EOS LFWLT150 SERIES 150 Watt Open Frame Power Supply 150 Watt Industrial (WLT) Measures: 4.00 x 2.00 x 1.32” Features • 4.0 x 2.0 x 1.324 inches form factor • 150 W with air forced cooling • Class 1 & 2 products • 12 V @ 0.5 A fan voltage auxiliary output • High efficiency > 86% • Low conducted and radiated noise • Light weight • Cover kit accessory available Electrical Specifications Input Voltage 90-264 VAC/120-390 VDC, Universal Input Frequency 47-63 Hz Input Current 120 VAC: 1.7 A max. 230 VAC: 0.85 A max. Inrush Current 120 VAC: 35 A max. 230 VAC: 65 A max. Leakage Current 120 VAC: < 150 µA 230 VAC: < 300 µA Efficiency 120 VAC: 84% typical 230 VAC: 86% typical Hold-up Time 120 VAC: 6 ms 230 VAC: 10 ms Power Factor 120 VAC: 0.99 230 VAC: 0.95 Output Power 150 W Peak Power 170 W for 0.2 s Line regulation +/-0.5% Load regulation +/-2.0% Transient response < 10%, 50% to 100% load change, 50 Hz, 50% duty cycle, 0.1 A/µs, recovery time < 5 ms rise Time < 100 ms Set Point Accuracy (Main Output) +/-1% Output Adjustability +/-3.0% Over Current Protection 110% typical above rating Over Voltage Protection 110 to 150% Short Circuit Protection Short term, auto recovery Switching Frequency PFC converter: Variable, 35-250 kHz; 90 kHz typical resonant converter: Variable, 35-250 kHz; 90 kHz typical Operating Temperature -20 to +70°C, refer derating curve -20 to 0°C, start-up is guaranteed Storage Temperature -40 to +70°C relative Humidity 95% rh, non condensing Altitude Operating: 10,000 ft.; Non-operating: 40,000 ft. MTBF > 200 kh, Bellcore Tr332 Isolation Voltage Min. 4242 VDC between input to output Cooling Convection: 80 W; 300 LFM: 100 W (5 V model) Convection: 100 W; 300 LFM: 150 W (Other model) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 35 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/eos-LFWLT150-power-supply.html h t t p: / / pow e r. sa ge r. c om EOS LFWLT150 SERIES 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.32” 1 1 2 Model Number Description Voltage Max. Load Max. Load Min. Load ripple (Convection) (300 LFM) LFWLT150-1000 Class 1 with Screw Terminal 20.0 A LFWLT150-1000-2 Class 2 with Screw Terminal 5 V 16.0 A 0.0 A 1% LFWLT150-1300 Class 1 with JST Connector 16.0 A LFWLT150-1300-2 Class 2 with JST Connector LFWLT150-1001 Class 1 with Screw Terminal LFWLT150-1001-2 Class 2 with Screw Terminal 12 V 8.33 A 12.5 A 0.0 A 1% LFWLT150-1301 Class 1 with JST Connector LFWLT150-1301-2 Class 2 with JST Connector LFWLT150-1002 Class 1 with Screw Terminal LFWLT150-1002-2 Class 2 with Screw Terminal 15 V 6.67 A 10.0 A 0.0 A 1% LFWLT150-1302 Class 1 with JST Connector LFWLT150-1302-2 Class 2 with JST Connector LFWLT150-1003 Class 1 with Screw Terminal LFWLT150-1003-2 Class 2 with Screw Terminal 24 V 4.17 A 6.25 A 0.0 A 1% LFWLT150-1303 Class 1 with JST Connector LFWLT150-1303-2 Class 2 with JST Connector LFWLT150-1004 Class 1 with Screw Terminal LFWLT150-1004-2 Class 2 with Screw Terminal 48 V 2.08 A 3.13 A 0.0 A 1% LFWLT150-1304 Class 1 with JST Connector LFWLT150-1304-2 Class 2 with JST Connector LFWLT100-CK metal cover kit accessory Notes 1. Combined output power from V1 and VFAn should not exceed the total output power rating. 2. ripple is 2% up to 20% load and < 1% above 20% load. ripple is peak to peak with 20 MHz bandwidth and 10 µF (Tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 3. Fan output voltage tolerance is +/-20%. 4. Peak current for fan output is 1 A. 5. Class 1 products have an Earthing tab and class 2 products (-2 suffix) have no Earthing tab. 6. Specifications are for nominal input voltage, 25°C and max. load unless otherwise stated. 7. Derate output power linearly to 80% from 90 VAC to 80 VAC input. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/eos-LFWLT150-power-supply.html h t t p: / / pow e r. sa ge r. c om 36 Innovations in Power EOS LFWLT150 SERIES 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.32” Connectors J1 Pin 1 AC LInE Pin 2 AC nEuTrAL Spade Connector EArTH (Class 1 product only) J2 Pin 1, 2 V1 Pin 3, 4 rTn J3 Pin 1 VFAn (+12 V/0.5 A) Pin 2 rTn Mechanical Specifications AC Input Connector (J1) Molex: 26-60-4030 or equivalent; Mating: 09-50-3031; Pins: 08-50-0106 EArTH Molex: 19705-4301 or equivalent Mating: 190030001 DC Output Connector (J2) Option 1: Tyco: 1776112-4 or equivalent Mating: 13 AWG wire Option 2: JST: B4P-VH-B (LF) (Sn) or B4P-VH (LF) (Sn) or equivalent Mating: VHr-4M; Pins: SVH-41T-P1.1 Fan Connector (J3) Tyco: 640456-2 or equivalent Mating: 640440-2 Dimensions 4.0 x 2.0 x 1.324 inches (101.6 x 50.8 x 33.63 mm) Weight 150 g EMC CE Mark Complies with LVD Directive Conducted Emissions En55022-B, CISPr22-B, FCC PArT15 CLASS-B, En50082-1 Static Discharge En61000-4-2, Level-3 rF Field Susceptibility En61000-4-3, Level-3 Fast Transients/Bursts En61000-4-4, Level-3 radiated Emissions En55022-B, CISPr22-B, FCC PArT15-B To be controlled in end system Surge Susceptibility En61000-4-5, Level-3 Harmonic Current En61000-3-2, Class D Safety Safety Standard(s) uL/CSA C22.2 no./IEC/En60950-1 (2nd Edition) Approval Agency Nemko, UL, C-uL, IEC Safety File number(s) nemko: P09210704 uL: E150565 37 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/eos-LFWLT150-power-supply.html h t t p: / / pow e r. sa ge r. c om EOS LFWLT150 SERIES 150 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.32” Derating Curve Ambient Temperature (°C) Ambient Temperature (°C) Mechanical Drawing 300 LFM direction of Air Flow 4.000 [101.60] 0.100 [2.54] MAX 3.750 [95.25] COMPONENT HEIGHT BELOW PCB J3-1 J2-1 COMPONENT N ENVELOP J1-1 L J4 1.161 [29.5]MAX CLEARANCE TOP/BOTTOM MOUNTING HOLE COMPONENT ∅0.312 [∅7.9] 4-PLS ∅0.16 [∅4.0] 4-PLS HEIGHT ABOVE PCB 1.324 [33.64]MAX MECHANICAL OUTLINE DIMENSIONS ALL DIMENSIONS ARE IN INCHES [MM] GEN. TOLERANCE: +/-0.02 [+/-0.5] Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. 38 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/eos-LFWLT150-power-supply.html h t t p: / / pow e r. sa ge r. c om Innovations in Power Output Power (W) Output Power (W) 1.750 [44.44] 2.000 [50.80]