LBS-11 (3/4) Extension Ball Bearing Slide TO ORDER, SPECIFY - LO - LBS-11 - Notes Length (Dim. A) 1. LBS-11 consists of one set of two non-handed slides. For locking at Optional lock-out feature is available. fully extended Cabinet mounting 2. All slides are supplied with special (.094” max. head height) position selection if required. #8-32x3/8 Phillips pan head screws and self-locking nuts for mounting (If desired) Enter CM and # of one set of slides. Use only these special screws when mounting through appropriate bracket. slide member to prevent internal damage to ball retainer. If mounting to See page 48 for cabinet rails, see cabinet mounting section for ball bearing slides. details on brackets 3. LBS-11 does not disconnect. available 4. Slide members are made from 14 gauge (.074) work hardened cold rolled steel. 5. Finish: clear zinc commercial plating. 6. Holes other than those shown may be in part at manufacture’s option. Catalog Load 7. Load capacity is based on one set of slides at full extension with load Number A B C D E F Capacity (center of gravity) centered between the slides and at midpoint of the LBS-11-10 10.00 7.50 5 4 1.50 3.00 145 LBS. slide (chassis section). Load capacities have a 100% (static load) safety LBS-11-12 12.00 9.00 6 5 1.50 3.00 140 LBS. factor at full extension. The slides will support more than the stated LBS-11-14 14.00 10.50 7 6 1.50 3.00 130 LBS. capacities but are not designed to be operated at capacities greater than those stated. LBS-11-16 16.00 12.00 8 7 1.50 5.00 120 LBS. 8. Grease applied to ball bearing slides has a temperature range of LBS-11-18 18.00 13.50 9 8 1.50 5.00 110 LBS. –45ºF to +350ºF. LBS-11-20 20.00 15.00 10 9 1.50 5.00 95 LBS. 9. Odd length slides available, contact factory for more information. LBS-11-22 22.00 16.50 11 10 1.50 5.00 85 LBS. 10. Other non-standard options which are available include: special LBS-11-24 24.00 18.00 12 11 1.50 7.00 80 LBS. marking, special extensions, special finishes, lock-in and complete LBS-11-26 26.00 19.50 13 12 1.50 7.00 70 LBS. design changes per customer request. Contact factory as these options will require a special reference number to assure receipt of specified LBS-11-28 28.00 21.00 14 13 3.50 5.00 60 LBS. options. LBS-11-30 30.00 22.50 15 14 3.50 5.00 50 LBS. 37 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered Ball Bearing Slide Mounting Brackets Matrix For Ball Bearing Slides & Appropriate Cabinet Mounting Brackets with Maximum Extension CM1/Ext. CM2/Ext. CM3/Ext. CM4/Ext. CM5/Ext. CM6/Ext. CM7/Ext. CM8/Ext. CM9/Ext. CM11/Ext. CM12/Ext. CM14/Ext. LBS-11 ●/1.00 ●/1.00 ●/3.16 ●/6.16 ●/1.00 ●/2.40 ●/6.16 ●/1.00 ●/1.00 ●/3.16 ●/6.16 ●/1.00 ●/2.40 ●/6.16 LBS-12 ●/1.00 ●/1.00 ●/3.16 ●/6.16 ●/1.00 ●/2.40 ●/6.16 LBS-O ●/1.45 LBS-21 ●/1.45 LBS-22 ●/1.45 LBS-32 ●/1.36 ●/1.36 ●/3.53 ●/6.53 ●/1.36 ●/2.77 ●/6.16 CLB-203 ●/1.19 CLB-223 ●/1.77 ●/1.77 CLB-305 ●/1.36 ●/1.36 ●/3.53 ●/6.53 ●/1.36 ●/2.77 ●/6.16 CLB-307 ●/1.00 ●/1.00 ●/3.16 ●/6.16 ●/1.00 ●/2.40 ●/6.16 CLB-315 CM 1 CM 2 CM 3 CM 4 48 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered Ball Bearing Slide Mounting Brackets CM 6 CM 5 CM 7 CM 8 CM 9 49 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered Ball Bearing Slide Mounting Brackets CM 11 CM 12 CM 14 • A CM14 bracket kit consists of two CM5 brackets for the front of the slide and two CM14 brackets for adjustable mounting at the rear of the slide. 50 www.generaldevices.com Phone: 317-897-7000 Email: sales@generaldevices.com ISO 9001:2000 Registered