Data Sheet GE JNCW016A0R Orca* Series; DC-DC Converter Power Modules 36–75 Vdc Input; 28Vdc Output; 16Adc Output Features RoHS Compliant  Compliant to RoHS II EU Directive 2011/65/EC (-Z versions)  Compliant to REACH Directive (EC) No 1907/2006 3  High power density: 166 W/in  Very high efficiency: >93.5% Typ at Full Load  Industry standard half-brick pin-out  Low output ripple and noise  Industry standard, DOSA compliant half-brick footprint 57.7mm x 60.7mm x 12.7mm (2.27” x 2.39” x 0.5”)  Remote Sense  Supports repetitive loads (AC+DC) up to 2 kHz  2:1 input voltage range  Single tightly regulated output  Constant switching frequency Applications  Constant Current Overcurrent limit  RF Power Amplifier  Latch after short circuit fault shutdown  Wireless Networks  Over temperature protection auto restart  Switching Networks  Output voltage adjustment trim, 16.0Vdc to 35.2Vdc  Wide operating case temperature range (-40°C to 100°C) §  CE mark meets 2006/95/EC directives # †  ANSI/UL 60950-1, 2nd Ed. Recognized, CSA C22.2 No. 60950- Options ‡ 1-07 Certified, and VDE 0805-1 (EN60950-1, 2nd Ed.) Licensed  Negative On/Off Logic (factory preferred) **  ISO 9001 and ISO 14001 certified manufacturing facilities  Output OCP/OVP auto restart (factory preferred)  Compliant to IPC-9592A, Category 2, Class II  Shorter pins  Unthreaded heatsink holes Description The JNCW016A0R ORCA series of dc-dc converters are a new generation of isolated, very high efficiency DC/DC power modules providing up to up to 16Adc output current at a nominal output voltage of 28Vdc in an industry standard, DOSA compliant half- brick size footprint, which makes it an ideal choice for high voltage and high power applications. Threaded-through holes are provided to allow easy mounting or addition of a heatsink for high-temperature applications. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. * Trademark of General Electric Company # UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. ‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards January 27, 2015 ©2012 General Electric Company. All rights reserved. Page 1 Data Sheet GE JNCW016A0R Orca Series; DC-DC Converter Power Modules 36–75 Vdc Input; 28.0Vdc Output; 16Adc Output Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage Continuous All VIN -0.3 80 Vdc Transient, operational (≤100 ms) All VIN,trans -0.3 100 Vdc Operating Ambient Temperature All Ta -40 85 °C Operating Case Temperature All Tc -40 100 °C (See Thermal Considerations section, Figure 17) Storage Temperature All Tstg -55 125 °C I/O Isolation Voltage: Input to Case, Input to Output All 1500 V   dc Output to Case All 500 V   dc Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All VIN 36 48 75 Vdc (see Figure 12 for V when using trim-up feature) IN MIN Maximum Input Current (V =36V to 75V, I =I) All I 14.0 A IN O O, max IN,max dc 2 2 Inrush Transient All It 2 A s Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 12μH source impedance; V =0V to 75V, I = I ; All 20 mA IN O Omax p-p see Figure 7) Input Ripple Rejection (120Hz) All 50 dB CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to being an integrated part of complex power architecture. To preserve maximum flexibility, internal fusing is not included. Always use an input line fuse, to achieve maximum safety and system protection. The safety agencies require a time-delay or fast-acting fuse with a maximum rating of 25 A in the ungrounded input connection (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. January 27, 2015 ©2012 General Electric Company. All rights reserved. Page 2 Data Sheet GE JNCW016A0R Orca Series; DC-DC Converter Power Modules 36–75 Vdc Input; 28.0Vdc Output; 16Adc Output Electrical Specifications (continued) Parameter Device Symbol Min Typ Max Unit Output Voltage Set-point All V 27.5 28 28.5 V O, set dc (V =V , I =I , T =25°C) IN IN,nom O O, max c Output Voltage Set-Point Total Tolerance (Over all operating input voltage, resistive load, and temperature All V 27.0 29.0 V O  dc conditions until end of life) Output Regulation Line (V =V to V) All 0.1 0.2 %V IN IN, min IN, max  o,set Load (I =I to I) All 0.1 0.2 %V O O, min O, max  o,set Temperature (Tc = -40ºC to +100ºC) All   0.02 %/°C Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max) RMS (5Hz to 20MHz bandwidth) All  45 55 mVrms Peak-to-Peak (5Hz to 20MHz bandwidth) All  190 200 mVpk-pk External Capacitance All C 440 6500 μF O Output Power (V =28V to 35.2V) All P 450 W o O,max   Output Current All I 0 16.0 A o dc Output Current Limit Inception (Constant current until V