GRAYHILL 94RB10CT

DIP Switches Rotary DIP Switches SerieS 94r economical, Binary Coded CoDe & truth taBLeS: FeatureS • 10,000 Cycles of Operation • Gold-Plated Contacts Standard CODE OUTPUT CODE OUTPUT Complement Output Output 12 4 8 12 4 8 • Sealed Contact System 0 1 • Right Angle Mount 2 • Octal, BCD & Hexadecimal Codes 3 4 • Standard or Complement 5 • RoHS Compliant 6 7 8 DiMenSionS in inches (and millimeters) 9 A .094 .162 B (2,93) (4,11) C .213 .480 D (5,41) (12,19) .443 E (11,25) F .286 (7,26) Dot indicates terminal to common connection. All switches are continuous .200 (5,08) .210 (5,33) .689 (17,50) rotation. .433 (11,00) 1.123 (28,52) Octal and Octal Complement outputs are 0 thru 7 positions. .044 (1,12) BCD and BCD Complement outputs are 0 DIA. Pin #1 thru 9 positions. 1 8 .179 C C (4,55) Hexadecimal and Hexadecimal 4 2 Complement outputs are 0 thru F positions. PC board layout .059 as viewed from the .058 (1,47) (1,50) Standard codes have natural color top of the switch DIA. .199 (5,05) rotors; complements have rotors in a .235 (5,97) contrasting color. Unless otherwise indicated, tolerances are ± .010 (0,25) SpeCiFiCationS: Shorting Member: Copper alloy plated. environmental ratings electrical ratings 30 microinches minimum gold over 50 Make-and-break Current rating: 30 mA at 30 operating temperature range: -40° to microinches minimum nickel. +85°C. Vdc for 10,000 cycles of operation. terminals: Copper alloy, matte tin plated over Carrying Current rating: 100 mA at 50 Vdc Storage temperature range: -40° to +85°C. nickel barrier. Moisture resistance: 240 hours with Contact resistance: 50 mohms maximum temperature cycling and polarization. Passes initially (measured at 10 mA, 50 mVdc). internal o-ring: Rubber BUNA-N 150 mohms maximum after life. insulation resistance and dielectric strength Soldering information per MIL-STD-202F, Method 106 following insulation resistance:(measured at 100 Vdc *For the most current soldering & cleaning processing guidelines, reference Grayhill Dip Switch Processing across open switch contacts) exposure. Information, Bulletin 1234 Initial: 5000 Mohms minimum. After Life: 1000 Soldering temperature: 260° C maximum. Mohms minimum. Materials and Finishes Cleaning: Acceptable solutions include Dielectric Strength: (measured across rotor and Switch Body: Plastic (UL94 V-O) 1-1-1 Trichlorenthane, Freon (TF, TE, or open switch contacts) Initial: 500 Vac RMS Contact Material: Copper alloy plated. TMS), Isopropyl Alcohol and detergent minimum. After Life: 250 Vac RMS 30 microinches minimum gold over 50 (140°F maximum). Solutions which are not microinches minimum nickel. recommended include Acetone, Methylene Mechanical ratings Chloride, and Freon TMC. Mechanical Life: 10,000 cycles of operation. orDerinG inForMation: Series 94r One cycle is a rotation through all positions and a complete return through all positions. Continuous rotation Versions Mechanical Shock: 1000g's, 0.5 mS, half sine per no. of Standard Code Complement MIL-STD-202F, Method 213, Test Condition E. Code positions part number part number Vibration resistance: 10-2000 Hz at 15G or 0.060" double amplitude per MIL-STD-202F, Octal 8 94rB08Ct 94rC08Ct Method 204, Test Condition B. BCD 10 94rB10Ct 94rC10Ct Hexadecimal 16 94rB16Ct 94rC16Ct operational torque: 2 to 6 inch-ounces initially and 1.2 inch-ounces minimum after life. rotational Stop Versions* no. of Standard Code Complement Code positions part number part number Hexadecimal 16 94rB16Ft 94rC16Ft * Consult Grayhill for 8 or 10 position Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com SWITCH POSITION