Electronics Finder

Description

AC Motors Shaded Pole Motor Motor Only Square Body 230V 5W 50Hz/60Hz 1550r/min 1Shaft Foot Mount
M4Q045-BD01-75

Part Number

M4Q045-BD01-75

Price

Request Quote

Manufacturer

EBM-PAPST INC.

Lead Time

Request Quote

Category

Motors » AC Motors

Specifications

Manufacturer

ebm-papst Inc.

Manufacturers Part #

M4Q045-BD01-75

Industry Aliases

M4Q045-BD01 -75

Sub-Category

AC Motors

Factory Pack Quantity

Datasheet

Q_Q-Motor_Axial_EN_mini_070921.pdf

1407 KiB

Download

Extracted Text

Square shaded-pole motors (Q-motors) Standard design 302 Multi-function design 304 Frigo design 305 Plug terminal design 306 UL and CSA design 307 Air performance curves 308 301 EC axial AC axial AC axial AC axial General Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial fans AC axial fans S series A series K series S series information Table of options = available ex stock Page 302 Page 304 Page 305 Page 306 Page 307 18 mm (height 48 mm) �� Foot measure 26 mm (height 51 mm) �� A side (3 x M4, Ø 71.4 mm) � Mount B side (3 x M4, Ø 71.4 mm) �� Thread ends, A side (4 x M4) �� 2 Jacketed cable (3 x 0.5 mm ) 450 mm 1500 mm 1500 mm 2 Electr. terminals Plug terminal (3 x 0.5 mm ) � UL jacketed cable (3 x AWG20) 450 mm 300 Standard Multi-function Frigo Plug terminal UL and CSA Square shaded-pole motors Standard design – Foot mounting: Track dimension 26 mm (height 51 mm) – Type of protection: IP 42 2 – Electrical connection: Jacketed cable 3 x 0.5 mm with brass lead tips – Product conforming to standard: CE – Approvals: VDE – Curves: Page 308 Nominal data Dimensions Type VAC Hz rpm W W A °C kg BE K A 1~ 230 50 1300 5 29 0.19 -30 to +40 M4Q045-BD01 -01 A 0.9 76 42 15 B 1~ 230 60 1550 5 26 0.17 -30 to +40 C 1~ 230 50 1300 7 31 0.20 -30 to +40 M4Q045-CA01 -01 B 1.1 82 42 15 D 1~ 230 60 1550 8 30 0.20 -30 to +40 E 1~ 230 50 1300 10 36 0.25 -30 to +40 M4Q045-CA03 -51 C 1.2 82 42 15 F 1~ 230 60 1550 9 34 0.22 -30 to +40 G 1~ 230 50 1300 16 60 0.42 -30 to +40 M4Q045-CF01 -01 D 1.3 87 42 15 H 1~ 230 60 1550 16 58 0.36 -30 to +40 I 1~ 230 50 1300 18 70 0.48 -30 to +40 (1) M4Q045-DA01 -01 E 1.6 93 54 15 J 1~ 230 60 1550 18 62 0.42 -30 to +40 K 1~ 230 50 1300 23 86 0.62 -30 to +40 (1) M4Q045-DA05 -01 F 1.6 93 54 15 L 1~ 230 60 1550 25 80 0.55 -30 to +40 M 1~ 230 50 1300 25 90 0.62 -30 to +40 (1) M4Q045-EA01 -01 G 2.0 103 59 16 N 1~ 230 60 1550 26 80 0.55 -30 to +40 O 1~ 230 50 1300 34 110 0.75 -30 to +40 (1) M4Q045-EF01 -01 H 2.2 125 79 33 P 1~ 230 60 1550 34 100 0.65 -30 to +40 subject to alterations (1) Foot mounting possible on A or B side ±2 83 F 67 B 58 K M4 B side A side ±2 E 1,5 C 26 ±2 G Foot measure � "V" "A" � 302 Axial impeller Guard grille Basket guard grille Wall ring Mounting bracket p. 377 p. 378 p. 378 p. 379 p. 380 Ø41 Combination: H Motor axial impeller 450 Curve Nominal voltage Frequency 51 Speed/rpm 71,4 Power output Power input Ø3,6 Current draw Ø25,4 Perm. amb. temp. Mass ØD � Direction of rotation Valid for all designs: – Material: Housing made of die-cast aluminium – Mounting: Guard grille and wall ring are mounted onto the protruding Stator pack: Coated in black thread ends of the A side. The Q-motor can also be screwed on via the – Direction of air flow: "V" or "A" (depending on axial impeller used) mounting flanges (integrated in the bearing shields). – Direction of rotation: Counter-clockwise, seen on shaft end – Axial impeller mounting: Mounted to the motor shaft using a plastic – Insulation class: "B" adapter with pulling peg and an M4 screw (combination A-D) or M5 – Mounting position: Any, preferrably horizontal (combination E-H) screw. – Condensate discharges: None – Power specifications: At 60 Hz, the blade angle of the axial impellers – Mode of operation: Continuous operation (S1) must be reduced by 6° each. – Bearing: Self-adjusting calotte sleeve bearing (mean service life of 30,000 hours in horizontal installation position) – Motor protection: Impedance protection (combination A-C) or thermal overload protector internally switched (combination D-H) – Protection class: I Blade angle 22° ± 1°30´ Blade angle 28° ± 1°30´ Blade angle 34° ± 1°30´ Axial impellers 3 3 3 (2) (2) (2) Ø D H FG C m /h FG C m /h FG C m /h 154 90 61 56 27.5 60 56 59 32.0 100 54 62 37.0 140 172 103 58 57 31.0 120 55 59 36.0 180 53 63 42.0 230 200 123 58 58 32.0 190 55 60 37.5 300 —— — — 200 123 65 58 32.0 190 62 60 37.5 300 59 64 45.0 400 230 123 64 62 35.0 500 —— — — —— — — 230 123 64 62 35.0 500 60 65 43.0 630 52 68 50.0 820 254 135 64 62 37.0 580 —— — — —— — — 254 135 70 62 37.0 580 65 66 45.0 840 —— — — 254 135 76 74 37.0 580 72 78 45.0 840 67 80 52.0 1070 300 160 75 79 43.0 1000 —— — — —— — — 300 160 75 79 43.0 1000 67 81 53.5 1400 —— — — 300 160 86 84 43.0 1000 77 86 53.5 1400 —— — — 300 160 108 104 43.0 1000 104 106 53.5 1400 95 112 61.0 1700 (2) established at counterpressure of 20 Pa 303 EC axial AC axial AC axial AC axial General Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial fans AC axial fans S series A series K series S series information M4 M4 71,4 Square shaded-pole motors Multi-function design – Foot mounting: Track dimension 26 mm (height 51 mm) or 18 mm (height 48 mm) possible – Bearing shields: A and B-sides, tapped holes 3x M4, diameter of pitch circle 71.4 mm; mounting of guard grille and wall ring on A-side bearing shield; opposite M4 are securely installed in the feet (knurled hex nuts are not included in delivery scope) – Type of protection: IP 42 2 – Electrical connection: Jacketed cable 3 x 0.5 mm with brass lead tips – Product conforming to standard: CE – Approvals: VDE – Curves: Page 308 Nominal data Dimensions Type p.302 VAC Hz rpm W W A °C kg AB E F K A 1~ 230 50 1300 5 29 0.19 -30 to +40 M4Q045-BD01 -75 A 0.9 43 76 43.5 12 15.0 B 1~ 230 60 1550 5 26 0.17 -30 to +40 C 1~ 230 50 1300 7 31 0.20 -30 to +40 M4Q045-CA01 -75 B 1.1 49 82 43.5 10 15.0 D 1~ 230 60 1550 8 30 0.20 -30 to +40 E 1~ 230 50 1300 10 36 0.25 -30 to +40 M4Q045-CA03 -75 C 1.2 49 82 43.5 10 15.0 F 1~ 230 60 1550 9 34 0.22 -30 to +40 G 1~ 230 50 1300 16 60 0.42 -30 to +40 M4Q045-CF01 -75 D 1.3 54 87 43.5 10 15.0 H 1~ 230 60 1550 16 58 0.36 -30 to +40 I 1~ 230 50 1300 18 70 0.48 -30 to +40 M4Q045-DA01 -75 E 1.6 59 93 43.5 10 15.0 J 1~ 230 60 1550 18 62 0.42 -30 to +40 K 1~ 230 50 1300 23 86 0.62 -30 to +40 M4Q045-DA05 -75 F 1.6 59 93 43.5 10 15.0 L 1~ 230 60 1550 25 80 0.55 -30 to +40 M 1~ 230 50 1300 25 90 0.62 -30 to +40 M4Q045-EA01 -75 G 2.0 69 103 44.0 10 15.5 N 1~ 230 60 1550 26 80 0.55 -30 to +40 O 1~ 230 50 1300 34 110 0.75 -30 to +40 M4Q045-EF01 -75 H 2.2 92 125 61.0 10 33.0 P 1~ 230 60 1550 34 100 0.65 -30 to +40 subject to alterations 26 Foot measure ±2 E M4 B side A side 3x120° M4 K M4 F 3x120° A M4 18 B 67 Foot measure 83 304 Axial impeller Guard grille Basket guard grille Wall ring Mounting bracket p. 377 p. 378 p. 378 p. 379 p. 380 M4 M4 71,4 13 Combination: Motor axial impeller Curve Nominal voltage 1500 Frequency 85 Speed/rpm 48 51 Power output Power input Current draw Ø3,6 M4 (4x) Ø25,4 Perm. amb. temp. Mass 11,5 M4 Square shaded-pole motors Frigo design (specially for spare parts requirements) – Foot mounting: Track dimension 18 mm (height 48 mm) – Bearing shields: B-side, tapped holes 3 x M4, diameter of pitch circle 71.4 mm; mounting of guard grille and wall ring on A-side bearing shield; M4 knurled hex nuts (2x) are enclosed in loose form – Type of protection: IP 42 2 – Electrical connection: Jacketed cable 3 x 0.5 mm with brass lead tips – Product conforming to standard: CE – Approvals: VDE – Curves: Page 308 Nominal data Dimensions Type p.302 VAC Hz rpm W W A °C kg AB F K A 1~ 230 50 1300 5 29 0.19 -30 to +40 M4Q045-BD01 -A4 A 0.9 48.5 76 12 15 B 1~ 230 60 1550 5 26 0.17 -30 to +40 C 1~ 230 50 1300 7 31 0.20 -30 to +40 M4Q045-CA01 -N4 B 1.1 48.5 82 10 15 D 1~ 230 60 1550 8 30 0.20 -30 to +40 E 1~ 230 50 1300 10 36 0.25 -30 to +40 M4Q045-CA03 -A4 C 1.2 48.5 82 10 15 F 1~ 230 60 1550 9 34 0.22 -30 to +40 G 1~ 230 50 1300 16 60 0.42 -30 to +40 M4Q045-CF01 -A4 D 1.3 48.5 87 10 15 H 1~ 230 60 1550 16 58 0.36 -30 to +40 I 1~ 230 50 1300 18 70 0.48 -30 to +40 M4Q045-DA01 -A4 E 1.6 48.5 93 10 15 J 1~ 230 60 1550 18 62 0.42 -30 to +40 K 1~ 230 50 1300 23 86 0.62 -30 to +40 M4Q045-DA05 -A4 F 1.6 48.5 93 10 15 L 1~ 230 60 1550 25 80 0.55 -30 to +40 M 1~ 230 50 1300 25 90 0.62 -30 to +40 M4Q045-EA01 -A4 G 2.0 49.0 103 10 16 N 1~ 230 60 1550 26 80 0.55 -30 to +40 O 1~ 230 50 1300 34 110 0.75 -30 to +40 M4Q045-EF01 -A4 H 2.2 66.0 125 10 33 P 1~ 