GE Critical Power APXW005A0X SERIES 5 Watt pol DC-DC Converter Data Sheet GE Measures: 0.8 x 0.45 x 0.335” TM 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current 1 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output ; 5A to 0.7A Scaled output current Features • Compliant to RoHS II EU “Directive 2011/65/EU” • Compatible in a Pb-free or SnPb reflow environment (Z versions) • Compliant to IPC-9592 (September 2008), Category 2, Class II • Extra Wide Input voltage range (9Vdc–36Vdc) • Output voltage programmable from 3Vdc to 18 Vdc via external resistor TM • Tunable Loop to optimize dynamic output voltage response RoHS Compliant • Patent Pending AutoLimit automatic scaling of current Applications limit with output voltage • Output overcurrent protection (non-latching) • Industrial equipment • Overtemperature protection • Distributed power architectures • Remote On/Off • Intermediate bus voltage applications • Remote Sense • Telecommunications equipment • Small size: 20.3 mm x 11.4 mm x 8.5 mm (0.8 in x 0.45 in x 0.335 in) • Wide operating temperature range [-40°C to Vin+ Vout+ VIN VOUT 105°C(Ruggedized: -D), 85°C(Regular)] SENSE nd † • UL* 60950-1, 2 Ed. Recognized, CSA C22.2 No. RTUNE ‡ nd 60950-1-07 Certified, and VDE (EN60950-1, 2 Ed.) MODULE Licensed Cin Co • ISO** 9001 and ISO 14001 certified manufacturing R CTUNE facilities ON/OFF TRIM Q1 RTrim GND Description TM The 9-36V ProLynx series of power modules are non-isolated dc-dc converters that can deliver up to 5A of output current. These modules operate over an extra wide range of input voltage (VIN = 9Vdc – 36Vdc) and provide a precisely regulated output voltage from 3Vdc to 18Vdc, programmable via an external resistor. Two new features added with this family of products are the ability to externally tune the voltage control loop and a variable current limit inversely dependent on output voltage. Other features include remote On/Off, adjustable output voltage, over current and over temperature protection. The Ruggedized version (-D) is capable of TM operation up to 105°C and withstand high levels of shock and vibration. The Tunable Loop , allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area and AutoLimit enables the module to deliver the max possible output power across the entire voltage range. The 9-36V ProLynx can also be used for negative output voltage loads through the use of a specific application schematic * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. ‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards 1 Output range linked to input voltage range see page 24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om September 16, 2014 ©2014 General Electric Company. All rights reserved. Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage All VIN -0.3 37 V Continuous Operating Ambient Temperature All TA -40 85 °C (see Thermal Considerations section) -D version TA -40 105 °C Storage Temperature All T -55 125 °C stg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 9 ⎯ 36 Vdc Maximum Input Current All IIN,max 5 Adc (V =9V to 36V, I =I) IN O O, max Input No Load Current (VIN = 28V, IO = 0, module enabled) VO,set = 3Vdc IIN,No load 26 mA (VIN = 28V, IO = 0, module enabled) VO,set = 18Vdc IIN,No load 50 mA Input Stand-by Current All IIN,stand-by 3 mA (VIN = 28Vdc, module disabled) 2 2 Inrush Transient All It 0.5 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN =0 to 36V, IO= All 95 mAp-p I ; See Test Configurations) Omax Input Ripple Rejection (120Hz) All -24 -45 -60 dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 8 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 2 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Electrical Specifications (continued) Parameter Device Symbol Min Typ Max Unit Output Voltage Set-point All V -2.0 +2.0 % V O, set O, set Output Voltage All V -2.5 ⎯ +2.5 % V O, set O, set (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range (elected by an external resistor) (Some output voltages may not be possible depending All VO 3 18 Vdc on the input voltage – see Feature Descriptions Section) Output Regulation Line (V =V to V) All 0.4 % V IN IN, min IN, max ⎯ O, set Load (IO=IO, min to IO, max) All ⎯ 0.4 % VO, set Temperature (Tref=TA, min to TA, max) All ⎯ 0.4 % VO, set Remote Sense Range All 0.5 Vdc Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max Co = 0.1μF // 10 μF ceramic capacitors) Vout=3.3V, Vin=28V Peak-to-Peak (5Hz to 20MHz bandwidth) All 45 mVpk-pk RMS (5Hz to 20MHz bandwidth) All 14 mVrms Vout=18V, Vin=28V Peak-to-Peak (5Hz to 20MHz bandwidth) All 143 mVpk-pk RMS (5Hz to 20MHz bandwidth) All 47 mVrms 1 External Capacitance TM Without the Tunable Loop ESR ≥ 1 mΩ All CO, max 0 ⎯ 47 μF ESR ≥ 10 mΩ All C 0 100 μF O, max ⎯ TM With the Tunable Loop ESR ≥ 0.15 mΩ All C 0 100 μF O, max ⎯ ESR ≥ 10 mΩ All CO, max 0 ⎯ 2000* μF Output Current (Vo=3V) All I 0 5 Adc o Vo=5V All Io 0 4.7 Adc Vo=12V All I 0 3.5 Adc o Vo=18V All Io 0 2.5 Adc Output Current Limit Inception (Hiccup Mode ) All I 160 % I O, lim o,max Output Short-Circuit Current 12Vin 25C All IO, s/c 2 Adc (VO≤250mV) ( Hiccup Mode ) 28Vin Efficiency (I =I V = V) O O, max , O O,set V = 12Vdc, T=25°C V = 3.3Vdc η 91.0 % IN A O, set V = 12Vdc, T=25°C V = 5Vdc η 93.3 % IN A O, set V = 28Vdc, T=25°C V = 12Vdc η 94.7 % IN A O,set VIN= 28Vdc, TA=25°C VO,set = 18Vdc η 95.9 % Switching Frequency All fsw ⎯ 300 ⎯ kHz 1 TM Depending on Input and Output Voltage, external capacitors require using the new Tunable Loop feature to ensure that the module is TM stable as well as getting the best transient response. See the Tunable Loop section for details. * Larger values may be possible at specific output voltages. Please consult your GE Technical representative for additional details. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Electrical Specifications (continued) Parameter Device Symbol Min Typ Max Unit Switching Frequency All fsw ⎯ 300 ⎯ kHz General Specifications Parameter Min Typ Max Unit Calculated MTBF (IO=0.8IO, max, TA=40°C) Telcordia Issue 2, Method 1, Case 17,822,788 Hours 3 Weight 3.49 (0.123) g (oz.) ⎯ ⎯ September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Feature Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. See Feature Descriptions for additional information. Parameter Device Symbol Min Typ Max Unit On/Off Signal Interface (V =V to V ; open collector or equivalent, IN IN, min IN, max Signal referenced to GND) Device is with suffix “4” – Positive Logic (See Ordering Information) Logic High (Module ON) Input High Current All IIH ⎯ 160 µA Input High Voltage All VIH 4.2 ⎯ 12 V Logic Low (Module OFF) Input Low Current All IIL ⎯ ⎯ 0.5 mA Input Low Voltage All VIL -0.3 ⎯ 3.3 V Device Code with no suffix – Negative Logic (See Ordering Information) Logic High (Module OFF) Input High Current All IIH — — 3 mA Input High Voltage All VIH 1.5 — 36 Vdc Logic Low (Module ON) Input low Current All IIL — — 220 μA Input Low Voltage All VIL -0.2 — 1 Vdc Turn-On Delay and Rise Times (VIN=VIN, nom, IO=IO, max , VO to within ±1% of steady state) Case 1: On/Off input is enabled and then input power is All Tdelay — 9 — msec applied (delay from instant at which V = V until Vo = IN IN, min 10% of Vo, set) Case 2: Input power is applied for at least one second and All Tdelay — 7 — msec then the On/Off input is enabled (delay from instant at which Von/Off is enabled until Vo = 10% of Vo, set) Output voltage Rise time (time for Vo to rise from All Trise — 8 — msec 10% of Vo, set to 90% of Vo, set) o Output voltage overshoot (TA = 25 C 3 % VO, set V = V to V ,I = I to I) IN IN, min IN, max O O, min O, max With or without maximum external capacitance Over Temperature Protection All T 130 °C ref (See Thermal Considerations section) Input Undervoltage Lockout Turn-on Threshold All 7.5 Vdc Turn-off Threshold All 7.35 Vdc Hysteresis All 0.15 Vdc September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 5 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Characteristic Curves TM o The following figures provide typical characteristics for the 9-36V ProTLynx 5A at 3.3Vo and at 25 C. 95 6 90 5 Vin=9V Standard Part (85°C) 85 Vin=28V Vin=36V 4 Ruggedized (D) Part (105°C) 80 Vin=12V 12Vin 28Vin NC 0.5m/s (100LFM) 3 75 1m/s (200LFM) 1.5m/s (300LFM) 2m/s(400LFM) 70 2 0 12 345 65 75 85 95 105 O OUTPUT CURRENT, IO (A) AMBIENT TEMPERATURE, TA C Figure 2. Derating Output Current versus Ambient Figure 1. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 4. Transient Response to Dynamic Load Change from Figure 3. Typical output ripple and noise (VIN = 28V, Io = 50% to 100% at 28Vin, Cext - 10uF ceramic + 330uF polymer, Io,max). CTune=10nF & RTune=150Ω TIME, t (5ms/div) TIME, t (5ms/div) Figure 6. Typical Start-up Using Input Voltage (VIN = 28V, Io = Figure 5. Typical Start-up Using On/Off Voltage (Io = Io,max). Io,max). September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE ON/OFF VOLTAGE OUTPUT VOLTAGE VO (V) (1V/div) VON/OFF (V) (5V/div) EFFICIENCY, η (%) V (V) (40mV/div) O OUTPUT CURRENT OUTPUT VOLTAGE OUTPUT VOLTAGE INPUT VOLTAGE I (A) (2Adiv) V (V) (20mV/div) O O OUTPUT CURRENT, Io (A) VO (V) (1V/div) VIN (V) (20V/div) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Characteristic Curves TM o The following figures provide typical characteristics for the 9-36V ProLynx 5A at 5Vo and at 25 C. (4.5A rated output) 100 6 95 5 90 Standard Part (85°C) 85 4 Ruggedized (D) Part (105°C) Vin=36V Vin=9V Vin=28V Vin=12V 12Vin 28Vin NC 80 0.5m/s (100LFM) 3 1m/s (200LFM) 75 1.5m/s (300LFM) 2m/s(400LFM) 70 2 01234 5 65 75 85 95 105 O OUTPUT CURRENT, IO (A) AMBIENT TEMPERATURE, TA C Figure 8. Derating Output Current versus Ambient Figure 7. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 10. Transient Response to Dynamic Load Change from Figure 9. Typical output ripple and noise (VIN = 28V, Io = 50% to 100% at 28Vin, Cext - 10uF ceramic + 330uF polymer, Io,max). CTune=10nF & RTune=150Ω TIME, t (5ms/div) TIME, t (5ms/div) Figure 12. Typical Start-up Using Input Voltage (VIN = 28V, Io = Figure 11. Typical Start-up Using On/Off Voltage (Io = Io,max). Io,max). September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 7 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE ON/OFF VOLTAGE OUTPUT VOLTAGE VO (V) (2V/div) VON/OFF (V) (5V/div) EFFICIENCY, η (%) VO (V) (40mV/div) OUTPUT CURRENT, OUTPUT VOLTAGE OUTPUT VOLTAGE INPUT VOLTAGE I (A) (2Adiv) V (V) (20mV/div) OUTPUT CURRENT, Io (A) O O V (V) (2V/div) V (V) (20V/div) O IN Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Characteristic Curves TM o The following figures provide typical characteristics for the 9-36V ProLynx 5A at 12Vo and at 25 C. (3.5A rated output) 100 4 95 Standard Part (85°C) 90 3 Vin=36V Vin=28V 85 Ruggedized (D) Part (105°C) Vin=18V 28Vin NC 80 2 0.5m/s (100LFM) 1m/s (200LFM) 75 1.5m/s (300LFM) 2m/s(400LFM) 70 1 00.5 11.5 22.5 33.5 65 75 85 95 105 O OUTPUT CURRENT, IO (A) AMBIENT TEMPERATURE, TA C Figure 14. Derating Output Current versus Ambient Figure 13. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 16. Transient Response to Dynamic Load Change from Figure 15. Typical output ripple and noise (VIN = 28V, Io = 50% to 100% at 28Vin, Cext - 3x10uF ceramic, CTune=470pF Io,max). & RTune=150Ω TIME, t (5ms/div) TIME, t (5ms/div) Figure 18. Typical Start-up Using Input Voltage (VIN = 28V, Io = Figure 17. Typical Start-up Using On/Off Voltage (Io = Io,max). Io,max). September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 8 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE ON/OFF VOLTAGE OUTPUT VOLTAGE EFFICIENCY, η (%) VO (V) (5V/div) VON/OFF (V) (5V/div) VO (V) (40mV/div) OUTPUT CURRENT, OUTPUT VOLTAGE OUTPUT VOLTAGE INPUT VOLTAGE IO (A) (2Adiv) VO (V) (100mV/div) OUTPUT CURRENT, Io (A) VO (V) (5V/div) VIN (V) (20V/div) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Characteristic Curves TM o The following figures provide typical characteristics for the 9-36V ProLynx 5A at 18Vo and at 25 C. (2.5A rated output) 3 100 Vin=24V Standard 95 Part (85°C) 2 90 Vin=36V 85 Vin=28V Ruggedized (D) Part (105°C) 28Vin NC 80 1 0.5m/s (100LFM) 1m/s (200LFM) 75 1.5m/s (300LFM) 2m/s(400LFM) 70 0 0 0.511.522.5 65 75 85 95 105 O OUTPUT CURRENT, IO (A) AMBIENT TEMPERATURE, TA C Figure 20. Derating Output Current versus Ambient Figure 19. Converter Efficiency versus Output Current. Temperature and Airflow. TIME, t (1μs/div) TIME, t (20μs /div) Figure 22. Transient Response to Dynamic Load Change Figure 21. Typical output ripple and noise (VIN = 28V, Io = Io,max). from 50% to 100% at 28Vin, Cext - 1x10uF ceramic, CTune=150pF & RTune=220Ω TIME, t (5ms/div) TIME, t (5ms/div) Figure 24. Typical Start-up Using Input Voltage (VIN = 28V, Io Figure 23. Typical Start-up Using On/Off Voltage (Io = Io,max). = Io,max). September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 9 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE ON/OFF VOLTAGE OUTPUT VOLTAGE VO (V) (5V/div) VON/OFF (V) (5V/div) EFFICIENCY, η (%) V (V) (40mV/div) O OUTPUT CURRENT, OUTPUT VOLTAGE OUTPUT VOLTAGE INPUT VOLTAGE OUTPUT CURRENT, Io (A) IO (A) (2Adiv) VO (V) (200mV/div) VO (V) (5V/div) VIN (V) (20V/div) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Test Configurations Design Considerations Input Filtering CURRENT PROBE TO OSCILLOSCOPE TM The 9-36V ProLynx module should be connected to a low L TEST ac-impedance source. A highly inductive source can affect V (+) IN the stability of the module. An input capacitance must be 1μH placed directly adjacent to the input pin of the module, to minimize input ripple voltage and ensure module stability. C IN CS 1000μF Electrolytic To minimize input voltage ripple, ceramic capacitors are 2x100μF E.S.R.<0.1 Ω Tantalum recommended at the input of the module. Figure 28 shows @ 20°C 100kHz the input ripple voltage for various output voltages at COM maximum load current with 2x10 µF or 3x10 µF ceramic capacitors and an input of 12V, while Fig. 29 shows the input NOTE: Measure input reflected ripple current with a simulated ripple for an input voltage of 28V. source inductance (LTEST) of 1μH. Capacitor CS offsets possible battery impedance. Measure current as shown above. 250 Figure 25. Input Reflected Ripple Current Test Setup. 225 COPPER STRIP 200 RESISTIVE Vo+ LOAD 175 0.1uF 10uF 150 2x10uF COM 125 SCOPE USING 3x10uF BNC SOCKET 100 GROUND PLANE 3 45678 NOTE: All voltage measurements to be taken at the module terminals, as shown above. If sockets are used then Output Voltage (Vdc) Kelvin connections are required at the module terminals to avoid measurement errors due to socket contact Figure 28. Input ripple voltage for various output voltages resistance. with 2x10 µF or 3x10 µF ceramic capacitors at the input Figure 26. Output Ripple and Noise Test Setup. (maximum load). Input voltage is 12V. R R R R distribution contact contact distribution V (+) V IN O 275 250 RLOAD V V 225 IN O 200 Rdistribution Rcontact Rcontact Rdistribution 175 COM COM 150 2x10uF NOTE: All voltage measurements to be taken at the module terminals, as shown above. If sockets are used then 125 Kelvin connections are required at the module terminals 3x10uF to avoid measurement errors due to socket contact 100 resistance. 3 5 7 9 11 13 15 17 Figure 27. Output Voltage and Efficiency Test Setup. Output Voltage (Vdc) V . I O O Figure 29. Input ripple voltage for various output voltages Efficiency η = x 100 % with 2x10 µF or 3x10 µF ceramic capacitors at the input V . I IN IN (maximum load). Input voltage is 28V. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 10 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om BATTERY Input Ripple Voltage (mVp-p) Input Ripple Voltage (mVp-p) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Output Filtering 170 TM 1x10uF The 9-36V ProLynx modules are designed for low output 150 ripple voltage and will meet the maximum output ripple 2x10uF specification with 0.1 µF ceramic and 10 µF ceramic 130 4x10uF capacitors at the output of the module. However, additional 110 output filtering may be required by the system designer for a number of reasons. First, there may be a need to further 90 reduce the output ripple and noise of the module. Second, the 70 dynamic response characteristics may need to be customized to a particular load step change. 50 To reduce the output ripple and improve the dynamic 30 response to a step load change, additional capacitance at the 10 output can be used. Low ESR polymer and ceramic capacitors 2 4 6 8 10 12 14 16 18 are recommended to improve the dynamic response of the Output Voltage(Volts) module. Figures 30 and 31 provide output ripple information for different external capacitance values at various Vo and for full load currents. For stable operation of the module, limit the Figure 31. Output ripple voltage for various output voltages capacitance to less than the maximum output capacitance as with external 1x10 µF, 2x10 µF or 4x10 µF ceramic capacitors specified in the electrical specification table. Optimal at the output (max. load). Input voltage is 28V. performance of the module can be achieved by using the TM Tunable Loop feature described later in this data sheet. Safety Considerations 50 For safety agency approval the power module must be 1x10uF installed in compliance with the spacing and separation requirements of the end-use safety agency standards, i.e., UL 40 2x10uF 60950-1 2nd, CSA C22.2 No. 60950-1-07, DIN EN 60950-1:2006 4x10uF + A11 (VDE0805 Teil 1 + A11):2009-11; EN 60950-1:2006 + 30 A11:2009-03. For the converter output to be considered meeting the requirements of safety extra-low voltage (SELV), the input must 20 meet SELV requirements. The power module has extra-low voltage (ELV) outputs when all inputs are ELV. The input to these units is to be provided with a fast-acting 10 fuse with a maximum rating of 8A in the positive input lead. 345678 Output Voltage(Volts) Figure 30. Output ripple voltage for various output voltages with external 1x10 µF, 2x10 µF or 4x10 µF ceramic capacitors at the output (max. load). Input voltage is 12V. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Ripple(mVp-p) Ripple(mVp-p) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Feature Descriptions MODULE Remote Enable D2 +5V TM The 9-36V ProLynx modules feature an On/Off pin for remote VIN+ On/Off operation. Two On/Off logic options are available. In 22K the Positive Logic On/Off option, (device code suffix “4” – see Rpullup Ordering Information), the module turns ON during a logic High ISS on the On/Off pin and turns OFF during a logic Low. With the 22K PWM Enable Negative Logic On/Off option, (no device code suffix, see I D1 ON/OFF Ordering Information), the module turns OFF during logic High ON/OFF Q2 + and ON during logic Low. The On/Off signal is always 22K V ON/OFF referenced to ground. CSS Q1 22K For positive logic modules, the circuit configuration for using GND _ the On/Off pin is shown in Figure 32. When the external transistor Q1 is in the OFF state, the ON/OFF pin is pulled high Figure 33. Circuit configuration for using negative On/Off and transistor Q2 is OFF leading to Q3 also being OFF which logic. turns the module ON. The external resistor Rpullup (100k recommended) must be sized so that VON/OFF is never more Overcurrent Protection than 12V when Q1 is OFF. In particular, if Vpullup is made the To provide protection in a fault (output overload) condition, the same as the input voltage Vin, the resistor Rpullup must be large unit is equipped with internal current-limiting circuitry and can enough so that V is never more than 12V. If the On/Off pin ON/OFF endure current limiting continuously. At the point of is left floating the module will be in the ON state. current-limit inception, the unit enters hiccup mode. The unit For negative logic On/Off modules, the circuit configuration is operates normally once the output current is brought back into shown in Fig. 33. When the external transistor Q1 is in the ON its specified range. The 9-36V ProLynx modules employ an state, the ON/OFF pin is pulled low causing transistor Q2 to be innovative, patent pending, ‘AutoLimit’ capability. This results in OFF and the module to be turned ON. To turn the module OFF, automatic scaling of current limit with output voltage through Q1 is turned OFF, causing the ON/OFF pin to be pulled high an inverse relationship of the current limit threshold with the turning Q2 ON and the module to be turned OFF. If the On/Off output voltage. This feature shown graphically in Fig. 34, allows pin is left floating, the module will be in the OFF state. higher output currents to be drawn from the module at lower output voltages thereby optimizing the power delivery Vpullup MODULE capability of the module. +5V 5.5 Rpullup 22K 5 ISS I ON/OFF 4.5 Q2 PWM Enable ON/OFF 22K 4 Q3 + 42K V 3.5 ON/OFF CSS Q1 22K 3 GND _ 2.5 Figure 32. Circuit configuration for using positive On/Off 2 logic. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Output Voltage (V) Figure 34. Graph showing maximum output current capability at different output voltages. Over Temperature Protection To provide protection in a fault condition, the unit is equipped with a thermal shutdown circuit. The unit will shutdown if the o overtemperature threshold of 130 C is exceeded at the thermal reference point Tref. The thermal shutdown is not intended as a guarantee that the unit will survive temperatures beyond its rating. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 12 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Output Current (A) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Once the unit goes into thermal shutdown it will then wait to By using a ±0.5% tolerance trim resistor with a TC of ±100ppm, cool before attempting to restart. a set point tolerance of ±1.5% can be achieved as specified in the electrical specification. Input Undervoltage Lockout Remote Sense At input voltages below the input undervoltage lockout limit, TM the module operation is disabled. The module will begin to The 9-36V ProLynx power modules have a Remote Sense operate at an input voltage above the undervoltage lockout feature to minimize the effects of distribution losses by turn-on threshold. regulating the voltage between the VS+ and Vo pin. The voltage between the VS+ pin and Vo pin should not exceed Output Voltage Programming 0.5V. TM The output voltage of the 9-36V ProLynx module can be programmed to any voltage from 3Vdc to 18Vdc by V (+) V (+) connecting a resistor between the Trim and GND pins of the IN O module. Certain restrictions apply on the output voltage set point depending on the input voltage. These are shown in the VS+ Output Voltage vs. Input Voltage Set Point Area plot in Fig. 35. ON/OFF LOAD TRIM Without an external resistor between Trim and GND pins, the output of the module will be 0.7Vdc. To calculate the value of R trim the trim resistor, Rtrim for a desired output voltage, use the following equation: GND  70  Rtrim= kΩ Figure 36. Circuit configuration for programming output   () Vo− 0.7   voltage using an external resistor. Rtrim is the external resistor in kΩ, and Vo is the desired output voltage. Voltage Margining 40 Output voltage margining can be implemented in the 9-36V TM ProLynx modules by connecting a resistor, R , from the 35 margin-up Trim pin to the ground pin for margining-up the output voltage 30 Upper Limit and by connecting a resistor, Rmargin-down, from the Trim pin to output pin for margining-down. Figure 37 shows the circuit 25 configuration for output voltage margining. The POL 20 Programming Tool, available at www.gecriticalpower.com under the Design Tools section, also calculates the values of 15 R and R for a specific output voltage and % margin-up margin-down Lower Limit margin Please consult your local GE technical representative 10 for additional details. 5 2 4 6 8 10 12 14 16 18 Vo Output Voltage (V) Rmargin-down Figure 35. Output Voltage vs. Input Voltage Set Point Area plot showing limits where the output voltage can be set for MODULE different input voltages. Q2 Table 1 provides Rtrim values required for some common output voltages. Trim Table 1 Rmargin-up Rtrim V (V) Rtrim (KΩ) O, set 3.3 26.92 Q1 5 16.27 6 13.20 GND 9 8.43 12 6.19 Figure 37. Circuit Configuration for margining Output 15 4.89 voltage 18 4.04 September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 13 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Input Voltage (v) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current TM Table 2. General recommended values of of RTUNE and CTUNE Tunable Loop for Vin=12V and various external ceramic capacitor TM The 9-36V ProLynx modules have a new feature that combinations. optimizes transient response of the module called Tunable Vo=5V TM Loop . Co 1x10μF 1x22μF 2x22μF 4x22μF 6x22μF External capacitors are usually added to the output of the R TUNE 330 270 270 220 180 module for two reasons: to reduce output ripple and noise (see C TUNE 680pF 1200pF 2700pF 4700pF 5600pF Figs 30 and 31) and to reduce output voltage deviations from the steady-state value in the presence of dynamic load current changes. Adding external capacitance however affects the Table 3. General recommended values of of R and C TUNE TUNE voltage control loop of the module, typically causing the loop for Vin=28V and various external ceramic capacitor to slow down with sluggish response. Larger values of external combinations. capacitance could also cause the module to become unstable. Vo=5V TM The Tunable Loop allows the user to externally adjust the Co 1x10μF 1x22μF 2x22μF 4x22μF 6x22μF voltage control loop to match the filter network connected to TM RTUNE 330 220 220 150 150 the output of the module. The Tunable Loop is implemented by connecting a series R-C between the SENSE and TRIM pins C 220pF 390pF 680pF 1000pF 1800pF TUNE of the module, as shown in Fig. 38. This R-C allows the user to externally adjust the voltage loop feedback compensation of Vo=12V the module. Co 1x10μF 1x22μF 2x22μF 4x22μF 6x22μF Recommended values of R and C for different output TUNE TUNE RTUNE 330 330 270 270 180 capacitor combinations are given in Tables 2, 3 and 4. Tables 2 CTUNE 120pF 470pF 1000pF 1800pF 2700pF and 3 show recommended values of R and C for TUNE TUNE different values of ceramic output capacitors up to 100μF that might be needed for an application to meet output ripple and Table 4. Recommended values of R and C to obtain TUNE TUNE noise requirements. Selecting RTUNE and CTUNE according to transient deviation of 2% of Vout for a 50% of full load step. Tables 2 and 3 will ensure stable operation of the module Vin 12V 28V Vo 3.3V 5V 3.3V 5V 12V 18V In applications with tight output voltage limits in the presence of dynamic current loading, additional output capacitance will ∆I 2.5A 2.35A 2.5A 2.35A 1.75A 1.5A be required. Table 4 lists recommended values of R and TUNE 1x330μF 1x330μF 1x330μF 1x330μF C in order to meet 2% output voltage deviation limits for TUNE Co 2x22μF 1x22μF OsCon OsCon OsCon OsCon some common output voltages in the presence of a 50% of full load step change with an input voltage of 12 or 28V. R 180 180 180 220 270 330 TUNE CTUNE 22nF 22nF 6800pF 6.8nF 470pF 47pF VOUT 39mV 37mV 36mV 34mV 220mV310mV ΔV SENSE RTUNE C O MODULE CTUNE TRIM RTrim GND Figure. 38. Circuit diagram showing connection of R and TUME C to tune the control loop of the module. TUNE Please contact your GE technical representative to obtain more details of this feature as well as for guidelines on how to select the right value of external R-C to tune the module for best transient performance and stable operation for other output capacitance values or input voltages other than 12 / 28V. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Thermal Considerations Power modules operate in a variety of thermal environments; however, sufficient cooling should always be provided to help The thermal reference points, T used in the specifications are ref ensure reliable operation. also shown in Figure 40. For reliable operation the o temperatures at these points should not exceed 115 C. The Considerations include ambient temperature, airflow, module output power of the module should not exceed the rated power dissipation, and the need for increased reliability. A power of the module (Vo,set x Io,max). reduction in the operating temperature of the module will result in an increase in reliability. The thermal data presented Please refer to the Application Note “Thermal Characterization here is based on physical measurements taken in a wind Process For Open-Frame Board-Mounted Power Modules” for a tunnel. The test set-up is shown in Figure 39. The preferred detailed discussion of thermal aspects including maximum airflow direction for the module is in Figure 40. The derating device temperatures. data applies to airflow in either direction of the module’s short axis. 25.4_ Wind Tunnel (1.0) PWBs Power Module 76.2_ (3.0) x Probe Location Figure 40. Preferred airflow direction and location of hot- for measuring 12.7_ spot of the module (Tref). airflow and (0.50) ambient temperature Air flow Figure 39. Thermal Test Setup. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 15 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Shock and Vibration The ruggedized (-D version) of the modules are designed to withstand elevated levels of shock and vibration to be able to operate in harsh environments. The ruggedized modules have been successfully tested to the following conditions: Non operating random vibration: Random vibration tests conducted at 25C, 10 to 2000Hz, for 30 minutes each level, starting from 30Grms (Z axis) and up to 50Grms (Z axis). The units were then subjected to two more tests of 50Grms at 30 minutes each for a total of 90 minutes. Operating shock to 40G per Mil Std. 810F, Method 516.4 Procedure I: The modules were tested in opposing directions along each of three orthogonal axes, with waveform and amplitude of the shock impulse characteristics as follows: All shocks were half sine pulses, 11 milliseconds (ms) in duration in all 3 axes. Units were tested to the Functional Shock Test of MIL-STD-810, Method 516.4, Procedure I - Figure 516.4-4. A shock magnitude of 40G was utilized. The operational units were subjected to three shocks in each direction along three axes for a total of eighteen shocks. Operating vibration per Mil Std 810F, Method 514.5 Procedure I: The ruggedized (-D version) modules are designed and tested to vibration levels as outlined in MIL-STD-810F, Method 514.5, and Procedure 1, using the Power Spectral Density (PSD) profiles as shown in Table 1 and Table 2 for all axes. Full compliance with performance specifications was required during the performance test. No damage was allowed to the module and full compliance to performance specifications was required when the endurance environment was removed. The module was tested per MIL-STD-810, Method 514.5, Procedure I, for functional (performance) and endurance random vibration using the performance and endurance levels shown in Table 5 and Table 6 for all axes. The performance test has been split, with one half accomplished before the endurance test and one half after the endurance test (in each axis). The duration of the performance test was at least 16 minutes total per axis and at least 120 minutes total per axis for the endurance test. The endurance test period was 2 hours minimum per axis. Table 5: Performance Vibration Qualification - All Axes Frequency PSD Level Frequency PSD Level Frequency PSD Level (Hz) (G2/Hz) (Hz) (G2/Hz) (Hz) (G2/Hz) 