The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features Double lock 1. Full Lock Function Added engaged The inner lock system adopts a full lock mechanism. Double lock This mechanism prevents disengagement to occur due to engaged an unexpected external shock. 2. Increase in Crimping Contact Fixation Force and Semi-insertion Prevention The double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. 3. Mold Lance Adopted Since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. Mis-insertion Prevention Equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. 8. Correspond to Automatic Insertion Machine 5. Means to Prevent Solder Crack The radial tape packaging is provided for 2 to The glass enforcement resin is adopted for the pin header to 8 contacts on the straight pin header side, in prevent a solder crack to occur due to heat compression. order to correspond to mass production. 6. Correspond to Potting 9. Various Applications Corresponding to potting, the pin header is provided for With the same series, various applications can product variations. be used for the board solder dip type and in- Corresponding to potting up to 8mm and mounting height line. 19.8mm (no retainer), the low profile is achieved. 7. Production Facility Cost Reduction Applications The female crimping contact uses the DF1B series crimping Electronic equipment, office machines, contact, which has been conventionally marketed. industrial equipment, and consumer Investment for new facilities isn't needed. However, if the equipment, and so on retainer is installed in the cable with AWG#22 or more wire, use the DF1E crimping contact. The female crimping contact for in-line is used together with the DF1B applicator. Therefore, no investment is needed for new facilities. B116 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Products Specifications Current rating Note 1. AWG#20 to 24 : 3A 26 : 2A Operating Temperature Range : -35 to +85ç Note 2. Storage Temperature Range : -10 to +60ç Note 3. Rating 28 : 1A Operating Moisture Range : -20 to 80% Storage Moisture Range : -40 to 70% 30 : 0.5A Voltage rating 250VAC C-UL File No. C-UL Rating UL :E52653 AWG#20 to #22 : 3A Current rating AWG#24 to #28 : 1A Rating AWG#30 : 0.5A Voltage rating 30V AC Item Specification Condition 1. Contact Resistance 30m ohms max. Measured at 20mV max. and 1mA 2. Insulation Resistance 1000M ohms min. 500V DC 3. Withstanding voltage 650V AC/1 minute No flashover or insulation breakdown. 4. Single Insertor/Extraction Forth MIN 0.4N, MAX 4.4N Measured at the square steel pin with 0.635±0.002 5. Durability (Mating/un-mating) 30m ohms max 30 cycles 6. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 2 7. Shock No electrical discontinuity of 1µs or more Acceleration of 490 m/s , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. 