EOS LFMWLT200 SERIES 200 Watt Open Frame Power Supply 200 Watt Medical Measures: 5.00 x 3.00 x 1.50” Features l 5 x 3 x 1.5 inches form factor l 200 W with forced-air cooling l High efficiency > 88% l 12 V fan output l 5 V standby output l Remote sense l Output voltage adjustability Electrical Specifications Input Voltage 90-264 VAC/120-390 VDC, Universal Input Frequency 47-63 Hz Input Current 120 VAC: 2.4 A max. 230 VAC: 1.2 A max. No Load Power 0.8 W Inrush Current 120 VAC: 35 A max. 230 VAC: 65 A max. Leakage Current 120 VAC: < 150 µA 230 VAC: < 300 µA Efficiency 120 VAC: 84% typical 230 VAC: 86% typical Hold-up Time 120 VAC > 10 ms 230 VAC > 10 ms Power Factor 120 VAC: 0.99 230 VAC: 0.95 Output Power 160 to 200 W Peak Power 250 W for 0.2 s Line Regulation +/-0.5% Load Regulation +/-2.0% Transient Response < 10%, 50% to 100% load change, 50 Hz, 50% duty cycle, 0.1 A/µs, recovery time < 5 ms Rise Time < 100 ms Set Point Tolerance +/-1% Output Adjustability +/-3.0% Over Current Protection 110% typical above rating Over Voltage Protection 110 to 150% Short Circuit Protection Short term, autorecovery Switching Frequency PFC converter: Variable, 35-250 kHz; 90 kHz typical Resonant converter: Variable, 35-250 kHz; 90 kHz typical Operating Temperature -20 to +70°C, refer derating curve, -20 to 0°C, start-up is guaranteed Storage Temperature -40 to +85°C Relative Humidity 95% Rh, noncondensing Altitude Operating: 10,000 ft.; Nonoperating: 40,000 ft. MTBF 1.6m Hours, Telcordia -SR332-issue 3 Isolation Voltage Min. 5900 VDC between input to output Cooling Convection: 83 W; 300 LFM: 175 W (5 V model) Convection: 160 W; 300 LFM: 200 W (other models) 103 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/eos-LFMWLT200-power-supply.html h t t p: / / pow e r. sa ge r. c om 4EM-15-133 39-DE60-45550-002 / C EOS LFMWLT200 SERIES 200 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.50” 1 1 2 Model Number Voltage Max. Load Max. Load Min. Load Ripple Description (Convection) (300 LFM) LFMWLT200-1000 Class 1 with Screw Terminal 35.0 A LFMWLT200-1000-2 Class 2 with Screw Terminal 5 V 16.67 A 0.0 A 1% LFMWLT200-1300 Class 1 with JST Connector 26.0 A LFMWLT200-1300-2 Class 2 with JST Connector LFMWLT200-1001 Class 1 with Screw Terminal LFMWLT200-1001-2 Class 2 with Screw Terminal 12 V 13.33 A 16.67 A 0.0 A 1% LFMWLT200-1301 Class 1 with JST Connector LFMWLT200-1301-2 Class 2 with JST Connector LFMWLT200-1002 Class 1 with Screw Terminal LFMWLT200-1002-2 Class 2 with Screw Terminal 15 V 10.67 A 13.33 A 0.0 A 1% LFMWLT200-1302 Class 1 with JST Connector LFMWLT200-1302-2 Class 2 with JST Connector LFMWLT200-1003 Class 1 with Screw Terminal LFMWLT200-1003-2 Class 2 with Screw Terminal 24 V 6.67 A 8.33 A 0.0 A 1% LFMWLT200-1303 Class 1 with ST Connector LFMWLT200-1303-2 Class 2 with JST Connector LFMWLT200-1004 Class 1 with Screw Terminal LFMWLT200-1004-2 Class 2 with Screw Terminal 48 V 3.33 A 4.17 A 0.0 A 1% LFMWLT200-1304 Class 1 with JST Connector LFMWLT200-1304-2 Class 2 with JST Connector LFMWLT200-1005 Class 1 with Screw Terminal LFMWLT200-1005-2 Class 2 with Screw Terminal 30 V 5.33 A 6.67 A 0.0 A 1% LFMWLT200-1305 Class 1 with JST Connector LFMWLT200-1305-2 Class 2 with JST Connector LFWLT200-CK metal cover kit accessory Notes 1. Combined output power from V1, VSTBY and VFAN should not exceed the total output power rating. 2. Ripple is 2% up to 20% load and < 1% above 20% load. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 3. Fan output voltage tolerance is +/-20%. During V1 full load, VFAN needs min. 20 mA load to be within regulation band. 4. Peak current for fan output is 1 A. 5. Class 1 products have an Earthing tab and Class 2 products (-2 suffix) have no Earthing tab. 6. Specifications are for nominal input voltage, 25°C and max. load unless otherwise stated. 7. PSU is supplied with J3 housing, pin-4 and pin-6 shorted to enable main output without remote on/off feature. 8. Derate output power linearly to 80% from 90 VAC to 80 VAC input. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/eos-LFMWLT200-power-supply.html 2 h t t p: / / pow e r. sa ge r. c om Innovations in Power 4EM-15-133 39-DE60-45550-002 / C EOS LFMWLT200 SERIES 200 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.50” Connectors Connectors J1 Pin 1 AC NEUTRAL J3 Pin 1 +VE REMOTE SENSE Pin 2 AC LINE Pin 2 VFAN (12 V/0.5 A) Spade Connector (J4) EARTH Pin 3 -VE REMOTE SENSE (Class 1 product only) Pin 4 REMOTE ON/OFF J2 Pin 1, 2, 3 RTN Pin 5 VSTBY (5 V/1 A, +/-5%) Pin 4, 5, 6 V1 Pin 6 RTN Pin 7 POWER FAIL Pin 8 POWER GOOD Mechanical Specifications AC Input Connector (J1) Molex: 26-60-4030 or equivalent Mating: 09-50-3031; Pins: 08-50-0106 EARTH (J4) Molex: 19705-4301 or equivalent; Mating: 190030001 DC Output Connector (J2) Option 1: Tyco: 2-1776112-3 or equivalent Mating: 13 AWG wire Option 2: JST: B6P-VH-B (LF) (SN) or B6P-VH (LF) (SN) or equivalent Mating: VHR-6M; Pins: SVH-41T-P1.1 Signal Connector (J3) Molex: 22-23-2081 or equivalent Mating: 22-01-2087, Pins: 08-50-0113 Dimensions 5.0 x 3.0 x 1.5 inches (127.0 x 76.2 x 38.1 mm) Weight 325 g EMC CE Mark Complies with LVD Directive Conducted Emissions EN55022-B, CISPR22-B, FCC PART15 Class B, EN60601-1-2 Static Discharge EN61000-4-2, Level-3 RF Field Susceptibility EN61000-4-3, Level-3 Fast Transients/Bursts EN61000-4-4, Level-3 Radiated Emissions EN55022-B, CISPR22-B, FCC PART15-B, to be controlled in end system Surge Susceptibility EN61000-4-5, Level-3 Harmonic Current EN61000-3-2, Class D Safety Safety Standard(s) EN60601-1, IEC60601-1 (ed.3), ANSI / AAMI ES 60601 - 1, CSA C22.2 No. 60601-1 Approval Agency Nemko, UL, C-UL Safety File Number(s) Nemko: P11213837/38; UL: E173812 Signal Power Good Signal TTL signal goes high after main output is within regulation band, delay is 0.1 to 0.3 s Power Fail Signal TTL signal goes low 1ms advance before output goes out of regulation due to mains failure Remote Sense Compensates for 200 mV drop Remote on/off To turn on PSU short remote pin to ground 105 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/eos-LFMWLT200-power-supply.html h t t p: / / pow e r. sa ge r. c om 4EM-15-133 39-DE60-45550-002 / C EOS LFMWLT200 SERIES 200 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.50” Derating Curve Ambient Temperature (°C) Ambient Temperature (°C) Mechanical Drawing 5.000 [127.00] 0.120 [3.0] MAX 4.550 [115.57] 0.225 [5.72] COMPONENT HEIGHT BELOW PCB J4 J2-1 N J1-1 L COMPONENT ENVELOP J3-1 1.318 [33.5]MAX MOUNTING HOLES MOUNTING HARDWARE TOP COMPONENT HT Ø0.160[Ø4.06] 4-PLS AND BOTTOM CLEARANCE ABOVE PCB Ø 0.312[Ø7.9] 4-PLS 1.500 [38.1] MECHANICAL OUTLINE DIMENSIONS ALL DIMENSIONS ARE IN INCHES [MM] GEN. TOLERANCE: +/-0.02 [+/-0.5] Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/eos-LFMWLT200-power-supply.html h t t p: / / pow e r. sa ge r. c om Innovations in Power 4EM-15-133 39-DE60-45550-002 / C DIRECTION OF AIRFLOW Output Power (W) 3.000 [76.20] 2.550 [64.77] 0.225 [5.72] Output Power (W)