DIP Switches 76HPSB 08GW 76HPSB08GW XXXX XXXX OPeN OPeN 76HPSB 08GW 76HPSB08GW XXXX XXXX OPeN OPeN 76HPSB 08GW 76HPSB08GW XXXX XXXX OPeN OPeN Surface Mount DIP Switches FeAtUreS SerIeS 76HP ® • Compatible with SMt Assembly Side Actuated PIANO-DIP Including Infrared reflow and Vapor-Phase • easily Accessed when PC Boards are racked • reliable Spring and Ball Contact DIMeNSIONS In inches (and millimeters) .380 recommended PC Pad Dimensions LeNGtH ± .010 ± .010 (0,25 (9,65 See OrDer INFO ± 0,25) .023 .055 ± .010 (5,84) (1,40 ± 0,25) reF. .305 ± .010 .530 .280 (7,11) (7,75 ± 0,25) .025 (0,64) r. (13,46) tyP. tyP. .303 ± .015 .100 ± .005 (7,70 ± 0,38) C C (2,54 ± 0,13) tyP. .070 (1,78) tyP. .012 ± .001 L L .424 ± .015 (0,30 ± 0,03) .100 (2,54) tyP. (10,77 ± 0,38) tyP. C C L L tyP. CIrCUItry Vibration Resistance: Per Method 204, test Materials and finishes Condition B. 1 mS opening (10 mS allowed) Shorting Member: Brass, gold-plated As viewed from Mechanical Shock: Per Method 213, test over nickel barrier. the top of the Condition A. 1 mS opening (10 mS allowed) Base contacts: Copper alloy, gold-plated, switch in the thermal Shock Resistance: Per specification; over nickel barrier. positions shown no failures; passes contact resistance terminals: Copper alloy, matte tin plated over in the drawing. terminal Strength: Per specification nickel barrier. thermal aging: 1,000 hours at 85°C; no Non-Conductive Parts: Cover is natural color failures thermoplastic, actuators are white thermoplastic SpecificationS (UL94V-O) electrical Ratings environmental Ratings tape Seal: Not available with tape Seal. Make-and-break current Rating: 2,000 Meets all requirements of MIL- S-83504**. Where tAPe AND reeL PACkAGING operations per switch position at 1 mA, 5 Vdc; Grayhill performance is superior, the MIL spec 50 mA, 30 Vdc; or 150 mA, 30 Vdc Meets requirements of is listed in parentheses. contact Resistance: Initial: 30 mohms eIA 481-2 or eIA 481-3 operating temperature Range: -40°C to + maximum; After Life: 100 mohms maximum 85°C 13 INCH (10 mA at 50 Vdc, open circuit) Storage temperature Range: -55°C to + DIAMeter reeL insulation Resistance: Minimum, at 100 Vdc 85°C between adjacent closed contacts and also Moisture Resistance: Per MIL-StD-202, across open switch contacts. Initial: 2,000 Method 106 Mohms Dielectric Strength: Minimum voltage (AC Soldering information CONDUCtIVe rMS) measured between adjacent closed Solderability: Per MIL-StD-202, Method 208 PLAStIC eMBOSSeD contacts and also across open switch contacts. tested to eIA Standard rS-448-2. tAPe Initial: 750 volts; After Life: 500 volts Resistance to Soldering Heat: Per MIL-S-83504, six second test carry Rating: 5 amps, maximum rise of 20°C Switch Capacitance: 2 pF at 1 megahertz Recommended processing temperature: 220°C–230°C (1 pass—260°C maximum) DIreCtION processing position: Switch is to be processed OF FeeD Mechanical Ratings 16 & 24mm with all actuators in the closed (on) position as Mechanical Life: 2,000 operations per switch 16mm tAPe shipped. position OrDerING INFOrMAtION: tape and reel Packaging (500 switches per reel) No. of Length Length Carrier Width Part Positions* (inches) (metric) Dim. A Number 2 0.280" 7,1 mm 24 mm 76HPSB02GWrt 16mm 4 0.480" 12,2 mm 24 mm 76HPSB04GWrt 32, 44 & 56mm 6 0.680" 17,3 mm 32 mm 76HPSB06GWrt PIN ONe LOCAtION tAPe 8 0.880" 22,4 mm 44 mm 76HPSB08GWrt 10 1.080" 27,4 mm 44 mm 76HPSB10GWrt COVer tAPe * For other lengths, contact Grayhill, Inc. DIM. A (See OrDer INFO.) ** Note: 100% matte tin terminal plating does not meet MIL-S-83504 for lead content. each reel has a 15.750 inch (390 mm) minimum leader and a 6.30 inch (160 mm) Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, minimum trailer. an authorized local Distributor or Grayhill. DIP Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com 8