2mm Pitch Connector Directly Mounted on Board DF4 Series ■Features 1. Cost Saving for Header Thanks to the insertion/extraction socket and the harness product at the both connector edges, one of two headers necessary at both edge sockets can be saved without losing the function to separate individual boards. 2. Miniature and Multiple Contacts The miniature connector has broad variations in contact number. Board mounting height : 4.3mm (Crimping Single row ) Maximum contact number : 32 contacts (Crimping Double row ) 3. Board Pre-fixed Mechanism The insertion state to the board is a light crimping, which enables the pre-fixed process to the board. Height 4.3mm ■Applications Note PC, Small business equipment Board pre-fixed mechanism B202 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF4 Series●2mm Pitch Connector Directly Mounted on Board ■Product Specifications Current rating Crimping AWG 24 : 3A Operating Temperature Range -30 to +85ç(Note 1) AWG 26 : 2A Operating Moisture Range -40 to 80% (Note 1) Cable Size Rating AWG 28 : 1A Storage Temperature Range -10 to +60ç(Note 2) Voltage rating Crimping 250V AC Storage Moisture Range -40 to 70% Item Specification Condition 1. Insulation Resistance 1000M ohms Min 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Crimping Area Resistance 30m ohms Max. 100mA 4. Vibration No damage, cracks, or parts looseness. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle Contact resistance: 30m ohms Max Insulation resistance: 1000M ohms Min Temperature -55 ➝ 5 to 35 ➝ +85 ➝ -5 to 35ç time -30 ➝ 5 to 15 ➝ 30 ➝ -5 to 15 min under 5 cycles. 7. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Flow: 250ç for 10 seconds Note 1: The rated current will be changed according to cable sizes for use. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. ■Material Product Part Material Finish Remarks Crimping Plug Insulator Polyamide Black UL94V-0 ––––––– Crimping Contact for Plug Contact Brass Tin plating ■Ordering Information ●Connector DF4 - * P - 2 C qe w r t q Series Name: DF4 r Contact Pitch: 2mm w Number of Contact: 2 to 15, 4 to 32 t Connection Type e Connector Type C: Crimping socket P: Single row plug DP: Double row plug ●Contact DF4 - 2428- PCF qw q Applicable cable size w Packaging Type 2428 : AWG24 to 28 PCF: Plug contact/Reel PC: Plug contact/Bag B203 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF4 Series●2mm Pitch Connector Directly Mounted on Board ■Single Row Crimping Plug Photo: Contact insertion state. +0.1 ●Applicable Through-hole Diameter : Ø0.8 +0 Unit:mm Part Number CL No. Number of Contacts A B RoHS Part Number CL No. Number of Contacts A B RoHS DF4- 2P-2C 544-0003-4 2 04.5 02.0 DF4- 9P-2C 544-0010-0 09 18.5 16.0 DF4- 3P-2C 544-0004-7 3 06.5 04.0 DF4-10P-2C 544-0011-2 10 20.5 18.0 DF4- 4P-2C 544-0005-0 08.5 06.0 DF4-11P-2C 544-0012-5 22.5 4 11 20.0 DF4- 5P-2C 544-0006-2 10.5 08.0 Yes DF4-12P-2C 544-0013-8 24.5 5 12 22.0 Yes DF4- 6P-2C 544-0007-5 6 12.5 10.0 DF4-13P-2C 544-0014-0 13 26.5 24.0 DF4- 7P-2C 544-0008-8 7 14.5 12.0 DF4-14P-2C 544-0015-3 14 28.5 26.0 DF4- 8P-2C 544-0009-0 8 16.5 14.0 DF4-15P-2C 544-0016-6 15 30.5 28.0 Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag. ■Crimping Contact Part Number CL No. Packaging Type Quantity Finish RoHS DF4-2428PCF(05) 544-0020-3-05 Reel 10,000 Tin plating Yes DF4-2428PC(05) 544-0021-6-05 Bag 100 Tin plating ●Applicable Cable (Tin plating Annealed copper wire) Conductor Size Recommended Cable Jacket Diameter AWG24 (11 cores./0.16mm) UL1061 AWG 26 (7cores./0.16mm) Ø0.75 to Ø1.2mm AWG 28 (7cores./0.127mm) UL1061/1007 Note:If other cables are used instead of the applicable cable, contact Hirose sales department. ● Strip Length: 1.3 to 1.9mm BApplicable Crimping Tool Type Part Number CL No. Applicable Contact Applicator AP105-DF4-2428P 901-4539-0 DF4-2428PCF(05) ––––––– Press Main Unit CM-105 901-0005-4 Manual Crimping Tool DF4-TA2428HC 550-0173-6 DF4-2428PC(05) Extraction Tool DF-C-PO (B) 550-0179-2 DF4-2428PCF(05) Note: If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products. B204 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF4 Series●2mm Pitch Connector Directly Mounted on Board ■Double Row Crimping Plug Photo: Contact insertion state ● Applicable Through-hole Diameter Ø0.9±0.05 Note:The dip side may be deviated according to the cable thickness and the crimping contact bent up/down. Unit:mm Part Number CL No. Number of Contacts A B RoHS DF4-04DP-2C 544-0078-3 04 04.8 02.0 DF4-06DP-2C 544-0079-6 06.8 04.0 06 08.8 DF4-08DP-2C 544-0080-5 08 06.0 DF4-10DP-2C 544-0081-8 10 10.8 08.0 DF4-12DP-2C 544-0082-0 12 12.8 10.0 DF4-14DP-2C 544-0083-3 14 14.8 12.0 DF4-16DP-2C 544-0084-6 16 16.8 14.0 DF4-18DP-2C 18.8 544-0085-9 18 16.0 YES 20.8 DF4-20DP-2C 544-0086-1 20 18.0 DF4-22DP-2C 544-0087-4 22 22.8 20.0 DF4-24DP-2C 544-0088-7 24 24.8 22.0 DF4-26DP-2C 544-0089-0 26 26.8 24.0 DF4-28DP-2C 544-0090-9 28.8 26.0 28 DF4-30DP-2C 30.8 544-0091-1 30 28.0 DF4-32DP-2C 544-0092-4 32 32.8 30.0 Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag. B205 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF4 Series●2mm Pitch Connector Directly Mounted on Board BPrecautions 1. Recommended Flow: 250ç for 3 seconds 1. Soldering Condition Manual soldering: 290±10ç for 2 seconds ■ If the cable neighboring the connector is bent and unstraightened, secure a large bending radius because the Jacket will be broken by the solder heat and the contact wire will be exposed.The Jacket in this part will be tore. ■ After the soldering process. If a stress is applied to the cable in the state where the connector and the cable has heat inside, the Jacket hold area will be loosen. Therefore, carry out the post-soldering operation after the connector has returned to the room temperature.. 2. Cleaning Condition Refer to Nylon Connector Use Hand book. Don't use a solvent such ass trichloroethylene which invades the cable Jacket. In addition, avoid heat cleaning by a solvent. 3. Connection Condition Refer to the Nylon Connector Use Hand book. B206 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.