230 60 1550 34 100 0.65 -30 to +40 subject to alterations 71,4 B side A side M4 K 1500 85 F M4 A 18 B 67 Foot measure 83 305 Axial impeller Guard grille Basket guard grille Wall ring Mounting bracket p. 377 p. 378 p. 378 p. 379 p. 380 3x120° M4 Combination: 13 48 Motor axial impeller Curve Nominal voltage Frequency Speed/rpm M4(4x) Ø3,6 Ø25,4 Power output Power input Current draw Perm. amb. temp. Mass EC axial AC axial AC axial AC axial General Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial fans AC axial fans S series A series K series S series information Square shaded-pole motors Plug terminal design – Foot mounting: Track dimension 26 mm (height 51 mm) – Type of protection: IP 42 – Electrical connection: Rast 5.6 mm terminal connector, 2.8 x 0.5 mm blade terminal; connection lines available in 420 mm to 4970 mm lengths – Product conforming to standard: CE – Approvals: VDE (put into operation with ebm-papst connection line only!) – Curves: Page 308 Nominal data Dimensions Type p.302 VAC Hz rpm W W A °C kg BE F K A 1~ 230 50 1300 5 29 0.19 -30 to +40 M4Q045-BD01 -08 A 0.9 76 43.5 12 15 B 1~ 230 60 1550 5 26 0.17 -30 to +40 C 1~ 230 50 1300 7 31 0.20 -30 to +40 M4Q045-CA01 -08 B 1.1 82 43.5 10 15 D 1~ 230 60 1550 8 30 0.20 -30 to +40 E 1~ 230 50 1300 10 36 0.25 -30 to +40 M4Q045-CA03 -08 C 1.2 82 43.5 10 15 F 1~ 230 60 1550 9 34 0.22 -30 to +40 G 1~ 230 50 1300 16 60 0.42 -30 to +40 M4Q045-CF01 -08 D 1.3 87 43.5 10 15 H 1~ 230 60 1550 16 58 0.36 -30 to +40 I 1~ 230 50 1300 18 70 0.48 -30 to +40 (1) M4Q045-DA01 -52 E 1.6 93 43.5 10 15 J 1~ 230 60 1550 18 62 0.42 -30 to +40 K 1~ 230 50 1300 23 86 0.62 -30 to +40 (1) M4Q045-DA05 -52 F 1.6 93 43.5 10 15 L 1~ 230 60 1550 25 80 0.55 -30 to +40 M 1~ 230 50 1300 25 90 0.62 -30 to +40 (1) M4Q045-EA01 -52 G 2.0 103 44.0 10 16 N 1~ 230 60 1550 26 80 0.55 -30 to +40 O 1~ 230 50 1300 34 110 0.75 -30 to +40 (1) M4Q045-EF01 -52 H 2.2 125 61.0 10 33 P 1~ 230 60 1550 34 100 0.65 -30 to +40 subject to alterations (1) Foot mounting possible on A or B side 14,5 9 K B side A side Blade terminal 2.8 x 0.5 mm Rast 5.6 mm PE According to VDE, motor must be put into operation with ebm-papst connection M4 5 F line only! 26 9 E Foot measure 67 B 83 306 Connection lead Axial impeller Guard grille Basket guard grille Wall ring Mounting bracket p. 376 p. 377 p. 378 p. 378 p. 379 p. 380 Combination: Motor axial impeller 20 18 Curve Nominal voltage Frequency Speed/rpm Power output Power input 11,5 51 Current draw Perm. amb. temp. Mass M4(4x) Ø3,6 Ø25,4 Square shaded-pole motors UL and CSA design – Description: Designs with UL/CSA approvals; connection lines, temperature monitor and dynamo wire are UL/CSA-approved components – Foot mounting: Track dimension 26 mm (height 51 mm) – Type of protection: IP 42 – Electrical connection: Jacketed cable 3 x AWG20 with brass lead tips – Product conforming to standard: UL547, UL1004, CSA C22.2 No. 100, CSA C22.2 No. 77, CE – Approvals: UL, CSA – Curves: Page 308 – Drawing: See standard design on page 302 Nominal data Dimensions Type p.302 VAC Hz rpm W W A °C kg BE K A 1~ 115 50 1300 5 29 0.38 -30 to +40 (2) M4Q045-BD03 -04 A 0.9 76 42 15 B 1~ 115 60 1550 5 26 0.35 -30 to +40 A 1~ 230 50 1300 5 29 0.19 -30 to +40 (2) M4Q045-BD01 -04 A 0.9 76 42 15 B 1~ 230 60 1550 5 26 0.17 -30 to +40 C 1~ 115 50 1300 7 31 0.40 -30 to +40 (2) M4Q045-CA17 -04 B 1.1 82 42 15 D 1~ 115 60 1550 8 30 0.40 -30 to +40 C 1~ 230 50 1300 7 31 0.20 -30 to +40 (2) M4Q045-CA01 -04 B 1.1 82 42 15 D 1~ 230 60 1550 8 30 0.20 -30 to +40 E 1~ 115 50 1300 10 36 0.50 -30 to +40 (2) M4Q045-CA27 -04 C 1.2 82 42 15 F 1~ 115 60 1550 9 34 0.45 -30 to +40 E 1~ 230 50 1300 10 36 0.25 -30 to +40 (2) M4Q045-CA25 -04 C 1.2 82 42 15 F 1~ 230 60 1550 9 34 0.22 -30 to +40 G 1~ 115 50 1300 16 60 0.80 -30 to +40 (2) M4Q045-CF07 -04 D 1.3 87 42 15 H 1~ 115 60 1550 16 58 0.74 -30 to +40 G 1~ 230 50 1300 16 60 0.42 -30 to +40 (2) M4Q045-CF01 -04 D 1.3 87 42 15 H 1~ 230 60 1550 16 58 0.36 -30 to +40 I 1~ 115 50 1300 18 70 0.98 -30 to +40 (1)(3) M4Q045-DA11 -04 E 1.6 93 54 15 J 1~ 115 60 1550 18 62 0.87 -30 to +40 I 1~ 230 50 1300 18 70 0.48 -30 to +40 (1)(3) M4Q045-DA01 -04 E 1.6 93 54 15 J 1~ 230 60 1550 18 62 0.42 -30 to +40 K 1~ 115 50 1300 23 86 1.25 -30 to +40 (1)(3) M4Q045-DA13 -04 F 1.6 93 54 15 L 1~ 115 60 1550 25 80 1.10 -30 to +40 K 1~ 230 50 1300 23 86 0.62 -30 to +40 (1)(3) M4Q045-DA05 -04 F 1.6 93 54 15 L 1~ 230 60 1550 25 80 0.55 -30 to +40 M 1~ 115 50 1300 25 90 1.25 -30 to +40 (1)(3) M4Q045-EA03 -04 G 2.0 103 59 16 N 1~ 115 60 1550 26 80 1.10 -30 to +40 M 1~ 230 50 1300 25 90 0.62 -30 to +40 (1)(3) M4Q045-EA01 -04 G 2.0 103 59 16 N 1~ 230 60 1550 26 80 0.55 -30 to +40 O 1~ 115 50 1300 34 110 1.50 -30 to +40 (1)(3) M4Q045-EF03 -04 H 2.2 125 79 33 P 1~ 115 60 1550 34 100 1.35 -30 to +40 O 1~ 230 50 1300 34 110 0.75 -30 to +40 (1)(3) M4Q045-EF01 -04 H 2.2 125 79 33 P 1~ 230 60 1550 34 100 0.65 -30 to +40 subject to alterations (1) A and B-side foot mounting possible (2) File No. E 171165 (3) File No. E 76226 307 Axial impeller Guard grille Basket guard grille Wall ring Mounting bracket p. 377 p. 378 p. 378 p. 379 p. 380 Combination: Motor axial impeller Curve Nominal voltage Frequency Speed/rpm Power output Power input Current draw Perm. amb. temp. Mass EC axial AC axial AC axial AC axial General Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial fans AC axial fans S series A series K series S series information Square shaded-pole motors Air performance curves (measured in wall ring) M4Q045-BD01-**, Ø 154, 50 Hz M4Q045-BD01-**, Ø 154, 60 Hz A B 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 10 3 3 50 100 150 200 250 [m /h] 50 100 150 200 250 [m /h] 22° 28° 34° 22° 28° 34° M4Q045-BD01-**, Ø 172, 50 Hz M4Q045-BD01-**, Ø 172, 60 Hz A B 70 50 60 40 50 30 40 30 20 20 10 10 3 3 50 100 150 200 250 300 [m /h] 50 100 150 200 250 300 350 [m /h] 22° 28° 34° 22° 28° 34° 308 [Pa] [Pa] [Pa] [Pa] M4Q045-BD01-**, Ø 200, 50 Hz M4Q045-BD01-**, Ø 200, 60 Hz A B 50 50 40 40 30 30 20 20 10 10 3 3 [m /h] 50 100 150 200 250 300 350 400 [m /h] 50 100 150 200 250 300 350 22° 28° 22° 28° M4Q045-CA01-**, Ø 200, 50 Hz M4Q045-CA01-**, Ø 200, 60 Hz C D 70 70 60 60 50 50 40 40 30 30 20 20 10 10 3 3 [m /h] 100 200 300 400 [m /h] 100 200 300 400 22° 28° 34° 22° 28° 34° 309 [Pa] [Pa] [Pa] [Pa] EC axial AC axial AC axial AC axial General Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial fans AC axial fans S series A series K series S series information Square shaded-pole motors Air performance curves (measured in wall ring) M4Q045-CA01-**, Ø 230, 50 Hz M4Q045-CA01-**, Ø 230, 60 Hz C D 40 60 50 30 40 20 30 20 10 10 3 3 100 200 300 400 [m /h] 100 200 300 400 500 [m /h] 22° 22° M4Q045-CA03-**, Ø 230, 50 Hz M4Q045-CA03-**, Ø 230, 60 Hz E F 60 80 70 50 60 40 50 30 40 30 20 20 10 10 3 3 100 200 300 400 500 600 700 [m /h] 100 200 300 400 500 600 700 [m /h] 22° 28° 34° 22° 28° 34° 310 [Pa] [Pa] [Pa] [Pa] M4Q045-CA03-**, Ø 254, 50 Hz M4Q045-CA03-**, Ø 254, 60 Hz E F 35 60 30 50 25 40 20 30 15 20 10 10 5 3 3 100 200 300 400 500 600 [m /h] 100 200 300 400 500 600 700 [m /h] 22° 22° M4Q045-CF01-**, Ø 254, 50 Hz M4Q045-CF01-**, Ø 254, 60 Hz G H 100 80 80 60 60 40 40 20 20 3 3 200 400 600 800 [m /h] 200 400 600 800 [m /h] 22° 28° 22° 28° 311 [Pa] [Pa] [Pa] [Pa] EC axial AC axial AC axial AC axial General Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial fans AC axial fans S series A series K series S series information Square shaded-pole motors Air performance curves (measured in wall ring) M4Q045-DA01-**, Ø 254, 50 Hz M4Q045-DA01-**, Ø 254, 60 Hz I J 100 100 80 80 60 60 40 40 20 20 3 3 [m /h] 200 400 600 800 1000 [m /h] 200 400 600 800 22° 28° 34° 22° 28° 34° I K J L M4Q045-DA01-** / -DA05-**, Ø 300, 50 Hz M4Q045-DA01-** / -DA05-**, Ø 300, 60 Hz 100 40 80 L K 30 60 I 20 J 40 10 20 3 3 200 400 600 800 1000 1200 [m /h] 200 400 600 800 1000 1200 [m /h] 22° 22° 312 [Pa] [Pa] [Pa] [Pa] M4Q045-EA01-**, Ø 300, 50 Hz M4Q045-EA01-**, Ø 300, 60 Hz M N 50 100 40 80 30 60 20 40 10 20 3 3 200 400 600 800 1000 1200 [m /h] 200 400 600 800 1000 1200 1400 [m /h] 22° 22° M4Q045-EF01-**, Ø 300, 50 Hz M4Q045-EF01-**, Ø 300, 60 Hz O P 80 100 80 60 60 40 40 20 20 3 3 400 800 1200 1600 [m /h] 400 800 1200 1600 [m /h] 22° 28° 34° 22° 28° 34° 313 [Pa] [Pa] [Pa] [Pa] EC axial AC axial AC axial AC axial General Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial fans AC axial fans S series A series K series S series information 314

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products