GRAYHILL 63K64
Specifications
Manufacturer
Grayhill
Manufacturers Part #
63K64
Sub-Category
Optical Encoders
Series
63
Factory Pack Quantity
1
Datasheet
Extracted Text
Optical and Mechanical Encoders Optical Encoders series 63K High resolution, Ball Bearing, 4-Pin Features • 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available • Sealed Version Available • Rugged Construction • Cable or Pin Version • 300 Million Rotational Cycles • 5,000 RPM Shaft Rotation Dimensions In inches (and millimeters) toP vieW .250 (6.35) .215 .249/.250 DIA (5.46) (6.32/6.34) .025 X 45˚ KEYWAY DEPTH 1.250 DIA (.64) (31.75) CHAMFER .350 .033 (8.89) (.84) 1/2 - 32 .725.025 .066 UN-2A (18.41.64) (1.68) THREADS GRAYHILL XXXX X-X XXXX X-X 63KXXX XX .776.025 (19.71.64) .650 DIA (16.51) .501 MOUNTING PIN #1 (12.73) .219 SURFACE (5.57) .100 .225 (2.54) (5.71) .150 (3.81) .300 (7.62) toP vieW .250 (6.35) .215 .249/.250 DIA (5.46) (6.32/6.34) .025 X 45˚ 1.250 DIA KEYWAY DEPTH (.64) (31.75) CHAMFER .350 .033 (8.89) (.84) 1/2 - 32 .725.025 .066 UN-2A (18.42.64) (1.68) THREADS GRAYHILL XXXX X-X XXXX X-X 63KXXX-XXX XX-XXX .650 DIA (16.51) .501 MOUNTING (12.73) .219 SURFACE PIN #1 (5.57) CONNECTOR IS MOLEX P/N CABLE LENGTH 14-56-3046 6.000, 25 OR EQUIVALENT UNLESS OTHERWISE SPECIFIED, DIMENSION TOLERANCES ARE AS FOLLOWS: LINEAR .010 (.25), DIAMETERS .010 (.025), ANGULAR 5˚ Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical and Mechanical Encoders Optical Encoders CirCuitry anD WaveForm: standard Quadrature 2-Bit Code PIN # 1 CYCLE GROUND 1 OUTPUT A OUTPUT B 2 10 KΩ OUTPUT B OUTPUT A 3 CHANNEL A LEADS CHANNEL B BY 10 KΩ 90˚ ± 45˚ IN ALL ROTATIONS FOR CLOCKWISE ROTATION OF SHAFT. POWER 5V 4 sPeCiFiCations electrical ratings environmental ratings operating voltage: 5 ±.25 Vdc operating temperature range: -40°C to 85°C Backplate: Polyester supply Current: 30 mA maximum at 5 Vdc storage temperature range: -55°C to 100°C Header: Phosphor bronze, 200 microinches tin over 50 microinches nickel (pin version only) Logic output Characteristics: relative Humidity: 90-95% at 40°C for 96 hours infrared emitter: Gallium aluminum arsenide Output Type: Open collector with integrated vibration resistance: Harmonic motion with Photo iC: Planar silicon Schmitt Trigger and 10 KW pull-up resistor amplitude of 15g, within a varied 10 to 2000 retaining ring: Stainless steel Maximum Sink Current: 16 mA at .40 volts Hz frequency for 12 hours per MIL-STD-202, Cable: 26 AWG, stranded/tinned wire, PVC Power Consumption: 150 mW maximum Method 204 coated on .100 (2,54) centers (cable version only) optical rise time: 500 nS typical shock resistance: Test 1: 100g for 6 mS, half- Connector: Glass-filled PCT, UL94V-0 optical Fall time: 14 nS typical sine wave with velocity change of 12.3 ft/s. Test 2: 100g for 6 mS, sawtooth wave with velocity Bearing subassembly mechanical ratings change of 9.7 ft/s. Bearing: NSK ABEC 5 (stainless steel) mechanical Life: 300 million revolutions Preload Collar: 303 stainless steel time Life: Guaranteed for 10 years of materials and Finishes continuous operation (calculated from emitter Bushing: Zinc diecast Housing: Zytel FR-50 degradation data) shaft: Stainless steel insert molded into nylon mounting torque: 20 in-lbs maximum rotor support terminal strength: 5 lbs terminal pull-out Code rotor and aperture: Chemically force minimum etched stainless steel/electroformed nickel solderability: 95% free of pin holes and voids Printed Circuit Board: NEMA Grade FR-4. externally applied shaft Force: Five microinches minimum gold over 100 Axial:15 lbs maximum; Radial:15 lbs microinches minimum nickel over copper maximum optical Barrier: Polyphenylene sulfide, 94 V-0 operating torque: 0.5 in-oz maximum (no detents) for unsealed versions orDerinG inFormation series style: K = Standard, 4-pin, high resolution KS = Sealed, 4-pin, high resolution Cycles: per channel per revolution = 25, 32, 50, 64, 100, 128, 256 63Ks256–060 termination: Blank (no dash or numbers): pins as described in drawing. Cable termination: 060 = 6.0in. Cable is terminated with Molex Connnector P/N 14-56-3046. available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 63K64?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
Optical Encoder Rotary Incremental Round 2oz.in(Avg) Straight Digital Square Wave Panel Mount Cable ...
Manufacturers


What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods