Manufacturers
GENERAL DEVICES CLB-305-22-CM7
Description
Full Extension, Quick Disconnect Ball Bearing Slide
CLB-305-22-CM7
Part Number
CLB-305-22-CM7
Price
Request Quote
Manufacturer
GENERAL DEVICES
Lead Time
Request Quote
Category
Thermal Management » Misc Products
Specifications
Manufacturer
General Devices
Manufacturers Part #
CLB-305-22-CM7
Industry Aliases
CLB-305-22-CM7
Sub-Categories
Miscellaneous Tools and Supplies
Factory Pack Quantity
1
Datasheet
Extracted Text
CLB-305 Slide Full Extension, Quick Disconnect Ball Bearing Slide TO ORDER, SPECIFY CLB-305 - - - Length (Dim. A) AR - Automatic Release (non-locking) Cabinet mounting selection if required. CLB-305 slide is designed to have .38 Sliding Enter CM and # of appropriate bracket. See page 48 for details on brackets available Thickness. See Note #5. Notes 1. CLB-305 consists of one set of two non-handed 4. Slide members are made from 14 gauge (.074) of the slide (chassis section). Load slides. work hardened cold rolled steel. capacities have a 100% (static load) 5. Slide is designed to allow stationary section 2. All slides are supplied with special (.094” max. safety factor at full extension. head height) #8-32x3/8 Phillips pan head to be mounted between the cabinet mounting The slides will support more than the screws and self-locking nuts for mounting one rails to take advantage of the .38” sliding stated capacities but are not designed to set of slides. Use only these special screws thickness. Recommended slide length is 1.0” be operated at capacities greater than when mounting through slide member to less than the rail setting. those stated. 6. Finish: clear zinc commercial plating. prevent internal damage to ball retainer. 9. Grease applied to ball bearing slides 7. Holes other than those shown may be in part at If mounting to cabinet rails, see cabinet has a temperature range of –45ºF to mounting section for ball bearing slides. manufacture’s option. +350ºF, however, due to the use of 8. Load capacity is based on one set of slides at 3. CLB-305 has a front disconnect feature and plastic guide and support balls, the locks at full extension. For non-locking, see full extension with load (center of gravity) slide is designed for applications not “order” chart. centered between the slides and at midpoint exceeding 150ºF ambient temperature. 10. Odd length slides available, contact Catalog Load factory for more information. Number A B C D E F G H J K L Capacity 11. Other non-standard options which are 6 5 available include: special marking, CLB-305-12 12.0 12.6 11.62 10.75 10.25 OMIT OMIT OMIT OMIT 140 LBS. special extensions, special finishes, 6 6 CLB-305-14 14.0 15.0 13.62 12.75 12.25 11.75 OMIT OMIT OMIT 135 LBS. lock-in and complete design changes 7 6 CLB-305-16 16.0 17.0 15.62 14.75 14.25 13.75 OMIT OMIT 9.875 125 LBS. per customer request. Contact factory 7 7 CLB-305-18 18.0 19.0 17.62 16.75 16.25 15.75 OMIT 8.375 11.875 120 LBS. as these options will require a special 7 8 reference number to assure receipt of CLB-305-20 20.0 21.0 19.62 18.75 18.25 17.75 14.375 9.375 13.875 110 LBS. specified options. 7 8 CLB-305-22 22.0 23.0 21.62 20.75 20.25 19.75 16.375 10.375 15.875 100 LBS. 7 8 CLB-305-24 24.0 25.0 23.62 22.75 22.25 21.75 18.375 11.375 17.875 95 LBS. 7 8 CLB-305-26 26.0 27.0 25.62 24.75 24.25 23.75 20.375 12.375 19.875 90 LBS. 7 8 CLB-305-28 28.0 29.0 27.62 26.75 26.25 25.75 22.375 13.375 21.875 80 LBS. 7 8 CLB-305-30 30.0 31.0 29.62 28.75 28.25 27.75 24.375 14.375 23.875 75 LBS. 45 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered Ball Bearing Slide Mounting Brackets Matrix For Ball Bearing Slides & Appropriate Cabinet Mounting Brackets with Maximum Extension CM1/Ext. CM2/Ext. CM3/Ext. CM4/Ext. CM5/Ext. CM6/Ext. CM7/Ext. CM8/Ext. CM9/Ext. CM11/Ext. CM12/Ext. CM14/Ext. LBS-11 ●/1.00 ●/1.00 ●/3.16 ●/6.16 ●/1.00 ●/2.40 ●/6.16 ●/1.00 ●/1.00 ●/3.16 ●/6.16 ●/1.00 ●/2.40 ●/6.16 LBS-12 ●/1.00 ●/1.00 ●/3.16 ●/6.16 ●/1.00 ●/2.40 ●/6.16 LBS-O ●/1.45 LBS-21 ●/1.45 LBS-22 ●/1.45 LBS-32 ●/1.36 ●/1.36 ●/3.53 ●/6.53 ●/1.36 ●/2.77 ●/6.16 CLB-203 ●/1.19 CLB-223 ●/1.77 ●/1.77 CLB-305 ●/1.36 ●/1.36 ●/3.53 ●/6.53 ●/1.36 ●/2.77 ●/6.16 CLB-307 ●/1.00 ●/1.00 ●/3.16 ●/6.16 ●/1.00 ●/2.40 ●/6.16 CLB-315 CM 1 CM 2 CM 3 CM 4 48 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered Ball Bearing Slide Mounting Brackets CM 6 CM 5 CM 7 CM 8 CM 9 49 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered Ball Bearing Slide Mounting Brackets CM 11 CM 12 CM 14 • A CM14 bracket kit consists of two CM5 brackets for the front of the slide and two CM14 brackets for adjustable mounting at the rear of the slide. 50 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the CLB-305-22-CM7?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
C-230-S Slide made from Cold Rolled Steel C-230-S-120
Access Non Pivoting Slide C-230-S-124
Non-Pivoting Slide Cabinet Front Mounting Rail C-300-S-110
Non-Pivoting Slide Cabinet Front Mounting Rail C-300-S-112
C-300-S Slide made from Cold Rolled Steel C-300-S-114-AR
Non-Pivoting Slide Cabinet Front Mounting Rail C-300-S-116
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods