MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — Solder and P.C. Terminals (Momentary Action) 5 AMP. (S.P.) PS 1 AMP (D.P.) SERIES 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type Description P/N Color PS 1 - Solder lug 1 - One 0 - No Cap 0 - No Cap B - Gold/Nickel/Brass W-KN-16 Black 2 - Printed Circuit 2 - Two 1 - .200 Dia. 1 - Black Small Cap G - Gold/Nickel/ W-KN-16A White .200 Terminals 2 - .375 Dia. 2 - White Silver W-KN-16B Red 3 - .450 Sq. 3 - Ted Q - Coin Silver 4 - .310 Dia. W-KN-32 Black 5 - .780 Sq. Medium Cap W-KN-32A White .310 Single pole circuit rated 5 amps, double pole circuit rated 1 amp. W-KN-32B Red Ratings are 0.4 VA — 28 BAC or DC W-KN-17 Black Supplied with .90” square black bezel as Standard Large Cap W-KN-17A White .375 EXAMPLES: W-KN-17B Red PS1-100Q = One-pole, S.L., 5 amp., No Cap, W-KN-18 Black Coin Silver Contacts Square Cap W-KN-18A White PS2-221B = Two-pole, PC, .4 VA, .375 Dia., Black Cap., .450 Gold/Nickel/Brass Contacts W-KN-18B Red W-NU-29A W-NU-30A DECORATIVE FACE NUTS NEW .780” SQUARE W-KN-52 Black (SEE NOTE UNDER MATERIALS) .780 Square CAP AND BEZEL W-KN-52A White Cap W-KN-52B Red SPECIFICATIONS MATERIALS .90 Square Bezel Black Contact Rating – Letter codes G and Q (1 Pole) 5 Case — Diallyl Phthalate. Bezel W-BZ-21 amp resistive @ 125 VAC (U.L. recognized, CSA Bushing — Brass, nickel plated. certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 Housing — Stainless steel. amp resistive @ 125 VAC (U.L. recognized, CSA Plunger — Thermoplastic. certified) or 1 amp resistive @ 28 VDC. Solder Lug Terminal Letter codes B and G – (1 and 2 Poles) 0.4 Common Contact — Refer to contact material Volt-amps (VA) maximum @ 28 V max. (AC or table above. DC). Center & End Contact — Refer to contact Contact Resistance – 50 milliohms maximum. material table above. Insulation Resistance – 1,000 megohms min- Hardware — (2) Hex nuts W-NU-11, brass nickel imum. plated. (1) Internal tooth lockwasher W-WA-16, Dielectric Strength – 1,000 volts RMS minimum steel chromium plated. (1) Locking Ring W-RI-16, at sea level. C.R.S. nickel plated. Printed Circuit Terminal Electrical Life – 60,000 cycles minimum at full Decorative Face Nuts — Brass, bright chrome load-resistive. plated. See Page 16 for complete dimensions. Maximum Allowable Installation Force on Plunger – 10 pounds. Multi-pole contacts do not make and break simultaneously. 4 Litho in U.S.A GG MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — 5 AMP. (S.P.) PS P.C. Terminals (Momentary Action) 0.4VA SERIES RIGHT ANGLE MOUNT IN P.C. BOARDS (HORIZONTAL) PS5 VIEW A-A PS6 VIEW A-A Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type 0 - No Cap 0 - No Cap B - Gold/Nickel/Brass 1 - .200 Dia. 1 - Black 5 - Rt. Angle P.C. Mount G - Gold/Nickel/Silver PS 1 - One 2 - .375 Dia. 2 - White 6 - Rt. Angle P.C. Mount Q - Coin Silver 3 - .450 Sq. 3 - Red 4 - .310 Dia. Rating is 5 amps — 125 VAC or 28 VDC. Ratings are 0.4 VA — 28 VAC or DC. ORDERING EXAMPLES: Gold/Nickel/ PS5-100G = (Rt. Angle P.C. mount 5 amp.) One-pole No Cap No Color Silver Contacts PS 5 - 1 0 0 G PS6-121Q = (Rt. Angle P.C. mount 5 amp.) One-pole .375 Dia. Black Cap Coin Silver Contacts PS 6 - 1 2 1 Q Description P/N Color W-KN-16 Black SPECIFICATIONS MATERIALS Small Cap W-KN-16A White .200 Contact Rating — Letter codes G and Q — 5 amp Case — Diallyl Phthalate. W-KN-16B Red resistive @ 125 VAC or 28 VDC. Bushing — Brass, nickel plated. W-KN-32 Black Letter codes B and G — 0.4 volts-amps (VA) Medium Cap Housing — Stainless steel. W-KN-32A White maximum @ 28 VAC or DC. .310 W-KN-32B Red Plunger — Thermoplastic. Contact Resistance — 50 milliohms maximum. W-KN-17 Black Common Contact — Refer to contact material Insulation Resistance — 1,000 megohms minimum. Large Cap W-KN-17A White .375 table above. Dielectric Strength — 1,000 volts RMS minimum at W-KN-17B Red sea level. Center & End Contact — Refer to contact material W-KN-18 Black table above. Square Cap Electrical Life — 60,000 cycles minimum at full W-KN-18A White .450 load. W-KN-18B Red Maximum Allowable Installation Force on Plunger — 10 pounds. Litho in U.S.A GG 5 MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — P.C. Terminals (Momentary Action) 5 AMP. (S.P.) PS 1 AMP. (D.P.) SERIES 0.4VA RIGHT ANGLE P.C. MOUNT SWITCHES Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type 9 - Horizontal Right Angle 0 - No Cap 0 - No Cap B - Gold/Nickel/Brass 10 - Vertical Right Angle 1 - One 1 - .200 Dia. 1 - Black G-Gold/Nickel/Silver PS (.100 Terminal Spacing) 2 - .375 Dia. 2 - White Q - Coin Silver 11 - Vertical Right Angle 0.4 VA 2 - Two 3 - .450 Sq. 3 - Red (.150 Terminal Spacing) 4 - .310 Dia. Single pole circuit rated 5 amps, double pole circuit rated 1 amp. Ratings are 0.4 VA — 28 VAC or DC. ORDERING EXAMPLES: Gold/Nickel/ PS9-100B = (PC mounted 0.4 VA) One-pole No Cap No Color Brass Contacts PS 9 - 1 0 0 B PS10-221Q= (PC mounted 1 amp.) Two-pole .375 Dia. Black Cap Coin Silver Contacts PS 10 - 2 2 1 Q SPECIFICATIONS MATERIALS Contact Rating — Letter codes G and Q (1 Pole) 5 Case — Diallyl Phthalate. amp resistive @ 125 VAC (U.L. recognized, CSA Bushing — Brass, nickel plated. certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp Housing — Stainless steel. resistive @ 125 VAC (U.L. recognized, CSA certified) or 1 amp resistive @ 28 VDC. Plunger — Thermoplastic. Letter codes B and G — (1 and 2 Poles) 0.4 Volt- Common Contact — Refer to contact material amps (VA) maximum @ 28 V maximum (AC or DC). table above. Contact Resistance — 50 milliohms maximum. Insulation Resistance — 1,000 megohms minimum. Center & End Contact — Refer to contact material Dielectric Strength — 1,000 volts RMS minimum at table above. Description P/N Color sea level. W-KN-16 Black Electrical Life — 60,000 cycles minimum at full load- Small Cap W-KN-16A White resistive. .200 W-KN-16B Red Maximum Allowable Installation Force on Plunger — 10 pounds. W-KN-32 Black Medium Cap Multi-pole contacts do not make and break simul- W-KN-32A White .310 taneously. W-KN-32B Red W-KN-17 Black Large Cap W-KN-17A White .375 W-KN-17B Red W-KN-18 Black Square Cap W-KN-18A White .450 W-KN-18B Red Right Angle P.C. Terminal EPOXY SEAL STD. FOR THESE SERIES 6 Litho in U.S.A GG MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — P.C. Terminals (Momentary Action) 5 AMP. (S.P.) PS 1 AMP. (D.P.) SERIES 0.4VA RIGHT ANGLE P.C. MOUNT SWITCHES PS 9 1 Pole P.C. Mounting ONE POLE EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS. PS 9 2 Pole P.C. Mounting TWO POLE EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS. PS 10 1 Pole P.C. Mounting ONE POLE EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS. PS 10 2 Pole P.C. Mounting TWO POLE EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS. PS 11 1 Pole P.C. Mounting ONE POLE EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS. PS 11 2 Pole P.C. Mounting TWO POLE EPOXY SEALED P.C. TERMINALS ARE SUPPLIED AS STANDARD FOR THESE OPTIONS. Litho in U.S.A GG 7 MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — P.C. Terminals (Momentary Action) 5 AMP. (S.P.) PS 1 AMP. (D.P.) SERIES 0.4 VA VERTICAL P.C. MOUNT (.460 x .620 BRACKET) PS7 (LONG BUSHING) SP DP 1 Pole P.C. Mounting 2 Pole P.C. Mounting PS8 (SHORT BUSHING) SP DP Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type 0 - No Cap 0 - No Cap B - Gold/Nickel/Brass 1 - One 1 - .200 Dia. 1 - Black 7 - PC Mounted G - Gold/Nickel/Silver PS 2 - Two 2 - .375 Dia. 2 - White 8 - PC Mounted Q - Coin Silver 3 - .450 Sq. 4 - .310 Dia. Single pole circuit rated 5 amps, double pole circuit rated 1 amp. Ratings are 0.4 VA — 28 VAC or DC. Description P/N Color ORDERING EXAMPLES: Gold/Nickel/ W-KN-16 Black PS7-100G = (PC mounted 5 amp.) One-pole No Cap No Color Silver Contacts Small Cap W-KN-16A White .200 W-KN-16B Red PS 7 - 1 0 0 G W-KN-32 Black Medium Cap W-KN-32A White Gold/Nickel/ .310 PS8-221B = (PC mounted 0.4 VA) Two-pole .375 Dia. Black Cap Brass Contacts W-KN-32B Red W-KN-17 Black Large Cap W-KN-17A White .375 PS 8 - 2 2 1 B W-KN-17B Red W-KN-18 Black Square Cap SPECIFICATIONS MATERIALS W-KN-18A White .450 Contact Rating – Letter codes G and Q (1 Pole) 5 Case — Diallyl Phthalate. W-KN-18B Red amp resistive @ 125 VAC (U.L. recognized, CSA Bushing — Brass, nickel plated. certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp Housing — Stainless steel. resistive @ 125 VAC (U.L. recognized, CSA certified) or Plunger — Thermoplastic. 1 amp resistive @ 28 VDC. Common Contact — Refer to contact material Letter codes B and G – (1 and 2 Poles) 0.4 Volt- Printed Circuit Terminal table above. amps (VA) maximum @ 28 V maximum (AC or DC). Center & End Contact — Refer to contact material Contact Resistance – 50 milliohms maximum. table above. Insulation Resistance – 1,000 megohms minimum. Dielectric Strength – 1,000 volts RMS minimum at EPOXY SEAL sea level. STD. FOR Electrical Life – 60,000 cycles minimum at full load- THIS SERIES resistive. Maximum Allowable Installation Force on Plunger – 10 pounds. Multi-pole contacts do not make and break simul- taneously. 8 Litho in U.S.A GG MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — P.C. Terminals (Momentary Action) 5 AMP. (S.P.) PS 1 AMP (D.P.) SERIES 0.4 VA VERTICAL P.C. MOUNT (.630 x .620 BRACKET) PS71 (LONG BUSHING) SP DP 1 Pole P.C. Mounting 2 Pole P.C. Mounting PS81 (SHORT BUSHING) SP DP Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type 0 - No Cap 0 - No Cap B - Gold/Nickel/Brass 71 - PC Mounted 1 - One 1 - .200 Dia. 1 - Black G - Gold/Nickel/Silver PS81-PC Mounted 2-Two 2 - .375 Dia. 2 - White Q - Coin Silver 3 - .450 Sq. 3 - Red 4 - .310 Dia. Single pole circuit rated 5 amps, double pole circuit rated 1 amp. Ratings are 0.4 VA — 28 VAC or DC. Description P/N Color ORDERING EXAMPLES: Gold/Nickel/ W-KN-16 Black PS71-100B= (PC mounted 0.4 VA) One-pole No Cap No Color Brass Contacts Small Cap W-KN-16A White .200 W-KN-16B Red PS 71 - 1 0 0 B W-KN-32 Black Medium Cap W-KN-32A White .310 PS81-221Q= (PC mounted 1 amp.) Two-pole .375 Dia. Black Cap Coin Silver Contacts W-KN-32B Red W-KN-17 Black Large Cap W-KN-17A White .375 PS 81 - 2 2 1 Q W-KN-17B Red W-KN-18 Black SPECIFICATIONS MATERIALS Square Cap W-KN-18A White .450 Contact Rating – Letter codes G and Q (1 Pole) 5 Case — Diallyl Phthalate. W-KN-18B Red amp resistive @ 125 VAC (U.L. recognized, CSA Bushing — Brass, nickel plated. certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp Housing — Stainless steel. resistive @ 125 VAC (U.L. recognized, CSA certified) or Plunger — Thermoplastic. 1 amp resistive @ 28 VDC. Common Contact — Refer to contact material Letter codes B and G – (1 and 2 Poles) 0.4 Volt- Printed Circuit Terminal table above. amps (VA) maximum @ 28 V maximum (AC or DC). Contact Resistance – 50 milliohms maximum. Center & End Contact — Refer to contact material Insulation Resistance – 1,000 megohms minimum. table above. Dielectric Strength – 1,000 volts RMS minimum at EPOXY SEAL sea level. STD. FOR THIS SERIES Electrical Life – 60,000 cycles minimum at full load- resistive. Maximum Allowable Installation Force on Plunger – 10 pounds. Multi-pole contacts do not make and break simul- taneously. Litho in U.S.A GG 9 MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — P.C. Terminals (Momentary Action) 5 AMP. (S.P.) PS 1 AMP. (D.P.) SERIES 0.4 VA VERTICAL P.C. MOUNT (.460 x .750 BRACKET) PS72 (LONG BUSHING) SP DP 1 Pole P.C. Mounting 2 Pole P.C. Mounting PS82 (SHORT BUSHING) SP DP Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type 0 - No Cap 0 - No Cap B - Gold/Nickel/Brass 1-One 1-.200 Dia. 1-Black 72 - PC Mounted G - Gold/Nickel/Silver PS 2 - Two 2 - .375 Dia. 2 - White 82 - PC Mounted Q - Coin Silver 3 - .450 Sq. 3 - Red 4 - .310 Dia. Single pole circuit rated 5 amps, double pole circuit rated 1 amp. Ratings are 0.4 VA — 28 VAC or DC. ORDERING EXAMPLES: Description P/N Color PS72-100Q= (PC mounted 5 amp.) One-pole No Cap No Color Coin Silver Contacts W-KN-16 Black Small Cap W-KN-16A White .200 W-KN-16B Red PS 72 - 1 0 0 Q W-KN-32 Black Medium Cap W-KN-32A White Gold/Nickel/ .310 PS82-221B= (PC mounted 0.4 VA) Two-pole .375 Dia. Black Cap Brass Contacts W-KN-32B Red W-KN-17 Black Large Cap W-KN-17A White PS 82 - 2 2 1 B .375 W-KN-17B Red W-KN-18 Black SPECIFICATIONS MATERIALS Square Cap W-KN-18A White .450 Contact Rating – Letter codes G and Q (1 Pole) 5 Case — Diallyl Phthalate. W-KN-18B Red amp resistive @ 125 VAC (U.L. recognized, CSA Bushing — Brass, nickel plated. certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp Housing — Stainless steel. resistive @ 125 VAC (U.L. recognized, CSA certified) or Plunger — Thermoplastic. 1 amp resistive @ 28 VDC. Common Contact — Refer to contact material Letter codes B and G – (1 and 2 Poles) 0.4 Volt- Printed Circuit Terminal table above. amps (VA) maximum @ 28 V maximum (AC or DC). Center & End Contact — Refer to contact material Contact Resistance – 50 milliohms maximum. table above. Insulation Resistance – 1,000 megohms minimum. Dielectric Strength – 1,000 volts RMS minimum at EPOXY SEAL sea level. STD. FOR Electrical Life – 60,000 cycles minimum at full load- THIS SERIES resistive. Maximum Allowable Installation Force on Plunger – 10 pounds. Multi-pole contacts do not make and break simul- taneously. 10 Litho in U.S.A GG MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — P.C. Terminals (Momentary Action) 5 AMP. (S.P.) PS 1 AMP (D.P.) SERIES 0.4 VA VERTICAL P.C. MOUNT (.630 x .750 BRACKET) PS73 (LONG BUSHING) SP DP 1 Pole P.C. Mounting 2 Pole P.C. Mounting PS83 (SHORT BUSHING) SP DP Basic P/N Terminal Type Poles Cap Size Cap Color Contact Material-Type 0 - No Cap 0 - No Cap B - Gold/Nickel/Brass 1 - One 1 - .200 Dia. 1 - Black G - Gold/Nickel/Silver 73 - PC Mounted PS 2 - Two 2 - .375 Dia. 2 - White 83 - PC Mounted Q - Coin Silver 3 - .450 Sq. 3 - Red 4 - .310 Dia. Single pole circuit rated 5 amps, double pole circuit rated 1 amp. Ratings are 0.4 VA — 28 VAC or DC. Description P/N Color ORDERING EXAMPLES: Gold/Nickel/ W-KN-16 Black PS73-100G= (PC mounted 5 amp.) One-pole No Cap No Color Silver Contacts Small Cap W-KN-16A White .200 W-KN-16B Red PS73 -1 0 0 G W-KN-32 Black Medium Cap W-KN-32A White Gold/Nickel/ .310 PS83-221B= (PC mounted 0.4 VA) Two-pole .375 Dia. Black Cap Brass Contacts W-KN-32B Red W-KN-17 Black Large Cap W-KN-17A White .375 PS83 -2 2 1 B W-KN-17B Red W-KN-18 Black SPECIFICATIONS MATERIALS Square Cap W-KN-18A White .450 Contact Rating – Letter codes G and Q (1 Pole) 5 Case — Diallyl Phthalate. W-KN-18B Red amp resistive @ 125 VAC (U.L. recognized, CSA Bushing — Brass, nickel plated. certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp Housing — Stainless steel. resistive @ 125 VAC (U.L. recognized, CSA certified) or Plunger — Thermoplastic. 1 amp resistive @ 28 VDC. Common Contact — Refer to contact material Letter codes B and G – (1 and 2 Poles) 0.4 Volt- Printed Circuit Terminal table above. amps (VA) maximum @ 28 V maximum (AC or DC). Contact Resistance – 50 milliohms maximum. Center & End Contact — Refer to contact material Insulation Resistance – 1,000 megohms minimum. table above. Dielectric Strength – 1,000 volts RMS minimum at EPOXY SEAL sea level. STD. FOR THIS SERIES Electrical Life – 60,000 cycles minimum at full load- resistive. Maximum Allowable Installation Force on Plunger – 10 pounds. Multi-pole contacts do not make and break simul- taneously. Litho in U.S.A GG 11 MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — Solder and P.C. Terminals (Momentary Action) 5 AMP. (S.P.) PS 1 AMP (D.P.) SERIES 0.4 VA SNAP-IN MOUNT PS15 SHOWN PS14 SHOWN w/RAISED CAP w/FLUSH CAP LED Not Included Optional Features Cap Configuration Basic P/N Terminal-Rating Poles Cap Size Cap Color Bezel Color & Type Contact Material-Type PS 14 - Raised Cap 1 - One 0 - No Cap 0 - No Cap 1 - White B - Gold/Nickel/Brass Solder Lug 2 - Two 1 - .450 Sq. 1 - White 2 - Black 15 - Flush Cap 2-Black 3-Red Solder Lug 3 - Red 4 - Black or LED 16 - Raised Cap G - Gold/Nickel/Silver PC Terminals Q - Coin Silver 17 - Flush Cap PC Terminals Single pole circuit rated 5 amps, double pole circuit rated 1 amp. Ratings are 0.4 VA — 28 BAC or DC. Flush cap is flush to bezel, not to mounting bracket. EXAMPLES: PS14-100Q = Raised Cap, Solder Lug Terminals, 5 Amp, Single Pole, No Cap, Coin Silver Contacts PS14-1134B = Raised Cap, Solder Lug Terminals, 0.4 VA Rating, Single Pole, .450 Square Red Cap, Black Bezel for LED, Gold/Brass Contact Material Solder Lug Terminal SPECIFICATIONS MATERIALS Contact Rating – Letter codes G and Q (1 Pole) 5 Case — Diallyl Phthalate. amp resistive @ 125 VAC (U.L. recognized, CSA Bushing — Brass, nickel plated. certified) or 5 amp resistive @ 28 VDC. (2 pole) 1 amp Housing — Stainless steel. resistive @ 125 VAC (U.L. recognized, CSA certified) or Plunger — Thermoplastic. 1 amp resistive @ 28 VDC. Letter codes B and G – (1 and 2 Poles) 0.4 Volt- Pushbutton Cap — Molded nylon. amps (VA) maximum @ 28 V maximum (AC or DC). Bezel — Molded nylon. PC Terminal Contact Resistance – 50 milliohms maximum. Common Contact — Refer to contact material Insulation Resistance – 1,000 megohms minimum. table above. Dielectric Strength – 1,000 volts RMS minimum at sea level. Center & End Contact — Refer to contact Electrical Life – 60,000 cycles minimum at full load- material table above. resistive. Maximum Allowable Installation Force on Plunger – 10 pounds. Multi-pole contacts do not make and break simultaneously. 12 Litho in U.S.A GG MINIATURE SWITCHES Sensitive Snap-Action Pushbutton Switches — Solder and P.C. Terminals (Momentary Action) APPROXIMATE DIMENSIONS (For Optional Bezel Types Shown on Page 12) OPTIONAL BEZEL TYPE OPTIONAL BEZEL TYPE 1, 2, 3 (SEE TABLE) 1, 2, 3 (SEE TABLE) PS14 Shown w/Raised Cap PS15 Shown w/Flush Cap Catalog No. Color Catalog No. Color W-BZ-12 Black W-BZ-12 Black W-BZ-12A White W-BZ-12A White W-BZ-12B Red W-BZ-12B Red OPTIONAL BEZEL TYPE 4 OPTIONAL BEZEL TYPE 4 FOR LED FOR LED PS17 Shown w/Flush Cap PS14 Shown w/Raised Cap SWITCHES SUPPLIED SWITCHES SUPPLIED WITHOUT LED LAMPS. WITHOUT LED LAMPS. Catalog No. Color Catalog No. Color W-BZ-15 Black W-BZ-15 Black OPTIONAL MOUNTING CLIP (For Use With PS14 Thru PS17 Series Only) • For thick plastic panel mount applications (.094” - .125” thick) • For availability consult Electroswitch. Litho in U.S.A GG 13