Manufacturers
ERNI ELECTRONICS 214785
Description
Conn Power Tap PIN 10 POS 2.54mm Solder ST Thru-Hole 10 Terminal 1 Port
214785
Part Number
214785
Price
Request Quote
Manufacturer
ERNI ELECTRONICS
Lead Time
Request Quote
Category
Connectors » Connector Power
Specifications
Manufacturer
ERNI Electronics
Manufacturers Part #
214785
Sub-Category
Power Connectors
Factory Pack Quantity
300
Datasheet
Extracted Text
2.54 mm Power Taps for Backplanes www.erni.com Catalog E 074490 04/06 Edition 2 www.erni.com 2 Catalog E 074490 Catalog E 074490 04/06 04/06 Edition 2 Edition 2 www.erni.com 2.54 mm Power Taps for Backplanes Table of Contents Electrical and Mechanical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 6 pin with Screw Mount Terminal, Solder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 10 pin with Screw Mount Terminal, Solder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 6 pin with Screw Mount Terminal, Pressfit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 10 pin with Screw Mount Terminal, Pressfit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 10 pin with Screw Mount and angled Slip-on Terminals, Pressfit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Press-In-Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Catalog E 074490 04/06 Edition 2 www.erni.com 1 2.54 mm Power Taps for Backplanes Electrical and Mechanical Characteristics Standard 6 pin Version 10 pin Version Number of Pins 6 10 Technical data Climate Category DIN EN 60068-1 -55/125/56 -55/125/56 test b Bearing and operating -55/125 °C -55/125 °C temperature area Current rating IEC60512 by ambient temperature: by ambient temperature: test 5b 20°C 40 A 20°C 40 A 70°C 24 A 70°C 24 A 100°C 8 A 100°C 8 A The operatig current is determi- The operatig current is determi- ned by characteristics of the ned by characteristics of the PCB and the cable termination. PCB and the cable termination. Process-conditions Solder temperature max. IEC 68-2-20 Hand soldering 3.5 s at 350 °C 3.5 s at 350 °C temperature max. Dip soldering 10 s at 260 °C 10 s at 260 °C temperature max. Warning Soldering of pressfit connectors Soldering of pressfit connectors not to be recommended. not to be recommended. Contact and mating area Base material Cu alloy Cu alloy Plating Sn Sn Transfer area Base material Cu alloy Cu alloy Plating Sn Sn Environment compatibility Recycling Easy recycling Easy recycling Assembly information Max. tightening torque M3 0.5 Nm 0.5 Nm Max. tightening torque M4 1.2 Nm 1.2 Nm Max. tightening torque 0.5 Nm 0.5 Nm 6-32 UNC Max. tightening torque 1.2 Nm 1.2 Nm 8-32 UNC For assembly scheme For assembly scheme see page 14. see page 14. 2 Catalog E 074490 04/06 Edition 2 www.erni.com 2.54 mm Power Taps for Backplanes 6 pin with Screw Mount Terminal, Solder The ERNI Power Tap is designed to bring power to printed circuit board applications. It allows for wire-to-board connections with common terminals. The 6 pin version has three solder pins per row with a two-row PCB layout. The operating current is determined by characteristics of the PCB and the cable termination. This power supply cable can be connected with a screw mount terminal accomodating M3, M4, 6-32UNC or 8-32UNC screws. Dimensional Drawings 7,62 () 1,96 Leiterplatten Oberkante 2,54 2 x 2,54 = 5,08 9 Leiterplattenbohrbild PCB drillhole pattern 2 x 2.54 =5,08 2,54 0,7 0,7 Dieser Bereich muß gleiches Potential auf LP-Oberfläche haben This area must have same electrical potential on surface of PCB 1 0,1 ø0.05 All dimensions in mm ( alle Löcher/ ) all holes Catalog E 074490 04/06 Edition 2 www.erni.com 3 10 7,62 8,64 5,2 6,1 1,4 2.54 mm Power Taps for Backplanes 6 pin with Screw Mount Terminal, Solder Ordering Information Configuration Termination No. of Pins Height Part Number 6 pin Version; M3 Solder 6 10 mm 214801 6 pin Version; M4 Solder 6 10 mm 214788 6 pin Version; 6-32UNC Solder 6 10 mm 214802 6 pin Version; 8-32UNC Solder 6 10 mm 214803 4 Catalog E 074490 04/06 Edition 2 www.erni.com 2.54 mm Power Taps for Backplanes 10 pin with Screw Mount Terminal, Solder The ERNI Power Tap is designed to bring power to printed circuit board applications. It allows for wire-to-board connections with common terminals. The 10 pin version has five solder pins per row with a two-row PCB layout. The operating current is determined by characteristics of the PCB and the cable termination. This power supply cable can be connected with a screw mount terminal accomodating M3, M4, 6-32UNC or 8-32UNC screws. Dimensional Drawings 2,54 7,62 4 x 2,54 = 10,16 Leiterplatten Oberkante () 0,92 12 Leiterplattenbohrbild PCB drillhole pattern 0,7 0,7 4 x 2.54 = 10,16 2,54 Dieser Bereich muß gleiches Potential auf LP-Oberfläche haben This area must have same electrical potential on surface of PCB 0,1 1 ø0.05 ( alle Löcher/ ) all holes All dimensions in mm Catalog E 074490 04/06 Edition 2 www.erni.com 5 7,62 10 8,64 5,2 6,1 1,4 2.54 mm Power Taps for Backplanes 10 pin with Screw Mount Terminal, Solder Ordering Information Configuration Termination No. of Pins Height Part Number 10 pin Version; M3 Solder 10 10 mm 214785 10 pin Version; M4 Solder 10 10 mm 214786 10 pin Version; 6-32UNC Solder 10 10 mm 214784 10 pin Version; 8-32UNC Solder 10 10 mm 214783 6 Catalog E 074490 04/06 Edition 2 www.erni.com 2.54 mm Power Taps for Backplanes 6 pin with Screw Mount Terminal, Pressfit The ERNI Power Tap is designed to bring power to printed circuit board applications. It allows for wire-to-board connections with common terminals. The 6 pin version has three pressfit pins per row with a two-row PCB layout. The operating current is determined by characteristics of the PCB and the cable termination. This power supply cable can be connected with a screw mount terminal accomodating M3, M4, 6-32UNC or 8-32UNC screws. Dimensional Drawings () () 1,96 1,96 Leiterplatten Oberkante Leiterplatten Oberkante 7,62 7,62 2,54 2,54 2 x 2,54 = 5,08 9 9 Leiterplattenbohrbild + 0,09 PCB drillhole pattern 1) ø 1,0 Durchmesser des metallisierten Loches - 0,06 + 0,09 2 x 2.54 = 5,08 ø 1,0 Diameter of finished plated-through hole - 0,06 2,54 ± 0,025 ø 1,15 Bohrungsdurchmesser des Loches ± 0,025 0,7 0,7 ø 1,15 Diameter of drilled hole Dieser Bereich muß gleiches Potential auf LP-Oberfläche haben This area must have same electrical potential on surface of PCB 1) ø0.05 ( alle Löcher/ ) all holes All dimensions in mm Catalog E 074490 04/06 Edition 2 www.erni.com 7 9,1 9,1 7,62 8,64 8,64 5,2 5,2 6,1 6,1 1,4 2.54 mm Power Taps for Backplanes 6 pin with Screw Mount Terminal, Pressfit Ordering Information Configuration Termination No. of Pins Height Part Number 6 pin Version; M3 Pressfit 6 9.1 mm 214796 6 pin Version; M4 Pressfit 6 9.1 mm 214787 6 pin Version; 6-32UNC Pressfit 6 9.1 mm 214797 6 pin Version; 8-32UNC Pressfit 6 9.1 mm 214798 8 Catalog E 074490 04/06 Edition 2 www.erni.com 2.54 mm Power Taps for Backplanes 10 pin with Screw Mount Terminal, Pressfit The ERNI Power Tap is designed to bring power to printed circuit board applications. It allows for wire-to-board connections with common terminals. The 10 pin version has five pressfit pins per row with a two-row PCB layout. The operating current is determined by characteristics of the PCB and the cable termination. This power supply cable can be connected with a screw mount terminal accomodating M3, M4, 6-32UNC or 8-32UNC screws. Dimensional Drawings 2,54 7,62 4 x 2,54 = 10,16 () 0,92 Leiterplatten Oberkante 12 Leiterplattenbohrbild PCB drillhole pattern + 0,09 1) ø 1,0 Durchmesser des metallisierten Loches - 0,06 + 0,09 0,7 0,7 4 x 2.54 = 10,16 ø 1,0 Diameter of finished plated-through hole - 0,06 2,54 ± 0,025 ø 1,15 Bohrungsdurchmesser des Loches ± 0,025 ø 1,15 Diameter of drilled hole Dieser Bereich muß gleiches Potential auf LP-Oberfläche haben This area must have same electrical potential on surface of PCB 1) ø0.05 ( alle Löcher/ ) all holes All dimensions in mm Catalog E 074490 04/06 Edition 2 www.erni.com 9 9,1 7,62 8,64 5,2 6,1 1,4 2.54 mm Power Taps for Backplanes 10 pin with Screw Mount Terminal, Pressfit Ordering Information Configuration Termination No. of Pins Height Part Number 10 pin Version; M3 Pressfit 10 9.1 mm 214781 10 pin Version; M4 Pressfit 10 9.1 mm 214782 10 pin Version; 6-32UNC Pressfit 10 9.1 mm 214780 10 pin Version; 8-32UNC Pressfit 10 9.1 mm 214779 10 Catalog E 074490 04/06 Edition 2 www.erni.com 2.54 mm Power Taps for Backplanes 10 pin with Screw Mount and angled Slip-on Terminals, Pressfit The ERNI Power Tap is designed to bring power to printed circuit board applications. It allows for wire-to-board connections with common terminals. The 10 pin version has five pressfit pins per row with a two-row PCB layout. The operating current is determined by characteristics of the PCB and the cable termination. This power supply cable can be connected through either slip-on pluggable terminals or a screw mount terminal. The slip-on terminal is designed for two terminal sizes: 6.3 x 0.8 mm or 2.8 x 0.8 mm, per DIN 46244. The screw mount terminal accomodates an M4 screw. Dimensional Drawings 6,3 90° angled Slip-on Faston termination 12,7 2,8 Flachsteckeranschluss entsprechend DIN 46244/Teil 2 accoding to DIN46244/part 2 2,54 7,62 4 x 2.54 = 10,16 () 0,92 Leiterplatten Oberkante 12 Leiterplattenbohrbild PCB drillhole pattern + 0,09 0,7 0,7 4 x 2.54 = 10,16 1) ø 1,0 Durchmesser des metallisierten Loches - 0,06 + 0,09 2,54 ø 1,0 Diameter of finished plated-thr - 0,06 ough hole ø 1,15 Bohrungsdur ± 0,025 chmesser des Loches ± 0,025 ø 1,15 Diameter of drilled hole Dieser Bereich muß gleiches Potential auf LP-Oberfläche haben This area must have same electrical potential on surface of PCB All dimensions in mm 1) ø0.05 ( alle Löcher/ ) all holes Catalog E 074490 04/06 Edition 2 www.erni.com 11 18,5 10 7,62 8,2 5,5 1,5 6,2 1,4 2.54 mm Power Taps for Backplanes 10 pin with Screw Mount and angled Slip-on Terminals, Pressfit Dimensional Drawings 45° angled Slip-on () 24,8 6,3 Faston termination Flachsteckeranschluss 2,8 entsprechend DIN 46244/Teil 2 according to DIN 46244/part 2 2,54 7,62 Leiterplatten Oberkante 4 x 2.54 = 10,16 () 0,92 12 Leiterplattenbohrbild PCB drillhole pattern + 0,09 0,7 0,7 4 x 2.54 = 10,16 1) ø 1,0 Durchmesser des metallisierten Loches - 0,06 + 0,09 2,54 ø 1,0 Diameter of finished plated-through hole - 0,06 ± 0,025 ø 1,15 Bohrungsdurchmesser des Loches ø 1,15 Diameter of drilled hole ± 0,025 Dieser Bereich muß gleiches Potential auf LP-Oberfläche haben This area must have same electrical potential on surface of PCB 1) All dimensions in mm ø0.05 ( alle Löcher/ ) all holes 12 Catalog E 074490 04/06 Edition 2 www.erni.com 45˚ 8,2 () 15,9 10 5,5 7,62 1,5 6,2 1,4 2.54 mm Power Taps for Backplanes 10 pin with Screw Mount and angled Slip-on Terminals, Pressfit Ordering Information Configuration Termination No. of Pins Height Part Number 10 pin Version; without nut / Pressfit 10 18.5 mm 134989 90° angled Slip-on 10 pin Version; Pressfit 10 18.5 mm 134990 M4 / 90° angled Slip-on 10 pin Version; Pressfit 10 15.9 mm 134999 M4 / 45° angled Slip-on Catalog E 074490 04/06 Edition 2 www.erni.com 13 2.54 mm Power Taps for Backplanes Accessories Assembly Scheme 022636-Zylinderschraube ISO 1207 - M4x6 - 4.8 cheese head screw 001765-Scheibe DIN 125 A 4,3 washer Kabelschuh cable eye 033412 Zahnscheibe DIN6797 4.3 Form A ratchet wheel Ordering Information Description Part Number Cheese head screw M4x6 - 4.8 ISO 1207 022636 Washer A 4.3 DIN 125 001765 Star Washer A 4,3 DIN 6797 033412 Press-In-Tooling Ordering Information Description Comment Part Number Upper Tool With Quick Change 471870 Lower Tool With Quick Change 220140 14 Catalog E 074490 04/06 Edition 2 www.erni.com 2,3 0,3 6 2.54 mm Power Taps for Backplanes Part Number Index Part Number Page 001765 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 022636 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 033412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 134989 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 134990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 134999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 214779 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 214780 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 214781 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 214782 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 214783 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 214784 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 214785 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 214786 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 214787 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 214788 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 214796 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 214797 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 214798 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 214801 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 214802 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 214803 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 220140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 471870 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Catalog E 074490 04/06 Edition 2 www.erni.com 15 2.54 mm Power Taps for Backplanes Notes 16 Catalog E 074490 04/06 Edition 2 www.erni.com Member www.erni.com Catalog E 074441 Catalog E 074490 11/03 04/06 Edition 4 Edition 2 www.erni.com 17 ERNI Electronics GmbH Europe South America Africa Seestrasse 9 73099 Adelberg, Deutschland Tel +49 7166 50-0 Fax +49 7166 50-282 info@erni.de ERNI Electronics, Inc. North America Canada Mexico 2201 Westwood Ave Richmond, VA 23230 Tel +1 804 228-4100 Fax +1 804 228-4099 info.usa@erni.com ERNI Asia Holding Pte Ltd. Asia Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 info@erni-asia.com www.erni.com ERNI Electronics GmbH 2006 • Printed in Germany. A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. 1 18 8 Catalog E 074490 Catalog E 074441 Catalog E 074490 04/06 11/03 04/06 Edition 2 Edition 4 Edition 2 www www.er .erni.com ni.com
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 214785?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Conn Power M 10 POS 2.54mm Press Fit ST Thru-Hole 10 Terminal 1 Port 024660
Conn Power 10 POS 2.54mm Press Fit ST Thru-Hole 10 Terminal 1 Port 114192
Conn Power 10 POS 2.54mm Press Fit ST Thru-Hole 10 Terminal 1 Port 114193
Conn Power 10 POS 2.54mm Press Fit ST Thru-Hole 10 Terminal 1 Port 114194
Conn Power M 12 POS 2mm Press Fit RA Thru-Hole 12 Terminal 1 Port 114401
Conn Power M 12 POS 2mm Press Fit RA Thru-Hole 12 Terminal 1 Port 114402
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods