 050 4 8412 NGME 58 34,1 12 8...15 26 4,3 1,4 2 600 -20...+75 80 000 / 35 000 160 000 3 /2 35 20,6 < 13 3,5 1,4 1 600 5 30°C 8412 NME 58 34,1 12 8...15 27 4,4 1,0 2 600 -20...+75 80 000 / 35 000 160 000 3 8412 NGMI 12 8...14 -20...+70 80 000 / 35 000 125 000 50°C 58 34,1 26 4,3 2,0 2 600 6 8412 NG 69 40,6 12 8...15 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8412 N 69 40,6 12 8...15 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 8412 NH 79 46,5 12 8...13,2 37 5,0 2,2 3 600 -20...+70 70 000 / 35 000 140 000 5 /2/12 8412 NGMLV 8412 NGMV 8412 NGLV 8412 NH-217 79 46,5 12 8...15 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 2 8412 NGMI 6 4 25 8414 NGL 33 19,4 24 18...28 12 3,5 0,7 1 500 -20...+70 80 000 / 40 000 160 000 1 /2 7,5 15 20 8414 NL 33 19,4 24 18...28 17 3,7 0,7 1 500 -20...+70 80 000 / 40 000 160 000 1 8414 NGML 45 26,5 24 18...28 19 3,9 1,1 2 050 -20...+70 80 000 / 40 000 160 000 2 5 10 15 8414 NML 45 26,5 24 18...28 21 4,0 1,1 2 050 -20...+70 80 000 / 40 000 160 000 2 1 10 8414 NGM 58 34,1 24 18...28 26 4,3 1,4 2 600 -20...+70 80 000 / 40 000 160 000 3 /2 2,5 5 3 5 5 8414 NM 58 34,1 24 18...28 27 4,4 1,4 2 600 -20...+70 80 000 / 40 000 160 000 3 30°C 50°C 30°C 50°C 30°C 50°C 8414 NG 69 40,6 24 18...28 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 0 4 8 12 16 20 CFM 0 5 10 15 20 25 CFM 0 5 10 15 20 25 30 CFM 10 20 30 10 20 30 40 10 20 30 40 50 8414 N 69 40,6 24 18...28 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 /2 m³/h m³/h m³/h 8414 NH 79 46,5 24 18...26 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 /2 8414 NH-221 79 46,5 24 18...28 37 5,0 2,4 3 600 -20...+70 70 000 / 35 000 140 000 5 8418 N 69 40,6 48 36...56 32 4,7 2,0 3 100 -20...+70 70 000 / 35 000 140 000 4 I-Types V-Types NTC- + Temperature Sensor NTC TemperatureSensor The temperature sensor for control- Temperature sensor (NTC-resistor) ling the motor speed is not included for controlling the motor speed is in delivery. positioned directly in the air flow. Temperature sensor LZ 370 see accessories. 37 H H NN PP GG TT II  Pa [in H O] 0,01 0,02 0,03 2 Air flow Air flow Nominal voltage Voltage range  Pa [in H O] 0,02 0,04 0,06 2 Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Pa  Temperature range [in H O] 0,02 0,04 0,06 0,08 2 Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 38 3 DC axial fans max. 80 m /h Series 8300 80 x 80 x 32 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 170 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 8312 L 32 18,8 12 6...15 24 4,0 1,2 2 000 -20...+75 80 000 / 32 500 160 000 1 8212 JN 132 77,7 12 7...13,8 55 6,6 10 8400 -20...+70 62 500 / 32 500 130 000 1 /2 8312 M 48 28,3 12 6...15 34 5,0 2,2 3 000 -20...+75 70 000 / 27 500 140 000 2 8212 JH3 190 111,8 12 6...13,8 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8312 54 31,8 12 6...15 36 5,2 2,6 3 300 -20...+75 70 000 / 27 500 140 000 3 8212 JH4 222 130,7 12 6...13,8 71 7,8 39 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8312 HL 67 39,4 12 6...15 43 5,8 4,0 4 200 -20...+75 62 500 / 25 000 125 000 4 /2 8214 JN 132 77,7 24 18...26,4 55 6,6 10 8400 -20...+70 62 500 / 32 500 130 000 1 /2 8312 H 80 47,1 12 6...12,6 48 6,2 6,5 5 000 -20...+60 55 000 / 35 000 110 000 5 8214 JH3 190 111,8 24 12...27,6 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8314 L 32 18,8 24 12...31,5 24 4,0 1,0 2 000 -20...+75 80 000 / 32 500 160 000 1 8214 JH4 222 130,7 24 12...27,6 71 7,8 38 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8314 M 48 28,3 24 12...31,5 34 5,0 2,3 3 000 -20...+75 70 000 / 27 500 140 000 2 8218 JN 132 77,7 48 36...53 55 6,6 11 8400 -20...+70 62 500 / 32 500 130 000 1 /2 8314 54 31,8 24 12...31,5 36 5,2 2,7 3 300 -20...+75 70 000 / 27 500 140 000 3 /2 8218 JH3 190 111,8 48 20...58 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8314 HL 67 39,4 24 12...31,5 43 5,8 4,3 4 200 -20...+75 62 500 / 25 000 125 000 4 /2 8218 JH4 222 130,7 48 20...58 71 7,8 36 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8314 H 80 47,1 24 12...28 48 6,2 6,0 5 000 -20...+75 55 000 / 22 500 100 000 5 /2/19 8318 54 31,8 48 36...56 36 5,2 2,6 3 300 -20...+75 70 000 / 27 500 140 000 3 /2/17 8318 HL 67 39,4 48 36...56 43 5,8 4,3 4 200 -20...+75 62 500 / 25 000 125 000 4 8318 H 80 47,1 48 36...56 48 6,2 5,8 5 000 -20...+65 55 000 / 30 000 100 000 5 /17 Rotor protrusion max. 0,4 mm. 5 120 100 4 80 3 60 2 40 20 1 0 8 16 24 32 40 CFM 10 20 30 40 50 60 m³/h 38 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,1 0,2 0,3 0,4 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 39 3 max. 222 m /h DC axial fans Series 8200 J 80 x 80 x 38 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Innovative impeller with winglets for low noise. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. Protected against reverse polarity and locking. – Connection via single strands AWG 24 (H3 and H4: AWG 22), TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 160 g (H3 and H4: 200 g). Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 8312 L 32 18,8 12 6...15 24 4,0 1,2 2 000 -20...+75 80 000 / 32 500 160 000 1 8212 JN 132 77,7 12 7...13,8 55 6,6 10 8400 -20...+70 62 500 / 32 500 130 000 1 /2 8312 M 48 28,3 12 6...15 34 5,0 2,2 3 000 -20...+75 70 000 / 27 500 140 000 2 8212 JH3 190 111,8 12 6...13,8 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8312 54 31,8 12 6...15 36 5,2 2,6 3 300 -20...+75 70 000 / 27 500 140 000 3 8212 JH4 222 130,7 12 6...13,8 71 7,8 39 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8312 HL 67 39,4 12 6...15 43 5,8 4,0 4 200 -20...+75 62 500 / 25 000 125 000 4 /2 8214 JN 132 77,7 24 18...26,4 55 6,6 10 8400 -20...+70 62 500 / 32 500 130 000 1 /2 8312 H 80 47,1 12 6...12,6 48 6,2 6,5 5 000 -20...+60 55 000 / 35 000 110 000 5 8214 JH3 190 111,8 24 12...27,6 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8314 L 32 18,8 24 12...31,5 24 4,0 1,0 2 000 -20...+75 80 000 / 32 500 160 000 1 8214 JH4 222 130,7 24 12...27,6 71 7,8 38 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8314 M 48 28,3 24 12...31,5 34 5,0 2,3 3 000 -20...+75 70 000 / 27 500 140 000 2 8218 JN 132 77,7 48 36...53 55 6,6 11 8400 -20...+70 62 500 / 32 500 130 000 1 /2 8314 54 31,8 24 12...31,5 36 5,2 2,7 3 300 -20...+75 70 000 / 27 500 140 000 3 /2 8218 JH3 190 111,8 48 20...58 66 7,3 25 12 000 -20...+70 55 000 / 27 500 110 000 2 /2 8314 HL 67 39,4 24 12...31,5 43 5,8 4,3 4 200 -20...+75 62 500 / 25 000 125 000 4 /2 8218 JH4 222 130,7 48 20...58 71 7,8 36 14 000 -20...+70 50 000 / 25 000 100 000 3 /2 8314 H 80 47,1 24 12...28 48 6,2 6,0 5 000 -20...+75 55 000 / 22 500 100 000 5 /2/19 8200 JH3 and JH4 also as standard with PWM control input and speed signal. 8318 54 31,8 48 36...56 36 5,2 2,6 3 300 -20...+75 70 000 / 27 500 140 000 3 /2/17 Speed control range from 2000 RPM up to maximum nominal speed. Stationary at 0 % PWM, 8318 HL 67 39,4 48 36...56 43 5,8 4,3 4 200 -20...+75 62 500 / 25 000 125 000 4 maximum speed at sensor break. 8318 H 80 47,1 48 36...56 48 6,2 5,8 5 000 -20...+65 55 000 / 30 000 100 000 5 /17 3 600 500 2 400 300 1 200 100 0 25 50 75 100 125 CFM 50 100 150 200 m³/h ¤ 39 H H NN IP54 IP54 AA PP GG PPWM WM TT II  Pa [in H O] 0,4 0,8 1,2 1,6 2,0 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 40 3 max. 102 m /h DC axial fans Series 3400 N 92 x 92 x 25 mm Highlights: – Ball bearings and sleeve bearings available. – Some models suitable for use at high ambient temperatures up to 85 °C. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 100 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 117 3412 NGLE 61 35,9 12 8...15 23 4,0 1,1 1 950 -20...+80 80 000 / 30 000 160 000 1 44 25,9 14 3,5 1,5 1 400 1 3412 NGMV 12 8...14 -20...+70 75 000 / 37 500 142 500 3412 NLE 61 35,9 12 8...15 23 4,0 0,8 1 950 -20...+85 80 000 / 27 500 160 000 1 72 42,4 28 4,3 2,0 2 300 2 3412 NGME 72 42,4 12 8...15 28 4,3 1,6 2 300 -20...+75 75 000 / 32 500 150 000 2 3412 NME 72 42,4 12 8...15 28 4,3 1,1 2 300 -20...+75 75 000 / 32 500 150 000 2 /2 50 29,4 16 3,7 1,6 1 600 3 3412 NG 84 49,4 12 8...15 32 4,7 2,2 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3412 NGV 12 8...12,6 -20...+70 75 000 / 37 500 142 500 /37 84 49,4 32 4,7 2,5 2 700 4 3412 N 84 49,4 12 8...15 32 4,7 2,2 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3412 NGH 94 55,3 12 8...15 36 5,0 2,5 3 000 -20...+70 70 000 / 35 000 140 000 4 3412 NH 94 55,3 12 8...15 36 5,0 2,5 3 000 -20...+70 70 000 / 35 000 140 000 4 /39 3412 NGHH 102 60,0 12 8...13,2 39 5,1 3,2 3 250 -20...+60 70 000 / 45 000 150 000 5 /2 3412 NHH 102 60,0 12 8...13,2 39 5,1 2,9 3 250 -20...+60 70 000 / 45 000 150 000 5 /2 3412 NHH-379 102 60,0 12 8...15 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 3414 NGL 61 35,9 24 18...28 23 4,0 1,4 1 950 -20...+70 80 000 / 40 000 160 000 1 3414 NL 61 35,9 24 18...28 23 4,0 1,4 1 950 -20...+70 80 000 / 40 000 160 000 1 3414 NGM 72 42,4 24 18...28 28 4,3 1,8 2 300 -20...+70 75 000 / 37 500 150 000 2 3414 NM 72 42,4 24 18...28 28 4,3 1,8 2 300 -20...+70 75 000 / 37 500 150 000 2 3414 NG 84 49,4 24 18...28 32 4,7 2,3 2 700 -20...+70 70 000 / 35 000 140 000 3 3414 N 84 49,4 24 18...28 32 4,7 2,3 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3414 NGH 94 55,3 24 18...26 36 5,0 3,0 3 000 -20...+70 70 000 / 35 000 140 000 4 /2 3414 NH 94 55,3 24 18...26 36 5,0 3,0 3 000 -20...+70 70 000 / 35 000 140 000 4 3414 NGHH 102 60,0 24 18...26 39 5,1 3,2 3 250 -20...+70 70 000 / 35 000 140 000 5 /2 3414 NGHH-389 102 60,0 24 18...28 39 5,1 3,2 3 250 -20...+70 70 000 / 35 000 140 000 5 3414 NHH 102 60,0 24 18...26 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 /39 3414 NHH-386 102 60,0 24 18...28 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 3418 N 84 49,4 48 36...56 32 4,7 2,4 2 700 -20...+70 70 000 / 35 000 140 000 3 Other 48 VDC models on request. 5 40 4 3 30 2 20 1 10 0 10 20 30 40 50 CFM 20 40 60 80 m³/h 40 ¤ H H NN IP54 IP54 AA PP GG PPWM WM TT II  Pa [in H O] 0,05 0,10 0,15 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 41 3 max. 84 m /h DC axial fans Series 3400 N VARIOFAN 92 x 92 x 25 mm Highlights: – Open loop speed control by means of external or internal temperature sensor. – Automatic speed adjustment according to cooling requirements. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 100 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 117 3412 NGLE 61 35,9 12 8...15 23 4,0 1,1 1 950 -20...+80 80 000 / 30 000 160 000 1 44 25,9 14 3,5 1,5 1 400 1 30°C 3412 NGMV 12 8...14 -20...+70 75 000 / 37 500 142 500 3412 NLE 61 35,9 12 8...15 23 4,0 0,8 1 950 -20...+85 80 000 / 27 500 160 000 1 50°C 72 42,4 28 4,3 2,0 2 300 2 3412 NGME 72 42,4 12 8...15 28 4,3 1,6 2 300 -20...+75 75 000 / 32 500 150 000 2 3412 NME 72 42,4 12 8...15 28 4,3 1,1 2 300 -20...+75 75 000 / 32 500 150 000 2 /2 50 29,4 16 3,7 1,6 1 600 3 30°C 3412 NG 84 49,4 12 8...15 32 4,7 2,2 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3412 NGV 12 8...12,6 -20...+70 75 000 / 37 500 142 500 /37 50°C 84 49,4 32 4,7 2,5 2 700 4 3412 N 84 49,4 12 8...15 32 4,7 2,2 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3412 NGH 94 55,3 12 8...15 36 5,0 2,5 3 000 -20...+70 70 000 / 35 000 140 000 4 3412 NH 94 55,3 12 8...15 36 5,0 2,5 3 000 -20...+70 70 000 / 35 000 140 000 4 /39 3412 NGHH 102 60,0 12 8...13,2 39 5,1 3,2 3 250 -20...+60 70 000 / 45 000 150 000 5 /2 3412 NHH 102 60,0 12 8...13,2 39 5,1 2,9 3 250 -20...+60 70 000 / 45 000 150 000 5 /2 3412 NHH-379 102 60,0 12 8...15 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 3412 NGMV 3414 NGL 61 35,9 24 18...28 23 4,0 1,4 1 950 -20...+70 80 000 / 40 000 160 000 1 2 + 3414 NL 61 35,9 24 18...28 23 4,0 1,4 1 950 -20...+70 80 000 / 40 000 160 000 1 20 3414 NGM 72 42,4 24 18...28 28 4,3 1,8 2 300 -20...+70 75 000 / 37 500 150 000 2 NTC 3414 NM 72 42,4 24 18...28 28 4,3 1,8 2 300 -20...+70 75 000 / 37 500 150 000 2 15 TemperatureSensor 3414 NG 84 49,4 24 18...28 32 4,7 2,3 2 700 -20...+70 70 000 / 35 000 140 000 3 3414 N 84 49,4 24 18...28 32 4,7 2,3 2 700 -20...+70 70 000 / 35 000 140 000 3 /2 3414 NGH 94 55,3 24 18...26 36 5,0 3,0 3 000 -20...+70 70 000 / 35 000 140 000 4 /2 The temperature sensor for controlling the 10 3414 NH 94 55,3 24 18...26 36 5,0 3,0 3 000 -20...+70 70 000 / 35 000 140 000 4 motor speed is not included in delivery. 3414 NGHH 102 60,0 24 18...26 39 5,1 3,2 3 250 -20...+70 70 000 / 35 000 140 000 5 /2 Temperature sensor LZ 370 see accessories. 1 5 3414 NGHH-389 102 60,0 24 18...28 39 5,1 3,2 3 250 -20...+70 70 000 / 35 000 140 000 5 3414 NHH 102 60,0 24 18...26 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 /39 30°C 50°C 3414 NHH-386 102 60,0 24 18...28 39 5,1 2,7 3 250 -20...+70 70 000 / 35 000 140 000 5 0 8 16 24 32 40 CFM 3418 N 84 49,4 48 36...56 32 4,7 2,4 2 700 -20...+70 70 000 / 35 000 140 000 3 10 20 30 40 50 60 m³/h 3412 NGV 4 25 20 15 10 3 5 30°C 50°C 0 8 16 24 32 40 CFM 10 20 30 40 50 60 70 m³/h 41 H H NN PP GG TT II  Pa  Pa [in H O] 0,02 0,04 0,06 0,08 [in H O] 2 0,02 0,04 0,06 0,08 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 42 3 max. 107 m /h DC axial fans Series 3300 92 x 92 x 32 mm Highlights: – Ball bearings and sleeve bearings available. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 190 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-114 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 3312 L 56 33,0 12 6...15 29 4,5 1,4 2 150 -20...+75 80 000 / 35 000 147 500 1 3212 JN 130 76,5 12 7...13,8 51 6,1 7,5 6 000 -20 ...+70 70 000 / 35 000 140 000 1 /2 3312 GM 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2 3212 JH 146 86,0 12 7...15 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2 3312 M 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2 3212 JH3 237 139,5 12 6...13,8 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3312 80 47,1 12 6...15 37 5,2 2,4 3 000 -20...+75 70 000 / 30 000 135 000 3 /2 3212 JH4 280 164,8 12 6...13,8 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 /2 3312-177 93 54,7 12 6...15 43 5,7 3,5 3 500 -20...+75 65 000 / 27 500 122 500 5 3214 JN 130 76,5 24 11...28 51 6,1 8,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1 3314 G 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3 3214 JH 146 86,0 24 11...30 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2 3314 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3 /17 3214 JH3 237 139,5 24 12...27,6 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3314-140 85 50,0 24 12...28 40 5,4 3,0 3 200 -20...+75 70 000 / 30 000 135 000 4 3214 JH4 280 164,8 24 12...27,6 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 3314 H 107 63,0 24 12...28 47 6,0 5,3 4 000 -20...+75 57 500 / 25 000 112 500 6 /2 3218 JN 130 76,5 48 36...56 51 6,1 7,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1 3318 80 47,1 48 36...56 37 5,2 2,7 3 000 -20...+75 70 000 / 30 000 135 000 3 /2 3218 JH 146 86,0 48 36...53 55 6,4 9,5 6 800 -20 ...+70 70 000 / 35 000 140 000 2 3318 H 107 63,0 48 36...56 47 6,0 4,3 4 000 -20...+60 57 500 / 35 000 112 500 6 /2/17 3218 JH3 237 139,5 48 20...58,0 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3218 JH4 280 164,8 48 20...58,0 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 Rotor protrusion max. 0,4 mm. 6 70 5 4 60 3 50 40 2 30 1 20 10 0 10 20 30 40 50 60 CFM 20 40 60 80 100 m³/h 42 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,05 0,10 0,15 0,20 0,25 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 43 3 max. 280 m /h DC axial fans Series 3200 J 92 x 92 x 38 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Innovative impeller with winglets for low noise. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. Protected against reverse polarity and locking. – Connection via single strands AWG 24 (H3 and H4: AWG 22), TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 240 g (H3 and H4: 280 g). Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-114 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 3312 L 56 33,0 12 6...15 29 4,5 1,4 2 150 -20...+75 80 000 / 35 000 147 500 1 3212 JN 130 76,5 12 7...13,8 51 6,1 7,5 6 000 -20 ...+70 70 000 / 35 000 140 000 1 /2 3312 GM 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2 3212 JH 146 86,0 12 7...15 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2 3312 M 68 40,0 12 6...15 34 4,8 1,7 2 600 -20...+75 70 000 / 30 000 135 000 2 3212 JH3 237 139,5 12 6...13,8 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3312 80 47,1 12 6...15 37 5,2 2,4 3 000 -20...+75 70 000 / 30 000 135 000 3 /2 3212 JH4 280 164,8 12 6...13,8 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 /2 3312-177 93 54,7 12 6...15 43 5,7 3,5 3 500 -20...+75 65 000 / 27 500 122 500 5 3214 JN 130 76,5 24 11...28 51 6,1 8,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1 3314 G 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3 3214 JH 146 86,0 24 11...30 55 6,4 9,0 6 800 -20 ...+70 70 000 / 35 000 140 000 2 /2 3314 80 47,1 24 12...28 37 5,2 2,6 3 000 -20...+75 70 000 / 30 000 135 000 3 /17 3214 JH3 237 139,5 24 12...27,6 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3314-140 85 50,0 24 12...28 40 5,4 3,0 3 200 -20...+75 70 000 / 30 000 135 000 4 3214 JH4 280 164,8 24 12...27,6 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 3314 H 107 63,0 24 12...28 47 6,0 5,3 4 000 -20...+75 57 500 / 25 000 112 500 6 /2 3218 JN 130 76,5 48 36...56 51 6,1 7,0 6 000 -20 ...+70 70 000 / 35 000 140 000 1 3318 80 47,1 48 36...56 37 5,2 2,7 3 000 -20...+75 70 000 / 30 000 135 000 3 /2 3218 JH 146 86,0 48 36...53 55 6,4 9,5 6 800 -20 ...+70 70 000 / 35 000 140 000 2 3318 H 107 63,0 48 36...56 47 6,0 4,3 4 000 -20...+60 57 500 / 35 000 112 500 6 /2/17 3218 JH3 237 139,5 48 20...58,0 69 7,8 30,0 11 000 -20 ...+70 65 000 / 32 500 130 000 3 /2 3218 JH4 280 164,8 48 20...58,0 73 8,2 50,0 13 000 -20 ...+70 60 000 / 30 000 120 000 4 3200 JH3 and JH4 also as standard with PWM control input and speed signal. Speed control range from 2000 RPM up to maximum nominal speed. Stationary at 0 % PWM, maximum speed at sensor break. 700 4 600 500 3 400 300 200 300 100 2 0 25 50 75 100 125 150 CFM 200 50 100 150 250 m³/h 200 1 100 0 20 40 60 80 100 CFM 50 100 150 m³/h ¤ 43 H H NN IP54 IP54 AA PP GG PPWM WM TT II  Pa [in H O] 0,4 0,8 1,2 2 Air flow  Pa [in H O] Air flow 0,4 0,8 1,2 1,6 2,0 2,4 2 Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 44 3 DC axial fans max. 170 m /h Series 4400 F 119 x 119 x 25 mm Highlights: – Ball bearings and sleeve bearings available. – Open loop speed control available on request. – Alarm and speed signals available on request. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 175 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-118 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 4412 FGL 94 55,3 12 7...14 26 3,9 1,3 1 600 -20...+75 80 000 / 35 000 157 500 1 /2/39 4412 FNH 225 132,4 12 7...13,2 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 /2 4412 FGML 114 67,1 12 7...12,6 32 4,3 2,0 1 950 -20...+75 75 000 / 32 500 145 000 2 /2 4414 FNN 200 117,7 24 14...28 52 6,5 8,5 4 850 -20...+70 60 000 / 30 000 120 000 1 /2 4412 FML 114 67,1 12 7...12,6 32 4,3 2,0 1 950 -20...+75 75 000 / 32 500 145 000 2 4414 FNH 225 132,4 24 18...26,4 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 /39 4412 FGM 140 82,4 12 7...12,6 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /12/39 4418 FNH 225 132,4 48 36...53 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 4412 FM 140 82,4 12 7...12,6 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /2 4412 FG 170 100,1 12 8...12,6 43 5,3 5,3 2 900 -20...+60 60 000 / 37 500 120 000 4 4412 F 170 100,1 12 8...12,6 43 5,3 5,3 2 900 -20...+60 60 000 / 37 500 120 000 4 /2 4414 FL 94 55,3 24 18...28 26 3,9 1,0 1 600 -20...+75 80 000 / 35 000 157 500 1 /2 4414 FM 140 82,4 24 12...28 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /2 4414 FG 170 100,1 24 12...28 43 5,3 5,0 2 900 -20...+60 60 000 / 37 500 120 000 4 /2 4414 F 170 100,1 24 12...28 43 5,3 5,0 2 900 -20...+60 60 000 / 37 500 120 000 4 /2/39 4418 FG 170 100,1 48 28...53 43 5,3 5,5 2 900 -20...+60 60 000 / 37 500 120 000 4 4418 F 170 100,1 48 28...53 43 5,3 5,5 2 900 -20...+60 60 000 / 37 500 120 000 4 /2/12 Available on request: Fan housing with moulded-in spacers. For mounting over both flanges. 4 50 3 40 30 2 1 20 10 0 15 30 45 60 75 90 CFM 25 50 75 100 125 m³/h 44 H H NN AA PP GG II PPWM WM TT  Pa [in H O] 0,05 0,10 0,15 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 45 3 max. 225 m /h DC axial fans Series 4400 FN 119 x 119 x 25 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Innovative impeller with winglets for low noise. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 240 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-118 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/118 4412 FGL 94 55,3 12 7...14 26 3,9 1,3 1 600 -20...+75 80 000 / 35 000 157 500 1 /2/39 4412 FNH 225 132,4 12 7...13,2 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 /2 4412 FGML 114 67,1 12 7...12,6 32 4,3 2,0 1 950 -20...+75 75 000 / 32 500 145 000 2 /2 4414 FNN 200 117,7 24 14...28 52 6,5 8,5 4 850 -20...+70 60 000 / 30 000 120 000 1 /2 4412 FML 114 67,1 12 7...12,6 32 4,3 2,0 1 950 -20...+75 75 000 / 32 500 145 000 2 4414 FNH 225 132,4 24 18...26,4 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 /39 4412 FGM 140 82,4 12 7...12,6 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /12/39 4418 FNH 225 132,4 48 36...53 55 6,7 12 5 400 -20...+70 60 000 / 30 000 120 000 2 4412 FM 140 82,4 12 7...12,6 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /2 4412 FG 170 100,1 12 8...12,6 43 5,3 5,3 2 900 -20...+60 60 000 / 37 500 120 000 4 4412 F 170 100,1 12 8...12,6 43 5,3 5,3 2 900 -20...+60 60 000 / 37 500 120 000 4 /2 4414 FL 94 55,3 24 18...28 26 3,9 1,0 1 600 -20...+75 80 000 / 35 000 157 500 1 /2 4414 FM 140 82,4 24 12...28 38 4,8 3,2 2 400 -20...+75 70 000 / 30 000 135 000 3 /2 4414 FG 170 100,1 24 12...28 43 5,3 5,0 2 900 -20...+60 60 000 / 37 500 120 000 4 /2 4414 F 170 100,1 24 12...28 43 5,3 5,0 2 900 -20...+60 60 000 / 37 500 120 000 4 /2/39 4418 FG 170 100,1 48 28...53 43 5,3 5,5 2 900 -20...+60 60 000 / 37 500 120 000 4 4418 F 170 100,1 48 28...53 43 5,3 5,5 2 900 -20...+60 60 000 / 37 500 120 000 4 /2/12 2 175 150 1 125 100 75 50 25 0 20 40 60 80 100 120 CFM 50 100 150 200 m³/h 45 H H NN AA PP GG II PPWM WM TT  Pa [in H O] 0,1 0,2 0,3 0,4 0,5 0,6 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 46 3 max. 204 m /h DC axial fans Series 4300 119 x 119 x 32 mm Highlights: – Ball bearings and sleeve bearings available. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 220 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 114 4312 GL 95 55,9 12 6...15 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 65 38,2 25 3,9 1,1 1 100 1 4312 MT 12 8...15 -20...+65 70 000 / 40 000 142 500 /17 4312 L 95 55,9 12 6...15 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 138 81,2 39 5,3 3,0 2 300 2 4312 GM 140 82,4 12 6...15 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 85 50,0 29 4,2 2,4 1 400 3 4312 T 12 8...13,2 -20...+65 65 000 / 35 000 132 500 /17 4312 M 140 82,4 12 6...15 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 /12 170 100,1 45 5,8 5,5 2 800 4 4312 G 170 100,1 12 6...15 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 85 50,0 29 4,2 1,6 1 400 3 4312 170 100,1 12 6...15 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 /2/19 4314 T 24 18...32 -20...+65 65 000 / 35 000 132 500 /17 170 100,1 45 5,8 4,8 2 800 4 4312-179 204 120,1 12 6...13,2 51 6,4 8,5 3 400 -20...+75 47 500 / 20 000 90 000 5 61 35,9 21 — 2,6 1 000 5 4314 L 95 55,9 24 12...28 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 4318 V 48 40...53 -20...+65 65 000 / 35 000 132 500 /17 170 100,0 45 5,8 5,4 2 800 6 4314 M 140 82,4 24 12...28 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 4314 G 170 100,1 24 12...28 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 4314 170 100,1 24 12...28 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 112 500 3 /2/12 4314-147 180 105,9 24 12...28 47 6,1 5,8 3 000 -20...+75 57 500 / 25 000 112 500 4 4314-180 204 120,1 24 12...26,5 51 6,4 9,5 3 400 -20...+75 45 000 / 20 000 90 000 5 4318 M 140 82,4 48 36...56 39 5,3 3,5 2 300 -20...+75 70 000 / 30 000 135 000 2 4318 170 100,1 48 36...53 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 112 500 3 /2/17 Rotor protrusion max. 0,4 mm. 5 80 4 3 60 2 40 20 1 0 15 30 45 60 75 90 CFM 25 50 75 100 125 150 m³/h 46 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,1 0,2 0,3 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 47 3 max. 170 m /h DC axial fans Series 4300 119 x 119 x 32 mm Highlights: – Open loop speed control by means of external or internal temperature sensor. – Automatic speed adjustment according to cooling requirements. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 220 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 114 4312 GL 95 55,9 12 6...15 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 65 38,2 25 3,9 1,1 1 100 1 25°C 4312 MT 12 8...15 -20...+65 70 000 / 40 000 142 500 /17 50°C 4312 L 95 55,9 12 6...15 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 138 81,2 39 5,3 3,0 2 300 2 4312 GM 140 82,4 12 6...15 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 85 50,0 29 4,2 2,4 1 400 3 25°C 4312 T 12 8...13,2 -20...+65 65 000 / 35 000 132 500 /17 4312 M 140 82,4 12 6...15 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 /12 50°C 170 100,1 45 5,8 5,5 2 800 4 4312 G 170 100,1 12 6...15 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 85 50,0 29 4,2 1,6 1 400 3 30°C 4312 170 100,1 12 6...15 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 /2/19 4314 T 24 18...32 -20...+65 65 000 / 35 000 132 500 /17 50°C 170 100,1 45 5,8 4,8 2 800 4 4312-179 204 120,1 12 6...13,2 51 6,4 8,5 3 400 -20...+75 47 500 / 20 000 90 000 5 61 35,9 21 — 2,6 1 000 5 25°C 4314 L 95 55,9 24 12...28 30 4,3 1,2 1 550 -20...+75 80 000 / 35 000 157 500 1 4318 V 48 40...53 -20...+65 65 000 / 35 000 132 500 /17 50°C 170 100,0 45 5,8 5,4 2 800 6 4314 M 140 82,4 24 12...28 39 5,3 2,6 2 300 -20...+75 70 000 / 30 000 135 000 2 4314 G 170 100,1 24 12...28 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 122 500 3 4312 MV 4312 T 4318 V 4 6 4314 V 2 4314 170 100,1 24 12...28 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 112 500 3 /2/12 60 60 40 4314-147 180 105,9 24 12...28 47 6,1 5,8 3 000 -20...+75 57 500 / 25 000 112 500 4 50 50 4314-180 204 120,1 24 12...26,5 51 6,4 9,5 3 400 -20...+75 45 000 / 20 000 90 000 5 30 40 40 4318 M 140 82,4 48 36...56 39 5,3 3,5 2 300 -20...+75 70 000 / 30 000 135 000 2 30 30 20 4318 170 100,1 48 36...53 45 5,8 5,0 2 800 -20...+75 62 500 / 27 500 112 500 3 /2/17 20 20 3 10 1 10 10 5 25°C/ 25°C 50°C 30°C 50°C 25°C 50°C 0 10 20 30 40 50 60 70 0 15 30 45 60 75 90 0 15 30 45 60 75 90 CFM CFM CFM 20 40 60 80 100 m³/h 25 50 75 100 125 m³/h 25 50 75 100 125 m³/h Rotor protrusion max. 0.4 mm. + NTC TemperatureSensor The temperature sensor for controlling the motor speed is not included in delivery. Temperature sensor LZ 370 see accessories. 47 H H NN AA PP GG II PPWM WM TT  Pa 0,05 0,10 0,15 [in H O] 2 Air flow Air flow Nominal voltage Pa Voltage range  [in H O] 0,05 0,10 0,15 0,20 2 Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed  Pa [in H O] 0,05 0,10 0,15 0,20 2 Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 48 3 DC axial fans max. 285 m /h Series 4400 119 x 119 x 38 mm Highlights: – Innovative impeller with winglets for low noise. – Control inputs, alarm and speed signals available on request. – High-speed version with 5000 rpm, standard models available with /2 and PWM. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 24, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation clockwise, seen on rotor. – Mass: 270 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-114 4412 L 150 88,3 12 7...14 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4182 NGX 160 94,2 12 7...15 44 5,3 3,5 2 800 -10...+75 85 000 / 37 500 167 500 1 /2 4412 M 184 108,3 12 7...14 42 5,3 4,2 3 300 -20...+70 65 000 / 32 500 130 000 2 4182 NX 180 105,9 12 7...15 49 5,7 4,5 3 200 -30...+75 85 000 / 37 500 167 500 2 /2/12 4412 N 205 120,7 12 7...14 46 5,6 5,5 3 650 -20...+70 62 500 / 30 000 120 000 3 /2 4182 NXH 237 139,5 12 7...14 57 6,5 11,0 4 400 -30...+55 70 000 / 50 000 142 500 3 4412 H 240 141,3 12 7...14 50 6,0 8,9 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4184 NGX 160 94,2 24 12...30 44 5,3 3,5 2 800 -10...+75 85 000 / 37 500 167 500 1 /2 4412 /2 HHP 285 167,7 12 7...14,5 55 6,4 13,0 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 4184 NXM 160 94,2 24 12...30 44 5,3 3,5 2 800 -30...+75 85 000 / 37 500 167 500 1 4414 L 150 88,3 24 18...28 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4184 NX 180 105,9 24 12...29 49 5,7 4,5 3 200 -30...+75 85 000 / 37 500 167 500 2 /2/17 4414 M 184 108,3 24 18...28 42 5,3 4,0 3 300 -20...