GE CRITICAL POWER APXS003A0X-SRZ

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number APXS003A0X-SRZ
Manufacturer GE CRITICAL POWER
Category Capacitors »  DC-DC Converter
Price Request Quote
Lead Time Request Quote

Description

NON-ISOLATED DC/DC CONVERTERS SMT IN 4.5-14VDC OUT 0.59-5.5VDC 3A

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

Electronics Finder is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need an APXS003A0X-SRZ? We can help you find it at a competitive price!

Specifications

Manufacturer GE Critical Power
Manufacturers Part # APXS003A0X-SRZ
Industry Aliases CC109125952, APXS003A0X-SRZ
Brand GE Critical Power
Packaging Tape and Reel
Series APXS003A0X
Factory Pack Quantity 400
Connection Type SMD/SMT
Dimensions 0.48 x 0.48 x 0.25"
Mechanical Style Non-Isolated / POL
Operating Temperature - 40 to + 85°C
Output Amps 1 3 A
Power 17 W
Subcategory DC-DC Converter

Datasheet

Download "APTS003A0X?TNR=Data%20Sheets|APTS003A0X|generic.pdf" (701 KiB)

Extracted Text

Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Module 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Features  Compliant to RoHS EU Directive 2002/95/EC (Z versions)  Compatible in a Pb-free or SnPb reflow environment (Z versions)  DOSA based  Wide Input voltage range (4.5Vdc-14Vdc)  Output voltage programmable from 0.59Vdc to 5.5Vdc via external resistor TM  Tunable Loop to optimize dynamic output voltage RoHS Compliant response TM EZ-SEQUENCE  Flexible output voltage sequencing EZ-SEQUENCE (APTS versions)  Remote sense Applications  Power Good signal  Distributed power architectures  Fixed switching frequency  Intermediate bus voltage applications  Output overcurrent protection (non-latching)  Telecommunications equipment  Overtemperature protection  Servers and storage applications  Remote On/Off  Networking equipment  Ability to sink and source current  Industrial equipment  Cost efficient open frame design Vin+ Vout+ VIN VOUT  Small size: 12.2 mm x 12.2 mm x 6.25 mm SENSE PGOOD (0.48 in x 0.48 in x 0.246 in) RTUNE MODULE  Wide operating temperature range [-40°C to 105°C(Ruggedized: -D), 85°C(Regular)] SEQ Cin Co CTUNE †  UL* 60950-1Recognized, CSA C22.2 No. 60950-1-03 ‡ ON/OFF TRIM Certified, and VDE 0805:2001-12 (EN60950-1) Licensed Q1 RTrim  ISO** 9001 and ISO 14001 certified manufacturing GND facilities Description TM The 12V PicoTLynx 3A power modules are non-isolated dc-dc converters that can deliver up to 3A of output current. These modules operate over a wide range of input voltage (VIN = 4.5Vdc-14Vdc) and provide a precisely regulated output voltage from 0.59Vdc to 5.5Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over current and overtemperature protection, and output voltage sequencing (APTS versions). The Ruggedized version (-D) is capable TM of operation up to 105°C and withstand high levels of shock and vibration. A new feature, the Tunable Loop , allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. ‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards May 2, 2013 ©2013 General Electric Company. All rights reserved. Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All VIN -0.3 15 Vdc Continuous Sequencing Voltage APTS VSEQ -0.3 ViN Vdc Operating Ambient Temperature All TA -40 85 °C (see Thermal Considerations section) -D version TA -40 105 °C Storage Temperature All Tstg -55 125 °C Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 4.5 ⎯ 14.0 Vdc Maximum Input Current All I 3.5 Adc IN,max (V =4.5V to 14V, I =I) IN O O, max Input No Load Current VO,set = 0.6 Vdc IIN,No load 17 mA (V = 12.0Vdc, I = 0, module enabled) V = 3.3Vdc I 55 mA IN O O,set IN,No load Input Stand-by Current All I 1 mA IN,stand-by (VIN = 12.0Vdc, module disabled) 2 2 Inrush Transient All It 1 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; V =0 to 14V I = All 43 mAp-p IN , O I ; See Test Configurations) Omax Input Ripple Rejection (120Hz) All 50 dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 5A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 2 GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Electrical Specifications (continued) Parameter Device Symbol Min Typ Max Unit Output Voltage Set-point (with 0.5% tolerance for external All V -1.5 +1.5 % V O, set O, set resistor used to set output voltage) Output Voltage (Over all operating input voltage, resistive load, All V -3.0 +3.0 % V O, set ⎯ O, set and temperature conditions until end of life) Adjustment Range (selected by an external resistor) (Some output voltages may not be possible depending on the All V 0.59 5.5 Vdc O input voltage – see Feature Descriptions Section) Remote Sense Range All 0.5 Vdc Output Regulation (for VO ≥ 2.5Vdc) Line (VIN=VIN, min to VIN, max) All ⎯ +0.4 % VO, set Load (I =I to I) All 10 mV O O, min O, max ⎯ Temperature (T =T to T) All +0.4 % V ref A, min A, max ⎯ O, set Output Regulation (for VO < 2.5Vdc) Line (VIN=VIN, min to VIN, max) All ⎯ 10 mV Load (I =I to I) All 5 mV O O, min O, max ⎯ Temperature (Tref=TA, min to TA, max) All ⎯ 5 mV Remote Sense Range All 0.5 V Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max Co = 0.1μF // 10 μF ceramic capacitors) V > 3.3V Peak-to-Peak (5Hz to 20MHz bandwidth) All 110 135 mV O ⎯ pk-pk RMS (5Hz to 20MHz bandwidth) All 35 45 mVrms V ≤ 3.3V Peak-to-Peak (5Hz to 20MHz bandwidth) All 50 110 mV O ⎯ pk-pk RMS (5Hz to 20MHz bandwidth) All 20 40 mVrms 1 External Capacitance TM Without the Tunable Loop ESR ≥ 1 mΩ All CO, max 0 ⎯ 47 μF TM With the Tunable Loop ESR ≥ 0.15 mΩ AllC 0 1000 μF O, max ⎯ ESR ≥ 10 mΩ All CO, max 0 ⎯ 3000 μF Output Current All Io 0 3 Adc Output Current Limit Inception (Hiccup Mode ) All I 200 % I O, lim o,max Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) All IO, s/c 300 mA 73.3 Efficiency V = 0.59Vdc η % O,set 82.9 VIN= 12Vdc, TA=25°C VO, set = 1.2Vdc η % 86.5 I =I V = V V = 1.8Vdc η % O O, max , O O,set O,set 88.9 V = 2.5Vdc η % O,set 90.6 V = 3.3Vdc η % O,set 92.6 V = 5.0Vdc η % O,set Switching Frequency All f 600 kHz sw ⎯ ⎯ Dynamic Load Response (dIo/dt=10A/μs; VIN = VIN, nom; Vout = 1.8V, TA=25°C) Load Change from Io= 50% to 100% of Io,max; Co = 0 Peak Deviation All V 220 mV pk Settling Time (Vo<10% peak deviation) All ts 60 μs Load Change from Io= 100% to 50%of Io,max: Co = 0 Peak Deviation All V 240 mV pk Settling Time (Vo<10% peak deviation) All t 60 μs s 1 TM External capacitors may require using the new Tunable Loop feature to ensure that the module is stable as well as getting the best TM transient response. See the Tunable Loop section for details. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 3 Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current General Specifications Parameter Device Min Typ Max Unit Calculated MTBF (IO=0.8IO, max, TA=40°C) Telcordia Issue 2 Method 1 Case 3 APTS 15,694,689 Hours APXS 25,017,068 Hours Weight 1.55 (0.0546) g (oz.) ⎯ ⎯ Feature Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. See Feature Descriptions for additional information. Parameter Device Symbol Min Typ Max Unit On/Off Signal Interface (V =V to V ; open collector or equivalent, IN IN, min IN, max Signal referenced to GND) Device is with suffix “4” – Positive Logic (See Ordering Information) Logic High (Module ON) Input High Current All IIH ⎯ 10 µA Input High Voltage All VIH 3.5 V V ⎯ IN,max Logic Low (Module OFF) Input Low Current All IIL ⎯ ⎯ 1 mA Input Low Voltage All VIL -0.3 0.8 V ⎯ Device Code with no suffix – Negative Logic (See Ordering Information) (On/OFF pin is open collector/drain logic input with external pull-up resistor; signal referenced to GND) Logic High (Module OFF) Input High Current All IIH — — 1 mA Input High Voltage All VIH 3.5 — VIN, max Vdc Logic Low (Module ON) Input low Current All IIL — — 10 μA Input Low Voltage All VIL -0.2 — 0.6 Vdc Turn-On Delay and Rise Times (VIN=VIN, nom, IO=IO, max , VO to within ±1% of steady state) Case 1: On/Off input is enabled and then input power is All Tdelay — 2 — msec applied (delay from instant at which V = V until Vo = IN IN, min 10% of Vo, set) Case 2: Input power is applied for at least one second and All Tdelay — 2 — msec then the On/Off input is enabled (delay from instant at which Von/Off is enabled until Vo = 10% of Vo, set) Output voltage Rise time (time for Vo to rise from All Trise — 4 — msec 10% of Vo, set to 90% of Vo, set) o Output voltage overshoot (T = 25C 3.0 % V A O, set V = V to V ,I = I to I) IN IN, min IN, max O O, min O, max With or without maximum external capacitance Over Temperature Protection All Tref 140 °C (See Thermal Considerations section) Tracking Accuracy (Power-Up: 2V/ms) APTS VSEQ –Vo 100 mV (Power-Down: 2V/ms) APTS VSEQ –Vo 100 mV (V to V ; I to I VSEQ < Vo) IN, min IN, max O, min O, max May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 4 GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Feature Specifications (cont.) Parameter Device Symbol Min Typ Max Units Input Undervoltage Lockout Turn-on Threshold All 4.3 Vdc Turn-off Threshold All 3.3 Vdc Hysteresis All 0.4 Vdc PGOOD (Power Good) Signal Interface Open Drain, V ≤ 5VDC supply Output Voltage Limit for PGOOD All 90% 110% VO, set Pulldown resistance of PGOOD pin All 7 50 Ω May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 5 Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Characteristic Curves TM o The following figures provide typical characteristics for the 12V PicoTLynx 3A at 0.6Vo and at 25 C. 85 4 80 75 3 Vin=4.5V 70 1m/s Vin=14V (200LFM) 65 2 Vin=12V Standard Part (85°C) 0.5m/s (100LFM) 60 Ruggedized (D) Part (105°C) NC 55 1 00.5 11.522.5 3 55 65 75 85 95 105 O OUTPUT CURRENT, IO (A) AMBIENT TEMPERATURE, TA C Figure 2. Derating Output Current versus Ambient Figure 1. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 4. Transient Response to Dynamic Load Change from Figure 3. Typical output ripple and noise (VIN = 12V, Io = Io,max). 0% to 50% to 0% . TIME, t (2ms/div) TIME, t (2ms/div) Figure 6. Typical Start-up Using Input Voltage (VIN = 12V, Io = Figure 5. Typical Start-up Using On/Off Voltage (Io = Io,max). Io,max). May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 6 ON/OFF VOLTAGE OUTPUT VOLTAGE OUTPUT VOLTAGE VON/OFF (V) (5V/div) VO (V) (200mV/div) EFFICIENCY, η (%) VO (V) (10mV/div) OUTPUT CURRENT, OUTPUT VOLTAGE INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT, Io (A) IO (A) (1Adiv) VO (V) (100mV/div) VIN (V) (5V/div) VO (V) (200mV/div) GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Characteristic Curves TM o The following figures provide typical characteristics for the 12V PicoTLynx 3A at 1.2Vo and at 25 C. 90 4 85 3 Vin=4.5V 80 Vin=14V 1m/s 75 Vin=12V (200LFM) 2 Standard Part 0.5m/s (85°C) 70 (100LFM) Ruggedized (D) NC Part (105°C) 65 1 00.5 11.5 22.5 3 55 65 75 85 95 105 O OUTPUT CURRENT, I (A) AMBIENT TEMPERATURE, T C O A Figure 8. Derating Output Current versus Ambient Figure 7. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 10. Transient Response to Dynamic Load Change from Figure 9. Typical output ripple and noise (VIN = 12V, Io = Io,max). 0% to 50% to 0%. TIME, t (2ms/div) TIME, t (2ms/div) Figure 12. Typical Start-up Using Input Voltage (VIN = 12V, Io = Figure 11. Typical Start-up Using On/Off Voltage (Io = Io,max). Io,max). May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 7 ION/OFF VOLTAGE OUTPUT VOLTAGE OUTPUT VOLTAGE VON/OFF (V) (5V/div) VO (V) (500mV/div) EFFICIENCY, η (%) VO (V) (10mV/div) OUTPUT CURRENT, OUTPUT VOLTAGE INPUT VOLTAGE OUTPUT VOLTAGE I (A) (1Adiv) V (V) (100mV/div) OUTPUT CURRENT, Io (A) O O V (V) (5V/div) V (V) (500mV/div) IN O Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Characteristic Curves TM o The following figures provide typical characteristics for the 12V PicoTLynx 3A 1.8Vo and at 25 C. 95 4 90 3 85 Vin=4.5V Vin=14V 1m/s 80 (200LFM) Vin=12V 2 Standard Part 0.5m/s (85°C) 75 (100LFM) Ruggedized (D) Part (105°C) NC 70 1 00.5 11.5 22.5 3 55 65 75 85 95 105 O OUTPUT CURRENT, I (A) AMBIENT TEMPERATURE, T C O A Figure 14. Derating Output Current versus Ambient Figure 13. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 15. Typical output ripple and noise (VIN = 12V, Io = Figure 16. Transient Response to Dynamic Load Change from Io,max). 0% to 50% to 0%. TIME, t (2ms/div) TIME, t (2ms/div) Figure 18. Typical Start-up Using Input Voltage (VIN = 12V, Io = Figure 17. Typical Start-up Using On/Off Voltage (Io = Io,max). Io,max). May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 8 ON/OFF VOLTAGE OUTPUT VOLTAGE OUTPUT VOLTAGE VON/OFF (V) (5V/div) VO (V) (500mV/div) EFFICIENCY, η (%) VO (V) (10mV/div) OUTPUT CURRENT, OUTPUT VOLTAGE INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT, Io (A) IO (A) (1Adiv) VO (V) (100mV/div) VIN (V) (5V/div) VO (V) (500mV/div) GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Characteristic Curves TM o The following figures provide typical characteristics for the 12V PicoTLynx 3A 2.5Vo and at 25 C. 95 4 90 3 Vin=4.5V 85 Vin=14V Vin=12V 1m/s 80 1.5m/s (200LFM) (300LFM) 2 Standard Part 0.5m/s (85°C) (100LFM) 75 Ruggedized (D) Part (105°C) NC 70 1 00.5 11.522.5 3 55 65 75 85 95 105 O OUTPUT CURRENT, IO (A) AMBIENT TEMPERATURE, TA C Figure 20. Derating Output Current versus Ambient Figure 19. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 21. Typical output ripple and noise (VIN = 12V, Io = Figure 22. Transient Response to Dynamic Load Change from Io,max). 0% to 50% to 0%. TIME, t (2ms/div) TIME, t (2ms/div) Figure 24. Typical Start-up Using Input Voltage (VIN = 12V, Io = Figure 23. Typical Start-up Using On/Off Voltage (Io = Io,max). Io,max). May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 9 ON/OFF VOLTAGE OUTPUT VOLTAGE OUTPUT VOLTAGE VON/OFF (V) (5V/div) VO (V) (1V/div) EFFICIENCY, η (%) VO (V) (10mV/div) OUTPUT CURRENT, OUTPUT VOLTAGE INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT, Io (A) IO (A) (1Adiv) VO (V) (100mV/div) VIN (V) (5V/div) VO (V) (1V/div) Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Characteristic Curves TM o The following figures provide typical characteristics for the 12V PicoTLynx 3A 3.3Vo and at 25 C. 100 4 95 3 90 Vin=4.5V 1.5m/s 85 (300LFM) Vin=14V Vin=12V 80 2 Standard Part (85°C) 0.5m/s (100LFM) 75 1m/s Ruggedized (D) (200LFM) NC Part (105°C) 1 70 00.5 11.5 2 2.5 3 55 65 75 85 95 105 O OUTPUT CURRENT, IO (A) AMBIENT TEMPERATURE, TA C Figure 26. Derating Output Current versus Ambient Figure 25. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 27. Typical output ripple and noise (VIN = 12V, Io = Figure 28. Transient Response to Dynamic Load Change from Io,max). 0% 50% to 0%. TIME, t (2ms/div) TIME, t (2ms/div) Figure 30. Typical Start-up Using Input Voltage (VIN = 12V, Io = Figure 29. Typical Start-up Using On/Off Voltage (Io = Io,max). Io,max). May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 10 ON/OFF VOLTAGE OUTPUT VOLTAGE OUTPUT VOLTAGE VON/OFF (V) (5V/div) VO (V) (1V/div) EFFICIENCY, η (%) VO (V) (10mV/div) OUTPUT CURRENT, OUTPUT VOLTAGE INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT, Io (A) IO (A) (1Adiv) VO (V) (200mV/div) VIN (V) (5V/div) VO (V) (1V/div) GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Characteristic Curves TM o The following figures provide typical characteristics for the 12V PicoTLynx 3A at 5Vo and at 25 C. 100 4 95 90 3 Vin=14V 85 1.5m/s Vin=8V Vin=12V 2m/s (300LFM) 80 2 Standard Part (400LFM) 1m/s (85°C) (200LFM) 75 Ruggedized (D) 0.5m/s (100LFM) Part (105°C) NC 1 70 0 0.5 1 1.5 2 2.5 3 55 65 75 85 95 105 O OUTPUT CURRENT, IO (A) AMBIENT TEMPERATURE, TA C Figure 34. Derating Output Current versus Ambient Figure 31. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 32. Typical output ripple and noise (VIN = 12V, Io = Figure 35. Transient Response to Dynamic Load Change from Io,max). 0% 50% to 0%. TIME, t (2ms/div) TIME, t (2ms/div) Figure 36. Typical Start-up Using Input Voltage (VIN = 12V, Io = Figure 33. Typical Start-up Using On/Off Voltage (Io = Io,max). Io,max). May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 11 ON/OFF VOLTAGE OUTPUT VOLTAGE OUTPUT VOLTAGE VON/OFF (V) (5V/div) VO (V) (2V/div) EFFICIENCY, η (%) VO (V) (20mV/div) OUTPUT CURRENT, OUTPUT VOLTAGE INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT, Io (A) IO (A) (1Adiv) VO (V) (200mV/div) VIN (V) (5V/div) VO (V) (2V/div) Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Test Configurations Design Considerations Input Filtering CURRENT PROBE TO OSCILLOSCOPE TM The 12V PicoTLynx 3A module should be connected to a L TEST low ac-impedance source. A highly inductive source can V (+) IN 1μH affect the stability of the module. An input capacitance must be placed directly adjacent to the input pin of the C module, to minimize input ripple voltage and ensure IN C 1000μF S Electrolytic module stability. 2x100μF E.S.R.<0.1Ω Tantalum To minimize input voltage ripple, ceramic capacitors are @ 20°C 100kHz recommended at the input of the module. Figure 40 COM shows the input ripple voltage for various output voltages at 3A of load current with 1x10 µF or 1x22 µF ceramic NOTE: Measure input reflected ripple current with a simulated capacitors and an input of 12V. source inductance (L ) of 1μH. Capacitor C offsets TEST S possible battery impedance. Measure current as shown above. 250 Figure 37. Input Reflected Ripple Current Test Setup. 