GRAYHILL 60AD18-8-M-040C
Specifications
Manufacturer
Grayhill
Manufacturers Part #
60AD18-8-M-040C
Lead Time
8 Week Lead Time
Sub-Category
Optical Encoders
Series
60
Factory Pack Quantity
1
Datasheet
Opt_Encoder_60AD.pdf
2116 KiB
Extracted Text
Optical and Mechanical Encoders Optical Encoders SERIES 60AD Optical Encoder with integrated Joystick and Pushbutton FEATURES • Dome contacts provide excellent tactile feedback in all directions • Choices of actuation force, cable length and termination • Customized solutions available APPLICATIONS • Aerospace • Automotive • Medical devices DIMENSIONS in inches (and millimeters) Ø1.000 Unless otherwise specified, standard tolerance are: [ 25,4 ] Ø.050 [ 1,27 ] Linear ± .025 Diameter ± .010 Angle ± 2.0° .380 [ 9,65 ] .537 .615 .436 [ 13,64 ] [ 15,62 ] [ 11,07 ] Ø.810 [ 20,57 ] .591 [ 15,01 ] .945 .120 [ 24 ] [ 3,05 .628 [ 15,95 ] Ø .250 [ 6,35 ] .219 [ 5,56 ] M17X1 THREAD .407 .582 .125 [ 10,34 ] .040 [ 14,78 ] [ 3,18 ] [ 1,02 ] PIVOT POINT .205 [ 5,21 ] .950 [ 24,13 ] .886 [ 22,5 ] .460 [ 11,68 ] CABLE LENGTH ±.200 [±5,08] Connector: Amp 215083-8 Mating Connector: Amp 215079-8 ORDERING INFORMATION OPTION L M H 550±200 725±200 1050±250 1 ACTUATION FORCE (JOYSTICK) [g] Angle of Throw: 18= 18° or 20 positions 2 ACTUATION FORCE (PUSHBUTTON) [g] 625±200 800±200 1100±250 Joystick: 4= Four contacts & directions; 1.50±0.75 3.50±1.75 5.00±2.00 3 AVERAGE ROTATIONAL TORQUE [in-oz] 8= Four contacts & eight directions 60AD18-4-M-060S Termination: 0.050" center P= pin header; C= connector; S= stripped cable Cable Length: 020 thru 250 in 1/2 inch increments, 060= 6.0 inch cable Force Option: (see table) L=low, M=medium, H=high For prices and custom configurations, contact a local sales office, an authorized distributor, or Grayhill's sales department. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical and Mechanical Encoders Optical Encoders JOYSTICK OPERATION + ENCODER WAVEFORM AND TRUTH TABLE Standard Quadrature 2-Bit Code NEUTRAL NEUTRAL NEUTRAL NEUTRAL NEUTRAL NEUTRAL SPECIFICATIONS Rotary Specifications Joystick Specifications Materials and Finishes Operating Voltage: 5.00 ± 0.25 Vdc Supply Current: 5mA max Detent Housing: Nylon 6/10 Supply Current: 20mA max at 5 Vdc Output Code: 2-Bit Shaft: Nylon 6/10 Minimum Sink Current: 2.0mA at 5 Vdc Logic Output Characteristics: Shaft Insert: 303 stainless steel Power Consumption: 0.1mW max at 5 Vdc Neutral Position: 2.5 ± 0.5 Vdc Joystick Housing: Nylon 6,10 Output: Open collector phototransistor, High-State Position: >4.5 Vdc Centering Plate: Nylon 6,10 2.2k W external pull-up resistors are required Low-State Position: <0.5 Vdc Detent Balls: Carbon steel Output Code: 2-Bit quadrature, channel A Mechanical Life: 500k cycles min. Detent Springs: Music wire leads channel B by 90° in clockwise rotation Actuation Force: see table Dome Contacts: Stainless steel Logic Output Characteristics: Angle of Throw: 3.5° +2°/-1° Dome Housings: Polycarbonate over brass- High: No less than 3.5 Vdc lead frame Low: No greater than 1.0 Vdc Dome Retainers: Nylon 6,0; 30% glass-filled Mechanical Life: 1 million rotational cycles Environmental Ratings Joystick Actuators: Polyphthalamide; 50% (through all positions and a full return) glass filled Operating Temp. Range: -40°C to 85°C Rotational Torque: see table Storage Temp. Range: -55°C to 100°C Pushbutton Dome Retainer: Polycarbonate Maximum Rotational Speed: 100 RPM Relative Humidity: 96 hours at 90-95% Printed Circuit Board: NEMA grade FR-4. Mounting Torque: 15 in-lbs. maximum humidity at 40°C Glass-cloth epoxy, double clad with copper Shaft Push/Pull Out Force: 45 lbs min. Vibration: Harmonic motion with amplitude of Infrared Emitter: Gallium arsenide Shaft Side-Load Force: 20 lbs. max. 15g, within 10 to 2000 Hz for 12 hours Phototransistor: Planar silicon Terminal Strength: 15 lbs pull-out force min. Mechanical Shock: Resistors: Metal oxide on ceramic substrate Test 1: 100g for 6ms half-sine wave with a Solder: 95.5% SN, 3% AG, 0.5% CU velocity change of 12.3 ft/s Pushbutton Specifications Test 2: 100g for 6ms sawtooth wave with a Rating: 10 mA at 5 Vdc resistive OPTIONS velocity change of 9.7 ft/s Contact Resistance: less than 10 ohms Contact Grayhill for custom terminations, Contact Bounce: < 4ms make, <10 ms break rotational torque, number of positions, shaft Mechanical Life: 1 million actuations min. configurations, and resolutions. Actuation Force: see table Pushbutton Travel: .027 ± .010 in. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 60AD18-8-M-040C?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods