AdvancedTCA Connectors acc. to PICMG 3.0 ERNI is anxious to support customers extensively and is gra- Key features of the AdvancedTCA platform are: dually completing the product range for interconnect plat- • Scalability forms. This also includes the ATCA (Advanced Telecom Com- • Higher data bandwidth puting Architecture) standard. This standard (also known as • High level of modularity, and configurability and remote PICMG 3.0) is one of the latest standards addressing future maintainability telecommunication needs. ERNI can supply both power and • Advanced system management signal connectors. • Improved reliability The AdvancedTCA specifications, beginning with the core specification PICMG 3.0, are aimed at further expanding the market for off-the shelf solutions for AdvancedTCA is a trademark of PICMG. high speed communication equipment. Supplementary to the Generic PICMG 3.0 spec. the AdvancedTCA family of specifications are PICMG 3.1 for Ethernet Fabric, PICMG 3.2 for InfiniBand and PICMG 3.3 for StarFabric. The PICMG 3.x specification familiy defines a single connector family for the data transfer. The electrical interconnect has to support high speed differential sig- naling. Key requirements are the support of various signal rates, telco-specific mechanical constraints, reliability, manufacturability, cost and availability. 1 www.erni.com Catalog E XXXXXX 01/07 Edition 3 Zone 2 Signal Connectors PICMG selected the ERNI ERmet ZD connector For secure and correct mating of the daughtercards (second sourced by Tyco) for use as the high speed ERNI provides solid alignment modules. connector within the Data Transport Connector zone (Zone 2) with up to 5 ERmet ZD connectors. The Data Transports zone supports four different inter- faces: • Base Interface (64 signal pairs) • Fabric Interface (120 signal pairs) • Telephony Synchronization Clock Interface (6 signal pairs) • Update Port Interface (10 signal pairs) Ordering Information Configuration PCB Position Number of Pairs Partnumber Backplane Connector Module 4pair P20, P21, P22, P23, P24 40 signals / 40 grounds 973031 Daughtercard Connector Module 4pair J20, J21, J22, J23, J24 40 signals / 40 grounds 973032 2 www.erni.com Catalog E XXXXXX 01/07 Edition 3 ab cd ef gh gh ef cd ab gh ef cd ab Backplane Connector Zone 2 Dimensional Drawing 23,4 -0,1 Id.-Nr. Date Code EE-Zone für durchkontaktierte Löcher ş 0.6 ±0.05 compliant zone for through hole ş 0.6 ±0.05 10 9 8 7 6 5 4 3 2 1 a b c d e f g h 2,5 9x2.5= 22,5 0,75 24,95 -0,1 General Layout Information Additional GND-holes for improved RF-characteristics in pair a-b ab cd ef gh ERmet ZD 10 1 ERmet ZD 10 1 ERmet ZD ab cd ef gh 1,5 16,5 Tracks are only an example For further layout information please refer to PICMG Specifications. 3 www.erni.com Catalog E XXXXXX 01/07 Edition 3 22,5 2,5 2,5 2,5 1,5 4,5 5,7 0,2 () 1,7 3 -0,1 0,15 1,15 (45 mil) 0,25 (10 mil) 6,35 0,1 depends from manufacturer 0,3 (12 mil) 0,65 (25 mil) and size of the Backplane 13,4 0,05 0,7 Drill (27.5 mil) finished hole = ş0.6mm ±0.05 (23 mil) XXXXXXX ERNI 973031 gh ef cd ab ab cd ab ef cd gh ef gh Daughtercard Connector Zone 2 Dimensional Drawing 9x2.5= 22,5 0,75 2,5 h g f e d c b a 10 1 EE-Zone für durchkontaktierte ±0.05 Löcher ş 0.6 compliant zone for through hole ±0.05 ş 0.6 0,1 15,7 1,8 24,95 -0,1 2,4 0,1 h g f e d c b a 21,4 -0,1 Firmensignet Position Id.-Nr. Date Code General Layout Information Additional GND-holes for improved RF-characteristics in pair a-b 22,5 2,5 2,5 2,5 ERmet ZD ERmet ZD ERmet ZD 10110 1 a a b b c c d d e e f f g g h h 1,05 (41 mil) depends from manufacturer 0,3 (12 mil) and board size track difference = 1.6 mm 0,5 (20 mil) Tracks are only an example. 0,15 (6 mil) 0,7 Drill (27.5 mil) finished hole = ş0.6 mm ± 0.05 0,25 (10 mil) (23 mil) For further layout information please refer to PICMG Specifications. 4 www.erni.com Catalog E XXXXXX 01/07 Edition 3 16,5 4,5 1,5 1,5 1 1,5 1,5 4,5 10,8 -0,2 1,5 19,4 0,1 1 27,9 1 XXXXXXX ERNI 973032 Zone 1 Power Connector According to PICMG 3.0 the AdvancedTCA Power Connector is Features qualified for use in Zone 1. The connector consists of 8 size 16 • In accordance with the PICMG 3.0 standard contacts along with 22 size 22 contacts. The insulation body has • Gold over nickel plating in contact area, tin plating on pcb an integrated guiding feature. The contact terminals provide terminals. compliant pressfit zones for easy assembly to the PCB. The • Controlled plating thickness at female mating point reliability of the pressfit technology has been proven many times • RoHS compliant in long term field experiences. The pressfit zones are flat-rock • Stamped female contacts with high conductive material for compatible, there is no need for special press-in tools. The highest current carrying capacity excellent design fully avoids any risk of damaging the connector • Improved normal contact force and relaxation compared to during the press-in process. machined contacts The use of high conductivity copper alloy allows high current • Reliable and proven pressfit zone carrying capability. The power contacts are capable of carrying • Standard flat rock press-in tools 16A and each signal contact is capable of carrying 2A. The • No additional pcb retention hardware required female contacts’ „lead in“ design combined with cavity protec- • Female contacts fully protected through proven lead-in tion prevent the contacts from being damaged. design Contacts which were plated subsequently do not have any bare • Positions 1, 2, 3 and 4 are not loaded ends and therefore are suitable for long term usage in critical • For specific applications partial contact loading is possible environments. A mounting screw (customer supplied) may be used, but is not necessarily required. The connector meets all PICMG 3.0 performance requirements and is fully intermateable with alternative connectors which were designed according to PICMG 3.0 Partnumber: ZP-A-030F-P1-2B the same standard. ERNI Partnumber: 214077 5 www.erni.com Catalog E XXXXXX 01/07 Edition 3 Electrical and Mechanical Characteristics for Zone 1 Power Connector Technical data Temperature range -55/125°C Current rating Pos. 5-24, 27, 32 2 A Pos. 25, 26, 28-31, 33, 34 16 A Clearance and creepage Pos. 5-16 min. 0.7 mm distance Pos. 17-24 min. 2.5 mm Pos. 25-26 min. 5.5 mm Pos. 27-34 min. 1.4 mm Pos. 13-16 to 17-20 min. 3.0 mm Pos. 21-24 to 25, 26 min. 4.0 mm Pos. 25, 26 to 27-29 min. 2.0 mm Voltage rating Has to be determined according to client-specific using case (degree of environmental pollution) according to IEC 60664. Dielectric strength Pos. 1-16 1000 V rms Pos. 17-24 2000 V rms Pos. 25-34 2000 V rms Contact resistance < 20 mΩ 4 Insulation resistance > 10 MΩ Materials Housing: PA 46 GF 30 Plastic material (symbol) CTI value CTI 225 UL flame rating UL 94 V-0 UL file (plastic material) E47960 Contact and mating area Base Material Cu alloy Plating 0.8 µm Au over 2-3 µm Ni Termination area Base Material Cu alloy Plating 0.5-2 µm Sn matt over 2-3 µm Ni Environment compatibility Recycling no flame-retardent additives, no toxic additives allow easy recycling 6 www.erni.com Catalog E XXXXXX 01/07 Edition 3 Power Connector Zone 1 Dimensional Drawing 28,6 max. 17,5 max. Bestückungsplan / contact assembly Datum tray packaging Verpackt in Tray packaging unit 32 pcs Verpackungseinheit: 32 St. XXXXXX ERNI 214077 342,5 269,5 ZP - A - 030F - P1 - 2B 38,5 PCB Layout +0,09 1) 1 (22x) -0,06 Schichtaufbau im metallisierten Loch ş 1 siehe Zeichnung 164062 Nr. 6 oder 114124 2x alle Löcher 0.05 diameter of drilled hole ş 1 see drawing 164062 no. 6 or 114124 0.05 22,55 6 Schichtaufbau im metallisierten Loch ş 1,6 siehe Zeichnung 164062 Nr. 10 oder 114407 +0,09 diameter of drilled hole ş 1,6 see drawing 164062 no. 10 or 114407 2) 1,6 (8x) -0,06 0.05 alle Löcher +0.09 1) ş 1,0 Durchmesser des metallisierten Loches -0,06 +0.09 17 5 13 21 ş 1,0 diameter of finished plated-through hole -0,06 25 28 30 33 +0.09 2) ş 1,6 Durchmesser des metallisierten Loches -0.06 32 +0.09 ş 1,6 diameter of finished plated-through hole -0.06 / missing information see PICMG 3.0 26 29 31 34 Fehlende Angaben siehe PICMG 3.0 B 8 16 20 24 3 2 9,4 10 0,05 13,7 12 1,75 0.05 18,5 14,5 21,2 23,9 26,6 A 7 www.erni.com Catalog E XXXXXX 01/07 Edition 3 6,6 3,9 2,2 9,6 0,05 2x 2,5 +0,1 +0,2 10,45 max. () 5,5 6 16,1 -0,1 4,5 4,5 264,5 183,5 66,5 ERNI Electronics GmbH & Co. KG Europe South America Africa Seestrasse 9, Postfach 73099 Adelberg, Deutschland Telefon +49 (0)71 66 50-0 Fax +49 (0)71 66 50-282 info@erni.de ERNI Electronics, Inc. North America Canada Mexico 3005 E. Boundary Terrace Midlothian, VA 23112 USA Tel +1 (804) 228-4100 Fax +1 (804) 228-4099 info.usa@erni.com ERNI Asia Holding Pte Ltd. Asia Australia New Zealand Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 info@erni-asia.com www.erni.com ERNI Electronics GmbH & Co. KG 2007 • Printed in Germany. A policy of continuous improvement is followed and the right to alter any published data without notice is reserved. 8 www.erni.com Catalog E XXXXXX 01/07 Edition 3