1x10uF 200 1x22uF COPPER STRIP 150 RESISTIVE Vo+ LOAD 100 10uF 0.1uF 50 COM SCOPE USING 0 BNC SOCKET 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 GROUND PLANE NOTE: All voltage measurements to be taken at the module Output Voltage (Vdc) terminals, as shown above. If sockets are used then Figure 40. Input ripple voltage for various output Kelvin connections are required at the module terminals to avoid measurement errors due to socket contact voltages with 1x10 µF or 1x22 µF ceramic capacitors at resistance. the input (3A load). Input voltage is 12V. Figure 38. Output Ripple and Noise Test Setup. Output Filtering TM The 12V PicoTLynx 3A modules are designed for low Rdistribution Rcontact Rcontact Rdistribution V (+) V output ripple voltage and will meet the maximum output IN O ripple specification with 0.1 µF ceramic and 10 µF ceramic capacitors at the output of the module. However, additional R LOAD output filtering may be required by the system designer for V V IN O a number of reasons. First, there may be a need to further reduce the output ripple and noise of the module. Second, Rdistribution Rcontact Rcontact Rdistribution the dynamic response characteristics may need to be COM COM customized to a particular load step change. NOTE: All voltage measurements to be taken at the module To reduce the output ripple and improve the dynamic terminals, as shown above. If sockets are used then response to a step load change, additional capacitance at Kelvin connections are required at the module terminals to avoid measurement errors due to socket contact the output can be used. Low ESR polymer and ceramic resistance. capacitors are recommended to improve the dynamic response of the module. Figure 41 provides output ripple Figure 39. Output Voltage and Efficiency Test Setup. information for different external capacitance values at various Vo and a full load current of 3A. For stable operation V . I O O of the module, limit the capacitance to less than the Efficiency = x 100 % η V . I IN IN maximum output capacitance as specified in the electrical specification table. Optimal performance of the module can TM be achieved by using the Tunable Loop feature described later in this data sheet. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 12 BATTERY Input Ripple Voltage (mVp-p) GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Feature Descriptions 110 1x10uF External Cap 100 Remote On/Off 1x47uF External Cap 90 2x47uF External cap 4x47uF External Cap TM The 12V PicoTLynx 3A modules feature an On/Off pin for 80 70 remote On/Off operation. Two On/Off logic options are 60 available. In the Positive Logic On/Off option, (device code 50 suffix “4” – see Ordering Information), the module turns ON 40 during a logic High on the On/Off pin and turns OFF during a 30 logic Low. With the Negative Logic On/Off option, (no device 20 code suffix, see Ordering Information), the module turns OFF 10 during logic High and ON during logic Low. The On/Off 0 signal is always referenced to ground. For either On/Off logic 0.5 1.5 2.5 3.5 4.5 5.5 option, leaving the On/Off pin disconnected will turn the Output Voltage(Volts) module ON when input voltage is present. Figure 41. Output ripple voltage for various output For positive logic modules, the circuit configuration for using voltages with external 1x10 µF, 1x47 µF, 2x47 µF or 4x47 the On/Off pin is shown in Figure 42. When the external µF ceramic capacitors at the output (3A load). Input transistor Q1 is in the OFF state, the internal PWM Enable voltage is 12V. signal is pulled high through an internal 1.5MΩ resistor and the external pullup resistor and the module is ON. When transistor Q1 is turned ON, the On/Off pin is pulled low and Safety Considerations the module is OFF. A suggested value for R is 20kΩ. pullup For safety agency approval the power module must be installed in compliance with the spacing and separation VIN+ MODULE requirements of the end-use safety agency standards, i.e., UL 60950-1, CSA C22.2 No. 60950-1-03, and VDE 0850:2001-12 (EN60950-1) Licensed. Rpullup 1.5MEG For the converter output to be considered meeting the I ON/OFF requirements of safety extra-low voltage (SELV), the input must meet SELV requirements. The power module has extra- + 20K PWM Enable ON/OFF low voltage (ELV) outputs when all inputs are ELV. V ON/OFF The input to these units is to be provided with a fast-acting fuse with a maximum rating of 5A in the positive input lead. Q1 GND _ Figure 42. Circuit configuration for using positive On/Off logic. For negative logic On/Off modules, the circuit configuration is shown in Fig. 43. The On/Off pin should be pulled high with an external pull-up resistor (suggested value for the 4.5V to 14V input range is 20Kohms). When transistor Q2 is in the OFF state, the On/Off pin is pulled high, transistor Q1 is turned ON and the module is OFF. To turn the module ON, Q2 is turned ON pulling the On/Off pin low, turning transistor Q1 OFF resulting in the PWM Enable pin going high. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 13 Ripple(mVp-p) GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current 16 VIN+ MODULE 14 12 Rpullup1 1.5MEG Upper Limit 10 8 6 I ON/OFF PWM Enable ON/OFF 4 Q1 + 22K Lower Limit 2 V ON/OFF 22K 0 Q2 0.51 1.5 2 2.53 3.5 4 4.555.5 6 GND _ Output Voltage (V) Figure 44. Output Voltage vs. Input Voltage Set Point Area Figure 43. Circuit configuration for using negative On/Off plot showing limits where the output voltage can be set logic. for different input voltages. Overcurrent Protection Without an external resistor between Trim and GND pins, the output of the module will be 0.59Vdc. To calculate the To provide protection in a fault (output overload) condition, value of the trim resistor, Rtrim for a desired output voltage, the unit is equipped with internal current-limiting circuitry use the following equation: and can endure current limiting continuously. At the point of current-limit inception, the unit enters hiccup mode. The unit  5.91  operates normally once the output current is brought back Rtrim = kΩ into its specified range.   () Vo − 0.591   Over Temperature Protection Rtrim is the external resistor in kΩ To provide protection in a fault condition, the unit is Vo is the desired output voltage. equipped with a thermal shutdown circuit. The unit will o Table 1 provides Rtrim values required for some common shutdown if the overtemperature threshold of 140 C is output voltages. exceeded at the thermal reference point Tref. The thermal shutdown is not intended as a guarantee that the unit will Table 1 survive temperatures beyond its rating. Once the unit goes into thermal shutdown it will then wait to cool before V (V) Rtrim (KΩ) O, set attempting to restart. 0.6 656.7 1.0 14.45 Input Undervoltage Lockout 1.2 9.704 1.5 6.502 At input voltages below the input undervoltage lockout limit, the module operation is disabled. The module will begin to 1.8 4.888 operate at an input voltage above the undervoltage lockout 2.5 3.096 turn-on threshold. 3.3 2.182 5.0 1.340 Output Voltage Programming TM The output voltage of the 12V PicoTLynx 3A module can By using a ±0.5% tolerance trim resistor with a TC of be programmed to any voltage from 0.59dc to 5.5Vdc by ±100ppm, a set point tolerance of ±1.5% can be achieved as connecting a resistor between the Trim and GND pins of the specified in the electrical specification. module. Certain restrictions apply on the output voltage set point depending on the input voltage. These are shown in Remote Sense the Output Voltage vs. Input Voltage Set Point Area plot in TM The 12V PicoTLynx 3A modules have a Remote Sense Fig. 44. The Upper Limit curve shows that for output feature to minimize the effects of distribution losses by voltages of 0.9V and lower, the input voltage must be lower regulating the voltage at the SENSE pin. The voltage than the maximum of 14V. The Lower Limit curve shows between the SENSE pin and VOUT pin must not exceed 0.5V. that for output voltages of 3.8V and higher, the input voltage Note that the output voltage of the module cannot exceed needs to be larger than the minimum of 4.5V. the specified maximum value. This includes the voltage drop between the SENSE and Vout pins. When the Remote Sense feature is not being used, connect the SENSE pin to the VOUT pin. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 14 Input Voltage (v) Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Monotonic Start-up and Shutdown V (+) V (+) IN O TM The 12V PicoTLynx 3A modules have monotonic start-up and shutdown behavior for any combination of rated input SENSE voltage, output current and operating temperature range. ON/OFF LOAD TRIM Startup into Pre-biased Output R tri m TM The 12V Pico TLynx 3A modules can start into a prebiased GND output as long as the prebias voltage is 0.5V less than the set output voltage. Note that prebias operation is not supported when output voltage sequencing is used. Figure 44. Circuit configuration for programming output voltage using an external resistor. Output Voltage Sequencing TM Voltage Margining The 12V PicoTLynx 3A modules (APTS versions) include a sequencing feature, EZ-SEQUENCE that enables users to Output voltage margining can be implemented in the 12V implement various types of output voltage sequencing in TM PicoTLynx 3A modules by connecting a resistor, Rmargin-up, their applications. This is accomplished via an additional from the Trim pin to the ground pin for margining-up the sequencing pin. When not using the sequencing feature, output voltage and by connecting a resistor, Rmargin-down, from either tie the SEQ pin to VIN or leave it unconnected. the Trim pin to output pin for margining-down. Figure 46 shows the circuit configuration for output voltage margining. When an analog voltage is applied to the SEQ pin, the The POL Programming Tool, available at output voltage tracks this voltage until the output reaches www.lineagepower.com under the Design Tools section, also the set-point voltage. The final value of the SEQ voltage calculates the values of R and R for a specific margin-up margin-down must be set higher than the set-point voltage of the module. output voltage and % margin. Please consult your local GE The output voltage follows the voltage on the SEQ pin on a technical representative for additional details. one-to-one volt basis. By connecting multiple modules together, multiple modules can track their output voltages to the voltage applied on the SEQ pin. Vo For proper voltage sequencing, first, input voltage is applied to the module. The On/Off pin of the module is left Rmargin-down unconnected (or tied to GND for negative logic modules or MODULE tied to VIN for positive logic modules) so that the module is ON by default. After applying input voltage to the module, a Q2 minimum 10msec delay is required before applying voltage on the SEQ pin. During this time, a voltage of 50mV (± 20 Trim mV) is maintained on the SEQ pin. This delay gives the Rmargin-up module enough time to complete its internal power-up soft- start cycle. During the delay time, the SEQ pin should be held Rtrim close to ground (nominally 50mV ± 20 mV). This is required to keep the internal op-amp out of saturation thus Q1 preventing output overshoot during the start of the GND sequencing ramp. By selecting resistor R1 (see fig. 47) according to the following equation Figure 46. Circuit Configuration for margining Output 24950 ohms, R1 = voltage. V − 0.05 IN the voltage at the sequencing pin will be 50mV when the sequencing signal is at zero. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 15 GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current External capacitors are usually added to the output of the MODULE VIN+ module for two reasons: to reduce output ripple and noise (see Figure 41) and to reduce output voltage deviations from the steady-state value in the presence of dynamic load current changes. Adding external capacitance however affects the voltage control loop of the module, typically 499K causing the loop to slow down with sluggish response. + Larger values of external capacitance could also cause the OUT module to become unstable. R1 TM - The Tunable Loop allows the user to externally adjust the SEQ 10K voltage control loop to match the filter network connected TM to the output of the module. The Tunable Loop is implemented by connecting a series R-C between the SENSE GND and TRIM pins of the module, as shown in Fig. 48. This R-C allows the user to externally adjust the voltage loop Figure 47. Circuit showing connection of the sequencing feedback compensation of the module. signal to the SEQ pin. After the 10msec delay, an analog voltage is applied to the SEQ pin and the output voltage of the module will track this VOUT voltage on a one-to-one volt bases until the output reaches SENSE the set-point voltage. To initiate simultaneous shutdown of RTUNE the modules, the SEQ pin voltage is lowered in a controlled manner. The output voltage of the modules tracks the C O voltages below their set-point voltages on a one-to-one MODULE basis. A valid input voltage must be maintained until the CTUNE tracking and output voltages reach ground potential. TM TRIM When using the EZ-SEQUENCE feature to control start-up of the module, pre-bias immunity during start-up is disabled. RTrim GND The pre-bias immunity feature of the module relies on the module being in the diode-mode during start-up. When TM using the EZ-SEQUENCE feature, modules goes through an internal set-up time of 10msec, and will be in synchronous Figure. 48. Circuit diagram showing connection of R TUME rectification mode when the voltage at the SEQ pin is and C to tune the control loop of the module. TUNE applied. This will result in the module sinking current if a Recommended values of R and C for different output TUNE TUNE pre-bias voltage is present at the output of the module. capacitor combinations are given in Tables 2 and 3. Table 2 When pre-bias immunity during start-up is required, the EZ- shows the recommended values of RTUNE and CTUNE for TM SEQUENCE feature must be disabled. For additional different values of ceramic output capacitors up to 470uF TM guidelines on using the EZ-SEQUENCE feature please refer that might be needed for an application to meet output to Application Note AN04-008 “Application Guidelines for ripple and noise requirements. Selecting RTUNE and CTUNE Non-Isolated Converters: Guidelines for Sequencing of according to Table 2 will ensure stable operation of the Multiple Modules”, or contact the GE technical module. representative for additional information. In applications with tight output voltage limits in the Power Good presence of dynamic current loading, additional output capacitance will be required. Table 3 lists recommended TM The 12V Pico TLynx 3A modules provide a Power Good values of RTUNE and CTUNE in order to meet 2% output (PGOOD) signal that is implemented with an open-drain voltage deviation limits for some common output voltages output to indicate that the output voltage is within the in the presence of a 1.5A to 3A step change (50% of full regulation limits of the power module. The PGOOD signal will load), with an input voltage of 12V. be de-asserted to a low state if any condition such as overtemperature, overcurrent or loss of regulation occurs Please contact your GE technical representative to obtain that would result in the output voltage going ±10% outside more details of this feature as well as for guidelines on how the setpoint value. The PGOOD terminal should be to select the right value of external R-C to tune the module connected through a pullup resistor (suggested value for best transient performance and stable operation for 100KΩ) to a source of 5VDC or less. other output capacitance values or input voltages other than 12V. TM Tunable Loop TM The 12V Pico TLynx 3A modules have a new feature that Table 2. General recommended values of of R and TUNE optimizes transient response of the module called Tunable C for Vin=12V and various external ceramic capacitor TUNE TM Loop . combinations. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 16 Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Co 1x47μF 2x47μF 4x47μF 6x47μF 10x47μF RTUNE 270 180 100 75 75 CTUNE 2200pF 4700pF 18nF 18nF 22nF Table 3. Recommended values of RTUNE and CTUNE to obtain transient deviation of 2% of Vout for a 1.5A step load with Vin=12V. Vo 5V 3.3V 2.5V 1.8V 1.2V 0.6V 1x47μF Co 1x22μF 1x47μF 2x47μF 2x47μF 3x47μF + 330μF polymer RTUNE 270 270 180 150 150 100 CTUNE 820pF 2200pF 4700pF 4700pF 10nF 15nF ΔV 100mV 64mV 37mV 36mV 22mV 12mV May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 17 GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Thermal Considerations Power modules operate in a variety of thermal environments; however, sufficient cooling should always be provided to help ensure reliable operation. Considerations include ambient temperature, airflow, module power dissipation, and the need for increased reliability. A reduction in the operating temperature of the module will result in an increase in reliability. The thermal data presented here is based on physical measurements taken in a wind tunnel. The test set-up is shown in Figure 49. The preferred airflow direction for the module is in Figure 50. 25.4_ Wind Tunnel (1.0) PWBs Power Module 76.2_ (3.0) x Probe Location for measuring Figure 50. Preferred airflow direction and locations of hot- 12.7_ airflow and spots of the module (Tref). (0.50) ambient temperature Air flow Figure 49. Thermal Test Setup. The thermal reference points, Tref used in the specifications are also shown in Figure 50. For reliable operation the o C. The temperatures at these points should not exceed 120 output power of the module should not exceed the rated power of the module (Vo,set x Io,max). Please refer to the Application Note “Thermal Characterization Process For Open-Frame Board-Mounted Power Modules” for a detailed discussion of thermal aspects including maximum device temperatures. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 18 Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Shock and Vibration The ruggedized (-D version) of the modules are designed to withstand elevated levels of shock and vibration to be able to operate in harsh environments. The ruggedized modules have been successfully tested to the following conditions: Non operating random vibration: Random vibration tests conducted at 25C, 10 to 2000Hz, for 30 minutes each level, starting from 30Grms (Z axis) and up to 50Grms (Z axis). The units were then subjected to two more tests of 50Grms at 30 minutes each for a total of 90 minutes. Operating shock to 40G per Mil Std. 810F, Method 516.4 Procedure I: The modules were tested in opposing directions along each of three orthogonal axes, with waveform and amplitude of the shock impulse characteristics as follows: All shocks were half sine pulses, 11 milliseconds (ms) in duration in all 3 axes. Units were tested to the Functional Shock Test of MIL-STD-810, Method 516.4, Procedure I - Figure 516.4-4. A shock magnitude of 40G was utilized. The operational units were subjected to three shocks in each direction along three axes for a total of eighteen shocks. Operating vibration per Mil Std 810F, Method 514.5 Procedure I: The ruggedized (-D version) modules are designed and tested to vibration levels as outlined in MIL-STD-810F, Method 514.5, and Procedure 1, using the Power Spectral Density (PSD) profiles as shown in Table 1 and Table 2 for all axes. Full compliance with performance specifications was required during the performance test. No damage was allowed to the module and full compliance to performance specifications was required when the endurance environment was removed. The module was tested per MIL-STD- 810, Method 514.5, Procedure I, for functional (performance) and endurance random vibration using the performance and endurance levels shown in Table 4 and Table 5 for all axes. The performance test has been split, with one half accomplished before the endurance test and one half after the endurance test (in each axis). The duration of the performance test was at least 16 minutes total per axis and at least 120 minutes total per axis for the endurance test. The endurance test period was 2 hours minimum per axis. Table 4: Performance Vibration Qualification - All Axes PSD Level PSD Level PSD Level Frequency (Hz) Frequency (Hz) Frequency (Hz) (G2/Hz) (G2/Hz) (G2/Hz) 10 1.14E-03 170 2.54E-03 690 1.03E-03 30 5.96E-03 230 3.70E-03 800 7.29E-03 40 9.53E-04 290 7.99E-04 890 1.00E-03 50 2.08E-03 340 1.12E-02 1070 2.67E-03 90 2.08E-03 370 1.12E-02 1240 1.08E-03 110 7.05E-04 430 8.84E-04 1550 2.54E-03 130 5.00E-03 490 1.54E-03 1780 2.88E-03 140 8.20E-04 560 5.62E-04 2000 5.62E-04 Table 5: Endurance Vibration Qualification - All Axes PSD Level PSD Level PSD Level Frequency (Hz) Frequency (Hz) Frequency (Hz) (G2/Hz) (G2/Hz) (G2/Hz) 10 0.00803 170 0.01795 690 0.00727 30 0.04216 230 0.02616 800 0.05155 40 0.00674 290 0.00565 890 0.00709 50 0.01468 340 0.07901 1070 0.01887 90 0.01468 370 0.07901 1240 0.00764 110 0.00498 430 0.00625 1550 0.01795 130 0.03536 490 0.01086 1780 0.02035 140 0.0058 560 0.00398 2000 0.00398 May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 19 GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Example Application Circuit Requirements: Vin: 12V Vout: 1.8V Iout: 2.25A max., worst case load transient is from 1.5A to 2.25A ΔVout: 1.5% of Vout (27mV) for worst case load transient Vin, ripple 1.5% of Vin (180mV, p-p) Vout+ Vin+ VIN VOUT SENSE RTUNE MODULE + CI1 CI2 CO1 CTUNE ON/OFF TRIM Q3 RTrim GND CI1 10μF/16V ceramic capacitor (e.g. Murata GRM Series) CI2 47μF/16V bulk electrolytic CO1 2 x 47μF/6.3V ceramic capacitor (e.g. TDK C Series) CTune 4.7nF ceramic capacitor (can be 1206, 0805 or 0603 size) RTune 180 ohms SMT resistor (can be 1206, 0805 or 0603 size) RTrim 4.87kΩ SMT resistor (can be 1206, 0805 or 0603 size, recommended tolerance of 0.1%) May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 20 Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Mechanical Outline Dimensions are in millimeters and (inches). Tolerances: x.x mm ± 0.5 mm (x.xx in. ± 0.02 in.) [unless otherwise indicated] x.xx mm ± 0.25 mm (x.xxx in ± 0.010 in.) Solder Plating Thickness is PIN FUNCTION 1 ON/OFF 2 VIN 3 GND 4 VOUT 5 SENSE 6 TRIM 7 GND 8 NC 9 SEQ 10 PGOOD PIN 7 PIN 8 May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 21 GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Recommended Pad Layout Dimensions are in millimeters and (inches). Tolerances: x.x mm ± 0.5 mm (x.xx in. ± 0.02 in.) [unless otherwise indicated] x.xx mm ± 0.25 mm (x.xxx in ± 0.010 in.) PIN 8 PIN 7 PIN FUNCTION 1 ON/OFF 2 VIN 3 GND 4 VOUT 5 SENSE 6 TRIM 7 GND 8 NC 9 SEQ 10 PGOOD May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 22 Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Packaging Details TM The 12V PicoTLynx 3A modules are supplied in tape & reel as standard. Modules are shipped in quantities of 400 modules per reel. All Dimensions are in millimeters and (in inches). Reel Dimensions: Outside Dimensions: 330.2 mm (13.00”) Inside Dimensions: 177.8 mm (7.00”) Tape Width: 24.00 mm (0.945”) May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 23 Data Sheet GE TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current 300 Per J-STD-020 Rev. C Surface Mount Information Peak Temp 260°C 250 Pick and Place Cooling 200 TM Zone The 12V PicoTLynx 3A modules use an open frame * Min. Time Above 235°C 15 Seconds construction and are designed for a fully automated assembly 150 Heating Zone *Time Above 217°C process. The modules are fitted with a label designed to provide 1°C/Second 60 Seconds a large surface area for pick and place operations. The label 100 meets all the requirements for surface mount processing, as well as safety standards, and is able to withstand reflow 50 o temperatures of up to 300 C. The label also carries product information such as product code, serial number and the 0 Reflow Time (Seconds) location of manufacture. Figure 51. Recommended linear reflow profile using Nozzle Recommendations Sn/Ag/Cu solder. The module weight has been kept to a minimum by using open Post Solder Cleaning and Drying Considerations frame construction. Variables such as nozzle size, tip style, vacuum pressure and placement speed should be considered to Post solder cleaning is usually the final circuit-board optimize this process. The minimum recommended inside assembly process prior to electrical board testing. The nozzle diameter for reliable operation is 3mm. The maximum result of inadequate cleaning and drying can affect both nozzle outer diameter, which will safely fit within the allowable the reliability of a power module and the testability of the component spacing, is 7 mm. finished circuit-board assembly. For guidance on appropriate soldering, cleaning and drying procedures, Lead Free Soldering refer to Board Mounted Power Modules: Soldering and TM Cleaning Application Note (AN04-001). The 12V PicoTLynx 3A modules are lead-free (Pb-free) and RoHS compliant and fully compatible in a Pb-free soldering process. Failure to observe the instructions below may result in the failure of or cause damage to the modules and can adversely affect long-term reliability. Pb-free Reflow Profile Power Systems will comply with J-STD-020 Rev. C (Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices) for both Pb-free solder profiles and MSL classification procedures. This standard provides a recommended forced-air-convection reflow profile based on the volume and thickness of the package (table 4-2). The suggested Pb-free solder paste is Sn/Ag/Cu (SAC). The recommended linear reflow profile using Sn/Ag/Cu solder is shown in Fig. 51. Soldering outside of the recommended profile requires testing to verify results and performance. MSL Rating TM The 12V PicoTLynx 3A modules have a MSL rating of 2a. Storage and Handling The recommended storage environment and handling procedures for moisture-sensitive surface mount packages is detailed in J-STD-033 Rev. A (Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices). Moisture barrier bags (MBB) with desiccant are required for MSL ratings of 2 or greater. These sealed packages should not be broken until time of use. Once the original package is broken, the floor life of the product at conditions of ≤ 30°C and 60% relative humidity varies according to the MSL rating (see J-STD- 033A). The shelf life for dry packed SMT packages will be a minimum of 12 months from the bag seal date, when stored at the following conditions: < 40° C, < 90% relative humidity. May 2, 2013 ©2013 General Electric Company. All rights reserved. Page 24 Reflow Temp (°C) GE Data Sheet TM 12V PicoTLynx 3A: Non-Isolated DC-DC Power Modules 4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 3A Output Current Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table 6. Device Codes Input Output Output On/Off Device Code Sequencing Comcodes Voltage Range Voltage Current Logic APTS003A0X-SRZ 4.5 – 14Vdc 0.59 – 5.5Vdc 3A Negative Yes CC109125985 APTS003A0X4-SRZ 4.5 – 14Vdc 0.59 – 5.5Vdc 3A Positive Yes CC109125993 APTS003A0X-SRDZ 4.5 – 14Vdc 0.59 – 5.5Vdc 3A Negative Yes CC109150686 APXS003A0X-SRZ 4.5 – 14Vdc 0.59 – 5.5Vdc 3A Negative No CC109125952 APXS003A0X4-SRZ 4.5 – 14Vdc 0.59 – 5.5Vdc 3A Positive No CC109125977 APXS003A0X-25SRZ* 4.5 – 14Vdc 0.59 – 5.5Vdc 3A Negative No CC109142196 * Special codes, consult factory before ordering Table 7. Coding Scheme TLynx Sequencing Input Output Output On/Off Options ROHS family feature. voltage current voltage logic Compliance range AP T S 003A0 X 4 -SR -D Z T = with Seq. S = 4.5 - 3.0A X = 4 = S = Surface D = 105C Z = ROHS6 14V programmable positive Mount operating X = w/o Seq. output No entry = R = Tape&Reel ambient, 40G negative operating shock as per MIL Std 810F Contact Us For more information, call us at USA/Canada: +1 888 546 3243, or +1 972 244 9288 Asia-Pacific: +86.021.54279977*808 Europe, Middle-East and Africa: +49.89.74423-206 India: +91.80.28411633 www.ge.com/powerelectronics May 2, 2013 ©2013 General Electric Company. All rights reserved. Version 1.19

Related Products

GE CRITICAL POWER
ABXS002A3X41-SRZ - BOOSTLYNX
GE CRITICAL POWER
NON-ISOLATED DC/DC CONVERTERS 3A 2.4-5.5VIN .6-3.63VOUT POSLOGIC
GE CRITICAL POWER
NON-ISOLATED DC/DC CONVERTERS 2.4-5.5VIN 6A 0.6-3.63VOUT
GE CRITICAL POWER
NON-ISOLATED DC/DC CONVERTERS SMT IN 2.4-5.5VDC OUT 0.59-3.63VDC 6A
GE CRITICAL POWER
NON-ISOLATED DC/DC CONVERTERS 2.4-5.5VIN 12A SMT 0.6-3.63VOUT
GE CRITICAL POWER
NON-ISOLATED DC/DC CONVERTERS 20A 0.6-3.63VOUT NEGLOGIC SMT W/O SEQ

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on Electronics Finder are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

Electronics Finder is a GID Industrial website.
GID Industrial Logo
Copyright © 2024 GID Holdings LLC, All Rights Reserved.
Page generated in 0.088 seconds.