I/O Modules OPENLINE STANDARD, MINI, G5 Manual Override Output Modules FEATURES • Integral Three Position Manual On/Manual Off and Automatic Control Toggle Switch • Transient Protection: Meets the requirements of IEEE 472, “Surge Withstanding Capability Test” • UL, CSA Certified • Optical Isolation • G5 Modules Provide Replaceable 5x20 mm Glass Fuse • Built-in Status LED CIRCUITRY Maximum Current Versus AC Outputs DC Outputs Ambient Temperature The chart indicates continuous current to limit + LOAD 1 the junction temperatures to 100°C. Information 1 LOAD is based on steady state heat transfer in a two VOLTAGE VAC VDC SPIKE cubic foot sealed enclosure. SNUBBER PROTECTION LOAD 2 2 – LOAD 4 G5 PACKAGE TRIGGER CIRCUIT 3 DRIVER CIRCUIT 2 Rx Rx 3 + 3 + OFF DC CONTROL 1 DC CONTROL OFF 4 – AUTO 4 – AUTO ON ON 5 5 -40˚ -20˚ 0 20˚ 40˚ 60˚ 80˚ 100˚ AMBIENT TEMPERATURE (˚C) Figure 1 Maximum Peak Surge Current FUSES Versus Surge Duration (AC Outputs) G5 Fuses are 5 Amp Littelfuse part number Information is based on a supply frequency of 217005 or equivalent. 60 Hz sinusoidal and a resistive or inductive load. Application of maximum surge current may not be repeated until the module temperature has returned to its steady state value. 300 200 100 80 60 40 30 20 10 6 4 3 1 1 12346 10 20 40 60 100 1000 NUMBER OF FULL CYCLES AT 60 HERTZ Figure 2 I/O 12 Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com LOAD CURRENT (AMPS) PEAK SURGE CURRENT (AMPERES) I/O Modules #07#.8'44+&'762761&7.'5 SPECIFICATIONS: All Modules* Power Dissipation: 1.0 Watt/Amp typical Operating Temperature Range: Output Specifications -40°C to +100°C Load Current Range (rms): 0.03 to 3.5 Amps, Maximum current is derated as shown in Figure General Characteristics 1. Isolation Voltage Field to Logic: 4000 Vac (rms) Maximum Surge Current (peak): 80 Amps at 60 Hz, minimum 1 cycle as qualified by Figure 2 for AC outputs. 5 Vibration: 20 G’s peak or .06” double amplitude Amp maximum for 1 second for DC outputs. 10–2000 Hz per MIL–STD–202, Method 204, Turn-on Time (60 Hz): 8.3 mSec maximum for AC Condition D outputs. 20 µSec maximum for DC outputs. Mechanical Shock: 1500 G’s 0.5 mS half-sine per Turn-off Time (60 Hz): 8.3 mSec maximum for AC MIL–STD–202, Method 213, Condition F outputs. 50 µSec maximum for DC outputs. Storage Temperature Range: ON State Voltage Drop (peak): 1.5 volts max. -40°C to +125°C *Specifications apply over operating temperature range unless noted otherwise. SPECIFICATIONS: By Part Number AC Outputs Type/Function Grayhill Part Number G5, Zero Voltage Turn On, Manual Override 70G-OAC5MA 70G-OAC24MA 70G-OAC24AMA Specifications Units Nominal Line Voltage Vac 120 120 240 Load Voltage Range Vac 24-140 24-140 24-280 Minimum Peak Blocking Voltage Volts 400 400 600 Maximum Off-state Leakage @ 60Hz mA, rms 2 2 4 Nominal Logic Voltage (Vcc) Vdc 5 24 24 Logic Voltage Range Vdc 4-6 18-32 18-32 Max. Logic Supply Current @ Nominal Vcc mA 20 8 8 Nominal Input Resistance (Rx) W 100 2700 2700 Minimum Drop-Out Voltage Vdc 1 1 1 Maximum Reverse Logic Voltage Vdc -5 -5 -5 Maximum Zero Voltage Offset (Vpeak) 8 8 8 Frequency Range (Hz) 25-70 25-70 25-70 DC Outputs Available from your local Grayhill Distributor. For Grayhill Part Number Type/Function prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. G5 Manual Override 70G-ODC5MA 70G-ODC24MA Specifications Units Maximum Line Voltage Vdc 60 60 Load Voltage Range Vdc 3-60 3-60 Maximum Off-state Leakage @ 60 Vdc mA 1.5 1.5 Maximum Turn-on Time µSec 20 20 Maximum Turn-off Time µSec 50 50 Nominal Logic Voltage (Vcc) Vdc 5 24 Logic Voltage Range Vdc 4-6 18-32 Max. Logic Supply Current @ Nominal Vcc mA 13 9 Nominal Input Resistance (Rx) W 150 2700 Minimum Drop-Out Voltage Vdc 1 1 Maximum Reverse Logic Voltage Vdc -5 -5 Maximum Clamping Voltage Vdc 80 80 I/O 4#;*+..X 0%T˜IJE+..)418'8'07'˜#4#0)'X ..+01+5JNIFIgIMMK˜˜*10'UKNLgGIHgENHN˜ #:UKNLgGIHgFLFN˜999T)4#;*+..T%1/ 13