Rotary Switches Keylock Rotary Switches SerieS 58 Single Deck, Antistatic Lock feAtureS Switch feAtureS • Minimum Space Behind Panel • Economical • 15,000 Vdc Static Protection • Solder Lug or PC Mount • 5 Tumbler-Plate Security • 36°, 45°, 60°, or 90° Throws • In-Panel Key Recoding • 1 or 2 Poles Per Switch • Up to 10 Positions for 1 Pole • 200 mA for 25,000 Cycles DiMeNSioNS in inches (and millimeters) Standard Style LOCKWASHER 36°, 45°, 60°, or 90° Ø 1.062 ± .020 (Ø 26,97 ± 0,51) Angle of throw SHOWN IN THIS VIEW ONLY Ø .900 (Ø 22,86) MOUNTING NUT .875 (22,23) ACROSS FLATS TERMINAL FOR .125 (3,18) THICK POSITION 1 A SHOWN IN THIS VIEW ONLY POSITION COMMON INDICATOR TERMINAL ARROW .268 ± .015 (6,81 ± 0,38) .260 ± .020 .792 ± .020 .625 ± .010 Keyslot is shown in (6,60 ± 0,51) (20,12 ± 0,51) (15,88 ± 0,25) .187 ± .015 switch position 1. (4,75 ± 0,38) Key removal position A. All terminals are provided Key is inserted cut edge down. 1.957 ± .062 regardless of the number of (49,71 ± 1,57) active switch positions. Pc Mount Style 36°, 45°, 60, or 90° Dimensions not shown are Angle of throw the same as above. .125 ± .015 (3,18 ± 0,38) 1.875 ± .062 (47,63 ± 1,57) Grayhill part number and date code marked on label. Customer part number marked on request. terMiNAL DetAiL recoMMeNDeD PANeL cut Solder Lug Solder Lug common Pc Mount A E G G .629 + .010 –.000 (15,98 + 0,25) C B H F H D C = .050 ± .010 (1,27±0,25) E = .125 ± .015 (3,18 ±0,38) A = .064 ± .005 (1,63±0,13) D = .062 Ø ± .002 (1,57 Ø ±0,05) F = .020 ± .003 (0,51 ±0,08) B = .032 ± .004 (0,81±0,10) .750 + .015 –.000 (19,05 + 0,38) G = .020 ± .003 (0,51 ±0,08) H = .062 ± .004 (1,57 ±0,10) Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com 4 3 2 1 4 3 2 1 Rotary Switches Keylock Rotary Switches circuitry 36° Angle of throw 45° Angle of throw reAr reAr View View COMMON TERMINAL (1 POLE) COMMON TERMINAL (1 POLE) .320 ± .015 (8,13 ± 0,38) DIAMETER .320 ± .015 (8,13 ± 0,38) DIAMETER CIRCLE OF TERMINAL CENTERS CIRCLE OF TERMINAL CENTERS .125 ± .015 .125 ± .015 (3,18 ± 0,38) (3,18 ± 0,38) 22.5˚ 18˚ POS. 1 POS. 1 LOCATION OF COMMONS LOCATION OF COMMONS 36˚ 45˚ 2 POLES 2 POLES VIEWED FROM FRONT END; SHOWN IN POSITION 1. VIEWED FROM FRONT END; SHOWN IN POSITION 1. 8 1 1 10 1 10 8 1 9 9 2 2 2 2 7 7 C2 C2 C1 8 8 3 C1 3 3 3 6 6 7 7 4 4 4 4 5 6 5 5 6 5 ONE POLE TWO POLE ONE POLE TWO POLE reAr reAr 60° Angle of throw 90° Angle of throw View View COMMON TERMINAL (1 POLE) COMMON TERMINAL (1 POLE) .320 ± .015 (8,13 ± 0,38) DIAMETER LOCATION OF COMMONS CIRCLE OF TERMINAL CENTERS 2 POLES .320 ± .015 (8,13 ± 0,38) DIAMETER CIRCLE OF .125 ± .015 TERMINAL CENTERS .125 ± .015 (3,18 ± 0,38) (3,18 ± 0,38) 30˚ 45˚ POS. 1 LOCATION OF COMMONS 2 POLES POS. 1 60˚ 90˚ VIEWED FROM FRONT END; SHOWN IN POSITION 1. VIEWED FROM FRONT END; SHOWN IN POSITION 1. 6 6 1 1 4 1 4 1 C2 C1 C2 C1 2 2 5 5 3 2 2 3 4 3 4 3 ONE POLE TWO POLE ONE POLE TWO POLE Lock SPecificAtioNS Switch SPecificAtioNS general characteristics Materials & finishes electrical characteristics Mounting: By bushing, nut and lockwasher keys: Brass; 2 supplied Chart is shown for non-shorting contacts and keying: All locks keyed alike except by Lock Barrel & Plug: Zinc, clear chromate resistive load and for the life limiting criteria special order Lockwasher: Steel, tin zinc plated indicated below. The data for the curve orientation of keylock Switch: Lock flats Mounting Nut: Steel, nickel-plated was measured at sea level, 25°C and 68% on both sides with key upright (cut side tumbler Plates: Brass relative humidity. Contact Grayhill for more down) in position 1. information key removals: if any of the following is true: life limiting criteria 36° Throw Switch At every position or are more critical than those listed; more cycles At 0° & 180° of operation are required; a larger make 45° Throw Switch At every position or and break current is required; the operating At 0°, 90°, 180°, 270° environment includes elevated temperatures 60° Throw Switch At every position or or reduced pressures. Curve A: 220 Vac all angles At 0°, 180° 300 of throw. B 90° Throw Switch At every position or A Curve B: 115 Vac and 30 200 At 0°, 180° Vdc for all angles of throw. Optional pulls Contact Grayhill 100 0 0 10 20 30 CYCLES x 1000 Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com CURRENT MILLIAMPS Rotary Switches Keylock Rotary Switches Switch SPecificAtioNS Continued contact resistance: Anti-Static Voltage: Anti-static types tested to Materials and finishes Initially: less than 10 mΩ withstand 15,000 Vdc Switch Base: Thermoset plastic End of life: less than 50 mΩ Switch housing: Nylon insulation resistance: (Between mutually Detent rotor: Nylon Mechanical characteristics insulated parts) Detent Balls: Steel, nickel-plated Switching Mode: Shorting (make before break) Initially: 50,000 MΩ Detent Springs, and contact Springs: or non-shorting (break before make) as limited Minimum: 10,000 MΩ Stainless steel by the Choices chart Breakdown Voltage: (Between mutually common ring: Brass, gold plate over silver type of contact: Wiping insulated parts) more than 600 Vac plate Number of terminals: All switches are provided Life expectancy: Per chart; cycle is 1 terminals: Brass, gold over silver and nickel with the full circle of terminals regardless of the rotation thru all active positions plus a full plate number of active positions return. rotor contact: Precious metal, gold alloy Stop Strength: 1.70 Nm maximum (15.0 in- carry current: 6A; maximum temperature lbs) rise 20°C Switching torque: 8 to 16 in-ozs choiceS AND LiMitAtioNS Lock Style and Switch Style and Angle of No. of Poles/ Positions Shorting or Description* Description throw Decks Deck Per Pole** Non-Shrtg. Series 58J Switches A = Standard, Solder Lugs J4: Standard–key pulls at Position 1 1 02 to 08 N or S 45° 1 P = Standard, PC Mount and at 90 Degree increments 2 02 to 04 N or S 1 02 to 10 N or S 36° 1 2 02 to 05 N or S 1 02 to 08 N or S A = Standard, Solder Lugs J8: Standard–key Pulls at each 45° 1 2 02 to 04 N or S P = Standard, PC Mount Position 1 02 to 04 N 90° 1 2 02 N 1 02 to 10 N or S 36° 1 2 02 to 05 N or S 1 02 to 08 N or S 45° 1 2 02 to 04 N or S A = Standard, Solder Lugs J9: Standard–key Pulls at Position 1 P = Standard, PC Mount and at 180 Degrees 1 02 to 06 N 60° 1 2 02 to 03 N 1 02 to 04 N 90° 1 2 02 N *Standard Keylock has anti-static protection. All keylock versions available without anti-static protection, with a reduced overall body length. Contact Grayhill for more information. **For single pole switches with maximum positions, specify continuous rotation or fixed stop when ordering. orDeriNg iNforMAtioN Available from your local grayhill Distribu- tor. For prices and discounts, contact a local Series Sales Office, an authorized local Distributor Lock Style: per Choices Chart J4, J8, J9 or Grayhill. Switch Style: per Choices Chart A or P Angle of throw: 36, 45, 60 or 90 (per Choices chart) Number of Decks: 01 Poles per Deck: = 1 or 2 (per Choices chart) Positions per Pole: 02 thru 10 (per Choices chart) type of contacts: (per Choices chart) N = Non-shorting S = Shorting Stop Arrangement Suffix: (needed only for 1-pole switches with maximum positions) F = Fixed stop between last and first positions *Leave blank for continuous rotation 58J8A36-01-1-10N-f Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com