110 Watt Medical Features l Small 5 x 3 x 1.07 inches form factor l Ultra high Efficiency > 82% l 110 W universal input medical AC/DC l Low leakage current < 250 µA l Nemko, UL & CSA approvals to IEC60601 l EN55022-B, CISPR22-B, FCC Part15 Level B, IEC60601-1-2 l Cover kit accessory available Electrical Specifications AC Input 90-264 V, Universal Input Frequency 47-63 Hz Input Current 120 VAC: 2.4 A max. 230 VAC: 1.2 A max. Inrush Current 120 VAC: 35 A max. 230 VAC: 65 A max. Leakage Current 120 VAC: < 140 µA 230 VAC: < 250 µA Efficiency 120 VAC: 80% typical 230 VAC: 82% typical Hold-up Time 120 VAC: 15 ms 230 VAC: 22 ms 1 Output Power 80 to 110 W Line Regulation +/-0.3% Load Regulation V1: +/-1%, V2: +/-5%, V3 and V4: +/-7% Transient Response < 10%, 50% to 100% load change, 50/60 Hz, 50% duty cycle, 0.1 A/µs, recovery time < 1 ms Rise Time < 40 ms Set Point Tolerance V1: +/-3%, V2: +/-5, V3 & V4: +/-7% Over Current Protection 110 to 160% Over Voltage Protection 4.1 V +/-0.2 V for 3.3 V; 6.4 V +/-0.4 V for 5 V (For V1 & quad output model only) Short Circuit Protection Short term, autorecovery Switching Frequency Boost converter: 45 kHz typical Resonant converter: 45 kHz typical Operating Temperature 0 to 70°C, refer derating curve Storage Temperature -40 to +85°C Relative Humidity 95% Rh, noncondensing Altitude Operating: 10,000 ft.; Nonoperating: 40,000 ft. MTBF 1.97m Hours, Telcordia SR332 Issue-3 Isolation Voltage Min. 5757 VDC between input to output 1 Cooling Convection: 80 W; 150 LFM: 110 W 49 4EM-17-002 39-DE60-47823-002 / B1 1 1 2 Model Number Voltage Max. Load Max. Load Min. Load Ripple (Convection) (150 LFM) LFMVLT110-1300 V1=5.1 V 12.0 A 18.0 A 0.1 A 1% LFMVLT110-1301 V1=12 V 6.8 A 9.2 A 0.4 A 1% LFMVLT110-1302 V1=15 V 5.5 A 7.3 A 0.4 A 1% LFMVLT110-1303 V1=24 V 3.33 A 4.6 A 0.1 A 1% LFMVLT110-1304 V1=48 V 1.7 A 2.3 A 0.2 A 1% LFMVLT110-4300 V1=5.1 V, V2=12.4 V, V1=10.0 A, V2=3.0 A, V1=15.0 A, V2=4.1 A, V1=1.0 A, V2=0.1 A, 1% V3=-5.1 V, V4=-12.5 V V3=0.8 A, V4=0.8 A V3=1.1 A, V4=1.1 A V3=0.0 A, V4=0.0 A LFMVLT110-4301 V1=5.1 V, V2=23.5 V, V1=10.0 A, V2=2.0 A, V1=15.0 A, V2=2.75 A, V1=1.0 A, V2=0.1 A, 1% V3=12.5 V, V4=-12.5 V V3=0.8 A,V4=0.8 A V3=1.1 A, V4=1.1 A V3=0.0 A, V4=0.0 A LFMVLT110-4302 V1=5.1 V, V2=16 V, V1=10.0 A, V2=3.0 A, V1=15.0 A, V2=4.1 A, V1=1.0 A, V2=0.1 A, 1% V3=-5.1 V, V4=-16 V V3=0.8 A, V4=0.8 A V3=1.1 A, V4=1.1 A V3=0.0 A, V4=0.0 A LFMVLT110-4303 V1=5.1 V, V2=12.4 V, V1=10.0 A, V2=3.0 A, V1=15.0 A, V2=4.1 A, V1=1.0 A, V2=0.1 A, 1% V3=24 V, V4=-12.5 V V3=0.8 A, V4=0.8 A V3=1.1 A, V4=1.1 A V3=0.0 A, V4=0.0 A LFMVLT110-4304 V1=3.3 V, V2=5.1 V, V1=10.0 A, V2=3.0 A, V1=15.0 A, V2=4.1 A, V1=1.0 A, V2=0.1 A, V1=1.5%, V3=12.5 V, V4=-12.5 V V3=0.8 A, V4=0.8 A V3=1.1 A, V4=1.1 A V3=0.0 A, V4=0.0 A V2, V3 & V4=1% LFVLT80-CK metal cover kit accessory Connectors J1 Pin 1 AC NEUTRAL Pin 2 AC LINE Spade Connector EARTH J2 Pin 1, 2, 3, 4 V1 Pin 5, 6, 7, 8 RTN Pin 9, 10 V2 Pin 11 V3 Pin 12 V4 J3 Pin 1 RTN Pin 2 POWER FAIL Notes 1. Maximum current per output channel. Do not exceed total output power rating. 2. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 3. Power fail and power good signal for quad output models only and optional. 4. Specifications are for nominal input voltage, 25°C and max. load unless otherwise stated. 5. Derate output power linearly to 80% from 90 VAC to 80 VAC input. 2 Innovations in Power 4EM-17-002 39-DE60-47823-002 / B1 Mechanical Specifications AC Input Connector (J1) Molex: 26-60-4030 or equivalent Mating: 09-50-3031; Pins: 08-50-0106 EARTH Molex: 19705-4301 or equivalent Mating: 190030001 DC Output Connector (J2) Tyco: 1-640445-2 or equivalent Mating: 1-647402-2; Pins: 3-647409-1 Signal Connector (J3) Molex: 22-23-2021 or equivalent Mating: 22-01-2021 Dimensions 5.0 x 3.04 x 1.07 inches (127.0 x 77.22 x 27.18 mm) Weight 250 g EMC CE Mark Complies with LVD Directive Conducted Emissions EN55022-B, CISPR22-B, FCC PART15-B Static Discharge EN61000-4-2, Level-3 RF Field Susceptibility EN61000-4-3, Level-3 Fast Transients/Bursts EN61000-4-4, Level-3 Radiated Emissions EN55022-B, CISPR22-B, FCC PART15-B To be controlled in end system Surge Susceptibility EN61000-4-5, Level-3 Harmonic Current EN61000-3-2, Class A Safety Safety Standard(s) IEC60601-1 (ed.3), EN60601-1, UL60601-1 (1st Edition), CSA C22.2 No. 601.1 Approval Agency Nemko, UL, C-UL Safety File Number(s) Nemko: P12215289 UL: E173812 Signal 3 Power Fail Signal Signal goes low 1 ms advance before output goes out of regulation due to mains failure 51 4EM-17-002 39-DE60-47823-002 / B1 1 Total Output Power Rating Cooling Convection 150LFM, Vin < 100 V 150 LFM, Vin > 100 V Single Output 80 W 100 W 110 W Quad Output 75 W 100 W 110 W LFMVLT110-4304 70 W 98 W 98 W LFMVLT110-1300 62 W 92 W 92 W Derating Curve Mechanical Drawing Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following 1. Stand off, used to mount PCB has OD of 5.4 mm max. 2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3. Washer, if used, to have dia of 6.5 mm max. 4 Innovations in Power 4EM-17-002 39-DE60-47823-002 / B1