+70 65 000 / 32 500 130 000 2 4184 NXH 237 139,5 24 12...25 57 6,5 11,0 4 400 -30...+55 70 000 / 50 000 142 500 3 /2 4414 N 205 120,7 24 18...28 46 5,6 5,2 3 650 -20...+70 62 500 / 30 000 120 000 3 4188 NGX 160 94,2 48 36...56 44 5,3 3,8 2 800 -10...+75 85 000 / 37 500 167 500 1 4414 H 240 141,3 24 18...28 50 6,0 8,6 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4188 NXM 160 94,2 48 36...56 44 5,3 3,5 2 800 -30...+75 85 000 / 37 500 167 500 1 /12 4414 HH 285 164,8 24 16...28 55 6,4 14,0 5 000 -20...+70 50 000 / 25 000 100 000 5 4414 /2 HHP 285 167,7 24 18...28 55 6,4 12,0 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 4418 L 150 88,3 48 36...60 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4418 M 184 108,3 48 36...60 42 5,3 4,2 3 300 -20...+70 65 000 / 32 500 130 000 2 4418 N 205 120,7 48 36...60 46 5,6 5,2 3 650 -20...+70 62 500 / 30 000 120 000 3 4418 H 240 141,3 48 36...60 50 6,0 8,6 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4418 /2 HHP 285 167,7 48 36...60 55 6,4 13,5 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 175 5 150 125 100 75 125 50 4 25 100 3 0 20 40 60 80 100 120 140 CFM 50 100 150 200 250 m³/h 75 2 50 1 25 0 25 50 75 100 125 CFM 50 100 150 200 m³/h 48 H H NN AA PP GG PPWM WM TT II  Pa [in H O] 0,1 0,2 0,3 0,4 2 Air flow  Pa Air flow [in H O] 0,1 0,2 0,3 0,4 0,5 0,6 2 Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst standard Service life L (T ) 10 max ebm-papst standard Life expectancy L ∆ (40 °C) see P. 15 10 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 49 3 max. 237 m /h DC axial fans Series 4100 N 119 x 119 x 38 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Electrical connection with flat plugs, 2.8 x 0.5 mm. Optionally with strands. – Air intake over struts. Direction of rotation clockwise, seen on rotor. – Mass: 390 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-114 4412 L 150 88,3 12 7...14 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4182 NGX 160 94,2 12 7...15 44 5,3 3,5 2 800 -10...+75 85 000 / 37 500 167 500 1 /2 4412 M 184 108,3 12 7...14 42 5,3 4,2 3 300 -20...+70 65 000 / 32 500 130 000 2 4182 NX 180 105,9 12 7...15 49 5,7 4,5 3 200 -30...+75 85 000 / 37 500 167 500 2 /2/12 4412 N 205 120,7 12 7...14 46 5,6 5,5 3 650 -20...+70 62 500 / 30 000 120 000 3 /2 4182 NXH 237 139,5 12 7...14 57 6,5 11,0 4 400 -30...+55 70 000 / 50 000 142 500 3 4412 H 240 141,3 12 7...14 50 6,0 8,9 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4184 NGX 160 94,2 24 12...30 44 5,3 3,5 2 800 -10...+75 85 000 / 37 500 167 500 1 /2 4412 /2 HHP 285 167,7 12 7...14,5 55 6,4 13,0 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 4184 NXM 160 94,2 24 12...30 44 5,3 3,5 2 800 -30...+75 85 000 / 37 500 167 500 1 4414 L 150 88,3 24 18...28 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4184 NX 180 105,9 24 12...29 49 5,7 4,5 3 200 -30...+75 85 000 / 37 500 167 500 2 /2/17 4414 M 184 108,3 24 18...28 42 5,3 4,0 3 300 -20...+70 65 000 / 32 500 130 000 2 4184 NXH 237 139,5 24 12...25 57 6,5 11,0 4 400 -30...+55 70 000 / 50 000 142 500 3 /2 4414 N 205 120,7 24 18...28 46 5,6 5,2 3 650 -20...+70 62 500 / 30 000 120 000 3 4188 NGX 160 94,2 48 36...56 44 5,3 3,8 2 800 -10...+75 85 000 / 37 500 167 500 1 4414 H 240 141,3 24 18...28 50 6,0 8,6 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4188 NXM 160 94,2 48 36...56 44 5,3 3,5 2 800 -30...+75 85 000 / 37 500 167 500 1 /12 4414 HH 285 164,8 24 16...28 55 6,4 14,0 5 000 -20...+70 50 000 / 25 000 100 000 5 4414 /2 HHP 285 167,7 24 18...28 55 6,4 12,0 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 4418 L 150 88,3 48 36...60 37 5,0 2,5 2 700 -20...+70 67 500 / 35 000 140 000 1 4418 M 184 108,3 48 36...60 42 5,3 4,2 3 300 -20...+70 65 000 / 32 500 130 000 2 4418 N 205 120,7 48 36...60 46 5,6 5,2 3 650 -20...+70 62 500 / 30 000 120 000 3 4418 H 240 141,3 48 36...60 50 6,0 8,6 4 300 -20...+70 57 500 / 27 500 110 000 4 /2 4418 /2 HHP 285 167,7 48 36...60 55 6,4 13,5 5 000 -20...+70 50 000 / 25 000 100 000 5 /2 3 140 120 100 2 80 1 60 40 20 0 20 40 60 80 100 120 CFM 40 80 120 160 200 m³/h ¤ 49 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,1 0,2 0,3 0,4 0,5 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 50 3 DC axial fans max. 440 m /h Series 4100 N High Performance 119 x 119 x 38 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, UL1007, TR 64, bared and tin-plated – Air intake over struts. Direction of rotation clockwise, seen on rotor. – Mass: 390 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 4112 NHH 260 152,9 12 9...15 60 6,8 13,3 5 000 -20...+65 70 000 / 55 000 147 500 1 4114 N/2H7P 500 294,2 24 16...30 76 8,5 90 9 500 -20...+75 57 500 / 25 000 115 000 1 /2 4112 NH3 310 182,4 12 9...15 65 7,2 21,6 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4114 N/2H8P 570 335,5 24 16...30 78 8,9 120 11 000 -20...+75 55 000 / 22 500 110 000 2 /2 4112 NH4 355 208,9 12 9...14 67 7,4 32,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 4118 N/2H7P 500 294,2 48 36...60* 76 8,5 90 9 500 -20...+75 57 500 / 25 000 115 000 1 /2 4114 NHH 260 152,9 24 16...30 60 6,8 12,4 5 000 -20...+65 70 000 / 52 500 147 500 1 /2 4118 N/2H8P 570 335,5 48 36...60* 78 8,9 120 11 000 -20...+75 55 000 / 22 500 110 000 2 /2 4114 NH3 310 182,4 24 16...30 65 7,2 19,5 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4114 NH4 355 208,9 24 16...30 67 7,4 30,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 4114 NH5 390 229,5 24 16...30 70 7,6 45,0 7 500 -20...+65 62 500 / 35 000 125 000 4 /2 4114 NH6 440 259,0 24 16...30 73 8,1 65,0 8 400 -20...+65 60 000 / 32 500 120 000 5 /2 4118 NHH 260 152,9 48 36...60 60 6,8 12,0 5 000 -20...+65 70 000 / 52 500 147 500 1 /2 4118 NH3 310 182,4 48 36...60 65 7,2 20,0 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4118 NH4 355 208,9 48 36...60 67 7,4 28,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 4118 NH5 390 229,5 48 36...60 70 7,6 45,0 7 500 -20...+65 62 500 / 35 000 125 000 4 /2 4118 NH6 440 259,0 48 36...60 73 8,1 62,0 8 400 -20...+65 60 000 / 32 500 120 000 5 /2 600 5 500 400 4 300 200 350 100 3 300 0 50 100 150 200 250 CFM 100 200 300 400 m³/h 250 2 200 150 1 100 50 0 50 100 150 200 250 CFM 100 200 300 400 m³/h 50 H H NN AA PP GG II PPWM WM TT  Pa [in H O] 0,2 0,4 0,6 0,8 1,0 1,2 2 Air flow  Pa [in H O] 0,4 0,8 1,2 1,6 2,0 2 Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 51 3 DC axial fans max. 570 m /h Series 4100 N High Performance 119 x 119 x 38 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Available as standard with PWM control input and speed signal, additional inputs and outputs on request. 3-phase fan drive with high degree of running smoothness. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Protected against reverse polarity and locking. – Connection via single strands AWG 20, sensor and control leads AWG 22, UL1007, TR 64. Bared and tin-plated. – Air intake over struts. Direction of rotation clockwise, seen on rotor. – Mass: 425 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 4112 NHH 260 152,9 12 9...15 60 6,8 13,3 5 000 -20...+65 70 000 / 55 000 147 500 1 4114 N/2H7P 500 294,2 24 16...30 76 8,5 90 9 500 -20...+75 57 500 / 25 000 115 000 1 /2 4112 NH3 310 182,4 12 9...15 65 7,2 21,6 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4114 N/2H8P 570 335,5 24 16...30 78 8,9 120 11 000 -20...+75 55 000 / 22 500 110 000 2 /2 4112 NH4 355 208,9 12 9...14 67 7,4 32,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 4118 N/2H7P 500 294,2 48 36...60* 76 8,5 90 9 500 -20...+75 57 500 / 25 000 115 000 1 /2 4114 NHH 260 152,9 24 16...30 60 6,8 12,4 5 000 -20...+65 70 000 / 52 500 147 500 1 /2 4118 N/2H8P 570 335,5 48 36...60* 78 8,9 120 11 000 -20...+75 55 000 / 22 500 110 000 2 /2 4114 NH3 310 182,4 24 16...30 65 7,2 19,5 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 *36...72 VDC on request. 4114 NH4 355 208,9 24 16...30 67 7,4 30,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 Speed control range from 500 RPM up to maximum nominal speed. Stationary at 0 % PWM, 4114 NH5 390 229,5 24 16...30 70 7,6 45,0 7 500 -20...+65 62 500 / 35 000 125 000 4 /2 maximum speed at sensor break. 4114 NH6 440 259,0 24 16...30 73 8,1 65,0 8 400 -20...+65 60 000 / 32 500 120 000 5 /2 To attain the specified service life, an external capacitor must be wired between the plus and minus strands. Please note the wiring suggestion on page 22. 4118 NHH 260 152,9 48 36...60 60 6,8 12,0 5 000 -20...+65 70 000 / 52 500 147 500 1 /2 4118 NH3 310 182,4 48 36...60 65 7,2 20,0 6 000 -20...+65 65 000 / 37 500 132 500 2 /2 4118 NH4 355 208,9 48 36...60 67 7,4 28,0 6 800 -20...+65 62 500 / 35 000 125 000 3 /2 4118 NH5 390 229,5 48 36...60 70 7,6 45,0 7 500 -20...+65 62 500 / 35 000 125 000 4 /2 4118 NH6 440 259,0 48 36...60 73 8,1 62,0 8 400 -20...+65 60 000 / 32 500 120 000 5 /2 2 1200 1000 1 800 600 400 200 0 50 100 150 200 250 300 CFM 100 200 300 400 500 m³/h ¤ 51 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,8 1,6 2,4 3,2 4,0 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 52 3 max. 275 m /h DC diagonal fans Series DV 4100 119 x 119 x 38 mm Highlights: – Diagonal compact fan with low noise and high pressure saddle. – Very rigid compression curve for high air flow at high back pressure. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64, bared and tin-plated – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 375 g (with aluminium housing : 455 g). Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 DV 4112 N 280 164,7 12 9...15 61 6,9 21,0 6 000 -20...+65 70 000 / 40 000 142 500 1 5212 NM 187 110,1 12 7...14,5 43 5,3 4,6 2 750 -20...+75 62 500 / 27 500 122 500 1 5212 NN 216 127,1 12 7...14 46 5,6 6,0 3 150 -20...+75 57 500 / 25 000 112 500 2 DV 4114 N 280 164,7 24 16...30 61 6,9 20,5 6 000 -20...+65 70 000 / 40 000 142 500 1 /2 5212 NH 252 148,3 12 7...14 51 6,0 9,8 3 650 -20...+70 45 000 / 22 500 90 000 3 DV 4118 N 280 164,7 48 36...60 61 6,9 20,0 6 000 -20...+65 70 000 / 40 000 142 500 1 5212 NHH* 340 200,0 12 9...15 58 6,6 19,0 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 5214 NM 187 110,1 24 12...28 43 5,3 4,6 2 750 -20...+75 62 500 / 27 500 122 500 1 5214 NN 216 127,1 24 12...28 46 5,6 6,0 3 150 -20...+75 57 500 / 25 000 112 500 2 /2 5214 NH 252 148,3 24 12...28 51 6,0 9,8 3 650 -20...+70 45 000 / 22 500 90 000 3 /2 5214 NHH* 340 200,0 24 16...30 58 6,6 17,5 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 5218 NM 187 110,1 48 40...56 43 5,3 5,0 2 750 -20...+75 62 500 / 27 500 122 500 1 5218 NN 216 127,1 48 40...56 46 5,6 6,5 3 150 -20...+65 57 500 / 32 500 112 500 2 5218 NH 252 148,3 48 40...56 51 6,0 10,0 3 650 -20...+55 45 000 / 32 500 90 000 3 5218 NHH* 340 200,0 48 36...60 58 6,6 18,0 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 1 300 250 200 150 100 50 0 30 60 90 120 150 CFM 50 100 150 200 250 m³/h 52 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,2 0,4 0,6 0,8 1,0 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 53 3 max. 338 m /h DC axial fans Series 5200 N 127 x 127 x 38 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 310 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 DV 4112 N 280 164,7 12 9...15 61 6,9 21,0 6 000 -20...+65 70 000 / 40 000 142 500 1 5212 NM 187 110,1 12 7...14,5 43 5,3 4,6 2 750 -20...+75 62 500 / 27 500 122 500 1 5212 NN 216 127,1 12 7...14 46 5,6 6,0 3 150 -20...+75 57 500 / 25 000 112 500 2 DV 4114 N 280 164,7 24 16...30 61 6,9 20,5 6 000 -20...+65 70 000 / 40 000 142 500 1 /2 5212 NH 252 148,3 12 7...14 51 6,0 9,8 3 650 -20...+70 45 000 / 22 500 90 000 3 DV 4118 N 280 164,7 48 36...60 61 6,9 20,0 6 000 -20...+65 70 000 / 40 000 142 500 1 5212 NHH* 340 200,0 12 9...15 58 6,6 19,0 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 5214 NM 187 110,1 24 12...28 43 5,3 4,6 2 750 -20...+75 62 500 / 27 500 122 500 1 5214 NN 216 127,1 24 12...28 46 5,6 6,0 3 150 -20...+75 57 500 / 25 000 112 500 2 /2 5214 NH 252 148,3 24 12...28 51 6,0 9,8 3 650 -20...+70 45 000 / 22 500 90 000 3 /2 5214 NHH* 340 200,0 24 16...30 58 6,6 17,5 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 5218 NM 187 110,1 48 40...56 43 5,3 5,0 2 750 -20...+75 62 500 / 27 500 122 500 1 5218 NN 216 127,1 48 40...56 46 5,6 6,5 3 150 -20...+65 57 500 / 32 500 112 500 2 5218 NH 252 148,3 48 40...56 51 6,0 10,0 3 650 -20...+55 45 000 / 32 500 90 000 3 5218 NHH* 340 200,0 48 36...60 58 6,6 18,0 4 900 -20...+65 45 000 / 25 000 90 000 4 /2 *Models NHH: Fan housing with moulded-in spacers. 4 200 150 3 100 2 1 50 0 40 80 120 160 200 CFM 100 200 300 m³/h ¤ 53 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,2 0,4 0,6 0,8 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 54 3 max. 324 m /h DC diagonal fans Series DV 5200 127 x 127 x 38 mm Highlights: – Diagonal fan with lower operating noise at high pressures. – Very rigid compression curve for high air flow at high back pressure. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – DV 5214 /2HP with PWM control input and speed signal, additional inputs and outputs on request. General characteristics: – Material: housing of fibreglass-reinforced plastic, optionally of aluminium. Metal flange. Impeller of fibreglass-reinforced plastic PA; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64, bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 415 g (with metal housing: 490 g). Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-112 DV 5212 N 270 158,9 12 9...15 56 6,4 21,0 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5112 N 250 147,1 12 6...15 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2 DV 5214 N 270 158,9 24 16...30 56 6,4 20,4 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5114 N 250 147,1 24 12...30 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2 DV 5218 N 270 158,9 48 36...60 56 6,4 18,5 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5118 N 250 147,1 48 24...60 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2/12 Model comes standard with speed signal and PWM control input. Other versions by request. DV 5214 /2HP 320 188,2 24 16...30 62 7,2 38,5 6 000 -20...+65 62 500 / 35 000 125 000* 2 Speed control range from 1000 RPM up to maximum nominal speed. Stationary at 0 % PWM, maximum speed at sensor break. 2 400 300 1 200 100 0 25 50 75 100 125 150 175 CFM 50 100 150 200 250 m³/h 54 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,4 0,8 1,2 1,6 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 55 3 max. 250 m /h DC axial fans Series 5100 N 135 x 135 x 38 mm General characteristics: – Material for aluminium housing and impeller; housing with grounding lug for screw M4 x 8 (Torx). 48 V version incl. screws. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64, bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 650 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-112 DV 5212 N 270 158,9 12 9...15 56 6,4 21,0 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5112 N 250 147,1 12 6...15 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2 DV 5214 N 270 158,9 24 16...30 56 6,4 20,4 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5114 N 250 147,1 24 12...30 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2 DV 5218 N 270 158,9 48 36...60 56 6,4 18,5 5 000 -20...+65 70 000 / 40 000 142 500 1 /2 5118 N 250 147,1 48 24...60 48 6,1 9,5 2 900 -25...+72 80 000 / 37 500 157 500 1 /2/12 DV 5214 /2HP 320 188,2 24 16...30 62 7,2 38,5 6 000 -20...+65 62 500 / 35 000 125 000* 2 1 80 60 40 20 0 25 50 75 100 125 CFM 50 100 150 200 m³/h ¤ 55 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,1 0,2 0,3 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 56 3 max. 338 m /h DC axial fans Series 5300 140 x 140 x 51 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Available as standard with PWM control input and speed signal. Additional inputs and outputs on request. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air intake over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 900 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 NEW 5314 /2HP 340 200 24 16...28 64 7,2 28,4 5 000 -20...+65 77 500/40 000 160 000 1 5312 /2 TDHP 410 241,3 12 8...16 70 7,7 43 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 NEW 5318 /2HP 340 200 48 36...72 64 7,2 27 5 000 -20...+65 77 500/40 000 160 000 1 5314 /2 TDHP 410 241,3 24 16...36 70 7,7 42 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 5314 /2 TDHHP 490 288,4 24 16...36 75 8,1 67 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 Speed control range from 700 RPM up to maximum nominal speed. Stationary at 0 % PWM, 5318 /2 TDHP 410 241,3 48 36...72 70 7,7 42 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 maximum speed at sensor break. 5318 /2 TDHHP 490 288,4 48 36...72 75 8,1 66 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 5318 /2 TDH4P 670 394,3 48 36...72 79 8,8 149 9 200 -20...+65 57 500 / 32 500 115 000 3 /2 1 300 250 200 150 100 50 0 25 50 75 100 125 150 175 CFM 50 100 150 200 250 m³/h 56 ¤ H H NN IP54 IP54 AA PP GG PPWM WM TT II  Pa [in H O] 0,2 0,4 0,6 0,8 1,0 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 57 3 max. 670 m /h DC axial fans Series 5300 TD 140 x 140 x 51 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Standard with PWM control input and speed signal, additional inputs and outputs on request. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Protected against reverse polarity and locking. – Connection via single strands AWG 20, TR 64. Bared and tin-plated. – Air intake over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 900 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 5314 /2HP 340 200 24 16...28 64 7,2 28,4 5 000 -20...+65 77 500/40 000 160 000 1 5312 /2 TDHP 410 241,3 12 8...16 70 7,7 43 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 5318 /2HP 340 200 48 36...72 64 7,2 27 5 000 -20...+65 77 500/40 000 160 000 1 5314 /2 TDHP 410 241,3 24 16...36 70 7,7 42 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 5314 /2 TDHHP 490 288,4 24 16...36 75 8,1 67 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 5318 /2 TDHP 410 241,3 48 36...72 70 7,7 42 6 000 -20...+70 70 000 / 35 000 140 000 1 /2 5318 /2 TDHHP 490 288,4 48 36...72 75 8,1 66 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 5318 /2 TDH4P 670 394,3 48 36...72 79 8,8 149 9 200 -20...+65 57 500 / 32 500 115 000 3 /2 Speed control range from 1000 RPM up to maximum nominal speed. Stationary at 0 % PWM, maximum speed at sensor break. 3 1200 1000 800 2 600 1 400 200 0 50 100 150 200 250 300 350 400 CFM 100 200 300 400 500 600 m³/h 57 H H NN AA PP GG II PPWM WM TT Pa  [in H O] 0,8 1,6 2,4 3,2 4,0 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 58 3 max. 420 m /h DC axial fans Series 7100 N 150 Ø x 38 mm General characteristics: – Material: Aluminium housing and impeller; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64, bared and tin-plated. – Air intake over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 620 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 7112 N 360 211,9 12 6...15 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 7212 N 360 211,9 12 6...15 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 /2 7114 N 360 211,9 24 12...30 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 7214 N 360 211,9 24 12...30 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 /12/17/19 7114 NH 420 247,2 24 12...26,5 59 7,0 19,0 3 350 -25...+72 75 000 / 35 000 147 500 2 7218 N 360 211,9 48 24...60 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 7118 N 360 211,9 48 24...60 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 Strand fastened using cable tie; cable tie protrudes 1 mm. 2 175 150 125 1 100 75 50 25 0 40 80 120 160 200 CFM 100 200 300 m³/h 58 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,1 0,2 0,3 0,4 0,5 0,6 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 59 3 max. 360 m /h DC axial fans Series 7200 N 150 Ø x 55 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64, bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 725 g. Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110-116 7112 N 360 211,9 12 6...15 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 7212 N 360 211,9 12 6...15 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 /2 7114 N 360 211,9 24 12...30 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 7214 N 360 211,9 24 12...30 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 /12/17/19 7114 NH 420 247,2 24 12...26,5 59 7,0 19,0 3 350 -25...+72 75 000 / 35 000 147 500 2 7218 N 360 211,9 48 24...60 53 6,2 12,0 3 050 -25...+72 80 000 / 37 500 157 500 1 7118 N 360 211,9 48 24...60 55 6,5 12,0 2 850 -25...+72 80 000 / 37 500 157 500 1 /2 1 125 100 75 50 25 0 40 80 120 160 200 CFM 100 200 300 m³/h ¤ 59 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II  Pa [in H O] 0,1 0,2 0,3 0,4 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:26 Seite 60 3 max. 350 m /h DC axial fans Series 6100 N 172 x 160 x 52 mm Highlights: – Compact, lightweight plastic housing. – VARIOFAN models available with external temperature sensor. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Open loop speed control, sensor and alarm signal available on request. General characteristics: – Material: housing and impeller of fibreglass-reinforced PA. – Fully integrated electronic commutation. – Protected against locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 610 g. Nominal data Nominal data 3 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours NEW 6112 NM 350 206 12 8...15 49 5,9 11 2 850 -20...+70 80 000/37 500 157 500 1 NEW 6314 /2MP 395 232,4 24 16...30 51 6,0 13 3 600 -20...+75 82 500/32 500 165 000 1 NEW 6314 /2NP 470 276,5 24 16...30 56 6,5 23 4 400 -20...+70 80 000/40 000 160 000 2 NEW 6114 NM 350 206 24 12...32 49 5,9 11 2 850 -20...+70 80 000/37 500 157 500 1 NEW 6314 /2HP 545 320,6 24 16...30 58 6,9 31 5 000 -20...+65 77 500/42 500 155 000 3 NEW 6318 /2HP 545 320,6 48 36...72 58 6,9 32 5 000 -20...+65 77 500/42 500 155 000 3 150 1 125 100 75 50 25 0 40 80 120 160 200 CFM 100 200 300 m³/h 60 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa  [in H O] 0,1 0,2 0,3 0,4 0,5 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:12 Seite 61 3 max. 545 m /h DC axial fans Series 6300 172 Ø x 51 mm Highlights: – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Available as standard with PWM control input and speed signal. Additional inputs and outputs on request. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 910 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours NEW 6314 /2MP 395 232,4 24 16...30 51 6,0 13 3 600 -20...+75 82 500/32 500 165 000 1 NEW 6314 /2NP 470 276,5 24 16...30 56 6,5 23 4 400 -20...+70 80 000/40 000 160 000 2 NEW 6314 /2HP 545 320,6 24 16...30 58 6,9 31 5 000 -20...+65 77 500/42 500 155 000 3 NEW 6318 /2HP 545 320,6 48 36...72 58 6,9 32 5 000 -20...+65 77 500/42 500 155 000 3 Speed control range from 700 RPM up to maximum nominal speed. Stationary at 0 % PWM, maximum speed at sensor break. 500 3 400 2 300 1 200 100 0 50 100 150 200 250 300 [CFM] 3 100 200 300 400 500 [m /h] ¤ 61 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II [Pa] 0,25 0,5 0,75 1 1,25 1,5 1,75 2 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:12 Seite 62 3 max. 950 m /h DC axial fans Series 6300 TD 172 Ø x 51 mm Highlights: – 3-phase fan drive high degree of running smoothness. – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Standard with PWM control input and speed signal, additional inputs and outputs on request. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Protected against reverse polarity and locking. – Connection via single strands AWG 20, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 910 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 6312 /2TDHP 600 353,1 12 8...16 60 7,3 40 5 500 -20...+70 75 000 / 37 500 150 000 1 /2 NEW 6314 /2TDHP-298 600 353,1 24 16...28 60 7,3 42 5 500 -20...+65 75 000 / 42 500 150 000 1 NEW 6314 /2TDHP 600 353,1 24 16...36 60 7,3 40 5 500 -20...+70 75 000 / 37 500 150 000 1 /2 6314 /2TDHHP 710 417,9 24 16...36 69 7,9 67 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 NEW 6318 /2TDHP-299 600 353,1 48 36...56 60 7,3 42 5 500 -20...+65 75 000 / 42 500 150 000 1 NEW 6318 /2TDHP 600 353,1 48 36...72 60 7,3 40 5 500 -20...+70 75 000 / 37 500 150 000 1 /2 6318 /2TDHHP 710 417,9 48 36...72 69 7,9 67 7 000 -20...+70 62 500 / 30 000 120 000 2 /2 6318 /2TDH4P 950 559,1 48 36...72 75 8,4 150 9 200 -20...+65 52 500 / 30 000 107 500 3 /2 Speed control range from 1000 RPM up to maximum nominal speed. Stationary at 0 % PWM, maximum speed at sensor break. 3 1000 800 2 600 1 400 200 0 100 200 300 400 500 600 CFM 200 400 600 800 1000 m³/h 62 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,8 1,6 2,4 3,2 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:12 Seite 63 3 max. 950 m /h DC axial fans Series 6300 TD 172 x 160 x 51 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very rigid compression curve for high air flow at high back pressure. – Low operating noise level at high back pressure. – Standard with PWM control input and speed signal, additional inputs and outputs on request. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). – Protected against reverse polarity and locking. – Connection via single strands AWG 20, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 910 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours NEW 6314 /2TDHHP-015 710 415,0 24 16...36 69 7,9 67 7 000 -20...+70 62 500 / 30 000 120 000 1 NEW 6318 /2TDH4P-007 950 560,0 48 36...72 75 8,4 150 9 200 -20...+65 52 500 / 30 000 107 500 2 *Vorläufig Speed control range from 1000 RPM up to maximum nominal speed. Stationary at 0 % PWM, maximum speed at sensor break. 2 1000 800 1 600 400 200 0 100 200 300 400 500 600 CFM 200 400 600 800 1000 m³/h ¤ 63 H H SS NN IP54 IP54 AA PP PP GG II PPWM WM TT Pa [in H O] 0,8 1,6 2,4 3,2 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:12 Seite 64 3 max. 540 m /h DC diagonal fans Series DV 6200 172 Ø x 51 mm Highlights: – Diagonal compact fan with low noise and high pressure saddle. – Very rigid compression curve for high air flow at high back pressure. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). 48 V version incl. screws. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 820 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/112 DV 6224 540 317,8 24 16...28 63 7,1 40,0 4 300 -20...+75 90 000 / 40 000 180 000 1 /2/12 DV 6248 540 317,8 48 28...60 63 7,1 40,0 4 300 -20...+75 90 000 / 40 000 180 000 1 1 350 300 250 200 150 100 50 0 50 100 150 200 250 300 CFM 100 200 300 400 500 600 m³/h 64 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,2 0,4 0,6 0,8 1,0 1,2 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 65 3 max. 700 m /h DC diagonal fans Series DV 6200 TD TURBOFAN 172 Ø x 51 mm Highlights: – Diagonal compact fan with low noise and high pressure saddle. – 3-phase fan drive with high degree of running smoothness. – Very rigid compression curve for high air flow at high back pressure. – Control inputs, alarm and speed signals available on request. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). 48 V version incl. screws. – Fully integrated electronic commutation. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 820 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. DV 6224 TD 700 421,0 24 16...36 69 7,8 89,0 5 500 -20...+60 65 000 / 40 000 130 000 2 DV 6248 TD 700 421,0 48 40...55 69 7,8 89,0 5 500 -20...+60 65 000 / 40 000 130 000 2 min 100 58,9 29 — 2,0 800 1 P. 110-116 DV 6224 TD... 24 16...36 -20...+60 65 000 130 000 and120, max 700 421,0 69 7,8 89,0 5 500 2 121,123 P. 110-116 100 58,9 29 — 2,0 800 1 min and120, DV 6248 TD... 48 40...55* -20...+60 65 000 / 40 000 130 000 max 700 421,0 69 7,8 89,0 5 500 2 121,123 *Fan with extended voltage range available on request. Models DV 6224 TD... and DV 6248 TD... are available in customer-specific, custom-developed variants only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs beginning on page 107. 2 600 500 400 300 200 100 1 n nmin max 0 100 200 300 400 CFM 100 200 300 400 500 600 m³/h ¤ 65 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,4 0,8 1,2 1,6 2,0 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 66 3 max. 480 m /h DC axial fans Series 6400 172 x 150 x 51 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). 48 V version incl. screws. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Electrical connection with flat plugs 3 x 0.5 mm. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 760 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110/112 6412 M 350 206,0 12 8...15 52 6,0 12,0 2 850 -20...+72 80 000 / 37 500 157 500 1 6424 M 350 206,0 24 12...32 52 6,0 12,0 2 850 -20...+72 80 000 / 37 500 157 500 1 6424 410 241,3 24 12...28 57 6,4 18,0 3 400 -20...+72 75 000 / 35 000 125 000 2 /2 6424 H 480 282,5 24 12...28 63 7,1 26,0 4 000 -20...+55* 70 000 / 50 000 110 000 3 /12 6448 410 241,3 48 28...60 57 6,4 17,0 3 400 -20...+72 75 000 / 35 000 125 000 2 6448 H* 480 282,5 48 28...60 63 7,1 26,0 4 000 -20...+55** 70 000 / 50 000 110 000 3 * Leads 310 mm. ** 72 °C upon request. 3 175 150 2 125 100 1 75 50 25 0 50 100 150 200 250 CFM 100 200 300 400 m³/h 66 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,1 0,2 0,3 0,4 0,5 0, 0,6 6 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 67 3 max. 900 m /h DC axial fans Series 6400 TD TURBOFAN 172 x 150 x 51 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very rigid compression curve for high air flow at high back pressure. – Control inputs, alarm and speed signals available on request. – Optionally available with reversible speed. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). 48 V version incl. screws. – Fully integrated electronic commutation. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. Direction of rotation reversible. – Mass: 760 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 90 53,0 18 — 2,0 800 1 min 6424 TD... 24 16...28 -20...+60 70 000 / 45 000 110 000 max 600 353,1 65 7,4 50,0 5 100 2 90 53,0 18 — 2,0 800 1 P. 110-116 min 6448 TD... 48 40...55* -20...+60 70 000 / 45 000 110 000 and120, max 600 353,1 65 7,4 50,0 5 100 2 121,123 P. 110-116 90 53,0 18 — 2,0 800 1 min and120, 6448 TDHH... 48 36...72 -20...+60 70 000 / 45 000 110 000 max 121,123 900 529,7 78 8,6 163,0 7500 3 *Fan with extended voltage range available on request. Models DV 6224 TD... and DV 6248 TD... are available in customer-specific, custom-developed variants only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs beginning on page 108. 3 800 700 600 500 2 400 300 200 100 1 nmin nmax 0 100 200 300 400 500 CFM 150 300 450 600 750 900 m³/h ¤ 67 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,4 0,8 1,2 1,6 2,0 2,4 2,8 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 68 3 max. 530 m /h DC diagonal fans Series DV 6400 172 x 160 x 51 mm Highlights: – Diagonal compact fan with low noise and high pressure saddle. – Very rigid compression curve for high air flow at high back pressure. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). 48 V version incl. screws. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Mass: 820 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 112 DV 6424 530 311,9 24 16...28 65 7,3 40,0 4 300 -20...+75 90 000 / 45 000 180 000 1 /12 DV 6448 530 311,9 48 28...60 65 7,3 40,0 4 300 -20...+75 90 000 / 45 000 180 000 1 /12 1 350 300 250 200 150 100 50 0 60 120 180 240 300 CFM 100 200 300 400 500 m³/h 68 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,2 0,4 0,6 0,8 1,0 1,2 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 69 3 max. 680 m /h DC diagonal fans Series DV 6400 TD TURBOFAN 172 x 160 x 51 mm Highlights: – Diagonal compact fan with low noise and high pressure saddle. –3-phase fan drive with high degree of running smoothness. – Very rigid compression curve for high air flow at high back pressure. – Control inputs, plus alarm and speed signals available on request. – Optionally available with reversible speed. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8 (Torx). 48 V version incl. screws. – Fully integrated electronic commutation. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. Direction of rotation reversible. – Mass: 820 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. DV 6424 TD 680 400,2 24 16...28 71 7,9 91,0 5 500 -20...+60 65 000 / 40 000 130 000 2 100 58,9 29 — 2,0 800 1 min P. 110-116 DV 6424 TD... 24 16...28 -20...+60 65 000 / 40 000 130 000 and120, max 680 400,2 71 7,9 91,0 5 500 2 121,123 P. 110-116 100 58,9 29 — 2,0 800 1 min and120, DV 6448 TD... 48 40...55 -20...+60 65 000 / 40 000 130 000 max 121,123 680 400,2 71 7,9 86,0 5 500 2 Models DV 6424 TD... and DV 6448 TD... are available in customer-specific, custom-developed variants only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs beginning on page 108. 2 600 500 400 300 200 100 1 n n min max 0 100 200 300 CFM 100 200 300 400 500 600 m³/h ¤ 69 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,4 0,8 1,2 1,6 2,0 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 70 3 max. 1220 m /h DC axial fans Series 2200 FTD 220 x 200 x 51 mm Highlights: – High- performance 200 mm fan with compact overall height. – Low operating noise level at high back pressure. – 3-phase fan drive high degree of running smoothness and high efficiency. – Standard with speed signal and PWM (P) or 0-10VDC / PWM (O) speed control. General characteristics: – Material: aluminium housing, fibreglass-reinforced PA impeller; housing with grounding lug for screw M4 x 8. – Electronic commutation fully integrated. – Protected against reverse polarity and locking. – Connection via single strands AWG 20, UL 1007 / AWG 22, UL 1061, bared and tin-plated. – Air exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. –Mass: 1000 g. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours Hours P. 110 NEW 2214 F/2TDHO 790 464,7 24 16...30 62 7,1 35,0 4250 -25...+75 90 000 / 42 500 180 000 1 /2 NEW 2214 F/2TDHHO 940 552,9 24 16...36 66 7,4 35,0 5000 -25...+70 85 000 / 42 500 170 000 2 /2 NEW 2218 F/2TDHO 790 464,7 48 36...57 62 7,1 48,0 4250 -25...+75 90 000 / 42 500 180 000 1 /2 NEW 2218 F/2TDHHO 940 552,9 48 36...72 66 7,4 48,0 5000 -25...+70 85 000 / 42 500 170 000 2 /2 NEW 2218 F/2TDH4P 1220 717,6 48 36...72 72 8,2 103,0 6500 -20...+65 70 000 / 40 000 140 000 3 /2 Speed control range from 1000 RPM up to maximum nominal speed. Stationary at 0 % PWM / 0 V, Type O: stationary at sensor break; Type P: maximum speed at sensor break. 3 800 2 600 400 1 200 0 100 200 300 400 500 600 CFM 200 400 600 800 1000 m³/h 70 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 71 3 max. 1090 m /h DC axial fans W1G 200 225 x 225 x 80 mm – Material: Die-cast aluminium wall ring, 9 sheet steel blades. Blades and rotor coated in black. – Protected against reverse polarity and locking. – Direction or air flow: “V”, exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Type of protection: IP 42. Insulation class: “B”. – Maintenance-free ball bearings. – Control input 0-10 V DC / PWM and tach output. – Electrical connection with terminal strip. – Continuous operation (S1). – Mass: 2.1 kg. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours W1G 200-HH77-52 1090 641,6 24 16...28 60 — 55,0 2 950 -25...+60 57 000 / 42 000 1 W1G 200-HH01-52 1090 641,6 48 36...57 60 — 55,0 2 950 -25...+60 57 000 / 42 000 1 nP Lp 1 A [RPM] [W] [dB(A)] 
’ 2300 73 63   ’ 2970 77 62   ’ 3100 80 63   ’ 2970 80 66 
2950 55 60   2890 58 60   2800 61 61   2780 63 64  2270 27 55  2230 28 54   2170 29 54   2130 30 57 11 240 200 160 U R U N 120 4' 4 3' 3 80 8 2' 7 2 40 6 5 1 1' 0 200 400 600 CFM 200 400 600 800 1000 m³/h 71 Pa [in H O] 0,2 0,4 0,6 0,8 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Curve Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information 288 + 0,5 276 - Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 72 3 max. 1245 m /h DC diagonal module K1G 200 225 x 225 x 80 mm – Material: Housing made of fibreglass-reinforced PA6 plastic, seven blades made of fibre- glass-reinforced PA6 plastic. Rotor coated in black – Protected against reverse polarity and locking. – Direction of air flow “V”. Direction of rotation CW, seen on rotor. – Type of protection: IP 20 (... 02); IP 44 (... 04). Insulation class: “B”. – Maintenance-free ball bearings. – Control input 0-10 VDC / PWM and tach output. – Electrical connection via connection line AWG 20, 4x brass lead tips crimped. – Continuous operation (S1). – Mass: 1.7 kg. Nominal data 3 Type m /h CFM VDC VDC A dB(A) / Watts RPM °C Hours NEW K1G 200-AD65-04 1020 600,3 24 16...28 4,7 76 95 3 400 -25...+60 67 000 / 33 000 1 NEW K1G 200-AD31-02 1045 614,9 24 16...28 5,3 77 107 3 520 -25...+70 100 000 / 50 000 2 NEW K1G 200-AD49-04 1095 644,4 48 36...57 3,4 77 120 3 650 -25...+60 80 000 / 32 000 3 K1G 200-AD37-02 1245 732,7 48 36...57 5,6 81 183 4 140 -25...+70 75 000 / 30 000 4 NEW Air performance measured nP I Lw 1 A as per: ISO 5801, [RPM] [W] [A] [dB(A)] Installation category A, 
3400 95 4,70 76 without protection against   3410 116 5,61 74 accidental contact   3410 119 5,75 74   3410 117 5,62 76 Suction-side noise levels: 
3520 107 5,30 77 Lw as per ISO 13347   Cable assignment: 3520 127 6,24 75 A   3520 129 6,31 76 Red = UN The acoustic values given are   3520 126 6,18 76 Yellow = 0-10 VDC only valid under the measur- 
3650 120 3,40 77 White = Speed monitoring output ment conditions listed and   3650 141 3,90 75 Blue = GND may vary depending on the   3650 145 3,99 76 installation situation.   3650 141 3,88 78 
4140 183 5,60 81 With any deviation to the stan-   4090 212 6,46 79 dard setup, the specific values   4060 213 6,52 79 have to be checked and re-   4110 211 6,43 80 viewed once installed or fitted! 4 4 500 3 4 2 3 400 1 4 4 3 300 3 3 2 2 200 2 2 6 100 6 11 1 1 + + 1 80 0 [CFM] 100 200 300 400 500 600 3 200 400 600 800 1000 [m /h] 72 [Pa] 0,4 0,8 1,2 1,6 2,0 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Current draw Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Curve 288 + 0, 5 276 - Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 73 3 max. 1640 m /h DC diagonal module K3G 200 225 x 225 x 89 mm – Material: Housing made of fibreglass-reinforced PA6 plastic, seven blades made of fibre- glass-reinforced PA6 plastic. Rotor coated in black – Protected against reverse polarity and locking. – Direction of air flow “V”. Direction of rotation CW, seen on rotor. – Type of protection: IP 20 (... 02); IP 44 (... 04). Insulation class: “B”. – Maintenance-free ball bearings. – Control input 0-10 VDC / PWM and tach output. – Electrical connection via connection line AWG 16, 4x crimped core-end sleeves. – Continuous operation (S1). – Mass: 2.2 kg. Nominal data 3 Type m /h CFM VDC VDC A dB(A) / Watts RPM °C Hours NEW K3G 200-BDA3-04 1215 716,0 24 16...28 7,7 81 185 4 060 -25...+60 55 000 / 31 000 1 NEW K3G 200-BDA1-02 1215 716,0 24 16...28 7,7 81 185 4 060 -25...+65 60 000 / 32 000 1 NEW K3G 200-BDA4-04 1550 911,0 48 36...57 7,1 86 339 5 140 -25...+60 52 000 / 32 000 2 K3G 200-BDA2-02 1640 965,0 48 36...57 8,7 87 418 5 480 -25...+60 40 000 / 22 000 3 NEW Air performance measured nP I Lw 1 A as per: ISO 5801, [RPM] [W] [A] [dB(A)] Installation category A, 
4060 185 7,70 81 without protection against   4010 204 8,48 78 accidental contact   4010 209 8,70 78   4020 208 8,66 79 Suction-side noise levels: 
5140 339 7,10 86 Lw as per ISO 13347   Cable assignment: 5070 373 7,78 83 A   5060 385 8,01 83 Red = UN The acoustic values given are   5080 380 7,91 84 Yellow = 0-10 VDC only valid under the measur- 
5480 418 8,70 87 White = Speed monitoring output ment conditions listed and   5250 421 8,77 84 Blue = GND may vary depending on the   5190 422 8,78 83 installation situation.   5240 421 8,77 85 With any deviation to the stan- dard setup, the specific values have to be checked and re- viewed once installed or fitted! 3 2 4 800 4 700 3 600 3 1 500 4 2 400 2 3 300 2 200 100 6 1 1 1 + + 89 1 0 [CFM] 200 400 600 800 3 400 800 1200 1600[m /h] 73 [Pa] 0,4 0,8 1,2 1,6 2,0 2,4 2,8 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Current draw Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Curve Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 74 3 max. 1920 m /h DC axial fans W1G 250 280 x 280 x 80 mm – Material: Die-cast aluminium wall ring, 7 sheet steel blades. Blades and rotor coated in black. – Protected against reverse polarity and locking. – Direction or air flow: “V”, exhaust over struts. Direction of rotation counter-clockwise, seen on rotor. – Type of protection: IP 42. Insulation class: “B”. – Maintenance-free ball bearings. – Control input 0-10 V DC / PWM and tach output. – Electrical connection with terminal strip. – Continuous operation (S1). – Mass: 2.4 kg. Nominal data 3 Type m /h CFM VDC VDC dB(A) Bel(A) / Watts RPM °C Hours W1G 250-HH37-52 1920 1130,1 24 16...28 70 — 105,0 2 750 -25...+60 57 000 / 38 000 1 W1G 250-HH67-52 1920 1130,1 48 36...57 70 — 105,0 2 750 -25...+60 57 000 / 38 000 1 nP Lp 1 A [RPM] [W] [dB(A)] 
’ 2920 129 71   ’ 2800 132 72   ’ 2680 135 71   ’ 2600 139 72 
2750 105 70   2630 110 69   2520 111 69   2440 114 70  2610 73 66  2320 75 67   2230 78 67   2170 80 68 12 200 U R 160 4' U N 4 120 8 3' 3 80 7 2' 2 40 6 1' 5 1 0 400 800 [CFM] 400 800 1200 1600 m³/h 74 Pa 0,2 0,4 0,6 0,8 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Curve Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 75 DC centrifugal fans DC centrifugal fan overview 77 DC centrifugal fans 79 DC tangential fans 105 75 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 76 DC fans Technical information Product line Voltage range Our centrifugal product line includes fans for Many of our DC fans can be operated on volta- every application. Whether as free-running ges that are up to 50% lower and 25% higher impellers with a diameter between 97 mm and than their nominal voltage (see Voltage range in 225 mm or as assemblies in a ready-to-install, the technical tables). This enables the air per- compact housing with inlet nozzle with an edge formance to be adapted to the cooling require- length between 51 mm and 270 mm. Of cour- ments and allows the noise to be reduced, even se, all models feature high-efficiency, brushless if the fan does not have a control input. motor technology. Closed-loop speed control and monitoring Electronic protection against Closed-loop speed control and function monito- reverse polarity ring are becoming increasingly important in ebm-papst DC fans have electronically commu- many applications. ebm-papst offers many fans tated drives with electronic protection against in the standard design with a control input and reverse polarity.The electronics are conveniently open collector speed signal. located in the fan hub. S-Force centrifugal – RadiCal Product life expectancy The new S-Force centrifugal fans provide peak A distinctive feature of DC fan technology is performance among fans of this type. With air the convincingly high product life expectancy. flow capacity at over 1500 m³/h and a pressure Thanks to the excellent efficiency of the brush- build-up of up to 1000 pascals, the highest heat less drives, the thermal load of the bearings is flows are manageable. In addition, the models reduced, thus considerably increasing the life are extremely efficient due to the multi-pole, expectancy of the fans. electronically commutated drive motors and can be adapted individually to every application Protection class thanks to intelligent motor features. Some DC fans with sleeve and ball bearings are pow- models use our new, highly efficient RadiCal ered by Class E insulated motors. All ebm-papst impellers. fans conform to the requirements of Protection Class IP 20. Fans conforming to IP 54 and spe- cial protection classes are also available. 