10 1.14E-03 170 2.54E-03 690 1.03E-03 30 5.96E-03 230 3.70E-03 800 7.29E-03 40 9.53E-04 290 7.99E-04 890 1.00E-03 50 2.08E-03 340 1.12E-02 1070 2.67E-03 90 2.08E-03 370 1.12E-02 1240 1.08E-03 110 7.05E-04 430 8.84E-04 1550 2.54E-03 130 5.00E-03 490 1.54E-03 1780 2.88E-03 140 8.20E-04 560 5.62E-04 2000 5.62E-04 Table 6: Endurance Vibration Qualification - All Axes Frequency PSD Level Frequency PSD Level Frequency PSD Level (Hz) (G2/Hz) (Hz) (G2/Hz) (Hz) (G2/Hz) 10 0.00803 170 0.01795 690 0.00727 30 0.04216 230 0.02616 800 0.05155 40 0.00674 290 0.00565 890 0.00709 50 0.01468 340 0.07901 1070 0.01887 90 0.01468 370 0.07901 1240 0.00764 110 0.00498 430 0.00625 1550 0.01795 130 0.03536 490 0.01086 1780 0.02035 140 0.0058 560 0.00398 2000 0.00398 September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 16 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Example Application Circuit Requirements: Vin: 28V Vout: 12V Iout: 2.6A max., worst case load transient is from 1.75A to 2.6A ΔVout: 1.5% of Vout (180mV) for worst case load transient Vin, ripple 1.5% of Vin (420mV, p-p) Vout+ Vin+ VIN VOUT SENSE RTUNE 100K CI3 CO3 CO2 CO1 + MODULE + CI2 CI1 CTUNE ON/OFF TRIM Q1 RTrim GND CI1 1 x 0.01μF/50V, 0603 ceramic capacitor CI2 2 x 10μF/50V ceramic capacitor (e.g. Murata GRM32ER71H106K) CI3 47μF/63V bulk electrolytic CO1 1 x 0.01μF/25V, 0306 ceramic capacitor (e.g. Murata LLL185R71E103MA01L)) CO2 2 x 10μF/25V ceramic capacitor (e.g. Murata GCM32ER71E106KA42) CO3 NA CTune 470pF ceramic capacitor (can be 1206, 0805 or 0603 size) RTune 150 ohms SMT resistor (can be 1206, 0805 or 0603 size) RTrim 6.19KΩ resistor September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 17 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Mechanical Outline Dimensions are in millimeters and (inches). Tolerances: x.x mm ± 0.5 mm (x.xx in. ± 0.02 in.) [unless otherwise indicated] x.xx mm ± 0.25 mm (x.xxx in ± 0.010 in.) September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Recommended Pad Layout Dimensions are in millimeters and (inches). Tolerances: x.x mm ± 0.5 mm (x.xx in. ± 0.02 in.) [unless otherwise indicated] x.xx mm ± 0.25 mm (x.xxx in ± 0.010 in.) PIN FUNCTION 1 ON/OFF 2 VIN 3 GND 4 TRIM 5 VOUT 6 VS+ September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 19 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Packaging Details TM The 9-36V ProLynx modules are supplied in tape & reel as standard. Modules are shipped in quantities of 250 modules per reel. All Dimensions are in millimeters and (in inches). Reel Dimensions: Outside Dimensions: 330.2 mm (13.00) Inside Dimensions: 177.8 mm (7.00”) Tape Width: 44.00 mm (1.732”) September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 20 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Storage and Handling Surface Mount Information The recommended storage environment and handling Pick and Place procedures for moisture-sensitive surface mount packages is TM detailed in J-STD-033 Rev. A (Handling, Packing, Shipping and The 9-36V ProLynx modules use an open frame Use of Moisture/Reflow Sensitive Surface Mount Devices). construction and are designed for a fully automated Moisture barrier bags (MBB) with desiccant are required for assembly process. The modules are fitted with a label MSL ratings of 2 or greater. These sealed packages should not designed to provide a large surface area for pick and place be broken until time of use. Once the original package is operations. The label meets all the requirements for surface broken, the floor life of the product at conditions of ≤ 30°C and mount processing, as well as safety standards, and is able to o 60% relative humidity varies according to the MSL rating (see withstand reflow temperatures of up to 300 C. The label also J-STD-033A). The shelf life for dry packed SMT packages will carries product information such as product code, serial be a minimum of 12 months from the bag seal date, when number and the location of manufacture. stored at the following conditions: < 40° C, < 90% relative Nozzle Recommendations humidity. 300 The module weight has been kept to a minimum by using Per J-STD-020 Rev. C open frame construction. Variables such as nozzle size, tip Peak Temp 260°C 250 style, vacuum pressure and placement speed should be considered to optimize this process. The minimum Cooling 200 Zone recommended inside nozzle diameter for reliable operation is * Min. Time Above 235°C 3mm. The maximum nozzle outer diameter, which will safely 15 Seconds 150 Heating Zone fit within the allowable component spacing, is 7 mm. *Time Above 217°C 1°C/Second 60 Seconds 100 Bottom Side / First Side Assembly 50 This module is not recommended for assembly on the bottom side of a customer board. If such an assembly is attempted, 0 components may fall off the module during the second reflow Reflow Time (Seconds) process. Figure 41. Recommended linear reflow profile using Lead Free Soldering Sn/Ag/Cu solder. TM The 9-36V ProLynx modules are lead-free (Pb-free) and Post Solder Cleaning and Drying Considerations RoHS compliant and fully compatible in a Pb-free soldering process. Failure to observe the instructions below may result Post solder cleaning is usually the final circuit-board assembly in the failure of or cause damage to the modules and can process prior to electrical board testing. The result of adversely affect long-term reliability. inadequate cleaning and drying can affect both the reliability of a power module and the testability of the finished Pb-free Reflow Profile circuit-board assembly. For guidance on appropriate soldering, Power Systems will comply with J-STD-020 Rev. C cleaning and drying procedures, refer to Board Mounted Power (Moisture/Reflow Sensitivity Classification for Nonhermetic Modules: Soldering and Cleaning Application Note (AN04-001). Solid State Surface Mount Devices) for both Pb-free solder profiles and MSL classification procedures. This standard provides a recommended forced-air-convection reflow profile based on the volume and thickness of the package (table 4-2). The suggested Pb-free solder paste is Sn/Ag/Cu (SAC). The recommended linear reflow profile using Sn/Ag/Cu solder is shown in Fig. 41. Soldering outside of the recommended profile requires testing to verify results and performance. For questions regarding Land grid array(LGA) soldering, solder volume; please contact GE for special manufacturing process instructions. MSL Rating TM The 9-36V ProLynx modules have a MSL rating of 2a. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 21 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Reflow Temp (°C) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current EMC Considerations The circuit and plots in Figure 42 shows a suggested configuration to meet the radiated emission limits of EN55022 Class A. Actual performance depends on layout and external components used. CI1 1 x 0.01μF/50V, 0603 ceramic capacitor CI2 2 x 10μF/50V ceramic capacitor (e.g. Murata GRM32ER71H106K) CO1 1 x 0.01μF/25V, 0306 ceramic capacitor (e.g. Murata LLL185R71E103MA01L)) CO2 2 x 10μF/25V ceramic capacitor (e.g. Murata GCM32ER71E106KA42) RTrim 6.19KΩ resistor EUT: APXW005A0X3-SRZ / TEM Cell Level [dBµV/m] 80 70 60 50 40 30 20 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Frequency [Hz] MES RE0522121823_pre PK LIM EN 55022B F QP Electric Field QP Limit Fig 42 – EMI Plot of APXW005 on evaluation board with 12 V in @ 1.8 A in / 5 Vdc @ 4 A out September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 22 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Level [dBµV/m] 80 70 60 50 40 30 20 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Frequency [Hz] MES RE0522121837_pre PK LIM EN 55022B F QP Electric Field QP Limit Fig 43 – EMI Plot of APXW005 on evaluation board with 24 V in @ 0.9 A in / 5 Vdc @ 4 A out September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 23 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current OFF, which turns Q1 OFF causing the ON/OFF pin to be pulled Negative Output Operation high turning Q5 ON and the module to be turned OFF. If the Basic Scheme On/Off pin is left floating, the module will be in the OFF state. TM The 9-36V ProLynx modules can also be used to create Input Voltage Range negative output voltages from a positive input voltage. TM The 9-36V ProLynx modules when connected in a negative Changing the input connection to as shown in Figure 44 converts the module from a synchronous buck converter to a output application will support a maximum input voltage synchronous flyback converter which is also a function of the output voltage. The sum of the applied input voltage and magnitude of the output voltage cannot exceed 36V. Vin(applied) +|Vout| ≤ 36 and Vout≤-3V. For e.g. with a -12V output system the max input voltage that can applied is only 24V. However, Figure 35 showing variation of output voltage with Input Voltage should still be considered for determining the required minimum input voltage. Input voltage turn-on threshold remains the same as the positive output connection. However the input turn-off threshold tracks the output voltage and is reduced by the same level. The listed input Turn-Off threshold of 7.35V when applied to a -3.3Vout application will be measured as a 4.05V (7.35V – 3.3V) threshold. Operating at input voltages below 9V may cause the module to shut down earlier due to OCP inception Figure 44. Schematic Connection of 5A ProLynx module for Output Voltage Range negative output applications. TM The 9-36V ProLynx modules will support the values of trim resistors indicated in Table 1 to generate the same output voltage, except with sign inversion. For an output voltage of Remote Enable 12V or higher the maximum input voltage will have to be Figures 33 and 34 still apply for remote On/Off operation. proportionally reduced from 24Vin so that the sum of the However the On/Off threshold is now with respect to –Vout magnitudes does not exceed 36V instead of Ground. Before the module turns on, output is zero so GND and –Vout are at the same potential. After the module turns on, -Vout moves down and so will the ON/OFF Overcurrent Protection threshold. The following level shifting circuit can be used in applications to limit exposure of the negative output voltage The 9-36V ProLynx modules will automatically scale current to the On/Off circuitry. limit with output voltage through an inverse relationship of the current limit threshold even in negative output voltage mode. MODULE This feature is shown graphically in Fig. 46, allows higher output currents to be drawn from the module at lower output D4 +5V voltages thereby optimizing the power delivery capability of the module. 22K ISS1 22K PWM Enable Q2 I ENABLE D3 ON/OFF Q5 ON/OFF + R1 22K CSS1 Q1 22K 10K V ON/OFF R2 - GND Figure 45. On/Off Level Shifting Circuit for the 5A ProLynx module for negative output applications. Instead of directly turning Q1 On, the level shifting circuit is used to turn Q1 On by first turning Q2 ON. When Q1 is in the ON state, the ON/OFF pin is pulled low causing transistor Q5 Figure 46. Graph showing maximum output current to be OFF and the module to be turned ON. Both Q1 and Q2 capability at different output voltages. are external transistors. To turn the module OFF, Q2 is turned September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Efficiency 9-36V ProLynx modules in a negative output application -3.3Vout and at 25°C -12Vout and at 25°C 95 95 90 90 Vin=12V Vin=24V 85 85 Vin=12V Vin=9V Vin=9V Vin=24V 80 80 75 75 70 70 012 345 0 0.5 1 1.5 2 OUTPUT CURRENT, I (A) OUTPUT CURRENT, IO (A) O Figure 47. Converter Efficiency versus Output Current. Figure 49. Converter Efficiency versus Output Current. -5Vout and at 25°C -18Vout and at 25°C 95 95 Vin=9V 90 90 Vin=18V 85 Vin=12V 85 Vin=12V Vin=24V Vin=9V 80 80 75 75 70 70 00.511.522.533.544.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 OUTPUT CURRENT, IO (A) OUTPUT CURRENT, I (A) O Figure 48. Converter Efficiency versus Output Current. Figure 50. Converter Efficiency versus Output Current. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 25 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om EFFICIENCY, η (%) EFFICIENCY, η (%) EFFICIENCY, η (%) EFFICIENCY, η (%) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current 24Vin, -3.3Vout Thermal Thermal Derating curves for some of the output voltage settings when the 9-36V ProLynx modules are connected in a negative output application. De-rating curves for -3.3Vout, - 5Vout, -12Vout and -18Vout have been provided for input voltages of 9Vin, 12Vin and 24Vin. Intermediate voltages can be estimated through extrapolation of provided data 9Vin, -3.3Vout O AMBIENT TEMPERATURE, T C A Figure 53. Derating Output Current versus Ambient Temperature and Airflow. 9Vin, -5Vout O AMBIENT TEMPERATURE, TA C Figure 51. Derating Output Current versus Ambient Temperature and Airflow. 12Vin, -3.3Vout O AMBIENT TEMPERATURE, T C A Figure 54. Derating Output Current versus Ambient Temperature and Airflow. 12Vin, -5Vout O AMBIENT TEMPERATURE, T C A Figure 52. Derating Output Current versus Ambient Temperature and Airflow. O AMBIENT TEMPERATURE, TA C Figure 55. Derating Output Current versus Ambient Temperature and Airflow. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 26 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current 24Vin, -5Vout 24Vin, -12Vout O O AMBIENT TEMPERATURE, TA C AMBIENT TEMPERATURE, TA C Figure 56. Derating Output Current versus Ambient Figure 59. Derating Output Current versus Ambient Temperature and Airflow. Temperature and Airflow. 9Vin, -12Vout 9Vin, -18Vout O O AMBIENT TEMPERATURE, TA C AMBIENT TEMPERATURE, TA C Figure 57. Derating Output Current versus Ambient Figure 60. Derating Output Current versus Ambient Temperature and Airflow. Temperature and Airflow. 12Vin, -12Vout 12Vin, -18Vout O O AMBIENT TEMPERATURE, T C AMBIENT TEMPERATURE, T C A A Figure 58. Derating Output Current versus Ambient Figure 61. Derating Output Current versus Ambient Temperature and Airflow. Temperature and Airflow. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 27 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) OUTPUT CURRENT, Io (A) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current 18Vin, -18Vout O AMBIENT TEMPERATURE, TA C Figure 62. Derating Output Current versus Ambient Temperature and Airflow. September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 28 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om OUTPUT CURRENT, Io (A) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Input Ripple Input ripple curves have been provided for input voltages of 9Vin, 12Vin and 18Vin/24Vin. Ripple at intermediate input voltages can be estimated through extrapolation of provided curves 18Vin(-12Vo to -18Vo) / 24Vin(-3.3Vo to -12Vo) 9Vin 400 350 1x10uF 2x10uF 350 300 300 250 1x10uF 2x10uF 250 200 200 150 150 100 -18 -16 -14 -12 -10 -8 -6 -4 -18 -16 -14 -12 -10 -8 -6 -4 Output Voltage (Vdc) Output Voltage (Vdc) Figure 65. Input ripple voltage with 1x10 µF or 2x10 µF input Figure 63. Input ripple voltage with 1x10 µF or 2x10 µF ceramic capacitors (max load). ceramic capacitors at the input (max load). 12Vin 350 1x10uF 2x10uF 300 250 200 150 100 -18 -16 -14 -12 -10 -8 -6 -4 Output Voltage (Vdc) Figure 64. Input ripple voltage with 1x10 µF or 2x10 µF ceramic capacitors at the input (max load). September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 29 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Input Ripple Voltage (mVp-p) Input Ripple Voltage (mVp-p) Input Ripple Voltage (mVp-p) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Output Ripple 12Vin Output ripple curves for input voltages of 9Vin, 12Vin and 24Vin 200 1x10uF Ripple at intermediate input voltages can be estimated 175 2x10uF through extrapolation. Output Voltage is also roughly 4x10uF proportional to load current level. 150 Table 7. Peak to Peak Ripple in mV with a 10uF external 125 capacitor at different load levels 100 -3.3Vout 0.1A 50%Load 100%Load 75 9Vin 23 103 (1.75A) 174 12Vin 26 109 (1.9A) 177 50 -18 -16 -14 -12 -10 -8 -6 -4 24Vin 36 134 (2.5A) 214 Output Voltage (Vdc) -5Vout Figure 67. Output ripple with 1x10µF, 2x10µF or 4x10µF 0.1A 50%Load 100%Load output ceramic capacitors (max load). 9Vin 27 114 (1.35A) 196 12Vin 31 115 (1.55A) 195 24Vin 40 127 (2.2A) 217 18Vin(-12Vo to -18Vo) / 24Vin(-3.3Vo to -12Vo) 225 -12Vout 0.1A 50%Load 100%Load 200 1x10uF 9Vin 35 108 (0.65A) 195 2x10uF 12Vin 44 107 (0.8A) 206 175 4x10uF 24Vin 74 114 (1.25A) 217 150 -18Vout 0.1A 50%Load 100%Load 125 9Vin 43 77 (0.35A) 165 100 12Vin 53 80 (0.45A) 165 18Vin 76 122 (0.55A) 210 75 -18 -16 -14 -12 -10 -8 -6 -4 Output Voltage (Vdc) 9Vin Figure 68. Output ripple with 1x10µF, 2x10µF or 4x10µF output ceramic capacitors (max load). 200 1x10uF 175 2x10uF 4x10uF 150 125 100 75 50 -18 -16 -14 -12 -10 -8 -6 -4 Output Voltage (Vdc) Figure 66. Output ripple with 1x10µF, 2x10µF or 4x10µF output ceramic capacitors (max load). September 16, 2014 ©2014 General Electric Company. All rights reserved. Page 30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Output Ripple Voltage (mVp-p) Output Ripple Voltage (mVp-p) Output Ripple Voltage (mVp-p) Data Sheet GE GE Critical Power TM APXW005A0X SERIES 9-36V ProLynx 5A: Non-Isolated DC-DC Power Modules 5 Watt pol DC-DC Converter 9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current Measures: 0.8 x 0.45 x 0.335” 9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table 8. Device Codes Input Output Output On/Off Connector Device Code Comcodes Voltage Range Voltage Current Logic Type 5A – 2.5A or APXW005A0X3-SRZ Negative SMT CC109151916 9 – 36Vdc or 3 – 18Vdc or 5A – 0.7A in 9 – 24Vdc in -3.3 to -18Vdc in APXW005A0X43-SRZ negative Positive SMT CC109151908 negative output negative output output application application APXW005A0X3-SRDZ Negative SMT CC109168852 application -Z refers to RoHS compliant parts Table 9. Coding Scheme TLynx Sequencing Input Output Output On/Off Remote Options ROHS family feature. voltage current voltage logic Sense Compliance range AP X W 005 X 4 3 -SR -D Z X = w/o Seq. W = 9- 5A X = 4 = positive Available S = Surface D = 105°C Z = ROHS6 36V programmable Mount operating output R = Tape & ambient, 40G No entry = Reel operating negative shock as per MIL Std 810F Contact Us For more information, call us at USA/Canada: +1 888 546 3243, or +1 972 244 9288 Asia-Pacific: +86.021.54279977*808 Europe, Middle-East and Africa: +49.89.878067-280 India: +91.80.28411633 www.gecriticalpower.com GE Critical Power reserves the right to make changes to the product(s) or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. September 16, 2014 ©2014 General Electric Company. All International rights reserved. Version 1.27 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/ge-energy-APXW005A0X-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om