30m ohms max Humidity (Steady state) 96 hours at temperature of 40ç and humidity of 90% to 95% 9. Temperature Cycle 30m ohms max. (-55ç: 30 minutes-> 5 to 35ç: 5 minutes-> 85ç: 30 minutes-> 5 to 35ç: 5 minutes) 5 cicles 10. Resistance to Soldering heat No deformation of components affecting performance. Flow: 250ç for 10 seconds Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material Product Part Material Treatment Remarks Socket Insulator Polyamide White UL94V-0 Insulator Polyamide Beige UL94V-0 Header Contact Brass Tin-lead plated ––––––– In-line Plug Insulator Polyamide White UL94V-0 retainer Insulator Polyamide Black UL94V-0 Crimping contact Contact Phosphor copper Tin plated ––––––– Note : The whisker method is implemented for HRS tin plating. B117 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Ordering Information Pin Header q Series Name : DF r Number of Contacts : 2 to 15 contacts DF 1E C - * P - 2.5 DSA w Series No. : 1E t Connector Type qwet r y u e Hold Types P : Pin Header y Contact Pitch : 2.5mm Standard Product Potting u Form type With Boss With Boss DSA : Straight through hole C Without Boss G Without Boss DS : Right Angle Type Note 1 : The right angle pin header has no symbol. Note 2 : The potting header has 2 to 10 contacts. Socket q Series Name : DF r Connector type DF 1E - * S - 2.5 C w Series No. : 1E S: Socket qwey r t e Number of Contacts : 2 to 15 contacts t Contact Pitch : 2.5mm y Form Type C : Crimping socket In-line Plug q Series Name : DF r Number of Contacts : 2 to 10 contacts DF 1E A - * EP - 2.5 C w Series No. : 1E t EP : In-line plug qweu r t y e In-line Plug type y Contact Pitch : 2.5mm Blank: With Panel mount Lock u Form Type A : Without Panel mount Lock C : Crimping socket Crimping Contact q Series Name : DF e Applicable Cable Size DF 1E - ** SCF w Series No. : 2022 : AWG#20 to #22 qw e r Socket side : 1B (Note 1) 2428 : WG#24 to #28 1E (Note 1) 30 : AWG#30 Plug side : 1E r Packaging Type SCF : Female contact : Reel SC : Female contact : Bag PCF : Male contact : Reel PC : Male contact : Bag Note 1 : When the retainer is used, use DF1E-2022SC(F), DF1B- 2428SC(F), and DF1B-30SC(F) contacts. Note 1 : When no retainer is used, all DF1B-**SC(F) and DF1E- 2022SC(F) contacts can be used. Retainer q Series Name : DF r Connector Type DF 1E - * RS/P - 2.5 w Series No. : 1E RS/P : Retainer qwet r e Number of Contacts : 2 to 10 contacts Commonly used for socket and in-line plug t Contacts Pitch:2.5mm B118 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Application Pattern Socket Retainer Photo : Contact Inserted Pin Header In-line Plug Straight TypeIn-line Plug (Panel Mount Lock Type) Photo: Contact Inserted Straight Potting TypeIn-line Plug Photo: Contact Inserted Right Angle Type B119 +0.1 * – Ø1.1 0 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Right Angle Pin Header 5.4 Mold Cavity Contact No. mark No. mark 10 A M 0.64 P = 2.5 A B Contact No.1 indicated Note 2 The symbol ** included in Part Number CL No. Number of Contacts A B HRS No. and the product spec DF1E –02P–2.5DS(**) 541 – 0985– 0 –** 2 02.5 07.5 No. indicates the Specific No. DF1E –03P–2.5DS(**) 541 – 0986– 3 –** 3 05.0 10.0 DF1E –04P–2.5DS(**) 541 – 0987– 6 –** 4 07.5 12.5 DF1E –05P–2.5DS(**) 541 – 0988– 9 –** 5 10.0 15.0 541 – 0989– 1 –** 6 12.5 17.5 DF1E –06P–2.5DS(**) DF1E –07P–2.5DS(**) 541 – 0990– 0 –** 7 15.0 20.0 DF1E –08P–2.5DS(**) 541 – 0991– 3 –** 8 17.5 22.5 DF1E –09P–2.5DS(**) 541 – 0992– 6 –** 9 20.0 25.0 DF1E –10P–2.5DS(**) 541 – 0993– 9 –** 10 22.5 27.5 DF1E –11P–2.5DS(**) 541 – 0994– 1 –** 11 25.0 30.0 27.5 32.5 DF1E –12P–2.5DS(**) 541 – 0995– 4 –** 12 DF1E –13P–2.5DS(**) 541 – 0996– 7 –** 13 30.0 35.0 DF1E –14P–2.5DS(**) 541 – 0997– 0 –** 14 32.5 37.5 DF1E –15P–2.5DS(**) 541 – 0998– 2 –** 15 35.0 40.0 Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. Note 3. : Styles of 2 to 4 contact connectors partially differ from those in above figures. BPCB mounting pattern (Board Thickness t = 1.6 ± 0.1) A±0.1 P = 2.5±0.05 B120 8 13.8 6.95 3.2 10.8 0.5 5.9 2.9 8.3 4.5 +0.1 * – Ø1.1 0 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 5.4Straight Pin Header Mold Cavity No. mark Contact No. mark A 10 P = 2.5 A B Contact No.1 indicated M 0.64 Note 2 The symbol ** included in Part Number CL No. Number of Contacts A B HRS No. and the product spec DF1EC–02P–2.5DSA(**) 541– 0867– 4 –** 2 02.5 07.5 No. indicates the Specific No. DF1EC–03P–2.5DSA(**) 541– 0868– 7 –** 3 05.0 10.0 DF1EC–04P–2.5DSA(**) 541– 0869– 0 –** 4 07.5 12.5 DF1EC–05P–2.5DSA(**) 541– 0870– 9 –** 5 10.0 15.0 DF1EC–06P–2.5DSA(**) 541– 0871– 1 –** 6 12.5 17.5 7 15.0 20.0 DF1EC–07P–2.5DSA(**) 541– 0872– 4 –** DF1EC–08P–2.5DSA(**) 541– 0873– 7 –** 8 17.5 22.5 DF1EC–09P–2.5DSA(**) 541– 0874– 0 –** 9 20.0 25.0 DF1EC–10P–2.5DSA(**) 541– 0875– 2 –** 10 22.5 27.5 DF1EC–11P–2.5DSA(**) 541– 0876– 5 –** 11 25.0 30.0 DF1EC–12P–2.5DSA(**) 541– 0877– 8 –** 12 27.5 32.5 DF1EC–13P–2.5DSA(**) 541– 0878– 0 –** 13 30.0 35.0 DF1EC–14P–2.5DSA(**) 541– 0879– 3 –** 14 32.5 37.5 DF1EC–15P–2.5DSA(**) 541– 0880– 2 –** 15 35.0 40.0 Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. Note 3. : Styles of 2 to 4 contacts partially differ from those in above figures. Note 4. : The radial package is prepared for DF1EC-*P-2.5DSA(25).However, 2 to 8 contacts only are provided. (Quantity of packaged 2 and 3 contacts: 1000pcs., 4 to 8 contacts: 400pcs.) BPCB mounting pattern (Board Thickness t = 1.6 ± 0.1) A±0.1 P = 2.5±0.05 B121 8 6.95 3.2 3.6 10.8 0.5 5.9 8.3 4.5 +0.1 Ø1.1 * – 0 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Straight Pin Header for Potting 5.4 Mold Cavity Contact No. mark No. mark A 10 P= 2.5 A B Contact No.1 indicated M 0.64 Note 2 Note 2 The symbol ** Part Number CL No. Number of Contacts A B C included in HRS No. DF1EG –02P–2.5DSA(**) 541 – 0923 – 3** 2 02.5 07.5 7.8 and the product DF1EG –03P–2.5DSA(**) 541 – 0924 – 6** 3 05.0 10.0 7.8 spec No. indicates the Specific No. DF1EG –04P–2.5DSA(**) 541 – 0925 – 9** 4 07.5 12.5 7.8 5 10.0 15.0 8.0 DF1EG –05P–2.5DSA(**) 541 – 0926 – 1** DF1EG –06P–2.5DSA(**) 541 – 0927 – 4** 6 12.5 17.5 8.0 DF1EG –07P–2.5DSA(**) 541 – 0928 – 7** 7 15.0 20.0 8.0 DF1EG –08P–2.5DSA(**) 541 – 0929 – 0** 8 17.5 22.5 8.0 DF1EG –09P–2.5DSA(**) 541 – 0930 – 9** 9 20.0 25.0 8.0 DF1EG –10P–2.5DSA(**) 541 – 0931 – 1** 10 22.5 27.5 8.0 DF1EG –11P–2.5DSA(**) 541 – 0932 – 4** 11 25.0 30.0 8.0 Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. However, the quantity for delivery will be changed according to spec number. Note 2. : The 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. The 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. Note 3. : Styles of 2 to 4 contact may partially differ from the above figures. Note 4. : The radial tape packaging is prepared for DF1EG-*P-2.5DSA(25).However, 2 to 8 contacts are available. (Quantity of packaged 2 and 3 contacts : 800pcs., 4 to 8 contacts: 400pcs.) BPCB mounting pattern (Board Thickness t = 1.6 ± 0.1) A±0.1 P = 2.5±0.05 B122 C 6.95 3.2 3 16.3 5.9 8.3 4.5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. In-line Plug (Panel Mount Lock Type) 2.8 A 2.8 B P = 2.5 Mold Cavity No. mark Contact No. mark A 1 0 C Contact No.1 indicated 10 9 7 5 3 1 Contact No. indicated Photo: Contact Inserted. Contact No.1 indicated Note 2 Note 3 Part Number CL No. Number of Contacts A B C D E DF1E–02EP–2.5C(**) 541– 0943– 0 –** 2 8.0 2.5 15.0 8.4 11.9 DF1E–03EP–2.5C(**) 541– 0944– 3 –** 3 10.5 5.0 17.5 10.9 14.4 DF1E–04EP–2.5C(**) 541– 0945– 6 –** 4 13.0 7.5 20.0 13.4 16.9 5 15.5 10.0 22.5 15.9 DF1E–05EP–2.5C(**) 541– 0946– 9 –** 19.4 DF1E–06EP–2.5C(**) 541– 0947– 1 –** 6 18.0 12.5 25.0 18.4 21.9 DF1E–07EP–2.5C(**) 541– 0948– 4 –** 7 20.5 15.0 27.5 20.9 24.4 DF1E–08EP–2.5C(**) 541– 0949– 7 –** 8 23.0 17.5 30.0 23.4 26.9 DF1E–09EP–2.5C(**) 541– 0950– 6 –** 9 25.5 20.0 32.5 25.9 29.4 DF1E–10EP–2.5C(**) 541– 0951– 9 –** 10 28.0 22.5 35.0 28.4 31.9 The symbol ** included in HRS No. and the product spec No. indicates the Specific No. Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. Note 3. In regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. Note 4. Use the no radius side at the panel edge in the looking area. Note 5. : Panel fixation is loosened. (May be enlarged according to the panel board thickness.) Note 6. : Styles of 2 to 4 contact partially differ from those in the above figures. * Refer to page B122 for the retainer. BPanel Cutout +0.1 ( E + 0 +0.1 D 0 +0.2 5.8 0 Panel Thickness X 1.7 to 2.0 1.5 Panel 1.3 to 1.6 1.0 Note 4 0.5 0.9 to 1.2 0.0 0.7 to 0.8 B123 +0.1 3.5 0 0.9 18.8 8.1 12 6.9 4.2±0.05 +0.1 +0.1 1.1 8.4 0 0 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. In-line Plug A B P = 2.5 Mold Cavity No. mark Contact No. mark A 1 0 Contact No.1 indicated Photo: Contact Inserted 1 0 9 7 5 3 1 Contact No. mark Contact No.1 indicated Note 2 Note 3 The symbol ** included in Part Number CL No. Number of Contacts A B HRS No. and the product spec DF1EA –02EP–2.5C(**) 541 – 0957 – 5 – ** 2 08.0 02.5 No. indicate a Specific No. DF1EA –03EP–2.5C(**) 541 – 0958 – 8 – ** 3 10.5 05.0 DF1EA –04EP–2.5C(**) 541 – 0959 – 0 – ** 4 13.0 07.5 DF1EA –05EP–2.5C(**) 541 – 0960 – 0 – ** 5 15.5 10.0 DF1EA –06EP–2.5C(**) 541 – 0961 – 2 – ** 6 18.0 12.5 DF1EA –07EP–2.5C(**) 541 – 0962 – 5 – ** 7 20.5 15.0 DF1EA –08EP–2.5C(**) 541 – 0963 – 8 – ** 8 23.0 17.5 DF1EA –09EP–2.5C(**) 541 – 0964 – 0 – ** 9 25.5 20.0 DF1EA –10EP–2.5C(**) 541 – 0965 – 3 – ** 10 28.0 22.5 Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. Note 3. : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. Note 4. : Styles of 2 to 4 contacts partially differ from the above figures. * Refer to page B122 for retainer. B124 18.8 0.9 8.1 6.9 A The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Socket P = 2.5 A B C Note 2 10 Photo: Contact Inserted 1 No. 1 contact indicated Contact No. mark 7.55 Mold Cavity No. mark Note 3 Note 3 Note 4 Note 4 The symbol ** Part Number CL No. Number of Contacts A B C included in HRS No. DF1E –02S–2.5C(**) 541 – 0811 – 0 – ** 2 02.5 08.0 05.4 and the product DF1E –03S–2.5C(**) 541 – 0812 – 2 – ** 3 05.0 10.5 07.9 spec No. indicate a Specific No. 07.5 13.0 10.4 DF1E –04S–2.5C(**) 541 – 0813 – 5 – ** 4 DF1E –05S–2.5C(**) 541 – 0814 – 8 – ** 5 10.0 15.5 12.9 DF1E –06S–2.5C(**) 541 – 0815 – 0 – ** 6 12.5 18.0 15.4 DF1E –07S–2.5C(**) 541 – 0816 – 3 – ** 7 15.0 20.5 17.9 DF1E –08S–2.5C(**) 541 – 0817 – 6 – ** 8 17.5 23.0 20.4 DF1E –09S–2.5C(**) 541 – 0818 – 9 – ** 9 20.0 25.5 22.9 DF1E –10S–2.5C(**) 541 – 0819 – 1 – ** 10 22.5 28.0 25.4 DF1E –11S–2.5C(**) 541 – 0820 – 0 – ** 11 25.0 30.5 27.9 DF1E –12S–2.5C(**) 541 – 0821 – 3 – ** 12 27.5 33.0 30.4 DF1E –13S–2.5C(**) 541 – 0822 – 6 – ** 13 30.0 35.5 32.9 DF1E –14S–2.5C(**) 541 – 0823 – 9 – ** 14 32.5 38.0 35.4 DF1E –15S–2.5C(**) 541 – 0824 – 1 – ** 15 35.0 40.5 37.9 Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to spec number. Note 2. : The 2 contact connector is equipped with the convex portion to prevent false-insertion. Note 3. : The 2 consult Has no wall on the locking side Note 4. : The 2 to 5 contacts contain the retainer fixed convex portions at both ends. * Refer to page B122 for the retainer. B125 11.8 8.5 4.55 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Retainer A 1.9 B 1.7 P = 2.5 0.7 Note2 Note2 Contact No. mark 1 0 A Mold Cavity No. mark The symbol ** included in Part Number CL No. Number of Contacts A B HRS No. and the product spec DF1E –02RS/P–2.5(**) 541 – 0971 – 6 2 08.0 02.5 No. indicates the Specific No. DF1E –03RS/P–2.5(**) 541 – 0972 – 9 3 10.5 05.0 DF1E –04RS/P–2.5(**) 541 – 0973 – 1 4 13.0 07.5 DF1E –05RS/P–2.5(**) 541 – 0974 – 4 5 15.5 10.0 DF1E –06RS/P–2.5(**) 541 – 0975 – 7 6 18.0 12.5 DF1E –07RS/P–2.5(**) 541 – 0976 – 0 7 20.5 15.0 DF1E –08RS/P–2.5(**) 541 – 0977 – 2 8 23.0 17.5 DF1E –09RS/P–2.5(**) 541 – 0978 – 5 9 25.5 20.0 DF1E –10RS/P–2.5(**) 541 – 0979 – 8 10 28.0 22.5 Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to spec number. Note 2. : The 2 to 4 contacts contain socket and plug fixed holes at both ends. * This retainer can be used together with the socket and relay plug. B126 5.9 3.3 1.5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug Crimping Contact 1.5 2.2 0.64 0.64 Applicable Cable (Tin plating annealed copper wire)Recommended Cable UL1061, UL1007 Conductor Size (Wire construction) AWG # 20 (21 cores./0.18mm) Strip Length 3.0 to 3.7mm AWG # 22 (17 cores./0.16mm) Note : If other cables are used instead of the applicable AWG # 24 (11 cores./0.16mm) cable, contact Hirose sales department. AWG # 26 (07 cores./0.16mm) AWG # 28 (07 cores./0.127mm) AWG # 30 (07 cores./0.1mm) Applicable Cable Applicable Packaging Part Number CL No. Quantity Cable Indication Type AWG Jacket Diameter DF1E – 2022PCF 541 – 0937 – 8 Reel 10,000 20 AWG # 20 1.2 to 1.9mm 22 AWG # 22 DF1E – 2022PC 541 – 0938 – 0 Bag 100 Reel 10,000 DF1E – 2428PCF 541 – 0939 – 3 24 AWG # 24 0.9 to 1.5mm 28 AWG # 28 DF1E – 2428PC 541 – 0940 – 2 Bag 100 DF1E – 30PCF 541 – 0941 – 5 Reel 10,000 30 0.6 to 1.2mm AWG # 30 DF1E – 30PC 541 – 0942 – 8 Bag 100 Crimping Contact Extraction Tool DF-C-PO(B) B127 19.9 14.9 6.5 1.2 2.2 0.8 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Socket Crimping Contact DF1E-2022SCFDF1B - * * * * SCF 1.75 0.975 1.75 1.95 1.4 Applicable cable indicated 0.83 1.95 Applicable cable indicated 0.55 Applicable Cable (Tin plating annealed copper wire)Recommended Cable UL1061, UL1007 Conductor Size (Wire construction) AWG # 20 (21 cores./0.18mm) Strip Length 2.0mm to 2.5mm AWG # 22 (17 cores./0.16mm) Note : If other cables are used instead of the applicable AWG # 24 (11 cores./0.16mm) cable, consult Hirose sales department. AWG # 26 (07 cores./0.16mm) AWG # 28 (07 cores./0.127mm) AWG # 30 (07 cores./0.1mm) Applicable Cable Applicable Packaging Part Number CL No. Quantity Cable Indication Type AWG Jacket Diameter DF1E – 2022SCF 541 – 0999 – 5 Reel 10,000 20 AWG # 20 1.2 to 1.9mm 22 AWG # 22 DF1E – 2022SC 541 – 1000 – 2 Bag 100 DF1B – 2022SCF 541 – 0223 – 1 Reel 10,000 20 AWG # 20 1.2 to 1.9mm 22 AWG # 22 DF1B – 2022SC 541 – 0224 – 4 Bag 100 Reel 10,000 DF1B – 2428SCF 541 – 0678 – 1 24 AWG # 24 0.9 to 1.5mm 28 AWG # 28 DF1B – 2428SC 541 – 0679 – 4 Bag 100 DF1B – 30SCF 541 – 0682 – 9 Reel 10,000 30 0.6 to 1.2mm AWG # 30 DF1B – 30SC 541 – 0683 – 1 Bag 100 Crimping Contact Extraction Tool DF-C-PO(B) B128 12.9 9.4 3.35 2.55 2.4 1.6 1.4 14 9.5 6.1 2.5 1.4 1.6 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BCrimping Tools Item Part Number CL No. Applicable Contact AP105 – DF1E – 2022S 901 – 4561 – 0 DF1E – 2022SCF K AP105 – DF1B – 2022S K 901 – 4510 – 9 DF1B – 2022SCF K DF1B – 2428SCF AP105 – DF1B – 2428S K 901 – 4518 – 0 K Applicator AP105 – DF1B – 30S K 901 – 4517 – 8 DF1B – 30SCF K AP105 – DF1B – 2022P K 901 – 4509 – 0 DF1E – 2022PCF K AP105 – DF1B – 2428P K 901 – 4521 – 5 DF1E – 2428PCF K AP105 – DF1B – 30P K 901 – 4519 – 3 DF1E – 30PCF K CM – 105 K 901 – 0005 – 4 –––––– Main Press Unit HT102/DF1E – 2022S 550 – 0277 – 1 DF1E – 2022SC K DF1B – TA2022SHC K 550 – 0182 – 7 DF1B – 2022SC K DF1B – TA2428SHC K 550 – 0209 – 1 DF1B – 2428SC K Manual Crimping Tool DF1B – TA30SHC K 550 – 0211 – 3 DF1B – 30SC HT102/DF1BE – 2022P 550 – 0278 – 4 DF1E – 2022PC HT102/DF1BE – 2428P 550 – 0279 – 7 DF1E – 2428PC HT102/DF1BE – 30P 550 – 0280 – 6 DF1E – 30PCF DF1E – 2022SC (F) Contact Extraction Tool DF – C – PO (B) 550 – 0179 – 2 DF1B – * * * * SC (F) DF1E – * * * * PC (F) K Note 1. : Add "K" to the last number of the product, in order to use DF1B series tools, which have been conventionally merchandized. Note 2. : f any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products. B129 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BApplication Pattern Standard Header 8.5 DF1E _ * S _ 2.5 C DF1E _ * RS / P _ 2.5 18.8 DF1E# _ * P _ 2.5 DSA 17.3 DF1E _ * P _ 2.5 DS DF1E _ * RS / P _ 2.5 DF1E _ * S _ 2.5 C 3.7 3 10.8 14.3 Header for Potting 8 DF1E _ * S _ 2.5 C DF1E _ * RS / P _ 2.5 Potting Resin 3.2 DF1E# _ * P _ 2.5 DSA Panel Mounting Lock In-line PlugIn-line Plug 25.3 17 25.3 DF1E _ * RS / P _ 2.5 DF1E _ * RS / P _ 2.5 DF1E _ * RS / P _ 2.5 DF1E _ * RS / P _ 2.5 DF1E _ * S _ 2.5 C DF1E _ * S _ 2.5 C DF1E _ * EP _ 2.5 C DF1EA _ * EP _ 2.5 C 15.5 22.3 22.3 B130 8.1 14.3 Panel 19.8 M A X 8 15.8 9 8.5 11.7 21.3 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BPrecautions 1. Recommended Soldering Condition : Flow: 250ç for 3 seconds Manual soldering: 290ç for 2 seconds 2. Cleaning Condition : Refer to Nylon Connector Use Hand book. However, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. Connection Condition : Refer to Nylon Connector Use Hand book. 4. Cautions : To remove the connector, if the connector is forcedly removed, it will cause connector damage. If the connector is hardly removed, slightly push the connector once, and then remove it using the lock. In some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. In this case, it is recommended to use the retainer. If the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. The color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. B131