76 Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 77 Centrifugal fans for DC operation Overview of air performance 3 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 2000 3000 mm m /h 105 x 59 x 79 RV 40 18...24 79  51 x 15 RLF 35 9,6 80  76 x 27 RL 48 22...28 81 97 x 93,5 x 33 RL 65 56...61 82  121 x 37 RL 90 N 40...55 83  127 x 25 RLF 100 64...80 84  135 x 38 RG 90 N 55 85  180 x 40 RG 125 N 60...137 86  220 x 56 RG 160 N 139...209 87 NEW  220 x 56 RG 160 NTD 59...370 88  225 x 85 RG 190 TD 630...930 NEW 89  270 x 99 RG 220 TD 1090...1280 NEW 90  270 x 119 RG 225 TD 1040...1210 NEW 91 NEW Ø 97 x 41 RET 97 TD 220 92 Ø 104 x 25 REF 100 86...104 93 Ø 101 x 52 RER 101 190 94 NEW Ø 120 x 54 RER 120 TD 320...390 95 Ø 138 x 35 RER 125 N 74...166 96 Ø 133 x 91 RER 133 TD 460...565 NEW 97 Ø 165 x 51 RER 160 N 255 98 Ø 165 x 51 RER 160 NTD 66...354 NEW 99 Ø 175 x 55 REF 175 TD 800 NEW 100 NEW Ø 175 x 69 RER 175 TD 600...980 101 Ø 190 x 69 RER 190 TD 650...970 NEW 102 Ø 220 x 71 RER 220 TD1090...1280 NEW 103 NEW Ø 225 x 99 RER 225 TD1080...1600 104 201...413 x 50 x 48 QG 030 75...155 105 10 20 30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 900 1000 2000 3000 3 m /h 77 Dimensions Series Air flow Page Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 78 Centrifugal fans for DC operation Overview of technically feasible designs Please note that these special versions are not possible Centrifugal fans for all voltages and speeds, and not in all combinations. Series mm OPTIONAL P. RV 40 105 x 59 x 79 yes – • – –– • – – • – – 79 The special versions are designed for specific custo- RLF 35 51 x 51 x 15 * • –– – – – – – • – – 80 mers and projects. As a rule they are not available off RL 48 76 x 76 x 27 yes •• –– – – – – • – – 81 the shelf and are tied to minimum volumes. RL 65 97 x 93,5 x 33 * •• • • • • • – • – – 82 Please consult your customer support representative RL 90 N 121 x 121 x 37 yes / •• • • • • • – •• • 83 about the feasibility of your special variant. RLF 100 127 x 127 x 25 yes • •• • • • • – • • – 84 RG 90 N 135 x 135 x 38 yes / • •• • • • • – • •• 85 RG 125 N 180 x 180 x 40 yes • •• • • • • – • •• 86 RG 160 N 220 x 220 x 56 yes •• • • • • • – •• • 87 NEW RG 160 NTD 220 x 220 x 56 yes •• • • • • • – •• • 88 NEW RG 190 TD 225 x 225 x 85 yes •• • • • • • • • • • 89 NEW RG 220 TD 270 x 270 x 99 yes •• • • • • • • • • – 90 NEW RG 225 TD 270 x 270 x 132 yes •• • • • • • • • • – 91 NEW RET 97 TD 97 Ø x 41 * •• • • • • • – • – – 92 REF 100 100 Ø x 25 yes • •• • • • • – • • – 93 RER 101 101 Ø x 52 * •• • • • • • – • – – 94 NEW RER 120 TD 120 Ø x 54 * •• • • • • • – • – – 95 RER 125 N 138 Ø x 35 yes •• • • • • • – • – – 96 NEW RER 133 TD 133 Ø x 91 * •• • • • • • • • – – 97 RER 160 N 165 Ø x 51 yes •• • • • • • – •• • 98 NEW RER 160 NTD 165 Ø x 51 yes •• • • • • • – •• • 99 NEW REF 175 TD 175 Ø x 55 * •• • • • • • • • – – 100 NEW RER 175 TD 175 Ø x 69 * •• • • • • • • • • • 101 NEW RER 190 TD 190 Ø x 69 * •• • • • • • • • • • 102 NEW RER 220 TD 220 Ø x 71 * •• • • • • • • • – – 103 NEW RER 225 TD 225 Ø x 99 * •• • • • • • • • – – 104 QG 030 201...413 x 50 x 48 yes • –– – – – – – • – – 105 * approvals – not yet available Sleeve Bearings • available Ball Bearings applied for Optional special versions / Information pictograms (see page 20) On the catalogue pages and in the overview The special versions are designed for specific on page 20, the pictograms shown provide customers and projects and are not usually information about the special designs that are available off the shelf. technically feasible in the fan series. Please note that these special versions are not possi- ble for all voltages and speeds, and not in all combinations. 78 Dimensions VDE, UL, CSA Sintec sleeve bearings/ball bearings Sensor Go / No-go alarm Alarm with limit speed External temperature sensor Internal temperature sensor PWM control input Analogue control input Multi-option control input Humidity protection IP >= IP54 Salt spray fog protection Page Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 79 3 max. 24 m /h DC centrifugal fans Series RV 40 105 x 59 x 79 mm Highlights: – Pressure-optimised blower. – Motor with very low structure-borne noise properties. – Forward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 26, TR 64. Bared and tin-plated. – Mass: 100 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours RV 40-18/12 L 18 10,6 12 9...16 4,0 2,0 3 900 -20...+70 70 000 / 35 000 110 000 1 RV 40-18/12 H 24 14,1 12 9...16 5,0 4,5 4 800 -20...+70 50 000 / 25 000 80 000 2 Ø30 Ø31 2,3 18 2 125 10,5 100 27 75 50 1 25 18,35 36,35 12 2,51 0 3 6 9 12 15 CFM 58,85 44,9 32,4 20 5 10 15 25 m³/h 79 H H NN PP GG PPWM WM Pa [in H O] 0,1 0,2 0,3 0,4 2 Air flow Air flow Nominal voltage Voltage range Sound power level Ø46,5 Sintec sleeve bearings Ball bearings Power input Nominal speed Intake opening Ø40 Temperature range 60,4 Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 4,2 (2x) (40 °C) see P. 15 42,04 45,78 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 80 3 max. 9,6 m /h DC centrifugal fans Series RLF 35 51 x 51 x 15 mm Highlights: – Noise-optimised air outlet in scroll housing. – Very flat and powerful centrifugal fan. – Forward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 26, TR 64. Bared and tin-plated. – Mass: 40 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours RLF 35-8/12 N 9,6 5,7 12 8...13,2 5,5 3,5 6 700 -20...+70 60 000 / 30 000 120 000 1 RLF 35-8/14 N 9,6 5,7 24 14...28 5,5 4,3 6 700 -20...+70 60 000 / 30 000 120 000 1 1 175 150 125 100 75 50 25 0 1 2 3 4 5 6 7 CFM 2 4 6 8 10 m³/h 80 H H PP Pa [in H O] 0,1 0,2 0,3 0,4 0,5 0,6 2 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 81 3 max. 28 m /h DC centrifugal fans Series RL 48 76 x 76 x 27 mm Highlights: – Pressure-optimised blower. – Noise-optimised air outlet in scroll housing. – Forward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 26, TR 64. Bared and tin-plated. – Mass: 75 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 110 RL 48-19/12 ML 22 12,9 12 8...15 5,3 2,9 3 500 -20...+70 70 000 / 35 000 140 000 1 RL 48-19/12 28 16,5 12 8...13,5 5,7 5,0 4 400 -20...+70 60 000 / 30 000 120 000 2 /2 RL 48-19/14 ML 22 12,9 24 18...28 5,3 2,9 3 500 -20...+70 70 000 / 35 000 140 000 1 RL 48-19/14 28 16,5 24 18...26,4 5,7 5,0 4 400 -20...+70 60 000 / 30 000 120 000 2 /2 2 125 100 1 75 50 25 0 3 6 9 12 15 CFM 5 10 15 20 25 m³/h 81 H H NN PP GG Pa [in H O] 0,1 0,2 0,3 0,4 2 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 82 3 max. 61 m /h DC centrifugal fans Series RL 65 97 x 93,5 x 33 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Pressure-optimised blower. Noise-optimised air outlet in scroll housing. – Forward curved impeller. – Integrated snap-in fins for easy assembly. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 26, TR 64. Bared and tin-plated. – Mass: 170 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 110 RL 65-21/12 56 33,0 12 6,8…13,8 6,6 15,0 4 500 -20…+70 60 000 / 30 000 120 000 1 /2 RL 65-21/12H 61 35,9 12 6.8...13,2 6,8 19,2 4 900 -20...+55 55 000 / 37 500 105 000 2 RL 65-21/14 56 33,0 24 12...26,4 6,6 14,0 4 500 -20…+70 60 000 / 30 000 120 000 1 RL 65-21/14H 61 35,9 24 12...26,4 6,8 18,0 4 900 -20...+60 55 000 / 35 000 105 000 2 Snap-in fins for easy assembly 2 400 1 300 200 100 0 10 20 30 CFM 10 20 30 40 50 60 m³/h 82 H H NN AA PP GG PPWM WM TT II Pa [in H O] 0,4 0,8 1,2 1,6 2 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials 45 Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 83 3 max. 55 m /h DC centrifugal fans Series RL 90 N 121 x 121 x 37 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Forward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller; Housing base of steel plate. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 420 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 110 RL 90-18/12 N 40 23,5 12 7...15 5,8 5,5 2 500 -30...+75 62 500 / 27 500 112 500 1 /2 RL 90-18/14 NG 40 23,5 24 12...28 5,8 5,0 2 500 -10...+75 62 500 / 27 500 112 500 1 RL 90-18/14 N 40 23,5 24 12...28 5,8 5,0 2 500 -30...+75 62 500 / 27 500 112 500 1 /2 RL 90-18/18 NH 55 32,4 48 40...53 6,9 15,0 3 500 -30...+55 32 500 / 22 500 62 500 2 + + 37,3 0,7 3,5 60,3 26,5 2 2 200 175 150 125 1 100 75 + +0,4 4,2 50 15,5 + + 0,2 100,8 + + _ 30 0,3 25 + + 0,2 112,7 120,6 0 5 10 15 20 25 30 CFM Screw clip M4 or 8-32UNC. Screw-in depth max. 12.5 min. 9.0 10 20 30 40 50 m³/h ¤ 83 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,2 0,4 0,6 0,8 2 Air flow Air flow Nominal voltage Voltage range Sound power level + + 1 6 + +10 310 Sintec sleeve bearings 97 + +0,2 Ball bearings 71,4 2,5 Power input Nominal speed Temperature range 57,6 80 + + 0,2 104,8 120,6 Service life L 40 °C) 10 ( ebm-papst Standard 12±0,5 54 Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ + + 0,3 10 6 + + 0,4 67,4 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 84 3 max. 80 m /h DC centrifugal fans Series RLF 100 127 x 127 x 25 mm Highlights: – Very flat and powerful centrifugal fan. Pressure-optimised blower. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Some models available as standard with PWM control input and speed signal. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller. Housing base of galvanised steel plate. – Fully integrated electronic commutation. Protected against reverse polarity and locking. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 320 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 110/116 RLF 100-11/12 64 37,7 12 8...15 6,4 8,0 5 100 -20...+75 80 000 / 30 000 150 000 1 /2 RLF 100-11/14 64 37,7 24 16...30 6,4 8,0 5 100 -20...+75 80 000 / 30 000 150 000 1 /19 RLF 100-11/18 64 37,7 48 36...60 6,4 8,6 5 100 -20...+75 80 000 / 30 000 150 000 1 High speed models with Open Collector Tacho and PWM speed control. RLF 100-11/12/2HP-200 80 47,1 12 10...13,2 7,5 18,6 6 400 -20...+60 72 500 / 45 000 112 500 2 /2 RLF 100-11/18/2HP-182 80 47,1 48 43...53 7,5 17,0 6 400 -20...+70 72 500 / 35 000 112 500 2 /2 2 600 500 400 1 300 200 100 10 0 20 30 40 CFM 10 20 30 40 50 60 m³/h 84 ¤ H H NN IP54 IP54 AA PP GG PPWM WM TT II Pa [in H O] 0,4 0,8 1,2 1,6 2,0 2 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 85 3 max. 55 m /h DC centrifugal fans Series RG 90 N 135 x 135 x 38 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller; Housing base of steel plate. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. 48 V Model: Flat plug 6.3 x 0.8 mm for protective earth. – Mass: 440 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours RG 90-18/12 N 55 32,4 12 7...15 5,5 6,0 2 200 -30...+75 62 500 / 27 500 112 500 1 RG 90-18/14 NG 55 32,4 24 12...28 5,5 5,5 2 200 -10...+75 62 500 / 27 500 112 500 1 RG 90-18/14 N 55 32,4 24 12...28 5,5 5,5 2 200 -30...+75 62 500 / 27 500 112 500 1 RG 90-18/18 N 55 32,4 48 36...56 5,5 5,5 2 200 -30...+75 62 500 / 27 500 112 500 1 100 1 80 60 40 20 0 5 10 15 20 25 30 CFM 10 20 30 40 50 m³/h ¤ 85 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,1 0,2 0,3 2 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 86 3 max. 137 m /h DC centrifugal fans Series RG 125 N 180 x 180 x 40 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller; Housing base of steel plate. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. 48 V Model: Flat plug 6.3 x 0.8 mm for protective earth. – Mass: 730 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 110/112 RG 125-19/12 NM 60,0 35,3 12 7...15 4,8 2,0 1 750 -30...+75 70 000 / 30 000 135 000 1 RG 125-19/12 N 87,5 51,5 12 7...15 5,8 5,0 2 550 -30...+75 62 500 / 27 500 125 000 2 /2/12 RG 125-19/14 NM 60,0 35,3 24 12...28 4,8 2,0 1 750 -30...+75 70 000 / 30 000 135 000 1 RG 125-19/14 N 87,5 51,5 24 12...28 5,8 5,0 2 550 -30...+75 62 500 / 27 500 125 000 2 /2 RG 125-19/18 N 87,5 51,5 48 36...56 5,8 5,0 2 550 -30...+75 62 500 / 27 500 125 000 2 RG 125-19/18 NH 137 80,6 48 36...56 7,0 19,0 4 000 -20...+70 55 000 / 27 500 110 000 3 420 3 360 300 240 180 120 2 60 150 0 20 40 60 80 CFM 125 20 40 60 80 100 120 m³/h 100 75 1 50 25 0 10 20 30 40 50 CFM 20 60 80 m³/h 40 86 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,1 0,2 0,3 0,4 0,5 2 Air flow Air flow Pa [in H O] 0,4 0,8 1,2 2 Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 87 3 max. 209 m /h DC centrifugal fans Series RG 160 N 220 x 220 x 56 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller; Housing base of steel plate. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – 48 V Model: Flat plug 6.3 x 0.8 mm for protective earth. – Mass: 1.4 kg. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 112 RG 160-28/12 NM 139 81,1 12 7...14 5,6 7,5 1 900 -20...+70 80 000 / 40 000 160 000 1 RG 160-28/12 N 209 123,0 12 7,5...14 6,6 21,0 2 850 -20...+70 70 000 / 35 000 140 000 2 /12 RG 160-28/14 NM 139 81,1 24 12...28 5,6 7,0 1 900 -20...+70 80 000 / 40 000 120 000 1 RG 160-28/14 N 209 123,0 24 12...28 6,6 20,0 2 850 -20...+70 70 000 / 35 000 120 000 2 RG 160-28/18 N 209 123,0 48 28...60 6,6 20,0 2 850 -20...+70 70 000 / 35 000 120 000 2 /12 2 350 300 250 200 1 150 100 50 20 0 40 60 80 CFM 25 50 75 100 125 150 m³/h ¤ 87 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,2 0,4 0,6 0,8 1,0 1,2 2 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 88 3 max. 444 m /h DC centrifugal fans Series RG 160 NTD 220 x 220 x 56 mm Highlights: – Control inputs, alarm and speed signals available on request. – 3-phase fan drive with high degree of running smoothness. – Very high pressure build-up. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller; Housing base of sheet steel. – Fully integrated electronic commutation. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. 48 V Model: Flat plug 6.3 x 0.8 mm for protective earth. – Mass: 1.4 kg. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 59 16,4 — 2,0 800 1 min. RG 160-28/14 NTD... 24 16...28 -20...+60 55 000 / 27 500 110 000 max. 308 85,6 7,5 64,0 4 200 2 RG 160-28/14 NTD 308 85,6 24 16...28 7,5 64,0 4 200 -20...+60 55 000 / 35 000 110 000 2 RG 160-28/14 NTDH 370 217,8 24 16...28 7,8 101,0 5 000 -20...+60 50 000 / 32 500 102 500 3 59 16,4 — 2,0 800 1 min. RG 160-28/18 NTD... 48 38...57 -20...+70 55 000 / 27 500 110 000 max. 308 85,6 7,5 59,0 4 200 2 RG 160-28/18/ 2NTDHHP* 444 261,2 48 36...60 8,5 159 6 000 -20...+65 40 000 / 22 500 80 000 4 NEW Models RG 160-28/14 NTD... and RG 160-28/18 NTD... are available in customer-specific, custom-developed variants only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. *The specific service life is valid when an external capacitor is wired between the plus and minus strands. Please note the wiring suggestion. 4 1400 1200 1000 3 800 600 2 400 700 200 600 0 50 100 150 200 250 CFM 500 100 200 300 400 m³/h 400 300 200 100 n min 1 n max 0 30 60 90 120 150 CFM 50 100 150 200 250 m³/h 88 H H NN AA PP GG PPWM WM TT II Pa [in H O] 0,4 0,8 1,2 1,6 2,0 2,4 2 Air flow Air flow Pa [in H O] 0,8 1,6 2,4 3,2 4,0 4,8 2 Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials + 0,5 266 - Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:13 Seite 89 3 max. 930 m /h DC centrifugal fans Series RG 190 TD 225 x 225 x 85 mm Highlights: – 3-phase fan drive with high degree of running smoothness. Very high pressure build-up. – Backward-curved RadiCal impeller with high efficiency. – Standard models available with multifunctional control input for analogue, PWM and speed sign. – Compact design with integrated mounting plate and optimised inlet nozzle. General characteristics: – Housing and impeller of fibreglass-reinforced plastic. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 18, 20 or AWG 22, TR 64, speed signal and control input AWG 22, bared and tin-plated. – Mass: 1210 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RG 190-39/14/2 TDMLO 630 370,6 24 16...30 7,6 54 3 000 -20...+60 55 000 / 35 000 110 000 1 NEW RG 190-39/14/2 TDMO 820 482,4 24 16...36 7,9 100 3 900 -20...+65 52 500 / 30 000 105 000 2 NEW RG 190-39/18/2 TDMLO 630 370,6 48 36...57 7,6 52 3 000 -20...+65 55 000 / 35 000 110 000 1 NEW RG 190-39/18/2 TDMO 820 482,4 48 36...72 7,9 100 3 900 -20...+65 52 500 / 30 000 105 000 2 NEW RG 190-39/18/2 TDO 930 547,1 48 36...72 8,3 135 4 400 -20...+65 40 000 / 25 000 80 000 3 Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, standstill if control cable is interrupted. For suitable guard grilles, see page 176. 3 900 800 2 700 600 500 1 400 300 200 100 + +0,3 6,0 + +1,0 79 0 100 200 300 400 500 [CFM] 3 200 400 600 800 [m /h] ¤ 89 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II [Pa] 0,5 1 1,5 2 1,5 3 3,5 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 + +1 6 + + Curve 10 350 + + 0,5 201 Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information +0,5 - 305 Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 90 3 max. 1280 m /h DC centrifugal fans Series RG 220 TD 270 x 270 x 99 mm Highlights: – 3-phase fan drive with high degree of running smoothness. Very high pressure build-up. – Backward-curved impeller. – Standard models available with multifunctional control input for analogue, PWM and speed signal. – Compact design with integrated mounting plate and optimised inlet nozzle. General characteristics: – Housing and impeller of fibreglass-reinforced plastic. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 18, 20 or AWG 22, TR 64, speed signal and control input AWG 22, bared and tin-plated. – Mass:1870 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RG 220-44/14/2TDMO 1090 641,2 24 16...36 7,7 82 3 000 -20...+55 75 000 / 52 500 150 000 1 RG 220-44/18/2TDMO 1090 641,2 48 36...72 7,7 80 3 000 -20...+55 75 000 / 52 500 150 000 1 NEW NEW RG 220-44/18/2TDO 1280 752,9 48 36...72 8,0 140 3 500 -20...+55 55 000 / 40 000 110 000 2 Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, standstill if control cable is interrupted. For suitable guard grilles, see page 176. 2 600 1 500 400 300 200 100 + + 0,3 7,0 + + 1,0 92 0 100 200 300 400 500 600 700 [CFM] 3 [m /h] 200 400 600 800 1000 1200 90 ¤ H H NN IP54 IP54 AA PP GG PPWM WM TT II [Pa] 0,25 0,5 0,75 1 1,25 1,5 1,75 2 2,25 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 + +1 6 + + Curve 10 350 + + 0,5 243,2 Specials + 0,5 305- Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 91 3 max. 1210 m /h DC centrifugal fans Series RG 225 TD 270 x 270 x 119 mm Highlights: – 3-phase fan drive with high degree of running smoothness. Very high pressure build-up. – Backward-curved RadiCal impeller with high efficiency. – Standard models available with multifunctional control input for analogue, PWM and speed sign. – Compact design with integrated mounting plate and optimised inlet nozzle. General characteristics: – Housing and impeller of fibreglass-reinforced plastic. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 18, 20 or AWG 22, TR 64, speed signal and control input AWG 22, bared and tin-plated. – Mass:1750 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RG 225-55/14/2TDMLO 1040 611,8 24 16...36 7,3 65 2 400 -20...+55 72 500 / 52 500 145 000 1 RG 225-55/18/2TDMLO 1040 611,8 48 36...72 7,3 65 2 400 -20...+55 72 500 / 52 500 145 000 1 NEW NEW RG 225-55/18/2TDMO 1210 711,8 48 36...72 7,9 116 2 800 -20...+55 55 000 / 40 000 110 000 2 Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, standstill if control cable is interrupted. The specific service life is valid when an external capacitor is wired between the plus and minus strands. Please note the wiring suggestion. For suitable guard grilles, see page 176. 600 2 500 1 400 300 200 100 + + 0,3 7,0 + + 1,0 112 0 100 200 300 400 500 600 700 [CFM] 3 [m /h] 200 400 600 800 1000 1200 ¤ 91 H H NN IP54 IP54 AA PP GG PPWM WM TT II [Pa] 0,25 0,5 0,75 1 1,25 1,5 1,75 2 2,25 [in H O] 2 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 + +1 6 Curve + + 10 350 + + 0,5 243,2 Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 92 3 max. 220 m /h DC centrifugal fans Series RET 97 TD 97 Ø x 41 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very high pressure build-up. – Forward curved impeller. – Available as standard with PWM control input and speed signal. Additional inputs and outputs on request. General characteristics: – Impeller of galvanised steel plate. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 430 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RET 97-25/14/2TDP* 220 129 24 16...36 8,1 72 6 000 -20...+60 80 000 / 50 000 160 000 1 NEW RET 97-25/18/2TDP 220 129 48 36...60 8,1 72 6 000 -20...+60 80 000 / 50 000 160 000 1 * Preliminary Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, maximum speed at sensor break. To attain the specified service life, an external capacitor must be wired between the plus and minus strands. Please note the wiring suggestion on page. The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 116 x 116 mm. Cover plate 116 x 116 mm with an air inlet of Ø 80 mm, concentric to the impeller. Air flow Air flow 800 1 700 600 500 400 300 200 24,4 100 + + 1 7,95 + + 1 40,5 0 25 50 75 100 125 CFM 50 100 150 200 m³/h 92 H H NN AA PP GG PPWM WM TT II Pa [in H O] 0,8 1,6 2,4 2 2 mm R16 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard + + 1 6 Service life L (T ) 10 max ebm-papst Standard + + 10 310 M4 (4x) Life expectancy L ∆ 10 ø47,1 (40 °C) see P. 15 ø58,3 Curve 97 Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 93 3 max. 104 m /h DC centrifugal fans Series REF 100 104 Ø x 25 mm Highlights: – Pressure-optimised blower. – Very flat and powerful centrifugal fan. – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow radial, direction of rotation clockwise, seen on rotor. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 160 g Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 110 REF 100-11/12 86 50,6 12 8...15 6,3 7,5 5 400 -20...+75 80 000 / 30 000 135 000 1 /2 REF 100-11/14 86 50,6 24 16...30 6,3 7,5 5 400 -20...+75 80 000 / 30 000 135 000 1 /2 REF 100-11/18 86 50,6 48 36...60 6,3 7,5 5 400 -20...+75 80 000 / 30 000 135 000 1 /2 REF 100-11/18 H 104 61,2 48 36...56 6,9 14,8 6 700 -20...+70 67 500 / 30 000 120 000 2 The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 127 x 127 mm. Cover plate 127 x 127 mm with an air inlet of Ø 70 mm, concentric to the impeller. Air flow Air flow + 0,3 - 24,9 + 0,4 22,4 - + 2 0,3 - 5,7 500 400 1 300 200 100 0 10 20 30 40 50 CFM 20 40 60 80 100 m³/h ¤ 93 H H NN IP54 IP54 AA PP GG PPWM WM TT II Pa [in H O] 0,4 0,8 1,2 1,6 2 2 mm R 3,5 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 O 72 M 4 (3x) ebm-papst Standard 6 6 deep tief O 56 Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 94 3 max. 190 m /h DC centrifugal fans Series RER 101 101 Ø x 52 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow radial, direction of rotation clockwise, seen on rotor. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 305 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 116 RER 101-36/12NHH 190 111,8 12 9..13,6 7,2 20,5 5 900 -20...+70 60 000 / 30 000 120 000 1 RER 101-36/14NHH 190 111,8 24 18..27,2 7,2 20,0 5 900 -20...+70 60 000 / 30 000 120 000 1 RER 101-36/18NHH 190 111,8 48 43...52 7,2 19,0 5 900 -20...+70 60 000 / 30 000 120 000 1 /19 The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 148 x 148 mm. Cover plate 148 x 148 mm with an air inlet of Ø 66 mm, concentric to the impeller. Air flow Air flow 36,7 1 400 300 200 + 0,2 6,0 - 100 + 0,45 7,0 - +0,55 - 8,0 + 0,95 50,25 - 0 20 40 60 80 100 CFM + 0,9 - 51,7 25 50 75 100 125 150 m³/h 94 H H NN AA PP GG PPWM WM TT II Pa [in H O] 0,5 1,0 1,5 2 1 mm R 7 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range M 4 (3x) Service life L (40 °C) 10 10 10 deep tief + 0,2 - ebm-papst Standard O 60 Service life L (T ) 10 max ebm-papst Standard Life expectancy L ∆ 10 (40 °C) see P. 15 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 95 3 max. 390 m /h DC centrifugal fans Series RER 120 TD 120 Ø x 54 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very high pressure build-up. – Backward curved impeller. – Available as standard with PWM control input and speed signal. Additional inputs and outputs on request. General characteristics: – Impeller of fibreglass-reinforced plastic. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 430 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RER 120-26/14/2 TDMP* 320 188,2 24 16...32 tbd 51 5 200 -20...+60 60 000 / 37 500 120 000 1 NEW RER 120-26/14/2 TDP 377 221,9 24 16...32 8,2 78 6 100 -20...+60 55 000 / 35 000 110 000 2 NEW RER 120-26/18/2 TDMP* 320 188,2 48 36...60 tbd 51 5 200 -20...+60 57 500 / 35 000 115 000 1 NEW RER 120-26/18/2 TDP 390 229,5 48 36...60 8,3 92 6 300 -20...+60 50 000 / 30 000 100 000 3 *Preliminary Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, max. speed if control cable is interrupted. The specific service life is valid when an external capacitor is wired between the plus and minus strands. Please note the wiring suggestion. The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 140 x 140 mm. Cover plate 140 x 140 mm with an air inlet of Ø 96 mm, Air flow concentric to the impeller. Air flow 3 600 2 500 400 1 300 200 + + 1,5 13,5 100 26 + + 1 0 50 100 150 200 CFM 54 100 200 300 m³/h 95 H H NN AA PP GG PPWM WM TT II Pa 0,8 1,6 [in H O] 2 2 mm R16 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard + + 1 6 Life expectancy L ∆ 10 + + 10 310 (40 °C) see P. 15 ø47,1 M4 (4x) max. 8 tief max. 8 ø58,3 Curve deep + + 0,5 ø120 Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 96 3 max. 166 m /h DC centrifugal fans Series RER 125 N 138 Ø x 35 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow radial, direction of rotation clockwise, seen on rotor. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 320 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 112 RER 125-19/12 N 110 64,7 12 7...15 5,7 4,5 2 650 -30...+75 62 500 / 27 500 125 000 1 /12 RER 125-19/14 N 110 64,7 24 12...28 5,7 4,5 2 650 -30...+75 62 500 / 27 500 125 000 1 RER 125-19/14 NH 166 97,7 24 12...28 7,0 13,0 4 000 -20...+70 55 000 / 27 500 110 000 2 RER 125-19/18 N 110 64,7 48 36...56 5,7 5,0 2 650 -30...+75 62 500 / 27 500 125 000 1 The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 220 x 220 mm. Cover plate 220 x 220 mm with an air inlet of Ø 86 mm, concentric to the impeller. Air ow Air ow + +0,5 35 4 + +0,3 30,7 4 19 2 200 150 1 100 50 0 20 40 60 80 CFM 25 50 75 100 125 m³/h 96 H H NN AA PP GG II PPWM WM TT Pa [in H O] 0,2 0,4 0,6 0,8 2 2mm R5 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max + +10 ø56 400 ebm-papst Standard ø47 M4 (2x) 5 tief 5 deep Life expectancy L ∆ 10 (40 °C) see P. 15 + +1 6 Curve ø125 Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 97 3 max. 565 m /h DC centrifugal fans Series RER 133 TD 133 Ø x 91 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very high pressure build-up. – Backward curved impeller. – Available as standard with PWM control input and speed signal. Additional inputs and outputs on request. General characteristics: – Impeller of fibreglass-reinforced plastic. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 890 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RER 133-41/14/2 TDMP 460 270,6 24 16...30 tbd 53 5 000 -20...+65 72 500 / 40 000 145 000 1 NEW RER 133-41/14/2 TDP* 565 332,4 24 16...36 tbd 90 6 000 -20...+65 70 000 / 37 500 140 000 2 NEW RER 133-41/18/2 TDMP* 460 270,6 48 36...57 tbd 50 5 000 -20...+65 72 500 / 40 000 145 000 1 NEW RER 133-41/18/2 TDP 565 332,4 48 36...72 8,2 87 6 000 -20...+65 70 000 / 37 500 140 000 2 *Preliminary Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, max. speed if control cable is interrupted. The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 140 x 140 mm. Cover plate 140 x 140 mm with an air inlet of Ø 87 mm, Air flow concentric to the impeller. Air flow 2 600 1 400 200 41 + + 1,5 30,4 + + 1 91 0 50 100 150 200 250 300 CFM 100 200 300 400 500 m³/h 97 H H NN AA PP GG PPWM WM TT II Pa 0,8 1,6 2,4 [in H O] 2 2 mm R7 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard + + 1 6 Life expectancy L ∆ 10 + + 10 (40 °C) see P. 15 + + 425 0,1 ø58 M4 (4x) + + max. 8 tief 0,3 max. 8 ø72 Curve deep + + 0,5 ø133 Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 98 3 max. 255 m /h DC centrifugal fans Series RER 160 N 165 Ø x 51 mm Highlights: – Optional Vario-Pro: Highly adaptable software configuration of the fan enables a tailor-made solution to the specific requirements of your applications. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Direction of air flow radial, direction of rotation clockwise, seen on rotor. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 590 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. 112 RER 160-28/12 N 255 150,1 12 7...14 6,4 19,0 3 000 -20...+70 75 000 / 35 000 140 000 1 /12 RER 160-28/14 N 255 150,1 24 12...28 6,4 19,0 3 000 -20...+70 75 000 / 35 000 140 000 1 RER 160-28/18 N 255 150,1 48 28...60 6,4 19,0 3 000 -20...+70 75 000 / 35 000 140 000 1 /12 The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 260 x 260 mm. Cover plate 260 x 260 mm with an air inlet of Ø 100 mm, concentric to the impeller. Air ow Air ow 1 200 150 100 50 + +0,8 6,1 + +0,7 50,3 0 20 40 60 80 100 120 CFM 50 100 150 200 m³/h 98 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa [in H O] 0,2 0,4 0,6 0,8 2 2mm R5 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard + + 1 Service life L (T ) 6 10 max ebm-papst Standard + + 0,1 + + ø58 10 425 M4 (4x) + + 0,3 Life expectancy L ∆ ø72 10 max. 8 deep max. 8 tief (40 °C) see P. 15 + + 0,5 ø160 Curve Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 99 3 max. 505 m /h DC centrifugal fans Series RER 160 NTD 165 Ø x 51 mm Highlights: – Control inputs, alarm and speed signals available on request. – 3-phase fan drive with high degree of running smoothness. – High pressure build-up. – Backward curved impeller. General characteristics: – Fibreglass-reinforced plastic scroll housing and impeller; Housing base of steel plate. – Fully integrated electronic commutation. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 22, TR 64. Bared and tin-plated. – Mass: 590 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours P. NEW RER 160-28/14N/2TDA 370 217 24 16...28 7,4 51 4 200 -20...+60 55 000 / 27 500 110 000 2 NEW RER 160-28/18N/2TDHHP* 505 297,5 48 36...60 8,5 142 6 000 -20...+65 40 000 / 22 500 80 000 3 min. 66 18,3 — 2,0 800 1 RER 160-28/18 NTD... 48 38...57 -20...+70 55 000 / 27 500 110 000 max. 354 98,3 7,4 43,0 4 200 2 Model RER 160-28/18 NTD... is available in customer-specific, custom-developed variant only. The data specified here are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. *The specific service life is valid when an external capacitor is wired between the plus and minus strands. Please note the wiring suggestion. The air flow and noise level of fans without external housing depends on the installation conditions. The sta- ted air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 260 x 260 mm. Air flow Cover plate 260 x 260 mm with an air inlet of Ø 100 mm, concentric to the impeller. Air flow 3 1000 800 600 400 2 200 500 0 50 100 150 200 250 CFM 100 200 300 400 m³/h 400 300 200 + +0,8 6,1 100 + + 50,3 0,7 1 n min n max 0 50 100 150 CFM 50 100 150 200 250 m³/h 99 H H NN AA PP GG PPWM WM TT II Pa 0,4 0,8 1,2 1,6 [in H O] 2 2 mm R5 Air flow Air flow Pa 0,8 1,6 2,4 3,2 4,0 [in H O] 2 Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) + + 10 max 1 6 ebm-papst Standard + + 0,1 + + ø58 10 425 Life expectancy L ∆ M4 (4x) + + 0,3 10 ø72 max. max.88 deep tief (40 °C) see P. 15 + + 0,5 ø160 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 100 3 max. 800 m /h DC centrifugal fans Series REF 175 TD 175 Ø x 55 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very high pressure build-up. Backward curved impeller. – Available as standard with PWM control input and speed signal. Additional inputs and outputs on request. General characteristics: – Impeller of galvanised steel plate. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 20, TR 64, speed signal and control input AWG 22, bared and tin-plated. – Mass: 930 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW REF 175-30/18/2TDP 800 470 48 36 ... 72 8,3 121 4 400 -20...+60 65 000 / 37 500 130 000 1 Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, max. speed if control cable is interrupted. The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 180 x 180 mm. Cover plate 180 x 180 mm with an air inlet of Ø 125,5 mm, Air flow concentric to the impeller. Air flow 1 600 500 400 300 200 + + 0,8 6,8 100 30 + + 1 54,3 0 100 200 300 400 500 CFM 200 400 600 800 m³/h 100 H H NN AA PP GG II PPWM WM TT Pa 0,8 1,6 [in H O] 2 2 mm R10 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard + + 1 6 Life expectancy L ∆ 10 + + (40 °C) see P. 15 + + 10 425 0,1 ø58 M4 (4x) + + 0,3 max. max. 88 deep tief ø72 Curve + + 1,0 ø175 Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:14 Seite 101 3 max. 980 m /h DC centrifugal fans Series RER 175 TD 175 Ø x 69 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very high pressure build-up. Backward curved impeller. – Available as standard with PWM control input and speed signal. Additional inputs and outputs on request. General characteristics: – Impeller of fibreglass-reinforced plastic. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 18, 20 or AWG 22, TR 64, speed signal and control input AWG 22, bared and tin-plated. – Mass: 775 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RER 175-42/14/2 TDMLP 600 353,0 24 16...30 7,3 45 3 400 -20...+65 72 500 / 45 000 145 000 1 NEW RER 175-42/14/2 TDMP 865 508,8 24 16...36 8,2 110 4 800 -20...+65 70 000 / 40 000 140 000 2 NEW RER 175-42/18/2 TDMLP 600 353,0 48 36...57 7,3 46 3 400 -20...+65 72 500 / 45 000 145 000 1 NEW RER 175-42/18/2 TDMP* 865 508,8 48 36...72 8,2 110 4 800 -20...+65 70 000 / 40 000 140 000 2 NEW RER 175-42/18/2 TDP 980 576,8 48 36...72 8,5 166 5 400 -20...+65 60 000 / 32 500 115 000 3 * preliminary data Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, max. speed if control cable is interrupted. The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 180 x 180 mm. Cover plate 180 x 180 mm with an air inlet of Ø 125,5 mm, Air flow concentric to the impeller. Air flow 3 800 2 600 400 1 200 + + 0,8 6,8 42 0 100 200 300 400 500 CFM ±1 69 200 400 600 800 m³/h ¤ 101 H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II Pa 0,8 1,6 2,4 3,2 [in H O] 2 2 mm R10 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard + +1 Service life L (T ) 6 10 max ebm-papst Standard + + 0,1 + + ø58 10 425 M4 (4x) + + 0,3 Life expectancy L ∆ ø72 10 max. 8 deep max. 8 tief (40 °C) see P. 15 + + 0,5 ø175 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:15 Seite 102 3 max. 970 m /h DC centrifugal fans Series RER 190 TD 190 Ø x 69 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very high pressure build-up. – Backward curved RadiCal impeller with maximum efficiency. – Standard models available with multifunctional control input for analogue, PWM and speed signal. General characteristics: – Impeller of fibreglass-reinforced plastic. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 18, 20 or AWG 22, TR 64, speed signal and control input AWG 22, bared and tin-plated. – Mass: 870 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RER 190-39/14/2TDMLO 650 382,4 24 16...30 7,6 58 3 000 -20...+60 55 000 / 35 000 110 000 1 NEW RER 190-39/14/2TDMO 860 505,9 24 16...36 7,9 110 3 900 -20...+65 52 500 / 30 000 105 000 2 NEW RER 190-39/18/2TDMLO 650 382,4 48 36...57 7,6 56 3 000 -20...+65 55 000 / 35 000 110 000 1 NEW RER 190-39/18/2TDMO 860 505,9 48 36...72 7,9 105 3 900 -20...+65 52 500 / 30 000 105 000 2 NEW RER 190-39/18/2TDO 970 570,6 48 36...72 8,3 148 4 400 -20...+65 40 000 / 22 500 80 000 3 Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, standstill if control cable is interrupted. The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 195 x 195 mm. Air flow Cover plate 195 x 195 mm with an air inlet of Ø 125,5 mm, concentric to the impeller. Air flow 3 900 800 2 700 600 500 1 400 300 200 39 + + 1 100 6,5 + + 1 69 0 100 200 300 400 500 600 [CFM] 3 200 400 600 800 1000 [m /h] 102 ¤ H H SS NN IP54 IP54 AA PP PP GG PPWM WM TT II [Pa] 0,5 1 1,5 2 1,5 3 3,5 [in H O] 2 2 mm R10 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard + + 1 6 Life expectancy L ∆ 10 (40 °C) see P. 15 + + + + 10 0,1 425 58 M4 (4x) max. 8 tief max. 8 deep + + Curve 0,3 72 + + 0,3 190 Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:15 Seite 103 3 max. 1280 m /h DC centrifugal fans Series RER 220 TD 221 Ø x 71 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very high pressure build-up. – Backward curved impeller. – Standard models available with multifunctional control input for analogue, PWM and speed sign. General characteristics: – Impeller of fibreglass-reinforced plastic. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 18, 20 or AWG 22, TR 64, speed signal and control input AWG 22, bared and tin-plated. – Mass: 940 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RER 220-44/14/2TDMO 1090 641,2 24 16...36 7,7 82 3 000 -20...+55 75 000 / 52 500 150 000 1 NEW RER 220-44/18/2TDMO 1090 641,2 48 36...72 7,7 80 3 000 -20...+55 75 000 / 52 500 150 000 1 NEW RER 220-44/18/2TDO 1280 752,9 48 36...72 8,0 140 3 500 -20...+55 55 000 / 40 000 110 000 2 Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0 % PWM, standstill if control cable is interrupted. The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 230 x 230 mm. Air flow Cover plate 230 x 230 mm with an air inlet of Ø 146 mm, concentric to the impeller. Air flow 2 600 1 500 400 300 200 44,0 100 + + 1,5 7,2 + + 1 71 0 100 200 300 400 500 600 700 [CFM] 3 200 400 600 800 1000 1200 [m /h] ¤ 103 H H NN IP54 IP54 AA PP GG PPWM WM TT II [Pa] 0,25 0,5 0,75 1 1,25 1,5 1,75 2 2,25 [in H O] 2 2 mm R10 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard + +1 6 Life expectancy L ∆ 10 (40 °C) see P. 15 + + + + 10 425 0,1 ø58 M4 (4x) + + max. 8 deep 0,3 max. 8 tief ø Curve 72 + + 0,5 ø 220,9 Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:15 Seite 104 3 max. 1600 m /h DC centrifugal fans Series RER 225 TD 225 Ø x 99 mm Highlights: – 3-phase fan drive with high degree of running smoothness. – Very high pressure build-up. – TDM and TDML model with backward-curved RadiCal impeller with maximum efficiency. – Standard models available with multifunctional control input for analogue, PWM and speed signal. General characteristics: – Impeller of fibreglass-reinforced plastic. – Fully integrated electronic commutation. – Direction of rotation: CW seen on rotor. – Direction of air flow: axial air intake, centrifugal air exhaust out of the outlet. – Connection via single strands AWG 18, 20 or AWG 22, TR 64, speed signal and control input AWG 22, bared and tin-plated. – Mass: 1030 g. Nominal data 3 Type m /h CFM VDC VDC Bel(A) / Watts RPM °C Hours Hours NEW RER 225-55/18/2TDMLO 1080 635,4 48 36...72 7,5 82 2 500 -20...+55 70 000 / 50 000 140 000 1 NEW RER 225-55/18/2TDMO 1210 711,9 48 36...72 7,9 120 2 800 -20...+55 55 000 / 40 000 110 000 2 NEW RER 225-63/18/2TDP-402 1600 941,3 48 36...72 8,1 165 3 300 -20...+55 52 500 / 37 500 105 000 3 Speed control range from 800 rpm at 7 % PWM up to nominal speed at > 90 % PWM. Standstill at 0% PWM, Type O: standstill at sensor break. Type P: maximum speed at sensor break. Type RER 225-63 The air flow and noise level of fans without external housing depends on the installation conditions. The stated air flow and noise levels have been measured under the following conditions: Centrifugal fan mounted on a base plate 230 x 230 mm. Air flow Cover plate 230 x 230 mm with an air inlet of Ø 146 mm, concentric to the impeller. Air flow + + 0,8 8,6 62,0 + + 1 99 3 700 Type RER 225-55 600 2 500 1 400 300 200 100 55 + + 1,5 10,6 + + 1 99 0 100 200 300 400 500 600 700 800 900 [CFM] 3 200 400 600 800 1000 1200 1400 [m /h] 104 ¤ H H NN IP54 IP54 AA PP GG PPWM WM TT II [Pa] 0,25 0,5 0,75 1 1,25 1,5 1,75 2 2,25 2,5 2,75 [in H O] 2 2 mm R10 Air flow Air flow Nominal voltage Voltage range Sound power level Sintec sleeve bearings Ball bearings Power input Nominal speed Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard + + 1 6 + + 1 6 Life expectancy L ∆ 10 (40 °C) see P. 15 + + + + 425 10 0,1 ø58 + + + + 10 ø 0,1 425 58 M4 (4x) + + M4 (4x) 0,3 max. max. 88deep tief ø72 max. 8 tief Curve max. 8 deep + + 0,3 ø 72 0,5 max. ø225 + + ø 0,5 225 Specials Kompaktlüfter__2011__EN__Final__17_01_2011_:Vorlage 18.01.2011 14:15 Seite 105 3 max. 155 m /h DC tangential fan Series QG 030 201...413 x 50 x 48 mm Highlights: – Tangential fans with high air flow. – Large air outlet. General characteristics: – Motor with ball bearing system. Impeller mounting plate with sleeve bearings. – Fan housing and impeller of aluminium. Plastic housing side parts. – Fully integrated electronic commutation. – Protected against reverse polarity and locking. – Air exhaust out of the outlet. – Connection via single strands. Bared and tin-plated. – Mass: 235 / 290 / 380 / 415 g. Nominal data 3 Type m /h CFM VDC VDC db(A) Bel(A) / Watts °C Hours Hours QG 030-148/12 75 44,1 12 8...14 49 5,7 / 6,2 -20...+60 30 000 / 10 000 32 500 1 QG 030-198/12 100 58,9 12 8...14 51 5,8 / 8,0 -20...+60 30 000 / 10 000 32 500 2 QG 030-303/12 140 82,4 12 8...14 51 5,8 / 8,7 -20...+60 30 000 / 10 000 32 500 3 QG 030-353/12 155 91,3 12 8...14 51 5,9 / 9,6 -20...+60 30 000 / 10 000 32 500 4 QG 030-148/14 75 44,1 24 16...28 49 5,7 / 6,2 -20...+60 30 000 / 10 000 32 500 1 QG 030-198/14 100 58,9 24 16...28 51 5,8 / 8,0 -20...+60 30 000 / 10 000 32 500 2 QG 030-303/14 140 82,4 24 16...28 51 5,8 / 8,7 -20...+60 30 000 / 10 000 32 500 3 QG 030-353/14 155 91,3 24 16...28 51 5,9 / 9,6 -20...+60 30 000 / 10 000 32 500 4 Tangential fans are only suitable for operation with high Type Dimension:LL 1 rate and low back pressure. +1,5 QG 030-148/ .. 201 148 +1,5 QG 030-198/ .. 258 198 +1,5 QG 030-303/ .. 363 303 +1,5 QG 030-353/ .. 413 353 The service life values refer to horizontal installation of the fan. 50 12 6 38,4 50 Ø2,3(8x) 10 L 10 1 40 30 20 ±0,7 3,2 5,4 10 16,5 21,5 L 1 2 3 4 34,4 10 0 15 30 45 60 75 CFM Cut-out for square nut M3 DIN 562, flat (6x) CutoutforsquarenutM3 DIN562-flat(6x) 20 40 60 80 100 120 m³/h 105 H H PP Pa [in H O] 0,05 0,10 0,15 2 Air flow Air flow Nominal voltage Voltage range Sound pressure level 47,5 Sound power level Sleeve bearings Ball bearings Power input ±10 300 Ø9 Temperature range Service life L (40 °C) 10 ebm-papst Standard Service life L (T ) 10 max ebm-papst Standard +0,3 Ø41 Life expectancy L ∆ 10 (40 °C) see P. 15 Ø35,1 Curve Specials Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / i-maxx DC fans - specials DC centrifugal fans DC axial fans Information